zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

BLTouch v3 / 3DTouch Interoperability & performance (#13814)

Browse source
This commit is contained in:
InsanityAutomation 2019-05-07 22:25:54 -04:00 committed by Scott Lahteine
parent 40aff7e1f2
commit 6811e2921b
107 changed files with 383 additions and 629 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

8
Marlin/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

134
Marlin/src/feature/bltouch.cpp
View file

@ -35,15 +35,32 @@ void stop();
#define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE) #define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)
#include "../core/debug_out.h" #include "../core/debug_out.h"
void BLTouch::command(const BLTCommand cmd) { bool BLTouch::command(const BLTCommand cmd, const millis_t &ms) {
//SERIAL_ECHOLNPAIR("BLTouch Command :", cmd); if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("BLTouch Command :", cmd);
MOVE_SERVO(Z_PROBE_SERVO_NR, cmd); MOVE_SERVO(Z_PROBE_SERVO_NR, cmd);
safe_delay(BLTOUCH_DELAY); safe_delay(MAX(ms, BLTOUCH_DELAY)); // BLTOUCH_DELAY is also the *minimum* delay
return triggered();
} }
void BLTouch::init() { void BLTouch::init() {
reset(); // Clear all BLTouch error conditions // This is called by marlin.cpp on initialization
stow(); // SET_5V_MODE (if enabled). OD_MODE is the default on power on.
// This mode will stay active until manual SET_OD_MODE or power cycle
#if ENABLED(BLTOUCH_FORCE_5V_MODE)
_set_5V_mode(); // Set 5V mode if explicitely demanded (V3 upwards)
#endif
clear();
// There really should be no alarm outstanding now, and no triggered condition. But if there is,
// there is no need to worry people here on init right at the start of the printer.
}
void BLTouch::clear() {
_reset(); // RESET or RESET_SW will clear an alarm condition but...
// ...it will not clear a triggered condition in SW mode when the pin is currently up
// ANTClabs <-- CODE ERROR
_stow(); // STOW will pull up the pin and clear any triggered condition unless it fails, don't care
_deploy(); // DEPLOY to test the probe. Could fail, don't care
_stow(); // STOW to be ready for meaningful work. Could fail, don't care
} }
bool BLTouch::triggered() { bool BLTouch::triggered() {
@ -56,41 +73,92 @@ bool BLTouch::triggered() {
); );
} }
bool BLTouch::set_deployed(const bool in_deploy) { bool BLTouch::deploy_proc() {
if (in_deploy && triggered()) { // If BLTouch says it's triggered // Do a DEPLOY
reset(); // try to reset it. if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch DEPLOY requested");
_deploy(); _stow(); // Deploy and stow to clear the "triggered" condition.
safe_delay(1500); // Wait for internal self-test to complete. // Attempt to DEPLOY, wait for DEPLOY_DELAY or ALARM
// (Measured completion time was 0.65 seconds if (_deploy_query_alarm()) {
// after reset, deploy, and stow sequence) // The deploy might have failed or the probe is already triggered (nozzle too low?)
if (triggered()) { // If it still claims to be triggered... if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch ALARM or TRIGGER after DEPLOY, recovering");
SERIAL_ERROR_MSG(MSG_STOP_BLTOUCH);
stop(); // punt! clear(); // Get the probe into start condition
return true;
// Last attempt to DEPLOY
if (_deploy_query_alarm()) {
// The deploy might have failed or the probe is actually triggered (nozzle too low?) again
if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch Recovery Failed");
SERIAL_ERROR_MSG(MSG_STOP_BLTOUCH); // Tell the user something is wrong, needs action
stop(); // but it's not too bad, no need to kill, allow restart
return true; // Tell our caller we goofed in case he cares to know
} }
} }
#if ENABLED(BLTOUCH_V3) // Now the probe is ready to issue a 10ms pulse when the pin goes up.
#if EITHER(BLTOUCH_FORCE_5V_MODE, ENDSTOPPULLUPS) \ // The trigger STOW (see motion.cpp for example) will pull up the probes pin as soon as the pulse
|| ALL(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, ENDSTOPPULLUP_ZMIN) \ // is registered.
|| (USES_Z_MIN_PROBE_ENDSTOP && ENABLED(ENDSTOPPULLUP_ZMIN_PROBE))
set_5V_mode(); // Assume 5V DC logic level if endstop pullup resistors are enabled
#elif true || ENABLED(BLTOUCH_FORCE_OPEN_DRAIN_MODE)
set_OD_mode();
#endif
#endif
if (in_deploy) { if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("bltouch.deploy_proc() end");
_deploy();
#if ENABLED(BLTOUCH_V3) return false; // report success to caller
set_SW_mode(); }
#endif
bool BLTouch::stow_proc() {
// Do a STOW
if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch STOW requested");
// A STOW will clear a triggered condition in the probe (10ms pulse).
// At the moment that we come in here, we might (pulse) or will (SW mode) see the trigger on the pin.
// So even though we know a STOW will be ignored if an ALARM condition is active, we will STOW.
// Note: If the probe is deployed AND in an ALARM condition, this STOW will not pull up the pin
// and the ALARM condition will still be there. --> ANTClabs should change this behaviour maybe
// Attempt to STOW, wait for STOW_DELAY or ALARM
if (_stow_query_alarm()) {
// The stow might have failed
if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch ALARM or TRIGGER after STOW, recovering");
_reset(); // This RESET will then also pull up the pin. If it doesn't
// work and the pin is still down, there will no longer be
// an ALARM condition though.
// But one more STOW will catch that
// Last attempt to STOW
if (_stow_query_alarm()) { // so if there is now STILL an ALARM condition:
if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch Recovery Failed");
SERIAL_ERROR_MSG(MSG_STOP_BLTOUCH); // Tell the user something is wrong, needs action
stop(); // but it's not too bad, no need to kill, allow restart
return true; // Tell our caller we goofed in case he cares to know
}
} }
else _stow();
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("bltouch.set_deployed(", in_deploy, ")"); if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("bltouch.stow_proc() end");
return false; return false; // report success to caller
}
bool BLTouch::status_proc() {
/**
* Return a TRUE for "YES, it is DEPLOYED"
* This function will ensure switch state is reset after execution
* This may change pin position in some scenarios, specifically
* if the pin has been triggered but not yet stowed.
*/
if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch STATUS requested");
_set_SW_mode();
const bool tr = triggered(); // If triggered in SW mode, the pin is up, it is STOWED
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("BLTouch is ", (int)tr);
_reset(); // turn off the SW Mode
if (tr) _stow(); else _deploy(); // and reset any triggered signal, restore state
return !tr;
} }
#endif // BLTOUCH #endif // BLTOUCH

78
Marlin/src/feature/bltouch.h
View file

@ -26,37 +26,75 @@
// BLTouch commands are sent as servo angles // BLTouch commands are sent as servo angles
typedef unsigned char BLTCommand; typedef unsigned char BLTCommand;
#define BLTOUCH_DEPLOY 10 #define BLTOUCH_DEPLOY 10
#define BLTOUCH_SW_MODE 60 #define BLTOUCH_SW_MODE 60
#define BLTOUCH_STOW 90 #define BLTOUCH_STOW 90
#define BLTOUCH_SELFTEST 120 #define BLTOUCH_SELFTEST 120
#define BLTOUCH_5V_MODE 140 #define BLTOUCH_5V_MODE 140
#define BLTOUCH_OD_MODE 150 #define BLTOUCH_OD_MODE 150
#define BLTOUCH_RESET 160 #define BLTOUCH_RESET 160
/**
* The following commands may require different delays.
*
* ANTClabs recommends 2000ms for 5V/OD commands. However it is
* not common for other commands to immediately follow these,
* and testing has shown that these complete in 500ms reliably.
*
* AntClabs recommends 750ms for Deploy/Stow, otherwise you will
* not catch an alarm state until the following move command.
*/
#ifndef BLTOUCH_SET5V_DELAY
#define BLTOUCH_SET5V_DELAY BLTOUCH_DELAY
#endif
#ifndef BLTOUCH_SETOD_DELAY
#define BLTOUCH_SETOD_DELAY BLTOUCH_DELAY
#endif
#ifndef BLTOUCH_DEPLOY_DELAY
#define BLTOUCH_DEPLOY_DELAY 750
#endif
#ifndef BLTOUCH_STOW_DELAY
#define BLTOUCH_STOW_DELAY 750
#endif
#ifndef BLTOUCH_RESET_DELAY
#define BLTOUCH_RESET_DELAY BLTOUCH_DELAY
#endif
class BLTouch { class BLTouch {
public: public:
static void init(); static bool triggered(); // used by menu_advanced.cpp
static void command(const BLTCommand cmd); static void init(); // used by main.cpp
static bool triggered();
FORCE_INLINE static void reset() { command(BLTOUCH_RESET); } // DEPLOY and STOW are wrapped for error handling - these are used by homing and by probing
FORCE_INLINE static void selftest() { command(BLTOUCH_SELFTEST); } FORCE_INLINE static bool deploy() { return deploy_proc(); }
FORCE_INLINE static bool stow() { return stow_proc(); }
FORCE_INLINE static bool status() { return status_proc(); }
FORCE_INLINE static void set_5V_mode() { command(BLTOUCH_5V_MODE); } // Native BLTouch commands ("Underscore"...), used in lcd menus and internally
FORCE_INLINE static void set_OD_mode() { command(BLTOUCH_OD_MODE); } FORCE_INLINE static void _reset() { command(BLTOUCH_RESET, BLTOUCH_RESET_DELAY); }
FORCE_INLINE static void set_SW_mode() { command(BLTOUCH_SW_MODE); }
FORCE_INLINE static bool deploy() { return set_deployed(true); } FORCE_INLINE static void _selftest() { command(BLTOUCH_SELFTEST, BLTOUCH_DELAY); }
FORCE_INLINE static bool stow() { return set_deployed(false); }
FORCE_INLINE static void _deploy() { command(BLTOUCH_DEPLOY); } FORCE_INLINE static void _set_SW_mode() { command(BLTOUCH_SW_MODE, BLTOUCH_DELAY); }
FORCE_INLINE static void _stow() { command(BLTOUCH_STOW); } FORCE_INLINE static void _set_5V_mode() { command(BLTOUCH_5V_MODE, BLTOUCH_SET5V_DELAY); }
FORCE_INLINE static void _set_OD_mode() { command(BLTOUCH_OD_MODE, BLTOUCH_SETOD_DELAY); }
FORCE_INLINE static void _deploy() { command(BLTOUCH_DEPLOY, BLTOUCH_DEPLOY_DELAY); }
FORCE_INLINE static void _stow() { command(BLTOUCH_STOW, BLTOUCH_STOW_DELAY); }
private: private:
static bool set_deployed(const bool deploy); FORCE_INLINE static bool _deploy_query_alarm() { return command(BLTOUCH_DEPLOY, BLTOUCH_DEPLOY_DELAY); }
FORCE_INLINE static bool _stow_query_alarm() { return command(BLTOUCH_STOW, BLTOUCH_STOW_DELAY); }
static void clear();
static bool command(const BLTCommand cmd, const millis_t &ms);
static bool deploy_proc();
static bool stow_proc();
static bool status_proc();
}; };
// Deploy/stow angles for use by servo.cpp / servo.h
#define BLTOUCH_ANGLES { BLTOUCH_DEPLOY, BLTOUCH_STOW } #define BLTOUCH_ANGLES { BLTOUCH_DEPLOY, BLTOUCH_STOW }
extern BLTouch bltouch; extern BLTouch bltouch;

3
Marlin/src/gcode/calibrate/G34_M422.cpp
View file

@ -112,8 +112,7 @@ void GcodeSuite::G34() {
#endif #endif
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
bltouch.reset(); bltouch.init();
bltouch.stow();
#endif #endif
// Always home with tool 0 active // Always home with tool 0 active

3
Marlin/src/inc/Conditionals_LCD.h
View file

@ -465,9 +465,6 @@
#undef SERVO_DELAY #undef SERVO_DELAY
#define SERVO_DELAY { 50 } #define SERVO_DELAY { 50 }
#endif #endif
#ifndef BLTOUCH_DELAY
#define BLTOUCH_DELAY 375
#endif
// Always disable probe pin inverting for BLTouch // Always disable probe pin inverting for BLTouch
#undef Z_MIN_PROBE_ENDSTOP_INVERTING #undef Z_MIN_PROBE_ENDSTOP_INVERTING

3
Marlin/src/inc/Conditionals_post.h
View file

@ -1578,6 +1578,9 @@
#ifndef Z_CLEARANCE_MULTI_PROBE #ifndef Z_CLEARANCE_MULTI_PROBE
#define Z_CLEARANCE_MULTI_PROBE Z_CLEARANCE_BETWEEN_PROBES #define Z_CLEARANCE_MULTI_PROBE Z_CLEARANCE_BETWEEN_PROBES
#endif #endif
#if ENABLED(BLTOUCH) && !defined(BLTOUCH_DELAY)
#define BLTOUCH_DELAY 500
#endif
#endif #endif
#ifndef __SAM3X8E__ //todo: hal: broken hal encapsulation #ifndef __SAM3X8E__ //todo: hal: broken hal encapsulation

12
Marlin/src/inc/SanityCheck.h
View file

@ -210,6 +210,10 @@
#error "UBL_MESH_EDITING is now G26_MESH_VALIDATION. Please update your configuration." #error "UBL_MESH_EDITING is now G26_MESH_VALIDATION. Please update your configuration."
#elif defined(BLTOUCH_HEATERS_OFF) #elif defined(BLTOUCH_HEATERS_OFF)
#error "BLTOUCH_HEATERS_OFF is now PROBING_HEATERS_OFF. Please update your configuration." #error "BLTOUCH_HEATERS_OFF is now PROBING_HEATERS_OFF. Please update your configuration."
#elif defined(BLTOUCH_V3)
#error "BLTOUCH_V3 is obsolete. Please update your configuration."
#elif defined(BLTOUCH_FORCE_OPEN_DRAIN_MODE)
#error "BLTOUCH_FORCE_OPEN_DRAIN_MODE is obsolete. Please update your configuration."
#elif defined(BEEPER) #elif defined(BEEPER)
#error "BEEPER is now BEEPER_PIN. Please update your pins definitions." #error "BEEPER is now BEEPER_PIN. Please update your pins definitions."
#elif defined(SDCARDDETECT) #elif defined(SDCARDDETECT)
@ -1018,6 +1022,14 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#endif #endif
#endif #endif
#if ENABLED(BLTOUCH)
#if BLTOUCH_DELAY < 200
#error "BLTOUCH_DELAY less than 200 is unsafe and is not supported."
#elif DISABLED(BLTOUCH_FORCE_5V_MODE) && NONE(ENDSTOPPULLUPS, ENDSTOPPULLUP_ZMIN, ENDSTOPPULLUP_ZMIN_PROBE)
#error "BLTOUCH without BLTOUCH_FORCE_5V_MODE requires ENDSTOPPULLUPS, ENDSTOPPULLUP_ZMIN or ENDSTOPPULLUP_ZMIN_PROBE."
#endif
#endif
#if ENABLED(RACK_AND_PINION_PROBE) && !(defined(Z_PROBE_DEPLOY_X) && defined(Z_PROBE_RETRACT_X)) #if ENABLED(RACK_AND_PINION_PROBE) && !(defined(Z_PROBE_DEPLOY_X) && defined(Z_PROBE_RETRACT_X))
#error "RACK_AND_PINION_PROBE requires Z_PROBE_DEPLOY_X and Z_PROBE_RETRACT_X." #error "RACK_AND_PINION_PROBE requires Z_PROBE_DEPLOY_X and Z_PROBE_RETRACT_X."
#endif #endif

2
Marlin/src/lcd/language/language_en.h
View file

@ -904,7 +904,7 @@
#define MSG_BLTOUCH_DEPLOY _UxGT("Deploy BLTouch") #define MSG_BLTOUCH_DEPLOY _UxGT("Deploy BLTouch")
#endif #endif
#ifndef MSG_BLTOUCH_SW_MODE #ifndef MSG_BLTOUCH_SW_MODE
#define MSG_BLTOUCH_SW_MODE _UxGT("SW Deploy BLTouch") #define MSG_BLTOUCH_SW_MODE _UxGT("BLTouch SW Mode")
#endif #endif
#ifndef MSG_BLTOUCH_5V_MODE #ifndef MSG_BLTOUCH_5V_MODE
#define MSG_BLTOUCH_5V_MODE _UxGT("BLTouch 5V Mode") #define MSG_BLTOUCH_5V_MODE _UxGT("BLTouch 5V Mode")

12
Marlin/src/lcd/menu/menu_configuration.cpp
View file

@ -174,15 +174,13 @@ static void lcd_factory_settings() {
void menu_bltouch() { void menu_bltouch() {
START_MENU(); START_MENU();
MENU_BACK(MSG_MAIN); MENU_BACK(MSG_MAIN);
MENU_ITEM(function, MSG_BLTOUCH_RESET, bltouch.reset); MENU_ITEM(function, MSG_BLTOUCH_RESET, bltouch._reset);
MENU_ITEM(function, MSG_BLTOUCH_SELFTEST, bltouch.selftest); MENU_ITEM(function, MSG_BLTOUCH_SELFTEST, bltouch._selftest);
MENU_ITEM(function, MSG_BLTOUCH_DEPLOY, bltouch._deploy); MENU_ITEM(function, MSG_BLTOUCH_DEPLOY, bltouch._deploy);
MENU_ITEM(function, MSG_BLTOUCH_STOW, bltouch._stow); MENU_ITEM(function, MSG_BLTOUCH_STOW, bltouch._stow);
#if ENABLED(BLTOUCH_V3) MENU_ITEM(function, MSG_BLTOUCH_SW_MODE, bltouch._set_SW_mode);
MENU_ITEM(function, MSG_BLTOUCH_SW_MODE, bltouch.set_SW_mode); MENU_ITEM(function, MSG_BLTOUCH_5V_MODE, bltouch._set_5V_mode);
MENU_ITEM(function, MSG_BLTOUCH_5V_MODE, bltouch.set_5V_mode); MENU_ITEM(function, MSG_BLTOUCH_OD_MODE, bltouch._set_OD_mode);
MENU_ITEM(function, MSG_BLTOUCH_OD_MODE, bltouch.set_OD_mode);
#endif
END_MENU(); END_MENU();
} }

11
Marlin/src/module/endstops.cpp
View file

@ -40,6 +40,10 @@
#include "printcounter.h" // for print_job_timer #include "printcounter.h" // for print_job_timer
#endif #endif
#if ENABLED(BLTOUCH)
#include "../feature/bltouch.h"
#endif
Endstops endstops; Endstops endstops;
// private: // private:
@ -381,6 +385,9 @@ static void print_es_state(const bool is_hit, PGM_P const label=NULL) {
} }
void _O2 Endstops::M119() { void _O2 Endstops::M119() {
#if ENABLED(BLTOUCH)
bltouch._set_SW_mode();
#endif
SERIAL_ECHOLNPGM(MSG_M119_REPORT); SERIAL_ECHOLNPGM(MSG_M119_REPORT);
#define ES_REPORT(S) print_es_state(READ(S##_PIN) != S##_ENDSTOP_INVERTING, PSTR(MSG_##S)) #define ES_REPORT(S) print_es_state(READ(S##_PIN) != S##_ENDSTOP_INVERTING, PSTR(MSG_##S))
#if HAS_X_MIN #if HAS_X_MIN
@ -457,6 +464,10 @@ void _O2 Endstops::M119() {
} }
#endif #endif
#endif #endif
#if ENABLED(BLTOUCH)
bltouch._reset();
if (enabled_globally) bltouch._stow();
#endif
} // Endstops::M119 } // Endstops::M119
// The following routines are called from an ISR context. It could be the temperature ISR, the // The following routines are called from an ISR context. It could be the temperature ISR, the

2
Marlin/src/module/probe.cpp
View file

@ -283,7 +283,7 @@ float zprobe_zoffset; // Initialized by settings.load()
#endif #endif
#if ENABLED(PROBING_STEPPERS_OFF) #if ENABLED(PROBING_STEPPERS_OFF)
disable_e_steppers(); disable_e_steppers();
#if DISABLED(DELTA) #if DISABLED(DELTA, HOME_AFTER_DEACTIVATE)
disable_X(); disable_Y(); disable_X(); disable_Y();
#endif #endif
#endif #endif

2
buildroot/share/tests/DUE-tests
View file

@ -16,7 +16,7 @@ exec_test $1 $2 "RAMPS4DUE_EFB with S_CURVE_ACCELERATION, EEPROM_SETTINGS, GCODE
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_RADDS opt_set MOTHERBOARD BOARD_RADDS
opt_enable USE_XMAX_PLUG USE_YMAX_PLUG BLTOUCH AUTO_BED_LEVELING_BILINEAR \ opt_enable USE_XMAX_PLUG USE_YMAX_PLUG BLTOUCH AUTO_BED_LEVELING_BILINEAR \
Z_TRIPLE_STEPPER_DRIVERS Z_TRIPLE_ENDSTOPS Z_STEPPER_AUTO_ALIGN Z_TRIPLE_STEPPER_DRIVERS Z_TRIPLE_ENDSTOPS Z_STEPPER_AUTO_ALIGN ENDSTOPPULLUPS
opt_add Z2_MAX_ENDSTOP_INVERTING false opt_add Z2_MAX_ENDSTOP_INVERTING false
opt_add Z3_MAX_ENDSTOP_INVERTING false opt_add Z3_MAX_ENDSTOP_INVERTING false
pins_set RAMPS X_MAX_PIN -1 pins_set RAMPS X_MAX_PIN -1

2
buildroot/share/tests/megaatmega2560-tests
View file

@ -273,7 +273,7 @@ exec_test $1 $2 "Full-featured CR-10S config"
# #
# Delta Config (generic) + ABL bilinear + BLTOUCH # Delta Config (generic) + ABL bilinear + BLTOUCH
use_example_configs delta/generic use_example_configs delta/generic
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR BLTOUCH BLTOUCH_V3 opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR BLTOUCH BLTOUCH_FORCE_5V_MODE
exec_test $1 $2 "Delta Config (generic) + ABL bilinear + BLTOUCH" exec_test $1 $2 "Delta Config (generic) + ABL bilinear + BLTOUCH"
# #
# Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS # Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS

8
config/default/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/3DFabXYZ/Migbot/Configuration.h
View file

@ -834,18 +834,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/AlephObjects/TAZ4/Configuration.h
View file

@ -848,18 +848,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/AliExpress/CL-260/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/AliExpress/UM2pExt/Configuration.h
View file

@ -839,18 +839,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Anet/A2/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Anet/A2plus/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Anet/A6/Configuration.h
View file

@ -875,18 +875,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Anet/A8/Configuration.h
View file

@ -841,18 +841,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/AnyCubic/i3/Configuration.h
View file

@ -838,18 +838,14 @@
*/ */
#define BLTOUCH #define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/ArmEd/Configuration.h
View file

@ -829,18 +829,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Azteeg/X5GT/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/BIBO/TouchX/cyclops/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/BIBO/TouchX/default/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/BQ/Hephestos/Configuration.h
View file

@ -816,18 +816,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/BQ/Hephestos_2/Configuration.h
View file

@ -829,18 +829,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/BQ/WITBOX/Configuration.h
View file

@ -816,18 +816,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Cartesio/Configuration.h
View file

@ -827,18 +827,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Creality/CR-10/Configuration.h
View file

@ -838,18 +838,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 #define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Creality/CR-10S/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 #define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Creality/CR-10_5S/Configuration.h
View file

@ -829,18 +829,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 #define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Creality/CR-10mini/Configuration.h
View file

@ -847,18 +847,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 #define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Creality/CR-8/Configuration.h
View file

@ -838,18 +838,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 #define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Creality/Ender-2/Configuration.h
View file

@ -832,18 +832,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 #define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Creality/Ender-3/Configuration.h
View file

@ -832,18 +832,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 #define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Creality/Ender-4/Configuration.h
View file

@ -838,18 +838,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 #define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Einstart-S/Configuration.h
View file

@ -837,18 +837,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Felix/Configuration.h
View file

@ -810,18 +810,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Felix/DUAL/Configuration.h
View file

@ -810,18 +810,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/FlashForge/CreatorPro/Configuration.h
View file

@ -820,18 +820,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/FolgerTech/i3-2020/Configuration.h
View file

@ -834,18 +834,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Formbot/Raptor/Configuration.h
View file

@ -911,18 +911,14 @@
*/ */
#define BLTOUCH #define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Formbot/T_Rex_2+/Configuration.h
View file

@ -857,18 +857,14 @@
*/ */
#define BLTOUCH #define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif

8
config/examples/Formbot/T_Rex_3/Configuration.h
View file

@ -844,18 +844,14 @@
*/ */
#define BLTOUCH #define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Geeetech/A10M/Configuration.h
View file

@ -811,18 +811,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Geeetech/A20M/Configuration.h
View file

@ -811,18 +811,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Geeetech/GT2560/Configuration.h
View file

@ -843,18 +843,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

2
config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
View file

@ -828,7 +828,7 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Geeetech/MeCreator2/Configuration.h
View file

@ -835,18 +835,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
View file

@ -848,18 +848,14 @@
*/ */
#define BLTOUCH #define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
View file

@ -848,18 +848,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Infitary/i3-M508/Configuration.h
View file

@ -832,18 +832,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/JGAurora/A5/Configuration.h
View file

@ -840,18 +840,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/MakerParts/Configuration.h
View file

@ -848,18 +848,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Malyan/M150/Configuration.h
View file

@ -848,18 +848,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Malyan/M200/Configuration.h
View file

@ -827,18 +827,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Micromake/C1/basic/Configuration.h
View file

@ -832,18 +832,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Micromake/C1/enhanced/Configuration.h
View file

@ -832,18 +832,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Mks/Robin/Configuration.h
View file

@ -829,18 +829,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Mks/Sbase/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Printrbot/PrintrboardG2/Configuration.h
View file

@ -836,18 +836,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/RapideLite/RL200/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/RepRapPro/Huxley/Configuration.h
View file

@ -868,18 +868,14 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/RepRapWorld/Megatronics/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/RigidBot/Configuration.h
View file

@ -826,18 +826,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/SCARA/Configuration.h
View file

@ -841,18 +841,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/STM32/Black_STM32F407VET6/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/STM32/STM32F10/Configuration.h
View file

@ -830,18 +830,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/STM32/STM32F4/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/STM32/stm32f103ret6/Configuration.h
View file

@ -830,18 +830,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Sanguinololu/Configuration.h
View file

@ -859,18 +859,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/TheBorg/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/TinyBoy2/Configuration.h
View file

@ -879,18 +879,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Tronxy/X1/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Tronxy/X3A/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Tronxy/X5S-2E/Configuration.h
View file

@ -849,18 +849,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Tronxy/X5S/Configuration.h
View file

@ -827,18 +827,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Tronxy/XY100/Configuration.h
View file

@ -839,18 +839,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/UltiMachine/Archim1/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/UltiMachine/Archim2/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/VORONDesign/Configuration.h
View file

@ -837,18 +837,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Velleman/K8200/Configuration.h
View file

@ -857,18 +857,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Velleman/K8400/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Velleman/K8400/Dual-head/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/WASP/PowerWASP/Configuration.h
View file

@ -847,18 +847,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/Wanhao/Duplicator 6/Configuration.h
View file

@ -838,18 +838,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/adafruit/ST7565/Configuration.h
View file

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/delta/Anycubic/Kossel/Configuration.h
View file

@ -964,18 +964,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/delta/FLSUN/auto_calibrate/Configuration.h
View file

@ -910,18 +910,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/delta/FLSUN/kossel/Configuration.h
View file

@ -910,18 +910,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/delta/FLSUN/kossel_mini/Configuration.h
View file

@ -910,18 +910,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/delta/Geeetech/Rostock 301/Configuration.h
View file

@ -900,18 +900,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/delta/Hatchbox_Alpha/Configuration.h
View file

@ -915,18 +915,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

8
config/examples/delta/MKS/SBASE/Configuration.h
View file

@ -900,18 +900,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

2
config/examples/delta/Tevo Little Monster/Configuration.h
View file

@ -904,7 +904,7 @@
*/ */
#define BLTOUCH #define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed #define BLTOUCH_DELAY 500 // (ms) Enable and increase if needed
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

Some files were not shown because too many files have changed in this diff Show more