diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h
index 53e68c5ab1..e54c059c6a 100644
--- a/Marlin/src/inc/Conditionals_LCD.h
+++ b/Marlin/src/inc/Conditionals_LCD.h
@@ -461,7 +461,7 @@
   #define HAS_DGUS_LCD_CLASSIC 1
 #endif
 
-#if ANY(HAS_DGUS_LCD_CLASSIC, DGUS_LCD_UI_RELOADED)
+#if EITHER(HAS_DGUS_LCD_CLASSIC, DGUS_LCD_UI_RELOADED)
   #define HAS_DGUS_LCD 1
 #endif
 
@@ -1353,7 +1353,7 @@
   #define TFT_DEFAULT_ORIENTATION 0
   #define TFT_RES_480x272
   #define TFT_INTERFACE_FSMC
-#elif ANY(MKS_ROBIN_TFT_V1_1R, LONGER_LK_TFT28)                               // ILI9328 or R61505
+#elif EITHER(MKS_ROBIN_TFT_V1_1R, LONGER_LK_TFT28)                            // ILI9328 or R61505
   #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y)
   #define TFT_RES_320x240
   #define TFT_INTERFACE_FSMC
diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h
index dd6b165328..e581bb47c0 100644
--- a/Marlin/src/inc/Conditionals_post.h
+++ b/Marlin/src/inc/Conditionals_post.h
@@ -48,7 +48,7 @@
   // Set additional flags to let HALs choose in their Conditionals_post.h
   #if ANY(FLASH_EEPROM_EMULATION, SRAM_EEPROM_EMULATION, SDCARD_EEPROM_EMULATION, QSPI_EEPROM)
     #define USE_EMULATED_EEPROM 1
-  #elif ANY(I2C_EEPROM, SPI_EEPROM)
+  #elif EITHER(I2C_EEPROM, SPI_EEPROM)
     #define USE_WIRED_EEPROM    1
   #elif ENABLED(IIC_BL24CXX_EEPROM)
     // nothing
diff --git a/Marlin/src/lcd/e3v2/marlinui/ui_common.cpp b/Marlin/src/lcd/e3v2/marlinui/ui_common.cpp
index 455fce272a..ab21c7be4a 100644
--- a/Marlin/src/lcd/e3v2/marlinui/ui_common.cpp
+++ b/Marlin/src/lcd/e3v2/marlinui/ui_common.cpp
@@ -565,7 +565,7 @@ void MarlinUI::draw_status_message(const bool blink) {
 
   #endif // AUTO_BED_LEVELING_UBL
 
-  #if ANY(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY)
+  #if EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY)
 
     void MarlinUI::zoffset_overlay(const int8_t dir) {
       const int rot_up = TERN(OVERLAY_GFX_REVERSE, ICON_RotateCCW, ICON_RotateCW),
diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.cpp
index a796c8edcf..662753a154 100644
--- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.cpp
+++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.cpp
@@ -1208,7 +1208,7 @@ void CLCD::default_display_orientation() {
       + ENABLED(TOUCH_UI_INVERTED) * 1
     );
     cmd.execute();
-  #elif ANY(TOUCH_UI_PORTRAIT, TOUCH_UI_MIRRORED)
+  #elif EITHER(TOUCH_UI_PORTRAIT, TOUCH_UI_MIRRORED)
     #error "PORTRAIT or MIRRORED orientation not supported on the FT800."
   #elif ENABLED(TOUCH_UI_INVERTED)
     mem_write_32(REG::ROTATE, 1);
diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/colors.h b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/colors.h
index 995379fcda..70c2be4ec2 100644
--- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/colors.h
+++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/colors.h
@@ -37,14 +37,14 @@ namespace Theme {
   #else
     // Use linear accent colors
 
-    #if ANY(TOUCH_UI_ROYAL_THEME, TOUCH_UI_FROZEN_THEME)
-        // Dark blue accent colors
-        constexpr int      accent_hue       = 216;
-        constexpr float    accent_sat       = 0.7;
+    #if EITHER(TOUCH_UI_ROYAL_THEME, TOUCH_UI_FROZEN_THEME)
+      // Dark blue accent colors
+      constexpr int      accent_hue       = 216;
+      constexpr float    accent_sat       = 0.7;
     #else
-        // Green accent colors
-        constexpr int      accent_hue       = 68;
-        constexpr float    accent_sat       = 0.68;
+      // Green accent colors
+      constexpr int      accent_hue       = 68;
+      constexpr float    accent_sat       = 0.68;
     #endif
 
     // Shades of accent color
@@ -88,7 +88,7 @@ namespace Theme {
 
     constexpr uint32_t bed_mesh_lines_rgb   = 0xFFFFFF;
     constexpr uint32_t bed_mesh_shadow_rgb  = 0x444444;
-  #elif ANY(TOUCH_UI_COCOA_THEME, TOUCH_UI_FROZEN_THEME)
+  #elif EITHER(TOUCH_UI_COCOA_THEME, TOUCH_UI_FROZEN_THEME)
     constexpr uint32_t theme_darkest        = accent_color_1;
     constexpr uint32_t theme_dark           = accent_color_4;
 
diff --git a/Marlin/src/libs/nozzle.cpp b/Marlin/src/libs/nozzle.cpp
index 4ca8fa2cae..575e74a814 100644
--- a/Marlin/src/libs/nozzle.cpp
+++ b/Marlin/src/libs/nozzle.cpp
@@ -161,7 +161,7 @@ Nozzle nozzle;
   void Nozzle::clean(const uint8_t &pattern, const uint8_t &strokes, const_float_t radius, const uint8_t &objects, const uint8_t cleans) {
     xyz_pos_t start[HOTENDS] = NOZZLE_CLEAN_START_POINT, end[HOTENDS] = NOZZLE_CLEAN_END_POINT, middle[HOTENDS] = NOZZLE_CLEAN_CIRCLE_MIDDLE;
 
-    const uint8_t arrPos = ANY(SINGLENOZZLE, MIXING_EXTRUDER) ? 0 : active_extruder;
+    const uint8_t arrPos = EITHER(SINGLENOZZLE, MIXING_EXTRUDER) ? 0 : active_extruder;
 
     #if NOZZLE_CLEAN_MIN_TEMP > 20
       if (thermalManager.degTargetHotend(arrPos) < NOZZLE_CLEAN_MIN_TEMP) {
diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp
index 519a94d738..89bd8b8042 100644
--- a/Marlin/src/module/probe.cpp
+++ b/Marlin/src/module/probe.cpp
@@ -48,7 +48,7 @@
   #include "delta.h"
 #endif
 
-#if ANY(HAS_QUIET_PROBING, USE_SENSORLESS)
+#if EITHER(HAS_QUIET_PROBING, USE_SENSORLESS)
   #include "stepper/indirection.h"
   #if BOTH(HAS_QUIET_PROBING, PROBING_ESTEPPERS_OFF)
     #include "stepper.h"
diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp
index acbc02fd3b..435c98d56a 100644
--- a/Marlin/src/module/temperature.cpp
+++ b/Marlin/src/module/temperature.cpp
@@ -904,7 +904,7 @@ volatile bool Temperature::raw_temps_ready = false;
         temp_hotend[active_extruder].target = 0.0f;
         temp_hotend[active_extruder].soft_pwm_amount = 0;
         #if HAS_FAN
-          set_fan_speed(ANY(MPC_FAN_0_ALL_HOTENDS, MPC_FAN_0_ACTIVE_HOTEND) ? 0 : active_extruder, 0);
+          set_fan_speed(EITHER(MPC_FAN_0_ALL_HOTENDS, MPC_FAN_0_ACTIVE_HOTEND) ? 0 : active_extruder, 0);
           planner.sync_fan_speeds(fan_speed);
         #endif
 
@@ -922,7 +922,7 @@ volatile bool Temperature::raw_temps_ready = false;
     disable_all_heaters();
     #if HAS_FAN
       zero_fan_speeds();
-      set_fan_speed(ANY(MPC_FAN_0_ALL_HOTENDS, MPC_FAN_0_ACTIVE_HOTEND) ? 0 : active_extruder, 255);
+      set_fan_speed(EITHER(MPC_FAN_0_ALL_HOTENDS, MPC_FAN_0_ACTIVE_HOTEND) ? 0 : active_extruder, 255);
       planner.sync_fan_speeds(fan_speed);
     #endif
     const xyz_pos_t tuningpos = MPC_TUNING_POS;
@@ -949,7 +949,7 @@ volatile bool Temperature::raw_temps_ready = false;
     }
 
     #if HAS_FAN
-      set_fan_speed(ANY(MPC_FAN_0_ALL_HOTENDS, MPC_FAN_0_ACTIVE_HOTEND) ? 0 : active_extruder, 0);
+      set_fan_speed(EITHER(MPC_FAN_0_ALL_HOTENDS, MPC_FAN_0_ACTIVE_HOTEND) ? 0 : active_extruder, 0);
       planner.sync_fan_speeds(fan_speed);
     #endif
 
@@ -1031,7 +1031,7 @@ volatile bool Temperature::raw_temps_ready = false;
           total_energy_fan0 += constants.heater_power * hotend.soft_pwm_amount / 127 * MPC_dT + (last_temp - current_temp) * constants.block_heat_capacity;
         #if HAS_FAN
           else if (ELAPSED(ms, test_end_ms) && !fan0_done) {
-            set_fan_speed(ANY(MPC_FAN_0_ALL_HOTENDS, MPC_FAN_0_ACTIVE_HOTEND) ? 0 : active_extruder, 255);
+            set_fan_speed(EITHER(MPC_FAN_0_ALL_HOTENDS, MPC_FAN_0_ACTIVE_HOTEND) ? 0 : active_extruder, 255);
             planner.sync_fan_speeds(fan_speed);
             settle_end_ms = ms + settle_time;
             test_end_ms = settle_end_ms + test_duration;
@@ -1433,7 +1433,7 @@ void Temperature::min_temp_error(const heater_id_t heater_id) {
 
       float ambient_xfer_coeff = constants.ambient_xfer_coeff_fan0;
       #if ENABLED(MPC_INCLUDE_FAN)
-        const uint8_t fan_index = ANY(MPC_FAN_0_ACTIVE_HOTEND, MPC_FAN_0_ALL_HOTENDS) ? 0 : ee;
+        const uint8_t fan_index = EITHER(MPC_FAN_0_ACTIVE_HOTEND, MPC_FAN_0_ALL_HOTENDS) ? 0 : ee;
         const float fan_fraction = TERN_(MPC_FAN_0_ACTIVE_HOTEND, !this_hotend ? 0.0f : ) fan_speed[fan_index] * RECIPROCAL(255);
         ambient_xfer_coeff += fan_fraction * constants.fan255_adjustment;
       #endif
diff --git a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h
index 7953f678fa..9e2eedd68e 100644
--- a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h
+++ b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h
@@ -582,7 +582,7 @@
       #define LCD_SDSS                      SDSS
       #define SD_DETECT_PIN                   49
 
-    #elif ANY(VIKI2, miniVIKI)
+    #elif EITHER(VIKI2, miniVIKI)
 
       #define DOGLCD_CS                       45
       #define DOGLCD_A0                       44
diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h
index 7f9e530f3c..cf12a98aef 100644
--- a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h
+++ b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h
@@ -238,7 +238,7 @@
   #define LCD_SDSS                         P0_28  // EXP2.4
   #define LCD_PINS_ENABLE                  P0_18  // EXP1.3
   #define LCD_PINS_D4                      P0_15  // EXP1.5
-  #if ANY(VIKI2, miniVIKI)
+  #if EITHER(VIKI2, miniVIKI)
     #define DOGLCD_SCK                SD_SCK_PIN
     #define DOGLCD_MOSI              SD_MOSI_PIN
   #endif
diff --git a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h
index b08ac536b3..0ebdb53884 100644
--- a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h
+++ b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h
@@ -349,7 +349,7 @@
     //#define SHIFT_EN_PIN                 P1_22  // (41)  J5-4 & AUX-4
   #endif
 
-  #if ANY(VIKI2, miniVIKI)
+  #if EITHER(VIKI2, miniVIKI)
     #define DOGLCD_CS                      P0_16  // (16)
     #define DOGLCD_A0                      P2_06  // (59) J3-8 & AUX-2
     #define DOGLCD_SCK                SD_SCK_PIN
diff --git a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h
index 7ce78ad283..bc7cada8da 100644
--- a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h
+++ b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h
@@ -107,7 +107,7 @@
 // Display
 //
 
-#if ANY(VIKI2, miniVIKI)
+#if EITHER(VIKI2, miniVIKI)
   #define BEEPER_PIN                       P1_31
   #define DOGLCD_A0                        P2_06
   #define DOGLCD_CS                        P0_16
diff --git a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h
index 4fbc19eed8..c33fe6e28f 100644
--- a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h
+++ b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h
@@ -154,7 +154,7 @@
       //#define SHIFT_EN_PIN               P1_22  // (41)  J5-4 & AUX-4
     #endif
 
-    #if ANY(VIKI2, miniVIKI)
+    #if EITHER(VIKI2, miniVIKI)
       #define BEEPER_PIN                   P1_30  // (37) may change if cable changes
       #define DOGLCD_CS                    P0_26  // (63) J5-3 & AUX-2
       #define DOGLCD_SCK              SD_SCK_PIN
diff --git a/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h b/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h
index e80116efd0..cfaca164f8 100644
--- a/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h
+++ b/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h
@@ -91,7 +91,7 @@
 //
 // LCD / Controller
 //
-#if ANY(VIKI2, miniVIKI)
+#if EITHER(VIKI2, miniVIKI)
 
   #define BEEPER_PIN                       P1_31
   #define DOGLCD_A0                        P2_11
diff --git a/Marlin/src/pins/rambo/pins_RAMBO.h b/Marlin/src/pins/rambo/pins_RAMBO.h
index 5484b193b9..cb7a059134 100644
--- a/Marlin/src/pins/rambo/pins_RAMBO.h
+++ b/Marlin/src/pins/rambo/pins_RAMBO.h
@@ -208,7 +208,7 @@
     #define LCD_PINS_D6                       74
     #define LCD_PINS_D7                       75
 
-    #if ANY(VIKI2, miniVIKI)
+    #if EITHER(VIKI2, miniVIKI)
       #define BEEPER_PIN                      44
       // NB: Panucatt's Viki 2.0 wiring diagram (v1.2) indicates that the
       //     beeper/buzzer is connected to pin 33; however, the pin used in the
diff --git a/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h b/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h
index 4c2645e64b..533284a4bf 100644
--- a/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h
+++ b/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h
@@ -143,7 +143,7 @@
 
 #define HOME_PIN                        BTN_HOME
 
-#if ANY(VIKI2, miniVIKI)
+#if EITHER(VIKI2, miniVIKI)
   #define BEEPER_PIN                          44
   // Pins for DOGM SPI LCD Support
   #define DOGLCD_A0                           70
diff --git a/Marlin/src/pins/ramps/pins_AZTEEG_X3.h b/Marlin/src/pins/ramps/pins_AZTEEG_X3.h
index ee8cafa897..a6b52da8a2 100644
--- a/Marlin/src/pins/ramps/pins_AZTEEG_X3.h
+++ b/Marlin/src/pins/ramps/pins_AZTEEG_X3.h
@@ -51,7 +51,7 @@
 #undef STAT_LED_RED_PIN
 #undef STAT_LED_BLUE_PIN
 
-#if ANY(VIKI2, miniVIKI)
+#if EITHER(VIKI2, miniVIKI)
 
   #undef DOGLCD_A0
   #undef DOGLCD_CS
diff --git a/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h b/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h
index e3baea76e4..2159bb87b9 100644
--- a/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h
+++ b/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h
@@ -142,7 +142,7 @@
 #undef BEEPER_PIN
 #define BEEPER_PIN                            33
 
-#if ANY(VIKI2, miniVIKI)
+#if EITHER(VIKI2, miniVIKI)
   #undef SD_DETECT_PIN
   #define SD_DETECT_PIN                       49  // For easy adapter board
   #undef BEEPER_PIN
@@ -169,7 +169,7 @@
 #undef SPINDLE_DIR_PIN
 
 #if HAS_CUTTER                                    // EXP2 header
-  #if ANY(VIKI2, miniVIKI)
+  #if EITHER(VIKI2, miniVIKI)
     #define BTN_EN2                           31  // Pin 7 needed for Spindle PWM
   #endif
   #define SPINDLE_LASER_PWM_PIN                7  // Hardware PWM
diff --git a/Marlin/src/pins/ramps/pins_MKS_GEN_13.h b/Marlin/src/pins/ramps/pins_MKS_GEN_13.h
index 5f373f99d7..f000b5db07 100644
--- a/Marlin/src/pins/ramps/pins_MKS_GEN_13.h
+++ b/Marlin/src/pins/ramps/pins_MKS_GEN_13.h
@@ -60,7 +60,7 @@
 //
 // LCD / Controller
 //
-#if ANY(VIKI2, miniVIKI)
+#if EITHER(VIKI2, miniVIKI)
   /**
    * VIKI2 Has two groups of wires with...
    *
diff --git a/Marlin/src/pins/ramps/pins_RAMPS.h b/Marlin/src/pins/ramps/pins_RAMPS.h
index 4ab7f40073..991b9334b6 100644
--- a/Marlin/src/pins/ramps/pins_RAMPS.h
+++ b/Marlin/src/pins/ramps/pins_RAMPS.h
@@ -698,7 +698,7 @@
       #define LCD_SDSS                      SDSS
       #define SD_DETECT_PIN          EXP2_04_PIN
 
-    #elif ANY(VIKI2, miniVIKI)
+    #elif EITHER(VIKI2, miniVIKI)
 
       #define DOGLCD_CS              AUX4_05_PIN
       #define DOGLCD_A0              AUX2_07_PIN
diff --git a/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h
index 994a54297f..b685ff0094 100644
--- a/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h
+++ b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h
@@ -128,7 +128,7 @@
 
   // LCD Display input pins
   #if IS_NEWPANEL
-    #if ANY(VIKI2, miniVIKI)
+    #if EITHER(VIKI2, miniVIKI)
       #undef DOGLCD_A0
       #define DOGLCD_A0                       23
     #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
diff --git a/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h b/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h
index 37060ab945..146c519ff9 100644
--- a/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h
+++ b/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h
@@ -163,7 +163,7 @@
 //
 // LCD / Controller
 //
-#if ANY(BOARD_REV_1_0, BOARD_REV_1_1_TO_1_3)
+#if EITHER(BOARD_REV_1_0, BOARD_REV_1_1_TO_1_3)
 
   #define LCD_PINS_RS                         24
   #define LCD_PINS_ENABLE                     22
diff --git a/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h b/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h
index 980a957a50..4cb0f60328 100644
--- a/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h
+++ b/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h
@@ -217,7 +217,7 @@
 
   #endif
 
-  #if ANY(VIKI2, miniVIKI)
+  #if EITHER(VIKI2, miniVIKI)
     #define DOGLCD_A0                EXP1_04_PIN
     #define KILL_PIN                          51
     #define STAT_LED_BLUE_PIN        EXP1_08_PIN
diff --git a/Marlin/src/pins/samd/pins_BRICOLEMON_LITE_V1_0.h b/Marlin/src/pins/samd/pins_BRICOLEMON_LITE_V1_0.h
index 382c607d23..264b2e80c6 100644
--- a/Marlin/src/pins/samd/pins_BRICOLEMON_LITE_V1_0.h
+++ b/Marlin/src/pins/samd/pins_BRICOLEMON_LITE_V1_0.h
@@ -373,7 +373,7 @@
       //#define LCD_SDSS                    SDSS
       //#define SD_DETECT_PIN        EXP2_01_PIN
 
-    #elif ANY(VIKI2, miniVIKI)
+    #elif EITHER(VIKI2, miniVIKI)
 
       // TO TEST
       //#define DOGLCD_CS                     45
diff --git a/Marlin/src/pins/samd/pins_BRICOLEMON_V1_0.h b/Marlin/src/pins/samd/pins_BRICOLEMON_V1_0.h
index 0f4bb1d0b5..e90be4eda1 100644
--- a/Marlin/src/pins/samd/pins_BRICOLEMON_V1_0.h
+++ b/Marlin/src/pins/samd/pins_BRICOLEMON_V1_0.h
@@ -424,7 +424,7 @@
       //#define LCD_SDSS                    SDSS
       //#define SD_DETECT_PIN        EXP2_01_PIN
 
-    #elif ANY(VIKI2, miniVIKI)
+    #elif EITHER(VIKI2, miniVIKI)
 
       // TO TEST
       //#define DOGLCD_CS                     45
diff --git a/Marlin/src/pins/samd/pins_RAMPS_144.h b/Marlin/src/pins/samd/pins_RAMPS_144.h
index 406162c089..2c42506a5f 100644
--- a/Marlin/src/pins/samd/pins_RAMPS_144.h
+++ b/Marlin/src/pins/samd/pins_RAMPS_144.h
@@ -408,7 +408,7 @@
       //#define LCD_SDSS                    SDSS
       //#define SD_DETECT_PIN                 49
 
-    #elif ANY(VIKI2, miniVIKI)
+    #elif EITHER(VIKI2, miniVIKI)
 
       // TO TEST
       //#define DOGLCD_CS                     45
diff --git a/Marlin/src/pins/stm32f1/pins_BEAST.h b/Marlin/src/pins/stm32f1/pins_BEAST.h
index d494b29c14..4dafe2f273 100644
--- a/Marlin/src/pins/stm32f1/pins_BEAST.h
+++ b/Marlin/src/pins/stm32f1/pins_BEAST.h
@@ -131,7 +131,7 @@
       #error "LCD_I2C_PANELOLU2 is not supported."
     #elif ENABLED(LCD_I2C_VIKI)
       #error "LCD_I2C_VIKI is not supported."
-    #elif ANY(VIKI2, miniVIKI)
+    #elif EITHER(VIKI2, miniVIKI)
       #error "VIKI2 / miniVIKI is not supported."
     #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
       #error "ELB_FULL_GRAPHIC_CONTROLLER is not supported."
diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D.h b/Marlin/src/pins/stm32f1/pins_CHITU3D.h
index 1f56e59a23..3b66096a27 100644
--- a/Marlin/src/pins/stm32f1/pins_CHITU3D.h
+++ b/Marlin/src/pins/stm32f1/pins_CHITU3D.h
@@ -171,7 +171,7 @@
       #define LCD_SDSS                      PD5   // 53
       #define SD_DETECT_PIN                 PD1   // 49
 
-    #elif ANY(VIKI2, miniVIKI)
+    #elif EITHER(VIKI2, miniVIKI)
 
       #define BEEPER_PIN                    PC1   // 33
 
diff --git a/Marlin/src/pins/stm32f1/pins_STM32F1R.h b/Marlin/src/pins/stm32f1/pins_STM32F1R.h
index c08b707d7e..634cadc1aa 100644
--- a/Marlin/src/pins/stm32f1/pins_STM32F1R.h
+++ b/Marlin/src/pins/stm32f1/pins_STM32F1R.h
@@ -120,7 +120,7 @@
       #error "LCD_I2C_PANELOLU2 is not supported."
     #elif ENABLED(LCD_I2C_VIKI)
       #error "LCD_I2C_VIKI is not supported."
-    #elif ANY(VIKI2, miniVIKI)
+    #elif EITHER(VIKI2, miniVIKI)
       #error "VIKI2 / miniVIKI is not supported."
     #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
       #error "ELB_FULL_GRAPHIC_CONTROLLER is not supported."
diff --git a/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h b/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h
index e189fc3f97..eee7dbf316 100644
--- a/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h
+++ b/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h
@@ -144,7 +144,7 @@
       #error "LCD_I2C_PANELOLU2 is not supported."
     #elif ENABLED(LCD_I2C_VIKI)
       #error "LCD_I2C_VIKI is not supported."
-    #elif ANY(VIKI2, miniVIKI)
+    #elif EITHER(VIKI2, miniVIKI)
       #error "VIKI2 / miniVIKI is not supported."
     #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
       #error "ELB_FULL_GRAPHIC_CONTROLLER is not supported."
diff --git a/Marlin/src/pins/stm32f4/pins_MKS_MONSTER8.h b/Marlin/src/pins/stm32f4/pins_MKS_MONSTER8.h
index 736c79b6e0..4c05f41dc6 100644
--- a/Marlin/src/pins/stm32f4/pins_MKS_MONSTER8.h
+++ b/Marlin/src/pins/stm32f4/pins_MKS_MONSTER8.h
@@ -283,7 +283,7 @@
   #endif
 #endif
 
-#if ANY(TFT_COLOR_UI, TFT_CLASSIC_UI)
+#if EITHER(TFT_COLOR_UI, TFT_CLASSIC_UI)
   #define TFT_CS_PIN                 EXP1_04_PIN
   #define TFT_SCK_PIN                EXP2_09_PIN
   #define TFT_MISO_PIN               EXP2_10_PIN
diff --git a/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h b/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h
index 82d9cec894..ddf0d53ea6 100644
--- a/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h
+++ b/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h
@@ -130,7 +130,7 @@
   #define LCD_PINS_D6                          5  // D5       JP11-6
   #define LCD_PINS_D7                          4  // D4       JP11-5
 
-  #if ANY(VIKI2, miniVIKI)
+  #if EITHER(VIKI2, miniVIKI)
     #define BEEPER_PIN                         8  // E0       JP11-10
 
     #define DOGLCD_A0                         40  // F2       JP2-2
diff --git a/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h
index 1ac953c89f..1867398087 100644
--- a/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h
+++ b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h
@@ -207,7 +207,7 @@
   #define LCD_PINS_D6                          5  // D5       JP11-6
   #define LCD_PINS_D7                          4  // D4       JP11-5
 
-  #if ANY(VIKI2, miniVIKI)
+  #if EITHER(VIKI2, miniVIKI)
 
     #define BEEPER_PIN                         8  // E0       JP11-10
     #define DOGLCD_A0                         40  // F2       JP2-2