diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index 661a213b4b..b5b33692a0 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -333,18 +333,19 @@ #define BOARD_CCROBOT_MEEB_3DP 4035 // ccrobot-online.com MEEB_3DP (STM32F103RC) #define BOARD_CHITU3D_V5 4036 // Chitu3D TronXY X5SA V5 Board #define BOARD_CHITU3D_V6 4037 // Chitu3D TronXY X5SA V6 Board -#define BOARD_CREALITY_V4 4038 // Creality v4.x (STM32F103RE) -#define BOARD_CREALITY_V427 4039 // Creality v4.2.7 (STM32F103RE) -#define BOARD_CREALITY_V4210 4040 // Creality v4.2.10 (STM32F103RE) as found in the CR-30 -#define BOARD_CREALITY_V431 4041 // Creality v4.3.1 (STM32F103RE) -#define BOARD_CREALITY_V452 4042 // Creality v4.5.2 (STM32F103RE) -#define BOARD_CREALITY_V453 4043 // Creality v4.5.3 (STM32F103RE) -#define BOARD_TRIGORILLA_PRO 4044 // Trigorilla Pro (STM32F103ZET6) -#define BOARD_FLY_MINI 4045 // FLYmaker FLY MINI (STM32F103RCT6) -#define BOARD_FLSUN_HISPEED 4046 // FLSUN HiSpeedV1 (STM32F103VET6) -#define BOARD_BEAST 4047 // STM32F103RET6 Libmaple-based controller -#define BOARD_MINGDA_MPX_ARM_MINI 4048 // STM32F103ZET6 Mingda MD-16 -#define BOARD_GTM32_PRO_VD 4049 // STM32F103VET6 controller +#define BOARD_CHITU3D_V9 4038 // Chitu3D TronXY X5SA V9 Board +#define BOARD_CREALITY_V4 4039 // Creality v4.x (STM32F103RE) +#define BOARD_CREALITY_V427 4040 // Creality v4.2.7 (STM32F103RE) +#define BOARD_CREALITY_V4210 4041 // Creality v4.2.10 (STM32F103RE) as found in the CR-30 +#define BOARD_CREALITY_V431 4042 // Creality v4.3.1 (STM32F103RE) +#define BOARD_CREALITY_V452 4043 // Creality v4.5.2 (STM32F103RE) +#define BOARD_CREALITY_V453 4044 // Creality v4.5.3 (STM32F103RE) +#define BOARD_TRIGORILLA_PRO 4045 // Trigorilla Pro (STM32F103ZET6) +#define BOARD_FLY_MINI 4046 // FLYmaker FLY MINI (STM32F103RCT6) +#define BOARD_FLSUN_HISPEED 4047 // FLSUN HiSpeedV1 (STM32F103VET6) +#define BOARD_BEAST 4048 // STM32F103RET6 Libmaple-based controller +#define BOARD_MINGDA_MPX_ARM_MINI 4049 // STM32F103ZET6 Mingda MD-16 +#define BOARD_GTM32_PRO_VD 4050 // STM32F103VET6 controller // // ARM Cortex-M4F diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index b5a81c6097..4c773d1e76 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -537,6 +537,8 @@ #include "stm32f1/pins_CHITU3D_V5.h" // STM32F1 env:chitu_f103 env:chitu_f103_maple env:chitu_v5_gpio_init env:chitu_v5_gpio_init_maple #elif MB(CHITU3D_V6) #include "stm32f1/pins_CHITU3D_V6.h" // STM32F1 env:chitu_f103 env:chitu_f103_maple +#elif MB(CHITU3D_V9) + #include "stm32f1/pins_CHITU3D_V9.h" // STM32F1 env:chitu_f103 env:chitu_f103_maple #elif MB(CREALITY_V4) #include "stm32f1/pins_CREALITY_V4.h" // STM32F1 env:STM32F103RET6_creality env:STM32F103RET6_creality_maple #elif MB(CREALITY_V4210) diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D.h b/Marlin/src/pins/stm32f1/pins_CHITU3D.h index c2025ba8c0..2d33fb9f2c 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D.h @@ -81,12 +81,7 @@ // Heaters / Fans // #define HEATER_0_PIN PD12 // HOT-END -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 - #define HEATER_BED_PIN PG11 // HOT-BED -#define HEATER_BED2_PIN -1 // BED2 -#define HEATER_BED3_PIN -1 // BED3 #ifndef FAN_PIN #define FAN_PIN PG14 // MAIN BOARD FAN @@ -97,8 +92,8 @@ // // Temperature Sensors // -#define TEMP_BED_PIN PA0 // Analog Input #define TEMP_0_PIN PA1 // Analog Input +#define TEMP_BED_PIN PA0 // Analog Input // // LCD Pins diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h index 88dd28a401..afe58df803 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h @@ -21,148 +21,8 @@ */ #pragma once -#include "env_validate.h" +#define BOARD_INFO_NAME "Chitu3D V5" -/** - * 2017 Victor Perez Marlin for stm32f1 test - */ +#define Z_STOP_PIN PG9 -#define BOARD_INFO_NAME "Chitu3D V5" -#define DEFAULT_MACHINE_NAME "STM32F103ZET6" - -#define BOARD_NO_NATIVE_USB - -#define DISABLE_JTAG - -// -// EEPROM -// -#define FLASH_EEPROM_EMULATION -#if ENABLED(FLASH_EEPROM_EMULATION) - // SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h) - #define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE) - #define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB) - #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE -#else - #define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM -#endif - -// -// Limit Switches -// -#define X_STOP_PIN PG10 -#define Y_STOP_PIN PA12 -#define Z_STOP_PIN PA14 - -// -// Steppers -// -#define X_ENABLE_PIN PC13 -#define X_STEP_PIN PE5 -#define X_DIR_PIN PE6 - -#define Y_ENABLE_PIN PE4 -#define Y_STEP_PIN PE2 -#define Y_DIR_PIN PE3 - -#define Z_ENABLE_PIN PE1 -#define Z_STEP_PIN PB9 -#define Z_DIR_PIN PE0 - -#define E0_ENABLE_PIN PB8 -#define E0_STEP_PIN PB4 -#define E0_DIR_PIN PB5 - -#define E1_ENABLE_PIN PG8 -#define E1_STEP_PIN PC7 -#define E1_DIR_PIN PC6 - -// -// Temperature Sensors -// -#define TEMP_0_PIN PA1 // TH1 -#define TEMP_BED_PIN PA0 // TB1 - -// -// Heaters -// -#define HEATER_0_PIN PG12 // HEATER1 -#define HEATER_BED_PIN PG11 // HOT BED - -// -// Fans -// -#define CONTROLLER_FAN_PIN PD6 // BOARD FAN -#define FAN_PIN PG13 // FAN -#define FAN2_PIN PG14 - -// -// Misc -// -#define BEEPER_PIN PB0 -//#define LED_PIN -1 -//#define POWER_LOSS_PIN -1 -#define FIL_RUNOUT_PIN PA15 - -// SPI Flash -#define HAS_SPI_FLASH 1 -#if HAS_SPI_FLASH - #define SPI_FLASH_SIZE 0x200000 // 2MB -#endif - -// SPI 2 -#define W25QXX_CS_PIN PB12 -#define W25QXX_MOSI_PIN PB15 -#define W25QXX_MISO_PIN PB14 -#define W25QXX_SCK_PIN PB13 - -// -// TFT with FSMC interface -// -#if HAS_FSMC_TFT - #define TOUCH_CS_PIN PB7 // SPI1_NSS - #define TOUCH_SCK_PIN PA5 // SPI1_SCK - #define TOUCH_MISO_PIN PA6 // SPI1_MISO - #define TOUCH_MOSI_PIN PA7 // SPI1_MOSI - - #define TFT_RESET_PIN PF11 - #define TFT_BACKLIGHT_PIN PD13 - - #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT - #define FSMC_CS_PIN PD7 - #define FSMC_RS_PIN PD11 - #define FSMC_DMA_DEV DMA2 - #define FSMC_DMA_CHANNEL DMA_CH5 - - #define TFT_CS_PIN FSMC_CS_PIN - #define TFT_RS_PIN FSMC_RS_PIN -#endif - -#if ENABLED(TFT_LVGL_UI) - // LVGL - #define HAS_SPI_FLASH_FONT 1 - #define HAS_GCODE_PREVIEW 1 - #define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0 - #define HAS_LANG_SELECT_SCREEN 1 - #define HAS_BAK_VIEW_IN_FLASH 0 - #define HAS_LOGO_IN_FLASH 0 -#elif ENABLED(TFT_COLOR_UI) - // Color UI - #define TFT_BUFFER_SIZE 14400 -#endif - -// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available -// Needs to use SPI2 -#define SPI_DEVICE 2 -#define SD_SCK_PIN PB13 -#define SD_MISO_PIN PB14 -#define SD_MOSI_PIN PB15 -#define SD_SS_PIN PB12 - -// -// SD Card -// -#define SDIO_SUPPORT -#define SD_DETECT_PIN -1 // PF0, but it isn't connected -#define SDIO_CLOCK 4500000 -#define SDIO_READ_RETRIES 16 +#include "pins_CHITU3D_common.h" diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h index 51bd7294a9..b76ef52c42 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h @@ -21,160 +21,14 @@ */ #pragma once -#include "env_validate.h" - -/** - * 2017 Victor Perez Marlin for stm32f1 test - */ - -#define BOARD_INFO_NAME "Chitu3D" -#define DEFAULT_MACHINE_NAME "STM32F103ZET6" - -#define BOARD_NO_NATIVE_USB - -#define DISABLE_JTAG - -// -// EEPROM -// - -#if NO_EEPROM_SELECTED - #define FLASH_EEPROM_EMULATION -#endif - -#if ENABLED(FLASH_EEPROM_EMULATION) - // SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h) - #define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE) - #define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB) - #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE -#else - #define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM -#endif - -// -// Limit Switches -// -#define X_STOP_PIN PG10 -#define Y_STOP_PIN PA12 -#define Z_STOP_PIN PG9 - -// -// Steppers -// -#define X_ENABLE_PIN PC13 -#define X_STEP_PIN PE5 -#define X_DIR_PIN PE6 - -#define Y_ENABLE_PIN PE4 -#define Y_STEP_PIN PE2 -#define Y_DIR_PIN PE3 - -#define Z_ENABLE_PIN PE1 -#define Z_STEP_PIN PB9 -#define Z_DIR_PIN PE0 +#define BOARD_INFO_NAME "Chitu3D V6" #define Z2_ENABLE_PIN PF3 #define Z2_STEP_PIN PF5 #define Z2_DIR_PIN PF1 -#define E0_ENABLE_PIN PB8 -#define E0_STEP_PIN PB4 -#define E0_DIR_PIN PB5 - -#define E1_ENABLE_PIN PG8 -#define E1_STEP_PIN PC7 -#define E1_DIR_PIN PC6 - -// -// Temperature Sensors -// -#define TEMP_0_PIN PA1 // TH1 -#define TEMP_BED_PIN PA0 // TB1 - -// -// Heaters -// -#define HEATER_0_PIN PG12 // HEATER1 -#define HEATER_BED_PIN PG11 // HOT BED -//#define HEATER_BED_INVERTING true - -// -// Fans -// -#define CONTROLLER_FAN_PIN PD6 // BOARD FAN -#define FAN_PIN PG13 // FAN -#define FAN2_PIN PG14 - -// -// Misc -// -#define BEEPER_PIN PB0 -//#define LED_PIN PD3 -//#define POWER_LOSS_PIN PG2 // PG4 PW_DET - -#ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN PA15 // MT_DET -#endif #ifndef FIL_RUNOUT2_PIN #define FIL_RUNOUT2_PIN PF13 #endif -// SPI Flash -#define HAS_SPI_FLASH 1 -#if HAS_SPI_FLASH - #define SPI_FLASH_SIZE 0x200000 // 2MB -#endif - -// SPI 2 -#define W25QXX_CS_PIN PB12 -#define W25QXX_MOSI_PIN PB15 -#define W25QXX_MISO_PIN PB14 -#define W25QXX_SCK_PIN PB13 - -// -// TFT with FSMC interface -// -#if HAS_FSMC_TFT - #define TOUCH_CS_PIN PB7 // SPI1_NSS - #define TOUCH_SCK_PIN PA5 // SPI1_SCK - #define TOUCH_MISO_PIN PA6 // SPI1_MISO - #define TOUCH_MOSI_PIN PA7 // SPI1_MOSI - - #define TFT_RESET_PIN PF11 - #define TFT_BACKLIGHT_PIN PD13 - - #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT - #define FSMC_CS_PIN PD7 - #define FSMC_RS_PIN PD11 - #define FSMC_DMA_DEV DMA2 - #define FSMC_DMA_CHANNEL DMA_CH5 -#endif - -#if ENABLED(TFT_LVGL_UI) - // LVGL - #define HAS_SPI_FLASH_FONT 1 - #define HAS_GCODE_PREVIEW 1 - #define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0 - #define HAS_LANG_SELECT_SCREEN 1 - #define HAS_BAK_VIEW_IN_FLASH 0 - #define HAS_LOGO_IN_FLASH 0 -#elif ENABLED(TFT_COLOR_UI) - // Color UI - #define TFT_BUFFER_SIZE 14400 -#endif - -// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available -// so SPI2 is required. -#define SPI_DEVICE 2 -#define SD_SCK_PIN PB13 -#define SD_MISO_PIN PB14 -#define SD_MOSI_PIN PB15 -#define SD_SS_PIN PB12 - -// -// SD Card -// -#define SDIO_SUPPORT -#define SD_DETECT_PIN -1 // PF0, but it isn't connected -#define SDIO_CLOCK 4500000 -#define SDIO_READ_RETRIES 16 +#include "pins_CHITU3D_common.h" diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_V9.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_V9.h new file mode 100755 index 0000000000..eb7f91deab --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_V9.h @@ -0,0 +1,36 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#define BOARD_INFO_NAME "Chitu3D V9" + +#define Z_STOP_PIN PA14 + +#define Z2_ENABLE_PIN PF3 +#define Z2_STEP_PIN PF5 +#define Z2_DIR_PIN PF1 + +#ifndef FIL_RUNOUT2_PIN + #define FIL_RUNOUT2_PIN PF13 +#endif + +#include "pins_CHITU3D_common.h" diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_common.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_common.h new file mode 100644 index 0000000000..b638589388 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_common.h @@ -0,0 +1,177 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include "env_validate.h" + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "Chitu3D" +#endif +#ifndef DEFAULT_MACHINE_NAME + #define DEFAULT_MACHINE_NAME "STM32F103ZET6" +#endif + +#define BOARD_NO_NATIVE_USB +#define DISABLE_JTAG + +// +// EEPROM +// + +#if NO_EEPROM_SELECTED + #define FLASH_EEPROM_EMULATION +#endif + +#if ENABLED(FLASH_EEPROM_EMULATION) + // SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h) + #define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE) + #define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE +#else + #define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM +#endif + +// +// Limit Switches +// +#define X_STOP_PIN PG10 +#define Y_STOP_PIN PA12 +#ifndef Z_STOP_PIN + #define Z_STOP_PIN PG9 +#endif + +// +// Steppers +// +#define X_ENABLE_PIN PC13 +#define X_STEP_PIN PE5 +#define X_DIR_PIN PE6 + +#define Y_ENABLE_PIN PE4 +#define Y_STEP_PIN PE2 +#define Y_DIR_PIN PE3 + +#define Z_ENABLE_PIN PE1 +#define Z_STEP_PIN PB9 +#define Z_DIR_PIN PE0 + +#define E0_ENABLE_PIN PB8 +#define E0_STEP_PIN PB4 +#define E0_DIR_PIN PB5 + +#define E1_ENABLE_PIN PG8 +#define E1_STEP_PIN PC7 +#define E1_DIR_PIN PC6 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PA1 // TH1 Analog Input +#define TEMP_BED_PIN PA0 // TB1 Analog Input + +// +// Heaters +// +#define HEATER_0_PIN PG12 // HEATER1 +#define HEATER_BED_PIN PG11 // HOT BED +//#define HEATER_BED_INVERTING true + +// +// Fans +// +#define CONTROLLER_FAN_PIN PD6 // BOARD FAN +#define FAN_PIN PG13 // FAN +#define FAN2_PIN PG14 + +// +// Misc +// +#define BEEPER_PIN PB0 +//#define LED_PIN PD3 +//#define POWER_LOSS_PIN PG2 // PG4 PW_DET + +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN PA15 // MT_DET +#endif + +// SPI Flash +#define HAS_SPI_FLASH 1 +#if HAS_SPI_FLASH + #define SPI_FLASH_SIZE 0x200000 // 2MB +#endif + +// SPI 2 +#define W25QXX_CS_PIN PB12 +#define W25QXX_MOSI_PIN PB15 +#define W25QXX_MISO_PIN PB14 +#define W25QXX_SCK_PIN PB13 + +// +// TFT with FSMC interface +// +#if HAS_FSMC_TFT + #define TOUCH_CS_PIN PB7 // SPI1_NSS + #define TOUCH_SCK_PIN PA5 // SPI1_SCK + #define TOUCH_MISO_PIN PA6 // SPI1_MISO + #define TOUCH_MOSI_PIN PA7 // SPI1_MOSI + + #define TFT_RESET_PIN PF11 + #define TFT_BACKLIGHT_PIN PD13 + + #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT + #define FSMC_CS_PIN PD7 + #define FSMC_RS_PIN PD11 + #define FSMC_DMA_DEV DMA2 + #define FSMC_DMA_CHANNEL DMA_CH5 + + #define TFT_CS_PIN FSMC_CS_PIN + #define TFT_RS_PIN FSMC_RS_PIN +#endif + +#if ENABLED(TFT_LVGL_UI) + // LVGL + #define HAS_SPI_FLASH_FONT 1 + #define HAS_GCODE_PREVIEW 1 + #define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0 + #define HAS_LANG_SELECT_SCREEN 1 + #define HAS_BAK_VIEW_IN_FLASH 0 + #define HAS_LOGO_IN_FLASH 0 +#elif ENABLED(TFT_COLOR_UI) + // Color UI + #define TFT_BUFFER_SIZE 14400 +#endif + +// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available +// so SPI2 is required. +#define SPI_DEVICE 2 +#define SD_SCK_PIN PB13 +#define SD_MISO_PIN PB14 +#define SD_MOSI_PIN PB15 +#define SD_SS_PIN PB12 + +// +// SD Card +// +#define SDIO_SUPPORT +#define SD_DETECT_PIN -1 // PF0, but it isn't connected +#define SDIO_CLOCK 4500000 +#define SDIO_READ_RETRIES 16