zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

🎨 Standardize G-code reporting

Browse source
This commit is contained in:
Scott Lahteine 2021-09-07 18:06:10 -05:00 committed by Scott Lahteine
parent a596faf4e5
commit 6d96c221bd
48 changed files with 1360 additions and 1170 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
Marlin/src/HAL/AVR/pinsDebug.h
View file

@ -235,7 +235,7 @@ static void print_is_also_tied() { SERIAL_ECHOPGM(" is also tied to this pin");
inline void com_print(const uint8_t N, const uint8_t Z) {
const uint8_t *TCCRA = (uint8_t*)TCCR_A(N);
SERIAL_ECHOPAIR(" COM", AS_CHAR('0' + N));
SERIAL_ECHOPAIR(" COM", AS_DIGIT(N));
SERIAL_CHAR(Z);
SERIAL_ECHOPAIR(": ", int((*TCCRA >> (6 - Z * 2)) & 0x03));
}
@ -247,7 +247,7 @@ void timer_prefix(uint8_t T, char L, uint8_t N) { // T - timer L - pwm N -
uint8_t WGM = (((*TCCRB & _BV(WGM_2)) >> 1) | (*TCCRA & (_BV(WGM_0) | _BV(WGM_1))));
if (N == 4) WGM |= ((*TCCRB & _BV(WGM_3)) >> 1);
SERIAL_ECHOPAIR(" TIMER", AS_CHAR(T + '0'));
SERIAL_ECHOPAIR(" TIMER", AS_DIGIT(T));
SERIAL_CHAR(L);
SERIAL_ECHO_SP(3);
@ -262,11 +262,11 @@ void timer_prefix(uint8_t T, char L, uint8_t N) { // T - timer L - pwm N -
SERIAL_ECHOPAIR(" WGM: ", WGM);
com_print(T,L);
SERIAL_ECHOPAIR(" CS: ", (*TCCRB & (_BV(CS_0) | _BV(CS_1) | _BV(CS_2)) ));
SERIAL_ECHOPAIR(" TCCR", AS_CHAR(T + '0'), "A: ", *TCCRA);
SERIAL_ECHOPAIR(" TCCR", AS_CHAR(T + '0'), "B: ", *TCCRB);
SERIAL_ECHOPAIR(" TCCR", AS_DIGIT(T), "A: ", *TCCRA);
SERIAL_ECHOPAIR(" TCCR", AS_DIGIT(T), "B: ", *TCCRB);
const uint8_t *TMSK = (uint8_t*)TIMSK(T);
SERIAL_ECHOPAIR(" TIMSK", AS_CHAR(T + '0'), ": ", *TMSK);
SERIAL_ECHOPAIR(" TIMSK", AS_DIGIT(T), ": ", *TMSK);
const uint8_t OCIE = L - 'A' + 1;
if (N == 3) { if (WGM == 0 || WGM == 2 || WGM == 4 || WGM == 6) err_is_counter(); }

47
Marlin/src/core/language.h
View file

@ -158,9 +158,7 @@
#define STR_OFF "OFF"
#define STR_ENDSTOP_HIT "TRIGGERED"
#define STR_ENDSTOP_OPEN "open"
#define STR_HOTEND_OFFSET "Hotend offsets:"
#define STR_DUPLICATION_MODE "Duplication mode: "
#define STR_SOFT_ENDSTOPS "Soft endstops: "
#define STR_SOFT_MIN " Min: "
#define STR_SOFT_MAX " Max: "
@ -262,6 +260,49 @@
#define STR_REMINDER_SAVE_SETTINGS "Remember to save!"
#define STR_PASSWORD_SET "Password is "
// Settings Report Strings
#define STR_Z_AUTO_ALIGN "Z Auto-Align"
#define STR_BACKLASH_COMPENSATION "Backlash compensation"
#define STR_DELTA_SETTINGS "Delta settings (L<diagonal-rod> R<radius> H<height> S<segments-per-sec> XYZ<tower-angle-trim> ABC<rod-trim>)"
#define STR_SCARA_SETTINGS "SCARA settings"
#define STR_SCARA_S "S<seg-per-sec>"
#define STR_SCARA_P_T_Z "P<theta-psi-offset> T<theta-offset> Z<home-offset>"
#define STR_ENDSTOP_ADJUSTMENT "Endstop adjustment"
#define STR_SKEW_FACTOR "Skew Factor"
#define STR_FILAMENT_SETTINGS "Filament settings"
#define STR_MAX_ACCELERATION "Max Acceleration (units/s2)"
#define STR_MAX_FEEDRATES "Max feedrates (units/s)"
#define STR_ACCELERATION_P_R_T "Acceleration (units/s2) (P<print-accel> R<retract-accel> T<travel-accel>)"
#define STR_TOOL_CHANGING "Tool-changing"
#define STR_HOTEND_OFFSETS "Hotend offsets"
#define STR_SERVO_ANGLES "Servo Angles"
#define STR_HOTEND_PID "Hotend PID"
#define STR_BED_PID "Bed PID"
#define STR_CHAMBER_PID "Chamber PID"
#define STR_STEPS_PER_UNIT "Steps per unit"
#define STR_LINEAR_ADVANCE "Linear Advance"
#define STR_CONTROLLER_FAN "Controller Fan"
#define STR_STEPPER_MOTOR_CURRENTS "Stepper motor currents"
#define STR_RETRACT_S_F_Z "Retract (S<length> F<feedrate> Z<lift>)"
#define STR_RECOVER_S_F "Recover (S<length> F<feedrate>)"
#define STR_AUTO_RETRACT_S "Auto-Retract (S<enable>)"
#define STR_FILAMENT_LOAD_UNLOAD "Filament load/unload"
#define STR_POWER_LOSS_RECOVERY "Power-loss recovery"
#define STR_FILAMENT_RUNOUT_SENSOR "Filament runout sensor"
#define STR_DRIVER_STEPPING_MODE "Driver stepping mode"
#define STR_STEPPER_DRIVER_CURRENT "Stepper driver current"
#define STR_HYBRID_THRESHOLD "Hybrid Threshold"
#define STR_STALLGUARD_THRESHOLD "StallGuard threshold"
#define STR_HOME_OFFSET "Home offset"
#define STR_SOFT_ENDSTOPS "Soft endstops"
#define STR_MATERIAL_HEATUP "Material heatup parameters"
#define STR_LCD_CONTRAST "LCD Contrast"
#define STR_LCD_BRIGHTNESS "LCD Brightness"
#define STR_UI_LANGUAGE "UI Language"
#define STR_Z_PROBE_OFFSET "Z-Probe Offset"
#define STR_TEMPERATURE_UNITS "Temperature Units"
#define STR_USER_THERMISTORS "User thermistors"
//
// Endstop Names used by Endstops::report_states
//
@ -290,7 +331,7 @@
#define STR_Z_PROBE "z_probe"
#define STR_PROBE_EN "probe_en"
#define STR_FILAMENT_RUNOUT_SENSOR "filament"
#define STR_FILAMENT "filament"
// General axis names
#define STR_X "X"

2
Marlin/src/core/types.h
View file

@ -55,6 +55,8 @@ struct IF<true, L, R> { typedef L type; };
#define LOGICAL_AXIS_ELEM(O) LOGICAL_AXIS_LIST(O.e, O.x, O.y, O.z, O.i, O.j, O.k)
#define LOGICAL_AXIS_DECL(T,V) LOGICAL_AXIS_LIST(T e=V, T x=V, T y=V, T z=V, T i=V, T j=V, T k=V)
#define LOGICAL_AXES_STRING LOGICAL_AXIS_GANG("E", "X", "Y", "Z", AXIS4_STR, AXIS5_STR, AXIS6_STR)
#if HAS_EXTRUDERS
#define LIST_ITEM_E(N) , N
#define CODE_ITEM_E(N) ; N

11
Marlin/src/feature/fwretract.cpp
View file

@ -36,7 +36,7 @@ FWRetract fwretract; // Single instance - this calls the constructor
#include "../module/planner.h"
#include "../module/stepper.h"
#include "../gcode/parser.h"
#include "../gcode/gcode.h"
#if ENABLED(RETRACT_SYNC_MIXING)
#include "mixing.h"
@ -214,8 +214,7 @@ void FWRetract::M207() {
if (parser.seenval('W')) settings.swap_retract_length = parser.value_axis_units(E_AXIS);
}
void FWRetract::M207_report(const bool forReplay/*=false*/) {
if (!forReplay) { SERIAL_ECHO_MSG("; Retract: S<length> F<units/m> Z<lift>"); SERIAL_ECHO_START(); }
void FWRetract::M207_report() {
SERIAL_ECHOLNPAIR_P(
PSTR(" M207 S"), LINEAR_UNIT(settings.retract_length)
, PSTR(" W"), LINEAR_UNIT(settings.swap_retract_length)
@ -240,8 +239,7 @@ void FWRetract::M208() {
if (parser.seen('W')) settings.swap_retract_recover_extra = parser.value_axis_units(E_AXIS);
}
void FWRetract::M208_report(const bool forReplay/*=false*/) {
if (!forReplay) { SERIAL_ECHO_MSG("; Recover: S<length> F<units/m>"); SERIAL_ECHO_START(); }
void FWRetract::M208_report() {
SERIAL_ECHOLNPAIR(
" M208 S", LINEAR_UNIT(settings.retract_recover_extra)
, " W", LINEAR_UNIT(settings.swap_retract_recover_extra)
@ -262,8 +260,7 @@ void FWRetract::M208_report(const bool forReplay/*=false*/) {
enable_autoretract(parser.value_bool());
}
void FWRetract::M209_report(const bool forReplay/*=false*/) {
if (!forReplay) { SERIAL_ECHO_MSG("; Auto-Retract: S=0 to disable, 1 to interpret E-only moves as retract/recover"); SERIAL_ECHO_START(); }
void FWRetract::M209_report() {
SERIAL_ECHOLNPAIR(" M209 S", AS_DIGIT(autoretract_enabled));
}

6
Marlin/src/feature/fwretract.h
View file

@ -76,13 +76,13 @@ public:
static void retract(const bool retracting OPTARG(HAS_MULTI_EXTRUDER, bool swapping = false));
static void M207_report();
static void M207();
static void M207_report(const bool forReplay=false);
static void M208_report();
static void M208();
static void M208_report(const bool forReplay=false);
#if ENABLED(FWRETRACT_AUTORETRACT)
static void M209_report();
static void M209();
static void M209_report(const bool forReplay=false);
#endif
};

14
Marlin/src/gcode/bedlevel/M420.cpp
View file

@ -242,4 +242,18 @@ void GcodeSuite::M420() {
report_current_position();
}
void GcodeSuite::M420_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(
TERN(MESH_BED_LEVELING, "Mesh Bed Leveling", TERN(AUTO_BED_LEVELING_UBL, "Unified Bed Leveling", "Auto Bed Leveling"))
));
SERIAL_ECHOPAIR_P(
PSTR(" M420 S"), planner.leveling_active
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
, SP_Z_STR, LINEAR_UNIT(planner.z_fade_height)
#endif
, " ; Leveling "
);
serialprintln_onoff(planner.leveling_active);
}
#endif // HAS_LEVELING

34
Marlin/src/gcode/calibrate/G34_M422.cpp
View file

@ -475,21 +475,13 @@ void GcodeSuite::G34() {
*/
void GcodeSuite::M422() {
if (!parser.seen_any()) return M422_report();
if (parser.seen('R')) {
z_stepper_align.reset_to_default();
return;
}
if (!parser.seen_any()) {
LOOP_L_N(i, NUM_Z_STEPPER_DRIVERS)
SERIAL_ECHOLNPAIR_P(PSTR("M422 S"), i + 1, SP_X_STR, z_stepper_align.xy[i].x, SP_Y_STR, z_stepper_align.xy[i].y);
#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
LOOP_L_N(i, NUM_Z_STEPPER_DRIVERS)
SERIAL_ECHOLNPAIR_P(PSTR("M422 W"), i + 1, SP_X_STR, z_stepper_align.stepper_xy[i].x, SP_Y_STR, z_stepper_align.stepper_xy[i].y);
#endif
return;
}
const bool is_probe_point = parser.seen('S');
if (TERN0(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS, is_probe_point && parser.seen('W'))) {
@ -545,4 +537,26 @@ void GcodeSuite::M422() {
pos_dest[position_index] = pos;
}
void GcodeSuite::M422_report(const bool forReplay/*=true*/) {
report_heading(forReplay, PSTR(STR_Z_AUTO_ALIGN));
LOOP_L_N(i, NUM_Z_STEPPER_DRIVERS) {
report_echo_start(forReplay);
SERIAL_ECHOLNPAIR_P(
PSTR(" M422 S"), i + 1,
SP_X_STR, z_stepper_align.xy[i].x,
SP_Y_STR, z_stepper_align.xy[i].y
);
}
#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
LOOP_L_N(i, NUM_Z_STEPPER_DRIVERS) {
report_echo_start(forReplay);
SERIAL_ECHOLNPAIR_P(
PSTR(" M422 W"), i + 1,
SP_X_STR, z_stepper_align.stepper_xy[i].x,
SP_Y_STR, z_stepper_align.stepper_xy[i].y
);
}
#endif
}
#endif // Z_STEPPER_AUTO_ALIGN

18
Marlin/src/gcode/calibrate/M425.cpp
View file

@ -113,4 +113,22 @@ void GcodeSuite::M425() {
}
}
void GcodeSuite::M425_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_BACKLASH_COMPENSATION));
SERIAL_ECHOLNPAIR_P(
PSTR(" M425 F"), backlash.get_correction()
#ifdef BACKLASH_SMOOTHING_MM
, PSTR(" S"), LINEAR_UNIT(backlash.smoothing_mm)
#endif
, LIST_N(DOUBLE(LINEAR_AXES),
SP_X_STR, LINEAR_UNIT(backlash.distance_mm.x),
SP_Y_STR, LINEAR_UNIT(backlash.distance_mm.y),
SP_Z_STR, LINEAR_UNIT(backlash.distance_mm.z),
SP_I_STR, LINEAR_UNIT(backlash.distance_mm.i),
SP_J_STR, LINEAR_UNIT(backlash.distance_mm.j),
SP_K_STR, LINEAR_UNIT(backlash.distance_mm.k)
)
);
}
#endif // BACKLASH_GCODE

36
Marlin/src/gcode/calibrate/M665.cpp
View file

@ -30,6 +30,7 @@
#if ENABLED(DELTA)
#include "../../module/delta.h"
/**
* M665: Set delta configurations
*
@ -45,6 +46,8 @@
* C = Gamma (Tower 3) diagonal rod trim
*/
void GcodeSuite::M665() {
if (!parser.seen_any()) return M665_report();
if (parser.seenval('H')) delta_height = parser.value_linear_units();
if (parser.seenval('L')) delta_diagonal_rod = parser.value_linear_units();
if (parser.seenval('R')) delta_radius = parser.value_linear_units();
@ -58,6 +61,22 @@
recalc_delta_settings();
}
void GcodeSuite::M665_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_DELTA_SETTINGS));
SERIAL_ECHOLNPAIR_P(
PSTR(" M665 L"), LINEAR_UNIT(delta_diagonal_rod)
, PSTR(" R"), LINEAR_UNIT(delta_radius)
, PSTR(" H"), LINEAR_UNIT(delta_height)
, PSTR(" S"), segments_per_second
, SP_X_STR, LINEAR_UNIT(delta_tower_angle_trim.a)
, SP_Y_STR, LINEAR_UNIT(delta_tower_angle_trim.b)
, SP_Z_STR, LINEAR_UNIT(delta_tower_angle_trim.c)
, PSTR(" A"), LINEAR_UNIT(delta_diagonal_rod_trim.a)
, PSTR(" B"), LINEAR_UNIT(delta_diagonal_rod_trim.b)
, PSTR(" C"), LINEAR_UNIT(delta_diagonal_rod_trim.c)
);
}
#elif IS_SCARA
#include "../../module/scara.h"
@ -68,6 +87,9 @@
* Parameters:
*
* S[segments-per-second] - Segments-per-second
*
* Without NO_WORKSPACE_OFFSETS:
*
* P[theta-psi-offset] - Theta-Psi offset, added to the shoulder (A/X) angle
* T[theta-offset] - Theta offset, added to the elbow (B/Y) angle
* Z[z-offset] - Z offset, added to Z
@ -76,6 +98,8 @@
* B, T, and Y are all aliases for the elbow angle
*/
void GcodeSuite::M665() {
if (!parser.seen_any()) return M665_report();
if (parser.seenval('S')) segments_per_second = parser.value_float();
#if HAS_SCARA_OFFSET
@ -107,6 +131,18 @@
#endif // HAS_SCARA_OFFSET
}
void GcodeSuite::M665_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_SCARA_SETTINGS " (" STR_SCARA_S TERN_(HAS_SCARA_OFFSET, " " STR_SCARA_P_T_Z) ")"));
SERIAL_ECHOLNPAIR_P(
PSTR(" M665 S"), segments_per_second
#if HAS_SCARA_OFFSET
, SP_P_STR, scara_home_offset.a
, SP_T_STR, scara_home_offset.b
, SP_Z_STR, LINEAR_UNIT(scara_home_offset.z)
#endif
);
}
#endif
#endif // IS_KINEMATIC

68
Marlin/src/gcode/calibrate/M666.cpp
View file

@ -36,38 +36,6 @@
#define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)
#include "../../core/debug_out.h"
void M666_report(const bool forReplay=true) {
if (!forReplay) { SERIAL_ECHOLNPGM("; Endstop adjustment:"); SERIAL_ECHO_START(); }
#if ENABLED(DELTA)
SERIAL_ECHOLNPAIR_P(
PSTR(" M666 X"), LINEAR_UNIT(delta_endstop_adj.a)
, SP_Y_STR, LINEAR_UNIT(delta_endstop_adj.b)
, SP_Z_STR, LINEAR_UNIT(delta_endstop_adj.c)
);
#else
SERIAL_ECHOPGM(" M666");
#if ENABLED(X_DUAL_ENDSTOPS)
SERIAL_ECHOLNPAIR_P(SP_X_STR, LINEAR_UNIT(endstops.x2_endstop_adj));
#endif
#if ENABLED(Y_DUAL_ENDSTOPS)
SERIAL_ECHOLNPAIR_P(SP_Y_STR, LINEAR_UNIT(endstops.y2_endstop_adj));
#endif
#if ENABLED(Z_MULTI_ENDSTOPS)
#if NUM_Z_STEPPER_DRIVERS >= 3
SERIAL_ECHOPAIR(" S2 Z", LINEAR_UNIT(endstops.z3_endstop_adj));
if (!forReplay) SERIAL_ECHO_START();
SERIAL_ECHOPAIR(" M666 S3 Z", LINEAR_UNIT(endstops.z3_endstop_adj));
#if NUM_Z_STEPPER_DRIVERS >= 4
if (!forReplay) SERIAL_ECHO_START();
SERIAL_ECHOPAIR(" M666 S4 Z", LINEAR_UNIT(endstops.z4_endstop_adj));
#endif
#else
SERIAL_ECHOLNPAIR_P(SP_Z_STR, LINEAR_UNIT(endstops.z2_endstop_adj));
#endif
#endif
#endif
}
#if ENABLED(DELTA)
/**
@ -92,6 +60,15 @@ void M666_report(const bool forReplay=true) {
if (!is_set) M666_report();
}
void GcodeSuite::M666_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_ENDSTOP_ADJUSTMENT));
SERIAL_ECHOLNPAIR_P(
PSTR(" M666 X"), LINEAR_UNIT(delta_endstop_adj.a)
, SP_Y_STR, LINEAR_UNIT(delta_endstop_adj.b)
, SP_Z_STR, LINEAR_UNIT(delta_endstop_adj.c)
);
}
#else
/**
@ -105,6 +82,8 @@ void M666_report(const bool forReplay=true) {
* Set All: M666 Z<offset>
*/
void GcodeSuite::M666() {
if (!parser.seen_any()) return M666_report();
#if ENABLED(X_DUAL_ENDSTOPS)
if (parser.seenval('X')) endstops.x2_endstop_adj = parser.value_linear_units();
#endif
@ -123,7 +102,30 @@ void M666_report(const bool forReplay=true) {
#endif
}
#endif
if (!parser.seen("XYZ")) M666_report();
}
void GcodeSuite::M666_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_ENDSTOP_ADJUSTMENT));
SERIAL_ECHOPGM(" M666");
#if ENABLED(X_DUAL_ENDSTOPS)
SERIAL_ECHOLNPAIR_P(SP_X_STR, LINEAR_UNIT(endstops.x2_endstop_adj));
#endif
#if ENABLED(Y_DUAL_ENDSTOPS)
SERIAL_ECHOLNPAIR_P(SP_Y_STR, LINEAR_UNIT(endstops.y2_endstop_adj));
#endif
#if ENABLED(Z_MULTI_ENDSTOPS)
#if NUM_Z_STEPPER_DRIVERS >= 3
SERIAL_ECHOPAIR(" S2 Z", LINEAR_UNIT(endstops.z3_endstop_adj));
report_echo_start(forReplay);
SERIAL_ECHOPAIR(" M666 S3 Z", LINEAR_UNIT(endstops.z3_endstop_adj));
#if NUM_Z_STEPPER_DRIVERS >= 4
report_echo_start(forReplay);
SERIAL_ECHOPAIR(" M666 S4 Z", LINEAR_UNIT(endstops.z4_endstop_adj));
#endif
#else
SERIAL_ECHOLNPAIR_P(SP_Z_STR, LINEAR_UNIT(endstops.z2_endstop_adj));
#endif
#endif
}
#endif // HAS_EXTRA_ENDSTOPS

34
Marlin/src/gcode/calibrate/M852.cpp
View file

@ -36,10 +36,11 @@
* K[yz_factor] - New YZ skew factor
*/
void GcodeSuite::M852() {
uint8_t ijk = 0, badval = 0, setval = 0;
if (!parser.seen("SIJK")) return M852_report();
if (parser.seen('I') || parser.seen('S')) {
++ijk;
uint8_t badval = 0, setval = 0;
if (parser.seenval('I') || parser.seenval('S')) {
const float value = parser.value_linear_units();
if (WITHIN(value, SKEW_FACTOR_MIN, SKEW_FACTOR_MAX)) {
if (planner.skew_factor.xy != value) {
@ -53,8 +54,7 @@ void GcodeSuite::M852() {
#if ENABLED(SKEW_CORRECTION_FOR_Z)
if (parser.seen('J')) {
++ijk;
if (parser.seenval('J')) {
const float value = parser.value_linear_units();
if (WITHIN(value, SKEW_FACTOR_MIN, SKEW_FACTOR_MAX)) {
if (planner.skew_factor.xz != value) {
@ -66,8 +66,7 @@ void GcodeSuite::M852() {
++badval;
}
if (parser.seen('K')) {
++ijk;
if (parser.seenval('K')) {
const float value = parser.value_linear_units();
if (WITHIN(value, SKEW_FACTOR_MIN, SKEW_FACTOR_MAX)) {
if (planner.skew_factor.yz != value) {
@ -90,17 +89,18 @@ void GcodeSuite::M852() {
sync_plan_position();
report_current_position();
}
}
if (!ijk) {
SERIAL_ECHO_START();
SERIAL_ECHOPGM("Skew Factor");
SERIAL_ECHOPAIR_F(" XY: ", planner.skew_factor.xy, 6);
#if ENABLED(SKEW_CORRECTION_FOR_Z)
SERIAL_ECHOPAIR_F(" XZ: ", planner.skew_factor.xz, 6);
SERIAL_ECHOPAIR_F(" YZ: ", planner.skew_factor.yz, 6);
#endif
SERIAL_EOL();
}
void GcodeSuite::M852_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_SKEW_FACTOR));
SERIAL_ECHOPAIR_F(" M851 I", planner.skew_factor.xy, 6);
#if ENABLED(SKEW_CORRECTION_FOR_Z)
SERIAL_ECHOPAIR_F(" J", planner.skew_factor.xz, 6);
SERIAL_ECHOPAIR_F(" K", planner.skew_factor.yz, 6);
SERIAL_ECHOLNPGM(" ; XY, XZ, YZ");
#else
SERIAL_ECHOLNPGM(" ; XY");
#endif
}
#endif // SKEW_CORRECTION_GCODE

142
Marlin/src/gcode/config/M200-M205.cpp
View file

@ -32,9 +32,14 @@
* T<extruder> - Optional extruder number. Current extruder if omitted.
* D<linear> - Set filament diameter and enable. D0 disables volumetric.
* S<bool> - Turn volumetric ON or OFF.
*
* With VOLUMETRIC_EXTRUDER_LIMIT:
*
* L<float> - Volumetric extruder limit (in mm^3/sec). L0 disables the limit.
*/
void GcodeSuite::M200() {
if (!parser.seen("DST" TERN_(VOLUMETRIC_EXTRUDER_LIMIT, "L")))
return M200_report();
const int8_t target_extruder = get_target_extruder_from_command();
if (target_extruder < 0) return;
@ -69,6 +74,37 @@
planner.calculate_volumetric_multipliers();
}
void GcodeSuite::M200_report(const bool forReplay/*=true*/) {
if (!forReplay) {
report_heading(forReplay, PSTR(STR_FILAMENT_SETTINGS), false);
if (!parser.volumetric_enabled) SERIAL_ECHOPGM(" (Disabled):");
SERIAL_EOL();
report_echo_start(forReplay);
}
#if EXTRUDERS == 1
{
SERIAL_ECHOLNPAIR(
" M200 S", parser.volumetric_enabled, " D", LINEAR_UNIT(planner.filament_size[0])
#if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
, " L", LINEAR_UNIT(planner.volumetric_extruder_limit[0])
#endif
);
}
#else
SERIAL_ECHOLNPAIR(" M200 S", parser.volumetric_enabled);
LOOP_L_N(i, EXTRUDERS) {
report_echo_start(forReplay);
SERIAL_ECHOLNPAIR(
" M200 T", i, " D", LINEAR_UNIT(planner.filament_size[i])
#if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
, " L", LINEAR_UNIT(planner.volumetric_extruder_limit[i])
#endif
);
}
#endif
}
#endif // !NO_VOLUMETRICS
/**
@ -77,6 +113,8 @@
* With multiple extruders use T to specify which one.
*/
void GcodeSuite::M201() {
if (!parser.seen("T" LOGICAL_AXES_STRING))
return M201_report();
const int8_t target_extruder = get_target_extruder_from_command();
if (target_extruder < 0) return;
@ -94,12 +132,40 @@ void GcodeSuite::M201() {
}
}
void GcodeSuite::M201_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_MAX_ACCELERATION));
SERIAL_ECHOLNPAIR_P(
LIST_N(DOUBLE(LINEAR_AXES),
PSTR(" M201 X"), LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[X_AXIS]),
SP_Y_STR, LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Y_AXIS]),
SP_Z_STR, LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Z_AXIS]),
SP_I_STR, LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[I_AXIS]),
SP_J_STR, LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[J_AXIS]),
SP_K_STR, LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[K_AXIS])
)
#if HAS_EXTRUDERS && DISABLED(DISTINCT_E_FACTORS)
, SP_E_STR, VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS])
#endif
);
#if ENABLED(DISTINCT_E_FACTORS)
LOOP_L_N(i, E_STEPPERS) {
report_echo_start(forReplay);
SERIAL_ECHOLNPAIR_P(
PSTR(" M201 T"), i
, SP_E_STR, VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(i)])
);
}
#endif
}
/**
* M203: Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in units/sec
*
* With multiple extruders use T to specify which one.
*/
void GcodeSuite::M203() {
if (!parser.seen("T" LOGICAL_AXES_STRING))
return M203_report();
const int8_t target_extruder = get_target_extruder_from_command();
if (target_extruder < 0) return;
@ -111,6 +177,32 @@ void GcodeSuite::M203() {
}
}
void GcodeSuite::M203_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_MAX_FEEDRATES));
SERIAL_ECHOLNPAIR_P(
LIST_N(DOUBLE(LINEAR_AXES),
PSTR(" M203 X"), LINEAR_UNIT(planner.settings.max_feedrate_mm_s[X_AXIS]),
SP_Y_STR, LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Y_AXIS]),
SP_Z_STR, LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Z_AXIS]),
SP_I_STR, LINEAR_UNIT(planner.settings.max_feedrate_mm_s[I_AXIS]),
SP_J_STR, LINEAR_UNIT(planner.settings.max_feedrate_mm_s[J_AXIS]),
SP_K_STR, LINEAR_UNIT(planner.settings.max_feedrate_mm_s[K_AXIS])
)
#if HAS_EXTRUDERS && DISABLED(DISTINCT_E_FACTORS)
, SP_E_STR, VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS])
#endif
);
#if ENABLED(DISTINCT_E_FACTORS)
LOOP_L_N(i, E_STEPPERS) {
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR_P(
PSTR(" M203 T"), i
, SP_E_STR, VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS_N(i)])
);
}
#endif
}
/**
* M204: Set Accelerations in units/sec^2 (M204 P1200 R3000 T3000)
*
@ -119,11 +211,8 @@ void GcodeSuite::M203() {
* T = Travel (non printing) moves
*/
void GcodeSuite::M204() {
if (!parser.seen("PRST")) {
SERIAL_ECHOPAIR("Acceleration: P", planner.settings.acceleration);
SERIAL_ECHOPAIR(" R", planner.settings.retract_acceleration);
SERIAL_ECHOLNPAIR_P(SP_T_STR, planner.settings.travel_acceleration);
}
if (!parser.seen("PRST"))
return M204_report();
else {
//planner.synchronize();
// 'S' for legacy compatibility. Should NOT BE USED for new development
@ -134,6 +223,15 @@ void GcodeSuite::M204() {
}
}
void GcodeSuite::M204_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_ACCELERATION_P_R_T));
SERIAL_ECHOLNPAIR_P(
PSTR(" M204 P"), LINEAR_UNIT(planner.settings.acceleration)
, PSTR(" R"), LINEAR_UNIT(planner.settings.retract_acceleration)
, SP_T_STR, LINEAR_UNIT(planner.settings.travel_acceleration)
);
}
/**
* M205: Set Advanced Settings
*
@ -147,7 +245,8 @@ void GcodeSuite::M204() {
* J = Junction Deviation (mm) (If not using CLASSIC_JERK)
*/
void GcodeSuite::M205() {
if (!parser.seen("BST" TERN_(HAS_JUNCTION_DEVIATION, "J") TERN_(HAS_CLASSIC_JERK, "XYZE"))) return;
if (!parser.seen("BST" TERN_(HAS_JUNCTION_DEVIATION, "J") TERN_(HAS_CLASSIC_JERK, "XYZE")))
return M205_report();
//planner.synchronize();
if (parser.seenval('B')) planner.settings.min_segment_time_us = parser.value_ulong();
@ -184,3 +283,34 @@ void GcodeSuite::M205() {
#endif
#endif // HAS_CLASSIC_JERK
}
void GcodeSuite::M205_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(
"Advanced (B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate>"
TERN_(HAS_JUNCTION_DEVIATION, " J<junc_dev>")
TERN_(HAS_CLASSIC_JERK, " X<max_x_jerk> Y<max_y_jerk> Z<max_z_jerk>")
TERN_(HAS_CLASSIC_E_JERK, " E<max_e_jerk>")
")"
));
SERIAL_ECHOLNPAIR_P(
PSTR(" M205 B"), LINEAR_UNIT(planner.settings.min_segment_time_us)
, PSTR(" S"), LINEAR_UNIT(planner.settings.min_feedrate_mm_s)
, SP_T_STR, LINEAR_UNIT(planner.settings.min_travel_feedrate_mm_s)
#if HAS_JUNCTION_DEVIATION
, PSTR(" J"), LINEAR_UNIT(planner.junction_deviation_mm)
#endif
#if HAS_CLASSIC_JERK
, LIST_N(DOUBLE(LINEAR_AXES),
SP_X_STR, LINEAR_UNIT(planner.max_jerk.x),
SP_Y_STR, LINEAR_UNIT(planner.max_jerk.y),
SP_Z_STR, LINEAR_UNIT(planner.max_jerk.z),
SP_I_STR, LINEAR_UNIT(planner.max_jerk.i),
SP_J_STR, LINEAR_UNIT(planner.max_jerk.j),
SP_K_STR, LINEAR_UNIT(planner.max_jerk.k)
)
#if HAS_CLASSIC_E_JERK
, SP_E_STR, LINEAR_UNIT(planner.max_jerk.e)
#endif
#endif
);
}

73
Marlin/src/gcode/config/M217.cpp
View file

@ -33,44 +33,6 @@
#include "../../MarlinCore.h" // for SP_X_STR, etc.
void M217_report(const bool eeprom=false) {
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
SERIAL_ECHOPGM_P(eeprom ? PSTR(" M217") : PSTR("Toolchange:"));
SERIAL_ECHOPAIR(" S", LINEAR_UNIT(toolchange_settings.swap_length));
SERIAL_ECHOPAIR_P(SP_B_STR, LINEAR_UNIT(toolchange_settings.extra_resume),
SP_E_STR, LINEAR_UNIT(toolchange_settings.extra_prime),
SP_P_STR, LINEAR_UNIT(toolchange_settings.prime_speed));
SERIAL_ECHOPAIR(" R", LINEAR_UNIT(toolchange_settings.retract_speed),
" U", LINEAR_UNIT(toolchange_settings.unretract_speed),
" F", toolchange_settings.fan_speed,
" G", toolchange_settings.fan_time);
#if ENABLED(TOOLCHANGE_MIGRATION_FEATURE)
SERIAL_ECHOPAIR(" A", migration.automode);
SERIAL_ECHOPAIR(" L", LINEAR_UNIT(migration.last));
#endif
#if ENABLED(TOOLCHANGE_PARK)
SERIAL_ECHOPAIR(" W", LINEAR_UNIT(toolchange_settings.enable_park));
SERIAL_ECHOPAIR_P(SP_X_STR, LINEAR_UNIT(toolchange_settings.change_point.x));
SERIAL_ECHOPAIR_P(SP_Y_STR, LINEAR_UNIT(toolchange_settings.change_point.y));
#endif
#if ENABLED(TOOLCHANGE_FS_PRIME_FIRST_USED)
SERIAL_ECHOPAIR(" V", LINEAR_UNIT(enable_first_prime));
#endif
#else
UNUSED(eeprom);
#endif
SERIAL_ECHOPAIR_P(SP_Z_STR, LINEAR_UNIT(toolchange_settings.z_raise));
SERIAL_EOL();
}
/**
* M217 - Set SINGLENOZZLE toolchange parameters
*
@ -168,4 +130,39 @@ void GcodeSuite::M217() {
M217_report();
}
void GcodeSuite::M217_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_TOOL_CHANGING));
SERIAL_ECHOPGM(" M217");
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
SERIAL_ECHOPAIR(" S", LINEAR_UNIT(toolchange_settings.swap_length));
SERIAL_ECHOPAIR_P(SP_B_STR, LINEAR_UNIT(toolchange_settings.extra_resume),
SP_E_STR, LINEAR_UNIT(toolchange_settings.extra_prime),
SP_P_STR, LINEAR_UNIT(toolchange_settings.prime_speed));
SERIAL_ECHOPAIR(" R", LINEAR_UNIT(toolchange_settings.retract_speed),
" U", LINEAR_UNIT(toolchange_settings.unretract_speed),
" F", toolchange_settings.fan_speed,
" G", toolchange_settings.fan_time);
#if ENABLED(TOOLCHANGE_MIGRATION_FEATURE)
SERIAL_ECHOPAIR(" A", migration.automode);
SERIAL_ECHOPAIR(" L", LINEAR_UNIT(migration.last));
#endif
#if ENABLED(TOOLCHANGE_PARK)
SERIAL_ECHOPAIR(" W", LINEAR_UNIT(toolchange_settings.enable_park));
SERIAL_ECHOPAIR_P(SP_X_STR, LINEAR_UNIT(toolchange_settings.change_point.x));
SERIAL_ECHOPAIR_P(SP_Y_STR, LINEAR_UNIT(toolchange_settings.change_point.y));
#endif
#if ENABLED(TOOLCHANGE_FS_PRIME_FIRST_USED)
SERIAL_ECHOPAIR(" V", LINEAR_UNIT(enable_first_prime));
#endif
#endif
SERIAL_ECHOLNPAIR_P(SP_Z_STR, LINEAR_UNIT(toolchange_settings.z_raise));
}
#endif // HAS_MULTI_EXTRUDER

29
Marlin/src/gcode/config/M218.cpp
View file

@ -41,6 +41,8 @@
*/
void GcodeSuite::M218() {
if (!parser.seen_any()) return M218_report();
const int8_t target_extruder = get_target_extruder_from_command();
if (target_extruder < 0) return;
@ -48,24 +50,23 @@ void GcodeSuite::M218() {
if (parser.seenval('Y')) hotend_offset[target_extruder].y = parser.value_linear_units();
if (parser.seenval('Z')) hotend_offset[target_extruder].z = parser.value_linear_units();
if (!parser.seen("XYZ")) {
SERIAL_ECHO_START();
SERIAL_ECHOPGM(STR_HOTEND_OFFSET);
HOTEND_LOOP() {
SERIAL_CHAR(' ');
SERIAL_ECHO(hotend_offset[e].x);
SERIAL_CHAR(',');
SERIAL_ECHO(hotend_offset[e].y);
SERIAL_CHAR(',');
SERIAL_ECHO_F(hotend_offset[e].z, 3);
}
SERIAL_EOL();
}
#if ENABLED(DELTA)
if (target_extruder == active_extruder)
do_blocking_move_to_xy(current_position, planner.settings.max_feedrate_mm_s[X_AXIS]);
#endif
}
void GcodeSuite::M218_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_HOTEND_OFFSETS));
LOOP_S_L_N(e, 1, HOTENDS) {
report_echo_start(forReplay);
SERIAL_ECHOPAIR_P(
PSTR(" M218 T"), e,
SP_X_STR, LINEAR_UNIT(hotend_offset[e].x),
SP_Y_STR, LINEAR_UNIT(hotend_offset[e].y)
);
SERIAL_ECHOLNPAIR_F_P(SP_Z_STR, LINEAR_UNIT(hotend_offset[e].z), 3);
}
}
#endif // HAS_HOTEND_OFFSET

37
Marlin/src/gcode/config/M281.cpp
View file

@ -34,6 +34,7 @@
* U<angle> - Stowed Angle
*/
void GcodeSuite::M281() {
if (!parser.seen_any()) return M281_report();
if (!parser.seenval('P')) return;
@ -45,24 +46,32 @@ void GcodeSuite::M281() {
return;
}
#endif
bool angle_change = false;
if (parser.seen('L')) {
servo_angles[servo_index][0] = parser.value_int();
angle_change = true;
}
if (parser.seen('U')) {
servo_angles[servo_index][1] = parser.value_int();
angle_change = true;
}
if (!angle_change) {
SERIAL_ECHO_MSG(" Servo ", servo_index,
" L", servo_angles[servo_index][0],
" U", servo_angles[servo_index][1]);
}
if (parser.seen('L')) servo_angles[servo_index][0] = parser.value_int();
if (parser.seen('U')) servo_angles[servo_index][1] = parser.value_int();
}
else
SERIAL_ERROR_MSG("Servo ", servo_index, " out of range");
}
void GcodeSuite::M281_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_SERVO_ANGLES));
LOOP_L_N(i, NUM_SERVOS) {
switch (i) {
default: break;
#if ENABLED(SWITCHING_EXTRUDER)
case SWITCHING_EXTRUDER_SERVO_NR:
#if EXTRUDERS > 3
case SWITCHING_EXTRUDER_E23_SERVO_NR:
#endif
#elif ENABLED(SWITCHING_NOZZLE)
case SWITCHING_NOZZLE_SERVO_NR:
#elif ENABLED(BLTOUCH) || (HAS_Z_SERVO_PROBE && defined(Z_SERVO_ANGLES))
case Z_PROBE_SERVO_NR:
#endif
report_echo_start(forReplay);
SERIAL_ECHOLNPAIR(" M281 P", i, " L", servo_angles[i][0], " U", servo_angles[i][1]);
}
}
}
#endif // EDITABLE_SERVO_ANGLES

63
Marlin/src/gcode/config/M301.cpp
View file

@ -46,46 +46,63 @@
* F[float] Kf term
*/
void GcodeSuite::M301() {
// multi-extruder PID patch: M301 updates or prints a single extruder's PID values
// default behavior (omitting E parameter) is to update for extruder 0 only
const uint8_t e = parser.byteval('E'); // extruder being updated
int8_t e = parser.byteval('E', -1); // extruder being updated
if (!parser.seen("PID" TERN_(PID_EXTRUSION_SCALING, "CL") TERN_(PID_FAN_SCALING, "F")))
return M301_report(true, e);
if (e == -1) e = 0;
if (e < HOTENDS) { // catch bad input value
if (parser.seen('P')) PID_PARAM(Kp, e) = parser.value_float();
if (parser.seen('I')) PID_PARAM(Ki, e) = scalePID_i(parser.value_float());
if (parser.seen('D')) PID_PARAM(Kd, e) = scalePID_d(parser.value_float());
if (parser.seenval('P')) PID_PARAM(Kp, e) = parser.value_float();
if (parser.seenval('I')) PID_PARAM(Ki, e) = scalePID_i(parser.value_float());
if (parser.seenval('D')) PID_PARAM(Kd, e) = scalePID_d(parser.value_float());
#if ENABLED(PID_EXTRUSION_SCALING)
if (parser.seen('C')) PID_PARAM(Kc, e) = parser.value_float();
if (parser.seenval('C')) PID_PARAM(Kc, e) = parser.value_float();
if (parser.seenval('L')) thermalManager.lpq_len = parser.value_int();
NOMORE(thermalManager.lpq_len, LPQ_MAX_LEN);
NOLESS(thermalManager.lpq_len, 0);
#endif
#if ENABLED(PID_FAN_SCALING)
if (parser.seen('F')) PID_PARAM(Kf, e) = parser.value_float();
if (parser.seenval('F')) PID_PARAM(Kf, e) = parser.value_float();
#endif
thermalManager.updatePID();
SERIAL_ECHO_START();
#if ENABLED(PID_PARAMS_PER_HOTEND)
SERIAL_ECHOPAIR(" e:", e); // specify extruder in serial output
#endif
SERIAL_ECHOPAIR(" p:", PID_PARAM(Kp, e),
" i:", unscalePID_i(PID_PARAM(Ki, e)),
" d:", unscalePID_d(PID_PARAM(Kd, e)));
#if ENABLED(PID_EXTRUSION_SCALING)
SERIAL_ECHOPAIR(" c:", PID_PARAM(Kc, e));
#endif
#if ENABLED(PID_FAN_SCALING)
SERIAL_ECHOPAIR(" f:", PID_PARAM(Kf, e));
#endif
SERIAL_EOL();
}
else
SERIAL_ERROR_MSG(STR_INVALID_EXTRUDER);
}
void GcodeSuite::M301_report(const bool forReplay/*=true*/, const int8_t eindex/*=-1*/) {
report_heading(forReplay, PSTR(STR_HOTEND_PID));
HOTEND_LOOP() {
if (e == eindex || eindex == -1) {
report_echo_start(forReplay);
SERIAL_ECHOPAIR_P(
#if ENABLED(PID_PARAMS_PER_HOTEND)
PSTR(" M301 E"), e, SP_P_STR
#else
PSTR(" M301 P")
#endif
, PID_PARAM(Kp, e)
, PSTR(" I"), unscalePID_i(PID_PARAM(Ki, e))
, PSTR(" D"), unscalePID_d(PID_PARAM(Kd, e))
);
#if ENABLED(PID_EXTRUSION_SCALING)
SERIAL_ECHOPAIR_P(SP_C_STR, PID_PARAM(Kc, e));
if (e == 0) SERIAL_ECHOPAIR(" L", thermalManager.lpq_len);
#endif
#if ENABLED(PID_FAN_SCALING)
SERIAL_ECHOPAIR(" F", PID_PARAM(Kf, e));
#endif
SERIAL_EOL();
}
}
}
#endif // PIDTEMP

14
Marlin/src/gcode/config/M304.cpp
View file

@ -35,15 +35,19 @@
* D<dval> - Set the D value
*/
void GcodeSuite::M304() {
if (!parser.seen("PID")) return M304_report();
if (parser.seen('P')) thermalManager.temp_bed.pid.Kp = parser.value_float();
if (parser.seen('I')) thermalManager.temp_bed.pid.Ki = scalePID_i(parser.value_float());
if (parser.seen('D')) thermalManager.temp_bed.pid.Kd = scalePID_d(parser.value_float());
}
SERIAL_ECHO_MSG(" p:", thermalManager.temp_bed.pid.Kp,
" i:", unscalePID_i(thermalManager.temp_bed.pid.Ki),
" d:", unscalePID_d(thermalManager.temp_bed.pid.Kd));
void GcodeSuite::M304_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_BED_PID));
SERIAL_ECHO_MSG(
" M304 P", thermalManager.temp_bed.pid.Kp
, " I", unscalePID_i(thermalManager.temp_bed.pid.Ki)
, " D", unscalePID_d(thermalManager.temp_bed.pid.Kd)
);
}
#endif // PIDTEMPBED

4
Marlin/src/gcode/config/M305.cpp
View file

@ -70,10 +70,10 @@ void GcodeSuite::M305() {
} // If not setting then report parameters
else if (t_index < 0) { // ...all user thermistors
LOOP_L_N(i, USER_THERMISTORS)
thermalManager.log_user_thermistor(i);
thermalManager.M305_report(i);
}
else // ...one user thermistor
thermalManager.log_user_thermistor(t_index);
thermalManager.M305_report(t_index);
}
#endif // HAS_USER_THERMISTORS

13
Marlin/src/gcode/config/M309.cpp
View file

@ -35,14 +35,19 @@
* D<dval> - Set the D value
*/
void GcodeSuite::M309() {
if (!parser.seen("PID")) return M309_report();
if (parser.seen('P')) thermalManager.temp_chamber.pid.Kp = parser.value_float();
if (parser.seen('I')) thermalManager.temp_chamber.pid.Ki = scalePID_i(parser.value_float());
if (parser.seen('D')) thermalManager.temp_chamber.pid.Kd = scalePID_d(parser.value_float());
}
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(" p:", thermalManager.temp_chamber.pid.Kp,
" i:", unscalePID_i(thermalManager.temp_chamber.pid.Ki),
" d:", unscalePID_d(thermalManager.temp_chamber.pid.Kd));
void GcodeSuite::M309_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_CHAMBER_PID));
SERIAL_ECHOLNPAIR(
" M309 P", thermalManager.temp_chamber.pid.Kp
, " I", unscalePID_i(thermalManager.temp_chamber.pid.Ki)
, " D", unscalePID_d(thermalManager.temp_chamber.pid.Kd)
);
}
#endif // PIDTEMPCHAMBER

6
Marlin/src/gcode/config/M575.cpp
View file

@ -53,13 +53,13 @@ void GcodeSuite::M575() {
case 115200: case 250000: case 500000: case 1000000: {
const int8_t port = parser.intval('P', -99);
const bool set1 = (port == -99 || port == 0);
if (set1) SERIAL_ECHO_MSG(" Serial ", AS_CHAR('0'), " baud rate set to ", baud);
if (set1) SERIAL_ECHO_MSG(" Serial ", AS_DIGIT(0), " baud rate set to ", baud);
#if HAS_MULTI_SERIAL
const bool set2 = (port == -99 || port == 1);
if (set2) SERIAL_ECHO_MSG(" Serial ", AS_CHAR('1'), " baud rate set to ", baud);
if (set2) SERIAL_ECHO_MSG(" Serial ", AS_DIGIT(1), " baud rate set to ", baud);
#ifdef SERIAL_PORT_3
const bool set3 = (port == -99 || port == 2);
if (set3) SERIAL_ECHO_MSG(" Serial ", AS_CHAR('2'), " baud rate set to ", baud);
if (set3) SERIAL_ECHO_MSG(" Serial ", AS_DIGIT(2), " baud rate set to ", baud);
#endif
#endif

73
Marlin/src/gcode/config/M92.cpp
View file

@ -23,33 +23,6 @@
#include "../gcode.h"
#include "../../module/planner.h"
void report_M92(const bool echo=true, const int8_t e=-1) {
if (echo) SERIAL_ECHO_START(); else SERIAL_CHAR(' ');
SERIAL_ECHOPAIR_P(LIST_N(DOUBLE(LINEAR_AXES),
PSTR(" M92 X"), LINEAR_UNIT(planner.settings.axis_steps_per_mm[X_AXIS]),
SP_Y_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[Y_AXIS]),
SP_Z_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[Z_AXIS]),
SP_I_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[I_AXIS]),
SP_J_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[J_AXIS]),
SP_K_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[K_AXIS]))
);
#if HAS_EXTRUDERS && DISABLED(DISTINCT_E_FACTORS)
SERIAL_ECHOPAIR_P(SP_E_STR, VOLUMETRIC_UNIT(planner.settings.axis_steps_per_mm[E_AXIS]));
#endif
SERIAL_EOL();
#if ENABLED(DISTINCT_E_FACTORS)
LOOP_L_N(i, E_STEPPERS) {
if (e >= 0 && i != e) continue;
if (echo) SERIAL_ECHO_START(); else SERIAL_CHAR(' ');
SERIAL_ECHOLNPAIR_P(PSTR(" M92 T"), i,
SP_E_STR, VOLUMETRIC_UNIT(planner.settings.axis_steps_per_mm[E_AXIS_N(i)]));
}
#endif
UNUSED(e);
}
/**
* M92: Set axis steps-per-unit for one or more axes, X, Y, Z, and E.
* (Follows the same syntax as G92)
@ -58,10 +31,11 @@ void report_M92(const bool echo=true, const int8_t e=-1) {
*
* If no argument is given print the current values.
*
* With MAGIC_NUMBERS_GCODE:
* Use 'H' and/or 'L' to get ideal layer-height information.
* 'H' specifies micro-steps to use. We guess if it's not supplied.
* 'L' specifies a desired layer height. Nearest good heights are shown.
* With MAGIC_NUMBERS_GCODE:
*
* Use 'H' and/or 'L' to get ideal layer-height information.
* H<microsteps> - Specify micro-steps to use. Best guess if not supplied.
* L<linear> - Desired layer height in current units. Nearest good heights are shown.
*/
void GcodeSuite::M92() {
@ -69,10 +43,8 @@ void GcodeSuite::M92() {
if (target_extruder < 0) return;
// No arguments? Show M92 report.
if (!parser.seen(
LOGICAL_AXIS_GANG("E", "X", "Y", "Z", AXIS4_STR, AXIS5_STR, AXIS6_STR)
TERN_(MAGIC_NUMBERS_GCODE, "HL")
)) return report_M92(true, target_extruder);
if (!parser.seen(LOGICAL_AXES_STRING TERN_(MAGIC_NUMBERS_GCODE, "HL")))
return M92_report(true, target_extruder);
LOOP_LOGICAL_AXES(i) {
if (parser.seenval(axis_codes[i])) {
@ -100,7 +72,7 @@ void GcodeSuite::M92() {
#ifndef Z_MICROSTEPS
#define Z_MICROSTEPS 16
#endif
const float wanted = parser.floatval('L');
const float wanted = parser.linearval('L');
if (parser.seen('H') || wanted) {
const uint16_t argH = parser.ushortval('H'),
micro_steps = argH ?: Z_MICROSTEPS;
@ -117,3 +89,32 @@ void GcodeSuite::M92() {
}
#endif
}
void GcodeSuite::M92_report(const bool forReplay/*=true*/, const int8_t e/*=-1*/) {
report_heading_etc(forReplay, PSTR(STR_STEPS_PER_UNIT));
SERIAL_ECHOPAIR_P(LIST_N(DOUBLE(LINEAR_AXES),
PSTR(" M92 X"), LINEAR_UNIT(planner.settings.axis_steps_per_mm[X_AXIS]),
SP_Y_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[Y_AXIS]),
SP_Z_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[Z_AXIS]),
SP_I_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[I_AXIS]),
SP_J_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[J_AXIS]),
SP_K_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[K_AXIS]))
);
#if HAS_EXTRUDERS && DISABLED(DISTINCT_E_FACTORS)
SERIAL_ECHOPAIR_P(SP_E_STR, VOLUMETRIC_UNIT(planner.settings.axis_steps_per_mm[E_AXIS]));
#endif
SERIAL_EOL();
#if ENABLED(DISTINCT_E_FACTORS)
LOOP_L_N(i, E_STEPPERS) {
if (e >= 0 && i != e) continue;
report_echo_start(forReplay);
SERIAL_ECHOLNPAIR_P(
PSTR(" M92 T"), i,
SP_E_STR, VOLUMETRIC_UNIT(planner.settings.axis_steps_per_mm[E_AXIS_N(i)])
);
}
#else
UNUSED(e);
#endif
}

4
Marlin/src/gcode/control/M17_M18_M84.cpp
View file

@ -33,7 +33,7 @@
* M17: Enable stepper motors
*/
void GcodeSuite::M17() {
if (parser.seen(LOGICAL_AXIS_GANG("E", "X", "Y", "Z", AXIS4_STR, AXIS5_STR, AXIS6_STR))) {
if (parser.seen_axis()) {
LOGICAL_AXIS_CODE(
if (TERN0(HAS_E_STEPPER_ENABLE, parser.seen_test('E'))) enable_e_steppers(),
if (parser.seen_test('X')) ENABLE_AXIS_X(),
@ -59,7 +59,7 @@ void GcodeSuite::M18_M84() {
stepper_inactive_time = parser.value_millis_from_seconds();
}
else {
if (parser.seen(LOGICAL_AXIS_GANG("E", "X", "Y", "Z", AXIS4_STR, AXIS5_STR, AXIS6_STR))) {
if (parser.seen_axis()) {
planner.synchronize();
LOGICAL_AXIS_CODE(
if (TERN0(HAS_E_STEPPER_ENABLE, parser.seen_test('E'))) disable_e_steppers(),

18
Marlin/src/gcode/control/M211.cpp
View file

@ -33,14 +33,22 @@
* Usage: M211 S1 to enable, M211 S0 to disable, M211 alone for report
*/
void GcodeSuite::M211() {
if (parser.seen('S'))
soft_endstop._enabled = parser.value_bool();
else
M211_report();
}
void GcodeSuite::M211_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_SOFT_ENDSTOPS));
SERIAL_ECHOPAIR(" M211 S", AS_DIGIT(soft_endstop._enabled), " ; ");
serialprintln_onoff(soft_endstop._enabled);
report_echo_start(forReplay);
const xyz_pos_t l_soft_min = soft_endstop.min.asLogical(),
l_soft_max = soft_endstop.max.asLogical();
SERIAL_ECHO_START();
SERIAL_ECHOPGM(STR_SOFT_ENDSTOPS);
if (parser.seen('S')) soft_endstop._enabled = parser.value_bool();
serialprint_onoff(soft_endstop._enabled);
print_pos(l_soft_min, PSTR(STR_SOFT_MIN), PSTR(" "));
print_pos(l_soft_max, PSTR(STR_SOFT_MAX));
}
#endif
#endif // HAS_SOFTWARE_ENDSTOPS

13
Marlin/src/gcode/feature/advance/M900.cpp
View file

@ -144,4 +144,17 @@ void GcodeSuite::M900() {
}
void GcodeSuite::M900_report(const bool forReplay/*=true*/) {
report_heading(forReplay, PSTR(STR_LINEAR_ADVANCE));
#if EXTRUDERS < 2
report_echo_start(forReplay);
SERIAL_ECHOLNPAIR(" M900 K", planner.extruder_advance_K[0]);
#else
LOOP_L_N(i, EXTRUDERS) {
report_echo_start(forReplay);
SERIAL_ECHOLNPAIR(" M900 T", i, " K", planner.extruder_advance_K[i]);
}
#endif
}
#endif // LIN_ADVANCE

24
Marlin/src/gcode/feature/controllerfan/M710.cpp
View file

@ -27,18 +27,6 @@
#include "../../gcode.h"
#include "../../../feature/controllerfan.h"
void M710_report(const bool forReplay=true) {
if (!forReplay) { SERIAL_ECHOLNPGM("; Controller Fan"); SERIAL_ECHO_START(); }
SERIAL_ECHOLNPAIR(" M710"
" S", int(controllerFan.settings.active_speed),
" I", int(controllerFan.settings.idle_speed),
" A", int(controllerFan.settings.auto_mode),
" D", controllerFan.settings.duration,
" ; (", (int(controllerFan.settings.active_speed) * 100) / 255, "%"
" ", (int(controllerFan.settings.idle_speed) * 100) / 255, "%)"
);
}
/**
* M710: Set controller fan settings
*
@ -78,4 +66,16 @@ void GcodeSuite::M710() {
M710_report();
}
void GcodeSuite::M710_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_CONTROLLER_FAN));
SERIAL_ECHOLNPAIR(" M710"
" S", int(controllerFan.settings.active_speed),
" I", int(controllerFan.settings.idle_speed),
" A", int(controllerFan.settings.auto_mode),
" D", controllerFan.settings.duration,
" ; (", (int(controllerFan.settings.active_speed) * 100) / 255, "%"
" ", (int(controllerFan.settings.idle_speed) * 100) / 255, "%)"
);
}
#endif // CONTROLLER_FAN_EDITABLE

42
Marlin/src/gcode/feature/digipot/M907-M910.cpp
View file

@ -22,7 +22,7 @@
#include "../../../inc/MarlinConfig.h"
#if ANY(HAS_MOTOR_CURRENT_SPI, HAS_MOTOR_CURRENT_PWM, HAS_MOTOR_CURRENT_I2C, HAS_MOTOR_CURRENT_DAC)
#if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM || HAS_MOTOR_CURRENT_I2C || HAS_MOTOR_CURRENT_DAC
#include "../../gcode.h"
@ -44,12 +44,27 @@
void GcodeSuite::M907() {
#if HAS_MOTOR_CURRENT_SPI
if (!parser.seen("BS" LOGICAL_AXES_STRING))
return M907_report();
LOOP_LOGICAL_AXES(i) if (parser.seenval(axis_codes[i])) stepper.set_digipot_current(i, parser.value_int());
if (parser.seenval('B')) stepper.set_digipot_current(4, parser.value_int());
if (parser.seenval('S')) LOOP_LE_N(i, 4) stepper.set_digipot_current(i, parser.value_int());
#elif HAS_MOTOR_CURRENT_PWM
if (!parser.seen(
#if ANY_PIN(MOTOR_CURRENT_PWM_X, MOTOR_CURRENT_PWM_Y, MOTOR_CURRENT_PWM_XY)
"XY"
#endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
"Z"
#endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
"E"
#endif
)) return M907_report();
#if ANY_PIN(MOTOR_CURRENT_PWM_X, MOTOR_CURRENT_PWM_Y, MOTOR_CURRENT_PWM_XY)
if (parser.seenval('X') || parser.seenval('Y')) stepper.set_digipot_current(0, parser.value_int());
#endif
@ -82,7 +97,30 @@ void GcodeSuite::M907() {
#endif
}
#if EITHER(HAS_MOTOR_CURRENT_SPI, HAS_MOTOR_CURRENT_DAC)
#if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM
void GcodeSuite::M907_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_STEPPER_MOTOR_CURRENTS));
#if HAS_MOTOR_CURRENT_PWM
SERIAL_ECHOLNPAIR_P( // PWM-based has 3 values:
PSTR(" M907 X"), stepper.motor_current_setting[0] // X and Y
, SP_Z_STR, stepper.motor_current_setting[1] // Z
, SP_E_STR, stepper.motor_current_setting[2] // E
);
#elif HAS_MOTOR_CURRENT_SPI
SERIAL_ECHOPGM(" M907"); // SPI-based has 5 values:
LOOP_LOGICAL_AXES(q) { // X Y Z (I J K) E (map to X Y Z (I J K) E0 by default)
SERIAL_CHAR(' ', axis_codes[q]);
SERIAL_ECHO(stepper.motor_current_setting[q]);
}
SERIAL_CHAR(' ', 'B'); // B (maps to E1 by default)
SERIAL_ECHOLN(stepper.motor_current_setting[4]);
#endif
}
#endif // HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM
#if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_DAC
/**
* M908: Control digital trimpot directly (M908 P<pin> S<current>)

25
Marlin/src/gcode/feature/fwretract/M207-M209.cpp
View file

@ -29,14 +29,34 @@
/**
* M207: Set firmware retraction values
*
* S[+units] retract_length
* W[+units] swap_retract_length (multi-extruder)
* F[units/min] retract_feedrate_mm_s
* Z[units] retract_zraise
*/
void GcodeSuite::M207() { fwretract.M207(); }
void GcodeSuite::M207_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_RETRACT_S_F_Z));
fwretract.M207_report();
}
/**
* M208: Set firmware un-retraction values
*
* S[+units] retract_recover_extra (in addition to M207 S*)
* W[+units] swap_retract_recover_extra (multi-extruder)
* F[units/min] retract_recover_feedrate_mm_s
* R[units/min] swap_retract_recover_feedrate_mm_s
*/
void GcodeSuite::M208() { fwretract.M208(); }
void GcodeSuite::M208_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_RECOVER_S_F));
fwretract.M208_report();
}
#if ENABLED(FWRETRACT_AUTORETRACT)
/**
@ -47,6 +67,11 @@ void GcodeSuite::M208() { fwretract.M208(); }
*/
void GcodeSuite::M209() { fwretract.M209(); }
void GcodeSuite::M209_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_AUTO_RETRACT_S));
fwretract.M209_report();
}
#endif
#endif // FWRETRACT

36
Marlin/src/gcode/feature/network/M552-M554.cpp
View file

@ -64,17 +64,7 @@ void ip_report(const uint16_t cmd, PGM_P const post, const IPAddress &ipo) {
if (i < 3) SERIAL_CHAR('.');
}
SERIAL_ECHOPGM(" ; ");
SERIAL_ECHOPGM_P(post);
SERIAL_EOL();
}
void M552_report() {
ip_report(552, PSTR("ip address"), Ethernet.linkStatus() == LinkON ? Ethernet.localIP() : ethernet.ip);
}
void M553_report() {
ip_report(553, PSTR("subnet mask"), Ethernet.linkStatus() == LinkON ? Ethernet.subnetMask() : ethernet.subnet);
}
void M554_report() {
ip_report(554, PSTR("gateway"), Ethernet.linkStatus() == LinkON ? Ethernet.gatewayIP() : ethernet.gateway);
SERIAL_ECHOLNPGM_P(post);
}
/**
@ -107,20 +97,36 @@ void GcodeSuite::M552() {
if (nopar || seenP) M552_report();
}
void GcodeSuite::M552_report() {
ip_report(552, PSTR("ip address"), Ethernet.linkStatus() == LinkON ? Ethernet.localIP() : ethernet.ip);
}
/**
* M553 Pnnn - Set netmask
*/
void GcodeSuite::M553() {
if (parser.seenval('P')) ethernet.subnet.fromString(parser.value_string());
M553_report();
if (parser.seenval('P'))
ethernet.subnet.fromString(parser.value_string());
else
M553_report();
}
void GcodeSuite::M553_report() {
ip_report(553, PSTR("subnet mask"), Ethernet.linkStatus() == LinkON ? Ethernet.subnetMask() : ethernet.subnet);
}
/**
* M554 Pnnn - Set Gateway
*/
void GcodeSuite::M554() {
if (parser.seenval('P')) ethernet.gateway.fromString(parser.value_string());
M554_report();
if (parser.seenval('P'))
ethernet.gateway.fromString(parser.value_string());
else
M554_report();
}
void GcodeSuite::M554_report() {
ip_report(554, PSTR("gateway"), Ethernet.linkStatus() == LinkON ? Ethernet.gatewayIP() : ethernet.gateway);
}
#endif // HAS_ETHERNET

18
Marlin/src/gcode/feature/pause/M603.cpp
View file

@ -42,6 +42,8 @@
*/
void GcodeSuite::M603() {
if (!parser.seen("TUL")) return M603_report();
const int8_t target_extruder = get_target_extruder_from_command();
if (target_extruder < 0) return;
@ -62,4 +64,20 @@ void GcodeSuite::M603() {
}
}
void GcodeSuite::M603_report(const bool forReplay/*=true*/) {
report_heading(forReplay, PSTR(STR_FILAMENT_LOAD_UNLOAD));
#if EXTRUDERS == 1
report_echo_start(forReplay);
SERIAL_ECHOPAIR(" M603 L", LINEAR_UNIT(fc_settings[0].load_length), " U", LINEAR_UNIT(fc_settings[0].unload_length), " ;");
say_units();
#else
LOOP_L_N(e, EXTRUDERS) {
report_echo_start(forReplay);
SERIAL_ECHOPAIR(" M603 T", e, " L", LINEAR_UNIT(fc_settings[e].load_length), " U", LINEAR_UNIT(fc_settings[e].unload_length), " ;");
say_units();
}
#endif
}
#endif // ADVANCED_PAUSE_FEATURE

13
Marlin/src/gcode/feature/powerloss/M413.cpp
View file

@ -40,11 +40,8 @@ void GcodeSuite::M413() {
if (parser.seen('S'))
recovery.enable(parser.value_bool());
else {
SERIAL_ECHO_START();
SERIAL_ECHOPGM("Power-loss recovery ");
serialprintln_onoff(recovery.enabled);
}
else
M413_report();
#if ENABLED(DEBUG_POWER_LOSS_RECOVERY)
if (parser.seen("RL")) recovery.load();
@ -59,4 +56,10 @@ void GcodeSuite::M413() {
#endif
}
void GcodeSuite::M413_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_POWER_LOSS_RECOVERY));
SERIAL_ECHOPAIR(" M413 S", AS_DIGIT(recovery.enabled), " ; ");
serialprintln_onoff(recovery.enabled);
}
#endif // POWER_LOSS_RECOVERY

12
Marlin/src/gcode/feature/runout/M412.cpp
View file

@ -66,4 +66,16 @@ void GcodeSuite::M412() {
}
}
void GcodeSuite::M412_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_FILAMENT_RUNOUT_SENSOR));
SERIAL_ECHOLNPAIR(
" M412 S", runout.enabled
#if HAS_FILAMENT_RUNOUT_DISTANCE
, " D", LINEAR_UNIT(runout.runout_distance())
#endif
, " ; Sensor "
);
serialprintln_onoff(runout.enabled);
}
#endif // HAS_FILAMENT_SENSOR

62
Marlin/src/gcode/feature/trinamic/M569.cpp
View file

@ -138,4 +138,66 @@ void GcodeSuite::M569() {
say_stealth_status();
}
void GcodeSuite::M569_report(const bool forReplay/*=true*/) {
report_heading(forReplay, PSTR(STR_DRIVER_STEPPING_MODE));
auto say_M569 = [](const bool forReplay, const char * const etc=nullptr, const bool eol=false) {
if (!forReplay) SERIAL_ECHO_START();
SERIAL_ECHOPGM(" M569 S1");
if (etc) {
SERIAL_CHAR(' ');
SERIAL_ECHOPGM_P(etc);
}
if (eol) SERIAL_EOL();
};
const bool chop_x = TERN0(X_HAS_STEALTHCHOP, stepperX.get_stored_stealthChop()),
chop_y = TERN0(Y_HAS_STEALTHCHOP, stepperY.get_stored_stealthChop()),
chop_z = TERN0(Z_HAS_STEALTHCHOP, stepperZ.get_stored_stealthChop()),
chop_i = TERN0(I_HAS_STEALTHCHOP, stepperI.get_stored_stealthChop()),
chop_j = TERN0(J_HAS_STEALTHCHOP, stepperJ.get_stored_stealthChop()),
chop_k = TERN0(K_HAS_STEALTHCHOP, stepperK.get_stored_stealthChop());
if (chop_x || chop_y || chop_z || chop_i || chop_j || chop_k) {
say_M569(forReplay);
LINEAR_AXIS_CODE(
if (chop_x) SERIAL_ECHOPGM_P(SP_X_STR),
if (chop_y) SERIAL_ECHOPGM_P(SP_Y_STR),
if (chop_z) SERIAL_ECHOPGM_P(SP_Z_STR),
if (chop_i) SERIAL_ECHOPGM_P(SP_I_STR),
if (chop_j) SERIAL_ECHOPGM_P(SP_J_STR),
if (chop_k) SERIAL_ECHOPGM_P(SP_K_STR)
);
SERIAL_EOL();
}
const bool chop_x2 = TERN0(X2_HAS_STEALTHCHOP, stepperX2.get_stored_stealthChop()),
chop_y2 = TERN0(Y2_HAS_STEALTHCHOP, stepperY2.get_stored_stealthChop()),
chop_z2 = TERN0(Z2_HAS_STEALTHCHOP, stepperZ2.get_stored_stealthChop());
if (chop_x2 || chop_y2 || chop_z2) {
say_M569(forReplay, PSTR("I1"));
if (chop_x2) SERIAL_ECHOPGM_P(SP_X_STR);
if (chop_y2) SERIAL_ECHOPGM_P(SP_Y_STR);
if (chop_z2) SERIAL_ECHOPGM_P(SP_Z_STR);
SERIAL_EOL();
}
if (TERN0(Z3_HAS_STEALTHCHOP, stepperZ3.get_stored_stealthChop())) { say_M569(forReplay, PSTR("I2 Z"), true); }
if (TERN0(Z4_HAS_STEALTHCHOP, stepperZ4.get_stored_stealthChop())) { say_M569(forReplay, PSTR("I3 Z"), true); }
if (TERN0( I_HAS_STEALTHCHOP, stepperI.get_stored_stealthChop())) { say_M569(forReplay, SP_I_STR, true); }
if (TERN0( J_HAS_STEALTHCHOP, stepperJ.get_stored_stealthChop())) { say_M569(forReplay, SP_J_STR, true); }
if (TERN0( K_HAS_STEALTHCHOP, stepperK.get_stored_stealthChop())) { say_M569(forReplay, SP_K_STR, true); }
if (TERN0(E0_HAS_STEALTHCHOP, stepperE0.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T0 E"), true); }
if (TERN0(E1_HAS_STEALTHCHOP, stepperE1.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T1 E"), true); }
if (TERN0(E2_HAS_STEALTHCHOP, stepperE2.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T2 E"), true); }
if (TERN0(E3_HAS_STEALTHCHOP, stepperE3.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T3 E"), true); }
if (TERN0(E4_HAS_STEALTHCHOP, stepperE4.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T4 E"), true); }
if (TERN0(E5_HAS_STEALTHCHOP, stepperE5.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T5 E"), true); }
if (TERN0(E6_HAS_STEALTHCHOP, stepperE6.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T6 E"), true); }
if (TERN0(E7_HAS_STEALTHCHOP, stepperE7.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T7 E"), true); }
}
#endif // HAS_STEALTHCHOP

95
Marlin/src/gcode/feature/trinamic/M906.cpp
View file

@ -198,4 +198,99 @@ void GcodeSuite::M906() {
}
}
void GcodeSuite::M906_report(const bool forReplay/*=true*/) {
report_heading(forReplay, PSTR(STR_STEPPER_DRIVER_CURRENT));
auto say_M906 = [](const bool forReplay) {
report_echo_start(forReplay);
SERIAL_ECHOPGM(" M906");
};
#if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z)
say_M906(forReplay);
#if AXIS_IS_TMC(X)
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX.getMilliamps());
#endif
#if AXIS_IS_TMC(Y)
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY.getMilliamps());
#endif
#if AXIS_IS_TMC(Z)
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ.getMilliamps());
#endif
SERIAL_EOL();
#endif
#if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2)
say_M906(forReplay);
SERIAL_ECHOPGM(" I1");
#if AXIS_IS_TMC(X2)
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX2.getMilliamps());
#endif
#if AXIS_IS_TMC(Y2)
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY2.getMilliamps());
#endif
#if AXIS_IS_TMC(Z2)
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ2.getMilliamps());
#endif
SERIAL_EOL();
#endif
#if AXIS_IS_TMC(Z3)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" I2 Z", stepperZ3.getMilliamps());
#endif
#if AXIS_IS_TMC(Z4)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" I3 Z", stepperZ4.getMilliamps());
#endif
#if AXIS_IS_TMC(I)
say_M906(forReplay);
SERIAL_ECHOLNPAIR_P(SP_I_STR, stepperI.getMilliamps());
#endif
#if AXIS_IS_TMC(J)
say_M906(forReplay);
SERIAL_ECHOLNPAIR_P(SP_J_STR, stepperJ.getMilliamps());
#endif
#if AXIS_IS_TMC(K)
say_M906(forReplay);
SERIAL_ECHOLNPAIR_P(SP_K_STR, stepperK.getMilliamps());
#endif
#if AXIS_IS_TMC(E0)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T0 E", stepperE0.getMilliamps());
#endif
#if AXIS_IS_TMC(E1)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T1 E", stepperE1.getMilliamps());
#endif
#if AXIS_IS_TMC(E2)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T2 E", stepperE2.getMilliamps());
#endif
#if AXIS_IS_TMC(E3)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T3 E", stepperE3.getMilliamps());
#endif
#if AXIS_IS_TMC(E4)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T4 E", stepperE4.getMilliamps());
#endif
#if AXIS_IS_TMC(E5)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T5 E", stepperE5.getMilliamps());
#endif
#if AXIS_IS_TMC(E6)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T6 E", stepperE6.getMilliamps());
#endif
#if AXIS_IS_TMC(E7)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T7 E", stepperE7.getMilliamps());
#endif
SERIAL_EOL();
}
#endif // HAS_TRINAMIC_CONFIG

160
Marlin/src/gcode/feature/trinamic/M911-M914.cpp
View file

@ -227,6 +227,7 @@
* M913: Set HYBRID_THRESHOLD speed.
*/
#if ENABLED(HYBRID_THRESHOLD)
void GcodeSuite::M913() {
#define TMC_SAY_PWMTHRS(A,Q) tmc_print_pwmthrs(stepper##Q)
#define TMC_SET_PWMTHRS(A,Q) stepper##Q.set_pwm_thrs(value)
@ -308,12 +309,109 @@
TERN_(E7_HAS_STEALTHCHOP, TMC_SAY_PWMTHRS_E(7));
}
}
void GcodeSuite::M913_report(const bool forReplay/*=true*/) {
report_heading(forReplay, PSTR(STR_HYBRID_THRESHOLD));
auto say_M913 = [](const bool forReplay) {
report_echo_start(forReplay);
SERIAL_ECHOPGM(" M913");
};
#if X_HAS_STEALTHCHOP || Y_HAS_STEALTHCHOP || Z_HAS_STEALTHCHOP
say_M913(forReplay);
#if X_HAS_STEALTHCHOP
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX.get_pwm_thrs());
#endif
#if Y_HAS_STEALTHCHOP
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY.get_pwm_thrs());
#endif
#if Z_HAS_STEALTHCHOP
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ.get_pwm_thrs());
#endif
SERIAL_EOL();
#endif
#if X2_HAS_STEALTHCHOP || Y2_HAS_STEALTHCHOP || Z2_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOPGM(" I1");
#if X2_HAS_STEALTHCHOP
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX2.get_pwm_thrs());
#endif
#if Y2_HAS_STEALTHCHOP
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY2.get_pwm_thrs());
#endif
#if Z2_HAS_STEALTHCHOP
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ2.get_pwm_thrs());
#endif
SERIAL_EOL();
#endif
#if Z3_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" I2 Z", stepperZ3.get_pwm_thrs());
#endif
#if Z4_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" I3 Z", stepperZ4.get_pwm_thrs());
#endif
#if I_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR_P(SP_I_STR, stepperI.get_pwm_thrs());
#endif
#if J_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR_P(SP_J_STR, stepperJ.get_pwm_thrs());
#endif
#if K_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR_P(SP_K_STR, stepperK.get_pwm_thrs());
#endif
#if E0_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T0 E", stepperE0.get_pwm_thrs());
#endif
#if E1_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T1 E", stepperE1.get_pwm_thrs());
#endif
#if E2_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T2 E", stepperE2.get_pwm_thrs());
#endif
#if E3_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T3 E", stepperE3.get_pwm_thrs());
#endif
#if E4_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T4 E", stepperE4.get_pwm_thrs());
#endif
#if E5_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T5 E", stepperE5.get_pwm_thrs());
#endif
#if E6_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T6 E", stepperE6.get_pwm_thrs());
#endif
#if E7_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T7 E", stepperE7.get_pwm_thrs());
#endif
SERIAL_EOL();
}
#endif // HYBRID_THRESHOLD
/**
* M914: Set StallGuard sensitivity.
*/
#if USE_SENSORLESS
void GcodeSuite::M914() {
bool report = true;
@ -412,6 +510,68 @@
#endif
}
}
void GcodeSuite::M914_report(const bool forReplay/*=true*/) {
report_heading(forReplay, PSTR(STR_STALLGUARD_THRESHOLD));
auto say_M914 = [](const bool forReplay) {
report_echo_start(forReplay);
SERIAL_ECHOPGM(" M914");
};
#if X_SENSORLESS || Y_SENSORLESS || Z_SENSORLESS
say_M914(forReplay);
#if X_SENSORLESS
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX.homing_threshold());
#endif
#if Y_SENSORLESS
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY.homing_threshold());
#endif
#if Z_SENSORLESS
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ.homing_threshold());
#endif
SERIAL_EOL();
#endif
#if X2_SENSORLESS || Y2_SENSORLESS || Z2_SENSORLESS
say_M914(forReplay);
SERIAL_ECHOPGM(" I1");
#if X2_SENSORLESS
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX2.homing_threshold());
#endif
#if Y2_SENSORLESS
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY2.homing_threshold());
#endif
#if Z2_SENSORLESS
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ2.homing_threshold());
#endif
SERIAL_EOL();
#endif
#if Z3_SENSORLESS
say_M914(forReplay);
SERIAL_ECHOLNPAIR(" I2 Z", stepperZ3.homing_threshold());
#endif
#if Z4_SENSORLESS
say_M914(forReplay);
SERIAL_ECHOLNPAIR(" I3 Z", stepperZ4.homing_threshold());
#endif
#if I_SENSORLESS
say_M914(forReplay);
SERIAL_ECHOLNPAIR_P(SP_I_STR, stepperI.homing_threshold());
#endif
#if J_SENSORLESS
say_M914(forReplay);
SERIAL_ECHOLNPAIR_P(SP_J_STR, stepperJ.homing_threshold());
#endif
#if K_SENSORLESS
say_M914(forReplay);
SERIAL_ECHOLNPAIR_P(SP_K_STR, stepperK.homing_threshold());
#endif
}
#endif // USE_SENSORLESS
#endif // HAS_TRINAMIC_CONFIG

20
Marlin/src/gcode/gcode.cpp
View file

@ -102,6 +102,24 @@ uint8_t GcodeSuite::axis_relative = 0 LOGICAL_AXIS_GANG(
xyz_pos_t GcodeSuite::coordinate_system[MAX_COORDINATE_SYSTEMS];
#endif
void GcodeSuite::report_echo_start(const bool forReplay) { if (!forReplay) SERIAL_ECHO_START(); }
void GcodeSuite::report_heading(const bool forReplay, PGM_P const pstr, const bool eol/*=true*/) {
if (forReplay) return;
if (pstr) {
SERIAL_ECHO_START();
SERIAL_ECHOPGM("; ");
SERIAL_ECHOPGM_P(pstr);
}
if (eol) { SERIAL_CHAR(':'); SERIAL_EOL(); }
}
void GcodeSuite::say_units() {
SERIAL_ECHOLNPGM_P(
TERN_(INCH_MODE_SUPPORT, parser.linear_unit_factor != 1.0 ? PSTR(" (in)") :)
PSTR(" (mm)")
);
}
/**
* Get the target extruder from the T parameter or the active_extruder
* Return -1 if the T parameter is out of range
@ -180,7 +198,7 @@ void GcodeSuite::get_destination_from_command() {
recovery.save();
#endif
if (parser.linearval('F') > 0)
if (parser.floatval('F') > 0)
feedrate_mm_s = parser.value_feedrate();
#if ENABLED(PRINTCOUNTER)

81
Marlin/src/gcode/gcode.h
View file

@ -379,6 +379,14 @@ public:
return ELAPSED(ms, previous_move_ms + stepper_inactive_time);
}
static void report_echo_start(const bool forReplay);
static void report_heading(const bool forReplay, PGM_P const pstr, const bool eol=true);
static inline void report_heading_etc(const bool forReplay, PGM_P const pstr, const bool eol=true) {
report_heading(forReplay, pstr, eol);
report_echo_start(forReplay);
}
static void say_units();
static int8_t get_target_extruder_from_command();
static int8_t get_target_e_stepper_from_command();
static void get_destination_from_command();
@ -434,6 +442,8 @@ public:
private:
friend class MarlinSettings;
#if ENABLED(MARLIN_DEV_MODE)
static void D(const int16_t dcode);
#endif
@ -514,6 +524,7 @@ private:
#if ENABLED(Z_STEPPER_AUTO_ALIGN)
static void M422();
static void M422_report(const bool forReplay=true);
#endif
#if ENABLED(ASSISTED_TRAMMING)
@ -658,6 +669,7 @@ private:
static void M85();
static void M92();
static void M92_report(const bool forReplay=true, const int8_t e=-1);
#if ENABLED(M100_FREE_MEMORY_WATCHER)
static void M100();
@ -737,10 +749,12 @@ private:
#if PREHEAT_COUNT
static void M145();
static void M145_report(const bool forReplay=true);
#endif
#if ENABLED(TEMPERATURE_UNITS_SUPPORT)
static void M149();
static void M149_report(const bool forReplay=true);
#endif
#if HAS_COLOR_LEDS
@ -766,37 +780,51 @@ private:
#endif
#endif
static void M200();
#if DISABLED(NO_VOLUMETRICS)
static void M200();
static void M200_report(const bool forReplay=true);
#endif
static void M201();
static void M201_report(const bool forReplay=true);
#if 0
static void M202(); // Not used for Sprinter/grbl gen6
#endif
static void M203();
static void M203_report(const bool forReplay=true);
static void M204();
static void M204_report(const bool forReplay=true);
static void M205();
static void M205_report(const bool forReplay=true);
#if HAS_M206_COMMAND
static void M206();
static void M206_report(const bool forReplay=true);
#endif
#if ENABLED(FWRETRACT)
static void M207();
static void M207_report(const bool forReplay=true);
static void M208();
static void M208_report(const bool forReplay=true);
#if ENABLED(FWRETRACT_AUTORETRACT)
static void M209();
static void M209_report(const bool forReplay=true);
#endif
#endif
static void M211();
static void M211_report(const bool forReplay=true);
#if HAS_MULTI_EXTRUDER
static void M217();
static void M217_report(const bool forReplay=true);
#endif
#if HAS_HOTEND_OFFSET
static void M218();
static void M218_report(const bool forReplay=true);
#endif
static void M220();
@ -815,10 +843,12 @@ private:
#if HAS_LCD_CONTRAST
static void M250();
static void M250_report(const bool forReplay=true);
#endif
#if HAS_LCD_BRIGHTNESS
static void M256();
static void M256_report(const bool forReplay=true);
#endif
#if ENABLED(EXPERIMENTAL_I2CBUS)
@ -830,6 +860,7 @@ private:
static void M280();
#if ENABLED(EDITABLE_SERVO_ANGLES)
static void M281();
static void M281_report(const bool forReplay=true);
#endif
#endif
@ -843,6 +874,7 @@ private:
#if ENABLED(PIDTEMP)
static void M301();
static void M301_report(const bool forReplay=true, const int8_t eindex=-1);
#endif
#if ENABLED(PREVENT_COLD_EXTRUSION)
@ -855,6 +887,7 @@ private:
#if ENABLED(PIDTEMPBED)
static void M304();
static void M304_report(const bool forReplay=true);
#endif
#if HAS_USER_THERMISTORS
@ -863,6 +896,7 @@ private:
#if ENABLED(PIDTEMPCHAMBER)
static void M309();
static void M309_report(const bool forReplay=true);
#endif
#if HAS_MICROSTEPS
@ -911,19 +945,23 @@ private:
#if HAS_FILAMENT_SENSOR
static void M412();
static void M412_report(const bool forReplay=true);
#endif
#if HAS_MULTI_LANGUAGE
static void M414();
static void M414_report(const bool forReplay=true);
#endif
#if HAS_LEVELING
static void M420();
static void M420_report(const bool forReplay=true);
static void M421();
#endif
#if ENABLED(BACKLASH_GCODE)
static void M425();
static void M425_report(const bool forReplay=true);
#endif
#if HAS_M206_COMMAND
@ -968,8 +1006,16 @@ private:
#if HAS_ETHERNET
static void M552();
static void M552_report();
static void M553();
static void M553_report();
static void M554();
static void M554_report();
#endif
#if HAS_STEALTHCHOP
static void M569();
static void M569_report(const bool forReplay=true);
#endif
#if ENABLED(BAUD_RATE_GCODE)
@ -979,6 +1025,7 @@ private:
#if ENABLED(ADVANCED_PAUSE_FEATURE)
static void M600();
static void M603();
static void M603_report(const bool forReplay=true);
#endif
#if HAS_DUPLICATION_MODE
@ -987,10 +1034,12 @@ private:
#if IS_KINEMATIC
static void M665();
static void M665_report(const bool forReplay=true);
#endif
#if ENABLED(DELTA) || HAS_EXTRA_ENDSTOPS
#if EITHER(DELTA, HAS_EXTRA_ENDSTOPS)
static void M666();
static void M666_report(const bool forReplay=true);
#endif
#if ENABLED(DUET_SMART_EFFECTOR) && PIN_EXISTS(SMART_EFFECTOR_MOD)
@ -1012,10 +1061,12 @@ private:
#if HAS_BED_PROBE
static void M851();
static void M851_report(const bool forReplay=true);
#endif
#if ENABLED(SKEW_CORRECTION_GCODE)
static void M852();
static void M852_report(const bool forReplay=true);
#endif
#if ENABLED(I2C_POSITION_ENCODERS)
@ -1038,23 +1089,24 @@ private:
#if ENABLED(LIN_ADVANCE)
static void M900();
static void M900_report(const bool forReplay=true);
#endif
#if HAS_TRINAMIC_CONFIG
static void M122();
static void M906();
#if HAS_STEALTHCHOP
static void M569();
#endif
static void M906_report(const bool forReplay=true);
#if ENABLED(MONITOR_DRIVER_STATUS)
static void M911();
static void M912();
#endif
#if ENABLED(HYBRID_THRESHOLD)
static void M913();
static void M913_report(const bool forReplay=true);
#endif
#if ENABLED(USE_SENSORLESS)
static void M914();
static void M914_report(const bool forReplay=true);
#endif
#endif
@ -1066,16 +1118,19 @@ private:
static void M918();
#endif
#if ANY(HAS_MOTOR_CURRENT_SPI, HAS_MOTOR_CURRENT_PWM, HAS_MOTOR_CURRENT_I2C, HAS_MOTOR_CURRENT_DAC)
#if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM || HAS_MOTOR_CURRENT_I2C || HAS_MOTOR_CURRENT_DAC
static void M907();
#if EITHER(HAS_MOTOR_CURRENT_SPI, HAS_MOTOR_CURRENT_DAC)
static void M908();
#if HAS_MOTOR_CURRENT_DAC
static void M909();
static void M910();
#endif
#if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM
static void M907_report(const bool forReplay=true);
#endif
#endif
#if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_DAC
static void M908();
#endif
#if HAS_MOTOR_CURRENT_DAC
static void M909();
static void M910();
#endif
#if ENABLED(SDSUPPORT)
static void M928();
@ -1102,6 +1157,7 @@ private:
#if ENABLED(POWER_LOSS_RECOVERY)
static void M413();
static void M413_report(const bool forReplay=true);
static void M1000();
#endif
@ -1123,6 +1179,7 @@ private:
#if ENABLED(CONTROLLER_FAN_EDITABLE)
static void M710();
static void M710_report(const bool forReplay=true);
#endif
static void T(const int8_t tool_index);

38
Marlin/src/gcode/geometry/M206_M428.cpp
View file

@ -30,19 +30,6 @@
#include "../../libs/buzzer.h"
#include "../../MarlinCore.h"
void M206_report() {
SERIAL_ECHOLNPAIR_P(
LIST_N(DOUBLE(LINEAR_AXES),
PSTR("M206 X"), home_offset.x,
SP_Y_STR, home_offset.y,
SP_Z_STR, home_offset.z,
SP_I_STR, home_offset.i,
SP_J_STR, home_offset.j,
SP_K_STR, home_offset.k,
)
);
}
/**
* M206: Set Additional Homing Offset (X Y Z). SCARA aliases T=X, P=Y
*
@ -51,6 +38,8 @@ void M206_report() {
* *** In the 2.0 release, it will simply be disabled by default.
*/
void GcodeSuite::M206() {
if (!parser.seen_any()) return M206_report();
LOOP_LINEAR_AXES(i)
if (parser.seen(AXIS_CHAR(i)))
set_home_offset((AxisEnum)i, parser.value_linear_units());
@ -60,10 +49,25 @@ void GcodeSuite::M206() {
if (parser.seen('P')) set_home_offset(B_AXIS, parser.value_float()); // Psi
#endif
if (!parser.seen(LINEAR_AXIS_GANG("X", "Y", "Z", "I", "J", "K")))
M206_report();
else
report_current_position();
report_current_position();
}
void GcodeSuite::M206_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_HOME_OFFSET));
SERIAL_ECHOLNPAIR_P(
#if IS_CARTESIAN
LIST_N(DOUBLE(LINEAR_AXES),
PSTR(" M206 X"), LINEAR_UNIT(home_offset.x),
SP_Y_STR, LINEAR_UNIT(home_offset.y),
SP_Z_STR, LINEAR_UNIT(home_offset.z),
SP_I_STR, LINEAR_UNIT(home_offset.i),
SP_J_STR, LINEAR_UNIT(home_offset.j),
SP_K_STR, LINEAR_UNIT(home_offset.k)
)
#else
PSTR(" M206 Z"), LINEAR_UNIT(home_offset.z)
#endif
);
}
/**

19
Marlin/src/gcode/lcd/M145.cpp
View file

@ -60,4 +60,23 @@ void GcodeSuite::M145() {
}
}
void GcodeSuite::M145_report(const bool forReplay/*=true*/) {
report_heading(forReplay, PSTR(STR_MATERIAL_HEATUP));
LOOP_L_N(i, PREHEAT_COUNT) {
report_echo_start(forReplay);
SERIAL_ECHOLNPAIR_P(
PSTR(" M145 S"), i
#if HAS_HOTEND
, PSTR(" H"), parser.to_temp_units(ui.material_preset[i].hotend_temp)
#endif
#if HAS_HEATED_BED
, SP_B_STR, parser.to_temp_units(ui.material_preset[i].bed_temp)
#endif
#if HAS_FAN
, PSTR(" F"), ui.material_preset[i].fan_speed
#endif
);
}
}
#endif // PREHEAT_COUNT

12
Marlin/src/gcode/lcd/M250.cpp
View file

@ -19,7 +19,6 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if HAS_LCD_CONTRAST
@ -31,8 +30,15 @@
* M250: Read and optionally set the LCD contrast
*/
void GcodeSuite::M250() {
if (parser.seen('C')) ui.set_contrast(parser.value_int());
SERIAL_ECHOLNPAIR("LCD Contrast: ", ui.contrast);
if (parser.seenval('C'))
ui.set_contrast(parser.value_int());
else
M250_report();
}
void GcodeSuite::M250_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_LCD_CONTRAST));
SERIAL_ECHOLNPAIR(" M250 C", ui.contrast);
}
#endif // HAS_LCD_CONTRAST

11
Marlin/src/gcode/lcd/M256.cpp
View file

@ -30,8 +30,15 @@
* M256: Set the LCD brightness
*/
void GcodeSuite::M256() {
if (parser.seenval('B')) ui.set_brightness(parser.value_int());
SERIAL_ECHOLNPAIR("LCD Brightness: ", ui.brightness);
if (parser.seenval('B'))
ui.set_brightness(parser.value_int());
else
M256_report();
}
void GcodeSuite::M256_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_LCD_BRIGHTNESS));
SERIAL_ECHOLNPAIR(" M256 B", ui.brightness);
}
#endif // HAS_LCD_BRIGHTNESS

7
Marlin/src/gcode/lcd/M414.cpp
View file

@ -38,7 +38,14 @@ void GcodeSuite::M414() {
if (parser.seenval('S'))
ui.set_language(parser.value_byte());
else
M414_report();
}
void GcodeSuite::M414_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_UI_LANGUAGE));
SERIAL_ECHOLNPAIR(" M414 S", ui.language);
}
#endif // HAS_MULTI_LANGUAGE

17
Marlin/src/gcode/parser.h
View file

@ -225,9 +225,7 @@ public:
#endif // !FASTER_GCODE_PARSER
// Seen any axis parameter
static inline bool seen_axis() {
return seen(LOGICAL_AXIS_GANG("E", "X", "Y", "Z", AXIS4_STR, AXIS5_STR, AXIS6_STR));
}
static inline bool seen_axis() { return seen(LOGICAL_AXES_STRING); }
#if ENABLED(GCODE_QUOTED_STRINGS)
static char* unescape_string(char* &src);
@ -350,14 +348,15 @@ public:
static inline void set_input_temp_units(const TempUnit units) { input_temp_units = units; }
static inline char temp_units_code() {
return input_temp_units == TEMPUNIT_K ? 'K' : input_temp_units == TEMPUNIT_F ? 'F' : 'C';
}
static inline PGM_P temp_units_name() {
return input_temp_units == TEMPUNIT_K ? PSTR("Kelvin") : input_temp_units == TEMPUNIT_F ? PSTR("Fahrenheit") : PSTR("Celsius");
}
#if HAS_LCD_MENU && DISABLED(DISABLE_M503)
static inline char temp_units_code() {
return input_temp_units == TEMPUNIT_K ? 'K' : input_temp_units == TEMPUNIT_F ? 'F' : 'C';
}
static inline PGM_P temp_units_name() {
return input_temp_units == TEMPUNIT_K ? PSTR("Kelvin") : input_temp_units == TEMPUNIT_F ? PSTR("Fahrenheit") : PSTR("Celsius");
}
static inline float to_temp_units(celsius_t c) {
switch (input_temp_units) {
default:

31
Marlin/src/gcode/probe/M851.cpp
View file

@ -32,19 +32,8 @@
* M851: Set the nozzle-to-probe offsets in current units
*/
void GcodeSuite::M851() {
// Show usage with no parameters
if (!parser.seen("XYZ")) {
SERIAL_ECHOLNPAIR_P(
#if HAS_PROBE_XY_OFFSET
PSTR(STR_PROBE_OFFSET " X"), probe.offset_xy.x, SP_Y_STR, probe.offset_xy.y, SP_Z_STR
#else
PSTR(STR_PROBE_OFFSET " X0 Y0 Z")
#endif
, probe.offset.z
);
return;
}
// No parameters? Show current state.
if (!parser.seen("XYZ")) return M851_report();
// Start with current offsets and modify
xyz_pos_t offs = probe.offset;
@ -94,4 +83,20 @@ void GcodeSuite::M851() {
if (ok) probe.offset = offs;
}
void GcodeSuite::M851_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_Z_PROBE_OFFSET));
SERIAL_ECHOPAIR_P(
#if HAS_PROBE_XY_OFFSET
PSTR(" M851 X"), LINEAR_UNIT(probe.offset_xy.x),
SP_Y_STR, LINEAR_UNIT(probe.offset_xy.y),
SP_Z_STR
#else
PSTR(" M851 X0 Y0 Z")
#endif
, LINEAR_UNIT(probe.offset.z)
, " ;"
);
say_units();
}
#endif // HAS_BED_PROBE

7
Marlin/src/gcode/units/M149.cpp
View file

@ -33,6 +33,13 @@ void GcodeSuite::M149() {
if (parser.seenval('C')) parser.set_input_temp_units(TEMPUNIT_C);
else if (parser.seenval('K')) parser.set_input_temp_units(TEMPUNIT_K);
else if (parser.seenval('F')) parser.set_input_temp_units(TEMPUNIT_F);
else M149_report();
}
void GcodeSuite::M149_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_TEMPERATURE_UNITS));
SERIAL_ECHOPAIR(" M149 ", AS_CHAR(parser.temp_units_code()), " ; Units in ");
SERIAL_ECHOLNPGM_P(parser.temp_units_name());
}
#endif // TEMPERATURE_UNITS_SUPPORT

4
Marlin/src/module/endstops.cpp
View file

@ -578,13 +578,13 @@ void _O2 Endstops::report_states() {
default: continue;
REPEAT_1(NUM_RUNOUT_SENSORS, _CASE_RUNOUT)
}
SERIAL_ECHOPGM(STR_FILAMENT_RUNOUT_SENSOR);
SERIAL_ECHOPGM(STR_FILAMENT);
if (i > 1) SERIAL_CHAR(' ', '0' + i);
print_es_state(extDigitalRead(pin) != state);
}
#undef _CASE_RUNOUT
#elif HAS_FILAMENT_SENSOR
print_es_state(READ(FIL_RUNOUT1_PIN) != FIL_RUNOUT1_STATE, PSTR(STR_FILAMENT_RUNOUT_SENSOR));
print_es_state(READ(FIL_RUNOUT1_PIN) != FIL_RUNOUT1_STATE, PSTR(STR_FILAMENT));
#endif
TERN_(BLTOUCH, bltouch._reset_SW_mode());

994
Marlin/src/module/settings.cpp
View file

File diff suppressed because it is too large Load diff

31
Marlin/src/module/temperature.cpp
View file

@ -59,6 +59,10 @@
#include "../feature/host_actions.h"
#endif
#if HAS_TEMP_SENSOR
#include "../gcode/gcode.h"
#endif
// MAX TC related macros
#define TEMP_SENSOR_IS_MAX(n, M) (ENABLED(TEMP_SENSOR_##n##_IS_MAX##M) || (ENABLED(TEMP_SENSOR_REDUNDANT_IS_MAX##M) && REDUNDANT_TEMP_MATCH(SOURCE, E##n)))
#define TEMP_SENSOR_IS_ANY_MAX_TC(n) (ENABLED(TEMP_SENSOR_##n##_IS_MAX_TC) || (ENABLED(TEMP_SENSOR_REDUNDANT_IS_MAX_TC) && REDUNDANT_TEMP_MATCH(SOURCE, E##n)))
@ -1722,13 +1726,9 @@ void Temperature::manage_heater() {
COPY(user_thermistor, default_user_thermistor);
}
void Temperature::log_user_thermistor(const uint8_t t_index, const bool eprom/*=false*/) {
if (eprom)
SERIAL_ECHOPGM(" M305 ");
else
SERIAL_ECHO_START();
SERIAL_CHAR('P', '0' + t_index);
void Temperature::M305_report(const uint8_t t_index, const bool forReplay/*=true*/) {
gcode.report_heading_etc(forReplay, PSTR(STR_USER_THERMISTORS));
SERIAL_ECHOPAIR(" M305 P", AS_DIGIT(t_index));
const user_thermistor_t &t = user_thermistor[t_index];
@ -1794,13 +1794,13 @@ void Temperature::manage_heater() {
// Derived from RepRap FiveD extruder::getTemperature()
// For hot end temperature measurement.
celsius_float_t Temperature::analog_to_celsius_hotend(const int16_t raw, const uint8_t e) {
if (e >= HOTENDS) {
SERIAL_ERROR_START();
SERIAL_ECHO(e);
SERIAL_ECHOLNPGM(STR_INVALID_EXTRUDER_NUM);
kill();
return 0;
}
if (e >= HOTENDS) {
SERIAL_ERROR_START();
SERIAL_ECHO(e);
SERIAL_ECHOLNPGM(STR_INVALID_EXTRUDER_NUM);
kill();
return 0;
}
switch (e) {
case 0:
@ -3490,9 +3490,6 @@ void Temperature::isr() {
}
#if HAS_TEMP_SENSOR
#include "../gcode/gcode.h"
/**
* Print a single heater state in the form:
* Bed: " B:nnn.nn /nnn.nn"

2
Marlin/src/module/temperature.h
View file

@ -527,7 +527,7 @@ class Temperature {
#if HAS_USER_THERMISTORS
static user_thermistor_t user_thermistor[USER_THERMISTORS];
static void log_user_thermistor(const uint8_t t_index, const bool eprom=false);
static void M305_report(const uint8_t t_index, const bool forReplay=true);
static void reset_user_thermistors();
static celsius_float_t user_thermistor_to_deg_c(const uint8_t t_index, const int16_t raw);
static inline bool set_pull_up_res(int8_t t_index, float value) {