Patch up some language formatting

This commit is contained in:
Scott Lahteine 2016-11-17 22:17:14 -06:00
parent 8cffa60cc5
commit 6eb6f12c64
11 changed files with 58 additions and 59 deletions

View file

@ -188,7 +188,7 @@
#define MSG_INFO_EXTRUDERS "Extrudery" #define MSG_INFO_EXTRUDERS "Extrudery"
#define MSG_INFO_BAUDRATE "Rychlost" #define MSG_INFO_BAUDRATE "Rychlost"
#define MSG_INFO_PROTOCOL "Protokol" #define MSG_INFO_PROTOCOL "Protokol"
#if LCD_WIDTH > 19 #if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Pocet tisku" #define MSG_INFO_PRINT_COUNT "Pocet tisku"
#define MSG_INFO_COMPLETED_PRINTS "Dokonceno" #define MSG_INFO_COMPLETED_PRINTS "Dokonceno"
#define MSG_INFO_PRINT_TIME "Celkovy cas" #define MSG_INFO_PRINT_TIME "Celkovy cas"

View file

@ -190,7 +190,7 @@
#define MSG_INFO_BAUDRATE "Baud" #define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protocol" #define MSG_INFO_PROTOCOL "Protocol"
#if LCD_WIDTH > 19 #if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Ant. Prints" #define MSG_INFO_PRINT_COUNT "Ant. Prints"
#define MSG_INFO_COMPLETED_PRINTS "Færdige" #define MSG_INFO_COMPLETED_PRINTS "Færdige"
#define MSG_INFO_PRINT_TIME "Total print tid" #define MSG_INFO_PRINT_TIME "Total print tid"

View file

@ -185,7 +185,7 @@
#define MSG_INFO_BAUDRATE "Baud" #define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protokol" #define MSG_INFO_PROTOCOL "Protokol"
#if LCD_WIDTH > 19 #if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Gesamte Drucke" #define MSG_INFO_PRINT_COUNT "Gesamte Drucke"
#define MSG_INFO_COMPLETED_PRINTS "Beendete Drucke" #define MSG_INFO_COMPLETED_PRINTS "Beendete Drucke"
#define MSG_INFO_PRINT_TIME "Gesamte Druckzeit" #define MSG_INFO_PRINT_TIME "Gesamte Druckzeit"

View file

@ -180,7 +180,7 @@
#define MSG_INFO_BAUDRATE "Baud" #define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protocol" #define MSG_INFO_PROTOCOL "Protocol"
#if LCD_WIDTH > 19 #if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Print Count" #define MSG_INFO_PRINT_COUNT "Print Count"
#define MSG_INFO_COMPLETED_PRINTS "Completed " #define MSG_INFO_COMPLETED_PRINTS "Completed "
#define MSG_INFO_PRINT_TIME "Total Time " #define MSG_INFO_PRINT_TIME "Total Time "

View file

@ -488,7 +488,7 @@
#define MSG_INFO_PROTOCOL "Protocol" #define MSG_INFO_PROTOCOL "Protocol"
#endif #endif
#if LCD_WIDTH > 19 #if LCD_WIDTH >= 20
#ifndef MSG_INFO_PRINT_COUNT #ifndef MSG_INFO_PRINT_COUNT
#define MSG_INFO_PRINT_COUNT "Print Count" #define MSG_INFO_PRINT_COUNT "Print Count"
#endif #endif

View file

@ -188,8 +188,7 @@
#define MSG_INFO_BAUDRATE "Baud" #define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protocole" #define MSG_INFO_PROTOCOL "Protocole"
#if LCD_WIDTH >= 20
#if LCD_WIDTH > 19
#define MSG_INFO_PRINT_COUNT "Nbre impressions" #define MSG_INFO_PRINT_COUNT "Nbre impressions"
#define MSG_INFO_COMPLETED_PRINTS "Terminees" #define MSG_INFO_COMPLETED_PRINTS "Terminees"
#define MSG_INFO_PRINT_TIME "Tps impr. total" #define MSG_INFO_PRINT_TIME "Tps impr. total"

View file

@ -182,18 +182,18 @@
#define MSG_INFO_EXTRUDERS "Extrusores" #define MSG_INFO_EXTRUDERS "Extrusores"
#define MSG_INFO_BAUDRATE "Baudios" #define MSG_INFO_BAUDRATE "Baudios"
#define MSG_INFO_PROTOCOL "Protocolo" #define MSG_INFO_PROTOCOL "Protocolo"
#if LCD_WIDTH > 19 #if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Total traballos" #define MSG_INFO_PRINT_COUNT "Total traballos"
#define MSG_INFO_COMPLETED_PRINTS "Total completos" #define MSG_INFO_COMPLETED_PRINTS "Total completos"
#define MSG_INFO_PRINT_TIME "Tempo impresion" #define MSG_INFO_PRINT_TIME "Tempo impresion"
#define MSG_INFO_PRINT_LONGEST "Traballo +longo" #define MSG_INFO_PRINT_LONGEST "Traballo +longo"
#define MSG_INFO_PRINT_FILAMENT "Total extruido" #define MSG_INFO_PRINT_FILAMENT "Total extruido"
#else #else
#define MSG_INFO_PRINT_COUNT "Traballos" #define MSG_INFO_PRINT_COUNT "Traballos"
#define MSG_INFO_COMPLETED_PRINTS "Completos" #define MSG_INFO_COMPLETED_PRINTS "Completos"
#define MSG_INFO_PRINT_TIME "Tempo" #define MSG_INFO_PRINT_TIME "Tempo"
#define MSG_INFO_PRINT_LONGEST "O +longo" #define MSG_INFO_PRINT_LONGEST "O +longo"
#define MSG_INFO_PRINT_FILAMENT "Extruido" #define MSG_INFO_PRINT_FILAMENT "Extruido"
#endif #endif
#define MSG_INFO_MIN_TEMP "Min Temp" #define MSG_INFO_MIN_TEMP "Min Temp"
#define MSG_INFO_MAX_TEMP "Max Temp" #define MSG_INFO_MAX_TEMP "Max Temp"
@ -203,31 +203,31 @@
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extruir mais" #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extruir mais"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Segue traballo" #define MSG_FILAMENT_CHANGE_OPTION_RESUME "Segue traballo"
#if LCD_HEIGHT >= 4 #if LCD_HEIGHT >= 4
#define MSG_FILAMENT_CHANGE_INIT_1 "Agarde para" #define MSG_FILAMENT_CHANGE_INIT_1 "Agarde para"
#define MSG_FILAMENT_CHANGE_INIT_2 "iniciar troco" #define MSG_FILAMENT_CHANGE_INIT_2 "iniciar troco"
#define MSG_FILAMENT_CHANGE_INIT_3 "de filamento" #define MSG_FILAMENT_CHANGE_INIT_3 "de filamento"
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Agarde pola" #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Agarde pola"
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "descarga do" #define MSG_FILAMENT_CHANGE_UNLOAD_2 "descarga do"
#define MSG_FILAMENT_CHANGE_UNLOAD_3 "filamento" #define MSG_FILAMENT_CHANGE_UNLOAD_3 "filamento"
#define MSG_FILAMENT_CHANGE_INSERT_1 "Introduza o" #define MSG_FILAMENT_CHANGE_INSERT_1 "Introduza o"
#define MSG_FILAMENT_CHANGE_INSERT_2 "filamento e" #define MSG_FILAMENT_CHANGE_INSERT_2 "filamento e"
#define MSG_FILAMENT_CHANGE_INSERT_3 "faga click" #define MSG_FILAMENT_CHANGE_INSERT_3 "faga click"
#define MSG_FILAMENT_CHANGE_LOAD_1 "Agarde pola" #define MSG_FILAMENT_CHANGE_LOAD_1 "Agarde pola"
#define MSG_FILAMENT_CHANGE_LOAD_2 "carga do" #define MSG_FILAMENT_CHANGE_LOAD_2 "carga do"
#define MSG_FILAMENT_CHANGE_LOAD_3 "filamento" #define MSG_FILAMENT_CHANGE_LOAD_3 "filamento"
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Agarde pola" #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Agarde pola"
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "extrusion do" #define MSG_FILAMENT_CHANGE_EXTRUDE_2 "extrusion do"
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 "filamento" #define MSG_FILAMENT_CHANGE_EXTRUDE_3 "filamento"
#define MSG_FILAMENT_CHANGE_RESUME_1 "Agarde para" #define MSG_FILAMENT_CHANGE_RESUME_1 "Agarde para"
#define MSG_FILAMENT_CHANGE_RESUME_2 "seguir co" #define MSG_FILAMENT_CHANGE_RESUME_2 "seguir co"
#define MSG_FILAMENT_CHANGE_RESUME_3 "traballo" #define MSG_FILAMENT_CHANGE_RESUME_3 "traballo"
#else // LCD_HEIGHT < 4 #else // LCD_HEIGHT < 4
#define MSG_FILAMENT_CHANGE_INIT_1 "Agarde..." #define MSG_FILAMENT_CHANGE_INIT_1 "Agarde..."
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Descargando..." #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Descargando..."
#define MSG_FILAMENT_CHANGE_INSERT_1 "Introduza e click" #define MSG_FILAMENT_CHANGE_INSERT_1 "Introduza e click"
#define MSG_FILAMENT_CHANGE_LOAD_1 "Cargando..." #define MSG_FILAMENT_CHANGE_LOAD_1 "Cargando..."
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extruindo..." #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extruindo..."
#define MSG_FILAMENT_CHANGE_RESUME_1 "Seguindo..." #define MSG_FILAMENT_CHANGE_RESUME_1 "Seguindo..."
#endif // LCD_HEIGHT < 4 #endif // LCD_HEIGHT < 4
#endif // LANGUAGE_GL_H #endif // LANGUAGE_GL_H

View file

@ -190,7 +190,7 @@
#define MSG_INFO_EXTRUDERS "Estrusori" #define MSG_INFO_EXTRUDERS "Estrusori"
#define MSG_INFO_BAUDRATE "Baud" #define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protocollo" #define MSG_INFO_PROTOCOL "Protocollo"
#if LCD_WIDTH > 19 #if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Contat. stampa" #define MSG_INFO_PRINT_COUNT "Contat. stampa"
#define MSG_INFO_COMPLETED_PRINTS "Completati" #define MSG_INFO_COMPLETED_PRINTS "Completati"
#define MSG_INFO_PRINT_TIME "Tempo totale" #define MSG_INFO_PRINT_TIME "Tempo totale"

View file

@ -89,7 +89,7 @@
#define MSG_MIN LCD_STR_THERMOMETER " \xbb\xb2\xc3\xb2" // " サイテイ" (" Min") #define MSG_MIN LCD_STR_THERMOMETER " \xbb\xb2\xc3\xb2" // " サイテイ" (" Min")
#define MSG_MAX LCD_STR_THERMOMETER " \xbb\xb2\xba\xb3" // " サイコウ" (" Max") #define MSG_MAX LCD_STR_THERMOMETER " \xbb\xb2\xba\xb3" // " サイコウ" (" Max")
#define MSG_FACTOR LCD_STR_THERMOMETER " \xcc\xa7\xb8\xc0\xb0" // " ファクター" (" Fact") #define MSG_FACTOR LCD_STR_THERMOMETER " \xcc\xa7\xb8\xc0\xb0" // " ファクター" (" Fact")
#if LCD_WIDTH > 19 #if LCD_WIDTH >= 20
#define MSG_AUTOTEMP "\xbc\xde\xc4\xde\xb3\xb5\xdd\xc4\xde\xbe\xb2\xb7\xde\xae" // "ジドウオンドセイギョ" ("Autotemp") #define MSG_AUTOTEMP "\xbc\xde\xc4\xde\xb3\xb5\xdd\xc4\xde\xbe\xb2\xb7\xde\xae" // "ジドウオンドセイギョ" ("Autotemp")
#else #else
#define MSG_AUTOTEMP "\xbc\xde\xc4\xde\xb3\xb5\xdd\xc4\xde" // "ジドウオンド" ("Autotemp") #define MSG_AUTOTEMP "\xbc\xde\xc4\xde\xb3\xb5\xdd\xc4\xde" // "ジドウオンド" ("Autotemp")
@ -101,7 +101,7 @@
#define MSG_PID_D "PID-D" #define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C" #define MSG_PID_C "PID-C"
#define MSG_SELECT "\xbe\xdd\xc0\xb8" // "センタク" ("Select") #define MSG_SELECT "\xbe\xdd\xc0\xb8" // "センタク" ("Select")
#if LCD_WIDTH > 19 #if LCD_WIDTH >= 20
#define MSG_ACC "\xb6\xbf\xb8\xc4\xde mm/s2" // "カソクド mm/s2" ("Accel") #define MSG_ACC "\xb6\xbf\xb8\xc4\xde mm/s2" // "カソクド mm/s2" ("Accel")
#define MSG_VX_JERK "X\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // "Xジク ヤクド mm/s" ("Vx-jerk") #define MSG_VX_JERK "X\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // "Xジク ヤクド mm/s" ("Vx-jerk")
#define MSG_VY_JERK "Y\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // "Yジク ヤクド mm/s" ("Vy-jerk") #define MSG_VY_JERK "Y\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // "Yジク ヤクド mm/s" ("Vy-jerk")
@ -132,7 +132,7 @@
#define MSG_MOTION "\xb3\xba\xde\xb7\xbe\xaf\xc3\xb2" // "ウゴキセッテイ" ("Motion") #define MSG_MOTION "\xb3\xba\xde\xb7\xbe\xaf\xc3\xb2" // "ウゴキセッテイ" ("Motion")
#define MSG_VOLUMETRIC "\xcc\xa8\xd7\xd2\xdd\xc4" // "フィラメント" ("Filament") #define MSG_VOLUMETRIC "\xcc\xa8\xd7\xd2\xdd\xc4" // "フィラメント" ("Filament")
#define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_VOLUMETRIC_ENABLED "E in mm3"
#if LCD_WIDTH > 19 #if LCD_WIDTH >= 20
#define MSG_FILAMENT_DIAM "\xcc\xa8\xd7\xd2\xdd\xc4\xc1\xae\xaf\xb9\xb2" // "フィラメントチョッケイ" ("Fil. Dia.") #define MSG_FILAMENT_DIAM "\xcc\xa8\xd7\xd2\xdd\xc4\xc1\xae\xaf\xb9\xb2" // "フィラメントチョッケイ" ("Fil. Dia.")
#else #else
#define MSG_FILAMENT_DIAM "\xcc\xa8\xd7\xd2\xdd\xc4\xb9\xb2" // "フィラメントケイ" ("Fil. Dia.") #define MSG_FILAMENT_DIAM "\xcc\xa8\xd7\xd2\xdd\xc4\xb9\xb2" // "フィラメントケイ" ("Fil. Dia.")
@ -157,7 +157,7 @@
#define MSG_NO_MOVE "\xb3\xba\xde\xb7\xcf\xbe\xdd" // "ウゴキマセン" ("No move.") #define MSG_NO_MOVE "\xb3\xba\xde\xb7\xcf\xbe\xdd" // "ウゴキマセン" ("No move.")
#define MSG_KILLED "\xcb\xbc\xde\xae\xb3\xc3\xb2\xbc" // "ヒジョウテイシ" ("KILLED. ") #define MSG_KILLED "\xcb\xbc\xde\xae\xb3\xc3\xb2\xbc" // "ヒジョウテイシ" ("KILLED. ")
#define MSG_STOPPED "\xc3\xb2\xbc\xbc\xcf\xbc\xc0" // "テイシシマシタ" ("STOPPED. ") #define MSG_STOPPED "\xc3\xb2\xbc\xbc\xcf\xbc\xc0" // "テイシシマシタ" ("STOPPED. ")
#if LCD_WIDTH > 19 #if LCD_WIDTH >= 20
#define MSG_CONTROL_RETRACT "\xcb\xb7\xba\xd0\xd8\xae\xb3 mm" // "ヒキコミリョウ mm" ("Retract mm") #define MSG_CONTROL_RETRACT "\xcb\xb7\xba\xd0\xd8\xae\xb3 mm" // "ヒキコミリョウ mm" ("Retract mm")
#define MSG_CONTROL_RETRACT_SWAP "\xcb\xb7\xba\xd0\xd8\xae\xb3S mm" // "ヒキコミリョウS mm" ("Swap Re.mm") #define MSG_CONTROL_RETRACT_SWAP "\xcb\xb7\xba\xd0\xd8\xae\xb3S mm" // "ヒキコミリョウS mm" ("Swap Re.mm")
#define MSG_CONTROL_RETRACTF "\xcb\xb7\xba\xd0\xbf\xb8\xc4\xde mm/s" // "ヒキコミソクド mm/s" ("Retract V") #define MSG_CONTROL_RETRACTF "\xcb\xb7\xba\xd0\xbf\xb8\xc4\xde mm/s" // "ヒキコミソクド mm/s" ("Retract V")
@ -179,14 +179,14 @@
#define MSG_INIT_SDCARD "SD\xb6\xb0\xc4\xde\xbb\xb2\xd6\xd0\xba\xd0" // "SDカードサイヨミコミ" ("Init. SD card") #define MSG_INIT_SDCARD "SD\xb6\xb0\xc4\xde\xbb\xb2\xd6\xd0\xba\xd0" // "SDカードサイヨミコミ" ("Init. SD card")
#define MSG_CNG_SDCARD "SD\xb6\xb0\xc4\xde\xba\xb3\xb6\xdd" // "SDカードコウカン" ("Change SD card") #define MSG_CNG_SDCARD "SD\xb6\xb0\xc4\xde\xba\xb3\xb6\xdd" // "SDカードコウカン" ("Change SD card")
#define MSG_ZPROBE_OUT "Z\xcc\xdf\xdb\xb0\xcc\xde\x20\xcd\xde\xaf\xc4\xde\xb6\xde\xb2" // "Zプローブ ベッドガイ" ("Z probe out. bed") #define MSG_ZPROBE_OUT "Z\xcc\xdf\xdb\xb0\xcc\xde\x20\xcd\xde\xaf\xc4\xde\xb6\xde\xb2" // "Zプローブ ベッドガイ" ("Z probe out. bed")
#if LCD_WIDTH > 19 #if LCD_WIDTH >= 20
#define MSG_BLTOUCH_SELFTEST "BLTouch \xbc\xde\xba\xbc\xdd\xc0\xde\xdd" // "BLTouch ジコシンダン" ("BLTouch Self-Test") #define MSG_BLTOUCH_SELFTEST "BLTouch \xbc\xde\xba\xbc\xdd\xc0\xde\xdd" // "BLTouch ジコシンダン" ("BLTouch Self-Test")
#else #else
#define MSG_BLTOUCH_SELFTEST "BLTouch \xbe\xd9\xcc\xc3\xbd\xc4" // "BLTouch セルフテスト" ("BLTouch Self-Test") #define MSG_BLTOUCH_SELFTEST "BLTouch \xbe\xd9\xcc\xc3\xbd\xc4" // "BLTouch セルフテスト" ("BLTouch Self-Test")
#endif #endif
#define MSG_BLTOUCH_RESET "BLTouch \xd8\xbe\xaf\xc4" // "BLTouch リセット" ("Reset BLTouch") #define MSG_BLTOUCH_RESET "BLTouch \xd8\xbe\xaf\xc4" // "BLTouch リセット" ("Reset BLTouch")
#define MSG_HOME "\xbb\xb7\xc6" // "サキニ" ("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_HOME "\xbb\xb7\xc6" // "サキニ" ("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#if LCD_WIDTH > 19 #if LCD_WIDTH >= 20
#define MSG_FIRST "\xa6\xcc\xaf\xb7\xbb\xbe\xc3\xb8\xc0\xde\xbb\xb2" // "ヲフッキサセテクダサイ" ("first") #define MSG_FIRST "\xa6\xcc\xaf\xb7\xbb\xbe\xc3\xb8\xc0\xde\xbb\xb2" // "ヲフッキサセテクダサイ" ("first")
#else #else
#define MSG_FIRST "\xa6\xcc\xaf\xb7\xbb\xbe\xd6" // "ヲフッキサセヨ" ("first") #define MSG_FIRST "\xa6\xcc\xaf\xb7\xbb\xbe\xd6" // "ヲフッキサセヨ" ("first")
@ -195,13 +195,13 @@
#define MSG_BABYSTEP_X "X\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Xジク ビドウ" ("Babystep X") #define MSG_BABYSTEP_X "X\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Xジク ビドウ" ("Babystep X")
#define MSG_BABYSTEP_Y "Y\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Yジク ビドウ" ("Babystep Y") #define MSG_BABYSTEP_Y "Y\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Yジク ビドウ" ("Babystep Y")
#define MSG_BABYSTEP_Z "Z\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Zジク ビドウ" ("Babystep Z") #define MSG_BABYSTEP_Z "Z\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Zジク ビドウ" ("Babystep Z")
#if LCD_WIDTH > 19 #if LCD_WIDTH >= 20
#define MSG_ENDSTOP_ABORT "\xb2\xc4\xde\xb3\xb9\xde\xdd\xb6\xb2\xb9\xdd\xc1\xb7\xc9\xb3" // "イドウゲンカイケンチキノウ" ("Endstop abort") #define MSG_ENDSTOP_ABORT "\xb2\xc4\xde\xb3\xb9\xde\xdd\xb6\xb2\xb9\xdd\xc1\xb7\xc9\xb3" // "イドウゲンカイケンチキノウ" ("Endstop abort")
#else #else
#define MSG_ENDSTOP_ABORT "\xb2\xc4\xde\xb3\xb9\xde\xdd\xb6\xb2\xb9\xdd\xc1" // "イドウゲンカイケンチ" ("Endstop abort") #define MSG_ENDSTOP_ABORT "\xb2\xc4\xde\xb3\xb9\xde\xdd\xb6\xb2\xb9\xdd\xc1" // "イドウゲンカイケンチ" ("Endstop abort")
#endif #endif
#define MSG_HEATING_FAILED_LCD "\xb6\xc8\xc2\xbc\xaf\xca\xdf\xb2" // "カネツシッパイ" ("Heating failed") #define MSG_HEATING_FAILED_LCD "\xb6\xc8\xc2\xbc\xaf\xca\xdf\xb2" // "カネツシッパイ" ("Heating failed")
#if LCD_WIDTH > 19 #if LCD_WIDTH >= 20
#define MSG_ERR_REDUNDANT_TEMP "\xb4\xd7\xb0:\xbc\xde\xae\xb3\xc1\xae\xb3\xbb\xb0\xd0\xbd\xc0\xb0\xb7\xc9\xb3" // "エラー:ジョウチョウサーミスターキノウ" ("Err: REDUNDANT TEMP") #define MSG_ERR_REDUNDANT_TEMP "\xb4\xd7\xb0:\xbc\xde\xae\xb3\xc1\xae\xb3\xbb\xb0\xd0\xbd\xc0\xb0\xb7\xc9\xb3" // "エラー:ジョウチョウサーミスターキノウ" ("Err: REDUNDANT TEMP")
#else #else
#define MSG_ERR_REDUNDANT_TEMP "\xb4\xd7\xb0:\xbc\xde\xae\xb3\xc1\xae\xb3\xbb\xb0\xd0\xbd\xc0" // "エラー:ジョウチョウサーミスタ" ("Err: REDUNDANT TEMP") #define MSG_ERR_REDUNDANT_TEMP "\xb4\xd7\xb0:\xbc\xde\xae\xb3\xc1\xae\xb3\xbb\xb0\xd0\xbd\xc0" // "エラー:ジョウチョウサーミスタ" ("Err: REDUNDANT TEMP")
@ -209,7 +209,7 @@
#define MSG_THERMAL_RUNAWAY "\xc8\xc2\xce\xde\xb3\xbf\xb3" // "ネツボウソウ" ("THERMAL RUNAWAY") #define MSG_THERMAL_RUNAWAY "\xc8\xc2\xce\xde\xb3\xbf\xb3" // "ネツボウソウ" ("THERMAL RUNAWAY")
#define MSG_ERR_MAXTEMP "\xb4\xd7\xb0:\xbb\xb2\xba\xb3\xb5\xdd\xc1\xae\xb3\xb6" // "エラー:サイコウオンチョウカ" ("Err: MAXTEMP") #define MSG_ERR_MAXTEMP "\xb4\xd7\xb0:\xbb\xb2\xba\xb3\xb5\xdd\xc1\xae\xb3\xb6" // "エラー:サイコウオンチョウカ" ("Err: MAXTEMP")
#define MSG_ERR_MINTEMP "\xb4\xd7\xb0:\xbb\xb2\xc3\xb2\xb5\xdd\xd0\xcf\xdd" // "エラー:サイテイオンミマン" ("Err: MINTEMP") #define MSG_ERR_MINTEMP "\xb4\xd7\xb0:\xbb\xb2\xc3\xb2\xb5\xdd\xd0\xcf\xdd" // "エラー:サイテイオンミマン" ("Err: MINTEMP")
#if LCD_WIDTH > 19 #if LCD_WIDTH >= 20
#define MSG_ERR_MAXTEMP_BED "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xba\xb3\xb5\xdd\xc1\xae\xb3\xb6" // "エラー:ベッド サイコウオンチョウカ" ("Err: MAXTEMP BED") #define MSG_ERR_MAXTEMP_BED "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xba\xb3\xb5\xdd\xc1\xae\xb3\xb6" // "エラー:ベッド サイコウオンチョウカ" ("Err: MAXTEMP BED")
#define MSG_ERR_MINTEMP_BED "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xc3\xb2\xb5\xdd\xd0\xcf\xdd" // "エラー:ベッド サイテイオンミマン" ("Err: MINTEMP BED") #define MSG_ERR_MINTEMP_BED "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xc3\xb2\xb5\xdd\xd0\xcf\xdd" // "エラー:ベッド サイテイオンミマン" ("Err: MINTEMP BED")
#else #else
@ -243,20 +243,20 @@
#define MSG_INFO_COMPLETED_PRINTS "\xb6\xdd\xd8\xae\xb3\xbd\xb3" // "カンリョウスウ" ("Completed") #define MSG_INFO_COMPLETED_PRINTS "\xb6\xdd\xd8\xae\xb3\xbd\xb3" // "カンリョウスウ" ("Completed")
#define MSG_INFO_PRINT_TIME "\xcc\xdf\xd8\xdd\xc4\xbc\xde\xb6\xdd\xd9\xb2\xb9\xb2" // "プリントジカンルイケイ" ("Total print time") #define MSG_INFO_PRINT_TIME "\xcc\xdf\xd8\xdd\xc4\xbc\xde\xb6\xdd\xd9\xb2\xb9\xb2" // "プリントジカンルイケイ" ("Total print time")
#define MSG_INFO_PRINT_LONGEST "\xbb\xb2\xc1\xae\xb3\xcc\xdf\xd8\xdd\xc4\xbc\xde\xb6\xdd" // "サイチョウプリントジカン" ("Longest job time") #define MSG_INFO_PRINT_LONGEST "\xbb\xb2\xc1\xae\xb3\xcc\xdf\xd8\xdd\xc4\xbc\xde\xb6\xdd" // "サイチョウプリントジカン" ("Longest job time")
#if LCD_WIDTH > 19 #if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_FILAMENT "\xcc\xa8\xd7\xd2\xdd\xc4\xbc\xd6\xb3\xd8\xae\xb3\xd9\xb2\xb9\xb2" // "フィラメントシヨウリョウルイケイ" ("Extruded total") #define MSG_INFO_PRINT_FILAMENT "\xcc\xa8\xd7\xd2\xdd\xc4\xbc\xd6\xb3\xd8\xae\xb3\xd9\xb2\xb9\xb2" // "フィラメントシヨウリョウルイケイ" ("Extruded total")
#else #else
#define MSG_INFO_PRINT_FILAMENT "\xcc\xa8\xd7\xd2\xdd\xc4\xbf\xb3\xbc\xd6\xb3\xd8\xae\xb3" // "フィラメントソウシヨウリョウ" ("Extruded") #define MSG_INFO_PRINT_FILAMENT "\xcc\xa8\xd7\xd2\xdd\xc4\xbf\xb3\xbc\xd6\xb3\xd8\xae\xb3" // "フィラメントソウシヨウリョウ" ("Extruded")
#endif #endif
#define MSG_INFO_MIN_TEMP "\xbe\xaf\xc3\xb2\xbb\xb2\xc3\xb2\xb5\xdd" // "セッテイサイテイオン" ("Min Temp") #define MSG_INFO_MIN_TEMP "\xbe\xaf\xc3\xb2\xbb\xb2\xc3\xb2\xb5\xdd" // "セッテイサイテイオン" ("Min Temp")
#define MSG_INFO_MAX_TEMP "\xbe\xaf\xc3\xb2\xbb\xb2\xba\xb3\xb5\xdd" // "セッテイサイコウオン" ("Max Temp") #define MSG_INFO_MAX_TEMP "\xbe\xaf\xc3\xb2\xbb\xb2\xba\xb3\xb5\xdd" // "セッテイサイコウオン" ("Max Temp")
#if LCD_WIDTH > 19 #if LCD_WIDTH >= 20
#define MSG_INFO_PSU "\xc3\xde\xdd\xb9\xde\xdd\xbc\xad\xcd\xde\xc2" // "デンゲンシュベツ" ("Power Supply") #define MSG_INFO_PSU "\xc3\xde\xdd\xb9\xde\xdd\xbc\xad\xcd\xde\xc2" // "デンゲンシュベツ" ("Power Supply")
#else #else
#define MSG_INFO_PSU "\xc3\xde\xdd\xb9\xde\xdd" // "デンゲン" ("Power Supply") #define MSG_INFO_PSU "\xc3\xde\xdd\xb9\xde\xdd" // "デンゲン" ("Power Supply")
#endif #endif
#define MSG_DRIVE_STRENGTH "\xd3\xb0\xc0\xb0\xb8\xc4\xde\xb3\xd8\xae\xb8" // "モータークドウリョク" ("Drive Strength") #define MSG_DRIVE_STRENGTH "\xd3\xb0\xc0\xb0\xb8\xc4\xde\xb3\xd8\xae\xb8" // "モータークドウリョク" ("Drive Strength")
#if LCD_WIDTH > 19 #if LCD_WIDTH >= 20
#define MSG_DAC_PERCENT "DAC\xbc\xad\xc2\xd8\xae\xb8 %" // "DACシュツリョク %" ("Driver %") #define MSG_DAC_PERCENT "DAC\xbc\xad\xc2\xd8\xae\xb8 %" // "DACシュツリョク %" ("Driver %")
#else #else
#define MSG_DAC_PERCENT "DAC\xbc\xad\xc2\xd8\xae\xb8" // "DACシュツリョク" ("Driver %") #define MSG_DAC_PERCENT "DAC\xbc\xad\xc2\xd8\xae\xb8" // "DACシュツリョク" ("Driver %")
@ -288,7 +288,7 @@
#else // LCD_HEIGHT < 4 #else // LCD_HEIGHT < 4
#define MSG_FILAMENT_CHANGE_INIT_1 "\xba\xb3\xb6\xdd\xa6\xb6\xb2\xbc\xbc\xcf\xbd" // "コウカンヲカイシシマス" ("Please wait...") #define MSG_FILAMENT_CHANGE_INIT_1 "\xba\xb3\xb6\xdd\xa6\xb6\xb2\xbc\xbc\xcf\xbd" // "コウカンヲカイシシマス" ("Please wait...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xc7\xb7\xc0\xde\xbc\xc1\xad\xb3" // "フィラメントヌキダシチュウ" ("Ejecting...") #define MSG_FILAMENT_CHANGE_UNLOAD_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xc7\xb7\xc0\xde\xbc\xc1\xad\xb3" // "フィラメントヌキダシチュウ" ("Ejecting...")
#if LCD_WIDTH > 19 #if LCD_WIDTH >= 20
#define MSG_FILAMENT_CHANGE_INSERT_1 "\xbf\xb3\xc6\xad\xb3\xbc\x2c\xb8\xd8\xaf\xb8\xbc\xc3\xb8\xc0\xde\xbb\xb2" // "ソウニュウシ,クリックシテクダサイ" ("Insert and Click") #define MSG_FILAMENT_CHANGE_INSERT_1 "\xbf\xb3\xc6\xad\xb3\xbc\x2c\xb8\xd8\xaf\xb8\xbc\xc3\xb8\xc0\xde\xbb\xb2" // "ソウニュウシ,クリックシテクダサイ" ("Insert and Click")
#else #else
#define MSG_FILAMENT_CHANGE_INSERT_1 "\xbf\xb3\xc6\xad\xb3\xbc\x2c\xb8\xd8\xaf\xb8\xbe\xd6" // "ソウニュウシ,クリックセヨ" ("Insert and Click") #define MSG_FILAMENT_CHANGE_INSERT_1 "\xbf\xb3\xc6\xad\xb3\xbc\x2c\xb8\xd8\xaf\xb8\xbe\xd6" // "ソウニュウシ,クリックセヨ" ("Insert and Click")

View file

@ -186,7 +186,7 @@
#define MSG_INFO_BAUDRATE "\xddleti\xfeim H\xfdz\xfd" #define MSG_INFO_BAUDRATE "\xddleti\xfeim H\xfdz\xfd"
#define MSG_INFO_PROTOCOL "Protokol" #define MSG_INFO_PROTOCOL "Protokol"
#if LCD_WIDTH > 19 #if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Bask\xfd Say\xfds\xfd" #define MSG_INFO_PRINT_COUNT "Bask\xfd Say\xfds\xfd"
#define MSG_INFO_COMPLETED_PRINTS "Tamamlanan" #define MSG_INFO_COMPLETED_PRINTS "Tamamlanan"
#define MSG_INFO_PRINT_TIME "Toplam Bask\xfd S\xfcresi" #define MSG_INFO_PRINT_TIME "Toplam Bask\xfd S\xfcresi"

View file

@ -721,7 +721,7 @@ static void lcd_implementation_status_screen() {
lcd.print(itostr3(feedrate_percentage)); lcd.print(itostr3(feedrate_percentage));
lcd.print('%'); lcd.print('%');
#if LCD_WIDTH > 19 && ENABLED(SDSUPPORT) #if LCD_WIDTH >= 20 && ENABLED(SDSUPPORT)
lcd.setCursor(7, 2); lcd.setCursor(7, 2);
lcd_printPGM(PSTR("SD")); lcd_printPGM(PSTR("SD"));
@ -731,7 +731,7 @@ static void lcd_implementation_status_screen() {
lcd_printPGM(PSTR("---")); lcd_printPGM(PSTR("---"));
lcd.print('%'); lcd.print('%');
#endif // LCD_WIDTH > 19 && SDSUPPORT #endif // LCD_WIDTH >= 20 && SDSUPPORT
lcd.setCursor(LCD_WIDTH - 6, 2); lcd.setCursor(LCD_WIDTH - 6, 2);
lcd.print(LCD_STR_CLOCK[0]); lcd.print(LCD_STR_CLOCK[0]);