zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping

Browse source 
The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.
This commit is contained in:
etagle 2018-06-03 14:24:23 -03:00 committed by Scott Lahteine
parent 39a7e7720d
commit 6f14bcaa3e
120 changed files with 699 additions and 224 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

3
Marlin/Configuration.h
View file

@ -838,9 +838,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/default/Configuration.h
View file

@ -838,9 +838,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/default/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
View file

@ -858,9 +858,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
View file

@ -838,9 +838,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

3
Marlin/src/config/examples/Anet/A6/Configuration.h
View file

@ -917,9 +917,6 @@
#define INVERT_Y_DIR false #define INVERT_Y_DIR false
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Anet/A6/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Anet/A8/Configuration.h
View file

@ -845,9 +845,6 @@
#define INVERT_Y_DIR false #define INVERT_Y_DIR false
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Anet/A8/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
View file

@ -838,9 +838,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
View file

@ -838,9 +838,6 @@
#define INVERT_Y_DIR false #define INVERT_Y_DIR false
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
View file

@ -838,9 +838,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/BQ/Hephestos/Configuration.h
View file

@ -826,9 +826,6 @@
#define INVERT_Y_DIR false #define INVERT_Y_DIR false
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
View file

@ -839,9 +839,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -843,12 +843,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/BQ/WITBOX/Configuration.h
View file

@ -826,9 +826,6 @@
#define INVERT_Y_DIR false #define INVERT_Y_DIR false
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Cartesio/Configuration.h
View file

@ -837,9 +837,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Cartesio/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Creality/CR-10/Configuration.h
View file

@ -848,9 +848,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Creality/CR-10S/Configuration.h
View file

@ -838,9 +838,6 @@
#define INVERT_Y_DIR false #define INVERT_Y_DIR false
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
View file

@ -857,9 +857,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Creality/CR-8/Configuration.h
View file

@ -848,9 +848,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Creality/Ender-2/Configuration.h
View file

@ -842,9 +842,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Creality/Ender-3/Configuration.h
View file

@ -842,9 +842,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Creality/Ender-4/Configuration.h
View file

@ -848,9 +848,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Felix/Configuration.h
View file

@ -820,9 +820,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Felix/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Felix/DUAL/Configuration.h
View file

@ -820,9 +820,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

3
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
View file

@ -844,9 +844,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
View file

@ -853,9 +853,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

3
Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
View file

@ -838,9 +838,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

3
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
View file

@ -854,9 +854,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

3
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
View file

@ -853,9 +853,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

3
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
View file

@ -838,9 +838,6 @@
#define INVERT_Y_DIR false #define INVERT_Y_DIR false
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
View file

@ -838,9 +838,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
View file

@ -842,9 +842,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/JGAurora/A5/Configuration.h
View file

@ -850,9 +850,6 @@
#define INVERT_Y_DIR false #define INVERT_Y_DIR false
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/MakerParts/Configuration.h
View file

@ -858,9 +858,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/MakerParts/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Malyan/M150/Configuration.h
View file

@ -862,9 +862,6 @@
#define INVERT_Y_DIR false #define INVERT_Y_DIR false
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Malyan/M200/Configuration.h
View file

@ -837,9 +837,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
View file

@ -842,9 +842,6 @@
#define INVERT_Y_DIR false #define INVERT_Y_DIR false
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

3
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
View file

@ -842,9 +842,6 @@
#define INVERT_Y_DIR false #define INVERT_Y_DIR false
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Mks/Sbase/Configuration.h
View file

@ -838,9 +838,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
View file

@ -843,12 +843,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 4 #define MINIMUM_STEPPER_PULSE 4
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
View file

@ -878,9 +878,6 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
#define INVERT_Y_DIR false #define INVERT_Y_DIR false
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

3
Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
View file

@ -838,9 +838,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

3
Marlin/src/config/examples/RigidBot/Configuration.h
View file

@ -836,9 +836,6 @@
#define INVERT_Y_DIR false #define INVERT_Y_DIR false
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/RigidBot/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/SCARA/Configuration.h
View file

@ -851,9 +851,6 @@
#define INVERT_Y_DIR false #define INVERT_Y_DIR false
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/SCARA/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/STM32F10/Configuration.h
View file

@ -840,9 +840,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

3
Marlin/src/config/examples/STM32F4/Configuration.h
View file

@ -838,9 +838,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

3
Marlin/src/config/examples/Sanguinololu/Configuration.h
View file

@ -869,9 +869,6 @@
#define INVERT_Y_DIR false #define INVERT_Y_DIR false
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/TheBorg/Configuration.h
View file

@ -838,9 +838,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/TheBorg/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/TinyBoy2/Configuration.h
View file

@ -889,9 +889,6 @@
#define INVERT_Y_DIR false #define INVERT_Y_DIR false
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba steppers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Tronxy/X1/Configuration.h
View file

@ -838,9 +838,6 @@
#define INVERT_Y_DIR false #define INVERT_Y_DIR false
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

3
Marlin/src/config/examples/Tronxy/X5S/Configuration.h
View file

@ -838,9 +838,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

3
Marlin/src/config/examples/Tronxy/XY100/Configuration.h
View file

@ -849,9 +849,6 @@
#define INVERT_Y_DIR false #define INVERT_Y_DIR false
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

3
Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
View file

@ -838,9 +838,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Velleman/K8200/Configuration.h
View file

@ -867,9 +867,6 @@
#define INVERT_Y_DIR false // K8200: false #define INVERT_Y_DIR false // K8200: false
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
View file

@ -838,12 +838,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Velleman/K8400/Configuration.h
View file

@ -838,9 +838,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
View file

@ -835,12 +835,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
View file

@ -838,9 +838,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

3
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
View file

@ -848,9 +848,6 @@
#define INVERT_Y_DIR false #define INVERT_Y_DIR false
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
View file

@ -837,12 +837,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/adafruit/ST7565/Configuration.h
View file

@ -838,9 +838,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR false
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

3
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
View file

@ -970,9 +970,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
View file

@ -837,12 +837,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
View file

@ -969,9 +969,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
View file

@ -837,12 +837,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

3
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
View file

@ -969,9 +969,6 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false. // For direct drive extruder v9 set to true, for geared extruder set to false.

13
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
View file

@ -837,12 +837,25 @@
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
* 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
* 1 : Minimum for LV8729 stepper drivers
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*/ */
#define MINIMUM_STEPPER_PULSE 2 #define MINIMUM_STEPPER_PULSE 2
/**
* Maximum stepping rate (in Hz) the stepper driver allows
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
* 500000 : Maximum for A4988 stepper driver
* 400000 : Maximum for TMC2xxx stepper drivers
* 250000 : Maximum for DRV8825 stepper driver
* 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver
*/
#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
// Control heater 0 and heater 1 in parallel. // Control heater 0 and heater 1 in parallel.

Some files were not shown because too many files have changed in this diff Show more