Added circle nozzle cleaning parameters to example configurations
This commit is contained in:
parent
6836b94eea
commit
7698c5617a
|
@ -96,7 +96,7 @@
|
|||
//
|
||||
// Marlin now allow you to have a vendor boot image to be displayed on machine
|
||||
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
|
||||
// custom boot image and them the default Marlin boot image is shown.
|
||||
// custom boot image and then the default Marlin boot image is shown.
|
||||
//
|
||||
// We suggest for you to take advantage of this new feature and keep the Marlin
|
||||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
|
@ -1000,6 +1000,10 @@
|
|||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
|
@ -1018,6 +1022,13 @@
|
|||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
// Circular pattern circle fragments number
|
||||
#define NOZZLE_CLEAN_CIRCLE_FN 10
|
||||
// Middle point of circle
|
||||
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
|
||||
|
||||
// Moves the nozzle to the initial position
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
|
|
@ -96,7 +96,7 @@
|
|||
//
|
||||
// Marlin now allow you to have a vendor boot image to be displayed on machine
|
||||
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
|
||||
// custom boot image and them the default Marlin boot image is shown.
|
||||
// custom boot image and then the default Marlin boot image is shown.
|
||||
//
|
||||
// We suggest for you to take advantage of this new feature and keep the Marlin
|
||||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
|
@ -983,6 +983,10 @@
|
|||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
|
@ -1001,6 +1005,13 @@
|
|||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
// Circular pattern circle fragments number
|
||||
#define NOZZLE_CLEAN_CIRCLE_FN 10
|
||||
// Middle point of circle
|
||||
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
|
||||
|
||||
// Moves the nozzle to the initial position
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
|
|
@ -96,7 +96,7 @@
|
|||
//
|
||||
// Marlin now allow you to have a vendor boot image to be displayed on machine
|
||||
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
|
||||
// custom boot image and them the default Marlin boot image is shown.
|
||||
// custom boot image and then the default Marlin boot image is shown.
|
||||
//
|
||||
// We suggest for you to take advantage of this new feature and keep the Marlin
|
||||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
|
@ -983,6 +983,10 @@
|
|||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
|
@ -1001,6 +1005,13 @@
|
|||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
// Circular pattern circle fragments number
|
||||
#define NOZZLE_CLEAN_CIRCLE_FN 10
|
||||
// Middle point of circle
|
||||
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
|
||||
|
||||
// Moves the nozzle to the initial position
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
|
|
@ -96,7 +96,7 @@
|
|||
//
|
||||
// Marlin now allow you to have a vendor boot image to be displayed on machine
|
||||
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
|
||||
// custom boot image and them the default Marlin boot image is shown.
|
||||
// custom boot image and then the default Marlin boot image is shown.
|
||||
//
|
||||
// We suggest for you to take advantage of this new feature and keep the Marlin
|
||||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
|
@ -992,6 +992,10 @@
|
|||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
|
@ -1010,6 +1014,13 @@
|
|||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
// Circular pattern circle fragments number
|
||||
#define NOZZLE_CLEAN_CIRCLE_FN 10
|
||||
// Middle point of circle
|
||||
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
|
||||
|
||||
// Moves the nozzle to the initial position
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
|
|
@ -96,7 +96,7 @@
|
|||
//
|
||||
// Marlin now allow you to have a vendor boot image to be displayed on machine
|
||||
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
|
||||
// custom boot image and them the default Marlin boot image is shown.
|
||||
// custom boot image and then the default Marlin boot image is shown.
|
||||
//
|
||||
// We suggest for you to take advantage of this new feature and keep the Marlin
|
||||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
|
@ -994,6 +994,10 @@
|
|||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
|
@ -1012,6 +1016,13 @@
|
|||
#define NOZZLE_CLEAN_START_POINT { X_MIN_POS + 10, Y_MAX_POS - 9, (Z_MIN_POS + 0.5)}
|
||||
#define NOZZLE_CLEAN_END_POINT { X_MIN_POS + 90, Y_MAX_POS - 0, (Z_MIN_POS + 0.5)}
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
// Circular pattern circle fragments number
|
||||
#define NOZZLE_CLEAN_CIRCLE_FN 10
|
||||
// Middle point of circle
|
||||
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
|
||||
|
||||
// Moves the nozzle to the initial position
|
||||
//#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
|
|
@ -112,7 +112,7 @@
|
|||
//
|
||||
// Marlin now allow you to have a vendor boot image to be displayed on machine
|
||||
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
|
||||
// custom boot image and them the default Marlin boot image is shown.
|
||||
// custom boot image and then the default Marlin boot image is shown.
|
||||
//
|
||||
// We suggest for you to take advantage of this new feature and keep the Marlin
|
||||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
|
@ -1029,6 +1029,10 @@
|
|||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
|
@ -1047,6 +1051,13 @@
|
|||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
// Circular pattern circle fragments number
|
||||
#define NOZZLE_CLEAN_CIRCLE_FN 10
|
||||
// Middle point of circle
|
||||
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
|
||||
|
||||
// Moves the nozzle to the initial position
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
|
|
@ -96,7 +96,7 @@
|
|||
//
|
||||
// Marlin now allow you to have a vendor boot image to be displayed on machine
|
||||
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
|
||||
// custom boot image and them the default Marlin boot image is shown.
|
||||
// custom boot image and then the default Marlin boot image is shown.
|
||||
//
|
||||
// We suggest for you to take advantage of this new feature and keep the Marlin
|
||||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
|
@ -1000,6 +1000,10 @@
|
|||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
|
@ -1018,6 +1022,13 @@
|
|||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
// Circular pattern circle fragments number
|
||||
#define NOZZLE_CLEAN_CIRCLE_FN 10
|
||||
// Middle point of circle
|
||||
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
|
||||
|
||||
// Moves the nozzle to the initial position
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
|
|
@ -96,7 +96,7 @@
|
|||
//
|
||||
// Marlin now allow you to have a vendor boot image to be displayed on machine
|
||||
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
|
||||
// custom boot image and them the default Marlin boot image is shown.
|
||||
// custom boot image and then the default Marlin boot image is shown.
|
||||
//
|
||||
// We suggest for you to take advantage of this new feature and keep the Marlin
|
||||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
|
@ -1000,6 +1000,10 @@
|
|||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
|
@ -1018,6 +1022,13 @@
|
|||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
// Circular pattern circle fragments number
|
||||
#define NOZZLE_CLEAN_CIRCLE_FN 10
|
||||
// Middle point of circle
|
||||
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
|
||||
|
||||
// Moves the nozzle to the initial position
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
|
|
@ -96,7 +96,7 @@
|
|||
//
|
||||
// Marlin now allow you to have a vendor boot image to be displayed on machine
|
||||
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
|
||||
// custom boot image and them the default Marlin boot image is shown.
|
||||
// custom boot image and then the default Marlin boot image is shown.
|
||||
//
|
||||
// We suggest for you to take advantage of this new feature and keep the Marlin
|
||||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
|
@ -1000,6 +1000,10 @@
|
|||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
|
@ -1018,6 +1022,13 @@
|
|||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
// Circular pattern circle fragments number
|
||||
#define NOZZLE_CLEAN_CIRCLE_FN 10
|
||||
// Middle point of circle
|
||||
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
|
||||
|
||||
// Moves the nozzle to the initial position
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
|
|
@ -96,7 +96,7 @@
|
|||
//
|
||||
// Marlin now allow you to have a vendor boot image to be displayed on machine
|
||||
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
|
||||
// custom boot image and them the default Marlin boot image is shown.
|
||||
// custom boot image and then the default Marlin boot image is shown.
|
||||
//
|
||||
// We suggest for you to take advantage of this new feature and keep the Marlin
|
||||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
|
@ -999,6 +999,10 @@
|
|||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
|
@ -1017,6 +1021,13 @@
|
|||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
// Circular pattern circle fragments number
|
||||
#define NOZZLE_CLEAN_CIRCLE_FN 10
|
||||
// Middle point of circle
|
||||
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
|
||||
|
||||
// Moves the nozzle to the initial position
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
|
|
@ -128,7 +128,7 @@
|
|||
//
|
||||
// Marlin now allow you to have a vendor boot image to be displayed on machine
|
||||
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
|
||||
// custom boot image and them the default Marlin boot image is shown.
|
||||
// custom boot image and then the default Marlin boot image is shown.
|
||||
//
|
||||
// We suggest for you to take advantage of this new feature and keep the Marlin
|
||||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
|
@ -1015,6 +1015,10 @@
|
|||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
|
@ -1033,6 +1037,13 @@
|
|||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
// Circular pattern circle fragments number
|
||||
#define NOZZLE_CLEAN_CIRCLE_FN 10
|
||||
// Middle point of circle
|
||||
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
|
||||
|
||||
// Moves the nozzle to the initial position
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
|
|
@ -96,7 +96,7 @@
|
|||
//
|
||||
// Marlin now allow you to have a vendor boot image to be displayed on machine
|
||||
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
|
||||
// custom boot image and them the default Marlin boot image is shown.
|
||||
// custom boot image and then the default Marlin boot image is shown.
|
||||
//
|
||||
// We suggest for you to take advantage of this new feature and keep the Marlin
|
||||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
|
@ -1021,6 +1021,10 @@
|
|||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
|
@ -1039,6 +1043,13 @@
|
|||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
// Circular pattern circle fragments number
|
||||
#define NOZZLE_CLEAN_CIRCLE_FN 10
|
||||
// Middle point of circle
|
||||
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
|
||||
|
||||
// Moves the nozzle to the initial position
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
|
|
@ -96,7 +96,7 @@
|
|||
//
|
||||
// Marlin now allow you to have a vendor boot image to be displayed on machine
|
||||
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
|
||||
// custom boot image and them the default Marlin boot image is shown.
|
||||
// custom boot image and then the default Marlin boot image is shown.
|
||||
//
|
||||
// We suggest for you to take advantage of this new feature and keep the Marlin
|
||||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
|
@ -992,6 +992,10 @@
|
|||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
|
@ -1010,6 +1014,13 @@
|
|||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
// Circular pattern circle fragments number
|
||||
#define NOZZLE_CLEAN_CIRCLE_FN 10
|
||||
// Middle point of circle
|
||||
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
|
||||
|
||||
// Moves the nozzle to the initial position
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
|
|
@ -96,7 +96,7 @@
|
|||
//
|
||||
// Marlin now allow you to have a vendor boot image to be displayed on machine
|
||||
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
|
||||
// custom boot image and them the default Marlin boot image is shown.
|
||||
// custom boot image and then the default Marlin boot image is shown.
|
||||
//
|
||||
// We suggest for you to take advantage of this new feature and keep the Marlin
|
||||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
|
@ -1000,6 +1000,10 @@
|
|||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
|
@ -1018,6 +1022,13 @@
|
|||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
// Circular pattern circle fragments number
|
||||
#define NOZZLE_CLEAN_CIRCLE_FN 10
|
||||
// Middle point of circle
|
||||
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
|
||||
|
||||
// Moves the nozzle to the initial position
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
|
|
@ -96,7 +96,7 @@
|
|||
//
|
||||
// Marlin now allow you to have a vendor boot image to be displayed on machine
|
||||
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
|
||||
// custom boot image and them the default Marlin boot image is shown.
|
||||
// custom boot image and then the default Marlin boot image is shown.
|
||||
//
|
||||
// We suggest for you to take advantage of this new feature and keep the Marlin
|
||||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
|
@ -1087,6 +1087,10 @@
|
|||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
|
@ -1105,6 +1109,13 @@
|
|||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
// Circular pattern circle fragments number
|
||||
#define NOZZLE_CLEAN_CIRCLE_FN 10
|
||||
// Middle point of circle
|
||||
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
|
||||
|
||||
// Moves the nozzle to the initial position
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
|
|
@ -96,7 +96,7 @@
|
|||
//
|
||||
// Marlin now allow you to have a vendor boot image to be displayed on machine
|
||||
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
|
||||
// custom boot image and them the default Marlin boot image is shown.
|
||||
// custom boot image and then the default Marlin boot image is shown.
|
||||
//
|
||||
// We suggest for you to take advantage of this new feature and keep the Marlin
|
||||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
|
@ -1090,6 +1090,10 @@
|
|||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
|
@ -1108,6 +1112,13 @@
|
|||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
// Circular pattern circle fragments number
|
||||
#define NOZZLE_CLEAN_CIRCLE_FN 10
|
||||
// Middle point of circle
|
||||
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
|
||||
|
||||
// Moves the nozzle to the initial position
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
|
|
@ -100,7 +100,7 @@
|
|||
//
|
||||
// Marlin now allow you to have a vendor boot image to be displayed on machine
|
||||
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
|
||||
// custom boot image and them the default Marlin boot image is shown.
|
||||
// custom boot image and then the default Marlin boot image is shown.
|
||||
//
|
||||
// We suggest for you to take advantage of this new feature and keep the Marlin
|
||||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
|
@ -1089,6 +1089,10 @@
|
|||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
|
@ -1107,6 +1111,13 @@
|
|||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
// Circular pattern circle fragments number
|
||||
#define NOZZLE_CLEAN_CIRCLE_FN 10
|
||||
// Middle point of circle
|
||||
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
|
||||
|
||||
// Moves the nozzle to the initial position
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
|
|
@ -89,7 +89,7 @@
|
|||
//
|
||||
// Marlin now allow you to have a vendor boot image to be displayed on machine
|
||||
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
|
||||
// custom boot image and them the default Marlin boot image is shown.
|
||||
// custom boot image and then the default Marlin boot image is shown.
|
||||
//
|
||||
// We suggest for you to take advantage of this new feature and keep the Marlin
|
||||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
|
@ -1093,6 +1093,10 @@
|
|||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
|
@ -1111,6 +1115,13 @@
|
|||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
// Circular pattern circle fragments number
|
||||
#define NOZZLE_CLEAN_CIRCLE_FN 10
|
||||
// Middle point of circle
|
||||
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
|
||||
|
||||
// Moves the nozzle to the initial position
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
|
|
@ -96,7 +96,7 @@
|
|||
//
|
||||
// Marlin now allow you to have a vendor boot image to be displayed on machine
|
||||
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
|
||||
// custom boot image and them the default Marlin boot image is shown.
|
||||
// custom boot image and then the default Marlin boot image is shown.
|
||||
//
|
||||
// We suggest for you to take advantage of this new feature and keep the Marlin
|
||||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
|
@ -1003,6 +1003,10 @@
|
|||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
|
@ -1021,6 +1025,13 @@
|
|||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
// Circular pattern circle fragments number
|
||||
#define NOZZLE_CLEAN_CIRCLE_FN 10
|
||||
// Middle point of circle
|
||||
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
|
||||
|
||||
// Moves the nozzle to the initial position
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
|
|
@ -96,7 +96,7 @@
|
|||
//
|
||||
// Marlin now allow you to have a vendor boot image to be displayed on machine
|
||||
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
|
||||
// custom boot image and them the default Marlin boot image is shown.
|
||||
// custom boot image and then the default Marlin boot image is shown.
|
||||
//
|
||||
// We suggest for you to take advantage of this new feature and keep the Marlin
|
||||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
|
@ -996,6 +996,10 @@
|
|||
// |________|_________|_________|
|
||||
// T1 T2 T3
|
||||
//
|
||||
// P2: This starts a circular pattern with circle with middle in
|
||||
// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S.
|
||||
// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT.
|
||||
//
|
||||
// Caveats: End point Z should use the same value as Start point Z.
|
||||
//
|
||||
// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments
|
||||
|
@ -1014,6 +1018,13 @@
|
|||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
// Circular pattern circle fragments number
|
||||
#define NOZZLE_CLEAN_CIRCLE_FN 10
|
||||
// Middle point of circle
|
||||
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
|
||||
|
||||
// Moves the nozzle to the initial position
|
||||
#define NOZZLE_CLEAN_GOBACK
|
||||
#endif
|
||||
|
|
Loading…
Reference in a new issue