zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

TFT Presets, Generic options, Sanity checks (#19723)

Browse source
This commit is contained in:
Scott Lahteine 2020-10-15 03:00:27 -05:00
parent d81abf1d50
commit 7905aa64fa
116 changed files with 593 additions and 599 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

91
Marlin/Configuration.h
View file

@ -35,7 +35,7 @@
*
* Advanced settings can be found in Configuration_adv.h
*/
#define CONFIGURATION_H_VERSION 020007
#define CONFIGURATION_H_VERSION 020008
//===========================================================================
//============================= Getting Started =============================
@ -2205,22 +2205,83 @@
//=============================================================================
/**
* TFT Type - Select your Display type
*
* Available options are:
* MKS_TS35_V2_0,
* MKS_ROBIN_TFT24, MKS_ROBIN_TFT28, MKS_ROBIN_TFT32, MKS_ROBIN_TFT35,
* MKS_ROBIN_TFT43, MKS_ROBIN_TFT_V1_1R
* TFT_TRONXY_X5SA, ANYCUBIC_TFT35, LONGER_LK_TFT28
* TFT_GENERIC
*
* For TFT_GENERIC, you need to configure these 3 options:
* Driver: TFT_DRIVER
* Current Drivers are: AUTO, ST7735, ST7789, ST7796, R61505, ILI9328, ILI9341, ILI9488
* Resolution: TFT_WIDTH and TFT_HEIGHT
* Interface: TFT_INTERFACE_FSMC or TFT_INTERFACE_SPI
* Specific TFT Model Presets. Enable one of the following options
* or enable TFT_GENERIC and set sub-options.
*/
//
// 480x320, 3.5", SPI Display From MKS
// Normally used in MKS Robin Nano V2
//
//#define MKS_TS35_V2_0
//
// 320x240, 2.4", FSMC Display From MKS
// Normally used in MKS Robin Nano V1.2
//
//#define MKS_ROBIN_TFT24
//
// 320x240, 2.8", FSMC Display From MKS
// Normally used in MKS Robin Nano V1.2
//
//#define MKS_ROBIN_TFT28
//
// 320x240, 3.2", FSMC Display From MKS
// Normally used in MKS Robin Nano V1.2
//
//#define MKS_ROBIN_TFT32
//
// 480x320, 3.5", FSMC Display From MKS
// Normally used in MKS Robin Nano V1.2
//
//#define MKS_ROBIN_TFT35
//
// 480x272, 4.3", FSMC Display From MKS
//
//#define MKS_ROBIN_TFT43
//
// 320x240, 3.2", FSMC Display From MKS
// Normally used in MKS Robin
//
//#define MKS_ROBIN_TFT_V1_1R
//
// 480x320, 3.5", FSMC Stock Display from TronxXY
//
//#define TFT_TRONXY_X5SA
//
// 480x320, 3.5", FSMC Stock Display from AnyCubic
//
//#define ANYCUBIC_TFT35
//
// 320x240, 2.8", FSMC Stock Display from Longer/Alfawise
//
//#define LONGER_LK_TFT28
//
// Generic TFT with detailed options
//
//#define TFT_GENERIC
#if ENABLED(TFT_GENERIC)
// :[ 'AUTO', 'ST7735', 'ST7789', 'ST7796', 'R61505', 'ILI9328', 'ILI9341', 'ILI9488' ]
#define TFT_DRIVER AUTO
// Interface. Enable one of the following options:
//#define TFT_INTERFACE_FSMC
//#define TFT_INTERFACE_SPI
// TFT Resolution. Enable one of the following options:
//#define TFT_RES_320x240
//#define TFT_RES_480x272
//#define TFT_RES_480x320
#endif
/**
* TFT UI - User Interface Selection. Enable one of the following options:

6
Marlin/Configuration_adv.h
View file

@ -30,7 +30,7 @@
*
* Basic settings can be found in Configuration.h
*/
#define CONFIGURATION_ADV_H_VERSION 020007
#define CONFIGURATION_ADV_H_VERSION 020008
//===========================================================================
//============================= Thermal Settings ============================
@ -1048,10 +1048,10 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#if IS_ULTIPANEL
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
#endif

2
Marlin/src/HAL/LPC1768/inc/SanityCheck.h
View file

@ -72,7 +72,7 @@ static_assert(!(NUM_SERVOS && ENABLED(FAST_PWM_FAN)), "BLTOUCH and Servos are in
//#endif
#if MB(RAMPS_14_RE_ARM_EFB, RAMPS_14_RE_ARM_EEB, RAMPS_14_RE_ARM_EFF, RAMPS_14_RE_ARM_EEF, RAMPS_14_RE_ARM_SF)
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI)
#if IS_RRD_FG_SC && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI)
#error "Re-ARM with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER and TMC2130 requires TMC_USE_SW_SPI."
#endif
#endif

6
Marlin/src/HAL/STM32F1/HAL.cpp
View file

@ -130,7 +130,7 @@ const uint8_t adc_pins[] = {
#if ENABLED(FILAMENT_WIDTH_SENSOR)
FILWIDTH_PIN,
#endif
#if ENABLED(ADC_KEYPAD)
#if HAS_ADC_BUTTONS
ADC_KEYPAD_PIN,
#endif
#if HAS_JOY_ADC_X
@ -187,7 +187,7 @@ enum TempPinIndex : char {
#if ENABLED(FILAMENT_WIDTH_SENSOR)
FILWIDTH,
#endif
#if ENABLED(ADC_KEYPAD)
#if HAS_ADC_BUTTONS
ADC_KEY,
#endif
#if HAS_JOY_ADC_X
@ -389,7 +389,7 @@ void HAL_adc_start_conversion(const uint8_t adc_pin) {
#if ENABLED(FILAMENT_WIDTH_SENSOR)
case FILWIDTH_PIN: pin_index = FILWIDTH; break;
#endif
#if ENABLED(ADC_KEYPAD)
#if HAS_ADC_BUTTONS
case ADC_KEYPAD_PIN: pin_index = ADC_KEY; break;
#endif
#if ENABLED(POWER_MONITOR_CURRENT)

4
Marlin/src/core/macros.h
View file

@ -170,7 +170,7 @@
#define _DO_12(W,C,A,V...) (_##W##_1(A) C _DO_11(W,C,V))
#define __DO_N(W,C,N,V...) _DO_##N(W,C,V)
#define _DO_N(W,C,N,V...) __DO_N(W,C,N,V)
#define DO(W,C,V...) _DO_N(W,C,NUM_ARGS(V),V)
#define DO(W,C,V...) (_DO_N(W,C,NUM_ARGS(V),V))
// Macros to support option testing
#define _CAT(a,V...) a##V
@ -186,6 +186,7 @@
#define _DIS_1(O) NOT(_ENA_1(O))
#define ENABLED(V...) DO(ENA,&&,V)
#define DISABLED(V...) DO(DIS,&&,V)
#define COUNT_ENABLED(V...) DO(ENA,+,V)
#define TERN(O,A,B) _TERN(_ENA_1(O),B,A) // OPTION converted to '0' or '1'
#define TERN0(O,A) _TERN(_ENA_1(O),0,A) // OPTION converted to A or '0'
@ -200,6 +201,7 @@
#define ALL(V...) ENABLED(V)
#define BOTH(V1,V2) ALL(V1,V2)
#define EITHER(V1,V2) ANY(V1,V2)
#define MANY(V...) (COUNT_ENABLED(V) > 1)
// Macros to support pins/buttons exist testing
#define PIN_EXISTS(PN) (defined(PN##_PIN) && PN##_PIN >= 0)

2
Marlin/src/feature/bedlevel/ubl/ubl.h
View file

@ -59,7 +59,7 @@ class unified_bed_leveling {
static int g29_grid_size;
#endif
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
static void move_z_with_encoder(const float &multiplier);
static float measure_point_with_encoder();
static float measure_business_card_thickness(float in_height);

256
Marlin/src/inc/Conditionals_LCD.h
View file

@ -46,7 +46,7 @@
*
* DOGLCD : Run a Graphical LCD through U8GLib (with MarlinUI)
* IS_ULTIPANEL : Define LCD_PINS_D5/6/7 for direct-connected "Ultipanel" LCDs
* IS_ULTRA_LCD : Ultra LCD, not necessarily Ultipanel. Used most often with NEWPANEL.
* IS_ULTRA_LCD : Ultra LCD, not necessarily Ultipanel.
* IS_RRD_SC : Common RRD Smart Controller digital interface pins
* IS_RRD_FG_SC : Common RRD Full Graphical Smart Controller digital interface pins
* U8GLIB_ST7920 : Most common DOGM display SPI interface, supporting a "lightweight" display mode.
@ -63,22 +63,21 @@
#elif ENABLED(CARTESIO_UI)
#define DOGLCD
#define IS_ULTIPANEL
#define IS_ULTIPANEL 1
#elif EITHER(DWIN_MARLINUI_PORTRAIT, DWIN_MARLINUI_LANDSCAPE)
#define IS_DWIN_MARLINUI 1
#define IS_ULTIPANEL
#define IS_ULTIPANEL 1
#elif ENABLED(ZONESTAR_LCD)
#define ADC_KEYPAD
#define IS_RRW_KEYPAD
#define HAS_ADC_BUTTONS 1
#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
#define ADC_KEY_NUM 8
#define IS_ULTIPANEL
#define IS_ULTIPANEL 1
// This helps to implement ADC_KEYPAD menus
// This helps to implement HAS_ADC_BUTTONS menus
#define REVERSE_MENU_DIRECTION
#define ENCODER_PULSES_PER_STEP 1
#define ENCODER_STEPS_PER_MENU_ITEM 1
@ -86,29 +85,25 @@
#elif ENABLED(ZONESTAR_12864LCD)
#define DOGLCD
#define IS_RRD_SC
#define IS_RRD_SC 1
#define U8GLIB_ST7920
#elif ENABLED(ZONESTAR_12864OLED)
#define IS_RRD_SC
#define IS_RRD_SC 1
#define U8GLIB_SH1106
#elif ENABLED(ZONESTAR_12864OLED_SSD1306)
#define IS_RRD_SC
#define IS_RRD_SC 1
#define IS_U8GLIB_SSD1306
#elif ENABLED(RADDS_DISPLAY)
#define IS_ULTIPANEL
#define IS_ULTIPANEL 1
#define ENCODER_PULSES_PER_STEP 2
#elif EITHER(ANET_FULL_GRAPHICS_LCD, BQ_LCD_SMART_CONTROLLER)
#define IS_RRD_FG_SC
#elif ANY(miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864)
#define DOGLCD
#define IS_ULTIPANEL
#define IS_ULTIPANEL 1
#if ENABLED(miniVIKI)
#define U8GLIB_ST7565_64128N
@ -123,40 +118,33 @@
#elif ENABLED(OLED_PANEL_TINYBOY2)
#define IS_U8GLIB_SSD1306
#define IS_ULTIPANEL
#define IS_ULTIPANEL 1
#elif ENABLED(RA_CONTROL_PANEL)
#define LCD_I2C_TYPE_PCA8574
#define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
#define IS_ULTIPANEL
#define IS_ULTIPANEL 1
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define DOGLCD
#define U8GLIB_ST7920
#define IS_ULTIPANEL
#elif ENABLED(CR10_STOCKDISPLAY)
#define IS_RRD_FG_SC
#define BOARD_ST7920_DELAY_1 DELAY_NS(125)
#define BOARD_ST7920_DELAY_2 DELAY_NS(125)
#define BOARD_ST7920_DELAY_3 DELAY_NS(125)
#define IS_ULTIPANEL 1
#elif ENABLED(MKS_12864OLED)
#define IS_RRD_SC
#define IS_RRD_SC 1
#define U8GLIB_SH1106
#elif ENABLED(MKS_12864OLED_SSD1306)
#define IS_RRD_SC
#define IS_RRD_SC 1
#define IS_U8GLIB_SSD1306
#elif ENABLED(FYSETC_242_OLED_12864)
#define IS_RRD_SC
#define IS_RRD_SC 1
#define U8GLIB_SH1106
#define LED_CONTROL_MENU
@ -179,7 +167,7 @@
#define FYSETC_MINI_12864
#define DOGLCD
#define IS_ULTIPANEL
#define IS_ULTIPANEL 1
#define LED_COLORS_REDUCE_GREEN
#if ENABLED(PSU_CONTROL) && EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1)
#define LED_BACKLIGHT_TIMEOUT 10000
@ -205,7 +193,7 @@
#elif ENABLED(ULTI_CONTROLLER)
#define IS_ULTIPANEL
#define IS_ULTIPANEL 1
#define U8GLIB_SSD1309
#define LCD_RESET_PIN LCD_PINS_D6 // This controller need a reset pin
#define ENCODER_PULSES_PER_STEP 2
@ -213,14 +201,14 @@
#elif ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602)
#define IS_RRD_SC
#define IS_RRD_SC 1
#define LCD_WIDTH 16
#define LCD_HEIGHT 2
#elif EITHER(TFTGLCD_PANEL_SPI, TFTGLCD_PANEL_I2C)
#define IS_TFTGLCD_PANEL 1
#define IS_ULTIPANEL // Note that IS_ULTIPANEL leads to HAS_WIRED_LCD
#define IS_ULTIPANEL 1 // Note that IS_ULTIPANEL leads to HAS_WIRED_LCD
#if ENABLED(SDSUPPORT) && DISABLED(LCD_PROGRESS_BAR)
#define LCD_PROGRESS_BAR
@ -239,14 +227,35 @@
#define CONVERT_TO_EXT_ASCII // Use extended 128-255 symbols from ASCII table.
// At this time present conversion only for cyrillic - bg, ru and uk languages.
// First 7 ASCII symbols in panel font must be replaced with Marlin's special symbols.
#elif ENABLED(CR10_STOCKDISPLAY)
#define IS_RRD_FG_SC 1
#define BOARD_ST7920_DELAY_1 DELAY_NS(125)
#define BOARD_ST7920_DELAY_2 DELAY_NS(125)
#define BOARD_ST7920_DELAY_3 DELAY_NS(125)
#elif ANY(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, ANET_FULL_GRAPHICS_LCD, BQ_LCD_SMART_CONTROLLER)
#define IS_RRD_FG_SC 1
#elif ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
// RepRapDiscount LCD or Graphical LCD with rotary click encoder
#define IS_RRD_SC 1
#endif
#if ENABLED(IS_RRD_FG_SC)
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
// ST7920-based graphical displays
#if ANY(IS_RRD_FG_SC, LCD_FOR_MELZI, SILVER_GATE_GLCD_CONTROLLER)
#define DOGLCD
#define U8GLIB_ST7920
#define IS_RRD_SC 1
#endif
// ST7565 / 64128N graphical displays
#if EITHER(MAKRPANEL, MINIPANEL)
#define IS_ULTIPANEL
#define IS_ULTIPANEL 1
#define DOGLCD
#if ENABLED(MAKRPANEL)
#define U8GLIB_ST7565_64128N
@ -258,7 +267,7 @@
#endif
#if ENABLED(OVERLORD_OLED)
#define IS_ULTIPANEL
#define IS_ULTIPANEL 1
#define U8GLIB_SH1106
/**
* PCA9632 for buzzer and LEDs via i2c
@ -278,64 +287,44 @@
// 128x64 I2C OLED LCDs - SSD1306/SSD1309/SH1106
#if ANY(U8GLIB_SSD1306, U8GLIB_SSD1309, U8GLIB_SH1106)
#define HAS_U8GLIB_I2C_OLED 1
#endif
#if HAS_U8GLIB_I2C_OLED
#define IS_ULTRA_LCD
#define IS_ULTRA_LCD 1
#define DOGLCD
#endif
// ST7920-based graphical displays
#if ANY(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, LCD_FOR_MELZI, SILVER_GATE_GLCD_CONTROLLER)
#define DOGLCD
#define U8GLIB_ST7920
#define IS_RRD_SC
#endif
// RepRapDiscount LCD or Graphical LCD with rotary click encoder
#if ENABLED(IS_RRD_SC)
#define REPRAP_DISCOUNT_SMART_CONTROLLER
#endif
/**
* SPI Ultipanels
*/
// Basic Ultipanel-like displays
#if ANY(ULTIMAKERCONTROLLER, REPRAP_DISCOUNT_SMART_CONTROLLER, G3D_PANEL, RIGIDBOT_PANEL, PANEL_ONE, U8GLIB_SH1106)
#define IS_ULTIPANEL
#if ANY(ULTIMAKERCONTROLLER, IS_RRD_SC, G3D_PANEL, RIGIDBOT_PANEL, PANEL_ONE, U8GLIB_SH1106)
#define IS_ULTIPANEL 1
#endif
// Einstart OLED has Cardinal nav via pins defined in pins_EINSTART-S.h
#if ENABLED(U8GLIB_SH1106_EINSTART)
#define DOGLCD
#define IS_ULTIPANEL
#define IS_ULTIPANEL 1
#endif
// Compatibility
#if ENABLED(FSMC_GRAPHICAL_TFT)
// TFT Compatibility
#if ANY(FSMC_GRAPHICAL_TFT, SPI_GRAPHICAL_TFT, TFT_320x240, TFT_480x320, TFT_320x240_SPI, TFT_480x320_SPI, TFT_LVGL_UI_FSMC, TFT_LVGL_UI_SPI)
#define IS_LEGACY_TFT 1
#define TFT_GENERIC
#warning "Don't forget to update your TFT settings in Configuration.h."
#endif
#if ANY(FSMC_GRAPHICAL_TFT, TFT_320x240, TFT_480x320, TFT_LVGL_UI_FSMC)
#define TFT_INTERFACE_FSMC
#elif ANY(SPI_GRAPHICAL_TFT, TFT_320x240_SPI, TFT_480x320_SPI, TFT_LVGL_UI_SPI)
#define TFT_INTERFACE_SPI
#endif
#if EITHER(FSMC_GRAPHICAL_TFT, SPI_GRAPHICAL_TFT)
#define TFT_CLASSIC_UI
#define TFT_INTERFACE_FSMC
#define TFT_GENERIC
#elif ENABLED(SPI_GRAPHICAL_TFT)
#define TFT_CLASSIC_UI
#define TFT_INTERFACE_SPI
#define TFT_GENERIC
#elif EITHER(TFT_320x240, TFT_480x320)
#elif ANY(TFT_320x240, TFT_480x320, TFT_320x240_SPI, TFT_480x320_SPI)
#define TFT_COLOR_UI
#define TFT_INTERFACE_FSMC
#define TFT_GENERIC
#elif EITHER(TFT_320x240_SPI, TFT_480x320_SPI)
#define TFT_COLOR_UI
#define TFT_INTERFACE_SPI
#define TFT_GENERIC
#elif ENABLED(TFT_LVGL_UI_FSMC)
#elif EITHER(TFT_LVGL_UI_FSMC, TFT_LVGL_UI_SPI)
#define TFT_LVGL_UI
#define TFT_INTERFACE_FSMC
#define TFT_GENERIC
#elif ENABLED(TFT_LVGL_UI_SPI)
#define TFT_LVGL_UI
#define TFT_INTERFACE_SPI
#define TFT_GENERIC
#endif
// FSMC/SPI TFT Panels (LVGL)
@ -350,7 +339,7 @@
#if TFT_SCALED_DOGLCD
#define DOGLCD
#define IS_ULTIPANEL
#define IS_ULTIPANEL 1
#define DELAYED_BACKLIGHT_INIT
#elif ENABLED(TFT_LVGL_UI)
#define DELAYED_BACKLIGHT_INIT
@ -359,7 +348,7 @@
// Color UI
#if ENABLED(TFT_COLOR_UI)
#define HAS_GRAPHICAL_TFT 1
#define IS_ULTIPANEL
#define IS_ULTIPANEL 1
#endif
/**
@ -383,7 +372,7 @@
#define LCD_I2C_TYPE_MCP23017
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
#define LCD_USE_I2C_BUZZER // Enable buzzer on LCD (optional)
#define IS_ULTIPANEL
#define IS_ULTIPANEL 1
#elif ENABLED(LCD_I2C_VIKI)
@ -398,7 +387,7 @@
#define LCD_I2C_TYPE_MCP23017
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
#define LCD_USE_I2C_BUZZER // Enable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later)
#define IS_ULTIPANEL
#define IS_ULTIPANEL 1
#define ENCODER_FEEDRATE_DEADZONE 4
@ -410,7 +399,7 @@
#define STD_ENCODER_PULSES_PER_STEP 2
#define STD_ENCODER_STEPS_PER_MENU_ITEM 1
#elif ANY(REPRAP_DISCOUNT_SMART_CONTROLLER, miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864, OLED_PANEL_TINYBOY2, BQ_LCD_SMART_CONTROLLER, LCD_I2C_PANELOLU2)
#elif ANY(IS_RRD_SC, miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864, OLED_PANEL_TINYBOY2, BQ_LCD_SMART_CONTROLLER, LCD_I2C_PANELOLU2)
#define STD_ENCODER_PULSES_PER_STEP 4
#define STD_ENCODER_STEPS_PER_MENU_ITEM 1
@ -443,30 +432,24 @@
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
#if ENABLED(FF_INTERFACEBOARD)
#define SR_LCD_3W_NL // Non latching 3 wire shift register
#define IS_ULTIPANEL
#define IS_ULTIPANEL 1
#elif ENABLED(SAV_3DLCD)
#define SR_LCD_2W_NL // Non latching 2 wire shift register
#define IS_ULTIPANEL
#define IS_ULTIPANEL 1
#elif ENABLED(ULTIPANEL)
#define IS_ULTIPANEL 1
#endif
#if ENABLED(IS_ULTIPANEL)
#define ULTIPANEL
#endif
#if ENABLED(ULTIPANEL)
#define IS_ULTRA_LCD
#define NEWPANEL
#endif
#if ENABLED(IS_ULTRA_LCD)
#define ULTRA_LCD
#if EITHER(IS_ULTIPANEL, ULTRA_LCD)
#define IS_ULTRA_LCD 1
#endif
#if ENABLED(IS_RRW_KEYPAD)
#define REPRAPWORLD_KEYPAD
#if EITHER(IS_ULTIPANEL, REPRAPWORLD_KEYPAD)
#define IS_NEWPANEL 1
#endif
// Keypad needs a move step
#if ENABLED(REPRAPWORLD_KEYPAD)
#define NEWPANEL
#if EITHER(ZONESTAR_LCD, REPRAPWORLD_KEYPAD)
#define IS_RRW_KEYPAD 1
#ifndef REPRAPWORLD_KEYPAD_MOVE_STEP
#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0
#endif
@ -479,16 +462,16 @@
// Extensible UI serial touch screens. (See src/lcd/extui)
#if ANY(HAS_DGUS_LCD, MALYAN_LCD, TOUCH_UI_FTDI_EVE, ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON)
#define IS_EXTUI
#define IS_EXTUI 1
#define EXTENSIBLE_UI
#endif
// Aliases for LCD features
#if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
#if EITHER(IS_ULTRA_LCD, EXTENSIBLE_UI)
#define HAS_DISPLAY 1
#endif
#if ENABLED(ULTRA_LCD)
#if IS_ULTRA_LCD
#define HAS_WIRED_LCD 1
#if ENABLED(DOGLCD)
#define HAS_MARLINUI_U8GLIB 1
@ -499,12 +482,9 @@
#endif
#endif
#if ENABLED(ULTIPANEL) && DISABLED(NO_LCD_MENUS)
#if IS_ULTIPANEL && DISABLED(NO_LCD_MENUS)
#define HAS_LCD_MENU 1
#endif
#if ENABLED(ADC_KEYPAD)
#define HAS_ADC_BUTTONS 1
#endif
#if HAS_MARLINUI_U8GLIB
#ifndef LCD_PIXEL_WIDTH
@ -837,83 +817,85 @@
#if ENABLED(MKS_TS35_V2_0)
// Most common: ST7796
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY)
#define TFT_WIDTH 480
#define TFT_HEIGHT 320
#define TFT_RES_480x320
#define TFT_INTERFACE_SPI
#define GRAPHICAL_TFT_UPSCALE 3
#elif ENABLED(MKS_ROBIN_TFT24)
// Most common: ST7789
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y)
#define TFT_WIDTH 320
#define TFT_HEIGHT 240
#define TFT_RES_320x240
#define TFT_INTERFACE_FSMC
#define GRAPHICAL_TFT_UPSCALE 2
#elif ENABLED(MKS_ROBIN_TFT28)
// Most common: ST7789
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y)
#define TFT_WIDTH 320
#define TFT_HEIGHT 240
#define TFT_RES_320x240
#define TFT_INTERFACE_FSMC
#define GRAPHICAL_TFT_UPSCALE 2
#elif ENABLED(MKS_ROBIN_TFT32)
// Most common: ST7789
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y)
#define TFT_WIDTH 320
#define TFT_HEIGHT 240
#define TFT_RES_320x240
#define TFT_INTERFACE_FSMC
#define GRAPHICAL_TFT_UPSCALE 2
#elif ENABLED(MKS_ROBIN_TFT35)
// Most common: ILI9488
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y)
#define TFT_WIDTH 480
#define TFT_HEIGHT 320
#define TFT_RES_480x320
#define TFT_INTERFACE_FSMC
#define GRAPHICAL_TFT_UPSCALE 3
#elif ENABLED(MKS_ROBIN_TFT43)
#define TFT_DEFAULT_ORIENTATION 0
#define TFT_DRIVER SSD1963
#define TFT_WIDTH 480
#define TFT_HEIGHT 272
#define TFT_RES_480x272
#define TFT_INTERFACE_FSMC
#define GRAPHICAL_TFT_UPSCALE 2
#elif ENABLED(MKS_ROBIN_TFT_V1_1R)
// ILI9328 or R61505
#define TFT_DEFAULT_ORIENTATION (TFT_INVERT_X | TFT_INVERT_Y | TFT_EXCHANGE_XY)
#define TFT_WIDTH 320
#define TFT_HEIGHT 240
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y)
#define TFT_RES_320x240
#define TFT_INTERFACE_FSMC
#define GRAPHICAL_TFT_UPSCALE 2
#elif EITHER(TFT_TRONXY_X5SA, ANYCUBIC_TFT35)
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y)
#define TFT_DRIVER ILI9488
#define TFT_WIDTH 480
#define TFT_HEIGHT 320
#define TFT_RES_480x320
#define TFT_INTERFACE_FSMC
#define GRAPHICAL_TFT_UPSCALE 3
#elif ENABLED(LONGER_LK_TFT28)
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y)
#define TFT_WIDTH 320
#define TFT_HEIGHT 240
#define TFT_RES_320x240
#define TFT_INTERFACE_FSMC
#define GRAPHICAL_TFT_UPSCALE 2
#elif ENABLED(TFT_GENERIC)
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y)
#if NONE(TFT_RES_320x240, TFT_RES_480x272, TFT_RES_480x320)
#define TFT_RES_320x240
#endif
#if NONE(TFT_INTERFACE_FSMC, TFT_INTERFACE_SPI)
#define TFT_INTERFACE_SPI
#endif
#endif
#if ENABLED(TFT_RES_320x240)
#define TFT_WIDTH 320
#define TFT_HEIGHT 240
#define GRAPHICAL_TFT_UPSCALE 2
#elif ENABLED(TFT_RES_480x272)
#define TFT_WIDTH 480
#define TFT_HEIGHT 272
#define GRAPHICAL_TFT_UPSCALE 2
#elif ENABLED(TFT_RES_480x320)
#define TFT_WIDTH 480
#define TFT_HEIGHT 320
#define GRAPHICAL_TFT_UPSCALE 3
#endif
// FSMC/SPI TFT Panels using standard HAL/tft/tft_(fsmc|spi).h
#if ENABLED(TFT_INTERFACE_FSMC)
#define HAS_FSMC_TFT 1
#if ENABLED(TFT_CLASSIC_UI)
#define FSMC_GRAPHICAL_TFT
#define HAS_FSMC_GRAPHICAL_TFT 1
#elif ENABLED(TFT_LVGL_UI)
#define TFT_LVGL_UI_FSMC
#define HAS_TFT_LVGL_UI_FSMC 1
#endif
#elif ENABLED(TFT_INTERFACE_SPI)
#define HAS_SPI_TFT 1
#if ENABLED(TFT_CLASSIC_UI)
#define SPI_GRAPHICAL_TFT
#define HAS_SPI_GRAPHICAL_TFT 1
#elif ENABLED(TFT_LVGL_UI)
#define TFT_LVGL_UI_SPI
#define HAS_TFT_LVGL_UI_SPI 1
#endif
#endif

4
Marlin/src/inc/Conditionals_adv.h
View file

@ -148,7 +148,7 @@
#if ANY(MARLIN_BRICKOUT, MARLIN_INVADERS, MARLIN_SNAKE, MARLIN_MAZE)
#define HAS_GAMES 1
#if (1 < ENABLED(MARLIN_BRICKOUT) + ENABLED(MARLIN_INVADERS) + ENABLED(MARLIN_SNAKE) + ENABLED(MARLIN_MAZE))
#if MANY(MARLIN_BRICKOUT, MARLIN_INVADERS, MARLIN_SNAKE, MARLIN_MAZE)
#define HAS_GAME_MENU 1
#endif
#endif
@ -163,7 +163,7 @@
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
#define HAS_SOFTWARE_ENDSTOPS 1
#endif
#if ANY(EXTENSIBLE_UI, NEWPANEL, EMERGENCY_PARSER, HAS_ADC_BUTTONS, DWIN_CREALITY_LCD)
#if ANY(EXTENSIBLE_UI, IS_NEWPANEL, EMERGENCY_PARSER, HAS_ADC_BUTTONS, DWIN_CREALITY_LCD)
#define HAS_RESUME_CONTINUE 1
#endif

4
Marlin/src/inc/Conditionals_post.h
View file

@ -383,7 +383,7 @@
#endif
#if ANY(HAS_GRAPHICAL_TFT, LCD_USE_DMA_FSMC, FSMC_GRAPHICAL_TFT, SPI_GRAPHICAL_TFT) || !PIN_EXISTS(SD_DETECT)
#if ANY(HAS_GRAPHICAL_TFT, LCD_USE_DMA_FSMC, HAS_FSMC_GRAPHICAL_TFT, HAS_SPI_GRAPHICAL_TFT) || !PIN_EXISTS(SD_DETECT)
#define NO_LCD_REINIT 1 // Suppress LCD re-initialization
#endif
@ -2578,7 +2578,7 @@
// Force SDCARD_SORT_ALPHA to be enabled for Graphical LCD on LPC1768
// on boards where SD card and LCD display share the same SPI bus
// because of a bug in the shared SPI implementation. (See #8122)
#if defined(TARGET_LPC1768) && ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && (SCK_PIN == LCD_PINS_D4)
#if defined(TARGET_LPC1768) && IS_RRD_FG_SC && (SCK_PIN == LCD_PINS_D4)
#define SDCARD_SORT_ALPHA // Keep one directory level in RAM. Changing directory levels
// may still glitch the screen, but LCD updates clean it up.
#undef SDSORT_LIMIT

199
Marlin/src/inc/SanityCheck.h
View file

@ -702,8 +702,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#elif PROGRESS_MSG_EXPIRE < 0
#error "PROGRESS_MSG_EXPIRE must be greater than or equal to 0."
#endif
#elif ENABLED(LCD_SET_PROGRESS_MANUALLY) && NONE(HAS_MARLINUI_U8GLIB, HAS_GRAPHICAL_TFT, HAS_MARLINUI_HD44780, EXTENSIBLE_UI)
#error "LCD_SET_PROGRESS_MANUALLY requires LCD_PROGRESS_BAR, Character LCD, Graphical LCD, TFT, or EXTENSIBLE_UI."
#elif ENABLED(LCD_SET_PROGRESS_MANUALLY)
#if NONE(HAS_MARLINUI_U8GLIB, HAS_GRAPHICAL_TFT, HAS_MARLINUI_HD44780, EXTENSIBLE_UI)
#error "LCD_SET_PROGRESS_MANUALLY requires LCD_PROGRESS_BAR, Character LCD, Graphical LCD, TFT, or EXTENSIBLE_UI."
#endif
#endif
#if !HAS_LCD_MENU && ENABLED(SD_REPRINT_LAST_SELECTED_FILE)
@ -843,7 +845,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#error "ADVANCED_PAUSE_FEATURE requires FILAMENT_UNLOAD_PURGE_FEEDRATE. Please add it to Configuration_adv.h."
#elif ENABLED(EXTRUDER_RUNOUT_PREVENT)
#error "EXTRUDER_RUNOUT_PREVENT is incompatible with ADVANCED_PAUSE_FEATURE."
#elif ENABLED(PARK_HEAD_ON_PAUSE) && NONE(SDSUPPORT, NEWPANEL, EMERGENCY_PARSER)
#elif ENABLED(PARK_HEAD_ON_PAUSE) && NONE(SDSUPPORT, IS_NEWPANEL, EMERGENCY_PARSER)
#error "PARK_HEAD_ON_PAUSE requires SDSUPPORT, EMERGENCY_PARSER, or an LCD controller."
#elif ENABLED(HOME_BEFORE_FILAMENT_CHANGE) && DISABLED(PAUSE_PARK_NO_STEPPER_TIMEOUT)
#error "HOME_BEFORE_FILAMENT_CHANGE requires PAUSE_PARK_NO_STEPPER_TIMEOUT."
@ -1026,15 +1028,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
/**
* Special tool-changing options
*/
#if 1 < 0 \
+ ENABLED(SINGLENOZZLE) \
+ ENABLED(DUAL_X_CARRIAGE) \
+ ENABLED(PARKING_EXTRUDER) \
+ ENABLED(MAGNETIC_PARKING_EXTRUDER) \
+ ENABLED(SWITCHING_TOOLHEAD) \
+ ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) \
+ ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#error "Please select only one of SINGLENOZZLE, DUAL_X_CARRIAGE, PARKING_EXTRUDER, SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, or ELECTROMAGNETIC_SWITCHING_TOOLHEAD."
#if MANY(SINGLENOZZLE, DUAL_X_CARRIAGE, PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER, SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#error "Please select only one of SINGLENOZZLE, DUAL_X_CARRIAGE, PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER, SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, or ELECTROMAGNETIC_SWITCHING_TOOLHEAD."
#endif
/**
@ -1161,16 +1156,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
/**
* Allow only one kinematic type to be defined
*/
#if 1 < 0 \
+ ENABLED(DELTA) \
+ ENABLED(MORGAN_SCARA) \
+ ENABLED(COREXY) \
+ ENABLED(COREXZ) \
+ ENABLED(COREYZ) \
+ ENABLED(COREYX) \
+ ENABLED(COREZX) \
+ ENABLED(COREZY) \
+ ENABLED(MARKFORGED_XY)
#if MANY(DELTA, MORGAN_SCARA, COREXY, COREXZ, COREYZ, COREYX, COREZX, COREZY, MARKFORGED_XY)
#error "Please enable only one of DELTA, MORGAN_SCARA, COREXY, COREYX, COREXZ, COREZX, COREYZ, COREZY, or MARKFORGED_XY."
#endif
@ -1210,18 +1196,9 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
* Allow only one probe option to be defined
*/
#if 1 < 0 \
+ ENABLED(PROBE_MANUALLY) \
+ ENABLED(FIX_MOUNTED_PROBE) \
+ ENABLED(NOZZLE_AS_PROBE) \
+ (HAS_Z_SERVO_PROBE && DISABLED(BLTOUCH)) \
+ ENABLED(BLTOUCH) && DISABLED(CREALITY_TOUCH) \
+ ENABLED(CREALITY_TOUCH) \
+ ENABLED(TOUCH_MI_PROBE) \
+ ENABLED(SOLENOID_PROBE) \
+ ENABLED(Z_PROBE_ALLEN_KEY) \
+ ENABLED(Z_PROBE_SLED) \
+ ENABLED(RACK_AND_PINION_PROBE) \
+ ENABLED(SENSORLESS_PROBING)
+ (DISABLED(BLTOUCH) && HAS_Z_SERVO_PROBE) \
+ (ENABLED(BLTOUCH) && DISABLED(CREALITY_TOUCH)) \
+ COUNT_ENABLED(PROBE_MANUALLY, FIX_MOUNTED_PROBE, NOZZLE_AS_PROBE, CREALITY_TOUCH, TOUCH_MI_PROBE, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, RACK_AND_PINION_PROBE, SENSORLESS_PROBING)
#error "Please enable only one probe option: PROBE_MANUALLY, SENSORLESS_PROBING, BLTOUCH, FIX_MOUNTED_PROBE, NOZZLE_AS_PROBE, TOUCH_MI_PROBE, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo."
#endif
@ -1391,12 +1368,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
/**
* Allow only one bed leveling option to be defined
*/
#if 1 < 0 \
+ ENABLED(AUTO_BED_LEVELING_LINEAR) \
+ ENABLED(AUTO_BED_LEVELING_3POINT) \
+ ENABLED(AUTO_BED_LEVELING_BILINEAR) \
+ ENABLED(AUTO_BED_LEVELING_UBL) \
+ ENABLED(MESH_BED_LEVELING)
#if MANY(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL, MESH_BED_LEVELING)
#error "Select only one of: MESH_BED_LEVELING, AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL."
#endif
@ -1558,8 +1530,8 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
/**
* ULTIPANEL encoder
*/
#if ENABLED(ULTIPANEL) && NONE(NEWPANEL, SR_LCD_2W_NL) && !defined(SHIFT_CLK)
#error "ULTIPANEL requires some kind of encoder."
#if IS_ULTIPANEL && NONE(IS_NEWPANEL, SR_LCD_2W_NL) && !defined(SHIFT_CLK)
#error "ULTIPANEL controllers require some kind of encoder."
#endif
#if ENCODER_PULSES_PER_STEP < 0
@ -2237,89 +2209,100 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
* Make sure only one display is enabled
*/
#if 1 < 0 \
+ (ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && DISABLED(IS_RRD_SC)) \
+ (ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && DISABLED(IS_RRD_FG_SC)) \
+ (ENABLED(ULTRA_LCD) && DISABLED(IS_ULTRA_LCD)) \
+ ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) \
+ ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) \
+ ENABLED(ULTIPANEL) \
+ ENABLED(ULTRA_LCD) \
+ (ENABLED(U8GLIB_SSD1306) && DISABLED(IS_U8GLIB_SSD1306)) \
+ (ENABLED(MINIPANEL) && NONE(MKS_MINI_12864, ENDER2_STOCKDISPLAY)) \
+ (ENABLED(MKS_MINI_12864) && DISABLED(MKS_LCD12864)) \
+ (ENABLED(EXTENSIBLE_UI) && DISABLED(IS_EXTUI)) \
+ (ENABLED(ULTIPANEL) && DISABLED(IS_ULTIPANEL)) \
+ ENABLED(RADDS_DISPLAY) \
+ ENABLED(ULTIMAKERCONTROLLER) \
+ ENABLED(PANEL_ONE) \
+ ENABLED(G3D_PANEL) \
+ ENABLED(RIGIDBOT_PANEL) \
+ ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602) \
+ ENABLED(ZONESTAR_LCD) \
+ ENABLED(RA_CONTROL_PANEL) \
+ ENABLED(LCD_SAINSMART_I2C_1602) \
+ ENABLED(LCD_SAINSMART_I2C_2004) \
+ ENABLED(LCM1602) \
+ ENABLED(LCD_I2C_PANELOLU2) \
+ ENABLED(LCD_I2C_VIKI) \
+ ENABLED(SAV_3DLCD) \
+ ENABLED(FF_INTERFACEBOARD) \
+ ENABLED(REPRAPWORLD_GRAPHICAL_LCD) \
+ ENABLED(VIKI2) \
+ ENABLED(miniVIKI) \
+ ENABLED(MAKRPANEL) \
+ ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
+ ENABLED(BQ_LCD_SMART_CONTROLLER) \
+ ENABLED(CARTESIO_UI) \
+ ENABLED(LCD_FOR_MELZI) \
+ ENABLED(ULTI_CONTROLLER) \
+ ENABLED(MKS_LCD12864) \
+ ENABLED(ENDER2_STOCKDISPLAY) \
+ ENABLED(FYSETC_MINI_12864_X_X) \
+ ENABLED(FYSETC_MINI_12864_1_2) \
+ ENABLED(FYSETC_MINI_12864_2_0) \
+ ENABLED(FYSETC_MINI_12864_2_1) \
+ ENABLED(FYSETC_GENERIC_12864_1_1) \
+ ENABLED(CR10_STOCKDISPLAY) \
+ ENABLED(DWIN_CREALITY_LCD) \
+ (DISABLED(IS_LEGACY_TFT) && ENABLED(TFT_GENERIC)) \
+ (ENABLED(IS_LEGACY_TFT) && COUNT_ENABLED(TFT_320x240, TFT_320x240_SPI, TFT_480x320, TFT_480x320_SPI)) \
+ COUNT_ENABLED(ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON, ANYCUBIC_TFT35) \
+ COUNT_ENABLED(DGUS_LCD_UI_ORIGIN, DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) \
+ COUNT_ENABLED(ENDER2_STOCKDISPLAY, CR10_STOCKDISPLAY, DWIN_CREALITY_LCD) \
+ COUNT_ENABLED(FYSETC_MINI_12864_X_X, FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1, FYSETC_GENERIC_12864_1_1) \
+ COUNT_ENABLED(LCD_SAINSMART_I2C_1602, LCD_SAINSMART_I2C_2004) \
+ COUNT_ENABLED(MKS_12864OLED, MKS_12864OLED_SSD1306) \
+ COUNT_ENABLED(MKS_TS35_V2_0, MKS_ROBIN_TFT24, MKS_ROBIN_TFT28, MKS_ROBIN_TFT32, MKS_ROBIN_TFT35, MKS_ROBIN_TFT43, MKS_ROBIN_TFT_V1_1R) \
+ COUNT_ENABLED(TFTGLCD_PANEL_SPI, TFTGLCD_PANEL_I2C) \
+ COUNT_ENABLED(VIKI2, miniVIKI) \
+ COUNT_ENABLED(ZONESTAR_12864LCD, ZONESTAR_12864OLED, ZONESTAR_12864OLED_SSD1306) \
+ ENABLED(ANET_FULL_GRAPHICS_LCD) \
+ ENABLED(AZSMZ_12864) \
+ ENABLED(SILVER_GATE_GLCD_CONTROLLER) \
+ ENABLED(SAV_3DGLCD) \
+ ENABLED(OLED_PANEL_TINYBOY2) \
+ ENABLED(MKS_12864OLED) \
+ ENABLED(MKS_12864OLED_SSD1306) \
+ ENABLED(ZONESTAR_12864LCD) \
+ ENABLED(ZONESTAR_12864OLED) \
+ ENABLED(ZONESTAR_12864OLED_SSD1306) \
+ ENABLED(U8GLIB_SH1106_EINSTART) \
+ ENABLED(OVERLORD_OLED) \
+ ENABLED(BQ_LCD_SMART_CONTROLLER) \
+ ENABLED(CARTESIO_UI) \
+ ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
+ ENABLED(FF_INTERFACEBOARD) \
+ ENABLED(FYSETC_242_OLED_12864) \
+ ENABLED(DGUS_LCD_UI_ORIGIN) \
+ ENABLED(DGUS_LCD_UI_FYSETC) \
+ ENABLED(DGUS_LCD_UI_HIPRECY) \
+ ENABLED(G3D_PANEL) \
+ ENABLED(LCD_FOR_MELZI) \
+ ENABLED(LCD_I2C_PANELOLU2) \
+ ENABLED(LCD_I2C_VIKI) \
+ ENABLED(LCM1602) \
+ ENABLED(LONGER_LK_TFT28) \
+ ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602) \
+ ENABLED(MAKRPANEL) \
+ ENABLED(MALYAN_LCD) \
+ ENABLED(MKS_LCD12864) \
+ ENABLED(OLED_PANEL_TINYBOY2) \
+ ENABLED(OVERLORD_OLED) \
+ ENABLED(PANEL_ONE) \
+ ENABLED(RA_CONTROL_PANEL) \
+ ENABLED(RADDS_DISPLAY) \
+ ENABLED(REPRAPWORLD_GRAPHICAL_LCD) \
+ ENABLED(RIGIDBOT_PANEL) \
+ ENABLED(SAV_3DGLCD) \
+ ENABLED(SAV_3DLCD) \
+ ENABLED(SILVER_GATE_GLCD_CONTROLLER) \
+ ENABLED(TFT_TRONXY_X5SA) \
+ ENABLED(TOUCH_UI_FTDI_EVE) \
+ ENABLED(TFT_320x240) \
+ ENABLED(TFT_320x240_SPI) \
+ ENABLED(FSMC_GRAPHICAL_TFT) \
+ ENABLED(TFT_LVGL_UI_FSMC) \
+ ENABLED(TFT_LVGL_UI_SPI) \
+ ENABLED(ANYCUBIC_LCD_I3MEGA) \
+ ENABLED(ANYCUBIC_LCD_CHIRON) \
+ ENABLED(TFTGLCD_PANEL_SPI) \
+ ENABLED(TFTGLCD_PANEL_I2C)
+ ENABLED(U8GLIB_SH1106_EINSTART) \
+ ENABLED(ULTI_CONTROLLER) \
+ ENABLED(ULTIMAKERCONTROLLER) \
+ ENABLED(ZONESTAR_LCD)
#error "Please select only one LCD controller option."
#endif
#undef IS_RRD_SC
#undef IS_RRD_FG_SC
#undef IS_ULTRA_LCD
#undef IS_U8GLIB_SSD1306
#undef IS_RRW_KEYPAD
#undef IS_EXTUI
#undef IS_ULTIPANEL
#undef IS_LEGACY_TFT
#if 1 < ENABLED(LCD_SCREEN_ROT_0) + ENABLED(LCD_SCREEN_ROT_90) + ENABLED(LCD_SCREEN_ROT_180) + ENABLED(LCD_SCREEN_ROT_270)
#if ANY(TFT_GENERIC, MKS_TS35_V2_0, MKS_ROBIN_TFT24, MKS_ROBIN_TFT28, MKS_ROBIN_TFT32, MKS_ROBIN_TFT35, MKS_ROBIN_TFT43, MKS_ROBIN_TFT_V1_1R, TFT_TRONXY_X5SA, ANYCUBIC_TFT35, ANYCUBIC_TFT35, LONGER_LK_TFT28)
#if NONE(TFT_COLOR_UI, TFT_CLASSIC_UI, TFT_LVGL_UI)
#error "TFT_COLOR_UI, TFT_CLASSIC_UI, TFT_LVGL_UI is required for your TFT. Please enable one."
#elif 1 < ENABLED(TFT_COLOR_UI) + ENABLED(TFT_CLASSIC_UI) + ENABLED(TFT_LVGL_UI)
#error "Please select only one of TFT_COLOR_UI, TFT_CLASSIC_UI, or TFT_LVGL_UI."
#endif
#elif ANY(TFT_COLOR_UI, TFT_CLASSIC_UI, TFT_LVGL_UI)
#error "TFT_(COLOR|CLASSIC|LVGL)_UI requires a TFT display to be enabled."
#endif
#if ENABLED(TFT_GENERIC) && NONE(TFT_INTERFACE_FSMC, TFT_INTERFACE_SPI)
#error "TFT_GENERIC requires either TFT_INTERFACE_FSMC or TFT_INTERFACE_SPI interface."
#endif
#if BOTH(TFT_INTERFACE_FSMC, TFT_INTERFACE_SPI)
#error "Please enable only one of TFT_INTERFACE_SPI or TFT_INTERFACE_SPI."
#endif
#if MANY(LCD_SCREEN_ROT_0, LCD_SCREEN_ROT_90, LCD_SCREEN_ROT_180, LCD_SCREEN_ROT_270)
#error "Please enable only one LCD_SCREEN_ROT_* option: 0, 90, 180, or 270."
#endif
#if MANY(TFT_RES_320x240, TFT_RES_480x272, TFT_RES_480x320)
#error "Please select only one of TFT_RES_480x320, TFT_RES_480x320, or TFT_RES_480x272."
#endif
#if HAS_TFT_LVGL_UI && DISABLED(TFT_RES_480x320)
#error "(FMSC|SPI)TFT_LVGL_UI requires TFT_RES_480x320."
#endif
#if defined(GRAPHICAL_TFT_UPSCALE) && !WITHIN(GRAPHICAL_TFT_UPSCALE, 2, 3)
#error "GRAPHICAL_TFT_UPSCALE must be set to 2 or 3."
#endif
/**
* Serial displays require a dedicated serial port
*/
@ -2756,7 +2739,7 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
#error "BLOCK_BUFFER_SIZE must be a power of 2."
#endif
#if ENABLED(LED_CONTROL_MENU) && DISABLED(ULTIPANEL)
#if ENABLED(LED_CONTROL_MENU) && !IS_ULTIPANEL
#error "LED_CONTROL_MENU requires an LCD controller."
#endif

2
Marlin/src/inc/Version.h
View file

@ -52,7 +52,7 @@
* to alert users to major changes.
*/
#define MARLIN_HEX_VERSION 020007
#define MARLIN_HEX_VERSION 020008
#ifndef REQUIRED_CONFIGURATION_H_VERSION
#define REQUIRED_CONFIGURATION_H_VERSION MARLIN_HEX_VERSION
#endif

2
Marlin/src/lcd/TFTGLCD/ultralcd_TFTGLCD.cpp
View file

@ -28,7 +28,7 @@
* ultralcd_TFTGLCD.cpp
*
* Implementation of the LCD display routines for a TFT GLCD displays with external controller.
* This display looks as a REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER but has good text font
* This display looks like a REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER but has good text font
* and supports color output.
*/

2
Marlin/src/lcd/dogm/HAL_LCD_com_defines.h
View file

@ -112,7 +112,7 @@
#ifndef U8G_COM_SSD_I2C_HAL
#define U8G_COM_SSD_I2C_HAL u8g_com_null_fn
#endif
#if EITHER(FSMC_GRAPHICAL_TFT, SPI_GRAPHICAL_TFT)
#if HAS_FSMC_GRAPHICAL_TFT || HAS_SPI_GRAPHICAL_TFT
uint8_t u8g_com_hal_tft_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_HAL_TFT_FN u8g_com_hal_tft_fn
#else

4
Marlin/src/lcd/dogm/u8g_dev_tft_upscale_from_128x64.cpp
View file

@ -55,7 +55,7 @@
#include "../../inc/MarlinConfig.h"
#if HAS_MARLINUI_U8GLIB && (PIN_EXISTS(FSMC_CS) || ENABLED(SPI_GRAPHICAL_TFT))
#if HAS_MARLINUI_U8GLIB && (PIN_EXISTS(FSMC_CS) || HAS_SPI_GRAPHICAL_TFT)
#include "HAL_LCD_com_defines.h"
#include "ultralcd_DOGM.h"
@ -477,4 +477,4 @@ uint8_t u8g_com_hal_tft_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_p
U8G_PB_DEV(u8g_dev_tft_320x240_upscale_from_128x64, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_tft_320x240_upscale_from_128x64_fn, U8G_COM_HAL_TFT_FN);
#endif // HAS_MARLINUI_U8GLIB && FSMC_CS
#endif // HAS_MARLINUI_U8GLIB && (FSMC_CS_PIN || HAS_SPI_GRAPHICAL_TFT)

2
Marlin/src/lcd/dogm/ultralcd_DOGM.h
View file

@ -189,7 +189,7 @@
// Unspecified 320x240 TFT pre-initialized by built-in bootloader
#define U8G_CLASS U8GLIB_TFT_320X240_UPSCALE_FROM_128X64
#if ENABLED(FSMC_GRAPHICAL_TFT)
#if HAS_FSMC_GRAPHICAL_TFT
#define U8G_PARAM FSMC_CS_PIN, FSMC_RS_PIN
#else
#define U8G_PARAM -1, -1

6
Marlin/src/lcd/extui/lib/mks_ui/draw_print_file.cpp
View file

@ -520,7 +520,7 @@ void lv_gcode_file_read(uint8_t *data_buf) {
j = 0;
ignore_start = false;
}
#if ENABLED(TFT_LVGL_UI_SPI)
#if HAS_TFT_LVGL_UI_SPI
for (i = 0; i < 200;) {
p_index = (uint16_t *)(&public_buf[i]);
@ -529,7 +529,7 @@ void lv_gcode_file_read(uint8_t *data_buf) {
i += 2;
if (*p_index == 0x0000) *p_index = LV_COLOR_BACKGROUND.full;
}
#else
#else // !HAS_TFT_LVGL_UI_SPI
for (i = 0; i < 200;) {
p_index = (uint16_t *)(&public_buf[i]);
//Color = (*p_index >> 8);
@ -537,7 +537,7 @@ void lv_gcode_file_read(uint8_t *data_buf) {
i += 2;
if (*p_index == 0x0000) *p_index = LV_COLOR_BACKGROUND.full; // 0x18C3;
}
#endif // TFT_LVGL_UI_SPI
#endif // !HAS_TFT_LVGL_UI_SPI
memcpy(data_buf, public_buf, 200);
#endif // SDSUPPORT
}

4
Marlin/src/lcd/extui/lib/mks_ui/draw_ui.cpp
View file

@ -751,7 +751,7 @@ char *creat_title_text() {
card.openFileRead(cur_name);
card.setIndex((PREVIEW_LITTLE_PIC_SIZE + To_pre_view) + size * row + 8);
#if ENABLED(TFT_LVGL_UI_SPI)
#if HAS_TFT_LVGL_UI_SPI
SPI_TFT.setWindow(xpos_pixel, ypos_pixel + row, 200, 1);
#else
LCD_setWindowArea(xpos_pixel, ypos_pixel + row, 200, 1);
@ -782,7 +782,7 @@ char *creat_title_text() {
//#endif
}
#if ENABLED(TFT_LVGL_UI_SPI)
#if HAS_TFT_LVGL_UI_SPI
for (i = 0; i < 400;) {
p_index = (uint16_t *)(&bmp_public_buf[i]);

4
Marlin/src/lcd/scaled_tft.h
View file

@ -49,7 +49,7 @@
#define TFT_PIXEL_OFFSET_X 48
#endif
#endif
#ifndef TFT_PIXEL_OFFSET_Y
// 32 is better for both 320x240 and 480x320
#define TFT_PIXEL_OFFSET_Y 32
#define TFT_PIXEL_OFFSET_Y 32 // 32 is best for both 320x240 and 480x320
#endif

8
Marlin/src/lcd/ultralcd.cpp
View file

@ -400,7 +400,7 @@ bool MarlinUI::get_blink() {
///////////// Keypad Handling //////////////
////////////////////////////////////////////
#if BOTH(REPRAPWORLD_KEYPAD, HAS_ENCODER_ACTION)
#if IS_RRW_KEYPAD && HAS_ENCODER_ACTION
volatile uint8_t MarlinUI::keypad_buttons;
@ -432,7 +432,7 @@ bool MarlinUI::get_blink() {
#if HAS_ENCODER_ACTION
refresh(LCDVIEW_REDRAW_NOW);
#if HAS_LCD_MENU
if (encoderDirection == -(ENCODERBASE)) { // ADC_KEYPAD forces REVERSE_MENU_DIRECTION, so this indicates menu navigation
if (encoderDirection == -(ENCODERBASE)) { // HAS_ADC_BUTTONS forces REVERSE_MENU_DIRECTION, so this indicates menu navigation
if (RRK(EN_KEYPAD_UP)) encoderPosition += ENCODER_STEPS_PER_MENU_ITEM;
else if (RRK(EN_KEYPAD_DOWN)) encoderPosition -= ENCODER_STEPS_PER_MENU_ITEM;
else if (RRK(EN_KEYPAD_LEFT)) { MenuItem_back::action(); quick_feedback(); }
@ -497,12 +497,12 @@ bool MarlinUI::get_blink() {
return true;
}
#endif // !ADC_KEYPAD
#endif // !HAS_ADC_BUTTONS
return false;
}
#endif // REPRAPWORLD_KEYPAD
#endif // IS_RRW_KEYPAD && HAS_ENCODER_ACTION
/**
* Status Screen

11
Marlin/src/lcd/ultralcd.h
View file

@ -34,13 +34,13 @@
#if EITHER(HAS_LCD_MENU, ULTIPANEL_FEEDMULTIPLY)
#define HAS_ENCODER_ACTION 1
#endif
#if ((!HAS_ADC_BUTTONS && ENABLED(NEWPANEL)) || BUTTONS_EXIST(EN1, EN2)) && !IS_TFTGLCD_PANEL
#if ((!HAS_ADC_BUTTONS && IS_NEWPANEL) || BUTTONS_EXIST(EN1, EN2)) && !IS_TFTGLCD_PANEL
#define HAS_ENCODER_WHEEL 1
#endif
#if HAS_ENCODER_WHEEL || ANY_BUTTON(ENC, BACK, UP, DWN, LFT, RT)
#define HAS_DIGITAL_BUTTONS 1
#endif
#if !HAS_ADC_BUTTONS && (ENABLED(REPRAPWORLD_KEYPAD) || (HAS_WIRED_LCD && DISABLED(NEWPANEL)))
#if !HAS_ADC_BUTTONS && (IS_RRW_KEYPAD || (HAS_WIRED_LCD && !IS_NEWPANEL))
#define HAS_SHIFT_ENCODER 1
#endif
@ -106,8 +106,7 @@
#endif // HAS_WIRED_LCD
// REPRAPWORLD_KEYPAD (and ADC_KEYPAD)
#if ENABLED(REPRAPWORLD_KEYPAD)
#if IS_RRW_KEYPAD
#define BTN_OFFSET 0 // Bit offset into buttons for shift register values
#define BLEN_KEYPAD_F3 0
@ -136,7 +135,7 @@
#define BUTTON_CLICK() RRK(EN_KEYPAD_MIDDLE)
#endif
#endif
#endif // IS_RRW_KEYPAD
#if HAS_DIGITAL_BUTTONS
@ -633,7 +632,7 @@ public:
#if HAS_ENCODER_ACTION
static volatile uint8_t buttons;
#if ENABLED(REPRAPWORLD_KEYPAD)
#if IS_RRW_KEYPAD
static volatile uint8_t keypad_buttons;
static bool handle_keypad();
#endif

2
Marlin/src/pins/esp32/pins_MRR_ESPE.h
View file

@ -134,7 +134,7 @@
#define BEEPER_PIN 151
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#elif IS_RRD_FG_SC
#define BEEPER_PIN 151

14
Marlin/src/pins/linux/pins_RAMPS_LINUX.h
View file

@ -400,7 +400,7 @@
#define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock
#elif BOTH(NEWPANEL, PANEL_ONE)
#elif BOTH(IS_NEWPANEL, PANEL_ONE)
#define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 42
@ -417,7 +417,7 @@
#define LCD_PINS_ENABLE 29
#define LCD_PINS_D4 25
#if DISABLED(NEWPANEL)
#if !IS_NEWPANEL
#define BEEPER_PIN 37
#endif
@ -450,13 +450,13 @@
#define LCD_PINS_D7 29
#if DISABLED(NEWPANEL)
#if !IS_NEWPANEL
#define BEEPER_PIN 33
#endif
#endif
#if DISABLED(NEWPANEL)
#if !IS_NEWPANEL
// Buttons attached to a shift register
// Not wired yet
//#define SHIFT_CLK 38
@ -470,7 +470,7 @@
//
// LCD Display input pins
//
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
@ -607,7 +607,7 @@
#define BEEPER_PIN 33
// Buttons are directly attached to AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
#if IS_RRW_KEYPAD
#define SHIFT_OUT 40
#define SHIFT_CLK 44
#define SHIFT_LD 42
@ -630,6 +630,6 @@
#endif
#endif
#endif // NEWPANEL
#endif // IS_NEWPANEL
#endif // HAS_WIRED_LCD

4
Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h
View file

@ -138,8 +138,8 @@
#define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3
#define LCD_PINS_D4 P0_15 // (SCK) EXP1-5
#if BOTH(HAS_MARLINUI_HD44780, REPRAP_DISCOUNT_SMART_CONTROLLER)
#error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU B300 v1.0"
#if BOTH(HAS_MARLINUI_HD44780, IS_RRD_SC)
#error "REPRAP_DISCOUNT_SMART_CONTROLLER displays aren't supported by the BIQU B300 v1.0"
#endif
#if ENABLED(SDSUPPORT)

4
Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h
View file

@ -109,8 +109,8 @@
#define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3
#define LCD_PINS_D4 P0_15 // (SCK) EXP1-5
#if BOTH(HAS_MARLINUI_HD44780, REPRAP_DISCOUNT_SMART_CONTROLLER)
#error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU BQ111-A4"
#if BOTH(HAS_MARLINUI_HD44780, IS_RRD_SC)
#error "REPRAP_DISCOUNT_SMART_CONTROLLER displays aren't supported by the BIQU BQ111-A4"
#endif
#if ENABLED(SDSUPPORT)

2
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h
View file

@ -348,7 +348,7 @@
#define LCD_BACKLIGHT_PIN -1
#endif
#if ENABLED(ULTIPANEL)
#if IS_ULTIPANEL
#define LCD_PINS_D5 EXPA1_05_PIN
#define LCD_PINS_D6 EXPA1_04_PIN
#define LCD_PINS_D7 EXPA1_03_PIN

5
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h
View file

@ -293,9 +293,6 @@
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1
#ifndef GRAPHICAL_TFT_UPSCALE
#define GRAPHICAL_TFT_UPSCALE 3
#endif
// SPI 1
#define SCK_PIN P0_15
#define MISO_PIN P0_17
@ -398,7 +395,7 @@
#define FORCE_SOFT_SPI
#endif
#if ENABLED(ULTIPANEL)
#if IS_ULTIPANEL
#define LCD_PINS_D5 P1_21
#define LCD_PINS_D6 P1_22
#define LCD_PINS_D7 P1_23

2
Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h
View file

@ -125,7 +125,7 @@
//
// LCD
//
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#if IS_RRD_SC
#define BEEPER_PIN P0_19
#define BTN_EN1 P1_23
#define BTN_EN2 P1_24

2
Marlin/src/pins/lpc1768/pins_MKS_SBASE.h
View file

@ -147,7 +147,7 @@
//
// Ethernet pins
//
#ifndef ULTIPANEL
#if !IS_ULTIPANEL
#define ENET_MDIO P1_17 // J12-4
#define ENET_RX_ER P1_14 // J12-6
#define ENET_RXD1 P1_10 // J12-8

2
Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h
View file

@ -319,7 +319,7 @@
#define DOGLCD_A0 P1_00
#endif
#if ENABLED(ULTIPANEL)
#if IS_ULTIPANEL
#define LCD_PINS_D5 P0_17
#define LCD_PINS_D6 P1_00
#define LCD_PINS_D7 P1_22

8
Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h
View file

@ -357,8 +357,8 @@
#define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4
#define LCD_SDSS P1_23 // (53) J3-5 & AUX-3
#if ENABLED(NEWPANEL)
#if ENABLED(REPRAPWORLD_KEYPAD)
#if IS_NEWPANEL
#if IS_RRW_KEYPAD
#define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3
#define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3
#define SHIFT_LD P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant)
@ -416,7 +416,7 @@
#define LCD_BACKLIGHT_PIN P0_16 //(16) J3-7 & AUX-4 - only used on DOGLCD controllers
#define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
#define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
#if ENABLED(ULTIPANEL)
#if IS_ULTIPANEL
#define LCD_PINS_D5 P1_17 // (71) ENET_MDIO
#define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER
#define LCD_PINS_D7 P1_10 // (75) ENET_RXD1
@ -436,7 +436,7 @@
//
// Ethernet pins
//
#if DISABLED(ULTIPANEL)
#if !IS_ULTIPANEL
#define ENET_MDIO P1_17 // (71) J12-4
#define ENET_RX_ER P1_14 // (73) J12-6
#define ENET_RXD1 P1_10 // (75) J12-8

4
Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h
View file

@ -96,7 +96,7 @@
// Display
//
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#if IS_RRD_FG_SC
#define LCD_PINS_RS P0_16
#define LCD_PINS_ENABLE P0_18
#define LCD_PINS_D4 P0_15
@ -110,4 +110,4 @@
#define BTN_ENC P1_30
#define SD_DETECT_PIN -1
#endif // REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
#endif // IS_RRD_FG_SC

6
Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h
View file

@ -144,11 +144,11 @@
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
#if IS_RRW_KEYPAD
#define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3
#define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3
#define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3
#elif DISABLED(NEWPANEL)
#elif !IS_NEWPANEL
//#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4
//#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4
//#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4
@ -166,7 +166,7 @@
#define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes
#define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
#else
#if ENABLED(ULTIPANEL)
#if IS_ULTIPANEL
#define LCD_PINS_D5 P1_17 // (71) ENET_MDIO
#define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER
#define LCD_PINS_D7 P1_10 // (75) ENET_RXD1

2
Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h
View file

@ -325,7 +325,7 @@
#define DOGLCD_A0 P1_00
#endif
#if ENABLED(ULTIPANEL)
#if IS_ULTIPANEL
#define LCD_PINS_D5 P0_17
#define LCD_PINS_D6 P1_00
#define LCD_PINS_D7 P1_22

2
Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h
View file

@ -138,7 +138,7 @@
* http://chibidibidiwah.wdfiles.com/local--files/panel/smoothieboard2sd.jpg
* http://smoothieware.org/panel
*/
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#if IS_RRD_FG_SC
// EXP1 Pins
#define BEEPER_PIN P1_31 // EXP1 Pin 1
#define BTN_ENC P1_30 // EXP1 Pin 2

2
Marlin/src/pins/mega/pins_CHEAPTRONICv2.h
View file

@ -129,7 +129,7 @@
#define SD_DETECT_PIN 49
#endif
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#define BTN_EN1 11
#define BTN_EN2 12
#define BTN_ENC 43

6
Marlin/src/pins/mega/pins_GT2560_REV_A.h
View file

@ -109,7 +109,7 @@
#define BEEPER_PIN 18
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#if ENABLED(MKS_MINI_12864)
#define DOGLCD_A0 5
@ -130,7 +130,7 @@
#define BTN_ENC 19
#define SD_DETECT_PIN 38
#else // !NEWPANEL
#else // !IS_NEWPANEL
#define SHIFT_CLK 38
#define SHIFT_LD 42
@ -146,6 +146,6 @@
#define SD_DETECT_PIN -1
#endif // !NEWPANEL
#endif // !IS_NEWPANEL
#endif // HAS_WIRED_LCD

2
Marlin/src/pins/mega/pins_GT2560_V3.h
View file

@ -172,7 +172,7 @@
#define LCD_PINS_D7 36
#endif
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#ifndef BTN_EN1
#define BTN_EN1 42
#endif

2
Marlin/src/pins/mega/pins_GT2560_V3_A20.h
View file

@ -32,7 +32,7 @@
#define SPEAKER // The speaker can produce tones
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#define BTN_EN1 16
#define BTN_EN2 17
#define BTN_ENC 19

4
Marlin/src/pins/mega/pins_HJC2560C_REV2.h
View file

@ -127,7 +127,7 @@
#define BEEPER_PIN 18
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#define LCD_PINS_RS 20 // LCD_CS
#define LCD_PINS_ENABLE 15 // LCD_SDA
@ -168,6 +168,6 @@
#define LCD_PINS_D6 20
#define LCD_PINS_D7 19
#endif // !NEWPANEL
#endif // !IS_NEWPANEL
#endif // HAS_WIRED_LCD

4
Marlin/src/pins/mega/pins_MEGATRONICS.h
View file

@ -108,7 +108,7 @@
//
#define BEEPER_PIN 33
#if BOTH(ULTRA_LCD, NEWPANEL)
#if IS_ULTRA_LCD && IS_NEWPANEL
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
@ -124,7 +124,7 @@
#define SD_DETECT_PIN -1 // RAMPS doesn't use this
#endif // ULTRA_LCD && NEWPANEL
#endif // IS_ULTRA_LCD && IS_NEWPANEL
//
// M3/M4/M5 - Spindle/Laser Control

2
Marlin/src/pins/mega/pins_MEGATRONICS_2.h
View file

@ -139,7 +139,7 @@
#define LCD_PINS_D6 32
#define LCD_PINS_D7 33
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
// Buttons are directly attached using keypad
#define BTN_EN1 61
#define BTN_EN2 59

2
Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h
View file

@ -214,7 +214,7 @@
//
#if HAS_WIRED_LCD
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#if IS_RRD_FG_SC
#define LCD_PINS_RS 33 // C4: LCD-STROBE
#define LCD_PINS_ENABLE 72 // J2: LEFT

2
Marlin/src/pins/mega/pins_OVERLORD.h
View file

@ -132,7 +132,7 @@
#endif
#endif
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#define BTN_ENC 16 // Enter Pin
#define BTN_UP 19 // Button UP Pin
#define BTN_DWN 17 // Button DOWN Pin

4
Marlin/src/pins/pins.h
View file

@ -49,7 +49,9 @@
#define IS_RAMPS_SF
#endif
#define HAS_FREE_AUX2_PINS !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD))
#if !(BOTH(IS_ULTRA_LCD, IS_NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD))
#define HAS_FREE_AUX2_PINS 1
#endif
// Test the target within the included pins file
#ifdef __MARLIN_DEPS__

4
Marlin/src/pins/rambo/pins_EINSY_RAMBO.h
View file

@ -164,7 +164,7 @@
#define KILL_PIN 32
#if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL
#if IS_ULTIPANEL || TOUCH_UI_ULTIPANEL
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS 85
@ -187,5 +187,5 @@
#define BEEPER_PIN 84 // AUX-4
#define SD_DETECT_PIN 15
#endif // ULTIPANEL || TOUCH_UI_ULTIPANEL
#endif // IS_ULTIPANEL || TOUCH_UI_ULTIPANEL
#endif // HAS_WIRED_LCD

4
Marlin/src/pins/rambo/pins_EINSY_RETRO.h
View file

@ -170,7 +170,7 @@
#define KILL_PIN 32
#if ANY(ULTIPANEL, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE)
#if ANY(IS_ULTIPANEL, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE)
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS 85
@ -194,6 +194,6 @@
#define SD_DETECT_PIN 15
#endif // ULTIPANEL || TOUCH_UI_ULTIPANEL || TOUCH_UI_FTDI_EVE
#endif // IS_ULTIPANEL || TOUCH_UI_ULTIPANEL || TOUCH_UI_FTDI_EVE
#endif // HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL || TOUCH_UI_FTDI_EVE

4
Marlin/src/pins/rambo/pins_MINIRAMBO.h
View file

@ -147,7 +147,7 @@
#define KILL_PIN 32
#endif
#if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL
#if IS_ULTIPANEL || TOUCH_UI_ULTIPANEL
#if MB(MINIRAMBO_10A)
@ -187,6 +187,6 @@
#endif // !MINIRAMBO_10A
#endif // ULTIPANEL || TOUCH_UI_ULTIPANEL
#endif // IS_ULTIPANEL || TOUCH_UI_ULTIPANEL
#endif // HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL

6
Marlin/src/pins/rambo/pins_RAMBO.h
View file

@ -187,7 +187,7 @@
#define KILL_PIN 80
#if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL
#if IS_ULTIPANEL || TOUCH_UI_ULTIPANEL
#define LCD_PINS_RS 70
#define LCD_PINS_ENABLE 71
@ -228,7 +228,7 @@
#endif // !VIKI2 && !miniVIKI
#else // !NEWPANEL - old style panel with shift register
#else // !IS_NEWPANEL - old style panel with shift register
// No Beeper added
#define BEEPER_PIN 33
@ -247,6 +247,6 @@
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif // !NEWPANEL
#endif // !IS_NEWPANEL
#endif // HAS_WIRED_LCD

6
Marlin/src/pins/ramps/pins_3DRAG.h
View file

@ -78,7 +78,7 @@
//
// LCD / Controller
//
#if BOTH(ULTRA_LCD, NEWPANEL)
#if IS_ULTRA_LCD && IS_NEWPANEL
#undef BEEPER_PIN
#undef LCD_PINS_RS
@ -106,7 +106,7 @@
#define BEEPER_PIN 33
#endif // ULTRA_LCD && NEWPANEL
#endif // IS_ULTRA_LCD && IS_NEWPANEL
/**
* M3/M4/M5 - Spindle/Laser Control
@ -157,7 +157,7 @@
#define SPINDLE_LASER_PWM_PIN 46 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 62 // Pullup!
#define SPINDLE_DIR_PIN 48
#elif !BOTH(ULTRA_LCD, NEWPANEL) // use expansion header if no LCD in use
#elif !BOTH(IS_ULTRA_LCD, IS_NEWPANEL) // use expansion header if no LCD in use
#define SPINDLE_LASER_ENA_PIN 16 // Pullup or pulldown!
#define SPINDLE_DIR_PIN 17
#endif

4
Marlin/src/pins/ramps/pins_FELIX2.h
View file

@ -49,11 +49,11 @@
//
// LCD / Controller
//
#if BOTH(ULTRA_LCD, NEWPANEL)
#if IS_ULTRA_LCD && IS_NEWPANEL
#define SD_DETECT_PIN 6
#endif // NEWPANEL && ULTRA_LCD
#endif
//
// M3/M4/M5 - Spindle/Laser Control

2
Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h
View file

@ -181,7 +181,7 @@
//
// Formbot only supports REPRAP_DISCOUNT_SMART_CONTROLLER
//
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#if IS_RRD_SC
#define BEEPER_PIN 37
#define BTN_EN1 31
#define BTN_EN2 33

2
Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h
View file

@ -175,7 +175,7 @@
//
// Formbot only supports REPRAP_DISCOUNT_SMART_CONTROLLER
//
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#if IS_RRD_SC
#ifndef BEEPER_PIN
#define BEEPER_PIN 37
#endif

2
Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h
View file

@ -155,7 +155,7 @@
//
// Formbot only supports REPRAP_DISCOUNT_SMART_CONTROLLER
//
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#if IS_RRD_SC
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23

2
Marlin/src/pins/ramps/pins_FYSETC_F6_13.h
View file

@ -277,7 +277,7 @@
#endif
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35

2
Marlin/src/pins/ramps/pins_K8600.h
View file

@ -96,7 +96,7 @@
//
// LCD / Controller
//
#if BOTH(ULTRA_LCD, NEWPANEL)
#if IS_ULTRA_LCD && IS_NEWPANEL
#undef BEEPER_PIN
#undef LCD_PINS_RS

2
Marlin/src/pins/ramps/pins_K8800.h
View file

@ -113,7 +113,7 @@
#define LCD_CONTRAST_MAX 100
#define DEFAULT_LCD_CONTRAST 30
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#define BTN_EN1 17
#define BTN_EN2 16
#define BTN_ENC 23

2
Marlin/src/pins/ramps/pins_ORTUR_4.h
View file

@ -91,7 +91,7 @@
//
// LCD / Controller
//
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#if IS_RRD_FG_SC
#undef BEEPER_PIN
#define BEEPER_PIN 35

19
Marlin/src/pins/ramps/pins_RAMPS.h
View file

@ -441,7 +441,7 @@
#define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock
#elif BOTH(NEWPANEL, PANEL_ONE)
#elif BOTH(IS_NEWPANEL, PANEL_ONE)
#define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 42
@ -462,7 +462,7 @@
#define LCD_PINS_ENABLE 29
#define LCD_PINS_D4 25
#if DISABLED(NEWPANEL)
#if !IS_NEWPANEL
#define BEEPER_PIN 37
#endif
@ -481,10 +481,10 @@
#define LCD_PINS_DC 25 // Set as output on init
#define LCD_PINS_RS 27 // Pull low for 1s to init
// DOGM SPI LCD Support
#define DOGLCD_A0 LCD_PINS_DC
#define DOGLCD_CS 16
#define DOGLCD_MOSI 17
#define DOGLCD_SCK 23
#define DOGLCD_A0 LCD_PINS_DC
#else
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
@ -495,13 +495,13 @@
#define LCD_PINS_D7 29
#if DISABLED(NEWPANEL)
#if !IS_NEWPANEL
#define BEEPER_PIN 33
#endif
#endif
#if DISABLED(NEWPANEL)
#if !IS_NEWPANEL
// Buttons attached to a shift register
// Not wired yet
//#define SHIFT_CLK 38
@ -515,9 +515,9 @@
//
// LCD Display input pins
//
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#if IS_RRD_SC
#define BEEPER_PIN 37
@ -685,6 +685,7 @@
#elif ENABLED(AZSMZ_12864)
// Pins only defined for RAMPS_SMART currently
#error "No pins defined for RAMPS with AZSMZ_12864."
#elif IS_TFTGLCD_PANEL
@ -712,11 +713,11 @@
#endif
#endif
#endif // NEWPANEL
#endif // IS_NEWPANEL
#endif // HAS_WIRED_LCD
#if ENABLED(REPRAPWORLD_KEYPAD) && DISABLED(ADC_KEYPAD)
#if IS_RRW_KEYPAD && !HAS_ADC_BUTTONS
#define SHIFT_OUT 40
#define SHIFT_CLK 44
#define SHIFT_LD 42

2
Marlin/src/pins/ramps/pins_RAMPS_PLUS.h
View file

@ -73,7 +73,7 @@
#undef E0_CS_PIN
#undef E1_CS_PIN
#if ENABLED(ULTRA_LCD) && NONE(REPRAPWORLD_GRAPHICAL_LCD, CR10_STOCKDISPLAY) && !BOTH(NEWPANEL, PANEL_ONE)
#if IS_ULTRA_LCD && NONE(REPRAPWORLD_GRAPHICAL_LCD, CR10_STOCKDISPLAY) && !BOTH(IS_NEWPANEL, PANEL_ONE)
#if DISABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306)
#undef LCD_PINS_RS
#define LCD_PINS_RS 42 // 3DYMY boards pin 16 -> 42

2
Marlin/src/pins/ramps/pins_RIGIDBOARD.h
View file

@ -124,7 +124,7 @@
#undef SD_DETECT_PIN
#define SD_DETECT_PIN 22
#elif ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#elif IS_RRD_SC
#undef SD_DETECT_PIN
#define SD_DETECT_PIN 22

2
Marlin/src/pins/ramps/pins_RUMBA.h
View file

@ -227,7 +227,7 @@
#define SD_DETECT_PIN 49
#endif
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#define BTN_EN1 11
#define BTN_EN2 12
#define BTN_ENC 43

4
Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h
View file

@ -163,7 +163,7 @@
// LCD / Controller
//
//#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
//#if IS_RRD_SC
#define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1
@ -182,4 +182,4 @@
#define BEEPER_PIN -1
//#endif
//#endif // REPRAP_DISCOUNT_SMART_CONTROLLER
//#endif // IS_RRD_SC

4
Marlin/src/pins/ramps/pins_TRIGORILLA_14.h
View file

@ -131,13 +131,13 @@
#if 0 && HAS_WIRED_LCD
// LCD Display output pins
#if BOTH(NEWPANEL, PANEL_ONE)
#if BOTH(IS_NEWPANEL, PANEL_ONE)
#undef LCD_PINS_D6
#define LCD_PINS_D6 57
#endif
// LCD Display input pins
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#if ANY(VIKI2, miniVIKI)
#undef DOGLCD_A0
#define DOGLCD_A0 23

16
Marlin/src/pins/ramps/pins_TT_OSCAR.h
View file

@ -282,7 +282,7 @@
#define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock
#elif BOTH(NEWPANEL, PANEL_ONE)
#elif BOTH(IS_NEWPANEL, PANEL_ONE)
#define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 42
@ -309,7 +309,7 @@
#define LCD_PINS_ENABLE 29
#define LCD_PINS_D4 25
#if DISABLED(NEWPANEL)
#if !IS_NEWPANEL
#define BEEPER_PIN 37
#endif
@ -333,13 +333,13 @@
#define LCD_PINS_D7 29
#if DISABLED(NEWPANEL)
#if !IS_NEWPANEL
#define BEEPER_PIN 33
#endif
#endif
#if DISABLED(NEWPANEL)
#if !IS_NEWPANEL
// Buttons attached to a shift register
// Not wired yet
//#define SHIFT_CLK 38
@ -353,9 +353,9 @@
//
// LCD Display input pins
//
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#if IS_RRD_SC
#define BEEPER_PIN 37
@ -486,7 +486,7 @@
#define BEEPER_PIN 33
// Buttons are directly attached to AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
#if IS_RRW_KEYPAD
#define SHIFT_OUT 40
#define SHIFT_CLK 44
#define SHIFT_LD 42
@ -510,6 +510,6 @@
#endif
#endif // NEWPANEL
#endif // IS_NEWPANEL
#endif

6
Marlin/src/pins/ramps/pins_ULTIMAKER.h
View file

@ -123,7 +123,7 @@
#define BEEPER_PIN 18
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#define LCD_PINS_RS 20
#define LCD_PINS_ENABLE 17
@ -139,7 +139,7 @@
#define SD_DETECT_PIN 38
#else // !NEWPANEL - Old style panel with shift register
#else // !IS_NEWPANEL - Old style panel with shift register
// Buttons attached to a shift register
#define SHIFT_CLK 38
@ -156,7 +156,7 @@
#define SD_DETECT_PIN -1
#endif // !NEWPANEL
#endif // !IS_NEWPANEL
#endif // HAS_WIRED_LCD

8
Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h
View file

@ -174,11 +174,11 @@
#define LCD_PINS_D6 32
#define LCD_PINS_D7 30
#elif BOTH(BOARD_REV_1_5, ULTRA_LCD)
#elif BOTH(BOARD_REV_1_5, IS_ULTRA_LCD)
#define BEEPER_PIN 18
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#define LCD_PINS_RS 20
#define LCD_PINS_ENABLE 17
@ -194,7 +194,7 @@
#define SD_DETECT_PIN 38
#else // !NEWPANEL - Old style panel with shift register
#else // !IS_NEWPANEL - Old style panel with shift register
// Buttons attached to a shift register
#define SHIFT_CLK 38
@ -209,7 +209,7 @@
#define LCD_PINS_D6 20
#define LCD_PINS_D7 19
#endif // !NEWPANEL
#endif // !IS_NEWPANEL
#endif

4
Marlin/src/pins/sam/pins_ALLIGATOR_R2.h
View file

@ -143,7 +143,7 @@
//
// LCD / Controller
//
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#if IS_RRD_FG_SC
#define LCD_PINS_RS 18
#define LCD_PINS_ENABLE 15
#define LCD_PINS_D4 19
@ -152,7 +152,7 @@
#define UI_VOLTAGE_LEVEL 1
#endif
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#define BTN_EN1 14
#define BTN_EN2 16
#define BTN_ENC 17

4
Marlin/src/pins/sam/pins_ARCHIM1.h
View file

@ -192,10 +192,10 @@
#define SD_DETECT_PIN 2 // D2 PB25_TIOA0
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
// Buttons on AUX-2
#define BTN_EN1 60 // D60 PA3_TIOB1
#define BTN_EN2 13 // D13 PB27_TIOB0
#define BTN_ENC 16 // D16 PA13_TXD1
#endif // NEWPANEL
#endif // IS_NEWPANEL
#endif // HAS_WIRED_LCD

14
Marlin/src/pins/sam/pins_ARCHIM2.h
View file

@ -247,11 +247,11 @@
#define LCD_PINS_D7 34 // D34 PC2_PWML0
#define SD_DETECT_PIN 2 // D2 PB25_TIOA0
#if ANY(ULTIPANEL, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE)
// Buttons on AUX-2
#define BTN_EN1 60 // D60 PA3_TIOB1
#define BTN_EN2 13 // D13 PB27_TIOB0
#define BTN_ENC 16 // D16 PA13_TXD1 // the click
#endif
#endif
#if ANY(IS_ULTIPANEL, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE)
// Buttons on AUX-2
#define BTN_EN1 60 // D60 PA3_TIOB1
#define BTN_EN2 13 // D13 PB27_TIOB0
#define BTN_ENC 16 // D16 PA13_TXD1 // the click
#endif

2
Marlin/src/pins/sam/pins_DUE3DOM.h
View file

@ -122,7 +122,7 @@
#define LCD_PINS_D6 46
#define LCD_PINS_D7 47
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#if IS_RRD_SC
#define BEEPER_PIN 41

2
Marlin/src/pins/sam/pins_DUE3DOM_MINI.h
View file

@ -114,7 +114,7 @@
#define LCD_PINS_D6 46
#define LCD_PINS_D7 47
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#if IS_RRD_SC
#define BEEPER_PIN 41

2
Marlin/src/pins/sam/pins_RADDS.h
View file

@ -248,7 +248,7 @@
#define SDSS 10
#define SD_DETECT_PIN 14
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#elif IS_RRD_FG_SC
// The REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER requires
// an adapter such as https://www.thingiverse.com/thing:1740725

8
Marlin/src/pins/sam/pins_RAMPS_DUO.h
View file

@ -78,7 +78,7 @@
//
#if HAS_WIRED_LCD
#if BOTH(NEWPANEL, PANEL_ONE)
#if BOTH(IS_NEWPANEL, PANEL_ONE)
#undef LCD_PINS_D4
#define LCD_PINS_D4 68
@ -89,7 +89,7 @@
#define LCD_PINS_D7 67
#endif
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
@ -115,7 +115,7 @@
#else
#if ENABLED(REPRAPWORLD_KEYPAD)
#if IS_RRW_KEYPAD
#undef BTN_EN1
#define BTN_EN1 67 // encoder
@ -127,6 +127,6 @@
#endif
#endif
#endif // NEWPANEL
#endif // IS_NEWPANEL
#endif // HAS_WIRED_LCD

4
Marlin/src/pins/sam/pins_RAMPS_FD_V1.h
View file

@ -148,7 +148,7 @@
#define BTN_ENC 35
#define SD_DETECT_PIN 49
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#endif
@ -178,7 +178,7 @@
#define NEOPIXEL_PIN 25
#endif
#elif ENABLED(NEWPANEL)
#elif IS_NEWPANEL
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25

8
Marlin/src/pins/sam/pins_RURAMPS4D_11.h
View file

@ -202,7 +202,7 @@
//
#if HAS_WIRED_LCD
#if ANY(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER, REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#if ANY(RADDS_DISPLAY, IS_RRD_SC, IS_RRD_FG_SC)
#define BEEPER_PIN 62
#define LCD_PINS_D4 48
#define LCD_PINS_D5 50
@ -211,12 +211,12 @@
#define SD_DETECT_PIN 51
#endif
#if EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER)
#if EITHER(RADDS_DISPLAY, IS_RRD_SC)
#define LCD_PINS_RS 63
#define LCD_PINS_ENABLE 64
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#elif IS_RRD_FG_SC
#define LCD_PINS_RS 52
#define LCD_PINS_ENABLE 53
@ -265,7 +265,7 @@
#endif // SPARK_FULL_GRAPHICS
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#define BTN_EN1 44
#define BTN_EN2 42
#define BTN_ENC 40

8
Marlin/src/pins/sam/pins_RURAMPS4D_13.h
View file

@ -188,7 +188,7 @@
//
#if HAS_WIRED_LCD
#if ANY(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER, REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#if ANY(RADDS_DISPLAY, IS_RRD_SC, IS_RRD_FG_SC)
#define BEEPER_PIN 62
#define LCD_PINS_D4 48
#define LCD_PINS_D5 50
@ -197,12 +197,12 @@
#define SD_DETECT_PIN 51
#endif
#if EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER)
#if EITHER(RADDS_DISPLAY, IS_RRD_SC)
#define LCD_PINS_RS 63
#define LCD_PINS_ENABLE 64
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#elif IS_RRD_FG_SC
#define LCD_PINS_RS 52
#define LCD_PINS_ENABLE 53
@ -247,7 +247,7 @@
#endif
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#define BTN_EN1 44
#define BTN_EN2 42
#define BTN_ENC 40

16
Marlin/src/pins/samd/pins_RAMPS_144.h
View file

@ -299,7 +299,7 @@
//#define LCD_PINS_ENABLE 51 // SID (MOSI)
//#define LCD_PINS_D4 52 // SCK (CLK) clock
#elif BOTH(NEWPANEL, PANEL_ONE)
#elif BOTH(IS_NEWPANEL, PANEL_ONE)
// TO TEST
//#define LCD_PINS_RS 40
@ -318,7 +318,7 @@
//#define LCD_PINS_ENABLE 29
//#define LCD_PINS_D4 25
#if DISABLED(NEWPANEL)
#if !IS_NEWPANEL
// TO TEST
//#define BEEPER_PIN 37
#endif
@ -354,13 +354,13 @@
#define LCD_PINS_D7 29
#if DISABLED(NEWPANEL)
#if !IS_NEWPANEL
#define BEEPER_PIN 33
#endif
#endif
#if DISABLED(NEWPANEL)
#if !IS_NEWPANEL
// Buttons attached to a shift register
// Not wired yet
//#define SHIFT_CLK 38
@ -374,9 +374,9 @@
//
// LCD Display input pins
//
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#if IS_RRD_SC
#define BEEPER_PIN 37
@ -565,7 +565,7 @@
//#define BEEPER_PIN 33
// Buttons are directly attached to AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
#if IS_RRW_KEYPAD
// TO TEST
//#define SHIFT_OUT 40
//#define SHIFT_CLK 44
@ -592,7 +592,7 @@
#endif
#endif
#endif // NEWPANEL
#endif // IS_NEWPANEL
#endif // HAS_WIRED_LCD

4
Marlin/src/pins/sanguino/pins_ANET_10.h
View file

@ -151,7 +151,7 @@
#if HAS_WIRED_LCD
#define LCD_SDSS 28
#if ENABLED(ADC_KEYPAD)
#if HAS_ADC_BUTTONS
#define SERVO0_PIN 27 // free for BLTouch/3D-Touch
#define LCD_PINS_RS 28
#define LCD_PINS_ENABLE 29
@ -160,7 +160,7 @@
#define LCD_PINS_D6 16
#define LCD_PINS_D7 17
#define ADC_KEYPAD_PIN 1
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#elif IS_RRD_FG_SC
// Pin definitions for the Anet A6 Full Graphics display and the RepRapDiscount Full Graphics
// display using an adapter board // https://go.aisler.net/benlye/anet-lcd-adapter/pcb
// See below for alternative pin definitions for use with https://www.thingiverse.com/thing:2103748

8
Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h
View file

@ -136,7 +136,7 @@
#define LCD_BACKLIGHT_PIN 17 // LCD backlight LED
#endif
#if NONE(SPINDLE_FEATURE, LASER_FEATURE) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(ULTRA_LCD, NEWPANEL)// try to use IO Header
#if NONE(SPINDLE_FEATURE, LASER_FEATURE) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(IS_ULTRA_LCD, IS_NEWPANEL) // try to use IO Header
#define CASE_LIGHT_PIN 4 // Hardware PWM - see if IO Header is available
#endif
@ -185,7 +185,7 @@
// with M42 instead of BEEPER_PIN.
#define BEEPER_PIN 27
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#if IS_RRD_FG_SC
#ifndef BOARD_ST7920_DELAY_1
#define BOARD_ST7920_DELAY_1 DELAY_NS(0)
#endif
@ -283,7 +283,7 @@
#endif
#if ENABLED(NEWPANEL) && !defined(BTN_EN1)
#if IS_NEWPANEL && !defined(BTN_EN1)
#define BTN_EN1 11
#define BTN_EN2 10
#endif
@ -294,7 +294,7 @@
// M3/M4/M5 - Spindle/Laser Control
//
#if HAS_CUTTER
#if !MB(AZTEEG_X1) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(ULTRA_LCD, NEWPANEL)// try to use IO Header
#if !MB(AZTEEG_X1) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(IS_ULTRA_LCD, IS_NEWPANEL) // try to use IO Header
#define SPINDLE_LASER_ENA_PIN 10 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM

2
Marlin/src/pins/sanguino/pins_ZMIB_V2.h
View file

@ -225,7 +225,7 @@
//
// All the above are also RRDSC with rotary encoder
//
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#if IS_RRD_SC
#define BTN_EN1 2
#define BTN_EN2 12
#define BTN_ENC 29

2
Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h
View file

@ -175,7 +175,7 @@
#else // !FYSETC_MINI_12864
#define LCD_PINS_D4 PC13
#if ENABLED(ULTIPANEL)
#if IS_ULTIPANEL
#define LCD_PINS_D5 PB7
#define LCD_PINS_D6 PC15
#define LCD_PINS_D7 PC14

12
Marlin/src/pins/stm32f1/pins_CHITU3D.h
View file

@ -126,7 +126,7 @@
#define LCD_PINS_RS PD1 // 49 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE PD3 // 51 // SID (MOSI)
#define LCD_PINS_D4 PD4 // 52 // SCK (CLK) clock
#elif BOTH(NEWPANEL, PANEL_ONE)
#elif BOTH(IS_NEWPANEL, PANEL_ONE)
#define LCD_PINS_RS PB8
#define LCD_PINS_ENABLE PD2
#define LCD_PINS_D4 PB12
@ -140,7 +140,7 @@
#define LCD_PINS_D5 PB13
#define LCD_PINS_D6 PB14
#define LCD_PINS_D7 PB15
#if DISABLED(NEWPANEL)
#if !IS_NEWPANEL
#define BEEPER_PIN PC1 // 33
// Buttons attached to a shift register
// Not wired yet
@ -151,9 +151,9 @@
#endif
#endif
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#if IS_RRD_SC
#define BEEPER_PIN PC5
@ -254,7 +254,7 @@
#define BEEPER_PIN PC1 // 33
// Buttons directly attached to AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
#if IS_RRW_KEYPAD
#define BTN_EN1 PE0 // 64
#define BTN_EN2 PD11 // 59
#define BTN_ENC PD15 // 63
@ -279,6 +279,6 @@
#endif
#endif
#endif // NEWPANEL
#endif // IS_NEWPANEL
#endif // HAS_WIRED_LCD

3
Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h
View file

@ -152,9 +152,6 @@
// Color UI
#define TFT_DRIVER ILI9488
#define TFT_BUFFER_SIZE 14400
#elif ENABLED(TFT_CLASSIC_UI)
// Emulated DOGM
#define GRAPHICAL_TFT_UPSCALE 3
#endif
// XPT2046 Touch Screen calibration

3
Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h
View file

@ -167,9 +167,6 @@
// Color UI
#define TFT_DRIVER ILI9488
#define TFT_BUFFER_SIZE 14400
#elif ENABLED(TFT_CLASSIC_UI)
// Emulated DOGM
#define GRAPHICAL_TFT_UPSCALE 3
#endif
// XPT2046 Touch Screen calibration

2
Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h
View file

@ -162,7 +162,7 @@
// not connected to a pin
#define SD_DETECT_PIN PC3
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
// The encoder and click button
#define BTN_EN1 PC10
#define BTN_EN2 PC11

2
Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h
View file

@ -153,7 +153,7 @@
//#define LCD_CONTRAST_INIT 190
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#define BTN_EN1 PC10
#define BTN_EN2 PC11
#define BTN_ENC PC12

4
Marlin/src/pins/stm32f1/pins_GTM32_MINI.h
View file

@ -137,7 +137,7 @@
//
#if HAS_WIRED_LCD
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#if IS_RRD_SC
//
// LCD display on J2 FFC40
// Geeetech's LCD2004A Control Panel is very much like
@ -172,7 +172,7 @@
#endif // HAS_WIRED_LCD
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#if IS_RRD_SC
//
// Geeetech's LCD2004A Control Panel is very much like
// RepRapDiscount Smart Controller, but adds an FFC40 connector

2
Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h
View file

@ -137,7 +137,7 @@
//
#if HAS_WIRED_LCD
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#if IS_RRD_SC
//
// LCD display on J2 FFC40
// Geeetech's LCD2004A Control Panel is very much like

4
Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h
View file

@ -137,7 +137,7 @@
//
#if HAS_WIRED_LCD
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#if IS_RRD_SC
//
// LCD display on J2 FFC40
// Geeetech's LCD2004A Control Panel is very much like
@ -172,7 +172,7 @@
#endif // HAS_WIRED_LCD
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#if IS_RRD_SC
//
// Geeetech's LCD2004A Control Panel is very much like
// RepRapDiscount Smart Controller, but adds an FFC40 connector

2
Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h
View file

@ -137,7 +137,7 @@
//
#if HAS_WIRED_LCD
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#if IS_RRD_SC
//
// LCD display on J2 FFC40

13
Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h
View file

@ -126,6 +126,11 @@
#endif
#define LED_PIN PB2
#if HAS_FSMC_TFT || HAS_GRAPHICAL_TFT
#define TFT_CS_PIN PG12 // NE4
#define TFT_RS_PIN PF0 // A0
#endif
#if HAS_FSMC_TFT
/**
* Note: MKS Robin TFT screens use various TFT controllers
@ -141,10 +146,8 @@
*/
//#define LCD_RESET_PIN PF6
#define LCD_BACKLIGHT_PIN PG11
#define FSMC_CS_PIN PG12 // NE4
#define FSMC_RS_PIN PF0 // A0
#define TFT_CS_PIN FSMC_CS_PIN
#define TFT_RS_PIN FSMC_RS_PIN
#define FSMC_CS_PIN TFT_CS_PIN
#define FSMC_RS_PIN TFT_RS_PIN
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_DMA_DEV DMA2
@ -152,8 +155,6 @@
#elif HAS_GRAPHICAL_TFT
#define TFT_RESET_PIN PF6
#define TFT_BACKLIGHT_PIN PG11
#define TFT_CS_PIN PG12 // NE4
#define TFT_RS_PIN PF0 // A0
#endif
#if NEED_TOUCH_PINS

19
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h
View file

@ -269,22 +269,13 @@
#endif
#if ENABLED(SPI_GRAPHICAL_TFT)
#if HAS_SPI_GRAPHICAL_TFT
// Emulated DOGM SPI
#ifndef GRAPHICAL_TFT_UPSCALE
#define GRAPHICAL_TFT_UPSCALE 3
#endif
#ifndef TFT_PIXEL_OFFSET_Y
#define TFT_PIXEL_OFFSET_Y 32
#endif
#define LCD_PINS_ENABLE PD13
#define LCD_PINS_RS PC6
#define BTN_ENC PE13
#define BTN_EN1 PE8
#define BTN_EN2 PE11
#define LCD_PINS_ENABLE PD13
#define LCD_PINS_RS PC6
#elif ENABLED(TFT_480x320_SPI)
#define TFT_DRIVER ST7796
#define TFT_BUFFER_SIZE 14400
@ -304,7 +295,7 @@
#ifndef XPT2046_Y_OFFSET
#define XPT2046_Y_OFFSET -24
#endif
#elif ENABLED(SPI_GRAPHICAL_TFT)
#elif HAS_SPI_GRAPHICAL_TFT
#ifndef XPT2046_X_CALIBRATION
#define XPT2046_X_CALIBRATION -11386
#endif
@ -342,7 +333,7 @@
#else // !MKS_MINI_12864
#define LCD_PINS_D4 PE14
#if ENABLED(ULTIPANEL)
#if IS_ULTIPANEL
#define LCD_PINS_D5 PE15
#define LCD_PINS_D6 PD11
#define LCD_PINS_D7 PD10

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h
View file

@ -154,7 +154,7 @@
#else
#define LCD_PINS_D4 PA6
#if ENABLED(ULTIPANEL)
#if IS_ULTIPANEL
#define LCD_PINS_D5 PA7
#define LCD_PINS_D6 PC4
#define LCD_PINS_D7 PC5

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h
View file

@ -103,7 +103,7 @@
#else // !MKS_MINI_12864
#define LCD_PINS_D4 PC1
#if ENABLED(ULTIPANEL)
#if IS_ULTIPANEL
#define LCD_PINS_D5 -1
#define LCD_PINS_D6 -1
#define LCD_PINS_D7 -1

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h
View file

@ -124,7 +124,7 @@
#else // !MKS_MINI_12864
#define LCD_PINS_D4 PA6
#if ENABLED(ULTIPANEL)
#if IS_ULTIPANEL
#define LCD_PINS_D5 PA7
#define LCD_PINS_D6 PC4
#define LCD_PINS_D7 PC5

75
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h
View file

@ -139,6 +139,35 @@
* If the screen stays white, disable 'LCD_RESET_PIN'
* to let the bootloader init the screen.
*/
#if EITHER(HAS_FSMC_GRAPHICAL_TFT, TFT_320x240)
#define FSMC_CS_PIN PD7 // NE4
#define FSMC_RS_PIN PD11 // A0
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
#define LCD_RESET_PIN PC6 // FSMC_RST
#define LCD_BACKLIGHT_PIN PD13
#endif
#if BOTH(NEED_TOUCH_PINS, HAS_FSMC_GRAPHICAL_TFT) || ENABLED(TFT_320x240)
#define TOUCH_CS_PIN PC2 // SPI2_NSS
#define TOUCH_SCK_PIN PB13 // SPI2_SCK
#define TOUCH_MISO_PIN PB14 // SPI2_MISO
#define TOUCH_MOSI_PIN PB15 // SPI2_MOSI
#endif
#if ENABLED(TFT_320x240) // TFT32/28
#define TFT_DRIVER ILI9341
#define TFT_BUFFER_SIZE 14400
#define ILI9341_COLOR_RGB
// YV for normal screen mounting
#define ILI9341_ORIENTATION ILI9341_MADCTL_MY | ILI9341_MADCTL_MV
// XV for 180° rotated screen mounting
//#define ILI9341_ORIENTATION ILI9341_MADCTL_MX | ILI9341_MADCTL_MV
#endif
#if ENABLED(TOUCH_SCREEN)
#ifndef XPT2046_X_CALIBRATION
#define XPT2046_X_CALIBRATION 12033
@ -154,52 +183,6 @@
#endif
#endif
#if ENABLED(FSMC_GRAPHICAL_TFT)
#define FSMC_CS_PIN PD7 // NE4
#define FSMC_RS_PIN PD11 // A0
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
#define LCD_RESET_PIN PC6 // FSMC_RST
#define LCD_BACKLIGHT_PIN PD13
#if NEED_TOUCH_PINS
#define TOUCH_CS_PIN PC2 // SPI2_NSS
#define TOUCH_SCK_PIN PB13 // SPI2_SCK
#define TOUCH_MISO_PIN PB14 // SPI2_MISO
#define TOUCH_MOSI_PIN PB15 // SPI2_MOSI
#endif
#elif ENABLED(TFT_320x240) //TFT32/28
#define TFT_RESET_PIN PC6
#define TFT_BACKLIGHT_PIN PD13
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_CS_PIN PD7
#define FSMC_RS_PIN PD11
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
#define TOUCH_CS_PIN PC2 // SPI2_NSS
#define TOUCH_SCK_PIN PB13 // SPI2_SCK
#define TOUCH_MISO_PIN PB14 // SPI2_MISO
#define TOUCH_MOSI_PIN PB15 // SPI2_MOSI
#define TFT_DRIVER ILI9341
#define TFT_BUFFER_SIZE 14400
// YV for normal screen mounting
#define ILI9341_ORIENTATION ILI9341_MADCTL_MY | ILI9341_MADCTL_MV
// XV for 180° rotated screen mounting
//#define ILI9341_ORIENTATION ILI9341_MADCTL_MX | ILI9341_MADCTL_MV
#define ILI9341_COLOR_RGB
#endif
#define HAS_SPI_FLASH 1
#if HAS_SPI_FLASH
#define SPI_FLASH_SIZE 0x1000000 // 16MB

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h
View file

@ -198,7 +198,7 @@
#endif
// XPT2046 Touch Screen calibration
#if EITHER(TFT_LVGL_UI_FSMC, TFT_480x320)
#if EITHER(HAS_TFT_LVGL_UI_FSMC, TFT_480x320)
#ifndef XPT2046_X_CALIBRATION
#define XPT2046_X_CALIBRATION 17880
#endif

15
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h
View file

@ -275,20 +275,11 @@
#if ENABLED(TFT_CLASSIC_UI)
// Emulated DOGM SPI
#ifndef GRAPHICAL_TFT_UPSCALE
#define GRAPHICAL_TFT_UPSCALE 3
#endif
#ifndef TFT_PIXEL_OFFSET_Y
#define TFT_PIXEL_OFFSET_Y 32
#endif
#define LCD_PINS_ENABLE PD13
#define LCD_PINS_RS PC6
#define BTN_ENC PE13
#define BTN_EN1 PE8
#define BTN_EN2 PE11
#define LCD_PINS_ENABLE PD13
#define LCD_PINS_RS PC6
#elif ENABLED(TFT_COLOR_UI)
#define TFT_BUFFER_SIZE 14400
#endif
@ -354,7 +345,7 @@
#else // !MKS_MINI_12864
#define LCD_PINS_D4 PE14
#if ENABLED(ULTIPANEL)
#if IS_ULTIPANEL
#define LCD_PINS_D5 PE15
#define LCD_PINS_D6 PD11
#define LCD_PINS_D7 PD10

4
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h
View file

@ -210,7 +210,7 @@
* If the screen stays white, disable 'LCD_RESET_PIN'
* to let the bootloader init the screen.
*/
#if ENABLED(FSMC_GRAPHICAL_TFT)
#if HAS_FSMC_GRAPHICAL_TFT
#define FSMC_CS_PIN PD7 // NE4
#define FSMC_RS_PIN PD11 // A0
@ -254,7 +254,7 @@
#else // !MKS_MINI_12864 && !ENDER2_STOCKDISPLAY
#define LCD_PINS_D4 PF14
#if ENABLED(ULTIPANEL)
#if IS_ULTIPANEL
#define LCD_PINS_D5 PF15
#define LCD_PINS_D6 PF12
#define LCD_PINS_D7 PF13

12
Marlin/src/pins/stm32f1/pins_STM32F1R.h
View file

@ -103,7 +103,7 @@
#define LCD_PINS_RS 49 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock
#elif BOTH(NEWPANEL, PANEL_ONE)
#elif BOTH(IS_NEWPANEL, PANEL_ONE)
#define LCD_PINS_RS PB8
#define LCD_PINS_ENABLE PD2
#define LCD_PINS_D4 PB12
@ -117,7 +117,7 @@
#define LCD_PINS_D5 PB13
#define LCD_PINS_D6 PB14
#define LCD_PINS_D7 PB15
#if DISABLED(NEWPANEL)
#if !IS_NEWPANEL
#define BEEPER_PIN 33
// Buttons attached to a shift register
// Not wired yet
@ -128,9 +128,9 @@
#endif
#endif
#if ENABLED(NEWPANEL)
#if IS_NEWPANEL
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#if IS_RRD_SC
#define BEEPER_PIN 37
@ -231,7 +231,7 @@
#define BEEPER_PIN 33
// Buttons directly attached to AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
#if IS_RRW_KEYPAD
#define BTN_EN1 64
#define BTN_EN2 59
#define BTN_ENC 63
@ -256,6 +256,6 @@
#endif
#endif
#endif // NEWPANEL
#endif // IS_NEWPANEL
#endif // HAS_WIRED_LCD

Some files were not shown because too many files have changed in this diff Show more