zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Add spreadCycle parameter sets (#12645)

Browse source
This commit is contained in:
teemuatlut 2018-12-18 20:42:14 +02:00 committed by Scott Lahteine
parent 902d5b0f8b
commit 7a5e637a37
63 changed files with 813 additions and 186 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

16
Marlin/Configuration_adv.h
View file

@ -1389,10 +1389,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/default/Configuration_adv.h
View file

@ -1389,10 +1389,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Anet/A2/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Anet/A6/Configuration_adv.h
View file

@ -1387,10 +1387,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Anet/A8/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/ArmEd/Configuration_adv.h
View file

@ -1362,10 +1362,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -1387,10 +1387,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -1396,10 +1396,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Cartesio/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Einstart-S/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Felix/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
View file

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
View file

@ -1393,10 +1393,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
View file

@ -1393,10 +1393,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h
View file

@ -1389,10 +1389,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/MakerParts/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
View file

@ -1396,10 +1396,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/RigidBot/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/SCARA/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/TheBorg/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h
View file

@ -1389,10 +1389,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
View file

@ -1401,10 +1401,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
View file

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
View file

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
View file

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
View file

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
View file

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
View file

@ -1363,10 +1363,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h
View file

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h
View file

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/delta/generic/Configuration_adv.h
View file

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
View file

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
View file

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/makibox/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
View file

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/wt150/Configuration_adv.h
View file

@ -1389,10 +1389,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

7
Marlin/src/feature/tmc_util.h
View file

@ -43,6 +43,13 @@
#define TMC_E4_LABEL 'E', '4' #define TMC_E4_LABEL 'E', '4'
#define TMC_E5_LABEL 'E', '5' #define TMC_E5_LABEL 'E', '5'
#define CHOPPER_DEFAULT_12V { 3, -1, 1 }
#define CHOPPER_DEFAULT_19V { 4, 1, 1 }
#define CHOPPER_DEFAULT_24V { 4, 2, 1 }
#define CHOPPER_DEFAULT_36V { 5, 2, 4 }
#define CHOPPER_PRUSAMK3_24V { 4, 1, 4 }
#define CHOPPER_MARLIN_119 { 5, 2, 3 }
template<char AXIS_LETTER, char DRIVER_ID> template<char AXIS_LETTER, char DRIVER_ID>
class TMCStorage { class TMCStorage {
protected: protected: