Add AZSMZ Mini (#8005)
* Add AZSMZ Mini * Remove tabs, adjust spacing * Renumber boards to group by family * Patch up spacing * Tweak
This commit is contained in:
jeffyl
Scott Lahteine
parent
e00ed10c4c
commit
7b3098bbd5
|
|
@ -129,9 +129,9 @@
|
|||
#define BOARD_RAMPS_14_RE_ARM_EFF 1745 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS_14_RE_ARM_EEF 1746 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS_14_RE_ARM_SF 1748 // Re-ARM with RAMPS 1.4 (Power outputs: Spindle, Controller Fan)
|
||||
#define BOARD_STM32F1R 1800 // STM3R Libmaple based stm32f1 controller
|
||||
#define BOARD_MKS_SBASE 1850 // MKS-Sbase (Power outputs: Hotend0, Hotend1, Bed, Fan)
|
||||
|
||||
#define BOARD_MKS_SBASE 1750 // MKS-Sbase (Power outputs: Hotend0, Hotend1, Bed, Fan)
|
||||
#define BOARD_AZSMZ_MINI 1751 // AZSMZ Mini
|
||||
#define BOARD_STM32F1R 1800 // STM3R Libmaple based STM32F1 controller
|
||||
|
||||
|
||||
#define MB(board) (MOTHERBOARD==BOARD_##board)
|
||||
|
|
|
|||
|
|
@ -302,8 +302,10 @@
|
|||
#include "pins_ALLIGATOR_R2.h"
|
||||
#elif MB(STM32F1R)
|
||||
#include "pins_STM32F1R.h"
|
||||
#elif MB(MKS_SBASE)
|
||||
#elif MB(MKS_SBASE)
|
||||
#include "pins_MKS_SBASE.h"
|
||||
#elif MB(AZSMZ_MINI)
|
||||
#include "pins_AZSMZ_MINI.h"
|
||||
#else
|
||||
#error "Unknown MOTHERBOARD value set in Configuration.h"
|
||||
#endif
|
||||
|
|
|
|||
143
Marlin/src/pins/pins_AZSMZ_MINI.h
Normal file
143
Marlin/src/pins/pins_AZSMZ_MINI.h
Normal file
|
|
@ -0,0 +1,143 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* AZSMZ MINI pin assignments
|
||||
*/
|
||||
|
||||
//#if !defined(TARGET_LPC1768)
|
||||
#if DISABLED(IS_REARM)
|
||||
#error "Oops! Make sure you have Re-Arm selected."
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_NAME
|
||||
#define BOARD_NAME "AZSMZ MINI"
|
||||
#endif
|
||||
|
||||
#define LARGE_FLASH true
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN 53
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN 3
|
||||
#define Y_MIN_PIN 14
|
||||
#define Z_MIN_PIN 18
|
||||
#define Z_MAX_PIN 19
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN 26
|
||||
#define X_DIR_PIN 28
|
||||
#define X_ENABLE_PIN 24
|
||||
|
||||
#define Y_STEP_PIN 54
|
||||
#define Y_DIR_PIN 55
|
||||
#define Y_ENABLE_PIN 38
|
||||
|
||||
#define Z_STEP_PIN 60
|
||||
#define Z_DIR_PIN 61
|
||||
#define Z_ENABLE_PIN 56
|
||||
|
||||
#define E0_STEP_PIN 46
|
||||
#define E0_DIR_PIN 48
|
||||
#define E0_ENABLE_PIN 62
|
||||
|
||||
#define E1_STEP_PIN 36
|
||||
#define E1_DIR_PIN 34
|
||||
#define E1_ENABLE_PIN 30
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
// 3.3V max when defined as an analog input
|
||||
//
|
||||
#define TEMP_0_PIN 0 // A0 (TH1)
|
||||
#define TEMP_BED_PIN 1 // A1 (TH2)
|
||||
#define TEMP_1_PIN 2 // A2 (TH3)
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
// EFB
|
||||
#define HEATER_0_PIN 8
|
||||
#define HEATER_BED_PIN 10
|
||||
#define FAN_PIN 9
|
||||
#define FAN1_PIN 63
|
||||
|
||||
#if ENABLED(AZSMZ_12864)
|
||||
#define BEEPER_PIN 37
|
||||
#define DOGLCD_A0 59
|
||||
#define DOGLCD_CS 41
|
||||
#define BTN_EN1 13
|
||||
#define BTN_EN2 15
|
||||
#define BTN_ENC 31
|
||||
#define LCD_SDSS 16
|
||||
#define SD_DETECT_PIN 33
|
||||
#endif
|
||||
|
||||
//
|
||||
// Ethernet pins
|
||||
//
|
||||
#define ENET_MDIO 71
|
||||
#define ENET_RX_ER 73
|
||||
#define ENET_RXD1 75
|
||||
#define ENET_MOC 70
|
||||
#define REF_CLK 72
|
||||
#define ENET_RXD0 74
|
||||
#define ENET_CRS 76
|
||||
#define ENET_TX_EN 77
|
||||
#define ENET_TXD0 78
|
||||
#define ENET_TXD1 79
|
||||
|
||||
/**
|
||||
* PWMs
|
||||
*
|
||||
* There are 6 PWMs. Each PWM can be assigned to one of two pins.
|
||||
*
|
||||
* SERVO2 does NOT have a PWM assigned to it.
|
||||
*
|
||||
* PWM1.1 DIO4 SERVO3_PIN FIL_RUNOUT_PIN 5V output, PWM
|
||||
* PWM1.1 DIO26 E0_STEP_PIN
|
||||
* PWM1.2 DIO11 SERVO0_PIN
|
||||
* PWM1.2 DIO54 X_STEP_PIN
|
||||
* PWM1.3 DIO6 SERVO1_PIN J5-1
|
||||
* PWM1.3 DIO60 Y_STEP_PIN
|
||||
* PWM1.4 DIO53 SDSS(SSEL0) J3-5 AUX-3
|
||||
* PWM1.4 DIO46 Z_STEP_PIN
|
||||
* PWM1.5 DIO3 X_MIN_PIN 10K PULLUP TO 3.3v, 1K SERIES
|
||||
* PWM1.5 DIO9 RAMPS_D9_PIN
|
||||
* PWM1.6 DIO14 Y_MIN_PIN 10K PULLUP TO 3.3v, 1K SERIES
|
||||
* PWM1.6 DIO10 RAMPS_D10_PIN
|
||||
*/
|
||||
|
||||
/**
|
||||
* Special pins
|
||||
* D37 - not 5V tolerant
|
||||
* D49 - not 5V tolerant
|
||||
* D57 - open collector
|
||||
* D58 - open collector
|
||||
*/
|
||||
Loading…
Reference in a new issue