Merge pull request #6057 from thinkyhead/rc_followup_6054
Followup 6054 with some cleanup
This commit is contained in:
Scott Lahteine
GitHub
commit
7cabe81373
|
|
@ -563,6 +563,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -593,10 +597,6 @@
|
|||
// Use double touch for probing
|
||||
//#define PROBE_DOUBLE_TOUCH
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||
//
|
||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||
|
|
@ -843,28 +843,28 @@
|
|||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
||||
#if ENABLED(MANUAL_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
|
|
|
|||
|
|
@ -563,6 +563,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -593,10 +597,6 @@
|
|||
// Use double touch for probing
|
||||
//#define PROBE_DOUBLE_TOUCH
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||
//
|
||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||
|
|
@ -843,28 +843,28 @@
|
|||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
||||
#if ENABLED(MANUAL_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
|
|
|
|||
|
|
@ -546,6 +546,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -576,10 +580,6 @@
|
|||
// Use double touch for probing
|
||||
//#define PROBE_DOUBLE_TOUCH
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||
//
|
||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||
|
|
|
|||
|
|
@ -546,6 +546,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -576,10 +580,6 @@
|
|||
// Use double touch for probing
|
||||
//#define PROBE_DOUBLE_TOUCH
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||
//
|
||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||
|
|
@ -826,28 +826,28 @@
|
|||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
||||
#if ENABLED(MANUAL_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
|
|
|
|||
|
|
@ -555,6 +555,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -585,10 +589,6 @@
|
|||
// Use double touch for probing
|
||||
//#define PROBE_DOUBLE_TOUCH
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||
//
|
||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||
|
|
@ -835,28 +835,28 @@
|
|||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
||||
#if ENABLED(MANUAL_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
|
|
|
|||
|
|
@ -557,6 +557,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -587,10 +591,6 @@
|
|||
// Use double touch for probing
|
||||
//#define PROBE_DOUBLE_TOUCH
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||
//
|
||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||
|
|
@ -837,28 +837,28 @@
|
|||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
||||
#if ENABLED(MANUAL_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
|
|
|
|||
|
|
@ -592,6 +592,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -622,10 +626,6 @@
|
|||
// Use double touch for probing
|
||||
//#define PROBE_DOUBLE_TOUCH
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||
//
|
||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||
|
|
@ -872,28 +872,28 @@
|
|||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
||||
#if ENABLED(MANUAL_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
|
|
|
|||
|
|
@ -563,6 +563,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -593,10 +597,6 @@
|
|||
// Use double touch for probing
|
||||
//#define PROBE_DOUBLE_TOUCH
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||
//
|
||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||
|
|
@ -843,28 +843,28 @@
|
|||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
||||
#if ENABLED(MANUAL_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
|
|
|
|||
|
|
@ -563,6 +563,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -593,10 +597,6 @@
|
|||
// Use double touch for probing
|
||||
//#define PROBE_DOUBLE_TOUCH
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||
//
|
||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||
|
|
@ -843,28 +843,28 @@
|
|||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
||||
#if ENABLED(MANUAL_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
|
|
|
|||
|
|
@ -563,6 +563,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -593,10 +597,6 @@
|
|||
// Use double touch for probing
|
||||
//#define PROBE_DOUBLE_TOUCH
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||
//
|
||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||
|
|
@ -843,28 +843,28 @@
|
|||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
||||
#if ENABLED(MANUAL_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
|
|
|
|||
|
|
@ -562,6 +562,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -592,10 +596,6 @@
|
|||
// Use double touch for probing
|
||||
//#define PROBE_DOUBLE_TOUCH
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||
//
|
||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||
|
|
@ -842,28 +842,28 @@
|
|||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
||||
#if ENABLED(MANUAL_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
|
|
@ -578,6 +578,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -608,10 +612,6 @@
|
|||
// Use double touch for probing
|
||||
//#define PROBE_DOUBLE_TOUCH
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||
//
|
||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||
|
|
@ -858,28 +858,28 @@
|
|||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
||||
#if ENABLED(MANUAL_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
|
|
|
|||
|
|
@ -584,6 +584,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -614,10 +618,6 @@
|
|||
// Use double touch for probing
|
||||
//#define PROBE_DOUBLE_TOUCH
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||
//
|
||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||
|
|
@ -864,28 +864,28 @@
|
|||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
||||
#if ENABLED(MANUAL_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
|
|
|
|||
|
|
@ -555,6 +555,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -585,10 +589,6 @@
|
|||
// Use double touch for probing
|
||||
//#define PROBE_DOUBLE_TOUCH
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||
//
|
||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||
|
|
@ -835,28 +835,28 @@
|
|||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
||||
#if ENABLED(MANUAL_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
|
|
|
|||
|
|
@ -563,6 +563,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -593,10 +597,6 @@
|
|||
// Use double touch for probing
|
||||
//#define PROBE_DOUBLE_TOUCH
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||
//
|
||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||
|
|
@ -843,28 +843,28 @@
|
|||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
||||
#if ENABLED(MANUAL_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
|
|
|
|||
|
|
@ -621,6 +621,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -944,28 +948,28 @@
|
|||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
||||
#if ENABLED(MANUAL_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
|
|
|
|||
|
|
@ -608,6 +608,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -930,28 +934,28 @@
|
|||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
||||
#if ENABLED(MANUAL_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
|
|
|
|||
|
|
@ -608,6 +608,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -934,28 +938,28 @@
|
|||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
||||
#if ENABLED(MANUAL_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
|
|
|
|||
|
|
@ -602,6 +602,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -933,28 +937,28 @@
|
|||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
||||
#if ENABLED(MANUAL_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
|
|
|
|||
|
|
@ -621,6 +621,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -943,28 +947,28 @@
|
|||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
||||
#if ENABLED(MANUAL_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
|
|
|
|||
|
|
@ -566,6 +566,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -596,10 +600,6 @@
|
|||
// Use double touch for probing
|
||||
//#define PROBE_DOUBLE_TOUCH
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||
//
|
||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||
|
|
@ -846,28 +846,28 @@
|
|||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
||||
#if ENABLED(MANUAL_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
|
|
|
|||
|
|
@ -559,6 +559,10 @@
|
|||
//#define Z_PROBE_SLED
|
||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||
// X and Y offsets must be integers.
|
||||
//
|
||||
|
|
@ -589,10 +593,6 @@
|
|||
// Use double touch for probing
|
||||
//#define PROBE_DOUBLE_TOUCH
|
||||
|
||||
//
|
||||
// Allen Key Probe is defined in the Delta example configurations.
|
||||
//
|
||||
|
||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||
//
|
||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||
|
|
@ -839,28 +839,28 @@
|
|||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//=================================== Mesh ==================================
|
||||
//===========================================================================
|
||||
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#define MESH_INSET 10 // Mesh inset margin on print area
|
||||
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define MESH_NUM_Y_POINTS 3
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
|
||||
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
||||
#if ENABLED(MANUAL_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#endif // MANUAL_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
//===========================================================================
|
||||
//========================= Unified Bed Leveling ============================
|
||||
//===========================================================================
|
||||
|
||||
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
|
||||
#define UBL_MESH_NUM_X_POINTS 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
|
|
|
|||
|
|
@ -339,7 +339,7 @@ uint16_t max_display_update_time = 0;
|
|||
if (_menuLineNr == _thisItemNr) { \
|
||||
if (_skipStatic && encoderLine <= _thisItemNr) { \
|
||||
encoderPosition += ENCODER_STEPS_PER_MENU_ITEM; \
|
||||
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; \
|
||||
++encoderLine; \
|
||||
} \
|
||||
if (lcdDrawUpdate) \
|
||||
lcd_implementation_drawmenu_static(_lcdLineNr, PSTR(LABEL), ## __VA_ARGS__); \
|
||||
|
|
@ -2621,7 +2621,7 @@ KeepDrawing:
|
|||
lcd_implementation_hotend_status(_lcdLineNr); \
|
||||
if (_skipStatic && encoderLine <= _thisItemNr) { \
|
||||
encoderPosition += ENCODER_STEPS_PER_MENU_ITEM; \
|
||||
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; \
|
||||
++encoderLine; \
|
||||
} \
|
||||
else \
|
||||
lcdDrawUpdate = LCDVIEW_CALL_NO_REDRAW; \
|
||||
|
|
|
|||
Loading…
Reference in a new issue