Add thermistor 15 tuned for JGAurora A5
This commit is contained in:
parent
582d073de1
commit
7d6c009104
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
@ -1734,9 +1735,9 @@
|
||||||
* LED Type. Enable only one of the following two options.
|
* LED Type. Enable only one of the following two options.
|
||||||
*
|
*
|
||||||
*/
|
*/
|
||||||
|
|
||||||
//#define RGB_LED
|
//#define RGB_LED
|
||||||
//#define RGBW_LED
|
//#define RGBW_LED
|
||||||
|
|
||||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||||
#define RGB_LED_R_PIN 34
|
#define RGB_LED_R_PIN 34
|
||||||
#define RGB_LED_G_PIN 43
|
#define RGB_LED_G_PIN 43
|
||||||
|
|
|
@ -69,7 +69,7 @@
|
||||||
uint8_t xon_xoff_state = XON_XOFF_CHAR_SENT | XON_CHAR;
|
uint8_t xon_xoff_state = XON_XOFF_CHAR_SENT | XON_CHAR;
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
void clear_command_queue();
|
void clear_command_queue();
|
||||||
|
|
||||||
#if ENABLED(SERIAL_STATS_DROPPED_RX)
|
#if ENABLED(SERIAL_STATS_DROPPED_RX)
|
||||||
uint8_t rx_dropped_bytes = 0;
|
uint8_t rx_dropped_bytes = 0;
|
||||||
|
@ -391,7 +391,7 @@
|
||||||
// may be written to rx_buffer_tail, making the buffer appear full rather than empty.
|
// may be written to rx_buffer_tail, making the buffer appear full rather than empty.
|
||||||
CRITICAL_SECTION_START;
|
CRITICAL_SECTION_START;
|
||||||
rx_buffer.head = rx_buffer.tail = 0;
|
rx_buffer.head = rx_buffer.tail = 0;
|
||||||
clear_command_queue();
|
clear_command_queue();
|
||||||
CRITICAL_SECTION_END;
|
CRITICAL_SECTION_END;
|
||||||
|
|
||||||
#if ENABLED(SERIAL_XON_XOFF)
|
#if ENABLED(SERIAL_XON_XOFF)
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
@ -1734,9 +1735,9 @@
|
||||||
* LED Type. Enable only one of the following two options.
|
* LED Type. Enable only one of the following two options.
|
||||||
*
|
*
|
||||||
*/
|
*/
|
||||||
|
|
||||||
//#define RGB_LED
|
//#define RGB_LED
|
||||||
//#define RGBW_LED
|
//#define RGBW_LED
|
||||||
|
|
||||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||||
#define RGB_LED_R_PIN 34
|
#define RGB_LED_R_PIN 34
|
||||||
#define RGB_LED_G_PIN 43
|
#define RGB_LED_G_PIN 43
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -277,6 +277,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
@ -1729,9 +1730,9 @@
|
||||||
* LED Type. Enable only one of the following two options.
|
* LED Type. Enable only one of the following two options.
|
||||||
*
|
*
|
||||||
*/
|
*/
|
||||||
|
|
||||||
//#define RGB_LED
|
//#define RGB_LED
|
||||||
//#define RGBW_LED
|
//#define RGBW_LED
|
||||||
|
|
||||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||||
#define RGB_LED_R_PIN 34
|
#define RGB_LED_R_PIN 34
|
||||||
#define RGB_LED_G_PIN 43
|
#define RGB_LED_G_PIN 43
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -275,6 +275,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -277,6 +277,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -267,6 +267,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -267,6 +267,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -277,6 +277,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -287,6 +287,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
@ -1741,9 +1742,9 @@
|
||||||
* LED Type. Enable only one of the following two options.
|
* LED Type. Enable only one of the following two options.
|
||||||
*
|
*
|
||||||
*/
|
*/
|
||||||
|
|
||||||
//#define RGB_LED
|
//#define RGB_LED
|
||||||
//#define RGBW_LED
|
//#define RGBW_LED
|
||||||
|
|
||||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||||
#define RGB_LED_R_PIN 34
|
#define RGB_LED_R_PIN 34
|
||||||
#define RGB_LED_G_PIN 43
|
#define RGB_LED_G_PIN 43
|
||||||
|
|
|
@ -281,6 +281,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -267,6 +267,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
@ -1707,9 +1708,9 @@
|
||||||
* LED Type. Enable only one of the following two options.
|
* LED Type. Enable only one of the following two options.
|
||||||
*
|
*
|
||||||
*/
|
*/
|
||||||
|
|
||||||
//#define RGB_LED
|
//#define RGB_LED
|
||||||
//#define RGBW_LED
|
//#define RGBW_LED
|
||||||
|
|
||||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||||
#define RGB_LED_R_PIN 34
|
#define RGB_LED_R_PIN 34
|
||||||
#define RGB_LED_G_PIN 43
|
#define RGB_LED_G_PIN 43
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -279,6 +279,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -306,6 +306,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
@ -1737,9 +1738,9 @@
|
||||||
* LED Type. Enable only one of the following two options.
|
* LED Type. Enable only one of the following two options.
|
||||||
*
|
*
|
||||||
*/
|
*/
|
||||||
|
|
||||||
//#define RGB_LED
|
//#define RGB_LED
|
||||||
//#define RGBW_LED
|
//#define RGBW_LED
|
||||||
|
|
||||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||||
#define RGB_LED_R_PIN 34
|
#define RGB_LED_R_PIN 34
|
||||||
#define RGB_LED_G_PIN 43
|
#define RGB_LED_G_PIN 43
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
@ -1734,9 +1735,9 @@
|
||||||
* LED Type. Enable only one of the following two options.
|
* LED Type. Enable only one of the following two options.
|
||||||
*
|
*
|
||||||
*/
|
*/
|
||||||
|
|
||||||
//#define RGB_LED
|
//#define RGB_LED
|
||||||
//#define RGBW_LED
|
//#define RGBW_LED
|
||||||
|
|
||||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||||
#define RGB_LED_R_PIN 34
|
#define RGB_LED_R_PIN 34
|
||||||
#define RGB_LED_G_PIN 43
|
#define RGB_LED_G_PIN 43
|
||||||
|
|
|
@ -298,6 +298,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -267,6 +267,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -267,6 +267,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
@ -1726,9 +1727,9 @@
|
||||||
* LED Type. Enable only one of the following two options.
|
* LED Type. Enable only one of the following two options.
|
||||||
*
|
*
|
||||||
*/
|
*/
|
||||||
|
|
||||||
//#define RGB_LED
|
//#define RGB_LED
|
||||||
//#define RGBW_LED
|
//#define RGBW_LED
|
||||||
|
|
||||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||||
#define RGB_LED_R_PIN 34
|
#define RGB_LED_R_PIN 34
|
||||||
#define RGB_LED_G_PIN 43
|
#define RGB_LED_G_PIN 43
|
||||||
|
|
|
@ -296,6 +296,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -267,6 +267,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -267,6 +267,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -280,6 +280,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -281,6 +281,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -248,6 +248,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
|
@ -276,6 +276,7 @@
|
||||||
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
|
* 15 : 100k thermistor calibration for JGAurora A5 hotend
|
||||||
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
|
|
64
Marlin/src/module/thermistor/thermistor_15.h
Normal file
64
Marlin/src/module/thermistor/thermistor_15.h
Normal file
|
@ -0,0 +1,64 @@
|
||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
// 100k bed thermistor in JGAurora A5. Calibrated by Sam Pinches 21st Jan 2018 using cheap k-type thermocouple inserted into heater block, using TM-902C meter.
|
||||||
|
const short temptable_15[][2] PROGMEM = {
|
||||||
|
{ OV( 31), 275 },
|
||||||
|
{ OV( 33), 270 },
|
||||||
|
{ OV( 35), 260 },
|
||||||
|
{ OV( 38), 253 },
|
||||||
|
{ OV( 41), 248 },
|
||||||
|
{ OV( 48), 239 },
|
||||||
|
{ OV( 56), 232 },
|
||||||
|
{ OV( 66), 222 },
|
||||||
|
{ OV( 78), 212 },
|
||||||
|
{ OV( 93), 206 },
|
||||||
|
{ OV( 106), 199 },
|
||||||
|
{ OV( 118), 191 },
|
||||||
|
{ OV( 130), 186 },
|
||||||
|
{ OV( 158), 176 },
|
||||||
|
{ OV( 187), 167 },
|
||||||
|
{ OV( 224), 158 },
|
||||||
|
{ OV( 270), 148 },
|
||||||
|
{ OV( 321), 137 },
|
||||||
|
{ OV( 379), 127 },
|
||||||
|
{ OV( 446), 117 },
|
||||||
|
{ OV( 518), 106 },
|
||||||
|
{ OV( 593), 96 },
|
||||||
|
{ OV( 668), 86 },
|
||||||
|
{ OV( 739), 76 },
|
||||||
|
{ OV( 767), 72 },
|
||||||
|
{ OV( 830), 62 },
|
||||||
|
{ OV( 902), 48 },
|
||||||
|
{ OV( 926), 45 },
|
||||||
|
{ OV( 955), 35 },
|
||||||
|
{ OV( 966), 30 },
|
||||||
|
{ OV( 977), 25 },
|
||||||
|
{ OV( 985), 20 },
|
||||||
|
{ OV( 993), 15 },
|
||||||
|
{ OV( 999), 10 },
|
||||||
|
{ OV(1004), 5 },
|
||||||
|
{ OV(1008), 0 },
|
||||||
|
{ OV(1012), -5 },
|
||||||
|
{ OV(1016), -10 },
|
||||||
|
{ OV(1020), -15 }
|
||||||
|
};
|
|
@ -79,6 +79,9 @@
|
||||||
#if ANY_THERMISTOR_IS(13) // Hisens thermistor B25/50 =3950 +/-1%
|
#if ANY_THERMISTOR_IS(13) // Hisens thermistor B25/50 =3950 +/-1%
|
||||||
#include "thermistor_13.h"
|
#include "thermistor_13.h"
|
||||||
#endif
|
#endif
|
||||||
|
#if ANY_THERMISTOR_IS(15) // JGAurora A5 thermistor calibration
|
||||||
|
#include "thermistor_15.h"
|
||||||
|
#endif
|
||||||
#if ANY_THERMISTOR_IS(20) // PT100 with INA826 amp on Ultimaker v2.0 electronics
|
#if ANY_THERMISTOR_IS(20) // PT100 with INA826 amp on Ultimaker v2.0 electronics
|
||||||
#include "thermistor_20.h"
|
#include "thermistor_20.h"
|
||||||
#endif
|
#endif
|
||||||
|
|
Loading…
Reference in a new issue