Merge pull request #10742 from thinkyhead/bf2_u8g_code_cleanup
[2.0.x] Prevent compilation of unused u8g-oriented code
This commit is contained in:
Scott Lahteine
GitHub
commit
7edf5bcb7b
102
.travis.yml
102
.travis.yml
|
|
@ -64,7 +64,7 @@ script:
|
|||
- opt_set TEMP_SENSOR_BED 1
|
||||
- opt_set POWER_SUPPLY 1
|
||||
- opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING
|
||||
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS
|
||||
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS PINS_DEBUGGING
|
||||
- opt_enable BLINKM PCA9632 RGB_LED NEOPIXEL_LED AUTO_POWER_CONTROL NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR
|
||||
- opt_enable AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
|
||||
- opt_enable_adv ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS POWER_LOSS_RECOVERY
|
||||
|
|
@ -83,13 +83,15 @@ script:
|
|||
- opt_set TEMP_SENSOR_3 20
|
||||
- opt_set TEMP_SENSOR_4 999
|
||||
- opt_set TEMP_SENSOR_BED 1
|
||||
- opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT EEPROM_SETTINGS EEPROM_CHITCHAT G3D_PANEL SKEW_CORRECTION
|
||||
- opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION
|
||||
- opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
- opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME JUNCTION_DEVIATION
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language
|
||||
#
|
||||
- opt_enable Z_PROBE_SLED SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
|
||||
- opt_set LCD_LANGUAGE jp-kana
|
||||
- opt_disable SEGMENT_LEVELED_MOVES
|
||||
- opt_enable_adv BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
|
|
@ -131,13 +133,13 @@ script:
|
|||
- opt_set_adv I2C_SLAVE_ADDRESS 63
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Mixing Extruder with 5 steppers
|
||||
# Mixing Extruder with 5 steppers, Cyrillic
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
|
||||
- opt_enable MIXING_EXTRUDER CR10_STOCKDISPLAY
|
||||
- opt_set MIXING_STEPPERS 5
|
||||
- opt_set LCD_LANGUAGE jp-kana
|
||||
- opt_set LCD_LANGUAGE ru
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Test DUAL_X_CARRIAGE
|
||||
|
|
@ -152,11 +154,11 @@ script:
|
|||
#
|
||||
# Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D
|
||||
- opt_set LCD_FEEDBACK_FREQUENCY_DURATION_MS 10
|
||||
- opt_set LCD_FEEDBACK_FREQUENCY_HZ 100
|
||||
- opt_enable BQ_LCD_SMART_CONTROLLER SPEAKER
|
||||
#- restore_configs
|
||||
#- opt_set MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D
|
||||
#- opt_set LCD_FEEDBACK_FREQUENCY_DURATION_MS 10
|
||||
#- opt_set LCD_FEEDBACK_FREQUENCY_HZ 100
|
||||
#- opt_enable BQ_LCD_SMART_CONTROLLER SPEAKER
|
||||
#
|
||||
# Test SWITCHING_EXTRUDER
|
||||
#
|
||||
|
|
@ -171,9 +173,9 @@ script:
|
|||
#
|
||||
# Enable COREXY
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable COREXY
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#- restore_configs
|
||||
#- opt_enable COREXY
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Test many less common options
|
||||
#
|
||||
|
|
@ -187,7 +189,7 @@ script:
|
|||
- opt_enable_adv VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL
|
||||
- opt_enable_adv EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
|
||||
- opt_enable_adv MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
|
||||
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER
|
||||
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
|
||||
- opt_enable FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR
|
||||
- opt_enable ENDSTOP_INTERRUPTS_FEATURE FAN_SOFT_PWM SDSUPPORT
|
||||
- opt_enable USE_XMAX_PLUG
|
||||
|
|
@ -197,15 +199,15 @@ script:
|
|||
#
|
||||
# ULTRA_LCD
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable ULTRA_LCD
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#- restore_configs
|
||||
#- opt_enable ULTRA_LCD
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# DOGLCD
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable DOGLCD
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#- restore_configs
|
||||
#- opt_enable DOGLCD
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# MAKRPANEL
|
||||
# Needs to use Melzi and Sanguino hardware
|
||||
|
|
@ -216,27 +218,31 @@ script:
|
|||
#
|
||||
# REPRAP_DISCOUNT_SMART_CONTROLLER, SDSUPPORT, BABYSTEPPING, RIGIDBOARD_V2, and DAC_MOTOR_CURRENT_DEFAULT
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_RIGIDBOARD_V2
|
||||
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_set MOTHERBOARD BOARD_RIGIDBOARD_V2
|
||||
#- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
# #
|
||||
# G3D_PANEL with SDCARD_SORT_ALPHA and STATUS_MESSAGE_SCROLLING
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable G3D_PANEL SDSUPPORT
|
||||
- opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES
|
||||
- opt_set_adv SDSORT_GCODE true
|
||||
- opt_set_adv SDSORT_USES_RAM true
|
||||
- opt_set_adv SDSORT_USES_STACK true
|
||||
- opt_set_adv SDSORT_CACHE_NAMES true
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#- restore_configs
|
||||
#- opt_enable G3D_PANEL SDSUPPORT
|
||||
#- opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES
|
||||
#- opt_set_adv SDSORT_GCODE true
|
||||
#- opt_set_adv SDSORT_USES_RAM true
|
||||
#- opt_set_adv SDSORT_USES_STACK true
|
||||
#- opt_set_adv SDSORT_CACHE_NAMES true
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER with SDCARD_SORT_ALPHA and STATUS_MESSAGE_SCROLLING
|
||||
# REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER with LIGHTWEIGHT_UI
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
|
||||
- opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI
|
||||
- opt_set_adv SDSORT_GCODE true
|
||||
- opt_set_adv SDSORT_USES_RAM true
|
||||
- opt_set_adv SDSORT_USES_STACK true
|
||||
- opt_set_adv SDSORT_CACHE_NAMES true
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# REPRAPWORLD_KEYPAD
|
||||
|
|
@ -248,9 +254,9 @@ script:
|
|||
#
|
||||
# RA_CONTROL_PANEL
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable RA_CONTROL_PANEL PINS_DEBUGGING
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#- restore_configs
|
||||
#- opt_enable RA_CONTROL_PANEL PINS_DEBUGGING
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
######## I2C LCD/PANELS ##############
|
||||
#
|
||||
|
|
@ -278,19 +284,19 @@ script:
|
|||
#
|
||||
# LCM1602
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable LCM1602
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#- restore_configs
|
||||
#- opt_enable LCM1602
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Language files test with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
|
||||
- for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}; done
|
||||
#- restore_configs
|
||||
#- opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
|
||||
#- for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}; done
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT
|
||||
- for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}; done
|
||||
#- restore_configs
|
||||
#- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT
|
||||
#- for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}; done
|
||||
#
|
||||
#
|
||||
######## Example Configurations ##############
|
||||
|
|
@ -308,8 +314,8 @@ script:
|
|||
# Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS
|
||||
#
|
||||
- use_example_configs delta/generic
|
||||
- opt_disable DISABLE_MIN_ENDSTOPS
|
||||
- opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY
|
||||
- opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT
|
||||
- opt_enable OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Delta Config (FLSUN AC because it's complex)
|
||||
|
|
@ -325,7 +331,7 @@ script:
|
|||
# SCARA with TMC2130
|
||||
#
|
||||
- use_example_configs SCARA
|
||||
- opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER SCARA_FEEDRATE_SCALING
|
||||
- opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER
|
||||
- opt_enable_adv HAVE_TMC2130 X_IS_TMC2130 Y_IS_TMC2130 Z_IS_TMC2130
|
||||
- opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD SENSORLESS_HOMING
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
|
|
|
|||
|
|
@ -56,108 +56,106 @@
|
|||
|
||||
*/
|
||||
|
||||
|
||||
#ifdef __SAM3X8E__
|
||||
|
||||
// #include <inttypes.h>
|
||||
#include "../../inc/MarlinConfigPre.h"
|
||||
|
||||
#if ENABLED(DOGLCD)
|
||||
|
||||
#include <U8glib.h>
|
||||
|
||||
// #include "src/core/macros.h"
|
||||
// #include "Configuration.h"
|
||||
#include "../../Marlin.h"
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
|
||||
#include <U8glib.h>
|
||||
#define SPI_FULL_SPEED 0
|
||||
#define SPI_HALF_SPEED 1
|
||||
#define SPI_QUARTER_SPEED 2
|
||||
#define SPI_EIGHTH_SPEED 3
|
||||
#define SPI_SIXTEENTH_SPEED 4
|
||||
#define SPI_SPEED_5 5
|
||||
#define SPI_SPEED_6 6
|
||||
|
||||
#define SPI_FULL_SPEED 0
|
||||
#define SPI_HALF_SPEED 1
|
||||
#define SPI_QUARTER_SPEED 2
|
||||
#define SPI_EIGHTH_SPEED 3
|
||||
#define SPI_SIXTEENTH_SPEED 4
|
||||
#define SPI_SPEED_5 5
|
||||
#define SPI_SPEED_6 6
|
||||
void spiBegin();
|
||||
void spiInit(uint8_t spiRate);
|
||||
void spiSend(uint8_t b);
|
||||
void spiSend(const uint8_t* buf, size_t n);
|
||||
|
||||
void spiBegin();
|
||||
void spiInit(uint8_t spiRate);
|
||||
void spiSend(uint8_t b);
|
||||
void spiSend(const uint8_t* buf, size_t n);
|
||||
#include <Arduino.h>
|
||||
#include "fastio_Due.h"
|
||||
|
||||
#include <Arduino.h>
|
||||
#include "../../core/macros.h"
|
||||
#include "fastio_Due.h"
|
||||
void u8g_SetPIOutput_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index) {
|
||||
PIO_Configure(g_APinDescription[u8g->pin_list[pin_index]].pPort, PIO_OUTPUT_1,
|
||||
g_APinDescription[u8g->pin_list[pin_index]].ulPin, g_APinDescription[u8g->pin_list[pin_index]].ulPinConfiguration); // OUTPUT
|
||||
}
|
||||
|
||||
void u8g_SetPILevel_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index, uint8_t level) {
|
||||
volatile Pio* port = g_APinDescription[u8g->pin_list[pin_index]].pPort;
|
||||
uint32_t mask = g_APinDescription[u8g->pin_list[pin_index]].ulPin;
|
||||
if (level) port->PIO_SODR = mask;
|
||||
else port->PIO_CODR = mask;
|
||||
}
|
||||
|
||||
void u8g_SetPIOutput_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index) {
|
||||
PIO_Configure(g_APinDescription[u8g->pin_list[pin_index]].pPort, PIO_OUTPUT_1,
|
||||
g_APinDescription[u8g->pin_list[pin_index]].ulPin, g_APinDescription[u8g->pin_list[pin_index]].ulPinConfiguration); // OUTPUT
|
||||
}
|
||||
|
||||
void u8g_SetPILevel_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index, uint8_t level) {
|
||||
volatile Pio* port = g_APinDescription[u8g->pin_list[pin_index]].pPort;
|
||||
uint32_t mask = g_APinDescription[u8g->pin_list[pin_index]].ulPin;
|
||||
if (level) port->PIO_SODR = mask;
|
||||
else port->PIO_CODR = mask;
|
||||
}
|
||||
|
||||
uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
|
||||
uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
|
||||
{
|
||||
switch(msg)
|
||||
{
|
||||
switch(msg)
|
||||
{
|
||||
case U8G_COM_MSG_STOP:
|
||||
break;
|
||||
case U8G_COM_MSG_STOP:
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_INIT:
|
||||
u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_CS, 1);
|
||||
u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_A0, 1);
|
||||
case U8G_COM_MSG_INIT:
|
||||
u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_CS, 1);
|
||||
u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_A0, 1);
|
||||
|
||||
u8g_SetPIOutput_DUE_hw_spi(u8g, U8G_PI_CS);
|
||||
u8g_SetPIOutput_DUE_hw_spi(u8g, U8G_PI_A0);
|
||||
u8g_SetPIOutput_DUE_hw_spi(u8g, U8G_PI_CS);
|
||||
u8g_SetPIOutput_DUE_hw_spi(u8g, U8G_PI_A0);
|
||||
|
||||
u8g_Delay(5);
|
||||
u8g_Delay(5);
|
||||
|
||||
spiBegin();
|
||||
spiBegin();
|
||||
|
||||
#ifndef SPI_SPEED
|
||||
#define SPI_SPEED SPI_FULL_SPEED // use same SPI speed as SD card
|
||||
#endif
|
||||
spiInit(2);
|
||||
#ifndef SPI_SPEED
|
||||
#define SPI_SPEED SPI_FULL_SPEED // use same SPI speed as SD card
|
||||
#endif
|
||||
spiInit(2);
|
||||
|
||||
break;
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
|
||||
u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_A0, arg_val);
|
||||
break;
|
||||
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
|
||||
u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_A0, arg_val);
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_CHIP_SELECT:
|
||||
u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_CS, (arg_val ? 0 : 1));
|
||||
break;
|
||||
case U8G_COM_MSG_CHIP_SELECT:
|
||||
u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_CS, (arg_val ? 0 : 1));
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_RESET:
|
||||
break;
|
||||
case U8G_COM_MSG_RESET:
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_WRITE_BYTE:
|
||||
case U8G_COM_MSG_WRITE_BYTE:
|
||||
|
||||
spiSend((uint8_t)arg_val);
|
||||
break;
|
||||
spiSend((uint8_t)arg_val);
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_WRITE_SEQ: {
|
||||
uint8_t *ptr = (uint8_t*) arg_ptr;
|
||||
while (arg_val > 0) {
|
||||
spiSend(*ptr++);
|
||||
arg_val--;
|
||||
}
|
||||
case U8G_COM_MSG_WRITE_SEQ: {
|
||||
uint8_t *ptr = (uint8_t*) arg_ptr;
|
||||
while (arg_val > 0) {
|
||||
spiSend(*ptr++);
|
||||
arg_val--;
|
||||
}
|
||||
break;
|
||||
}
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_WRITE_SEQ_P: {
|
||||
uint8_t *ptr = (uint8_t*) arg_ptr;
|
||||
while (arg_val > 0) {
|
||||
spiSend(*ptr++);
|
||||
arg_val--;
|
||||
}
|
||||
case U8G_COM_MSG_WRITE_SEQ_P: {
|
||||
uint8_t *ptr = (uint8_t*) arg_ptr;
|
||||
while (arg_val > 0) {
|
||||
spiSend(*ptr++);
|
||||
arg_val--;
|
||||
}
|
||||
break;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
break;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
#endif //__SAM3X8E__
|
||||
|
|
|
|||
|
|
@ -55,9 +55,12 @@
|
|||
|
||||
#ifdef ARDUINO_ARCH_SAM
|
||||
|
||||
#include "../../inc/MarlinConfigPre.h"
|
||||
|
||||
#if ENABLED(DOGLCD)
|
||||
|
||||
#include <U8glib.h>
|
||||
#include <Arduino.h>
|
||||
#include "../../core/macros.h"
|
||||
#include "../Delay.h"
|
||||
|
||||
void u8g_SetPIOutput_DUE(u8g_t *u8g, uint8_t pin_index) {
|
||||
|
|
@ -177,4 +180,6 @@ uint8_t u8g_com_HAL_DUE_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
|
|||
return 1;
|
||||
}
|
||||
|
||||
#endif //ARDUINO_ARCH_SAM
|
||||
#endif // DOGLCD
|
||||
|
||||
#endif // ARDUINO_ARCH_SAM
|
||||
|
|
|
|||
|
|
@ -55,11 +55,11 @@
|
|||
|
||||
#ifdef TARGET_LPC1768
|
||||
|
||||
#include "../../inc/MarlinConfigPre.h"
|
||||
|
||||
#if ENABLED(DOGLCD)
|
||||
|
||||
//#include <inttypes.h>
|
||||
|
||||
//#include "src/core/macros.h"
|
||||
//#include "Configuration.h"
|
||||
|
||||
#include <U8glib.h>
|
||||
|
||||
#define SPI_FULL_SPEED 0
|
||||
|
|
@ -132,4 +132,6 @@ uint8_t u8g_com_HAL_LPC1768_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
|
|||
return 1;
|
||||
}
|
||||
|
||||
#endif //TARGET_LPC1768
|
||||
#endif // DOGLCD
|
||||
|
||||
#endif // TARGET_LPC1768
|
||||
|
|
|
|||
|
|
@ -77,113 +77,119 @@
|
|||
|
||||
#ifdef TARGET_LPC1768
|
||||
|
||||
#include <U8glib.h>
|
||||
#include "../../inc/MarlinConfigPre.h"
|
||||
|
||||
#define I2C_SLA (0x3C*2)
|
||||
//#define I2C_CMD_MODE 0x080
|
||||
#define I2C_CMD_MODE 0x000
|
||||
#define I2C_DATA_MODE 0x040
|
||||
#if ENABLED(DOGLCD)
|
||||
|
||||
//#define U8G_I2C_OPT_FAST 16
|
||||
#include <U8glib.h>
|
||||
|
||||
uint8_t u8g_com_ssd_I2C_start_sequence(u8g_t *u8g) {
|
||||
/* are we requested to set the a0 state? */
|
||||
if (u8g->pin_list[U8G_PI_SET_A0] == 0) return 1;
|
||||
#define I2C_SLA (0x3C*2)
|
||||
//#define I2C_CMD_MODE 0x080
|
||||
#define I2C_CMD_MODE 0x000
|
||||
#define I2C_DATA_MODE 0x040
|
||||
|
||||
/* setup bus, might be a repeated start */
|
||||
if (u8g_i2c_start(I2C_SLA) == 0)
|
||||
return 0;
|
||||
if (u8g->pin_list[U8G_PI_A0_STATE] == 0 ) {
|
||||
if (u8g_i2c_send_byte(I2C_CMD_MODE) == 0) return 0;
|
||||
}
|
||||
else if (u8g_i2c_send_byte(I2C_DATA_MODE) == 0)
|
||||
return 0;
|
||||
//#define U8G_I2C_OPT_FAST 16
|
||||
|
||||
u8g->pin_list[U8G_PI_SET_A0] = 0;
|
||||
return 1;
|
||||
uint8_t u8g_com_ssd_I2C_start_sequence(u8g_t *u8g) {
|
||||
/* are we requested to set the a0 state? */
|
||||
if (u8g->pin_list[U8G_PI_SET_A0] == 0) return 1;
|
||||
|
||||
/* setup bus, might be a repeated start */
|
||||
if (u8g_i2c_start(I2C_SLA) == 0)
|
||||
return 0;
|
||||
if (u8g->pin_list[U8G_PI_A0_STATE] == 0 ) {
|
||||
if (u8g_i2c_send_byte(I2C_CMD_MODE) == 0) return 0;
|
||||
}
|
||||
else if (u8g_i2c_send_byte(I2C_DATA_MODE) == 0)
|
||||
return 0;
|
||||
|
||||
uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
|
||||
switch(msg) {
|
||||
case U8G_COM_MSG_INIT:
|
||||
//u8g_com_arduino_digital_write(u8g, U8G_PI_SCL, HIGH);
|
||||
//u8g_com_arduino_digital_write(u8g, U8G_PI_SDA, HIGH);
|
||||
//u8g->pin_list[U8G_PI_A0_STATE] = 0; /* inital RS state: unknown mode */
|
||||
u8g->pin_list[U8G_PI_SET_A0] = 0;
|
||||
return 1;
|
||||
}
|
||||
|
||||
u8g_i2c_init(u8g->pin_list[U8G_PI_I2C_OPTION]);
|
||||
u8g_com_ssd_I2C_start_sequence(u8g);
|
||||
break;
|
||||
uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
|
||||
switch(msg) {
|
||||
case U8G_COM_MSG_INIT:
|
||||
//u8g_com_arduino_digital_write(u8g, U8G_PI_SCL, HIGH);
|
||||
//u8g_com_arduino_digital_write(u8g, U8G_PI_SDA, HIGH);
|
||||
//u8g->pin_list[U8G_PI_A0_STATE] = 0; /* inital RS state: unknown mode */
|
||||
|
||||
case U8G_COM_MSG_STOP:
|
||||
break;
|
||||
u8g_i2c_init(u8g->pin_list[U8G_PI_I2C_OPTION]);
|
||||
u8g_com_ssd_I2C_start_sequence(u8g);
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_RESET:
|
||||
/* Currently disabled, but it could be enable. Previous restrictions have been removed */
|
||||
/* u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val); */
|
||||
break;
|
||||
case U8G_COM_MSG_STOP:
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_CHIP_SELECT:
|
||||
u8g->pin_list[U8G_PI_A0_STATE] = 0;
|
||||
u8g->pin_list[U8G_PI_SET_A0] = 1; /* force a0 to set again, also forces start condition */
|
||||
if (arg_val == 0 ) {
|
||||
/* disable chip, send stop condition */
|
||||
u8g_i2c_stop();
|
||||
case U8G_COM_MSG_RESET:
|
||||
/* Currently disabled, but it could be enable. Previous restrictions have been removed */
|
||||
/* u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val); */
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_CHIP_SELECT:
|
||||
u8g->pin_list[U8G_PI_A0_STATE] = 0;
|
||||
u8g->pin_list[U8G_PI_SET_A0] = 1; /* force a0 to set again, also forces start condition */
|
||||
if (arg_val == 0 ) {
|
||||
/* disable chip, send stop condition */
|
||||
u8g_i2c_stop();
|
||||
}
|
||||
else {
|
||||
/* enable, do nothing: any byte writing will trigger the i2c start */
|
||||
}
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_WRITE_BYTE:
|
||||
//u8g->pin_list[U8G_PI_SET_A0] = 1;
|
||||
//if (u8g_com_arduino_ssd_start_sequence(u8g) == 0)
|
||||
// return u8g_i2c_stop(), 0;
|
||||
if (u8g_i2c_send_byte(arg_val) == 0)
|
||||
return u8g_i2c_stop(), 0;
|
||||
// u8g_i2c_stop();
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_WRITE_SEQ: {
|
||||
//u8g->pin_list[U8G_PI_SET_A0] = 1;
|
||||
if (u8g_com_ssd_I2C_start_sequence(u8g) == 0)
|
||||
return u8g_i2c_stop(), 0;
|
||||
|
||||
register uint8_t *ptr = (uint8_t *)arg_ptr;
|
||||
while (arg_val > 0) {
|
||||
if (u8g_i2c_send_byte(*ptr++) == 0)
|
||||
return u8g_i2c_stop(), 0;
|
||||
arg_val--;
|
||||
}
|
||||
else {
|
||||
/* enable, do nothing: any byte writing will trigger the i2c start */
|
||||
}
|
||||
break;
|
||||
}
|
||||
// u8g_i2c_stop();
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_WRITE_BYTE:
|
||||
//u8g->pin_list[U8G_PI_SET_A0] = 1;
|
||||
//if (u8g_com_arduino_ssd_start_sequence(u8g) == 0)
|
||||
// return u8g_i2c_stop(), 0;
|
||||
if (u8g_i2c_send_byte(arg_val) == 0)
|
||||
return u8g_i2c_stop(), 0;
|
||||
// u8g_i2c_stop();
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_WRITE_SEQ: {
|
||||
case U8G_COM_MSG_WRITE_SEQ_P: {
|
||||
//u8g->pin_list[U8G_PI_SET_A0] = 1;
|
||||
if (u8g_com_ssd_I2C_start_sequence(u8g) == 0)
|
||||
return u8g_i2c_stop(), 0;
|
||||
|
||||
register uint8_t *ptr = (uint8_t *)arg_ptr;
|
||||
while (arg_val > 0) {
|
||||
if (u8g_i2c_send_byte(*ptr++) == 0)
|
||||
return u8g_i2c_stop(), 0;
|
||||
arg_val--;
|
||||
}
|
||||
register uint8_t *ptr = (uint8_t *)arg_ptr;
|
||||
while (arg_val > 0) {
|
||||
if (u8g_i2c_send_byte(u8g_pgm_read(ptr)) == 0)
|
||||
return 0;
|
||||
ptr++;
|
||||
arg_val--;
|
||||
}
|
||||
// u8g_i2c_stop();
|
||||
break;
|
||||
}
|
||||
// u8g_i2c_stop();
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_WRITE_SEQ_P: {
|
||||
//u8g->pin_list[U8G_PI_SET_A0] = 1;
|
||||
if (u8g_com_ssd_I2C_start_sequence(u8g) == 0)
|
||||
return u8g_i2c_stop(), 0;
|
||||
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
|
||||
u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
|
||||
u8g->pin_list[U8G_PI_SET_A0] = 1; /* force a0 to set again */
|
||||
|
||||
register uint8_t *ptr = (uint8_t *)arg_ptr;
|
||||
while (arg_val > 0) {
|
||||
if (u8g_i2c_send_byte(u8g_pgm_read(ptr)) == 0)
|
||||
return 0;
|
||||
ptr++;
|
||||
arg_val--;
|
||||
}
|
||||
}
|
||||
// u8g_i2c_stop();
|
||||
break;
|
||||
u8g_i2c_start(0); // send slave address and write bit
|
||||
u8g_i2c_send_byte(arg_val ? 0x40 : 0x80); // Write to ? Graphics DRAM mode : Command mode
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
|
||||
u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
|
||||
u8g->pin_list[U8G_PI_SET_A0] = 1; /* force a0 to set again */
|
||||
} // switch
|
||||
return 1;
|
||||
}
|
||||
|
||||
u8g_i2c_start(0); // send slave address and write bit
|
||||
u8g_i2c_send_byte(arg_val ? 0x40 : 0x80); // Write to ? Graphics DRAM mode : Command mode
|
||||
break;
|
||||
|
||||
} // switch
|
||||
return 1;
|
||||
}
|
||||
#endif // DOGLCD
|
||||
|
||||
#endif // TARGET_LPC1768
|
||||
|
|
|
|||
|
|
@ -61,16 +61,20 @@
|
|||
|
||||
#ifdef TARGET_LPC1768
|
||||
|
||||
#include <U8glib.h>
|
||||
#include "../../inc/MarlinConfigPre.h"
|
||||
|
||||
#if ENABLED(DOGLCD)
|
||||
|
||||
#include <U8glib.h>
|
||||
|
||||
//void pinMode(int16_t pin, uint8_t mode);
|
||||
//void digitalWrite(int16_t pin, uint8_t pin_status);
|
||||
|
||||
|
||||
#define I2C_SLA (0x3C*2)
|
||||
//#define I2C_CMD_MODE 0x080
|
||||
#define I2C_CMD_MODE 0x000
|
||||
#define I2C_DATA_MODE 0x040
|
||||
#define I2C_SLA (0x3C*2)
|
||||
//#define I2C_CMD_MODE 0x080
|
||||
#define I2C_CMD_MODE 0x000
|
||||
#define I2C_DATA_MODE 0x040
|
||||
|
||||
//static uint8_t I2C_speed; // 3 - 400KHz, 13 - 100KHz
|
||||
//#define SPEED_400KHz 3
|
||||
|
|
@ -245,4 +249,6 @@ uint8_t u8g_com_HAL_LPC1768_ssd_sw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_v
|
|||
return 1;
|
||||
}
|
||||
|
||||
#endif // TARGET_LPC1768
|
||||
#endif // DOGLCD
|
||||
|
||||
#endif // TARGET_LPC1768
|
||||
|
|
|
|||
|
|
@ -55,103 +55,100 @@
|
|||
|
||||
#ifdef TARGET_LPC1768
|
||||
|
||||
//#include <inttypes.h>
|
||||
//#include "src/core/macros.h"
|
||||
//#include "Configuration.h"
|
||||
#include "../../inc/MarlinConfigPre.h"
|
||||
|
||||
#include <U8glib.h>
|
||||
#include "../Delay.h"
|
||||
#if ENABLED(DOGLCD)
|
||||
|
||||
#define SPI_FULL_SPEED 0
|
||||
#define SPI_HALF_SPEED 1
|
||||
#define SPI_QUARTER_SPEED 2
|
||||
#define SPI_EIGHTH_SPEED 3
|
||||
#define SPI_SIXTEENTH_SPEED 4
|
||||
#define SPI_SPEED_5 5
|
||||
#define SPI_SPEED_6 6
|
||||
//#include <inttypes.h>
|
||||
#include <U8glib.h>
|
||||
#include "../Delay.h"
|
||||
|
||||
#define SPI_FULL_SPEED 0
|
||||
#define SPI_HALF_SPEED 1
|
||||
#define SPI_QUARTER_SPEED 2
|
||||
#define SPI_EIGHTH_SPEED 3
|
||||
#define SPI_SIXTEENTH_SPEED 4
|
||||
#define SPI_SPEED_5 5
|
||||
#define SPI_SPEED_6 6
|
||||
|
||||
void spiBegin();
|
||||
void spiInit(uint8_t spiRate);
|
||||
void spiSend(uint8_t b);
|
||||
void spiSend(const uint8_t* buf, size_t n);
|
||||
void spiBegin();
|
||||
void spiInit(uint8_t spiRate);
|
||||
void spiSend(uint8_t b);
|
||||
void spiSend(const uint8_t* buf, size_t n);
|
||||
|
||||
static uint8_t rs_last_state = 255;
|
||||
|
||||
static uint8_t rs_last_state = 255;
|
||||
static void u8g_com_LPC1768_st7920_write_byte_hw_spi(uint8_t rs, uint8_t val) {
|
||||
uint8_t i;
|
||||
|
||||
static void u8g_com_LPC1768_st7920_write_byte_hw_spi(uint8_t rs, uint8_t val)
|
||||
{
|
||||
uint8_t i;
|
||||
if ( rs != rs_last_state) { // time to send a command/data byte
|
||||
rs_last_state = rs;
|
||||
|
||||
if ( rs != rs_last_state) { // time to send a command/data byte
|
||||
rs_last_state = rs;
|
||||
if ( rs == 0 )
|
||||
/* command */
|
||||
spiSend(0x0F8);
|
||||
else
|
||||
/* data */
|
||||
spiSend(0x0FA);
|
||||
|
||||
if ( rs == 0 )
|
||||
/* command */
|
||||
spiSend(0x0F8);
|
||||
else
|
||||
/* data */
|
||||
spiSend(0x0FA);
|
||||
|
||||
DELAY_US(40); // give the controller some time to process the data: 20 is bad, 30 is OK, 40 is safe
|
||||
}
|
||||
|
||||
spiSend(val & 0x0F0);
|
||||
spiSend(val << 4);
|
||||
DELAY_US(40); // give the controller some time to process the data: 20 is bad, 30 is OK, 40 is safe
|
||||
}
|
||||
|
||||
spiSend(val & 0x0F0);
|
||||
spiSend(val << 4);
|
||||
}
|
||||
|
||||
uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
|
||||
{
|
||||
switch(msg)
|
||||
{
|
||||
case U8G_COM_MSG_INIT:
|
||||
u8g_SetPILevel(u8g, U8G_PI_CS, 0);
|
||||
u8g_SetPIOutput(u8g, U8G_PI_CS);
|
||||
u8g_Delay(5);
|
||||
spiBegin();
|
||||
spiInit(SPI_EIGHTH_SPEED); // ST7920 max speed is about 1.1 MHz
|
||||
u8g->pin_list[U8G_PI_A0_STATE] = 0; /* inital RS state: command mode */
|
||||
break;
|
||||
uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
|
||||
switch(msg) {
|
||||
case U8G_COM_MSG_INIT:
|
||||
u8g_SetPILevel(u8g, U8G_PI_CS, 0);
|
||||
u8g_SetPIOutput(u8g, U8G_PI_CS);
|
||||
u8g_Delay(5);
|
||||
spiBegin();
|
||||
spiInit(SPI_EIGHTH_SPEED); // ST7920 max speed is about 1.1 MHz
|
||||
u8g->pin_list[U8G_PI_A0_STATE] = 0; /* inital RS state: command mode */
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_STOP:
|
||||
break;
|
||||
case U8G_COM_MSG_STOP:
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_RESET:
|
||||
u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
|
||||
break;
|
||||
case U8G_COM_MSG_RESET:
|
||||
u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
|
||||
u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
|
||||
break;
|
||||
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
|
||||
u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_CHIP_SELECT:
|
||||
u8g_SetPILevel(u8g, U8G_PI_CS, arg_val); //note: the st7920 has an active high chip select
|
||||
break;
|
||||
case U8G_COM_MSG_CHIP_SELECT:
|
||||
u8g_SetPILevel(u8g, U8G_PI_CS, arg_val); //note: the st7920 has an active high chip select
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_WRITE_BYTE:
|
||||
u8g_com_LPC1768_st7920_write_byte_hw_spi(u8g->pin_list[U8G_PI_A0_STATE], arg_val);
|
||||
break;
|
||||
case U8G_COM_MSG_WRITE_BYTE:
|
||||
u8g_com_LPC1768_st7920_write_byte_hw_spi(u8g->pin_list[U8G_PI_A0_STATE], arg_val);
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_WRITE_SEQ: {
|
||||
uint8_t *ptr = (uint8_t*) arg_ptr;
|
||||
while (arg_val > 0) {
|
||||
u8g_com_LPC1768_st7920_write_byte_hw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
|
||||
arg_val--;
|
||||
}
|
||||
case U8G_COM_MSG_WRITE_SEQ: {
|
||||
uint8_t *ptr = (uint8_t*) arg_ptr;
|
||||
while (arg_val > 0) {
|
||||
u8g_com_LPC1768_st7920_write_byte_hw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
|
||||
arg_val--;
|
||||
}
|
||||
break;
|
||||
}
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_WRITE_SEQ_P: {
|
||||
uint8_t *ptr = (uint8_t*) arg_ptr;
|
||||
while (arg_val > 0) {
|
||||
u8g_com_LPC1768_st7920_write_byte_hw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
|
||||
arg_val--;
|
||||
}
|
||||
case U8G_COM_MSG_WRITE_SEQ_P: {
|
||||
uint8_t *ptr = (uint8_t*) arg_ptr;
|
||||
while (arg_val > 0) {
|
||||
u8g_com_LPC1768_st7920_write_byte_hw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
|
||||
arg_val--;
|
||||
}
|
||||
break;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
break;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
#endif // TARGET_LPC1768
|
||||
#endif // DOGLCD
|
||||
|
||||
#endif // TARGET_LPC1768
|
||||
|
|
|
|||
|
|
@ -55,97 +55,102 @@
|
|||
|
||||
#ifdef TARGET_LPC1768
|
||||
|
||||
#include <U8glib.h>
|
||||
#include "SoftwareSPI.h"
|
||||
#include "../Delay.h"
|
||||
#include "../../inc/MarlinConfigPre.h"
|
||||
|
||||
#define SPI_SPEED 3 // About 1 MHz
|
||||
#if ENABLED(DOGLCD)
|
||||
|
||||
static pin_t SCK_pin_ST7920_HAL, MOSI_pin_ST7920_HAL_HAL;
|
||||
static uint8_t SPI_speed = 0;
|
||||
static uint8_t rs_last_state = 255;
|
||||
#include <U8glib.h>
|
||||
#include "SoftwareSPI.h"
|
||||
#include "../Delay.h"
|
||||
|
||||
static void u8g_com_LPC1768_st7920_write_byte_sw_spi(uint8_t rs, uint8_t val)
|
||||
{
|
||||
uint8_t i;
|
||||
#define SPI_SPEED 3 // About 1 MHz
|
||||
|
||||
if ( rs != rs_last_state) { // time to send a command/data byte
|
||||
rs_last_state = rs;
|
||||
static pin_t SCK_pin_ST7920_HAL, MOSI_pin_ST7920_HAL_HAL;
|
||||
static uint8_t SPI_speed = 0;
|
||||
static uint8_t rs_last_state = 255;
|
||||
|
||||
if ( rs == 0 )
|
||||
/* command */
|
||||
swSpiTransfer(0x0F8, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL);
|
||||
else
|
||||
/* data */
|
||||
swSpiTransfer(0x0FA, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL);
|
||||
static void u8g_com_LPC1768_st7920_write_byte_sw_spi(uint8_t rs, uint8_t val) {
|
||||
uint8_t i;
|
||||
|
||||
DELAY_US(40); // give the controller some time to process the data: 20 is bad, 30 is OK, 40 is safe
|
||||
}
|
||||
if (rs != rs_last_state) { // time to send a command/data byte
|
||||
rs_last_state = rs;
|
||||
|
||||
swSpiTransfer(val & 0x0F0, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL);
|
||||
swSpiTransfer(val << 4, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL);
|
||||
if (rs == 0)
|
||||
/* command */
|
||||
swSpiTransfer(0x0F8, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL);
|
||||
else
|
||||
/* data */
|
||||
swSpiTransfer(0x0FA, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL);
|
||||
|
||||
DELAY_US(40); // give the controller some time to process the data: 20 is bad, 30 is OK, 40 is safe
|
||||
}
|
||||
|
||||
uint8_t u8g_com_HAL_LPC1768_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
|
||||
swSpiTransfer(val & 0x0F0, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL);
|
||||
swSpiTransfer(val << 4, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL);
|
||||
}
|
||||
|
||||
uint8_t u8g_com_HAL_LPC1768_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
|
||||
{
|
||||
switch(msg)
|
||||
{
|
||||
switch(msg)
|
||||
{
|
||||
case U8G_COM_MSG_INIT:
|
||||
SCK_pin_ST7920_HAL = u8g->pin_list[U8G_PI_SCK];
|
||||
MOSI_pin_ST7920_HAL_HAL = u8g->pin_list[U8G_PI_MOSI];
|
||||
case U8G_COM_MSG_INIT:
|
||||
SCK_pin_ST7920_HAL = u8g->pin_list[U8G_PI_SCK];
|
||||
MOSI_pin_ST7920_HAL_HAL = u8g->pin_list[U8G_PI_MOSI];
|
||||
|
||||
u8g_SetPIOutput(u8g, U8G_PI_CS);
|
||||
u8g_SetPIOutput(u8g, U8G_PI_SCK);
|
||||
u8g_SetPIOutput(u8g, U8G_PI_MOSI);
|
||||
u8g_Delay(5);
|
||||
u8g_SetPIOutput(u8g, U8G_PI_CS);
|
||||
u8g_SetPIOutput(u8g, U8G_PI_SCK);
|
||||
u8g_SetPIOutput(u8g, U8G_PI_MOSI);
|
||||
u8g_Delay(5);
|
||||
|
||||
SPI_speed = swSpiInit(SPI_SPEED, SCK_pin_ST7920_HAL, MOSI_pin_ST7920_HAL_HAL);
|
||||
SPI_speed = swSpiInit(SPI_SPEED, SCK_pin_ST7920_HAL, MOSI_pin_ST7920_HAL_HAL);
|
||||
|
||||
u8g_SetPILevel(u8g, U8G_PI_CS, 0);
|
||||
u8g_SetPILevel(u8g, U8G_PI_SCK, 0);
|
||||
u8g_SetPILevel(u8g, U8G_PI_MOSI, 0);
|
||||
u8g_SetPILevel(u8g, U8G_PI_CS, 0);
|
||||
u8g_SetPILevel(u8g, U8G_PI_SCK, 0);
|
||||
u8g_SetPILevel(u8g, U8G_PI_MOSI, 0);
|
||||
|
||||
u8g->pin_list[U8G_PI_A0_STATE] = 0; /* inital RS state: command mode */
|
||||
break;
|
||||
u8g->pin_list[U8G_PI_A0_STATE] = 0; /* inital RS state: command mode */
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_STOP:
|
||||
break;
|
||||
case U8G_COM_MSG_STOP:
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_RESET:
|
||||
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
|
||||
break;
|
||||
case U8G_COM_MSG_RESET:
|
||||
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
|
||||
u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
|
||||
break;
|
||||
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
|
||||
u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_CHIP_SELECT:
|
||||
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_CS]) u8g_SetPILevel(u8g, U8G_PI_CS, arg_val); //note: the st7920 has an active high chip select
|
||||
break;
|
||||
case U8G_COM_MSG_CHIP_SELECT:
|
||||
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_CS]) u8g_SetPILevel(u8g, U8G_PI_CS, arg_val); //note: the st7920 has an active high chip select
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_WRITE_BYTE:
|
||||
u8g_com_LPC1768_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], arg_val);
|
||||
break;
|
||||
case U8G_COM_MSG_WRITE_BYTE:
|
||||
u8g_com_LPC1768_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], arg_val);
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_WRITE_SEQ: {
|
||||
uint8_t *ptr = (uint8_t*) arg_ptr;
|
||||
while (arg_val > 0) {
|
||||
u8g_com_LPC1768_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
|
||||
arg_val--;
|
||||
}
|
||||
case U8G_COM_MSG_WRITE_SEQ: {
|
||||
uint8_t *ptr = (uint8_t*) arg_ptr;
|
||||
while (arg_val > 0) {
|
||||
u8g_com_LPC1768_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
|
||||
arg_val--;
|
||||
}
|
||||
break;
|
||||
}
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_WRITE_SEQ_P: {
|
||||
uint8_t *ptr = (uint8_t*) arg_ptr;
|
||||
while (arg_val > 0) {
|
||||
u8g_com_LPC1768_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
|
||||
arg_val--;
|
||||
}
|
||||
case U8G_COM_MSG_WRITE_SEQ_P: {
|
||||
uint8_t *ptr = (uint8_t*) arg_ptr;
|
||||
while (arg_val > 0) {
|
||||
u8g_com_LPC1768_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
|
||||
arg_val--;
|
||||
}
|
||||
break;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
break;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
#endif //TARGET_LPC1768
|
||||
#endif // DOGLCD
|
||||
|
||||
#endif // TARGET_LPC1768
|
||||
|
|
|
|||
|
|
@ -55,6 +55,10 @@
|
|||
|
||||
#ifdef TARGET_LPC1768
|
||||
|
||||
#include "../../inc/MarlinConfigPre.h"
|
||||
|
||||
#if ENABLED(DOGLCD)
|
||||
|
||||
#include <U8glib.h>
|
||||
#include "SoftwareSPI.h"
|
||||
|
||||
|
|
@ -120,4 +124,6 @@ uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
|
|||
return 1;
|
||||
}
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
#endif // TARGET_LPC1768
|
||||
|
|
|
|||
|
|
@ -65,7 +65,7 @@
|
|||
* beginning.
|
||||
*/
|
||||
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
#include "../../inc/MarlinConfigPre.h"
|
||||
|
||||
#if ENABLED(DOGLCD)
|
||||
|
||||
|
|
|
|||
|
|
@ -67,43 +67,43 @@
|
|||
|
||||
/* init sequence from https://github.com/adafruit/ST7565-LCD/blob/master/ST7565/ST7565.cpp */
|
||||
static const uint8_t u8g_dev_st7565_64128n_HAL_init_seq[] PROGMEM = {
|
||||
U8G_ESC_CS(0), // disable chip
|
||||
U8G_ESC_ADR(0), // instruction mode
|
||||
U8G_ESC_CS(1), // enable chip
|
||||
U8G_ESC_RST(15), // do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
|
||||
U8G_ESC_CS(0), // disable chip
|
||||
U8G_ESC_ADR(0), // instruction mode
|
||||
U8G_ESC_CS(1), // enable chip
|
||||
U8G_ESC_RST(15), // do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
|
||||
|
||||
0x0A2, // 0x0A2: LCD bias 1/9 (according to Displaytech 64128N datasheet)
|
||||
0x0A0, // Normal ADC Select (according to Displaytech 64128N datasheet)
|
||||
0x0A2, // 0x0A2: LCD bias 1/9 (according to Displaytech 64128N datasheet)
|
||||
0x0A0, // Normal ADC Select (according to Displaytech 64128N datasheet)
|
||||
|
||||
0x0C8, // common output mode: set scan direction normal operation/SHL Select, 0x0C0 --> SHL = 0, normal, 0x0C8 --> SHL = 1
|
||||
0x040, // Display start line for Displaytech 64128N
|
||||
0x0C8, // common output mode: set scan direction normal operation/SHL Select, 0x0C0 --> SHL = 0, normal, 0x0C8 --> SHL = 1
|
||||
0x040, // Display start line for Displaytech 64128N
|
||||
|
||||
0x028 | 0x04, // power control: turn on voltage converter
|
||||
U8G_ESC_DLY(50), // delay 50 ms
|
||||
0x028 | 0x04, // power control: turn on voltage converter
|
||||
U8G_ESC_DLY(50), // delay 50 ms
|
||||
|
||||
0x028 | 0x06, // power control: turn on voltage regulator
|
||||
U8G_ESC_DLY(50), // delay 50 ms
|
||||
0x028 | 0x06, // power control: turn on voltage regulator
|
||||
U8G_ESC_DLY(50), // delay 50 ms
|
||||
|
||||
0x028 | 0x07, // power control: turn on voltage follower
|
||||
U8G_ESC_DLY(50), // delay 50 ms
|
||||
0x028 | 0x07, // power control: turn on voltage follower
|
||||
U8G_ESC_DLY(50), // delay 50 ms
|
||||
|
||||
0x010, // Set V0 voltage resistor ratio. Setting for controlling brightness of Displaytech 64128N
|
||||
0x010, // Set V0 voltage resistor ratio. Setting for controlling brightness of Displaytech 64128N
|
||||
|
||||
0x0A6, // display normal, bit val 0: LCD pixel off.
|
||||
0x0A6, // display normal, bit val 0: LCD pixel off.
|
||||
|
||||
0x081, // set contrast
|
||||
0x01E, // Contrast value. Setting for controlling brightness of Displaytech 64128N
|
||||
0x081, // set contrast
|
||||
0x01E, // Contrast value. Setting for controlling brightness of Displaytech 64128N
|
||||
|
||||
|
||||
0x0AF, // display on
|
||||
0x0AF, // display on
|
||||
|
||||
U8G_ESC_DLY(100), // delay 100 ms
|
||||
0x0A5, // display all points, ST7565
|
||||
U8G_ESC_DLY(100), // delay 100 ms
|
||||
U8G_ESC_DLY(100), // delay 100 ms
|
||||
0x0A4, // normal display
|
||||
U8G_ESC_CS(0), // disable chip
|
||||
U8G_ESC_END // end of sequence
|
||||
U8G_ESC_DLY(100), // delay 100 ms
|
||||
0x0A5, // display all points, ST7565
|
||||
U8G_ESC_DLY(100), // delay 100 ms
|
||||
U8G_ESC_DLY(100), // delay 100 ms
|
||||
0x0A4, // normal display
|
||||
U8G_ESC_CS(0), // disable chip
|
||||
U8G_ESC_END // end of sequence
|
||||
};
|
||||
|
||||
static const uint8_t u8g_dev_st7565_64128n_HAL_data_start[] PROGMEM = {
|
||||
|
|
@ -211,7 +211,6 @@ uint8_t u8g_dev_st7565_64128n_HAL_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg,
|
|||
return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
|
||||
}
|
||||
|
||||
|
||||
U8G_PB_DEV(u8g_dev_st7565_64128n_HAL_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_64128n_HAL_fn, U8G_COM_HAL_SW_SPI_FN);
|
||||
|
||||
uint8_t u8g_dev_st7565_64128n_HAL_2x_buf[WIDTH*2] U8G_NOCOMMON ;
|
||||
|
|
|
|||
|
|
@ -53,7 +53,7 @@
|
|||
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
#include "../../inc/MarlinConfigPre.h"
|
||||
|
||||
#if ENABLED(DOGLCD)
|
||||
|
||||
|
|
|
|||
|
|
@ -57,7 +57,7 @@
|
|||
|
||||
*/
|
||||
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
#include "../../inc/MarlinConfigPre.h"
|
||||
|
||||
#if ENABLED(DOGLCD)
|
||||
|
||||
|
|
@ -108,10 +108,8 @@ static const uint8_t u8g_dev_uc1701_mini12864_HAL_data_start[] PROGMEM = {
|
|||
U8G_ESC_END /* end of sequence */
|
||||
};
|
||||
|
||||
uint8_t u8g_dev_uc1701_mini12864_HAL_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
|
||||
{
|
||||
switch(msg)
|
||||
{
|
||||
uint8_t u8g_dev_uc1701_mini12864_HAL_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) {
|
||||
switch(msg) {
|
||||
case U8G_DEV_MSG_INIT:
|
||||
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
|
||||
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_init_seq);
|
||||
|
|
@ -140,10 +138,8 @@ uint8_t u8g_dev_uc1701_mini12864_HAL_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg,
|
|||
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
|
||||
}
|
||||
|
||||
uint8_t u8g_dev_uc1701_mini12864_HAL_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
|
||||
{
|
||||
switch(msg)
|
||||
{
|
||||
uint8_t u8g_dev_uc1701_mini12864_HAL_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) {
|
||||
switch(msg) {
|
||||
case U8G_DEV_MSG_INIT:
|
||||
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
|
||||
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_init_seq);
|
||||
|
|
|
|||
|
|
@ -24,12 +24,13 @@
|
|||
// file u8g_dev_st7920_128x64_HAL.cpp for the HAL version.
|
||||
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
#include "../../HAL/Delay.h"
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
|
||||
#if !(defined(U8G_HAL_LINKS) || defined(__SAM3X8E__))
|
||||
|
||||
#include "../../HAL/Delay.h"
|
||||
|
||||
#define ST7920_CLK_PIN LCD_PINS_D4
|
||||
#define ST7920_DAT_PIN LCD_PINS_ENABLE
|
||||
#define ST7920_CS_PIN LCD_PINS_RS
|
||||
|
|
|
|||
|
|
@ -8,11 +8,8 @@
|
|||
*/
|
||||
|
||||
#include "../inc/MarlinConfigPre.h"
|
||||
#include "../inc/MarlinConfig.h"
|
||||
|
||||
#define USE_LCDPRINT_U8G ENABLED(ULTRA_LCD) && ENABLED(DOGLCD)
|
||||
|
||||
#if USE_LCDPRINT_U8G
|
||||
#if ENABLED(DOGLCD)
|
||||
|
||||
#include <U8glib.h>
|
||||
extern U8GLIB *pu8g;
|
||||
|
|
@ -72,9 +69,9 @@ int lcd_put_u8str_max_rom(const char * utf8_str_P, pixel_len_t max_length) {
|
|||
return ret;
|
||||
}
|
||||
|
||||
#else // !USE_LCDPRINT_U8G
|
||||
#else // !ULTRA_LCD
|
||||
|
||||
#define _lcd_write(a) TRACE("Write LCD: %c (%d)", (a), (int)(a));
|
||||
#define _lcd_setcursor(col, row) TRACE("Set cursor LCD: (%d,%d)", (col), (row));
|
||||
#define _lcd_write(a) TRACE("Write LCD: %c (%d)", (a), (int)(a));
|
||||
#define _lcd_setcursor(col, row) TRACE("Set cursor LCD: (%d,%d)", (col), (row));
|
||||
|
||||
#endif // !USE_LCDPRINT_U8G
|
||||
#endif // !ULTRA_LCD
|
||||
|
|
|
|||
Loading…
Reference in a new issue