Clean up some Travis tests
This commit is contained in:
Scott Lahteine
parent
c75f5a376b
commit
80f9473fb4
|
|
@ -28,7 +28,6 @@ exec_test $1 $2 "RADDS Z_TRIPLE"
|
|||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_RAMPS4DUE_EEF
|
||||
opt_set EXTRUDERS 2
|
||||
opt_enable NUM_SERVOS
|
||||
opt_set NUM_SERVOS 1
|
||||
opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
|
||||
exec_test $1 $2 "SWITCHING_EXTRUDER"
|
||||
|
|
|
|||
|
|
@ -23,7 +23,6 @@ exec_test $1 $2 "Azteeg X5GT Example Config"
|
|||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_MKS_SBASE
|
||||
opt_set EXTRUDERS 2
|
||||
opt_enable NUM_SERVOS
|
||||
opt_set NUM_SERVOS 1
|
||||
opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
|
||||
exec_test $1 $2 "MKS_SBASE SWITCHING_EXTRUDER"
|
||||
|
|
@ -34,30 +33,30 @@ opt_set EXTRUDERS 2
|
|||
opt_set TEMP_SENSOR_0 1
|
||||
opt_set TEMP_SENSOR_1 5
|
||||
opt_set TEMP_SENSOR_BED 1
|
||||
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
|
||||
opt_enable FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY
|
||||
opt_enable FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE
|
||||
opt_enable BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY
|
||||
opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT
|
||||
opt_enable_adv ADVANCED_PAUSE_FEATURE LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA PARK_HEAD_ON_PAUSE
|
||||
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT \
|
||||
FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY \
|
||||
FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
|
||||
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
|
||||
PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT
|
||||
opt_enable_adv ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
|
||||
LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA
|
||||
opt_set GRID_MAX_POINTS_X 16
|
||||
exec_test $1 $2 "MKS SBASE Many Features"
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_MKS_SBASE
|
||||
opt_enable COREYX
|
||||
opt_enable COREYX USE_XMAX_PLUG \
|
||||
REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT \
|
||||
FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR \
|
||||
FAN_SOFT_PWM SDSUPPORT
|
||||
opt_enable_adv SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME \
|
||||
ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK \
|
||||
VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL \
|
||||
EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS \
|
||||
MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
|
||||
opt_set_adv FAN_MIN_PWM 50
|
||||
opt_set_adv FAN_KICKSTART_TIME 100
|
||||
opt_set_adv XY_FREQUENCY_LIMIT 15
|
||||
opt_enable_adv SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME
|
||||
opt_enable_adv ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK
|
||||
opt_enable_adv VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL
|
||||
opt_enable_adv EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
|
||||
opt_enable_adv MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
|
||||
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
|
||||
opt_enable FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR
|
||||
opt_enable FAN_SOFT_PWM SDSUPPORT
|
||||
opt_enable USE_XMAX_PLUG
|
||||
exec_test $1 $2 "MKS SBASE Many less common options"
|
||||
|
||||
restore_configs
|
||||
|
|
@ -71,5 +70,5 @@ opt_set Z_DRIVER_TYPE TMC2130
|
|||
opt_enable_adv TMC_USE_SW_SPI MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD TMC_DEBUG SENSORLESS_PROBING
|
||||
exec_test $1 $2 "Delta Config (generic) + BOARD_COHESION3D_REMIX + UBL + EEPROM_SETTINGS + SENSORLESS_PROBING"
|
||||
|
||||
#clean up
|
||||
# clean up
|
||||
restore_configs
|
||||
|
|
|
|||
|
|
@ -23,12 +23,12 @@ opt_set TEMP_SENSOR_0 -2
|
|||
opt_set TEMP_SENSOR_1 1
|
||||
opt_set TEMP_SENSOR_BED 1
|
||||
opt_set POWER_SUPPLY 1
|
||||
opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING
|
||||
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS PINS_DEBUGGING
|
||||
opt_enable BLINKM PCA9632 RGB_LED NEOPIXEL_LED AUTO_POWER_CONTROL NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR
|
||||
opt_enable AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
|
||||
opt_enable_adv ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE
|
||||
opt_enable_adv FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING
|
||||
opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING \
|
||||
REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS PINS_DEBUGGING \
|
||||
BLINKM PCA9632 RGB_LED NEOPIXEL_LED AUTO_POWER_CONTROL NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR \
|
||||
AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
|
||||
opt_enable_adv ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE \
|
||||
FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING
|
||||
opt_set GRID_MAX_POINTS_X 16
|
||||
opt_set_adv FANMUX0_PIN 53
|
||||
exec_test $1 $2 "Extruders(2) MAX6675 Fixed Probe etc"
|
||||
|
|
@ -43,10 +43,10 @@ opt_set TEMP_SENSOR_2 5
|
|||
opt_set TEMP_SENSOR_3 20
|
||||
opt_set TEMP_SENSOR_4 999
|
||||
opt_set TEMP_SENSOR_BED 1
|
||||
opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION
|
||||
opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
|
||||
opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI
|
||||
opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME JUNCTION_DEVIATION
|
||||
opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION \
|
||||
EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
|
||||
opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI \
|
||||
CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME JUNCTION_DEVIATION
|
||||
exec_test $1 $2 "Probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders"
|
||||
#
|
||||
# Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language
|
||||
|
|
@ -61,9 +61,9 @@ exec_test $1 $2 "Add a Sled Z Probe, use UBL Cartesian moves, use Japanese langu
|
|||
# ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
|
||||
#
|
||||
restore_configs
|
||||
opt_enable NUM_SERVOS Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE
|
||||
opt_enable Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE \
|
||||
AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT
|
||||
opt_set NUM_SERVOS 1
|
||||
opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT
|
||||
opt_enable_adv NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET
|
||||
exec_test $1 $2 "Servo Probe with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS etc"
|
||||
#
|
||||
|
|
@ -84,12 +84,13 @@ exec_test $1 $2 "MESH_BED_LEVELING feature, with LCD"
|
|||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_MINIRAMBO
|
||||
opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR G26_MESH_EDITING LCD_BED_LEVELING ULTIMAKERCONTROLLER
|
||||
opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT
|
||||
opt_enable ULTIMAKERCONTROLLER SDSUPPORT
|
||||
opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632
|
||||
opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS
|
||||
opt_enable_adv ADVANCED_PAUSE_FEATURE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES PARK_HEAD_ON_PAUSE LCD_INFO_MENU M114_DETAIL
|
||||
opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR G26_MESH_EDITING LCD_BED_LEVELING ULTIMAKERCONTROLLER \
|
||||
EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
|
||||
ULTIMAKERCONTROLLER SDSUPPORT \
|
||||
PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632
|
||||
opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS \
|
||||
ADVANCED_PAUSE_FEATURE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES PARK_HEAD_ON_PAUSE \
|
||||
LCD_INFO_MENU M114_DETAIL
|
||||
opt_set_adv PWM_MOTOR_CURRENT "{ 1300, 1300, 1250 }"
|
||||
opt_set_adv I2C_SLAVE_ADDRESS 63
|
||||
exec_test $1 $2 "MINIRAMBO for PWM_MOTOR_CURRENT etc"
|
||||
|
|
@ -131,20 +132,19 @@ exec_test $1 $2 "DUAL_X_CARRIAGE"
|
|||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
|
||||
opt_enable COREYX
|
||||
opt_enable COREYX USE_XMAX_PLUG \
|
||||
REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT \
|
||||
FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR \
|
||||
ENDSTOP_INTERRUPTS_FEATURE ENDSTOP_NOISE_THRESHOLD FAN_SOFT_PWM SDSUPPORT \
|
||||
SWITCHING_TOOLHEAD NUM_SERVOS DEBUG_LEVELING_FEATURE
|
||||
opt_set_adv FAN_MIN_PWM 50
|
||||
opt_set_adv FAN_KICKSTART_TIME 100
|
||||
opt_set_adv XY_FREQUENCY_LIMIT 15
|
||||
opt_enable_adv SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME
|
||||
opt_enable_adv ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK
|
||||
opt_enable_adv VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL
|
||||
opt_enable_adv EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
|
||||
opt_enable_adv MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
|
||||
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
|
||||
opt_enable FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR
|
||||
opt_enable ENDSTOP_INTERRUPTS_FEATURE ENDSTOP_NOISE_THRESHOLD FAN_SOFT_PWM SDSUPPORT
|
||||
opt_enable USE_XMAX_PLUG
|
||||
opt_enable SWITCHING_TOOLHEAD NUM_SERVOS DEBUG_LEVELING_FEATURE
|
||||
opt_enable_adv SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME \
|
||||
ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK \
|
||||
VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL \
|
||||
EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS \
|
||||
MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
|
||||
opt_set EXTRUDERS 2
|
||||
opt_set TEMP_SENSOR_1 -4
|
||||
opt_set SERVO_DELAY "{ 300, 300, 300 }"
|
||||
|
|
@ -264,8 +264,8 @@ exec_test $1 $2 "Delta Config (generic) + ABL bilinear + PROBE_MANUALLY"
|
|||
# Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS
|
||||
#
|
||||
use_example_configs delta/generic
|
||||
opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT
|
||||
opt_enable OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY
|
||||
opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT \
|
||||
OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY
|
||||
exec_test $1 $2 "Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS"
|
||||
#
|
||||
# Delta Config (FLSUN AC because it's complex)
|
||||
|
|
@ -281,7 +281,8 @@ exec_test $1 $2 "Delta Config (FLSUN AC because it's complex)"
|
|||
# SCARA with TMC2130
|
||||
#
|
||||
use_example_configs SCARA
|
||||
opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE PAUSE_BEFORE_DEPLOY_STOW USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER
|
||||
opt_enable USE_ZMIN_PLUG FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR PAUSE_BEFORE_DEPLOY_STOW \
|
||||
EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER
|
||||
opt_set X_DRIVER_TYPE TMC2130
|
||||
opt_set Y_DRIVER_TYPE TMC2130
|
||||
opt_set Z_DRIVER_TYPE TMC2130
|
||||
|
|
@ -307,5 +308,5 @@ exec_test $1 $2 "TMC2208 Config"
|
|||
#
|
||||
#
|
||||
|
||||
#clean up
|
||||
# clean up
|
||||
restore_configs
|
||||
|
|
|
|||
|
|
@ -18,11 +18,11 @@ opt_set EXTRUDERS 2
|
|||
opt_set TEMP_SENSOR_0 1
|
||||
opt_set TEMP_SENSOR_1 5
|
||||
opt_set TEMP_SENSOR_BED 1
|
||||
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
|
||||
opt_enable FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY
|
||||
opt_enable FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE
|
||||
opt_enable BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY
|
||||
opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT M100_FREE_MEMORY_WATCHER
|
||||
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT \
|
||||
FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY \
|
||||
FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
|
||||
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
|
||||
PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT M100_FREE_MEMORY_WATCHER
|
||||
opt_enable_adv ADVANCED_PAUSE_FEATURE LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA PARK_HEAD_ON_PAUSE
|
||||
opt_set_adv I2C_SLAVE_ADDRESS 63
|
||||
opt_set GRID_MAX_POINTS_X 16
|
||||
|
|
@ -31,16 +31,16 @@ exec_test $1 $2 "As many features together as possible"
|
|||
# Test a Sled Z Probe with Linear leveling
|
||||
#
|
||||
restore_configs
|
||||
opt_enable Z_PROBE_SLED
|
||||
opt_enable AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
|
||||
opt_enable EEPROM_SETTINGS \
|
||||
Z_PROBE_SLED AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE
|
||||
exec_test $1 $2 "Sled Z Probe with Linear leveling"
|
||||
#
|
||||
# Test a Servo Probe
|
||||
#
|
||||
# restore_configs
|
||||
# opt_enable NUM_SERVOS Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE
|
||||
# opt_enable Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE \
|
||||
# AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
|
||||
# opt_set NUM_SERVOS 1
|
||||
# opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
|
||||
# exec_test $1 $2 "Servo Probe"
|
||||
#
|
||||
# ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
|
||||
|
|
@ -66,7 +66,6 @@ exec_test $1 $2 "Mixing Extruder"
|
|||
#
|
||||
# restore_configs
|
||||
# opt_set EXTRUDERS 2
|
||||
# opt_enable NUM_SERVOS
|
||||
# opt_set NUM_SERVOS 1
|
||||
# opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
|
||||
# exec_test $1 $2 "SWITCHING_EXTRUDER"
|
||||
|
|
|
|||
Loading…
Reference in a new issue