zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Fix and improve FYSETC LCD support (#13767)

Browse source
This commit is contained in:
Bob Kuhn 2019-04-21 20:48:53 -05:00 committed by Scott Lahteine
parent 4e35e6c705
commit 81ca5a4cd4
15 changed files with 369 additions and 142 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
Marlin/Configuration.h
View file

@ -1910,6 +1910,12 @@
// https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8 // https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8
// //
//#define FYSETC_MINI_12864 //#define FYSETC_MINI_12864
#ifdef FYSETC_MINI_12864
#define FYSETC_MINI_12864_REV_1_2 // types C, D, E & F back light is monochrome (always on) - discrete RGB signals
//#define FYSETC_MINI_12864_REV_2_0 // types A & B back light is RGB - requires LED_USER_PRESET_STARTUP - discrete RGB signals
//#define FYSETC_MINI_12864_REV_2_1 // types A & B back light is RGB - requires LED_USER_PRESET_STARTUP - RGB
//#define FYSETC_MINI_12864_REV_2_1 // types A & B back light is RGB - requires LED_USER_PRESET_STARTUP - Neopixel
#endif
// //
// Factory display for Creality CR-10 // Factory display for Creality CR-10

44
Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp
View file

@ -53,7 +53,7 @@
// Public functions // Public functions
// -------------------------------------------------------------------------- // --------------------------------------------------------------------------
#if ENABLED(DUE_SOFTWARE_SPI) #if EITHER(DUE_SOFTWARE_SPI, FORCE_SOFT_SPI)
// -------------------------------------------------------------------------- // --------------------------------------------------------------------------
// software SPI // software SPI
@ -739,7 +739,42 @@
#define SPI_MODE_2_DUE_HW 0 #define SPI_MODE_2_DUE_HW 0
#define SPI_MODE_3_DUE_HW 1 #define SPI_MODE_3_DUE_HW 1
/**
* The DUE SPI controller is set up so the upper word of the longword
* written to the transmit data register selects which SPI Chip Select
* Register is used. This allows different streams to have different SPI
* settings.
*
* In practice it's spooky. Some combinations hang the system, while others
* upset the peripheral device.
*
* SPI mode should be the same for all streams. The FYSETC_MINI_12864 gets
* upset if the clock phase changes after chip select goes active.
*
* SPI_CSR_CSAAT should be set for all streams. If not the WHILE_TX(0)
* macro returns immediately which can result in the SPI chip select going
* inactive before all the data has been sent.
*
* The TMC2130 library uses SPI0->SPI_CSR[3].
*
* The U8G hardware SPI uses SPI0->SPI_CSR[0]. The system hangs and/or the
* FYSETC_MINI_12864 gets upset if lower baud rates are used and the SD card
* is inserted or removed.
*
* The SD card uses SPI0->SPI_CSR[3]. Efforts were made to use [1] and [2]
* but they all resulted in hangs or garbage on the LCD.
*
* The SPI controlled chip selects are NOT enabled in the GPIO controller.
* The application must control the chip select.
*
* All of the above can be avoided by defining FORCE_SOFT_SPI to force the
* display to use software SPI.
*
*/
void spiInit(uint8_t spiRate=6) { // Default to slowest rate if not specified) void spiInit(uint8_t spiRate=6) { // Default to slowest rate if not specified)
// Also sets U8G SPI rate to 4MHz and the SPI mode to 3
// 8.4 MHz, 4 MHz, 2 MHz, 1 MHz, 0.5 MHz, 0.329 MHz, 0.329 MHz // 8.4 MHz, 4 MHz, 2 MHz, 1 MHz, 0.5 MHz, 0.329 MHz, 0.329 MHz
constexpr int spiDivider[] = { 10, 21, 42, 84, 168, 255, 255 }; constexpr int spiDivider[] = { 10, 21, 42, 84, 168, 255, 255 };
if (spiRate > 6) spiRate = 1; if (spiRate > 6) spiRate = 1;
@ -760,15 +795,16 @@
// TMC2103 compatible setup // TMC2103 compatible setup
// Master mode, no fault detection, PCS bits in data written to TDR select CSR register // Master mode, no fault detection, PCS bits in data written to TDR select CSR register
SPI0->SPI_MR = SPI_MR_MSTR | SPI_MR_PS | SPI_MR_MODFDIS; SPI0->SPI_MR = SPI_MR_MSTR | SPI_MR_PS | SPI_MR_MODFDIS;
// SPI mode 0, 8 Bit data transfer, baud rate // SPI mode 3, 8 Bit data transfer, baud rate
SPI0->SPI_CSR[3] = SPI_CSR_SCBR(spiDivider[spiRate]) | SPI_CSR_CSAAT | SPI_MODE_0_DUE_HW; // use same CSR as TMC2130 SPI0->SPI_CSR[3] = SPI_CSR_SCBR(spiDivider[spiRate]) | SPI_CSR_CSAAT | SPI_MODE_3_DUE_HW; // use same CSR as TMC2130
SPI0->SPI_CSR[0] = SPI_CSR_SCBR(spiDivider[1]) | SPI_CSR_CSAAT | SPI_MODE_3_DUE_HW; // U8G default to 4MHz
} }
void spiBegin() { spiInit(); } void spiBegin() { spiInit(); }
static uint8_t spiTransfer(uint8_t data) { static uint8_t spiTransfer(uint8_t data) {
WHILE_TX(0); WHILE_TX(0);
SPI0->SPI_TDR = (uint32_t)data | 0x00070000UL; // Add TMC2130 PCS bits to every byte SPI0->SPI_TDR = (uint32_t)data | 0x00070000UL; // Add TMC2130 PCS bits to every byte (use SPI0->SPI_CSR[3])
WHILE_TX(0); WHILE_TX(0);
WHILE_RX(0); WHILE_RX(0);
return SPI0->SPI_RDR; return SPI0->SPI_RDR;

6
Marlin/src/inc/Conditionals_LCD.h
View file

@ -138,6 +138,8 @@
#elif ENABLED(MKS_MINI_12864) #elif ENABLED(MKS_MINI_12864)
#define MINIPANEL #define MINIPANEL
#define DEFAULT_LCD_CONTRAST 150
#define LCD_CONTRAST_MAX 255
#elif ENABLED(FYSETC_MINI_12864) #elif ENABLED(FYSETC_MINI_12864)
@ -153,7 +155,9 @@
#if EITHER(MAKRPANEL, MINIPANEL) #if EITHER(MAKRPANEL, MINIPANEL)
#define DOGLCD #define DOGLCD
#define ULTIPANEL #define ULTIPANEL
#define DEFAULT_LCD_CONTRAST 17 #ifndef DEFAULT_LCD_CONTRAST
#define DEFAULT_LCD_CONTRAST 17
#endif
#endif #endif
#if ENABLED(ULTI_CONTROLLER) #if ENABLED(ULTI_CONTROLLER)

7
Marlin/src/inc/SanityCheck.h
View file

@ -1786,13 +1786,6 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#error "Please select no more than one LCD controller option." #error "Please select no more than one LCD controller option."
#endif #endif
/**
* Fysetc Mini 12864 requirements
*/
#if ENABLED(FYSETC_MINI_12864) && DISABLED(LED_USER_PRESET_STARTUP)
#error "FYSETC_MINI_12864 requires LED_USER_PRESET_STARTUP to enable the backlight on startup."
#endif
/** /**
* Check existing CS pins against enabled TMC SPI drivers. * Check existing CS pins against enabled TMC SPI drivers.
*/ */

13
Marlin/src/lcd/dogm/HAL_LCD_class_defines.h
View file

@ -94,3 +94,16 @@ public:
: U8GLIB(&u8g_dev_tft_320x240_upscale_from_128x64, cs, rs, reset) : U8GLIB(&u8g_dev_tft_320x240_upscale_from_128x64, cs, rs, reset)
{ } { }
}; };
extern u8g_dev_t u8g_dev_uc1701_mini12864_HAL_2x_sw_spi, u8g_dev_uc1701_mini12864_HAL_2x_hw_spi;
class U8GLIB_MINI12864_2X_HAL : public U8GLIB {
public:
U8GLIB_MINI12864_2X_HAL(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1701_mini12864_HAL_2x_sw_spi, sck, mosi, cs, a0, reset)
{ }
U8GLIB_MINI12864_2X_HAL(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_uc1701_mini12864_HAL_2x_hw_spi, cs, a0, reset)
{ }
};

67
Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp
View file

@ -66,42 +66,47 @@
#define PAGE_HEIGHT 8 #define PAGE_HEIGHT 8
static const uint8_t u8g_dev_uc1701_mini12864_HAL_init_seq[] PROGMEM = { static const uint8_t u8g_dev_uc1701_mini12864_HAL_init_seq[] PROGMEM = {
U8G_ESC_CS(0), /* disable chip */ U8G_ESC_CS(0), /* disable chip */
U8G_ESC_ADR(0), /* instruction mode */ U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */ U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */
U8G_ESC_CS(1), /* enable chip */ U8G_ESC_CS(1), /* enable chip */
0x0E2, /* soft reset */ 0x0E2, /* soft reset */
0x040, /* set display start line to 0 */ 0x040, /* set display start line to 0 */
0x0A0, /* ADC set to reverse */ 0x0A0, /* ADC set to reverse */
0x0C8, /* common output mode */ 0x0C8, /* common output mode */
0x0A6, /* display normal, bit val 0: LCD pixel off. */ 0x0A6, /* display normal, bit val 0: LCD pixel off. */
0x0A2, /* LCD bias 1/9 */ 0x0A2, /* LCD bias 1/9 */
0x02F, /* all power control circuits on */ 0x02F, /* all power control circuits on */
0x0F8, /* set booster ratio to */ 0x0F8, /* set booster ratio to */
0x000, /* 4x */ 0x000, /* 4x */
0x023, /* set V0 voltage resistor ratio to large */ 0x023, /* set V0 voltage resistor ratio to large */
0x081, /* set contrast */ 0x081, /* set contrast */
0x027, /* contrast value */ 0x027, /* contrast value */
0x0AC, /* indicator */ 0x0AC, /* indicator */
0x000, /* disable */ 0x000, /* disable */
0x0AF, /* display on */ 0x0AF, /* display on */
U8G_ESC_DLY(100), /* delay 100 ms */ U8G_ESC_CS(0), /* disable chip */
0x0A5, /* display all points, ST7565 */ U8G_ESC_DLY(100), /* delay 100 ms */
U8G_ESC_DLY(100), /* delay 100 ms */ U8G_ESC_CS(1), /* enable chip */
U8G_ESC_DLY(100), /* delay 100 ms */
0x0A4, /* normal display */ 0x0A5, /* display all points, ST7565 */
U8G_ESC_CS(0), /* disable chip */ U8G_ESC_CS(0), /* disable chip */
U8G_ESC_END /* end of sequence */ U8G_ESC_DLY(100), /* delay 100 ms */
U8G_ESC_DLY(100), /* delay 100 ms */
U8G_ESC_CS(1), /* enable chip */
0x0A4, /* normal display */
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_END /* end of sequence */
}; };
static const uint8_t u8g_dev_uc1701_mini12864_HAL_data_start[] PROGMEM = { static const uint8_t u8g_dev_uc1701_mini12864_HAL_data_start[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */ U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */ U8G_ESC_CS(1), /* enable chip */
0x010, /* set upper 4 bit of the col adr to 0 */ 0x010, /* set upper 4 bit of the col adr to 0 */
0x000, /* set lower 4 bit of the col adr to 4 */ 0x000, /* set lower 4 bit of the col adr to 4 */
U8G_ESC_END /* end of sequence */ U8G_ESC_END /* end of sequence */
}; };
uint8_t u8g_dev_uc1701_mini12864_HAL_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) { uint8_t u8g_dev_uc1701_mini12864_HAL_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) {

4
Marlin/src/lcd/dogm/ultralcd_DOGM.h
View file

@ -111,8 +111,8 @@
// The MINIPanel display // The MINIPanel display
//#define U8G_CLASS U8GLIB_MINI12864 //#define U8G_CLASS U8GLIB_MINI12864
//#define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // 8 stripes //#define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // 8 stripes
#define U8G_CLASS U8GLIB_MINI12864_2X #define U8G_CLASS U8GLIB_MINI12864_2X_HAL
#if ENABLED(FYSETC_MINI_12864) && DOGLCD_SCK > 0 #if BOTH(FYSETC_MINI_12864, FORCE_SOFT_SPI)
#define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0 // 4 stripes SW-SPI #define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0 // 4 stripes SW-SPI
#else #else
#define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // 4 stripes HW-SPI #define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // 4 stripes HW-SPI

4
Marlin/src/lcd/ultralcd.cpp
View file

@ -668,6 +668,7 @@ void MarlinUI::update() {
static uint16_t max_display_update_time = 0; static uint16_t max_display_update_time = 0;
static millis_t next_lcd_update_ms; static millis_t next_lcd_update_ms;
millis_t ms = millis();
#if HAS_LCD_MENU #if HAS_LCD_MENU
@ -729,11 +730,12 @@ void MarlinUI::update() {
refresh(); refresh();
init_lcd(); // May revive the LCD if static electricity killed it init_lcd(); // May revive the LCD if static electricity killed it
ms = millis();
next_lcd_update_ms = ms + LCD_UPDATE_INTERVAL; // delay LCD update until after SD activity completes
} }
#endif // SDSUPPORT && SD_DETECT_PIN #endif // SDSUPPORT && SD_DETECT_PIN
const millis_t ms = millis();
if (ELAPSED(ms, next_lcd_update_ms) if (ELAPSED(ms, next_lcd_update_ms)
#if HAS_GRAPHICAL_LCD #if HAS_GRAPHICAL_LCD
|| drawing_screen || drawing_screen

51
Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h
View file

@ -202,26 +202,45 @@
#define SD_DETECT_PIN P1_31 // (49) (NOT 5V tolerant) #define SD_DETECT_PIN P1_31 // (49) (NOT 5V tolerant)
#if ENABLED(FYSETC_MINI_12864) #if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS P1_18 #define DOGLCD_CS P1_18
#define DOGLCD_A0 P1_19 #define DOGLCD_A0 P1_19
#define LCD_RESET_PIN P1_20
#define LCD_BACKLIGHT_PIN -1 #define LCD_BACKLIGHT_PIN -1
#define RGB_LED #define LCD_RESET_PIN P1_20 // Must be high or open for LCD to operate normally.
#ifndef RGB_LED_R_PIN // Seems to work best if left open.
#define RGB_LED_R_PIN P1_21
#endif #define FYSETC_MINI_12864_REV_1_2
#ifndef RGB_LED_G_PIN //#define FYSETC_MINI_12864_REV_2_0
#define RGB_LED_G_PIN P1_22 //#define FYSETC_MINI_12864_REV_2_1
#endif #if EITHER(FYSETC_MINI_12864_REV_1_2, FYSETC_MINI_12864_REV_2_0)
#ifndef RGB_LED_B_PIN #define RGB_LED
#define RGB_LED_B_PIN P1_23 #ifndef RGB_LED_R_PIN
#endif #define RGB_LED_R_PIN P1_21
#ifndef RGB_LED_W_PIN #endif
#define RGB_LED_W_PIN -1 #ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN P1_22
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN P1_23
#endif
#elif defined(FYSETC_MINI_12864_REV_2_1)
#define NEOPIXEL_LED
#define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
#define NEOPIXEL_PIN P1_21 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
#define NEOPIXEL_PIXELS 3 // Number of LEDs in the strip
#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
#define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255)
#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
#else
#error "Either FYSETC_MINI_12864_REV_1_2, FYSETC_MINI_12864_REV_2_0 or FYSETC_MINI_12864_REV_2_1 must be defined"
#endif #endif
#else #if !defined(LED_USER_PRESET_STARTUP) && EITHER(FYSETC_MINI_12864_REV_2_0, FYSETC_MINI_12864_REV_2_1)
#error "LED_USER_PRESET_STARTUP must be enabled when using FYSETC_MINI_12864 REV 2.0 and later"
#endif
#else // !FYSETC_MINI_12864
#if ENABLED(MKS_MINI_12864) #if ENABLED(MKS_MINI_12864)
#define DOGLCD_CS P1_21 #define DOGLCD_CS P1_21
@ -234,7 +253,7 @@
#define LCD_PINS_D7 P1_23 #define LCD_PINS_D7 P1_23
#endif #endif
#endif // FYSETC_MINI_12864 #endif // !FYSETC_MINI_12864
#endif #endif

46
Marlin/src/pins/pins_FYSETC_F6_13.h
View file

@ -28,8 +28,8 @@
#error "Oops! Select 'FYSETC F6' in 'Tools > Board.'" #error "Oops! Select 'FYSETC F6' in 'Tools > Board.'"
#endif #endif
#ifdef SD_DETECT_INVERTED #if ENABLED(SD_DETECT_INVERTED)
#error "SD_DETECT_INVERTED must be disabled for the FYSETC_F6_13 board." //#error "SD_DETECT_INVERTED must be disabled for the FYSETC_F6_13 board."
#endif #endif
#define BOARD_NAME "FYSETC F6 1.3" #define BOARD_NAME "FYSETC F6 1.3"
@ -190,20 +190,42 @@
// //
#define DOGLCD_A0 16 #define DOGLCD_A0 16
#define DOGLCD_CS 17 #define DOGLCD_CS 17
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN 25
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN 27
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN 29
#endif
#define LCD_BACKLIGHT_PIN -1 #define LCD_BACKLIGHT_PIN -1
#define LCD_RESET_PIN 23
#define KILL_PIN 41 #define KILL_PIN 41
#define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally.
// Seems to work best if left open.
#define FYSETC_MINI_12864_REV_1_2
//#define FYSETC_MINI_12864_REV_2_0
//#define FYSETC_MINI_12864_REV_2_1
#if EITHER(FYSETC_MINI_12864_REV_1_2, FYSETC_MINI_12864_REV_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN 25
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN 27
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN 29
#endif
#elif defined(FYSETC_MINI_12864_REV_2_1)
#define NEOPIXEL_LED
#define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
#define NEOPIXEL_PIN 25 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
#define NEOPIXEL_PIXELS 3 // Number of LEDs in the strip
#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
#define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255)
#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
#else
#error "Either FYSETC_MINI_12864_REV_1_2, FYSETC_MINI_12864_REV_2_0 or FYSETC_MINI_12864_REV_2_1 must be defined"
#endif
#if !defined(LED_USER_PRESET_STARTUP) && EITHER(FYSETC_MINI_12864_REV_2_0, FYSETC_MINI_12864_REV_2_1)
#error "LED_USER_PRESET_STARTUP must be enabled when using FYSETC_MINI_12864 REV 2.0 and later"
#endif
#elif HAS_GRAPHICAL_LCD #elif HAS_GRAPHICAL_LCD
#define LCD_PINS_RS 16 #define LCD_PINS_RS 16

37
Marlin/src/pins/pins_RAMPS.h
View file

@ -526,7 +526,6 @@
// From https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8 // From https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8
#define BEEPER_PIN 37 #define BEEPER_PIN 37
#define LCD_RESET_PIN 23
#define DOGLCD_A0 16 #define DOGLCD_A0 16
#define DOGLCD_CS 17 #define DOGLCD_CS 17
@ -537,14 +536,36 @@
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN 49
#ifndef RGB_LED_R_PIN #define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally.
#define RGB_LED_R_PIN 25 // Seems to work best if left open.
#define FYSETC_MINI_12864_REV_1_2
//#define FYSETC_MINI_12864_REV_2_0
//#define FYSETC_MINI_12864_REV_2_1
#if EITHER(FYSETC_MINI_12864_REV_1_2, FYSETC_MINI_12864_REV_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN 25
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN 27
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN 29
#endif
#elif defined(FYSETC_MINI_12864_REV_2_1)
#define NEOPIXEL_LED
#define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
#define NEOPIXEL_PIN 25 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
#define NEOPIXEL_PIXELS 3 // Number of LEDs in the strip
#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
#define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255)
#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
#else
#error "Either FYSETC_MINI_12864_REV_1_2, FYSETC_MINI_12864_REV_2_0 or FYSETC_MINI_12864_REV_2_1 must be defined"
#endif #endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN 27 #if !defined(LED_USER_PRESET_STARTUP) && EITHER(FYSETC_MINI_12864_REV_2_0, FYSETC_MINI_12864_REV_2_1)
#endif #error "LED_USER_PRESET_STARTUP must be enabled when using FYSETC_MINI_12864 REV 2.0 and later"
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN 29
#endif #endif
#elif ENABLED(MINIPANEL) #elif ENABLED(MINIPANEL)

81
Marlin/src/pins/pins_RAMPS_FD_V1.h
View file

@ -150,32 +150,71 @@
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
#define LCD_PINS_RS 16 #define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17 #define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif #endif
#if ENABLED(FYSETC_MINI_12864) #if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS LCD_PINS_ENABLE #define DOGLCD_CS LCD_PINS_ENABLE
#define DOGLCD_A0 LCD_PINS_RS #define DOGLCD_A0 LCD_PINS_RS
#elif ENABLED(MINIPANEL)
#define DOGLCD_CS 25 //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes problems
#define DOGLCD_A0 27
#define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally.
// Seems to work best if left open.
#define FYSETC_MINI_12864_REV_1_2
//#define FYSETC_MINI_12864_REV_2_0
//#define FYSETC_MINI_12864_REV_2_1
#if EITHER(FYSETC_MINI_12864_REV_1_2, FYSETC_MINI_12864_REV_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN 25
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN 27
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN 29
#endif
#elif defined(FYSETC_MINI_12864_REV_2_1)
#define NEOPIXEL_LED
#define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
#define NEOPIXEL_PIN 25 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
#define NEOPIXEL_PIXELS 3 // Number of LEDs in the strip
#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
#define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255)
#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
#else
#error "Either FYSETC_MINI_12864_REV_1_2, FYSETC_MINI_12864_REV_2_0 or FYSETC_MINI_12864_REV_2_1 must be defined"
#endif
#if !defined(LED_USER_PRESET_STARTUP) && EITHER(FYSETC_MINI_12864_REV_2_0, FYSETC_MINI_12864_REV_2_1)
#error "LED_USER_PRESET_STARTUP must be enabled when using FYSETC_MINI_12864 REV 2.0 and later"
#endif
#elif ENABLED(NEWPANEL)
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#if ENABLED(MINIPANEL)
#define DOGLCD_CS 25
#define DOGLCD_A0 27
#endif
#endif #endif
#if ANY(VIKI2, miniVIKI) #if ANY(VIKI2, miniVIKI)
#define DOGLCD_A0 16 #define DOGLCD_A0 16
#define KILL_PIN 51 #define KILL_PIN 51
#define STAT_LED_BLUE_PIN 29 #define STAT_LED_BLUE_PIN 29
#define STAT_LED_RED_PIN 23 #define STAT_LED_RED_PIN 23
#define DOGLCD_CS 17 #define DOGLCD_CS 17
#define DOGLCD_SCK 76 // SCK_PIN - These are required for DUE Hardware SPI #define DOGLCD_SCK 76 // SCK_PIN - Required for DUE Hardware SPI
#define DOGLCD_MOSI 75 // MOSI_PIN #define DOGLCD_MOSI 75 // MOSI_PIN
#define DOGLCD_MISO 74 // MISO_PIN #define DOGLCD_MISO 74 // MISO_PIN
#endif #endif
#endif // ULTRA_LCD #endif // ULTRA_LCD
#if HAS_DRIVER(TMC2208) #if HAS_DRIVER(TMC2208)
@ -201,10 +240,8 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENA) #if HOTENDS < 3 && ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENA)
#if HOTENDS < 3 #define SPINDLE_LASER_ENA_PIN 45 // Use E2 ENA
#define SPINDLE_LASER_ENA_PIN 45 // Use E2 ENA #define SPINDLE_LASER_PWM_PIN 12 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_PWM_PIN 12 // MUST BE HARDWARE PWM #define SPINDLE_DIR_PIN 47 // Use E2 DIR
#define SPINDLE_DIR_PIN 47 // Use E2 DIR
#endif
#endif #endif

1
Marlin/src/pins/pins_RAMPS_RE_ARM.h
View file

@ -320,6 +320,7 @@
#define DOGLCD_MOSI P0_18 #define DOGLCD_MOSI P0_18
#define DOGLCD_CS P1_09 // use Ethernet connector for EXP1 cable signals #define DOGLCD_CS P1_09 // use Ethernet connector for EXP1 cable signals
#define DOGLCD_A0 P1_14 #define DOGLCD_A0 P1_14
#define FORCE_SOFT_SPI // required on a Re-ARM system
#else #else
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2 #define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2

78
Marlin/src/pins/pins_RURAMPS4D_11.h
View file

@ -202,31 +202,24 @@
// //
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#if EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER) #if ANY(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER, REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BEEPER_PIN 62 #define BEEPER_PIN 62
#define LCD_PINS_D4 48
#define LCD_PINS_D5 50
#define LCD_PINS_D6 52
#define LCD_PINS_D7 53
#define SD_DETECT_PIN 51
#endif
#if EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER)
#define LCD_PINS_RS 63 #define LCD_PINS_RS 63
#define LCD_PINS_ENABLE 64 #define LCD_PINS_ENABLE 64
#define LCD_PINS_D4 48
#define LCD_PINS_D5 50
#define LCD_PINS_D6 52
#define LCD_PINS_D7 53
#define SD_DETECT_PIN 51
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BEEPER_PIN 62
#define LCD_PINS_RS 52 #define LCD_PINS_RS 52
#define LCD_PINS_ENABLE 53 #define LCD_PINS_ENABLE 53
#define LCD_PINS_D4 48
#define LCD_PINS_D5 50
#define LCD_PINS_D6 52
#define LCD_PINS_D7 53
#define SD_DETECT_PIN 51
#elif HAS_SSD1306_OLED_I2C #elif HAS_SSD1306_OLED_I2C
@ -234,16 +227,57 @@
#define LCD_SDSS 10 #define LCD_SDSS 10
#define SD_DETECT_PIN 51 #define SD_DETECT_PIN 51
#elif ENABLED(FYSETC_MINI_12864)
#define BEEPER_PIN 62
#define DOGLCD_CS 64
#define DOGLCD_A0 63
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes problems
#define LCD_RESET_PIN 48 // Must be high or open for LCD to operate normally.
// Seems to work best if left open.
#define FYSETC_MINI_12864_REV_1_2
//#define FYSETC_MINI_12864_REV_2_0
//#define FYSETC_MINI_12864_REV_2_1
#if EITHER(FYSETC_MINI_12864_REV_1_2, FYSETC_MINI_12864_REV_2_0)
#define RGB_LED
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN 50 // D5
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN 52 // D6
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN 53 // D7
#endif
#elif defined(FYSETC_MINI_12864_REV_2_1)
#define NEOPIXEL_LED
#define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
#define NEOPIXEL_PIN 50 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
#define NEOPIXEL_PIXELS 3 // Number of LEDs in the strip
#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
#define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255)
#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
#else
#error "Either FYSETC_MINI_12864_REV_1_2, FYSETC_MINI_12864_REV_2_0 or FYSETC_MINI_12864_REV_2_1 must be defined"
#endif
#if !defined(LED_USER_PRESET_STARTUP) && EITHER(FYSETC_MINI_12864_REV_2_0, FYSETC_MINI_12864_REV_2_1)
#error "LED_USER_PRESET_STARTUP must be enabled when using FYSETC_MINI_12864 REV 2.0 and later"
#endif
#elif ENABLED(SPARK_FULL_GRAPHICS) #elif ENABLED(SPARK_FULL_GRAPHICS)
//http://doku.radds.org/dokumentation/other-electronics/sparklcd/ //http://doku.radds.org/dokumentation/other-electronics/sparklcd/
#error "Oops! SPARK_FULL_GRAPHICS not supported with RURAMPS4D." #error "Oops! SPARK_FULL_GRAPHICS not supported with RURAMPS4D."
//#define LCD_PINS_D4 29//? //#define LCD_PINS_D4 29 //?
//#define LCD_PINS_ENABLE 27//? //#define LCD_PINS_ENABLE 27 //?
//#define LCD_PINS_RS 25//? //#define LCD_PINS_RS 25 //?
//#define BTN_EN1 35//? //#define BTN_EN1 35 //?
//#define BTN_EN2 33//? //#define BTN_EN2 33 //?
//#define BTN_ENC 37//? //#define BTN_ENC 37 //?
#endif // SPARK_FULL_GRAPHICS #endif // SPARK_FULL_GRAPHICS

66
Marlin/src/pins/pins_RURAMPS4D_13.h
View file

@ -188,31 +188,24 @@
// //
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#if EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER) #if ANY(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER, REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BEEPER_PIN 62 #define BEEPER_PIN 62
#define LCD_PINS_D4 48
#define LCD_PINS_D5 50
#define LCD_PINS_D6 52
#define LCD_PINS_D7 53
#define SD_DETECT_PIN 51
#endif
#if EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER)
#define LCD_PINS_RS 63 #define LCD_PINS_RS 63
#define LCD_PINS_ENABLE 64 #define LCD_PINS_ENABLE 64
#define LCD_PINS_D4 48
#define LCD_PINS_D5 50
#define LCD_PINS_D6 52
#define LCD_PINS_D7 53
#define SD_DETECT_PIN 51
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BEEPER_PIN 62
#define LCD_PINS_RS 52 #define LCD_PINS_RS 52
#define LCD_PINS_ENABLE 53 #define LCD_PINS_ENABLE 53
#define LCD_PINS_D4 48
#define LCD_PINS_D5 50
#define LCD_PINS_D6 52
#define LCD_PINS_D7 53
#define SD_DETECT_PIN 51
#elif HAS_SSD1306_OLED_I2C #elif HAS_SSD1306_OLED_I2C
@ -220,6 +213,47 @@
#define LCD_SDSS 10 #define LCD_SDSS 10
#define SD_DETECT_PIN 51 #define SD_DETECT_PIN 51
#elif ENABLED(FYSETC_MINI_12864)
#define BEEPER_PIN 62
#define DOGLCD_CS 64
#define DOGLCD_A0 63
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes problems
#define LCD_RESET_PIN 48 // Must be high or open for LCD to operate normally.
// Seems to work best if left open.
#define FYSETC_MINI_12864_REV_1_2
//#define FYSETC_MINI_12864_REV_2_0
//#define FYSETC_MINI_12864_REV_2_1
#if EITHER(FYSETC_MINI_12864_REV_1_2, FYSETC_MINI_12864_REV_2_0)
#define RGB_LED
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN 50 // D5
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN 52 // D6
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN 53 // D7
#endif
#elif defined(FYSETC_MINI_12864_REV_2_1)
#define NEOPIXEL_LED
#define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
#define NEOPIXEL_PIN 50 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
#define NEOPIXEL_PIXELS 3 // Number of LEDs in the strip
#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
#define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255)
#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
#else
#error "Either FYSETC_MINI_12864_REV_1_2, FYSETC_MINI_12864_REV_2_0 or FYSETC_MINI_12864_REV_2_1 must be defined"
#endif
#if !defined(LED_USER_PRESET_STARTUP) && EITHER(FYSETC_MINI_12864_REV_2_0, FYSETC_MINI_12864_REV_2_1)
#error "LED_USER_PRESET_STARTUP must be enabled when using FYSETC_MINI_12864 REV 2.0 and later"
#endif
#elif ENABLED(MKS_MINI_12864) #elif ENABLED(MKS_MINI_12864)
#define ORIG_BEEPER_PIN 62 #define ORIG_BEEPER_PIN 62