zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Merge pull request #7437 from thinkyhead/bf1_geeetech_config

Browse source 
Geeetech I3 Pro X + GT2560 Config
This commit is contained in:
Scott Lahteine 2017-08-05 03:58:47 -05:00 committed by GitHub
parent dd841a3675 b2822a59f9
commit 82cfdd4d8f
63 changed files with 2364 additions and 504 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

15
Marlin/Configuration.h
View file

@ -551,7 +551,6 @@
#define DEFAULT_ZJERK 0.4 #define DEFAULT_ZJERK 0.4
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================
//=========================================================================== //===========================================================================
@ -593,7 +592,7 @@
* Probe Type * Probe Type
* *
* Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
* You must activate one of these to use Auto Bed Leveling below. * Activate one of these to use Auto Bed Leveling below.
*/ */
/** /**
@ -1309,12 +1308,6 @@
// //
//#define ULTIPANEL //#define ULTIPANEL
//
// Cartesio UI
// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
//
//#define CARTESIO_UI
// //
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
// http://reprap.org/wiki/PanelOne // http://reprap.org/wiki/PanelOne
@ -1397,6 +1390,12 @@
// //
//#define BQ_LCD_SMART_CONTROLLER //#define BQ_LCD_SMART_CONTROLLER
//
// Cartesio UI
// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
//
//#define CARTESIO_UI
// //
// ANET_10 Controller supported displays. // ANET_10 Controller supported displays.
// //

6
Marlin/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine/test this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -394,7 +394,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -648,7 +648,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)

14
Marlin/SanityCheck.h
View file

@ -51,7 +51,7 @@
* Warnings for old configurations * Warnings for old configurations
*/ */
#if !defined(X_BED_SIZE) || !defined(Y_BED_SIZE) #if !defined(X_BED_SIZE) || !defined(Y_BED_SIZE)
#error "X_BED_SIZE and BED_Y_SIZE are now required! Please update your configuration." #error "X_BED_SIZE and Y_BED_SIZE are now required! Please update your configuration."
#elif WATCH_TEMP_PERIOD > 500 #elif WATCH_TEMP_PERIOD > 500
#error "WATCH_TEMP_PERIOD now uses seconds instead of milliseconds." #error "WATCH_TEMP_PERIOD now uses seconds instead of milliseconds."
#elif DISABLED(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD)) #elif DISABLED(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD))
@ -244,6 +244,12 @@
#error "Z_DUAL_STEPPER_DRIVERS requires Z2 pins (and an extra E plug)." #error "Z_DUAL_STEPPER_DRIVERS requires Z2 pins (and an extra E plug)."
#endif #endif
/**
* Validate that the bed size fits
*/
static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
"Movement bounds ([XY]_MIN_POS, [XY]_MAX_POS) are too narrow to contain [XY]_BED_SIZE.");
/** /**
* Progress Bar * Progress Bar
*/ */
@ -418,10 +424,10 @@
#endif #endif
/** /**
* Servo deactivation depends on servo endstops or switching nozzle * Servo deactivation depends on servo endstops, switching nozzle, or switching extruder
*/ */
#if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) && !HAS_Z_SERVO_ENDSTOP && !defined(SWITCHING_NOZZLE_SERVO_NR) #if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) && !HAS_Z_SERVO_ENDSTOP && !defined(SWITCHING_NOZZLE_SERVO_NR) && !defined(SWITCHING_EXTRUDER_SERVO_NR)
#error "Z_ENDSTOP_SERVO_NR or switching nozzle is required for DEACTIVATE_SERVOS_AFTER_MOVE." #error "Z_ENDSTOP_SERVO_NR, switching nozzle, or switching extruder is required for DEACTIVATE_SERVOS_AFTER_MOVE."
#endif #endif
/** /**

30
Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h
View file

@ -161,7 +161,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -307,6 +310,7 @@
#define HEATER_1_MAXTEMP 250 #define HEATER_1_MAXTEMP 250
#define HEATER_2_MAXTEMP 250 #define HEATER_2_MAXTEMP 250
#define HEATER_3_MAXTEMP 250 #define HEATER_3_MAXTEMP 250
#define HEATER_4_MAXTEMP 250
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
//=========================================================================== //===========================================================================
@ -478,13 +482,13 @@
#if DISABLED(ENDSTOPPULLUPS) #if DISABLED(ENDSTOPPULLUPS)
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_XMAX
#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_YMAX
#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_ZMAX
#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_XMIN
#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_YMIN
#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN
#define ENDSTOPPULLUP_ZMIN_PROBE //#define ENDSTOPPULLUP_ZMIN_PROBE
#endif #endif
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
@ -1476,11 +1480,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1498,6 +1497,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

14
Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -394,7 +394,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,4,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,4,16,16} // [1,2,4,8,16]
@ -452,6 +452,9 @@
// On the Info Screen, display XY with one decimal place when possible // On the Info Screen, display XY with one decimal place when possible
//#define LCD_DECIMAL_SMALL_XY //#define LCD_DECIMAL_SMALL_XY
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
@ -645,7 +648,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -667,6 +670,10 @@
#define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
#define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
#define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#endif #endif
// @section extras // @section extras
@ -1283,6 +1290,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

16
Marlin/example_configurations/AliExpress/CL-260/Configuration.h
View file

@ -161,7 +161,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -548,7 +551,6 @@
#define DEFAULT_ZJERK 0.4 #define DEFAULT_ZJERK 0.4
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================
//=========================================================================== //===========================================================================
@ -1458,11 +1460,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1480,6 +1477,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

15
Marlin/example_configurations/Anet/A6/Configuration.h
View file

@ -608,7 +608,6 @@
//#define DEFAULT_ZJERK 0.3 //#define DEFAULT_ZJERK 0.3
//#define DEFAULT_EJERK 5.0 //#define DEFAULT_EJERK 5.0
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================
//=========================================================================== //===========================================================================
@ -650,7 +649,7 @@
* Probe Type * Probe Type
* *
* Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
* You must activate one of these to use Auto Bed Leveling below. * Activate one of these to use Auto Bed Leveling below.
*/ */
/** /**
@ -1466,12 +1465,6 @@
// //
//#define ULTIPANEL //#define ULTIPANEL
//
// Cartesio UI
// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
//
//#define CARTESIO_UI
// //
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
// http://reprap.org/wiki/PanelOne // http://reprap.org/wiki/PanelOne
@ -1556,6 +1549,12 @@
// //
//#define BQ_LCD_SMART_CONTROLLER //#define BQ_LCD_SMART_CONTROLLER
//
// Cartesio UI
// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
//
//#define CARTESIO_UI
// //
// ANET_10 Controller supported displays. // ANET_10 Controller supported displays.
// //

7
Marlin/example_configurations/Anet/A6/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine/test this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -394,7 +394,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -648,7 +648,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -1290,6 +1290,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

16
Marlin/example_configurations/Anet/A8/Configuration.h
View file

@ -557,7 +557,6 @@
#define DEFAULT_ZJERK 0.3 #define DEFAULT_ZJERK 0.3
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================
//=========================================================================== //===========================================================================
@ -599,7 +598,7 @@
* Probe Type * Probe Type
* *
* Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
* You must activate one of these to use Auto Bed Leveling below. * Activate one of these to use Auto Bed Leveling below.
*/ */
/** /**
@ -1013,6 +1012,7 @@
// //
//#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages //#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages
//#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. //#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
// //
// M100 Free Memory Watcher // M100 Free Memory Watcher
@ -1314,12 +1314,6 @@
// //
//#define ULTIPANEL //#define ULTIPANEL
//
// Cartesio UI
// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
//
//#define CARTESIO_UI
// //
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
// http://reprap.org/wiki/PanelOne // http://reprap.org/wiki/PanelOne
@ -1404,6 +1398,12 @@
// //
//#define BQ_LCD_SMART_CONTROLLER //#define BQ_LCD_SMART_CONTROLLER
//
// Cartesio UI
// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
//
//#define CARTESIO_UI
// //
// ANET_10 Controller supported displays. // ANET_10 Controller supported displays.
// //

7
Marlin/example_configurations/Anet/A8/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine/test this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -394,7 +394,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -648,7 +648,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -1290,6 +1290,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

16
Marlin/example_configurations/BQ/Hephestos/Configuration.h
View file

@ -164,7 +164,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -310,6 +313,7 @@
#define HEATER_1_MAXTEMP 260 #define HEATER_1_MAXTEMP 260
#define HEATER_2_MAXTEMP 260 #define HEATER_2_MAXTEMP 260
#define HEATER_3_MAXTEMP 260 #define HEATER_3_MAXTEMP 260
#define HEATER_4_MAXTEMP 260
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
//=========================================================================== //===========================================================================
@ -1447,11 +1451,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1469,6 +1468,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

14
Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -394,7 +394,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -452,6 +452,9 @@
// On the Info Screen, display XY with one decimal place when possible // On the Info Screen, display XY with one decimal place when possible
//#define LCD_DECIMAL_SMALL_XY //#define LCD_DECIMAL_SMALL_XY
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
@ -645,7 +648,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -667,6 +670,10 @@
#define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
#define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
#define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#endif #endif
// @section extras // @section extras
@ -1283,6 +1290,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

15
Marlin/example_configurations/BQ/Hephestos_2/Configuration.h
View file

@ -160,7 +160,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -1458,11 +1461,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1480,6 +1478,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

31
Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -452,6 +452,9 @@
// On the Info Screen, display XY with one decimal place when possible // On the Info Screen, display XY with one decimal place when possible
#define LCD_DECIMAL_SMALL_XY #define LCD_DECIMAL_SMALL_XY
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
@ -531,8 +534,25 @@
#endif // SDSUPPORT #endif // SDSUPPORT
// Some additional options are available for graphical displays: /**
* Additional options for Graphical Displays
*
* Use the optimizations here to improve printing performance,
* which can be adversely affected by graphical display drawing,
* especially when doing several short moves, and when printing
* on DELTA and SCARA machines.
*
* Some of these options may result in the display lagging behind
* controller events, as there is a trade-off between reliable
* printing performance versus fast display updates.
*/
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME
// Enable to save many cycles by drawing a hollow frame on Menu Screens
#define MENU_HOLLOW_FRAME
// A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM.
// Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
#define USE_BIG_EDIT_FONT #define USE_BIG_EDIT_FONT
@ -628,7 +648,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -650,6 +670,10 @@
#define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
#define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
#define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#endif #endif
// @section extras // @section extras
@ -1266,6 +1290,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

16
Marlin/example_configurations/BQ/WITBOX/Configuration.h
View file

@ -164,7 +164,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -310,6 +313,7 @@
#define HEATER_1_MAXTEMP 260 #define HEATER_1_MAXTEMP 260
#define HEATER_2_MAXTEMP 260 #define HEATER_2_MAXTEMP 260
#define HEATER_3_MAXTEMP 260 #define HEATER_3_MAXTEMP 260
#define HEATER_4_MAXTEMP 260
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
//=========================================================================== //===========================================================================
@ -1447,11 +1451,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1469,6 +1468,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

14
Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -394,7 +394,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -452,6 +452,9 @@
// On the Info Screen, display XY with one decimal place when possible // On the Info Screen, display XY with one decimal place when possible
//#define LCD_DECIMAL_SMALL_XY //#define LCD_DECIMAL_SMALL_XY
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
@ -645,7 +648,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -667,6 +670,10 @@
#define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
#define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
#define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#endif #endif
// @section extras // @section extras
@ -1283,6 +1290,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

16
Marlin/example_configurations/Cartesio/Configuration.h
View file

@ -162,7 +162,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -308,6 +311,7 @@
#define HEATER_1_MAXTEMP 415 #define HEATER_1_MAXTEMP 415
#define HEATER_2_MAXTEMP 415 #define HEATER_2_MAXTEMP 415
#define HEATER_3_MAXTEMP 415 #define HEATER_3_MAXTEMP 415
#define HEATER_4_MAXTEMP 415
#define BED_MAXTEMP 165 #define BED_MAXTEMP 165
//=========================================================================== //===========================================================================
@ -1455,11 +1459,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1477,6 +1476,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

14
Marlin/example_configurations/Cartesio/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -394,7 +394,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -452,6 +452,9 @@
// On the Info Screen, display XY with one decimal place when possible // On the Info Screen, display XY with one decimal place when possible
//#define LCD_DECIMAL_SMALL_XY //#define LCD_DECIMAL_SMALL_XY
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
@ -645,7 +648,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -667,6 +670,10 @@
#define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
#define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
#define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#endif #endif
// @section extras // @section extras
@ -1283,6 +1290,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

20
Marlin/example_configurations/Creality/CR-10/Configuration.h
View file

@ -335,12 +335,12 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Stock CR-10 tuned for 70C // Stock CR-10 tuned for 70C
#define DEFAULT_Kp 22.57 #define DEFAULT_Kp 22.57
#define DEFAULT_Ki 1.72 #define DEFAULT_Ki 1.72
#define DEFAULT_Kd 73.96 #define DEFAULT_Kd 73.96
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
@ -561,7 +561,6 @@
#define DEFAULT_ZJERK 2.7 #define DEFAULT_ZJERK 2.7
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================
//=========================================================================== //===========================================================================
@ -603,7 +602,7 @@
* Probe Type * Probe Type
* *
* Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
* You must activate one of these to use Auto Bed Leveling below. * Activate one of these to use Auto Bed Leveling below.
*/ */
/** /**
@ -1019,6 +1018,7 @@
// //
#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages #define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
// //
// M100 Free Memory Watcher // M100 Free Memory Watcher
@ -1320,12 +1320,6 @@
// //
//#define ULTIPANEL //#define ULTIPANEL
//
// Cartesio UI
// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
//
//#define CARTESIO_UI
// //
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
// http://reprap.org/wiki/PanelOne // http://reprap.org/wiki/PanelOne
@ -1408,6 +1402,12 @@
// //
//#define BQ_LCD_SMART_CONTROLLER //#define BQ_LCD_SMART_CONTROLLER
//
// Cartesio UI
// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
//
//#define CARTESIO_UI
// //
// ANET_10 Controller supported displays. // ANET_10 Controller supported displays.
// //

17
Marlin/example_configurations/Felix/Configuration.h
View file

@ -161,7 +161,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -727,7 +730,7 @@
// Be sure you have this distance over your Z_MAX_POS in case. // Be sure you have this distance over your Z_MAX_POS in case.
// Direction of endstops when homing; 1=MAX, -1=MIN // Direction of endstops when homing; 1=MAX, -1=MIN
// :[-1, 1] // :[-1,1]
#define X_HOME_DIR -1 #define X_HOME_DIR -1
#define Y_HOME_DIR -1 #define Y_HOME_DIR -1
#define Z_HOME_DIR -1 #define Z_HOME_DIR -1
@ -1439,11 +1442,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1461,6 +1459,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

14
Marlin/example_configurations/Felix/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -394,7 +394,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -452,6 +452,9 @@
// On the Info Screen, display XY with one decimal place when possible // On the Info Screen, display XY with one decimal place when possible
//#define LCD_DECIMAL_SMALL_XY //#define LCD_DECIMAL_SMALL_XY
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
@ -645,7 +648,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -667,6 +670,10 @@
#define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
#define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
#define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#endif #endif
// @section extras // @section extras
@ -1283,6 +1290,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

15
Marlin/example_configurations/Felix/DUAL/Configuration.h
View file

@ -161,7 +161,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -1439,11 +1442,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1461,6 +1459,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

19
Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h
View file

@ -161,7 +161,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -553,7 +556,6 @@
#define DEFAULT_ZJERK 0.4 #define DEFAULT_ZJERK 0.4
#define DEFAULT_EJERK 4.0 #define DEFAULT_EJERK 4.0
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================
//=========================================================================== //===========================================================================
@ -698,7 +700,8 @@
#define Z_CLEARANCE_DEPLOY_PROBE 3 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_DEPLOY_PROBE 3 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points
// For M851 give a range for adjusting the Z probe offset#define Z_PROBE_OFFSET_RANGE_MIN -20 // For M851 give a range for adjusting the Z probe offset
#define Z_PROBE_OFFSET_RANGE_MIN -20
#define Z_PROBE_OFFSET_RANGE_MAX 20 #define Z_PROBE_OFFSET_RANGE_MAX 20
// Enable the M48 repeatability test to test probe accuracy // Enable the M48 repeatability test to test probe accuracy
@ -1462,11 +1465,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1484,6 +1482,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

13
Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine/test this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -394,7 +394,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -648,7 +648,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -795,7 +795,6 @@
* Requires an LCD display. * Requires an LCD display.
* This feature is required for the default FILAMENT_RUNOUT_SCRIPT. * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
*/ */
#define ADVANCED_PAUSE_FEATURE #define ADVANCED_PAUSE_FEATURE
#if ENABLED(ADVANCED_PAUSE_FEATURE) #if ENABLED(ADVANCED_PAUSE_FEATURE)
#define PAUSE_PARK_X_POS 10 // X position of hotend #define PAUSE_PARK_X_POS 10 // X position of hotend
@ -805,7 +804,6 @@
#define PAUSE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) #define PAUSE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers)
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s #define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm #define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
// It is a short retract used immediately after print interrupt before move to filament exchange position // It is a short retract used immediately after print interrupt before move to filament exchange position
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
@ -1211,15 +1209,11 @@
//#define SPEED_POWER_MAX 100 // 0-100% //#define SPEED_POWER_MAX 100 // 0-100%
#endif #endif
// @section debug
/** /**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/ */
#define PINS_DEBUGGING #define PINS_DEBUGGING
// @section extras
/** /**
* Auto-report temperatures with M155 S<seconds> * Auto-report temperatures with M155 S<seconds>
*/ */
@ -1296,6 +1290,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

1642
Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h Normal file
View file

File diff suppressed because it is too large Load diff

15
Marlin/example_configurations/Infitary/i3-M508/Configuration.h
View file

@ -555,7 +555,6 @@
#define DEFAULT_ZJERK 0.4 #define DEFAULT_ZJERK 0.4
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================
//=========================================================================== //===========================================================================
@ -597,7 +596,7 @@
* Probe Type * Probe Type
* *
* Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
* You must activate one of these to use Auto Bed Leveling below. * Activate one of these to use Auto Bed Leveling below.
*/ */
/** /**
@ -1313,12 +1312,6 @@
// //
//#define ULTIPANEL //#define ULTIPANEL
//
// Cartesio UI
// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
//
//#define CARTESIO_UI
// //
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
// http://reprap.org/wiki/PanelOne // http://reprap.org/wiki/PanelOne
@ -1401,6 +1394,12 @@
// //
//#define BQ_LCD_SMART_CONTROLLER //#define BQ_LCD_SMART_CONTROLLER
//
// Cartesio UI
// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
//
//#define CARTESIO_UI
// //
// ANET_10 Controller supported displays. // ANET_10 Controller supported displays.
// //

142
Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
View file

@ -123,8 +123,8 @@
#define AUTOTEMP_OLDWEIGHT 0.98 #define AUTOTEMP_OLDWEIGHT 0.98
#endif #endif
//Show Temperature ADC value // Show Temperature ADC value
//The M105 command return, besides traditional information, the ADC value read from temperature sensors. // Enable for M105 to include ADC values read from temperature sensors.
//#define SHOW_TEMP_ADC_VALUES //#define SHOW_TEMP_ADC_VALUES
/** /**
@ -220,12 +220,16 @@
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
// Define a pin to turn case light on/off /**
//#define CASE_LIGHT_PIN 4 * M355 Case Light on-off / brightness
#if PIN_EXISTS(CASE_LIGHT) */
#define INVERT_CASE_LIGHT false // Set to true if HIGH is the OFF state (active low) //#define CASE_LIGHT_ENABLE
//#define CASE_LIGHT_DEFAULT_ON // Uncomment to set default state to on #if ENABLED(CASE_LIGHT_ENABLE)
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light On / Off entry in main menu //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
#endif #endif
//=========================================================================== //===========================================================================
@ -280,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine/test this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -390,7 +394,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -415,16 +419,16 @@
* M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H
* M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2
*/ */
//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps //#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps
#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) #define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
//#define DIGIPOT_I2C //#define DIGIPOT_I2C
//#define DIGIPOT_MCP4018 //#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
//=========================================================================== //===========================================================================
//=============================Additional Features=========================== //=============================Additional Features===========================
@ -644,7 +648,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -674,10 +678,16 @@
// @section extras // @section extras
// Arc interpretation settings: //
#define ARC_SUPPORT // Disabling this saves ~2738 bytes // G2/G3 Arc Support
#define MM_PER_ARC_SEGMENT 1 //
#define N_ARC_CORRECTION 25 #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment
#define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
@ -814,6 +824,7 @@
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME. // even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume //#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
#endif #endif
// @section tmc // @section tmc
@ -1034,7 +1045,7 @@
*/ */
#define TMC2130_ADV() { } #define TMC2130_ADV() { }
#endif // ENABLED(HAVE_TMC2130) #endif // HAVE_TMC2130
// @section L6470 // @section L6470
@ -1269,4 +1280,95 @@
#define USER_GCODE_5 "G28\nM503" #define USER_GCODE_5 "G28\nM503"
#endif #endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
*/
//#define ACTION_ON_KILL "poweroff"
//===========================================================================
//====================== I2C Position Encoder Settings ======================
//===========================================================================
/**
* I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D.
*
* Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder
* Github: https://github.com/Aus3D/MagneticEncoder
*
* Supplier: http://aus3d.com.au/magnetic-encoder-module
* Alternative Supplier: http://reliabuild3d.com/
*
* Reilabuild encoders have been modified to improve reliability.
*/
//#define I2C_POSITION_ENCODERS
#if ENABLED(I2C_POSITION_ENCODERS)
#define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5
// encoders supported currently.
#define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200.
#define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. <X|Y|Z|E>_AXIS.
#define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or-
// I2CPE_ENC_TYPE_ROTARY.
#define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for
// 1mm poles. For linear encoders this is ticks / mm,
// for rotary encoders this is ticks / revolution.
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_NONE // Type of error error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of
// measurement noise / latency (filter).
#define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2.
#define I2CPE_ENC_2_AXIS Y_AXIS
#define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR
#define I2CPE_ENC_2_TICKS_UNIT 2048
//#define I2CPE_ENC_2_TICKS_REV (16 * 200)
//#define I2CPE_ENC_2_INVERT
#define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_NONE
#define I2CPE_ENC_2_EC_THRESH 0.10
#define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options
#define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below.
#define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4.
#define I2CPE_ENC_4_AXIS E_AXIS
#define I2CPE_ENC_5_ADDR 34 // Encoder 5.
#define I2CPE_ENC_5_AXIS E_AXIS
// Default settings for encoders which are enabled, but without settings configured above.
#define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR
#define I2CPE_DEF_ENC_TICKS_UNIT 2048
#define I2CPE_DEF_TICKS_REV (16 * 200)
#define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE
#define I2CPE_DEF_EC_THRESH 0.1
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to
// disable abort behaviour.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder
// is trusted again.
/**
* Position is checked every time a new command is executed from the buffer but during long moves,
* this setting determines the minimum update time between checks. A value of 100 works well with
* error rolling average when attempting to correct only for skips and not for vibration.
*/
#define I2CPE_MIN_UPD_TIME_MS 100 // Minimum time in miliseconds between encoder checks.
// Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise.
#define I2CPE_ERR_ROLLING_AVERAGE
#endif // I2C_POSITION_ENCODERS
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

18
Marlin/example_configurations/Malyan/M150/Configuration.h
View file

@ -166,7 +166,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -305,6 +308,7 @@
#define HEATER_1_MINTEMP 5 #define HEATER_1_MINTEMP 5
#define HEATER_2_MINTEMP 5 #define HEATER_2_MINTEMP 5
#define HEATER_3_MINTEMP 5 #define HEATER_3_MINTEMP 5
#define HEATER_4_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
// When temperature exceeds max temp, your heater will be switched off. // When temperature exceeds max temp, your heater will be switched off.
@ -314,6 +318,7 @@
#define HEATER_1_MAXTEMP 275 #define HEATER_1_MAXTEMP 275
#define HEATER_2_MAXTEMP 275 #define HEATER_2_MAXTEMP 275
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define HEATER_4_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
//=========================================================================== //===========================================================================
@ -566,7 +571,6 @@
#define DEFAULT_ZJERK 0.40 #define DEFAULT_ZJERK 0.40
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================
//=========================================================================== //===========================================================================
@ -1484,11 +1488,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1506,6 +1505,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

7
Marlin/example_configurations/Malyan/M150/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine/test this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -394,7 +394,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -648,7 +648,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -1290,6 +1290,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

15
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
View file

@ -161,7 +161,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -1457,11 +1460,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1479,6 +1477,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

15
Marlin/example_configurations/RigidBot/Configuration.h
View file

@ -164,7 +164,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -1457,11 +1460,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1479,6 +1477,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

14
Marlin/example_configurations/RigidBot/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -394,7 +394,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -452,6 +452,9 @@
// On the Info Screen, display XY with one decimal place when possible // On the Info Screen, display XY with one decimal place when possible
//#define LCD_DECIMAL_SMALL_XY //#define LCD_DECIMAL_SMALL_XY
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
@ -645,7 +648,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -667,6 +670,10 @@
#define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
#define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
#define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#endif #endif
// @section extras // @section extras
@ -1283,6 +1290,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

15
Marlin/example_configurations/SCARA/Configuration.h
View file

@ -191,7 +191,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -1469,11 +1472,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1491,6 +1489,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

14
Marlin/example_configurations/SCARA/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -394,7 +394,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -452,6 +452,9 @@
// On the Info Screen, display XY with one decimal place when possible // On the Info Screen, display XY with one decimal place when possible
//#define LCD_DECIMAL_SMALL_XY //#define LCD_DECIMAL_SMALL_XY
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
@ -645,7 +648,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -667,6 +670,10 @@
#define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
#define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
#define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#endif #endif
// @section extras // @section extras
@ -1283,6 +1290,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

10
Marlin/example_configurations/TinyBoy2/Configuration.h
View file

@ -183,7 +183,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -1513,11 +1516,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //

11
Marlin/example_configurations/TinyBoy2/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine/test this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -394,7 +394,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -648,7 +648,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -670,6 +670,10 @@
#define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
#define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
#define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#endif #endif
// @section extras // @section extras
@ -1286,6 +1290,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

10
Marlin/example_configurations/Velleman/K8200/Configuration.h
View file

@ -181,7 +181,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -1489,11 +1492,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //

18
Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
View file

@ -93,8 +93,8 @@
* Thermal Protection parameters for the bed are just as above for hotends. * Thermal Protection parameters for the bed are just as above for hotends.
*/ */
#if ENABLED(THERMAL_PROTECTION_BED) #if ENABLED(THERMAL_PROTECTION_BED)
// K8200 has weak heaters/power supply by default, so you have to relax! // K8200 has weak heaters/power supply by default, so you have to relax!
// the default bed is so weak, that you can hardly go over 75°C // the default bed is so weak, that you can hardly go over 75°C
#define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds
#define THERMAL_PROTECTION_BED_HYSTERESIS 10 // Degrees Celsius #define THERMAL_PROTECTION_BED_HYSTERESIS 10 // Degrees Celsius
@ -297,7 +297,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -407,7 +407,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -465,6 +465,9 @@
// On the Info Screen, display XY with one decimal place when possible // On the Info Screen, display XY with one decimal place when possible
//#define LCD_DECIMAL_SMALL_XY //#define LCD_DECIMAL_SMALL_XY
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
@ -658,7 +661,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -680,6 +683,10 @@
#define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
#define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
#define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#endif #endif
// @section extras // @section extras
@ -1296,6 +1303,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

15
Marlin/example_configurations/Velleman/K8400/Configuration.h
View file

@ -161,7 +161,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -1457,11 +1460,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1479,6 +1477,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

14
Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -394,7 +394,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -452,6 +452,9 @@
// On the Info Screen, display XY with one decimal place when possible // On the Info Screen, display XY with one decimal place when possible
//#define LCD_DECIMAL_SMALL_XY //#define LCD_DECIMAL_SMALL_XY
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
@ -645,7 +648,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -667,6 +670,10 @@
#define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
#define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
#define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#endif #endif
// @section extras // @section extras
@ -1283,6 +1290,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

15
Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h
View file

@ -161,7 +161,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -1457,11 +1460,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1479,6 +1477,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

17
Marlin/example_configurations/adafruit/ST7565/Configuration.h
View file

@ -161,7 +161,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -603,7 +606,7 @@
* A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
* (e.g., an inductive probe or a nozzle-based probe-switch.) * (e.g., an inductive probe or a nozzle-based probe-switch.)
*/ */
//#define FIX_MOUNTED_PROBE //#define FIX_MOUNTED_PROBE
/** /**
* Z Servo Probe, such as an endstop switch on a rotating arm. * Z Servo Probe, such as an endstop switch on a rotating arm.
@ -1457,11 +1460,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1479,6 +1477,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

22
Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
View file

@ -161,7 +161,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -851,7 +854,7 @@
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR true #define INVERT_Z_DIR true
// Enable this option for Toshiba steppers drivers // Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA //#define CONFIG_STEPPERS_TOSHIBA
// @section extruder // @section extruder
@ -974,6 +977,7 @@
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Set the number of grid points per dimension. // Set the number of grid points per dimension.
// Works best with 5 or more points in each dimension.
#define GRID_MAX_POINTS_X 7 #define GRID_MAX_POINTS_X 7
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
@ -1096,8 +1100,8 @@
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT ((X_MIN_POS + X_MAX_POS) / 2) // X point for Z homing when homing all axis (G28). #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axis (G28).
#define Z_SAFE_HOMING_Y_POINT ((Y_MIN_POS + Y_MAX_POS) / 2) // Y point for Z homing when homing all axis (G28). #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axis (G28).
#endif #endif
// Delta only homes to Z // Delta only homes to Z
@ -1584,11 +1588,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1606,6 +1605,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

11
Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine/test this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -396,7 +396,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -650,7 +650,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -672,6 +672,10 @@
#define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
#define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
#define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#endif #endif
// @section extras // @section extras
@ -1288,6 +1292,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

15
Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
View file

@ -161,7 +161,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -1578,11 +1581,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1600,6 +1598,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

14
Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -337,7 +337,7 @@
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
#define X_HOME_BUMP_MM 5 #define X_HOME_BUMP_MM 5
#define Y_HOME_BUMP_MM 5 #define Y_HOME_BUMP_MM 5
#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axis #define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
#define HOMING_BUMP_DIVISOR {10, 10, 10} // Re-Bump Speed Divisor (Divides the Homing Feedrate) #define HOMING_BUMP_DIVISOR {10, 10, 10} // Re-Bump Speed Divisor (Divides the Homing Feedrate)
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. //#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
@ -396,7 +396,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -650,7 +650,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -672,6 +672,10 @@
#define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
#define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
#define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#endif #endif
// @section extras // @section extras
@ -691,6 +695,7 @@
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target // G38.2 and G38.3 Probe Target
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
@ -1287,6 +1292,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

24
Marlin/example_configurations/delta/generic/Configuration.h
View file

@ -161,7 +161,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -981,6 +984,11 @@
//#define PROBE_Y_FIRST //#define PROBE_Y_FIRST
#if ENABLED(AUTO_BED_LEVELING_BILINEAR) #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Beyond the probed grid, continue the implied tilt?
// Default is to maintain the height of the nearest edge.
//#define EXTRAPOLATE_BEYOND_GRID
// //
// Experimental Subdivision of the grid by Catmull-Rom method. // Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh. // Synthesizes intermediate points to produce a more detailed mesh.
@ -1081,8 +1089,8 @@
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT ((X_MIN_POS + X_MAX_POS) / 2) // X point for Z homing when homing all axis (G28). #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axis (G28).
#define Z_SAFE_HOMING_Y_POINT ((Y_MIN_POS + Y_MAX_POS) / 2) // Y point for Z homing when homing all axis (G28). #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axis (G28).
#endif #endif
// Delta only homes to Z // Delta only homes to Z
@ -1568,11 +1576,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1590,6 +1593,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

16
Marlin/example_configurations/delta/generic/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -337,7 +337,7 @@
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
#define X_HOME_BUMP_MM 5 #define X_HOME_BUMP_MM 5
#define Y_HOME_BUMP_MM 5 #define Y_HOME_BUMP_MM 5
#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axis #define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
#define HOMING_BUMP_DIVISOR {10, 10, 10} // Re-Bump Speed Divisor (Divides the Homing Feedrate) #define HOMING_BUMP_DIVISOR {10, 10, 10} // Re-Bump Speed Divisor (Divides the Homing Feedrate)
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. //#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
@ -396,7 +396,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -454,6 +454,9 @@
// On the Info Screen, display XY with one decimal place when possible // On the Info Screen, display XY with one decimal place when possible
//#define LCD_DECIMAL_SMALL_XY //#define LCD_DECIMAL_SMALL_XY
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
@ -647,7 +650,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -669,6 +672,10 @@
#define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
#define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
#define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#endif #endif
// @section extras // @section extras
@ -1285,6 +1292,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

28
Marlin/example_configurations/delta/kossel_mini/Configuration.h
View file

@ -161,7 +161,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -512,7 +515,7 @@
// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. // extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
//#define USE_XMIN_PLUG //#define USE_XMIN_PLUG
//#define USE_YMIN_PLUG //#define USE_YMIN_PLUG
#define USE_ZMIN_PLUG #define USE_ZMIN_PLUG // a Z probe
#define USE_XMAX_PLUG #define USE_XMAX_PLUG
#define USE_YMAX_PLUG #define USE_YMAX_PLUG
#define USE_ZMAX_PLUG #define USE_ZMAX_PLUG
@ -656,7 +659,6 @@
* Activate one of these to use Auto Bed Leveling below. * Activate one of these to use Auto Bed Leveling below.
*/ */
/** /**
* The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe.
* Use G29 repeatedly, adjusting the Z height at each point with movement commands * Use G29 repeatedly, adjusting the Z height at each point with movement commands
@ -664,6 +666,12 @@
*/ */
//#define PROBE_MANUALLY //#define PROBE_MANUALLY
/**
* A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
* (e.g., an inductive probe or a nozzle-based probe-switch.)
*/
//#define FIX_MOUNTED_PROBE
/** /**
* Z Servo Probe, such as an endstop switch on a rotating arm. * Z Servo Probe, such as an endstop switch on a rotating arm.
*/ */
@ -1084,8 +1092,8 @@
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT ((X_MIN_POS + X_MAX_POS) / 2) // X point for Z homing when homing all axis (G28). #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axis (G28).
#define Z_SAFE_HOMING_Y_POINT ((Y_MIN_POS + Y_MAX_POS) / 2) // Y point for Z homing when homing all axis (G28). #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axis (G28).
#endif #endif
// Delta only homes to Z // Delta only homes to Z
@ -1571,11 +1579,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1593,6 +1596,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

16
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -337,7 +337,7 @@
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
#define X_HOME_BUMP_MM 5 #define X_HOME_BUMP_MM 5
#define Y_HOME_BUMP_MM 5 #define Y_HOME_BUMP_MM 5
#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axis #define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
#define HOMING_BUMP_DIVISOR {10, 10, 10} // Re-Bump Speed Divisor (Divides the Homing Feedrate) #define HOMING_BUMP_DIVISOR {10, 10, 10} // Re-Bump Speed Divisor (Divides the Homing Feedrate)
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. //#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
@ -396,7 +396,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -454,6 +454,9 @@
// On the Info Screen, display XY with one decimal place when possible // On the Info Screen, display XY with one decimal place when possible
//#define LCD_DECIMAL_SMALL_XY //#define LCD_DECIMAL_SMALL_XY
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
@ -647,7 +650,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -669,6 +672,10 @@
#define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
#define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
#define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#endif #endif
// @section extras // @section extras
@ -1285,6 +1292,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

19
Marlin/example_configurations/delta/kossel_pro/Configuration.h
View file

@ -165,7 +165,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -1089,8 +1092,8 @@
#define Z_SAFE_HOMING #define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT ((X_MIN_POS + X_MAX_POS) / 2) // X point for Z homing when homing all axis (G28). #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axis (G28).
#define Z_SAFE_HOMING_Y_POINT ((Y_MIN_POS + Y_MAX_POS) / 2) // Y point for Z homing when homing all axis (G28). #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axis (G28).
#endif #endif
// Delta only homes to Z // Delta only homes to Z
@ -1576,11 +1579,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1598,6 +1596,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

16
Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
View file

@ -289,7 +289,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -342,7 +342,7 @@
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
#define X_HOME_BUMP_MM 5 #define X_HOME_BUMP_MM 5
#define Y_HOME_BUMP_MM 5 #define Y_HOME_BUMP_MM 5
#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axis #define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
#define HOMING_BUMP_DIVISOR {10, 10, 10} // Re-Bump Speed Divisor (Divides the Homing Feedrate) #define HOMING_BUMP_DIVISOR {10, 10, 10} // Re-Bump Speed Divisor (Divides the Homing Feedrate)
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. //#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
@ -401,7 +401,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -459,6 +459,9 @@
// On the Info Screen, display XY with one decimal place when possible // On the Info Screen, display XY with one decimal place when possible
//#define LCD_DECIMAL_SMALL_XY //#define LCD_DECIMAL_SMALL_XY
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
@ -652,7 +655,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -674,6 +677,10 @@
#define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
#define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
#define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#endif #endif
// @section extras // @section extras
@ -1290,6 +1297,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

78
Marlin/example_configurations/delta/kossel_xl/Configuration.h
View file

@ -161,7 +161,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -799,60 +802,6 @@
#endif // Z_PROBE_ALLEN_KEY #endif // Z_PROBE_ALLEN_KEY
/**
* *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
*
* - RAMPS 1.3/1.4 boards may be able to use the 5V, GND, and Aux4->D32 pin.
* - Use 5V for powered (usu. inductive) sensors.
* - Otherwise connect:
* - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32.
*
* Normally-closed switches are advised and are the default.
*
*
* PIN OPTIONS\SETUP FOR Z PROBES
*
*
* WARNING:
* Setting the wrong pin may have unexpected and potentially disastrous consequences.
* Use with caution and do your homework.
*
*
* All Z PROBE pin options are configured by defining (or not defining)
* the following five items:
* Z_MIN_PROBE_ENDSTOP – defined below
* Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN – defined below
* Z_MIN_PIN - defined in the pins_YOUR_BOARD.h file
* Z_MIN_PROBE_PIN - defined in the pins_YOUR_BOARD.h file
*
* If you're using a probe then you need to tell Marlin which pin to use as
* the Z MIN ENDSTOP. Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN determines if the
* Z_MIN_PIN or if the Z_MIN_PROBE_PIN is used.
*
* The pin selected for the probe is ONLY checked during probing operations.
* If you want to use the Z_MIN_PIN as an endstop AND you want to have a Z PROBE
* then you’ll need to use the Z_MIN_PROBE_PIN option.
*
* Z_MIN_PROBE_ENDSTOP also needs to be enabled if you want to use Z_MIN_PROBE_PIN.
*
* The settings needed to use the Z_MIN_PROBE_PIN are:
* 1. select the type of probe you're using
* 2. define Z_MIN_PROBE_PIN in your pins_YOUR_BOARD.h file
* 3. disable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
* 4. enable Z_MIN_PROBE_ENDSTOP
* NOTE – if Z_MIN_PIN is defined then it’ll be checked during all moves in the
* negative Z direction.
*
* The settings needed to use the Z_MIN_PIN are:
* 1. select the type of probe you're using
* 2. enable Z_MIN _PIN in your pins_YOUR_BOARD.h file
* 3. enable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
* 4. disable Z_MIN_PROBE_ENDSTOP
* NOTES – if Z_MIN_PROBE_PIN is defined in the pins_YOUR_BOARD.h file then it’ll be
* ignored by Marlin
*/
/** /**
* Z probes require clearance when deploying, stowing, and moving between * Z probes require clearance when deploying, stowing, and moving between
* probe points to avoid hitting the bed and other hardware. * probe points to avoid hitting the bed and other hardware.
@ -1047,6 +996,11 @@
//#define PROBE_Y_FIRST //#define PROBE_Y_FIRST
#if ENABLED(AUTO_BED_LEVELING_BILINEAR) #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Beyond the probed grid, continue the implied tilt?
// Default is to maintain the height of the nearest edge.
//#define EXTRAPOLATE_BEYOND_GRID
// //
// Experimental Subdivision of the grid by Catmull-Rom method. // Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh. // Synthesizes intermediate points to produce a more detailed mesh.
@ -1147,8 +1101,8 @@
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT ((X_MIN_POS + X_MAX_POS) / 2) // X point for Z homing when homing all axis (G28). #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axis (G28).
#define Z_SAFE_HOMING_Y_POINT ((Y_MIN_POS + Y_MAX_POS) / 2) // Y point for Z homing when homing all axis (G28). #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axis (G28).
#endif #endif
// Delta only homes to Z // Delta only homes to Z
@ -1634,11 +1588,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1656,6 +1605,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

16
Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -337,7 +337,7 @@
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
#define X_HOME_BUMP_MM 2 #define X_HOME_BUMP_MM 2
#define Y_HOME_BUMP_MM 2 #define Y_HOME_BUMP_MM 2
#define Z_HOME_BUMP_MM 2 // deltas need the same for all three axis #define Z_HOME_BUMP_MM 2 // deltas need the same for all three axes
#define HOMING_BUMP_DIVISOR {2, 2, 4} // Re-Bump Speed Divisor (Divides the Homing Feedrate) #define HOMING_BUMP_DIVISOR {2, 2, 4} // Re-Bump Speed Divisor (Divides the Homing Feedrate)
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. //#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
@ -396,7 +396,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -454,6 +454,9 @@
// On the Info Screen, display XY with one decimal place when possible // On the Info Screen, display XY with one decimal place when possible
//#define LCD_DECIMAL_SMALL_XY //#define LCD_DECIMAL_SMALL_XY
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
@ -647,7 +650,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -669,6 +672,10 @@
#define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
#define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
#define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#endif #endif
// @section extras // @section extras
@ -1285,6 +1292,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

23
Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h
View file

@ -128,7 +128,7 @@
// Optional custom name for your RepStrap or other custom machine // Optional custom name for your RepStrap or other custom machine
// Displayed in the LCD "Ready" message // Displayed in the LCD "Ready" message
#define CUSTOM_MACHINE_NAME "UBL v1.0 " #define CUSTOM_MACHINE_NAME "gMax"
// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
@ -166,7 +166,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -570,7 +573,6 @@
// See http://marlinfw.org/configuration/probes.html // See http://marlinfw.org/configuration/probes.html
// //
/** /**
* Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
* *
@ -578,7 +580,6 @@
*/ */
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_ENDSTOP
* *
@ -985,8 +986,8 @@
#define Z_SAFE_HOMING #define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT (((X_MIN_POS + X_MAX_POS) / 2) - 4) // X point for Z homing when homing all axis (G28). #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2 - 4) // X point for Z homing when homing all axis (G28).
#define Z_SAFE_HOMING_Y_POINT (((Y_MIN_POS + Y_MAX_POS) / 2) + 4) // Y point for Z homing when homing all axis (G28). #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2 + 4) // Y point for Z homing when homing all axis (G28).
#endif #endif
// Homing speeds (mm/m) // Homing speeds (mm/m)
@ -1473,11 +1474,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1495,6 +1491,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

9
Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine/test this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -394,7 +394,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -648,7 +648,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -795,7 +795,6 @@
* Requires an LCD display. * Requires an LCD display.
* This feature is required for the default FILAMENT_RUNOUT_SCRIPT. * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
*/ */
#define ADVANCED_PAUSE_FEATURE #define ADVANCED_PAUSE_FEATURE
#if ENABLED(ADVANCED_PAUSE_FEATURE) #if ENABLED(ADVANCED_PAUSE_FEATURE)
#define PAUSE_PARK_X_POS 75 // X position of hotend #define PAUSE_PARK_X_POS 75 // X position of hotend
@ -805,7 +804,6 @@
#define PAUSE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) #define PAUSE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers)
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s #define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm #define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
// It is a short retract used immediately after print interrupt before move to filament exchange position // It is a short retract used immediately after print interrupt before move to filament exchange position
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
@ -1292,6 +1290,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

21
Marlin/example_configurations/makibox/Configuration.h
View file

@ -161,7 +161,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -370,9 +373,9 @@
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, // setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) // so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
#define MAX_BED_POWER 175 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 175 // limits duty cycle to bed; 255=full current
// This limit is set to 175 by default in the Makibox configuration and it can adjusted // This limit is set to 175 by default in the Makibox configuration and it can be adjusted
// to increase the heat up rate. However, if changed, user must be aware of the safety concerns // to increase the heatup rate. However, if changed, be aware of the safety concerns of
// of drawing too much current from the power supply. // drawing too much current from the power supply.
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)
@ -1460,11 +1463,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1482,6 +1480,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

14
Marlin/example_configurations/makibox/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -394,7 +394,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -452,6 +452,9 @@
// On the Info Screen, display XY with one decimal place when possible // On the Info Screen, display XY with one decimal place when possible
//#define LCD_DECIMAL_SMALL_XY //#define LCD_DECIMAL_SMALL_XY
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
@ -645,7 +648,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -667,6 +670,10 @@
#define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
#define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
#define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#endif #endif
// @section extras // @section extras
@ -1283,6 +1290,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

15
Marlin/example_configurations/tvrrug/Round2/Configuration.h
View file

@ -161,7 +161,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -1452,11 +1455,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1474,6 +1472,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

14
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -394,7 +394,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -452,6 +452,9 @@
// On the Info Screen, display XY with one decimal place when possible // On the Info Screen, display XY with one decimal place when possible
//#define LCD_DECIMAL_SMALL_XY //#define LCD_DECIMAL_SMALL_XY
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
@ -645,7 +648,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -667,6 +670,10 @@
#define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET))
#define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET)
#define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET))
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#endif #endif
// @section extras // @section extras
@ -1283,6 +1290,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

16
Marlin/example_configurations/wt150/Configuration.h
View file

@ -161,7 +161,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -553,7 +556,6 @@
#define DEFAULT_ZJERK 0.4 #define DEFAULT_ZJERK 0.4
#define DEFAULT_EJERK 5.0 #define DEFAULT_EJERK 5.0
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================
//=========================================================================== //===========================================================================
@ -1463,11 +1465,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1485,6 +1482,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================

90
Marlin/example_configurations/wt150/Configuration_adv.h
View file

@ -284,7 +284,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine/test this value #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // Use M666 to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -394,7 +394,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
@ -648,7 +648,7 @@
* *
* Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
* *
* Slic3r (including Průša Slic3r) produces Gcode compatible with the automatic mode. * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
* Cura (as of this writing) may produce Gcode incompatible with the automatic mode. * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
*/ */
#define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
@ -1280,89 +1280,6 @@
#define USER_GCODE_5 "G28\nM503" #define USER_GCODE_5 "G28\nM503"
#endif #endif
//===========================================================================
//============================ I2C Encoder Settings =========================
//===========================================================================
/**
* I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D.
*
* Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder
* Github: https://github.com/Aus3D/MagneticEncoder
*
* Supplier: http://aus3d.com.au/magnetic-encoder-module
* Alternative Supplier: http://reliabuild3d.com/
*
* Reilabuild encoders have been modified to improve reliability.
*/
//#define I2C_POSITION_ENCODERS
#if ENABLED(I2C_POSITION_ENCODERS)
#define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5
// encoders supported currently.
#define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200.
#define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. <X|Y|Z|E>_AXIS.
#define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or-
// I2CPE_ENC_TYPE_ROTARY.
#define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for
// 1mm poles. For linear encoders this is ticks / mm,
// for rotary encoders this is ticks / revolution.
//#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
// steps per full revolution (motor steps/rev * microstepping)
//#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
#define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_NONE // Type of error error correction.
#define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
// printer will attempt to correct the error; errors
// smaller than this are ignored to minimize effects of
// measurement noise / latency (filter).
#define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2.
#define I2CPE_ENC_2_AXIS Y_AXIS
#define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR
#define I2CPE_ENC_2_TICKS_UNIT 2048
//#define I2CPE_ENC_2_TICKS_REV (16 * 200)
//#define I2CPE_ENC_2_INVERT
#define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_NONE
#define I2CPE_ENC_2_EC_THRESH 0.10
#define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options
#define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below.
#define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4.
#define I2CPE_ENC_4_AXIS E_AXIS
#define I2CPE_ENC_5_ADDR 34 // Encoder 5.
#define I2CPE_ENC_5_AXIS E_AXIS
// Default settings for encoders which are enabled, but without settings configured above.
#define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR
#define I2CPE_DEF_ENC_TICKS_UNIT 2048
#define I2CPE_DEF_TICKS_REV (16 * 200)
#define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE
#define I2CPE_DEF_EC_THRESH 0.1
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to
// disable abort behaviour.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder
// is trusted again.
/**
* Position is checked every time a new command is executed from the buffer but during long moves,
* this setting determines the minimum update time between checks. A value of 100 works well with
* error rolling average when attempting to correct only for skips and not for vibration.
*/
#define I2CPE_MIN_UPD_TIME_MS 100 // Minimum time in miliseconds between encoder checks.
// Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise.
#define I2CPE_ERR_ROLLING_AVERAGE
#endif
/** /**
* Specify an action command to send to the host when the printer is killed. * Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
@ -1373,6 +1290,7 @@
//=========================================================================== //===========================================================================
//====================== I2C Position Encoder Settings ====================== //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.

4
Marlin/stepper_indirection.cpp
View file

@ -171,7 +171,7 @@
// Use internal reference voltage for current calculations. This is the default. // Use internal reference voltage for current calculations. This is the default.
// Following values from Trinamic's spreadsheet with values for a NEMA17 (42BYGHW609) // Following values from Trinamic's spreadsheet with values for a NEMA17 (42BYGHW609)
// https://www.trinamic.com/products/integrated-circuits/details/tmc2130/ // https://www.trinamic.com/products/integrated-circuits/details/tmc2130/
void tmc2130_init(TMC2130Stepper &st, const uint16_t microsteps, const uint32_t thrs, const uint32_t spmm) { void tmc2130_init(TMC2130Stepper &st, const uint16_t microsteps, const uint32_t thrs, const float &spmm) {
st.begin(); st.begin();
st.setCurrent(st.getCurrent(), R_SENSE, HOLD_MULTIPLIER); st.setCurrent(st.getCurrent(), R_SENSE, HOLD_MULTIPLIER);
st.microsteps(microsteps); st.microsteps(microsteps);
@ -199,7 +199,7 @@
#define _TMC2130_INIT(ST, SPMM) tmc2130_init(stepper##ST, ST##_MICROSTEPS, ST##_HYBRID_THRESHOLD, SPMM) #define _TMC2130_INIT(ST, SPMM) tmc2130_init(stepper##ST, ST##_MICROSTEPS, ST##_HYBRID_THRESHOLD, SPMM)
void tmc2130_init() { void tmc2130_init() {
constexpr uint16_t steps_per_mm[] = DEFAULT_AXIS_STEPS_PER_UNIT; constexpr float steps_per_mm[] = DEFAULT_AXIS_STEPS_PER_UNIT;
#if ENABLED(X_IS_TMC2130) #if ENABLED(X_IS_TMC2130)
_TMC2130_INIT( X, steps_per_mm[X_AXIS]); _TMC2130_INIT( X, steps_per_mm[X_AXIS]);
#if ENABLED(SENSORLESS_HOMING) #if ENABLED(SENSORLESS_HOMING)