zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

First draft of Unified Stepper / E Advance ISR

Browse source
This commit is contained in:
Sebastianv650 2016-12-12 20:30:02 +01:00 committed by Scott Lahteine
parent 451ba5df01
commit 84c685f8b5
20 changed files with 104 additions and 201 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

9
Marlin/Configuration_adv.h
View file

@ -547,14 +547,7 @@
* *
* Assumption: advance = k * (delta velocity) * Assumption: advance = k * (delta velocity)
* K=0 means advance disabled. * K=0 means advance disabled.
* To get a rough start value for calibration, measure your "free filament length" * See Marlin documentation for calibration instructions.
* between the hobbed bolt and the nozzle (in cm). Use the formula below that fits
* your setup, where L is the "free filament length":
*
* Filament diameter | 1.75mm | 3.0mm |
* ----------------------------|-----------|------------|
* Stiff filament (PLA) | K=47*L/10 | K=139*L/10 |
* Softer filament (ABS, nGen) | K=88*L/10 | K=260*L/10 |
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE

9
Marlin/example_configurations/Cartesio/Configuration_adv.h
View file

@ -547,14 +547,7 @@
* *
* Assumption: advance = k * (delta velocity) * Assumption: advance = k * (delta velocity)
* K=0 means advance disabled. * K=0 means advance disabled.
* To get a rough start value for calibration, measure your "free filament length" * See Marlin documentation for calibration instructions.
* between the hobbed bolt and the nozzle (in cm). Use the formula below that fits
* your setup, where L is the "free filament length":
*
* Filament diameter | 1.75mm | 3.0mm |
* ----------------------------|-----------|------------|
* Stiff filament (PLA) | K=47*L/10 | K=139*L/10 |
* Softer filament (ABS, nGen) | K=88*L/10 | K=260*L/10 |
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE

9
Marlin/example_configurations/Felix/Configuration_adv.h
View file

@ -547,14 +547,7 @@
* *
* Assumption: advance = k * (delta velocity) * Assumption: advance = k * (delta velocity)
* K=0 means advance disabled. * K=0 means advance disabled.
* To get a rough start value for calibration, measure your "free filament length" * See Marlin documentation for calibration instructions.
* between the hobbed bolt and the nozzle (in cm). Use the formula below that fits
* your setup, where L is the "free filament length":
*
* Filament diameter | 1.75mm | 3.0mm |
* ----------------------------|-----------|------------|
* Stiff filament (PLA) | K=47*L/10 | K=139*L/10 |
* Softer filament (ABS, nGen) | K=88*L/10 | K=260*L/10 |
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE

9
Marlin/example_configurations/Hephestos/Configuration_adv.h
View file

@ -547,14 +547,7 @@
* *
* Assumption: advance = k * (delta velocity) * Assumption: advance = k * (delta velocity)
* K=0 means advance disabled. * K=0 means advance disabled.
* To get a rough start value for calibration, measure your "free filament length" * See Marlin documentation for calibration instructions.
* between the hobbed bolt and the nozzle (in cm). Use the formula below that fits
* your setup, where L is the "free filament length":
*
* Filament diameter | 1.75mm | 3.0mm |
* ----------------------------|-----------|------------|
* Stiff filament (PLA) | K=47*L/10 | K=139*L/10 |
* Softer filament (ABS, nGen) | K=88*L/10 | K=260*L/10 |
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE

9
Marlin/example_configurations/Hephestos_2/Configuration_adv.h
View file

@ -530,14 +530,7 @@
* *
* Assumption: advance = k * (delta velocity) * Assumption: advance = k * (delta velocity)
* K=0 means advance disabled. * K=0 means advance disabled.
* To get a rough start value for calibration, measure your "free filament length" * See Marlin documentation for calibration instructions.
* between the hobbed bolt and the nozzle (in cm). Use the formula below that fits
* your setup, where L is the "free filament length":
*
* Filament diameter | 1.75mm | 3.0mm |
* ----------------------------|-----------|------------|
* Stiff filament (PLA) | K=47*L/10 | K=139*L/10 |
* Softer filament (ABS, nGen) | K=88*L/10 | K=260*L/10 |
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE

9
Marlin/example_configurations/K8200/Configuration_adv.h
View file

@ -560,14 +560,7 @@
* *
* Assumption: advance = k * (delta velocity) * Assumption: advance = k * (delta velocity)
* K=0 means advance disabled. * K=0 means advance disabled.
* To get a rough start value for calibration, measure your "free filament length" * See Marlin documentation for calibration instructions.
* between the hobbed bolt and the nozzle (in cm). Use the formula below that fits
* your setup, where L is the "free filament length":
*
* Filament diameter | 1.75mm | 3.0mm |
* ----------------------------|-----------|------------|
* Stiff filament (PLA) | K=47*L/10 | K=139*L/10 |
* Softer filament (ABS, nGen) | K=88*L/10 | K=260*L/10 |
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE

9
Marlin/example_configurations/K8400/Configuration_adv.h
View file

@ -547,14 +547,7 @@
* *
* Assumption: advance = k * (delta velocity) * Assumption: advance = k * (delta velocity)
* K=0 means advance disabled. * K=0 means advance disabled.
* To get a rough start value for calibration, measure your "free filament length" * See Marlin documentation for calibration instructions.
* between the hobbed bolt and the nozzle (in cm). Use the formula below that fits
* your setup, where L is the "free filament length":
*
* Filament diameter | 1.75mm | 3.0mm |
* ----------------------------|-----------|------------|
* Stiff filament (PLA) | K=47*L/10 | K=139*L/10 |
* Softer filament (ABS, nGen) | K=88*L/10 | K=260*L/10 |
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE

9
Marlin/example_configurations/RigidBot/Configuration_adv.h
View file

@ -547,14 +547,7 @@
* *
* Assumption: advance = k * (delta velocity) * Assumption: advance = k * (delta velocity)
* K=0 means advance disabled. * K=0 means advance disabled.
* To get a rough start value for calibration, measure your "free filament length" * See Marlin documentation for calibration instructions.
* between the hobbed bolt and the nozzle (in cm). Use the formula below that fits
* your setup, where L is the "free filament length":
*
* Filament diameter | 1.75mm | 3.0mm |
* ----------------------------|-----------|------------|
* Stiff filament (PLA) | K=47*L/10 | K=139*L/10 |
* Softer filament (ABS, nGen) | K=88*L/10 | K=260*L/10 |
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE

9
Marlin/example_configurations/SCARA/Configuration_adv.h
View file

@ -547,14 +547,7 @@
* *
* Assumption: advance = k * (delta velocity) * Assumption: advance = k * (delta velocity)
* K=0 means advance disabled. * K=0 means advance disabled.
* To get a rough start value for calibration, measure your "free filament length" * See Marlin documentation for calibration instructions.
* between the hobbed bolt and the nozzle (in cm). Use the formula below that fits
* your setup, where L is the "free filament length":
*
* Filament diameter | 1.75mm | 3.0mm |
* ----------------------------|-----------|------------|
* Stiff filament (PLA) | K=47*L/10 | K=139*L/10 |
* Softer filament (ABS, nGen) | K=88*L/10 | K=260*L/10 |
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE

9
Marlin/example_configurations/TAZ4/Configuration_adv.h
View file

@ -555,14 +555,7 @@
* *
* Assumption: advance = k * (delta velocity) * Assumption: advance = k * (delta velocity)
* K=0 means advance disabled. * K=0 means advance disabled.
* To get a rough start value for calibration, measure your "free filament length" * See Marlin documentation for calibration instructions.
* between the hobbed bolt and the nozzle (in cm). Use the formula below that fits
* your setup, where L is the "free filament length":
*
* Filament diameter | 1.75mm | 3.0mm |
* ----------------------------|-----------|------------|
* Stiff filament (PLA) | K=47*L/10 | K=139*L/10 |
* Softer filament (ABS, nGen) | K=88*L/10 | K=260*L/10 |
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE

9
Marlin/example_configurations/WITBOX/Configuration_adv.h
View file

@ -547,14 +547,7 @@
* *
* Assumption: advance = k * (delta velocity) * Assumption: advance = k * (delta velocity)
* K=0 means advance disabled. * K=0 means advance disabled.
* To get a rough start value for calibration, measure your "free filament length" * See Marlin documentation for calibration instructions.
* between the hobbed bolt and the nozzle (in cm). Use the formula below that fits
* your setup, where L is the "free filament length":
*
* Filament diameter | 1.75mm | 3.0mm |
* ----------------------------|-----------|------------|
* Stiff filament (PLA) | K=47*L/10 | K=139*L/10 |
* Softer filament (ABS, nGen) | K=88*L/10 | K=260*L/10 |
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE

9
Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
View file

@ -549,14 +549,7 @@
* *
* Assumption: advance = k * (delta velocity) * Assumption: advance = k * (delta velocity)
* K=0 means advance disabled. * K=0 means advance disabled.
* To get a rough start value for calibration, measure your "free filament length" * See Marlin documentation for calibration instructions.
* between the hobbed bolt and the nozzle (in cm). Use the formula below that fits
* your setup, where L is the "free filament length":
*
* Filament diameter | 1.75mm | 3.0mm |
* ----------------------------|-----------|------------|
* Stiff filament (PLA) | K=47*L/10 | K=139*L/10 |
* Softer filament (ABS, nGen) | K=88*L/10 | K=260*L/10 |
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE

9
Marlin/example_configurations/delta/generic/Configuration_adv.h
View file

@ -549,14 +549,7 @@
* *
* Assumption: advance = k * (delta velocity) * Assumption: advance = k * (delta velocity)
* K=0 means advance disabled. * K=0 means advance disabled.
* To get a rough start value for calibration, measure your "free filament length" * See Marlin documentation for calibration instructions.
* between the hobbed bolt and the nozzle (in cm). Use the formula below that fits
* your setup, where L is the "free filament length":
*
* Filament diameter | 1.75mm | 3.0mm |
* ----------------------------|-----------|------------|
* Stiff filament (PLA) | K=47*L/10 | K=139*L/10 |
* Softer filament (ABS, nGen) | K=88*L/10 | K=260*L/10 |
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE

9
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
View file

@ -549,14 +549,7 @@
* *
* Assumption: advance = k * (delta velocity) * Assumption: advance = k * (delta velocity)
* K=0 means advance disabled. * K=0 means advance disabled.
* To get a rough start value for calibration, measure your "free filament length" * See Marlin documentation for calibration instructions.
* between the hobbed bolt and the nozzle (in cm). Use the formula below that fits
* your setup, where L is the "free filament length":
*
* Filament diameter | 1.75mm | 3.0mm |
* ----------------------------|-----------|------------|
* Stiff filament (PLA) | K=47*L/10 | K=139*L/10 |
* Softer filament (ABS, nGen) | K=88*L/10 | K=260*L/10 |
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE

9
Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
View file

@ -554,14 +554,7 @@
* *
* Assumption: advance = k * (delta velocity) * Assumption: advance = k * (delta velocity)
* K=0 means advance disabled. * K=0 means advance disabled.
* To get a rough start value for calibration, measure your "free filament length" * See Marlin documentation for calibration instructions.
* between the hobbed bolt and the nozzle (in cm). Use the formula below that fits
* your setup, where L is the "free filament length":
*
* Filament diameter | 1.75mm | 3.0mm |
* ----------------------------|-----------|------------|
* Stiff filament (PLA) | K=47*L/10 | K=139*L/10 |
* Softer filament (ABS, nGen) | K=88*L/10 | K=260*L/10 |
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE

9
Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
View file

@ -549,14 +549,7 @@
* *
* Assumption: advance = k * (delta velocity) * Assumption: advance = k * (delta velocity)
* K=0 means advance disabled. * K=0 means advance disabled.
* To get a rough start value for calibration, measure your "free filament length" * See Marlin documentation for calibration instructions.
* between the hobbed bolt and the nozzle (in cm). Use the formula below that fits
* your setup, where L is the "free filament length":
*
* Filament diameter | 1.75mm | 3.0mm |
* ----------------------------|-----------|------------|
* Stiff filament (PLA) | K=47*L/10 | K=139*L/10 |
* Softer filament (ABS, nGen) | K=88*L/10 | K=260*L/10 |
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE

9
Marlin/example_configurations/makibox/Configuration_adv.h
View file

@ -547,14 +547,7 @@
* *
* Assumption: advance = k * (delta velocity) * Assumption: advance = k * (delta velocity)
* K=0 means advance disabled. * K=0 means advance disabled.
* To get a rough start value for calibration, measure your "free filament length" * See Marlin documentation for calibration instructions.
* between the hobbed bolt and the nozzle (in cm). Use the formula below that fits
* your setup, where L is the "free filament length":
*
* Filament diameter | 1.75mm | 3.0mm |
* ----------------------------|-----------|------------|
* Stiff filament (PLA) | K=47*L/10 | K=139*L/10 |
* Softer filament (ABS, nGen) | K=88*L/10 | K=260*L/10 |
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE

9
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
View file

@ -547,14 +547,7 @@
* *
* Assumption: advance = k * (delta velocity) * Assumption: advance = k * (delta velocity)
* K=0 means advance disabled. * K=0 means advance disabled.
* To get a rough start value for calibration, measure your "free filament length" * See Marlin documentation for calibration instructions.
* between the hobbed bolt and the nozzle (in cm). Use the formula below that fits
* your setup, where L is the "free filament length":
*
* Filament diameter | 1.75mm | 3.0mm |
* ----------------------------|-----------|------------|
* Stiff filament (PLA) | K=47*L/10 | K=139*L/10 |
* Softer filament (ABS, nGen) | K=88*L/10 | K=260*L/10 |
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE

130
Marlin/stepper.cpp
View file

@ -91,8 +91,9 @@ volatile uint32_t Stepper::step_events_completed = 0; // The number of step even
#if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE) #if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE)
uint8_t Stepper::old_OCR0A = 0; uint16_t Stepper::nextMainISR = 0,
volatile uint8_t Stepper::eISR_Rate = 200; // Keep the ISR at a low rate until needed Stepper::nextAdvanceISR = 65535,
Stepper::eISR_Rate = 65535;
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
volatile int Stepper::e_steps[E_STEPPERS]; volatile int Stepper::e_steps[E_STEPPERS];
@ -328,16 +329,23 @@ void Stepper::set_directions() {
* 2000 1 KHz - sleep rate * 2000 1 KHz - sleep rate
* 4000 500 Hz - init rate * 4000 500 Hz - init rate
*/ */
ISR(TIMER1_COMPA_vect) { Stepper::isr(); } ISR(TIMER1_COMPA_vect) {
#if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE)
Stepper::advance_isr_scheduler();
#else
Stepper::isr();
#endif
}
void Stepper::isr() { void Stepper::isr() {
//Disable Timer0 ISRs and enable global ISR again to capture UART events (incoming chars) #define _ENABLE_ISRs() cli(); SBI(TIMSK0, OCIE0B); ENABLE_STEPPER_DRIVER_INTERRUPT()
#if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE)
CBI(TIMSK0, OCIE0A); //estepper ISR #if DISABLED(ADVANCE) && DISABLED(LIN_ADVANCE)
//Disable Timer0 ISRs and enable global ISR again to capture UART events (incoming chars)
CBI(TIMSK0, OCIE0B); //Temperature ISR
DISABLE_STEPPER_DRIVER_INTERRUPT();
sei();
#endif #endif
CBI(TIMSK0, OCIE0B); //Temperature ISR
DISABLE_STEPPER_DRIVER_INTERRUPT();
sei();
if (cleaning_buffer_counter) { if (cleaning_buffer_counter) {
--cleaning_buffer_counter; --cleaning_buffer_counter;
@ -346,13 +354,8 @@ void Stepper::isr() {
#ifdef SD_FINISHED_RELEASECOMMAND #ifdef SD_FINISHED_RELEASECOMMAND
if (!cleaning_buffer_counter && (SD_FINISHED_STEPPERRELEASE)) enqueue_and_echo_commands_P(PSTR(SD_FINISHED_RELEASECOMMAND)); if (!cleaning_buffer_counter && (SD_FINISHED_STEPPERRELEASE)) enqueue_and_echo_commands_P(PSTR(SD_FINISHED_RELEASECOMMAND));
#endif #endif
OCR1A = 200; // Run at max speed - 10 KHz _NEXT_ISR(200); // Run at max speed - 10 KHz
//re-enable ISRs _ENABLE_ISRs(); // re-enable ISRs
#if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE)
SBI(TIMSK0, OCIE0A);
#endif
SBI(TIMSK0, OCIE0B);
ENABLE_STEPPER_DRIVER_INTERRUPT();
return; return;
} }
@ -381,12 +384,8 @@ void Stepper::isr() {
#if ENABLED(Z_LATE_ENABLE) #if ENABLED(Z_LATE_ENABLE)
if (current_block->steps[Z_AXIS] > 0) { if (current_block->steps[Z_AXIS] > 0) {
enable_z(); enable_z();
OCR1A = 2000; // Run at slow speed - 1 KHz _NEXT_ISR(2000); // Run at slow speed - 1 KHz
#if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE) _ENABLE_ISRs(); // re-enable ISRs
SBI(TIMSK0, OCIE0A);
#endif
SBI(TIMSK0, OCIE0B);
ENABLE_STEPPER_DRIVER_INTERRUPT();
return; return;
} }
#endif #endif
@ -396,12 +395,8 @@ void Stepper::isr() {
// #endif // #endif
} }
else { else {
OCR1A = 2000; // Run at slow speed - 1 KHz _NEXT_ISR(2000); // Run at slow speed - 1 KHz
#if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE) _ENABLE_ISRs(); // re-enable ISRs
SBI(TIMSK0, OCIE0A);
#endif
SBI(TIMSK0, OCIE0B);
ENABLE_STEPPER_DRIVER_INTERRUPT();
return; return;
} }
} }
@ -586,7 +581,7 @@ void Stepper::isr() {
#if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE) #if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE)
// If we have esteps to execute, fire the next advance_isr "now" // If we have esteps to execute, fire the next advance_isr "now"
if (e_steps[TOOL_E_INDEX]) OCR0A = TCNT0 + 2; if (e_steps[TOOL_E_INDEX]) nextAdvanceISR = 0;
#endif #endif
// Calculate new timer value // Calculate new timer value
@ -600,7 +595,7 @@ void Stepper::isr() {
// step_rate to timer interval // step_rate to timer interval
uint16_t timer = calc_timer(acc_step_rate); uint16_t timer = calc_timer(acc_step_rate);
OCR1A = timer; _NEXT_ISR(timer);
acceleration_time += timer; acceleration_time += timer;
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
@ -637,7 +632,7 @@ void Stepper::isr() {
#endif // ADVANCE or LIN_ADVANCE #endif // ADVANCE or LIN_ADVANCE
#if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE) #if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE)
eISR_Rate = (timer >> 3) * step_loops / abs(e_steps[TOOL_E_INDEX]); //>> 3 is divide by 8. Reason: Timer 1 runs at 16/8=2MHz, Timer 0 at 16/64=0.25MHz. ==> 2/0.25=8. eISR_Rate = !e_steps[TOOL_E_INDEX] ? 65535 : timer * step_loops / abs(e_steps[TOOL_E_INDEX]);
#endif #endif
} }
else if (step_events_completed > (uint32_t)current_block->decelerate_after) { else if (step_events_completed > (uint32_t)current_block->decelerate_after) {
@ -653,7 +648,7 @@ void Stepper::isr() {
// step_rate to timer interval // step_rate to timer interval
uint16_t timer = calc_timer(step_rate); uint16_t timer = calc_timer(step_rate);
OCR1A = timer; _NEXT_ISR(timer);
deceleration_time += timer; deceleration_time += timer;
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
@ -688,7 +683,7 @@ void Stepper::isr() {
#endif // ADVANCE or LIN_ADVANCE #endif // ADVANCE or LIN_ADVANCE
#if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE) #if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE)
eISR_Rate = (timer >> 3) * step_loops / abs(e_steps[TOOL_E_INDEX]); eISR_Rate = !e_steps[TOOL_E_INDEX] ? 65535 : timer * step_loops / abs(e_steps[TOOL_E_INDEX]);
#endif #endif
} }
else { else {
@ -698,40 +693,37 @@ void Stepper::isr() {
if (current_block->use_advance_lead) if (current_block->use_advance_lead)
current_estep_rate[TOOL_E_INDEX] = final_estep_rate; current_estep_rate[TOOL_E_INDEX] = final_estep_rate;
eISR_Rate = (OCR1A_nominal >> 3) * step_loops_nominal / abs(e_steps[TOOL_E_INDEX]); eISR_Rate = !e_steps[TOOL_E_INDEX] ? 65535 : OCR1A_nominal * step_loops_nominal / abs(e_steps[TOOL_E_INDEX]);
#endif #endif
OCR1A = OCR1A_nominal; _NEXT_ISR(OCR1A_nominal);
// ensure we're running at the correct step rate, even if we just came off an acceleration // ensure we're running at the correct step rate, even if we just came off an acceleration
step_loops = step_loops_nominal; step_loops = step_loops_nominal;
} }
NOLESS(OCR1A, TCNT1 + 16); #if DISABLED(ADVANCE) && DISABLED(LIN_ADVANCE)
NOLESS(OCR1A, TCNT1 + 16);
#endif
// If current block is finished, reset pointer // If current block is finished, reset pointer
if (all_steps_done) { if (all_steps_done) {
current_block = NULL; current_block = NULL;
planner.discard_current_block(); planner.discard_current_block();
} }
#if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE) #if DISABLED(ADVANCE) && DISABLED(LIN_ADVANCE)
SBI(TIMSK0, OCIE0A); _ENABLE_ISRs(); // re-enable ISRs
#endif #endif
SBI(TIMSK0, OCIE0B);
ENABLE_STEPPER_DRIVER_INTERRUPT();
} }
#if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE) #if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE)
// Timer interrupt for E. e_steps is set in the main routine; // Timer interrupt for E. e_steps is set in the main routine;
// Timer 0 is shared with millies
ISR(TIMER0_COMPA_vect) { Stepper::advance_isr(); }
void Stepper::advance_isr() { void Stepper::advance_isr() {
old_OCR0A += eISR_Rate; nextAdvanceISR = eISR_Rate;
OCR0A = old_OCR0A;
#define SET_E_STEP_DIR(INDEX) \ #define SET_E_STEP_DIR(INDEX) \
if (e_steps[INDEX]) E## INDEX ##_DIR_WRITE(e_steps[INDEX] < 0 ? INVERT_E## INDEX ##_DIR : !INVERT_E## INDEX ##_DIR) if (e_steps[INDEX]) E## INDEX ##_DIR_WRITE(e_steps[INDEX] < 0 ? INVERT_E## INDEX ##_DIR : !INVERT_E## INDEX ##_DIR)
@ -795,6 +787,46 @@ void Stepper::isr() {
} }
void Stepper::advance_isr_scheduler() {
// Disable Timer0 ISRs and enable global ISR again to capture UART events (incoming chars)
CBI(TIMSK0, OCIE0B); // Temperature ISR
DISABLE_STEPPER_DRIVER_INTERRUPT();
sei();
// Run main stepping ISR if flagged
if (!nextMainISR) isr();
// Run Advance stepping ISR if flagged
if (!nextAdvanceISR) advance_isr();
// Is the next advance ISR scheduled before the next main ISR?
if (nextAdvanceISR <= nextMainISR) {
// Set up the next interrupt
OCR1A = nextAdvanceISR;
// New interval for the next main ISR
if (nextMainISR) nextMainISR -= nextAdvanceISR;
// Will call Stepper::advance_isr on the next interrupt
nextAdvanceISR = 0;
}
else {
// The next main ISR comes first
OCR1A = nextMainISR;
// New interval for the next advance ISR, if any
if (nextAdvanceISR && nextAdvanceISR != 65535)
nextAdvanceISR -= nextMainISR;
// Will call Stepper::isr on the next interrupt
nextMainISR = 0;
}
// Don't run the ISR faster than possible
NOLESS(OCR1A, TCNT1 + 16);
// Restore original ISR settings
cli();
SBI(TIMSK0, OCIE0B);
ENABLE_STEPPER_DRIVER_INTERRUPT();
}
#endif // ADVANCE or LIN_ADVANCE #endif // ADVANCE or LIN_ADVANCE
void Stepper::init() { void Stepper::init() {
@ -981,12 +1013,6 @@ void Stepper::init() {
#endif #endif
} }
#if defined(TCCR0A) && defined(WGM01)
CBI(TCCR0A, WGM01);
CBI(TCCR0A, WGM00);
#endif
SBI(TIMSK0, OCIE0A);
#endif // ADVANCE or LIN_ADVANCE #endif // ADVANCE or LIN_ADVANCE
endstops.enable(true); // Start with endstops active. After homing they can be disabled endstops.enable(true); // Start with endstops active. After homing they can be disabled

13
Marlin/stepper.h
View file

@ -105,8 +105,8 @@ class Stepper {
static volatile uint32_t step_events_completed; // The number of step events executed in the current block static volatile uint32_t step_events_completed; // The number of step events executed in the current block
#if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE) #if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE)
static uint8_t old_OCR0A; static uint16_t nextMainISR, nextAdvanceISR, eISR_Rate;
static volatile uint8_t eISR_Rate; #define _NEXT_ISR(T) nextMainISR = T
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
static volatile int e_steps[E_STEPPERS]; static volatile int e_steps[E_STEPPERS];
static int final_estep_rate; static int final_estep_rate;
@ -119,6 +119,8 @@ class Stepper {
static long advance_rate, advance, final_advance; static long advance_rate, advance, final_advance;
static long old_advance; static long old_advance;
#endif #endif
#else
#define _NEXT_ISR(T) OCR1A = T
#endif // ADVANCE or LIN_ADVANCE #endif // ADVANCE or LIN_ADVANCE
static long acceleration_time, deceleration_time; static long acceleration_time, deceleration_time;
@ -177,6 +179,7 @@ class Stepper {
#if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE) #if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE)
static void advance_isr(); static void advance_isr();
static void advance_isr_scheduler();
#endif #endif
// //
@ -318,8 +321,8 @@ class Stepper {
return timer; return timer;
} }
// Initializes the trapezoid generator from the current block. Called whenever a new // Initialize the trapezoid generator from the current block.
// block begins. // Called whenever a new block begins.
static FORCE_INLINE void trapezoid_generator_reset() { static FORCE_INLINE void trapezoid_generator_reset() {
static int8_t last_extruder = -1; static int8_t last_extruder = -1;
@ -357,7 +360,7 @@ class Stepper {
step_loops_nominal = step_loops; step_loops_nominal = step_loops;
acc_step_rate = current_block->initial_rate; acc_step_rate = current_block->initial_rate;
acceleration_time = calc_timer(acc_step_rate); acceleration_time = calc_timer(acc_step_rate);
OCR1A = acceleration_time; _NEXT_ISR(acceleration_time);
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
if (current_block->use_advance_lead) { if (current_block->use_advance_lead) {