zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Let boards set Default TMC Slave Addresses (#20498)

Browse source 
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
This commit is contained in:
Keith Bennett 2020-12-19 19:48:31 -08:00 committed by Scott Lahteine
parent a4701fbd3e
commit 87fbb89330
7 changed files with 130 additions and 32 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

32
Marlin/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file.
*/
#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0
//#define X_SLAVE_ADDRESS 0
//#define Y_SLAVE_ADDRESS 0
//#define Z_SLAVE_ADDRESS 0
//#define X2_SLAVE_ADDRESS 0
//#define Y2_SLAVE_ADDRESS 0
//#define Z2_SLAVE_ADDRESS 0
//#define Z3_SLAVE_ADDRESS 0
//#define Z4_SLAVE_ADDRESS 0
//#define E0_SLAVE_ADDRESS 0
//#define E1_SLAVE_ADDRESS 0
//#define E2_SLAVE_ADDRESS 0
//#define E3_SLAVE_ADDRESS 0
//#define E4_SLAVE_ADDRESS 0
//#define E5_SLAVE_ADDRESS 0
//#define E6_SLAVE_ADDRESS 0
//#define E7_SLAVE_ADDRESS 0
/**
* Software enable

48
Marlin/src/inc/Conditionals_post.h
View file

@ -1647,6 +1647,54 @@
#ifndef E7_INTERPOLATE
#define E7_INTERPOLATE INTERPOLATE
#endif
#ifndef X_SLAVE_ADDRESS
#define X_SLAVE_ADDRESS 0
#endif
#ifndef Y_SLAVE_ADDRESS
#define Y_SLAVE_ADDRESS 0
#endif
#ifndef Z_SLAVE_ADDRESS
#define Z_SLAVE_ADDRESS 0
#endif
#ifndef X2_SLAVE_ADDRESS
#define X2_SLAVE_ADDRESS 0
#endif
#ifndef Y2_SLAVE_ADDRESS
#define Y2_SLAVE_ADDRESS 0
#endif
#ifndef Z2_SLAVE_ADDRESS
#define Z2_SLAVE_ADDRESS 0
#endif
#ifndef Z3_SLAVE_ADDRESS
#define Z3_SLAVE_ADDRESS 0
#endif
#ifndef Z4_SLAVE_ADDRESS
#define Z4_SLAVE_ADDRESS 0
#endif
#ifndef E0_SLAVE_ADDRESS
#define E0_SLAVE_ADDRESS 0
#endif
#ifndef E1_SLAVE_ADDRESS
#define E1_SLAVE_ADDRESS 0
#endif
#ifndef E2_SLAVE_ADDRESS
#define E2_SLAVE_ADDRESS 0
#endif
#ifndef E3_SLAVE_ADDRESS
#define E3_SLAVE_ADDRESS 0
#endif
#ifndef E4_SLAVE_ADDRESS
#define E4_SLAVE_ADDRESS 0
#endif
#ifndef E5_SLAVE_ADDRESS
#define E5_SLAVE_ADDRESS 0
#endif
#ifndef E6_SLAVE_ADDRESS
#define E6_SLAVE_ADDRESS 0
#endif
#ifndef E7_SLAVE_ADDRESS
#define E7_SLAVE_ADDRESS 0
#endif
#endif
#if (HAS_E_DRIVER(TMC2660) \

14
Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_0.h
View file

@ -34,4 +34,18 @@
#define Y_HARDWARE_SERIAL MSerial4
#define Z_HARDWARE_SERIAL MSerial4
#define E0_HARDWARE_SERIAL MSerial4
// Default TMC slave addresses
#ifndef X_SLAVE_ADDRESS
#define X_SLAVE_ADDRESS 0
#endif
#ifndef Y_SLAVE_ADDRESS
#define Y_SLAVE_ADDRESS 2
#endif
#ifndef Z_SLAVE_ADDRESS
#define Z_SLAVE_ADDRESS 1
#endif
#ifndef E0_SLAVE_ADDRESS
#define E0_SLAVE_ADDRESS 3
#endif
#endif

22
Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h
View file

@ -49,13 +49,27 @@
#define CONTROLLER_FAN_PIN FAN1_PIN
#endif
/**
* TMC220x stepper drivers
* Hardware serial communication ports.
*/
#if HAS_TMC_UART
/**
* TMC220x stepper drivers
* Hardware serial communication ports
*/
#define X_HARDWARE_SERIAL MSerial4
#define Y_HARDWARE_SERIAL MSerial4
#define Z_HARDWARE_SERIAL MSerial4
#define E0_HARDWARE_SERIAL MSerial4
// Default TMC slave addresses
#ifndef X_SLAVE_ADDRESS
#define X_SLAVE_ADDRESS 0
#endif
#ifndef Y_SLAVE_ADDRESS
#define Y_SLAVE_ADDRESS 2
#endif
#ifndef Z_SLAVE_ADDRESS
#define Z_SLAVE_ADDRESS 1
#endif
#ifndef E0_SLAVE_ADDRESS
#define E0_SLAVE_ADDRESS 3
#endif
#endif

18
Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h
View file

@ -87,19 +87,30 @@
#define E0_ENABLE_PIN PC13
#if HAS_TMC_UART
/**
* TMC2208/TMC2209 stepper drivers
*/
//
// Hardware serial with switch
//
#define X_HARDWARE_SERIAL MSerial2
#define Y_HARDWARE_SERIAL MSerial2
#define Z_HARDWARE_SERIAL MSerial2
#define E0_HARDWARE_SERIAL MSerial2
// Default TMC slave addresses
#ifndef X_SLAVE_ADDRESS
#define X_SLAVE_ADDRESS 0
#endif
#ifndef Y_SLAVE_ADDRESS
#define Y_SLAVE_ADDRESS 1
#endif
#ifndef Z_SLAVE_ADDRESS
#define Z_SLAVE_ADDRESS 2
#endif
#ifndef E0_SLAVE_ADDRESS
#define E0_SLAVE_ADDRESS 3
#endif
// The 4xTMC2209 module doesn't have a serial multiplexer and
// needs to set *_SLAVE_ADDRESS in Configuration_adv.h for X,Y,Z,E0
#if HAS_DRIVER(TMC2208)
@ -110,7 +121,6 @@
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif
//

24
Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h
View file

@ -80,10 +80,26 @@
#define E0_DIR_PIN PC14
#define E0_ENABLE_PIN PC13
#define X_HARDWARE_SERIAL MSerial2
#define Y_HARDWARE_SERIAL MSerial2
#define Z_HARDWARE_SERIAL MSerial2
#define E0_HARDWARE_SERIAL MSerial2
#if HAS_TMC_UART
#define X_HARDWARE_SERIAL MSerial2
#define Y_HARDWARE_SERIAL MSerial2
#define Z_HARDWARE_SERIAL MSerial2
#define E0_HARDWARE_SERIAL MSerial2
// Default TMC slave addresses
#ifndef X_SLAVE_ADDRESS
#define X_SLAVE_ADDRESS 0
#endif
#ifndef Y_SLAVE_ADDRESS
#define Y_SLAVE_ADDRESS 1
#endif
#ifndef Z_SLAVE_ADDRESS
#define Z_SLAVE_ADDRESS 2
#endif
#ifndef E0_SLAVE_ADDRESS
#define E0_SLAVE_ADDRESS 3
#endif
#endif
//
// Heaters / Fans

4
buildroot/tests/STM32F103RC_btt-tests
View file

@ -17,10 +17,6 @@ opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2209
opt_set Z_DRIVER_TYPE TMC2209
opt_set E0_DRIVER_TYPE TMC2209
opt_set X_SLAVE_ADDRESS 0
opt_set Y_SLAVE_ADDRESS 1
opt_set Z_SLAVE_ADDRESS 2
opt_set E0_SLAVE_ADDRESS 3
opt_enable PINS_DEBUGGING
exec_test $1 $2 "BigTreeTech SKR Mini E3 1.0 - Basic Config with TMC2209 HW Serial" "$3"