zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

🎨 Fix/adjust warnings (#24225, #24404)

Browse source
This commit is contained in:
Keith Bennett 2022-05-22 14:32:16 -07:00 committed by Scott Lahteine
parent e570c4cc2e
commit 90074e6260
98 changed files with 176 additions and 121 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
Marlin/src/module/stepper.cpp
View file

@ -594,7 +594,7 @@ void Stepper::set_directions() {
#if DISABLED(LIN_ADVANCE) #if DISABLED(LIN_ADVANCE)
#if ENABLED(MIXING_EXTRUDER) #if ENABLED(MIXING_EXTRUDER)
// Because this is valid for the whole block we don't know // Because this is valid for the whole block we don't know
// what e-steppers will step. Likely all. Set all. // what E steppers will step. Likely all. Set all.
if (motor_direction(E_AXIS)) { if (motor_direction(E_AXIS)) {
MIXER_STEPPER_LOOP(j) REV_E_DIR(j); MIXER_STEPPER_LOOP(j) REV_E_DIR(j);
count_direction.e = -1; count_direction.e = -1;

2
Marlin/src/module/stepper.h
View file

@ -205,7 +205,7 @@
// Directions are set up for MIXING_STEPPERS - like before. // Directions are set up for MIXING_STEPPERS - like before.
// Finding the right stepper may last up to MIXING_STEPPERS loops in get_next_stepper(). // Finding the right stepper may last up to MIXING_STEPPERS loops in get_next_stepper().
// These loops are a bit faster than advancing a bresenham counter. // These loops are a bit faster than advancing a bresenham counter.
// Always only one e-stepper is stepped. // Always only one E stepper is stepped.
#define MIN_ISR_LA_LOOP_CYCLES ((MIXING_STEPPERS) * (ISR_STEPPER_CYCLES)) #define MIN_ISR_LA_LOOP_CYCLES ((MIXING_STEPPERS) * (ISR_STEPPER_CYCLES))
#else #else
#define MIN_ISR_LA_LOOP_CYCLES ISR_STEPPER_CYCLES #define MIN_ISR_LA_LOOP_CYCLES ISR_STEPPER_CYCLES

4
Marlin/src/pins/esp32/pins_E4D.h
View file

@ -31,9 +31,9 @@
#include "env_validate.h" #include "env_validate.h"
#if EXTRUDERS > 1 || E_STEPPERS > 1 #if EXTRUDERS > 1 || E_STEPPERS > 1
#error "E4d@box only supports one E Stepper. Comment out this line to continue." #error "E4d@box only supports 1 E stepper."
#elif HAS_MULTI_HOTEND #elif HAS_MULTI_HOTEND
#error "E4d@box only supports one hotend / E-stepper. Comment out this line to continue." #error "E4d@box only supports 1 hotend / E stepper."
#endif #endif
#define BOARD_INFO_NAME "E4d@box" #define BOARD_INFO_NAME "E4d@box"

4
Marlin/src/pins/esp32/pins_FYSETC_E4.h
View file

@ -31,9 +31,9 @@
#include "env_validate.h" #include "env_validate.h"
#if EXTRUDERS > 1 || E_STEPPERS > 1 #if EXTRUDERS > 1 || E_STEPPERS > 1
#error "FYSETC E4 only supports one E Stepper. Comment out this line to continue." #error "FYSETC E4 only supports 1 E stepper."
#elif HAS_MULTI_HOTEND #elif HAS_MULTI_HOTEND
#error "FYSETC E4 only supports one hotend / E-stepper. Comment out this line to continue." #error "FYSETC E4 only supports 1 hotend / E stepper."
#endif #endif
#define BOARD_INFO_NAME "FYSETC_E4" #define BOARD_INFO_NAME "FYSETC_E4"

4
Marlin/src/pins/esp32/pins_MKS_TINYBEE.h
View file

@ -31,9 +31,9 @@
#include "env_validate.h" #include "env_validate.h"
#if EXTRUDERS > 2 || E_STEPPERS > 2 #if EXTRUDERS > 2 || E_STEPPERS > 2
#error "MKS ESP Nano only supports two E Steppers. Comment out this line to continue." #error "MKS TinyBee supports up to 2 E steppers."
#elif HOTENDS > 2 #elif HOTENDS > 2
#error "MKS ESP Nano only supports two hotend / E-stepper. Comment out this line to continue." #error "MKS TinyBee supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "MKS TinyBee" #define BOARD_INFO_NAME "MKS TinyBee"

4
Marlin/src/pins/esp32/pins_MRR_ESPA.h
View file

@ -31,9 +31,9 @@
#include "env_validate.h" #include "env_validate.h"
#if EXTRUDERS > 1 || E_STEPPERS > 1 #if EXTRUDERS > 1 || E_STEPPERS > 1
#error "MRR ESPA only supports one E Stepper. Comment out this line to continue." #error "MRR ESPA only supports 1 E stepper."
#elif HAS_MULTI_HOTEND #elif HAS_MULTI_HOTEND
#error "MRR ESPA only supports one hotend / E-stepper. Comment out this line to continue." #error "MRR ESPA only supports 1 hotend / E stepper."
#endif #endif
#define BOARD_INFO_NAME "MRR ESPA" #define BOARD_INFO_NAME "MRR ESPA"

4
Marlin/src/pins/esp32/pins_MRR_ESPE.h
View file

@ -32,9 +32,9 @@
#include "env_validate.h" #include "env_validate.h"
#if EXTRUDERS > 2 || E_STEPPERS > 2 #if EXTRUDERS > 2 || E_STEPPERS > 2
#error "MRR ESPE only supports two E Steppers. Comment out this line to continue." #error "MRR ESPE supports up to 2 E steppers."
#elif HAS_MULTI_HOTEND #elif HAS_MULTI_HOTEND
#error "MRR ESPE only supports one hotend / E-stepper. Comment out this line to continue." #error "MRR ESPE only supports 1 hotend / E stepper."
#endif #endif
#define BOARD_INFO_NAME "MRR ESPE" #define BOARD_INFO_NAME "MRR ESPE"

8
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h
View file

@ -223,7 +223,9 @@
#elif ENABLED(ANET_FULL_GRAPHICS_LCD) #elif ENABLED(ANET_FULL_GRAPHICS_LCD)
#error "CAUTION! ANET_FULL_GRAPHICS_LCD requires wiring modifications. See 'pins_BTT_SKR_V1_3.h' for details. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! ANET_FULL_GRAPHICS_LCD requires wiring modifications. See 'pins_BTT_SKR_V1_3.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/** /**
* 1. Cut the tab off the LCD connector so it can be plugged into the "EXP1" connector the other way. * 1. Cut the tab off the LCD connector so it can be plugged into the "EXP1" connector the other way.
@ -257,7 +259,9 @@
#elif ENABLED(WYH_L12864) #elif ENABLED(WYH_L12864)
#error "CAUTION! WYH_L12864 requires wiring modifications. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! WYH_L12864 requires wiring modifications. See 'pins_BTT_SKR_V1_3.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/** /**
* 1. Cut the tab off the LCD connector so it can be plugged into the "EXP1" connector the other way. * 1. Cut the tab off the LCD connector so it can be plugged into the "EXP1" connector the other way.

8
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h
View file

@ -286,7 +286,9 @@
#elif HAS_WIRED_LCD #elif HAS_WIRED_LCD
#if ENABLED(ANET_FULL_GRAPHICS_LCD_ALT_WIRING) #if ENABLED(ANET_FULL_GRAPHICS_LCD_ALT_WIRING)
#error "CAUTION! ANET_FULL_GRAPHICS_LCD_ALT_WIRING requires wiring modifications. See 'pins_BTT_SKR_V1_4.h' for details. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! ANET_FULL_GRAPHICS_LCD_ALT_WIRING requires wiring modifications. See 'pins_BTT_SKR_V1_4.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/** /**
* 1. Cut the tab off the LCD connector so it can be plugged into the "EXP1" connector the other way. * 1. Cut the tab off the LCD connector so it can be plugged into the "EXP1" connector the other way.
@ -318,7 +320,9 @@
#define BEEPER_PIN EXP1_08_PIN #define BEEPER_PIN EXP1_08_PIN
#elif ENABLED(ANET_FULL_GRAPHICS_LCD) #elif ENABLED(ANET_FULL_GRAPHICS_LCD)
#error "CAUTION! ANET_FULL_GRAPHICS_LCD requires wiring modifications. See 'pins_BTT_SKR_V1_4.h' for details. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! ANET_FULL_GRAPHICS_LCD requires wiring modifications. See 'pins_BTT_SKR_V1_4.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/** /**
* 1. Cut the tab off the LCD connector so it can be plugged into the "EXP1" connector the other way. * 1. Cut the tab off the LCD connector so it can be plugged into the "EXP1" connector the other way.

4
Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h
View file

@ -307,7 +307,9 @@
#elif ENABLED(ZONESTAR_LCD) #elif ENABLED(ZONESTAR_LCD)
#error "CAUTION! ZONESTAR_LCD on REARM requires wiring modifications. NB. ADCs are not 5V tolerant. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! ZONESTAR_LCD on REARM requires wiring modifications. NB. ADCs are not 5V tolerant. See 'pins_RAMPS_RE_ARM.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
#elif IS_TFTGLCD_PANEL #elif IS_TFTGLCD_PANEL

8
Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h
View file

@ -204,7 +204,9 @@
#define EXP1_08_PIN P0_18 #define EXP1_08_PIN P0_18
#if HAS_DWIN_E3V2 || IS_DWIN_MARLINUI #if HAS_DWIN_E3V2 || IS_DWIN_MARLINUI
#error "Ender-3 V2 display requires a custom cable with TX = P0_15, RX = P0_16. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! Ender-3 V2 display requires a custom cable with TX = P0_15, RX = P0_16. See 'pins_BTT_SKR_E3_TURBO.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/** /**
* Ender 3 V2 display SKR E3 Turbo (EXP1) Ender 3 V2 display --> SKR E3 Turbo * Ender 3 V2 display SKR E3 Turbo (EXP1) Ender 3 V2 display --> SKR E3 Turbo
@ -238,7 +240,9 @@
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD! #elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_E3_TURBO.h' for details. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_E3_TURBO.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
#define LCD_PINS_RS EXP1_06_PIN #define LCD_PINS_RS EXP1_06_PIN
#define LCD_PINS_ENABLE EXP1_02_PIN #define LCD_PINS_ENABLE EXP1_02_PIN

2
Marlin/src/pins/mega/pins_MEGACONTROLLER.h
View file

@ -26,7 +26,7 @@
*/ */
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "Mega Controller supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "Mega Controller supports up to 2 hotends / E steppers."
#endif #endif
#include "env_validate.h" #include "env_validate.h"

2
Marlin/src/pins/mega/pins_MINITRONICS.h
View file

@ -34,7 +34,7 @@
#if NOT_TARGET(__AVR_ATmega1281__) #if NOT_TARGET(__AVR_ATmega1281__)
#error "Oops! Select 'Minitronics' in 'Tools > Board.'" #error "Oops! Select 'Minitronics' in 'Tools > Board.'"
#elif HOTENDS > 2 || E_STEPPERS > 2 #elif HOTENDS > 2 || E_STEPPERS > 2
#error "Minitronics supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "Minitronics supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "Minitronics v1.0/1.1" #define BOARD_INFO_NAME "Minitronics v1.0/1.1"

2
Marlin/src/pins/mega/pins_OVERLORD.h
View file

@ -26,7 +26,7 @@
*/ */
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "Overlord Controller supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "Overlord supports up to 2 hotends / E steppers."
#endif #endif
#include "env_validate.h" #include "env_validate.h"

2
Marlin/src/pins/ramps/pins_AZTEEG_X3.h
View file

@ -29,7 +29,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "Azteeg X3 supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "Azteeg X3 supports up to 2 hotends / E steppers."
#endif #endif
#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) #if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT)

2
Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h
View file

@ -29,7 +29,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 5 || E_STEPPERS > 5 #if HOTENDS > 5 || E_STEPPERS > 5
#error "Azteeg X3 Pro supports up to 5 hotends / E-steppers. Comment out this line to continue." #error "Azteeg X3 Pro supports up to 5 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "Azteeg X3 Pro" #define BOARD_INFO_NAME "Azteeg X3 Pro"

2
Marlin/src/pins/ramps/pins_BAM_DICE_DUE.h
View file

@ -26,7 +26,7 @@
*/ */
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "2PrintBeta Due supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "2PrintBeta Due supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "2PrintBeta Due" #define BOARD_INFO_NAME "2PrintBeta Due"

2
Marlin/src/pins/ramps/pins_BIQU_KFB_2.h
View file

@ -26,7 +26,7 @@
*/ */
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "KFB 2.0 supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "KFB 2.0 supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "KFB 2.0" #define BOARD_INFO_NAME "KFB 2.0"

2
Marlin/src/pins/ramps/pins_DAGOMA_F5.h
View file

@ -22,7 +22,7 @@
#pragma once #pragma once
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "Dagoma3D F5 supports only 2 hotends / E-steppers. Comment out this line to continue." #error "Dagoma3D F5 supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "Dagoma3D F5" #define BOARD_INFO_NAME "Dagoma3D F5"

2
Marlin/src/pins/ramps/pins_FELIX2.h
View file

@ -26,7 +26,7 @@
*/ */
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "Felix 2.0+ supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "Felix 2.0+ supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "Felix 2.0+" #define BOARD_INFO_NAME "Felix 2.0+"

2
Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h
View file

@ -29,7 +29,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 3 || E_STEPPERS > 3 #if HOTENDS > 3 || E_STEPPERS > 3
#error "Formbot supports up to 3 hotends / E-steppers. Comment out this line to continue." #error "Formbot supports up to 3 hotends / E steppers."
#endif #endif
#ifndef BOARD_INFO_NAME #ifndef BOARD_INFO_NAME

2
Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h
View file

@ -29,7 +29,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "Formbot supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "Formbot supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "Formbot" #define BOARD_INFO_NAME "Formbot"

2
Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h
View file

@ -29,7 +29,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "Formbot supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "Formbot supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "Formbot" #define BOARD_INFO_NAME "Formbot"

2
Marlin/src/pins/ramps/pins_K8600.h
View file

@ -26,7 +26,7 @@
*/ */
#if HAS_MULTI_HOTEND #if HAS_MULTI_HOTEND
#error "Only 1 hotend is supported for Vertex Nano." #error "K8600 only supports 1 hotend / E stepper."
#endif #endif
#define BOARD_INFO_NAME "K8600" #define BOARD_INFO_NAME "K8600"

2
Marlin/src/pins/ramps/pins_LONGER3D_LKx_PRO.h
View file

@ -29,7 +29,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HAS_MULTI_HOTEND || E_STEPPERS > 1 #if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "Longer3D LGT KIT V1.0 board only supports one hotend / E-stepper. Comment out this line to continue." #error "Longer3D LGT KIT V1.0 only supports 1 hotend / E stepper."
#endif #endif
#if SERIAL_PORT == 1 || SERIAL_PORT_2 == 1 || SERIAL_PORT_3 == 1 #if SERIAL_PORT == 1 || SERIAL_PORT_2 == 1 || SERIAL_PORT_3 == 1

2
Marlin/src/pins/ramps/pins_MKS_BASE_10.h
View file

@ -28,7 +28,7 @@
*/ */
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS BASE 1.0 supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "MKS BASE 1.0 supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "MKS BASE 1.0" #define BOARD_INFO_NAME "MKS BASE 1.0"

2
Marlin/src/pins/ramps/pins_MKS_BASE_14.h
View file

@ -26,7 +26,7 @@
*/ */
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS BASE 1.4 only supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "MKS BASE 1.4 supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "MKS BASE 1.4" #define BOARD_INFO_NAME "MKS BASE 1.4"

2
Marlin/src/pins/ramps/pins_MKS_BASE_15.h
View file

@ -26,7 +26,7 @@
*/ */
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS BASE 1.5 only supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "MKS BASE 1.5 supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "MKS BASE 1.5" #define BOARD_INFO_NAME "MKS BASE 1.5"

2
Marlin/src/pins/ramps/pins_MKS_BASE_16.h
View file

@ -26,7 +26,7 @@
*/ */
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS BASE 1.6 only supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "MKS BASE 1.6 supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "MKS BASE 1.6" #define BOARD_INFO_NAME "MKS BASE 1.6"

2
Marlin/src/pins/ramps/pins_MKS_GEN_13.h
View file

@ -31,7 +31,7 @@
*/ */
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS GEN 1.3/1.4 supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "MKS GEN 1.3/1.4 supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "MKS GEN >= v1.3" #define BOARD_INFO_NAME "MKS GEN >= v1.3"

2
Marlin/src/pins/ramps/pins_MKS_GEN_L.h
View file

@ -26,7 +26,7 @@
*/ */
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS GEN L supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "MKS GEN L supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "MKS GEN L" #define BOARD_INFO_NAME "MKS GEN L"

2
Marlin/src/pins/ramps/pins_MKS_GEN_L_V2.h
View file

@ -26,7 +26,7 @@
*/ */
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS GEN L V2 supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "MKS GEN L V2 supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "MKS GEN L V2" #define BOARD_INFO_NAME "MKS GEN L V2"

2
Marlin/src/pins/ramps/pins_MKS_GEN_L_V21.h
View file

@ -26,7 +26,7 @@
*/ */
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS GEN L V2.1 supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "MKS GEN L V2.1 supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "MKS GEN L V2.1" #define BOARD_INFO_NAME "MKS GEN L V2.1"

9
Marlin/src/pins/ramps/pins_RAMPS.h
View file

@ -592,7 +592,10 @@
#elif ENABLED(ZONESTAR_LCD) #elif ENABLED(ZONESTAR_LCD)
#error "CAUTION! ZONESTAR_LCD on RAMPS requires wiring modifications. It plugs into AUX2 but GND and 5V need to be swapped. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! ZONESTAR_LCD on RAMPS requires wiring modifications. It plugs into AUX2 but GND and 5V need to be swapped. See 'pins_RAMPS.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
#define LCD_PINS_RS AUX2_05_PIN #define LCD_PINS_RS AUX2_05_PIN
#define LCD_PINS_ENABLE AUX2_07_PIN #define LCD_PINS_ENABLE AUX2_07_PIN
#define LCD_PINS_D4 AUX2_04_PIN #define LCD_PINS_D4 AUX2_04_PIN
@ -859,7 +862,9 @@
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) #if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_RAMPS.h' for details. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_RAMPS.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/** /**
* FYSETC TFT-81050 display pinout * FYSETC TFT-81050 display pinout

2
Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h
View file

@ -22,7 +22,7 @@
#pragma once #pragma once
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "Creality3D RAMPS supports only 2 hotends / E-steppers. Comment out this line to continue." #error "Creality RAMPS supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "Creality3D RAMPS" #define BOARD_INFO_NAME "Creality3D RAMPS"

2
Marlin/src/pins/ramps/pins_RAMPS_ENDER_4.h
View file

@ -22,7 +22,7 @@
#pragma once #pragma once
#if HAS_MULTI_HOTEND || E_STEPPERS > 1 #if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "Ender-4 only supports one hotend / E-stepper. Comment out this line to continue." #error "Ender-4 only supports 1 hotend / E stepper."
#endif #endif
#define BOARD_INFO_NAME "Ender-4" #define BOARD_INFO_NAME "Ender-4"

4
Marlin/src/pins/ramps/pins_RL200.h
View file

@ -30,9 +30,9 @@
#define DEFAULT_MACHINE_NAME "Rapide Lite 200" #define DEFAULT_MACHINE_NAME "Rapide Lite 200"
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "RL200v1 supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "RL200v1 supports up to 2 hotends / E steppers."
#elif NUM_Z_STEPPERS != 2 #elif NUM_Z_STEPPERS != 2
#error "RL200 uses dual Z stepper motors. Set NUM_Z_STEPPERS to 2 or comment out this line to continue." #error "RL200 uses dual Z stepper motors. Z_DRIVER_TYPE and Z2_DRIVER_TYPE must be defined."
#elif !(AXIS_DRIVER_TYPE_X(DRV8825) && AXIS_DRIVER_TYPE_Y(DRV8825) && AXIS_DRIVER_TYPE_Z(DRV8825) && AXIS_DRIVER_TYPE_Z2(DRV8825) && AXIS_DRIVER_TYPE_E0(DRV8825)) #elif !(AXIS_DRIVER_TYPE_X(DRV8825) && AXIS_DRIVER_TYPE_Y(DRV8825) && AXIS_DRIVER_TYPE_Z(DRV8825) && AXIS_DRIVER_TYPE_Z2(DRV8825) && AXIS_DRIVER_TYPE_E0(DRV8825))
#error "You must set ([XYZ]|Z2|E0)_DRIVER_TYPE to DRV8825 in Configuration.h for RL200." #error "You must set ([XYZ]|Z2|E0)_DRIVER_TYPE to DRV8825 in Configuration.h for RL200."
#endif #endif

2
Marlin/src/pins/ramps/pins_RUMBA.h
View file

@ -29,7 +29,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 3 || E_STEPPERS > 3 #if HOTENDS > 3 || E_STEPPERS > 3
#error "RUMBA supports up to 3 hotends / E-steppers. Comment out this line to continue." #error "RUMBA supports up to 3 hotends / E steppers."
#endif #endif
#ifndef BOARD_INFO_NAME #ifndef BOARD_INFO_NAME

2
Marlin/src/pins/ramps/pins_SAINSMART_2IN1.h
View file

@ -26,7 +26,7 @@
*/ */
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "Sainsmart 2-in-1 supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "Sainsmart 2-in-1 supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "Sainsmart" #define BOARD_INFO_NAME "Sainsmart"

2
Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h
View file

@ -29,7 +29,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "Tenlog supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "Tenlog supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "Tenlog D3 Hero" #define BOARD_INFO_NAME "Tenlog D3 Hero"

2
Marlin/src/pins/ramps/pins_TRONXY_V3_1_0.h
View file

@ -29,7 +29,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "TRONXY-V3-1.0 supports only 2 hotends/E-steppers. Comment out this line to continue." #error "TRONXY-V3-1.0 supports up to 2 hotends/E steppers."
#endif #endif
#define BOARD_INFO_NAME "TRONXY-V3-1.0" #define BOARD_INFO_NAME "TRONXY-V3-1.0"

2
Marlin/src/pins/ramps/pins_TT_OSCAR.h
View file

@ -24,7 +24,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 5 || E_STEPPERS > 5 #if HOTENDS > 5 || E_STEPPERS > 5
#error "TTOSCAR supports up to 5 hotends / E-steppers. Comment out this line to continue." #error "TTOSCAR supports up to 5 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "TT OSCAR" #define BOARD_INFO_NAME "TT OSCAR"

2
Marlin/src/pins/ramps/pins_ZRIB_V52.h
View file

@ -26,7 +26,7 @@
*/ */
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "ZRIB V5.2 only supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "ZRIB V5.2 supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "ZRIB V5.2" #define BOARD_INFO_NAME "ZRIB V5.2"

4
Marlin/src/pins/ramps/pins_ZRIB_V53.h
View file

@ -28,9 +28,9 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 2 #if HOTENDS > 2
#error "ZRIB V5.3 only supports up to 2 hotends. Comment out this line to continue." #error "ZRIB V5.3 supports up to 2 hotends."
#elif E_STEPPERS > 3 #elif E_STEPPERS > 3
#error "ZRIB V5.3 only supports up to 3 E-steppers. Comment out this line to continue." #error "ZRIB V5.3 supports up to 3 E steppers."
#endif #endif
#define BOARD_INFO_NAME "ZRIB V5.3" #define BOARD_INFO_NAME "ZRIB V5.3"

2
Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h
View file

@ -29,7 +29,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 4 || E_STEPPERS > 4 #if HOTENDS > 4 || E_STEPPERS > 4
#error "Z-Bolt X Series board supports up to 4 hotends / E-steppers." #error "Z-Bolt X Series supports up to 4 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "Z-Bolt X Series" #define BOARD_INFO_NAME "Z-Bolt X Series"

8
Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h
View file

@ -182,7 +182,9 @@
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD! #elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_DIP.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
#define LCD_PINS_RS PB9 #define LCD_PINS_RS PB9
#define LCD_PINS_ENABLE PB6 #define LCD_PINS_ENABLE PB6
@ -224,7 +226,9 @@
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) #if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_E3_DIP.h' for details. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_E3_DIP.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/** FYSETC TFT TFT81050 display pinout /** FYSETC TFT TFT81050 display pinout
* *

20
Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h
View file

@ -150,7 +150,9 @@
* All pins are labeled as printed on DWIN PCB. Connect TX-TX, A-A and so on. * All pins are labeled as printed on DWIN PCB. Connect TX-TX, A-A and so on.
*/ */
#error "Ender-3 V2 display requires a custom cable, see diagram above this line. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! Ender-3 V2 display requires a custom cable. See 'pins_BTT_SKR_MINI_E3_common.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
#define BEEPER_PIN EXP1_02_PIN #define BEEPER_PIN EXP1_02_PIN
#define BTN_EN1 EXP1_08_PIN #define BTN_EN1 EXP1_08_PIN
@ -173,7 +175,9 @@
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD! #elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
#define LCD_PINS_RS PB9 #define LCD_PINS_RS PB9
#define LCD_PINS_ENABLE EXP1_02_PIN #define LCD_PINS_ENABLE EXP1_02_PIN
@ -201,7 +205,9 @@
#if ENABLED(TFTGLCD_PANEL_SPI) #if ENABLED(TFTGLCD_PANEL_SPI)
#error "CAUTION! TFTGLCD_PANEL_SPI requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! TFTGLCD_PANEL_SPI requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/** /**
* TFTGLCD_PANEL_SPI display pinout * TFTGLCD_PANEL_SPI display pinout
@ -238,7 +244,9 @@
#elif ENABLED(FYSETC_MINI_12864_2_1) #elif ENABLED(FYSETC_MINI_12864_2_1)
#error "CAUTION! FYSETC_MINI_12864_2_1 / MKS_MINI_12864_V3 / BTT_MINI_12864_V1 requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! FYSETC_MINI_12864_2_1 / MKS_MINI_12864_V3 / BTT_MINI_12864_V1 requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/** /**
* FYSETC_MINI_12864_2_1 / MKS_MINI_12864_V3 / BTT_MINI_12864_V1 display pinout * FYSETC_MINI_12864_2_1 / MKS_MINI_12864_V3 / BTT_MINI_12864_V1 display pinout
@ -309,7 +317,9 @@
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) #if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/** /**
* FYSETC TFT TFT81050 display pinout * FYSETC TFT TFT81050 display pinout

2
Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h
View file

@ -24,7 +24,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HAS_MULTI_HOTEND || E_STEPPERS > 1 #if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "CCROBOT-ONLINE MEEB_3DP only supports one hotend / E-stepper. Comment out this line to continue." #error "CCROBOT-ONLINE MEEB_3DP only supports 1 hotend / E stepper."
#endif #endif
// https://github.com/ccrobot-online/MEEB_3DP // https://github.com/ccrobot-online/MEEB_3DP

2
Marlin/src/pins/stm32f1/pins_CREALITY_V24S1_301.h
View file

@ -29,7 +29,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HAS_MULTI_HOTEND || E_STEPPERS > 1 #if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "Creality V24S1 only supports one hotend / E-stepper. Comment out this line to continue." #error "Creality v24S1 only supports 1 hotend / E stepper."
#endif #endif
#if BOTH(BLTOUCH, Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) #if BOTH(BLTOUCH, Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)

2
Marlin/src/pins/stm32f1/pins_CREALITY_V25S1.h
View file

@ -28,7 +28,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HAS_MULTI_HOTEND || E_STEPPERS > 1 #if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "Creality V2.5.S1 only supports one hotend / E-stepper. Comment out this line to continue." #error "Creality V2.5.S1 only supports 1 hotend / E stepper."
#endif #endif
#define BOARD_INFO_NAME "Creality v2.5.S1" #define BOARD_INFO_NAME "Creality v2.5.S1"

2
Marlin/src/pins/stm32f1/pins_CREALITY_V4.h
View file

@ -28,7 +28,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HAS_MULTI_HOTEND || E_STEPPERS > 1 #if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "Creality V4 only supports one hotend / E-stepper. Comment out this line to continue." #error "Creality v4 only supports 1 hotend / E stepper."
#endif #endif
#ifndef BOARD_INFO_NAME #ifndef BOARD_INFO_NAME

2
Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h
View file

@ -28,7 +28,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HAS_MULTI_HOTEND || E_STEPPERS > 1 #if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "CREALITY supports up to 1 hotends / E-steppers. Comment out this line to continue." #error "Creality v4.2.10 only supports 1 hotend / E stepper."
#endif #endif
#ifndef BOARD_INFO_NAME #ifndef BOARD_INFO_NAME

2
Marlin/src/pins/stm32f1/pins_CREALITY_V452.h
View file

@ -26,7 +26,7 @@
*/ */
#if HAS_MULTI_HOTEND || E_STEPPERS > 1 #if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "Creality v4.5.2 only supports one hotend / E-stepper. Comment out this line to continue." #error "Creality v4.5.2 only supports 1 hotend / E stepper."
#endif #endif
#define BOARD_INFO_NAME "Creality v4.5.2" #define BOARD_INFO_NAME "Creality v4.5.2"

2
Marlin/src/pins/stm32f1/pins_CREALITY_V453.h
View file

@ -26,7 +26,7 @@
*/ */
#if HAS_MULTI_HOTEND || E_STEPPERS > 1 #if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "Creality v4.5.3 only supports one hotend / E-stepper. Comment out this line to continue." #error "Creality v4.5.3 only supports 1 hotend / E stepper."
#endif #endif
#define BOARD_INFO_NAME "Creality v4.5.3" #define BOARD_INFO_NAME "Creality v4.5.3"

2
Marlin/src/pins/stm32f1/pins_ERYONE_ERY32_MINI.h
View file

@ -28,7 +28,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "Eryone Ery32 mini supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "Eryone Ery32 mini supports up to 2 hotends / E steppers."
#endif #endif
#ifndef BOARD_INFO_NAME #ifndef BOARD_INFO_NAME

2
Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h
View file

@ -32,7 +32,7 @@
#if NOT_TARGET(__STM32F1__, STM32F1xx) #if NOT_TARGET(__STM32F1__, STM32F1xx)
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#elif HAS_MULTI_HOTEND || E_STEPPERS > 1 #elif HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "FLSUN HiSpeedV1 only supports one hotend / E-stepper. Comment out this line to continue." #error "FLSUN HiSpeedV1 only supports 1 hotend / E stepper."
#endif #endif
#define BOARD_INFO_NAME "FLSun HiSpeedV1" #define BOARD_INFO_NAME "FLSun HiSpeedV1"

2
Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h
View file

@ -33,7 +33,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HAS_MULTI_HOTEND || E_STEPPERS > 1 #if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "JGAurora A5S A1 only supports one hotend / E-stepper. Comment out this line to continue." #error "JGAurora A5S A1 only supports 1 hotend / E stepper."
#endif #endif
#define BOARD_INFO_NAME "JGAurora A5S A1" #define BOARD_INFO_NAME "JGAurora A5S A1"

2
Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h
View file

@ -28,7 +28,7 @@
#if NOT_TARGET(__STM32F1__, STM32F1xx) #if NOT_TARGET(__STM32F1__, STM32F1xx)
#error "Oops! Select a STM32F1 board in 'Tools > Board.'" #error "Oops! Select a STM32F1 board in 'Tools > Board.'"
#elif HAS_MULTI_HOTEND || E_STEPPERS > 1 #elif HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "Longer3D only supports one hotend / E-stepper. Comment out this line to continue." #error "Longer3D only supports 1 hotend / E stepper."
#endif #endif
#define BOARD_INFO_NAME "Longer3D" #define BOARD_INFO_NAME "Longer3D"

2
Marlin/src/pins/stm32f1/pins_MINGDA_MPX_ARM_MINI.h
View file

@ -28,7 +28,7 @@
#if NOT_TARGET(STM32F1, STM32F1xx) #if NOT_TARGET(STM32F1, STM32F1xx)
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#elif HOTENDS > 1 || E_STEPPERS > 1 #elif HOTENDS > 1 || E_STEPPERS > 1
#error "MPX ARM Mini only supports one hotend / E-stepper. Comment out this line to continue." #error "MPX ARM Mini only supports 1 hotend / E stepper."
#endif #endif
#define BOARD_INFO_NAME "Mingda MPX ARM Mini" #define BOARD_INFO_NAME "Mingda MPX ARM Mini"

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h
View file

@ -29,7 +29,7 @@
#if NOT_TARGET(STM32F1, STM32F1xx) #if NOT_TARGET(STM32F1, STM32F1xx)
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#elif HOTENDS > 2 || E_STEPPERS > 2 #elif HOTENDS > 2 || E_STEPPERS > 2
#error "MKS Robin supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "MKS Robin supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "MKS Robin" #define BOARD_INFO_NAME "MKS Robin"

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3.h
View file

@ -26,7 +26,7 @@
*/ */
#if HAS_MULTI_HOTEND || E_STEPPERS > 1 #if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "MKS Robin E3 only supports one hotend / E-stepper. Comment out this line to continue." #error "MKS Robin E3 only supports 1 hotend / E stepper."
#endif #endif
#ifndef BOARD_INFO_NAME #ifndef BOARD_INFO_NAME

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3D.h
View file

@ -26,7 +26,7 @@
*/ */
#if HAS_MULTI_HOTEND || E_STEPPERS > 1 #if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "MKS Robin E3D only supports one hotend / E-stepper. Comment out this line to continue." #error "MKS Robin E3D only supports 1 hotend / E stepper."
#endif #endif
#ifndef BOARD_INFO_NAME #ifndef BOARD_INFO_NAME

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3D_V1_1.h
View file

@ -26,7 +26,7 @@
*/ */
#if HAS_MULTI_HOTEND || E_STEPPERS > 1 #if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "MKS Robin E3D v1.1 only supports one hotend / E-stepper. Comment out this line to continue." #error "MKS Robin E3D v1.1 only supports 1 hotend / E stepper."
#endif #endif
#ifndef BOARD_INFO_NAME #ifndef BOARD_INFO_NAME

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h
View file

@ -28,7 +28,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HAS_MULTI_HOTEND || E_STEPPERS > 1 #if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "MKS Robin E3P only supports one hotend / E-stepper. Comment out this line to continue." #error "MKS Robin E3P only supports 1 hotend / E stepper."
#elif HAS_FSMC_TFT #elif HAS_FSMC_TFT
#error "MKS Robin E3P doesn't support FSMC-based TFT displays." #error "MKS Robin E3P doesn't support FSMC-based TFT displays."
#endif #endif

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_V1_1.h
View file

@ -26,7 +26,7 @@
*/ */
#if HAS_MULTI_HOTEND || E_STEPPERS > 1 #if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "MKS Robin E3 v1.1 only supports one hotend / E-stepper. Comment out this line to continue." #error "MKS Robin E3 v1.1 only supports 1 hotend / E stepper."
#endif #endif
#ifndef BOARD_INFO_NAME #ifndef BOARD_INFO_NAME

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h
View file

@ -24,7 +24,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HAS_MULTI_HOTEND || E_STEPPERS > 1 #if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "MKS Robin Lite only supports one hotend / E-stepper. Comment out this line to continue." #error "MKS Robin Lite only supports 1 hotend / E stepper."
#endif #endif
#ifndef BOARD_INFO_NAME #ifndef BOARD_INFO_NAME

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h
View file

@ -28,7 +28,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS Robin Lite3 supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "MKS Robin Lite3 supports up to 2 hotends / E steppers."
#endif #endif
#ifndef BOARD_INFO_NAME #ifndef BOARD_INFO_NAME

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h
View file

@ -28,7 +28,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HAS_MULTI_HOTEND || E_STEPPERS > 1 #if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "MKS Robin mini only supports one hotend / E-stepper. Comment out this line to continue." #error "MKS Robin mini only supports 1 hotend / E stepper."
#endif #endif
#define BOARD_INFO_NAME "MKS Robin Mini" #define BOARD_INFO_NAME "MKS Robin Mini"

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h
View file

@ -28,7 +28,7 @@
#if NOT_TARGET(__STM32F1__, STM32F1) #if NOT_TARGET(__STM32F1__, STM32F1)
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#elif HOTENDS > 2 || E_STEPPERS > 2 #elif HOTENDS > 2 || E_STEPPERS > 2
#error "MKS Robin nano supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "MKS Robin nano supports up to 2 hotends / E steppers."
#elif HAS_FSMC_TFT #elif HAS_FSMC_TFT
#error "MKS Robin nano v2 doesn't support FSMC-based TFT displays." #error "MKS Robin nano v2 doesn't support FSMC-based TFT displays."
#endif #endif

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_common.h
View file

@ -26,7 +26,7 @@
*/ */
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS Robin nano supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "MKS Robin nano boards support up to 2 hotends / E steppers."
#endif #endif
#define BOARD_NO_NATIVE_USB #define BOARD_NO_NATIVE_USB

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h
View file

@ -28,7 +28,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 3 || E_STEPPERS > 3 #if HOTENDS > 3 || E_STEPPERS > 3
#error "MKS Robin pro supports up to 3 hotends / E-steppers. Comment out this line to continue." #error "MKS Robin pro supports up to 3 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "MKS Robin pro" #define BOARD_INFO_NAME "MKS Robin pro"

4
Marlin/src/pins/stm32f1/pins_PANDA_PI_V29.h
View file

@ -173,7 +173,9 @@
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) #if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_E3_DIP.h' for details. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_PANDA_PI_V29.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/** FYSETC TFT TFT81050 display pinout /** FYSETC TFT TFT81050 display pinout
* *

2
Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h
View file

@ -31,7 +31,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "Trigorilla Pro supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "Trigorilla Pro supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "Trigorilla Pro" #define BOARD_INFO_NAME "Trigorilla Pro"

2
Marlin/src/pins/stm32f4/pins_ANET_ET4.h
View file

@ -24,7 +24,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HAS_MULTI_HOTEND || E_STEPPERS > 1 #if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "Anet ET4 only supports one hotend / E-stepper. Comment out this line to continue." #error "Anet ET4 only supports 1 hotend / E stepper."
#endif #endif
#ifndef BOARD_INFO_NAME #ifndef BOARD_INFO_NAME

2
Marlin/src/pins/stm32f4/pins_ARMED.h
View file

@ -27,7 +27,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "Arm'ed supports up to 2 hotends / E-steppers." #error "Arm'ed supports up to 2 hotends / E steppers."
#endif #endif
#ifndef ARMED_V1_0 #ifndef ARMED_V1_0

2
Marlin/src/pins/stm32f4/pins_ARTILLERY_RUBY.h
View file

@ -24,7 +24,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 1 || E_STEPPERS > 1 #if HOTENDS > 1 || E_STEPPERS > 1
#error "Artillery Ruby supports up to 1 hotends / E-steppers." #error "Artillery Ruby only supports 1 hotend / E stepper."
#endif #endif
#define BOARD_INFO_NAME "Artillery Ruby" #define BOARD_INFO_NAME "Artillery Ruby"

2
Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h
View file

@ -31,7 +31,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "Black STM32F4VET6 supports up to 2 hotends / E-steppers." #error "Black STM32F4VET6 supports up to 2 hotends / E steppers."
#endif #endif
#ifndef BOARD_INFO_NAME #ifndef BOARD_INFO_NAME

2
Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h
View file

@ -24,7 +24,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HAS_MULTI_HOTEND || E_STEPPERS > 1 #if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "BIGTREE BTT002 V1.0 only supports one hotend / E-stepper. Comment out this line to continue." #error "BIGTREE BTT002 V1.0 only supports 1 hotend / E stepper."
#endif #endif
#define BOARD_INFO_NAME "BTT BTT002 V1.0" #define BOARD_INFO_NAME "BTT BTT002 V1.0"

16
Marlin/src/pins/stm32f4/pins_BTT_E3_RRF.h
View file

@ -211,7 +211,9 @@
#if ENABLED(LCD_FOR_MELZI) #if ENABLED(LCD_FOR_MELZI)
#error "CAUTION! LCD_FOR_MELZI requires wiring modifications. See 'pins_BTT_E3_RRF.h' for details. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! LCD_FOR_MELZI requires wiring modifications. See 'pins_BTT_E3_RRF.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/** LCD_FOR_MELZI display pinout /** LCD_FOR_MELZI display pinout
* *
@ -245,7 +247,9 @@
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD! #elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_E3_RRF.h' for details. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_E3_RRF.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
#define LCD_PINS_RS PE10 #define LCD_PINS_RS PE10
#define LCD_PINS_ENABLE PE9 #define LCD_PINS_ENABLE PE9
@ -273,7 +277,9 @@
#if ENABLED(TFTGLCD_PANEL_SPI) #if ENABLED(TFTGLCD_PANEL_SPI)
#error "CAUTION! TFTGLCD_PANEL_SPI requires wiring modifications. See 'pins_BTT_E3_RRF.h' for details. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! TFTGLCD_PANEL_SPI requires wiring modifications. See 'pins_BTT_E3_RRF.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/** /**
* TFTGLCD_PANEL_SPI display pinout * TFTGLCD_PANEL_SPI display pinout
@ -327,7 +333,9 @@
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) #if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_E3_RRF.h' for details. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_E3_RRF.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/** FYSETC TFT TFT81050 display pinout /** FYSETC TFT TFT81050 display pinout
* *

2
Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h
View file

@ -26,7 +26,7 @@
#if E_STEPPERS > MAX_E_STEPPERS #if E_STEPPERS > MAX_E_STEPPERS
#error "Marlin extruder/hotends limit! Increase MAX_E_STEPPERS to continue." #error "Marlin extruder/hotends limit! Increase MAX_E_STEPPERS to continue."
#elif HOTENDS > 8 || E_STEPPERS > 8 #elif HOTENDS > 8 || E_STEPPERS > 8
#error "BIGTREE GTR V1.0 supports up to 8 hotends / E-steppers." #error "BIGTREE GTR V1.0 supports up to 8 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "BTT GTR V1.0" #define BOARD_INFO_NAME "BTT GTR V1.0"

2
Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_V1_1.h
View file

@ -22,7 +22,7 @@
#pragma once #pragma once
#if HOTENDS > 3 || E_STEPPERS > 3 #if HOTENDS > 3 || E_STEPPERS > 3
#error "BIGTREE SKR Pro V1.1 supports up to 3 hotends / E-steppers." #error "BIGTREE SKR Pro V1.1 supports up to 3 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "BTT SKR Pro V1.1" #define BOARD_INFO_NAME "BTT SKR Pro V1.1"

2
Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_V1_2.h
View file

@ -22,7 +22,7 @@
#pragma once #pragma once
#if HOTENDS > 3 || E_STEPPERS > 3 #if HOTENDS > 3 || E_STEPPERS > 3
#error "BIGTREE SKR Pro V1.2 supports up to 3 hotends / E-steppers." #error "BIGTREE SKR Pro V1.2 supports up to 3 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "BTT SKR Pro V1.2" #define BOARD_INFO_NAME "BTT SKR Pro V1.2"

4
Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h
View file

@ -456,7 +456,9 @@
#elif ENABLED(WYH_L12864) #elif ENABLED(WYH_L12864)
#error "CAUTION! WYH_L12864 requires wiring modifications. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! WYH_L12864 requires wiring modifications. See 'pins_BTT_SKR_PRO_common.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/** /**
* 1. Cut the tab off the LCD connector so it can be plugged into the "EXP1" connector the other way. * 1. Cut the tab off the LCD connector so it can be plugged into the "EXP1" connector the other way.

2
Marlin/src/pins/stm32f4/pins_FLYF407ZG.h
View file

@ -25,7 +25,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 6 || E_STEPPERS > 6 #if HOTENDS > 6 || E_STEPPERS > 6
#error "FLYF407ZG supports up to 6 hotends / E-steppers." #error "FLYF407ZG supports up to 6 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "FLYF407ZG" #define BOARD_INFO_NAME "FLYF407ZG"

2
Marlin/src/pins/stm32f4/pins_FYSETC_S6.h
View file

@ -24,7 +24,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 3 || E_STEPPERS > 3 #if HOTENDS > 3 || E_STEPPERS > 3
#error "FYSETC S6 supports up to 3 hotends / E-steppers." #error "FYSETC S6 supports up to 3 hotends / E steppers."
#endif #endif
#ifndef BOARD_INFO_NAME #ifndef BOARD_INFO_NAME

2
Marlin/src/pins/stm32f4/pins_FYSETC_SPIDER.h
View file

@ -117,7 +117,7 @@
#endif #endif
#if HOTENDS > 3 || E_STEPPERS > 3 #if HOTENDS > 3 || E_STEPPERS > 3
#error "FYSETC SPIDER supports up to 3 hotends / E-steppers." #error "FYSETC SPIDER supports up to 3 hotends / E steppers."
#else #else
#include "pins_FYSETC_S6.h" #include "pins_FYSETC_S6.h"
#endif #endif

2
Marlin/src/pins/stm32f4/pins_LERDGE_K.h
View file

@ -25,7 +25,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "LERDGE K supports up to 2 hotends / E-steppers." #error "LERDGE K supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "Lerdge K" #define BOARD_INFO_NAME "Lerdge K"

2
Marlin/src/pins/stm32f4/pins_LERDGE_S.h
View file

@ -25,7 +25,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "LERDGE S supports up to 2 hotends / E-steppers." #error "LERDGE S supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "Lerdge S" #define BOARD_INFO_NAME "Lerdge S"

2
Marlin/src/pins/stm32f4/pins_LERDGE_X.h
View file

@ -25,7 +25,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HAS_MULTI_HOTEND || E_STEPPERS > 1 #if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "LERDGE X only supports one hotend / E-stepper. Comment out this line to continue." #error "LERDGE X only supports 1 hotend / E stepper."
#endif #endif
#define BOARD_INFO_NAME "Lerdge X" #define BOARD_INFO_NAME "Lerdge X"

2
Marlin/src/pins/stm32f4/pins_MKS_EAGLE.h
View file

@ -25,7 +25,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS Eagle supports up to 2 hotends / E-steppers." #error "MKS Eagle supports up to 2 hotends / E steppers."
#elif HAS_FSMC_TFT #elif HAS_FSMC_TFT
#error "MKS Eagle doesn't support FSMC-based TFT displays." #error "MKS Eagle doesn't support FSMC-based TFT displays."
#endif #endif

2
Marlin/src/pins/stm32f4/pins_MKS_MONSTER8_common.h
View file

@ -25,7 +25,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 3 || E_STEPPERS > 5 #if HOTENDS > 3 || E_STEPPERS > 5
#error "MKS Monster supports up to 3 hotends and 5 E-steppers." #error "MKS Monster supports up to 3 hotends and 5 E steppers."
#elif HAS_FSMC_TFT #elif HAS_FSMC_TFT
#error "MKS Monster doesn't support FSMC-based TFT displays." #error "MKS Monster doesn't support FSMC-based TFT displays."
#endif #endif

2
Marlin/src/pins/stm32f4/pins_MKS_ROBIN2.h
View file

@ -24,7 +24,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS_ROBIN2 supports up to 2 hotends / E-steppers." #error "MKS_ROBIN2 supports up to 2 hotends / E steppers."
#endif #endif
#ifndef BOARD_INFO_NAME #ifndef BOARD_INFO_NAME

2
Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h
View file

@ -25,7 +25,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS Robin Nano V3 supports up to 2 hotends / E-steppers." #error "MKS Robin Nano V3 supports up to 2 hotends / E steppers."
#elif HAS_FSMC_TFT #elif HAS_FSMC_TFT
#error "MKS Robin Nano V3 doesn't support FSMC-based TFT displays." #error "MKS Robin Nano V3 doesn't support FSMC-based TFT displays."
#endif #endif

2
Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h
View file

@ -25,7 +25,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS Robin Nano V3 supports up to 1 hotends / E-steppers." #error "MKS Robin Nano V3 supports up to 2 hotends / E steppers."
#endif #endif
#define BOARD_INFO_NAME "MKS Robin PRO V2" #define BOARD_INFO_NAME "MKS Robin PRO V2"

2
Marlin/src/pins/stm32f4/pins_RUMBA32_common.h
View file

@ -28,7 +28,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 3 || E_STEPPERS > 3 #if HOTENDS > 3 || E_STEPPERS > 3
#error "RUMBA32 boards support up to 3 hotends / E-steppers." #error "RUMBA32 boards support up to 3 hotends / E steppers."
#endif #endif
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME

2
Marlin/src/pins/stm32f4/pins_VAKE403D.h
View file

@ -25,7 +25,7 @@
#include "env_validate.h" #include "env_validate.h"
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
#error "STM32F4 supports up to 2 hotends / E-steppers." #error "STM32F4 VAkE supports up to 2 hotends / E steppers."
#endif #endif
#define DEFAULT_MACHINE_NAME "STM32F446VET6" #define DEFAULT_MACHINE_NAME "STM32F446VET6"

2
Marlin/src/pins/stm32f7/pins_REMRAM_V1.h
View file

@ -33,7 +33,7 @@
#endif #endif
#if HAS_MULTI_HOTEND || E_STEPPERS > 1 #if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "RemRam only supports one hotend / E-stepper. Comment out this line to continue." #error "RemRam only supports 1 hotend / E stepper."
#endif #endif
// //

20
Marlin/src/pins/stm32g0/pins_BTT_SKR_MINI_E3_V3_0.h
View file

@ -170,7 +170,9 @@
* All pins are labeled as printed on DWIN PCB. Connect TX-TX, A-A and so on. * All pins are labeled as printed on DWIN PCB. Connect TX-TX, A-A and so on.
*/ */
#error "DWIN_CREALITY_LCD requires a custom cable, see diagram above this line. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! DWIN_CREALITY_LCD requires a custom cable, see diagram above this line. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
#define BEEPER_PIN EXP1_02_PIN #define BEEPER_PIN EXP1_02_PIN
#define BTN_EN1 EXP1_08_PIN #define BTN_EN1 EXP1_08_PIN
@ -193,7 +195,9 @@
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD! #elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
#define LCD_PINS_RS PB9 #define LCD_PINS_RS PB9
#define LCD_PINS_ENABLE EXP1_02_PIN #define LCD_PINS_ENABLE EXP1_02_PIN
@ -221,7 +225,9 @@
#if ENABLED(TFTGLCD_PANEL_SPI) #if ENABLED(TFTGLCD_PANEL_SPI)
#error "CAUTION! TFTGLCD_PANEL_SPI requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! TFTGLCD_PANEL_SPI requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/** /**
* TFTGLCD_PANEL_SPI display pinout * TFTGLCD_PANEL_SPI display pinout
@ -258,7 +264,9 @@
#elif ENABLED(FYSETC_MINI_12864_2_1) #elif ENABLED(FYSETC_MINI_12864_2_1)
#error "CAUTION! FYSETC_MINI_12864_2_1 and clones require wiring modifications. See 'pins_BTT_SKR_MINI_E3_V3_0.h' for details. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! FYSETC_MINI_12864_2_1 and clones require wiring modifications. See 'pins_BTT_SKR_MINI_E3_V3_0.h' for details. Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning"
#endif
/** /**
* *
@ -307,7 +315,9 @@
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) #if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. Comment out this line to continue." #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/** /**
* FYSETC TFT TFT81050 display pinout * FYSETC TFT TFT81050 display pinout