zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Merge pull request #6556 from thinkyhead/rc_use_controller_fan

Browse source 
Implement USE_CONTROLLER_FAN as a feature
This commit is contained in:
Scott Lahteine 2017-05-02 22:43:26 -05:00 committed by GitHub
parent f4239e62b1 2c13922c46
commit 902fe76db9
30 changed files with 335 additions and 174 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
Marlin/Conditionals_post.h
View file

@ -558,9 +558,9 @@
// Other fans // Other fans
#define HAS_FAN0 (PIN_EXISTS(FAN)) #define HAS_FAN0 (PIN_EXISTS(FAN))
#define HAS_FAN1 (PIN_EXISTS(FAN1) && CONTROLLERFAN_PIN != FAN1_PIN && E0_AUTO_FAN_PIN != FAN1_PIN && E1_AUTO_FAN_PIN != FAN1_PIN && E2_AUTO_FAN_PIN != FAN1_PIN && E3_AUTO_FAN_PIN != FAN1_PIN) #define HAS_FAN1 (PIN_EXISTS(FAN1) && CONTROLLER_FAN_PIN != FAN1_PIN && E0_AUTO_FAN_PIN != FAN1_PIN && E1_AUTO_FAN_PIN != FAN1_PIN && E2_AUTO_FAN_PIN != FAN1_PIN && E3_AUTO_FAN_PIN != FAN1_PIN)
#define HAS_FAN2 (PIN_EXISTS(FAN2) && CONTROLLERFAN_PIN != FAN2_PIN && E0_AUTO_FAN_PIN != FAN2_PIN && E1_AUTO_FAN_PIN != FAN2_PIN && E2_AUTO_FAN_PIN != FAN2_PIN && E3_AUTO_FAN_PIN != FAN2_PIN) #define HAS_FAN2 (PIN_EXISTS(FAN2) && CONTROLLER_FAN_PIN != FAN2_PIN && E0_AUTO_FAN_PIN != FAN2_PIN && E1_AUTO_FAN_PIN != FAN2_PIN && E2_AUTO_FAN_PIN != FAN2_PIN && E3_AUTO_FAN_PIN != FAN2_PIN)
#define HAS_CONTROLLERFAN (PIN_EXISTS(CONTROLLERFAN)) #define HAS_CONTROLLER_FAN (PIN_EXISTS(CONTROLLER_FAN))
// Servos // Servos
#define HAS_SERVOS (defined(NUM_SERVOS) && NUM_SERVOS > 0) #define HAS_SERVOS (defined(NUM_SERVOS) && NUM_SERVOS > 0)

19
Marlin/Configuration_adv.h
View file

@ -174,12 +174,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable) *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
//#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

14
Marlin/Marlin_main.cpp
View file

@ -11471,7 +11471,7 @@ void prepare_move_to_destination() {
#endif // BEZIER_CURVE_SUPPORT #endif // BEZIER_CURVE_SUPPORT
#if HAS_CONTROLLERFAN #if USE_CONTROLLER_FAN
void controllerFan() { void controllerFan() {
static millis_t lastMotorOn = 0, // Last time a motor was turned on static millis_t lastMotorOn = 0, // Last time a motor was turned on
@ -11504,12 +11504,12 @@ void prepare_move_to_destination() {
uint8_t speed = (!lastMotorOn || ELAPSED(ms, lastMotorOn + (CONTROLLERFAN_SECS) * 1000UL)) ? 0 : CONTROLLERFAN_SPEED; uint8_t speed = (!lastMotorOn || ELAPSED(ms, lastMotorOn + (CONTROLLERFAN_SECS) * 1000UL)) ? 0 : CONTROLLERFAN_SPEED;
// allows digital or PWM fan output to be used (see M42 handling) // allows digital or PWM fan output to be used (see M42 handling)
WRITE(CONTROLLERFAN_PIN, speed); WRITE(CONTROLLER_FAN_PIN, speed);
analogWrite(CONTROLLERFAN_PIN, speed); analogWrite(CONTROLLER_FAN_PIN, speed);
} }
} }
#endif // HAS_CONTROLLERFAN #endif // USE_CONTROLLER_FAN
#if ENABLED(MORGAN_SCARA) #if ENABLED(MORGAN_SCARA)
@ -11925,7 +11925,7 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
} }
#endif #endif
#if HAS_CONTROLLERFAN #if USE_CONTROLLER_FAN
controllerFan(); // Check if fan should be turned on to cool stepper drivers down controllerFan(); // Check if fan should be turned on to cool stepper drivers down
#endif #endif
@ -12195,8 +12195,8 @@ void setup() {
endstops.enable_z_probe(false); endstops.enable_z_probe(false);
#endif #endif
#if HAS_CONTROLLERFAN #if USE_CONTROLLER_FAN
SET_OUTPUT(CONTROLLERFAN_PIN); //Set pin used for driver cooling fan SET_OUTPUT(CONTROLLER_FAN_PIN); //Set pin used for driver cooling fan
#endif #endif
#if HAS_STEPPER_RESET #if HAS_STEPPER_RESET

26
Marlin/SanityCheck.h
View file

@ -174,6 +174,8 @@
#error "(min|max)_software_endstops are now (MIN|MAX)_SOFTWARE_ENDSTOPS. Please update your configuration." #error "(min|max)_software_endstops are now (MIN|MAX)_SOFTWARE_ENDSTOPS. Please update your configuration."
#elif ENABLED(Z_PROBE_SLED) && defined(SLED_PIN) #elif ENABLED(Z_PROBE_SLED) && defined(SLED_PIN)
#error "Replace SLED_PIN with SOL1_PIN (applies to both Z_PROBE_SLED and SOLENOID_PROBE)." #error "Replace SLED_PIN with SOL1_PIN (applies to both Z_PROBE_SLED and SOLENOID_PROBE)."
#elif defined(CONTROLLERFAN_PIN)
#error "CONTROLLERFAN_PIN is now CONTROLLER_FAN_PIN, enabled with USE_CONTROLLER_FAN. Please update your Configuration_adv.h."
#endif #endif
/** /**
@ -765,19 +767,21 @@ static_assert(1 >= 0
#endif #endif
#endif #endif
#if HAS_FAN0 && CONTROLLERFAN_PIN == FAN_PIN #if HAS_FAN0 && CONTROLLER_FAN_PIN == FAN_PIN
#error "You cannot set CONTROLLERFAN_PIN equal to FAN_PIN." #error "You cannot set CONTROLLER_FAN_PIN equal to FAN_PIN."
#endif #endif
#if HAS_CONTROLLERFAN #if USE_CONTROLLER_FAN
#if E0_AUTO_FAN_PIN == CONTROLLERFAN_PIN #if !HAS_CONTROLLER_FAN
#error "You cannot set E0_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." #error "USE_CONTROLLER_FAN requires a CONTROLLER_FAN_PIN. Define in Configuration_adv.h."
#elif E1_AUTO_FAN_PIN == CONTROLLERFAN_PIN #elif E0_AUTO_FAN_PIN == CONTROLLER_FAN_PIN
#error "You cannot set E1_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." #error "You cannot set E0_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN."
#elif E2_AUTO_FAN_PIN == CONTROLLERFAN_PIN #elif E1_AUTO_FAN_PIN == CONTROLLER_FAN_PIN
#error "You cannot set E2_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." #error "You cannot set E1_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN."
#elif E3_AUTO_FAN_PIN == CONTROLLERFAN_PIN #elif E2_AUTO_FAN_PIN == CONTROLLER_FAN_PIN
#error "You cannot set E3_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." #error "You cannot set E2_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN."
#elif E3_AUTO_FAN_PIN == CONTROLLER_FAN_PIN
#error "You cannot set E3_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN."
#endif #endif
#endif #endif

19
Marlin/example_configurations/Cartesio/Configuration_adv.h
View file

@ -174,12 +174,19 @@
#define TEMP_SENSOR_AD595_OFFSET 3.0 #define TEMP_SENSOR_AD595_OFFSET 3.0
#define TEMP_SENSOR_AD595_GAIN 2.0 #define TEMP_SENSOR_AD595_GAIN 2.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable) *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
//#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

19
Marlin/example_configurations/Felix/Configuration_adv.h
View file

@ -174,12 +174,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable) *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
//#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

19
Marlin/example_configurations/FolgerTech-i3-2020/Configuration_adv.h
View file

@ -174,12 +174,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable) *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
//#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

19
Marlin/example_configurations/Hephestos/Configuration_adv.h
View file

@ -174,12 +174,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable) *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
//#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

19
Marlin/example_configurations/Hephestos_2/Configuration_adv.h
View file

@ -174,12 +174,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable) *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
//#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

19
Marlin/example_configurations/K8200/Configuration_adv.h
View file

@ -187,12 +187,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable) *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
//#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

19
Marlin/example_configurations/K8400/Configuration_adv.h
View file

@ -174,12 +174,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN 2 //Pin used for the fan to cool controller (-1 to disable) *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
#define CONTROLLER_FAN_PIN 2 // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

19
Marlin/example_configurations/RigidBot/Configuration_adv.h
View file

@ -174,12 +174,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN 4 // RigidBot: Fans/Water Pump to cool the hotend cool side. *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
#define CONTROLLER_FAN_PIN 4 // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

19
Marlin/example_configurations/SCARA/Configuration_adv.h
View file

@ -174,12 +174,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable) *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
//#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

25
Marlin/example_configurations/TAZ4/Configuration_adv.h
View file

@ -174,20 +174,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
*
/********************************************************** * The fan will turn on automatically whenever any stepper is enabled
Fan Pins * and turn off after a set period after all steppers are turned off.
Fan_0 8 - Extruder 0 fan */
Fan_1 6 - Extruder 1 fan #define USE_CONTROLLER_FAN
Fan_2 2 - Case fan #if ENABLED(USE_CONTROLLER_FAN)
***********************************************************/ #define CONTROLLER_FAN_PIN 2 // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_PIN 2 //Pin used for the fan to cool controller (-1 to disable)
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run
#define CONTROLLERFAN_SPEED 130 // 255 == full speed #define CONTROLLERFAN_SPEED 130 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

19
Marlin/example_configurations/TinyBoy2/Configuration_adv.h
View file

@ -174,12 +174,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable) *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
//#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

19
Marlin/example_configurations/WITBOX/Configuration_adv.h
View file

@ -174,12 +174,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable) *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
//#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

19
Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
View file

@ -174,12 +174,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable) *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
//#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

19
Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
View file

@ -174,12 +174,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable) *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
//#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

19
Marlin/example_configurations/delta/generic/Configuration_adv.h
View file

@ -174,12 +174,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable) *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
//#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

19
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
View file

@ -174,12 +174,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable) *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
//#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

19
Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
View file

@ -179,12 +179,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable) *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
//#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

19
Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
View file

@ -174,12 +174,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable) *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
//#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

19
Marlin/example_configurations/gCreate_gMax1.5+/Configuration_adv.h
View file

@ -174,12 +174,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable) *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
//#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

19
Marlin/example_configurations/makibox/Configuration_adv.h
View file

@ -174,12 +174,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable) *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
//#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

19
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
View file

@ -174,12 +174,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN 23 //Pin used for the fan to cool controller (-1 to disable) *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
#define CONTROLLER_FAN_PIN 23 // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

19
Marlin/example_configurations/wt150/Configuration_adv.h
View file

@ -174,12 +174,19 @@
#define TEMP_SENSOR_AD595_OFFSET 0.0 #define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0 #define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers /**
//it will turn on when any driver is enabled * Controller Fan
//and turn off after the set amount of seconds from last driver being disabled again * To cool down the stepper drivers and MOSFETs.
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable) *
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run * The fan will turn on automatically whenever any stepper is enabled
#define CONTROLLERFAN_SPEED 255 // == full speed * and turn off after a set period after all steppers are turned off.
*/
//#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#endif
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably

6
Marlin/pins.h
View file

@ -219,8 +219,8 @@
#ifndef FAN2_PIN #ifndef FAN2_PIN
#define FAN2_PIN -1 #define FAN2_PIN -1
#endif #endif
#ifndef CONTROLLERFAN_PIN #ifndef CONTROLLER_FAN_PIN
#define CONTROLLERFAN_PIN -1 #define CONTROLLER_FAN_PIN -1
#endif #endif
#ifndef HEATER_0_PIN #ifndef HEATER_0_PIN
@ -507,7 +507,7 @@
X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, \ X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, \
Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, \ Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, \
Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, Z_MIN_PROBE_PIN, \ Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, Z_MIN_PROBE_PIN, \
PS_ON_PIN, HEATER_BED_PIN, FAN_PIN, FAN1_PIN, FAN2_PIN, CONTROLLERFAN_PIN, \ PS_ON_PIN, HEATER_BED_PIN, FAN_PIN, FAN1_PIN, FAN2_PIN, CONTROLLER_FAN_PIN, \
_E0_PINS _E1_PINS _E2_PINS _E3_PINS _E4_PINS BED_PINS \ _E0_PINS _E1_PINS _E2_PINS _E3_PINS _E4_PINS BED_PINS \
_H0_PINS _H1_PINS _H2_PINS _H3_PINS _H4_PINS \ _H0_PINS _H1_PINS _H2_PINS _H3_PINS _H4_PINS \
_X2_PINS _Y2_PINS _Z2_PINS \ _X2_PINS _Y2_PINS _Z2_PINS \

4
Marlin/pinsDebug_list.h
View file

@ -95,8 +95,8 @@
#if PIN_EXISTS(CASE_LIGHT) #if PIN_EXISTS(CASE_LIGHT)
REPORT_NAME_DIGITAL(CASE_LIGHT_PIN, __LINE__ ) REPORT_NAME_DIGITAL(CASE_LIGHT_PIN, __LINE__ )
#endif #endif
#if PIN_EXISTS(CONTROLLERFAN) #if PIN_EXISTS(CONTROLLER_FAN)
REPORT_NAME_DIGITAL(CONTROLLERFAN_PIN, __LINE__ ) REPORT_NAME_DIGITAL(CONTROLLER_FAN_PIN, __LINE__ )
#endif #endif
#if PIN_EXISTS(CUTOFF_RESET) #if PIN_EXISTS(CUTOFF_RESET)
REPORT_NAME_DIGITAL(CUTOFF_RESET_PIN, __LINE__ ) REPORT_NAME_DIGITAL(CUTOFF_RESET_PIN, __LINE__ )

4
Marlin/pins_AZTEEG_X3_PRO.h
View file

@ -107,7 +107,9 @@
#undef FAN_PIN #undef FAN_PIN
#define FAN_PIN 6 // Part Cooling System #define FAN_PIN 6 // Part Cooling System
#define CONTROLLERFAN_PIN 4 // Pin used for the fan to cool motherboard (-1 to disable) #ifndef CONTROLLER_FAN_PIN
#define CONTROLLER_FAN_PIN 4 // Pin used for the fan to cool motherboard (-1 to disable)
#endif
// Fans/Water Pump to cool the hotend cool side. // Fans/Water Pump to cool the hotend cool side.
#define ORIG_E0_AUTO_FAN_PIN 5 #define ORIG_E0_AUTO_FAN_PIN 5

4
Marlin/pins_MEGACONTROLLER.h
View file

@ -116,7 +116,9 @@
#define FAN1_PIN 35 #define FAN1_PIN 35
#define FAN2_PIN 36 #define FAN2_PIN 36
#define CONTROLLERFAN_PIN FAN2_PIN #ifndef CONTROLLER_FAN_PIN
#define CONTROLLER_FAN_PIN FAN2_PIN
#endif
#define FAN_SOFT_PWM #define FAN_SOFT_PWM