zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Add option to enable/disable autoretract altogether (#11904)

Browse source
This commit is contained in:
Victor Tseng 2018-09-29 05:52:56 +08:00 committed by Scott Lahteine
parent ad21a4f07b
commit 93839e2f73
63 changed files with 392 additions and 197 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

9
Marlin/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/default/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Anet/A2/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Anet/A6/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Anet/A8/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -1001,10 +1001,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Cartesio/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Einstart-S/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Felix/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

11
Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
View file

@ -995,10 +995,17 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
<<<<<<< HEAD:Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
#define FWRETRACT // ONLY PARTIALLY TESTED #define FWRETRACT // ONLY PARTIALLY TESTED
=======
//#define FWRETRACT
>>>>>>> patch:Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
View file

@ -997,10 +997,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
View file

@ -998,10 +998,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/MakerParts/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
View file

@ -1001,10 +1001,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/RigidBot/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/SCARA/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 35 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 35 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/TheBorg/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
View file

@ -1006,10 +1006,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
View file

@ -995,10 +995,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
View file

@ -995,10 +995,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
View file

@ -995,10 +995,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
View file

@ -995,10 +995,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
View file

@ -995,10 +995,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/delta/generic/Configuration_adv.h
View file

@ -995,10 +995,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
View file

@ -995,10 +995,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
View file

@ -995,10 +995,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/makibox/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
View file

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

9
Marlin/src/config/examples/wt150/Configuration_adv.h
View file

@ -994,10 +994,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

6
Marlin/src/feature/fwretract.h
View file

@ -58,8 +58,10 @@ public:
} }
static void enable_autoretract(const bool enable) { static void enable_autoretract(const bool enable) {
autoretract_enabled = enable; #if ENABLED(FWRETRACT_AUTORETRACT)
refresh_autoretract(); autoretract_enabled = enable;
refresh_autoretract();
#endif
} }
static void retract(const bool retracting static void retract(const bool retracting

21
Marlin/src/gcode/feature/fwretract/M207-M209.cpp
View file

@ -57,17 +57,18 @@ void GcodeSuite::M208() {
if (parser.seen('W')) fwretract.swap_retract_recover_length = parser.value_axis_units(E_AXIS); if (parser.seen('W')) fwretract.swap_retract_recover_length = parser.value_axis_units(E_AXIS);
} }
/** #if ENABLED(FWRETRACT_AUTORETRACT)
* M209: Enable automatic retract (M209 S1)
* For slicers that don't support G10/11, reversed extrude-only /**
* moves will be classified as retraction. * M209: Enable automatic retract (M209 S1)
*/ * For slicers that don't support G10/11, reversed extrude-only
void GcodeSuite::M209() { * moves will be classified as retraction.
if (MIN_AUTORETRACT <= MAX_AUTORETRACT) { */
if (parser.seen('S')) { void GcodeSuite::M209() {
if (MIN_AUTORETRACT <= MAX_AUTORETRACT && parser.seen('S'))
fwretract.enable_autoretract(parser.value_bool()); fwretract.enable_autoretract(parser.value_bool());
}
} }
}
#endif // FWRETRACT_AUTORETRACT
#endif // FWRETRACT #endif // FWRETRACT

8
Marlin/src/gcode/gcode.cpp
View file

@ -474,9 +474,11 @@ void GcodeSuite::process_parsed_command(
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
case 207: M207(); break; // M207: Set Retract Length, Feedrate, and Z lift case 207: M207(); break; // M207: Set Retract Length, Feedrate, and Z lift
case 208: M208(); break; // M208: Set Recover (unretract) Additional Length and Feedrate case 208: M208(); break; // M208: Set Recover (unretract) Additional Length and Feedrate
case 209: #if ENABLED(FWRETRACT_AUTORETRACT)
if (MIN_AUTORETRACT <= MAX_AUTORETRACT) M209(); // M209: Turn Automatic Retract Detection on/off case 209:
break; if (MIN_AUTORETRACT <= MAX_AUTORETRACT) M209(); // M209: Turn Automatic Retract Detection on/off
break;
#endif
#endif #endif
case 211: M211(); break; // M211: Enable, Disable, and/or Report software endstops case 211: M211(); break; // M211: Enable, Disable, and/or Report software endstops

6
Marlin/src/gcode/gcode.h
View file

@ -161,7 +161,7 @@
* M206 - Set additional homing offset. (Disabled by NO_WORKSPACE_OFFSETS or DELTA) * M206 - Set additional homing offset. (Disabled by NO_WORKSPACE_OFFSETS or DELTA)
* M207 - Set Retract Length: S<length>, Feedrate: F<units/min>, and Z lift: Z<distance>. (Requires FWRETRACT) * M207 - Set Retract Length: S<length>, Feedrate: F<units/min>, and Z lift: Z<distance>. (Requires FWRETRACT)
* M208 - Set Recover (unretract) Additional (!) Length: S<length> and Feedrate: F<units/min>. (Requires FWRETRACT) * M208 - Set Recover (unretract) Additional (!) Length: S<length> and Feedrate: F<units/min>. (Requires FWRETRACT)
* M209 - Turn Automatic Retract Detection on/off: S<0|1> (For slicers that don't support G10/11). (Requires FWRETRACT) * M209 - Turn Automatic Retract Detection on/off: S<0|1> (For slicers that don't support G10/11). (Requires FWRETRACT_AUTORETRACT)
Every normal extrude-only move will be classified as retract depending on the direction. Every normal extrude-only move will be classified as retract depending on the direction.
* M211 - Enable, Disable, and/or Report software endstops: S<0|1> (Requires MIN_SOFTWARE_ENDSTOPS or MAX_SOFTWARE_ENDSTOPS) * M211 - Enable, Disable, and/or Report software endstops: S<0|1> (Requires MIN_SOFTWARE_ENDSTOPS or MAX_SOFTWARE_ENDSTOPS)
* M218 - Set/get a tool offset: "M218 T<index> X<offset> Y<offset>". (Requires 2 or more extruders) * M218 - Set/get a tool offset: "M218 T<index> X<offset> Y<offset>". (Requires 2 or more extruders)
@ -605,7 +605,9 @@ private:
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
static void M207(); static void M207();
static void M208(); static void M208();
static void M209(); #if ENABLED(FWRETRACT_AUTORETRACT)
static void M209();
#endif
#endif #endif
static void M211(); static void M211();

4
Marlin/src/gcode/motion/G0_G1.cpp
View file

@ -25,7 +25,7 @@
#include "../../Marlin.h" #include "../../Marlin.h"
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT) && ENABLED(FWRETRACT_AUTORETRACT)
#include "../../feature/fwretract.h" #include "../../feature/fwretract.h"
#endif #endif
@ -54,7 +54,7 @@ void GcodeSuite::G0_G1(
if (IsRunning() && G0_G1_CONDITION) { if (IsRunning() && G0_G1_CONDITION) {
get_destination_from_command(); // For X Y Z E F get_destination_from_command(); // For X Y Z E F
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT) && ENABLED(FWRETRACT_AUTORETRACT)
if (MIN_AUTORETRACT <= MAX_AUTORETRACT) { if (MIN_AUTORETRACT <= MAX_AUTORETRACT) {
// When M209 Autoretract is enabled, convert E-only moves to firmware retract/recover moves // When M209 Autoretract is enabled, convert E-only moves to firmware retract/recover moves

4
Marlin/src/lcd/ultralcd.cpp
View file

@ -4147,7 +4147,9 @@ void lcd_quick_feedback(const bool clear_buttons) {
void lcd_config_retract_menu() { void lcd_config_retract_menu() {
START_MENU(); START_MENU();
MENU_BACK(MSG_CONTROL); MENU_BACK(MSG_CONTROL);
MENU_ITEM_EDIT_CALLBACK(bool, MSG_AUTORETRACT, &fwretract.autoretract_enabled, fwretract.refresh_autoretract); #if ENABLED(FWRETRACT_AUTORETRACT)
MENU_ITEM_EDIT_CALLBACK(bool, MSG_AUTORETRACT, &fwretract.autoretract_enabled, fwretract.refresh_autoretract);
#endif
MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT, &fwretract.retract_length, 0, 100); MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT, &fwretract.retract_length, 0, 100);
#if EXTRUDERS > 1 #if EXTRUDERS > 1
MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_SWAP, &fwretract.swap_retract_length, 0, 100); MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_SWAP, &fwretract.swap_retract_length, 0, 100);

34
Marlin/src/module/configuration_store.cpp
View file

@ -672,13 +672,19 @@ void MarlinSettings::postprocess() {
#endif #endif
EEPROM_WRITE(lcd_contrast); EEPROM_WRITE(lcd_contrast);
const bool autoretract_enabled =
#if DISABLED(FWRETRACT_AUTORETRACT)
false
#else
fwretract.autoretract_enabled
#endif
;
EEPROM_WRITE(autoretract_enabled);
#if DISABLED(FWRETRACT) #if DISABLED(FWRETRACT)
const bool autoretract_enabled = false;
const float autoretract_defaults[] = { 3, 45, 0, 0, 0, 13, 0, 8 }; const float autoretract_defaults[] = { 3, 45, 0, 0, 0, 13, 0, 8 };
EEPROM_WRITE(autoretract_enabled);
EEPROM_WRITE(autoretract_defaults); EEPROM_WRITE(autoretract_defaults);
#else #else
EEPROM_WRITE(fwretract.autoretract_enabled);
EEPROM_WRITE(fwretract.retract_length); EEPROM_WRITE(fwretract.retract_length);
EEPROM_WRITE(fwretract.retract_feedrate_mm_s); EEPROM_WRITE(fwretract.retract_feedrate_mm_s);
EEPROM_WRITE(fwretract.retract_zlift); EEPROM_WRITE(fwretract.retract_zlift);
@ -1070,7 +1076,7 @@ void MarlinSettings::postprocess() {
} }
else { else {
float dummy = 0; float dummy = 0;
#if DISABLED(AUTO_BED_LEVELING_UBL) || DISABLED(FWRETRACT) || ENABLED(NO_VOLUMETRICS) #if DISABLED(AUTO_BED_LEVELING_UBL) || DISABLED(FWRETRACT) || DISABLED(FWRETRACT_AUTORETRACT) || ENABLED(NO_VOLUMETRICS)
bool dummyb; bool dummyb;
#endif #endif
@ -1374,7 +1380,11 @@ void MarlinSettings::postprocess() {
// //
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
EEPROM_READ(fwretract.autoretract_enabled); #if DISABLED(FWRETRACT_AUTORETRACT)
EEPROM_READ(dummyb);
#else
EEPROM_READ(fwretract.autoretract_enabled);
#endif
EEPROM_READ(fwretract.retract_length); EEPROM_READ(fwretract.retract_length);
EEPROM_READ(fwretract.retract_feedrate_mm_s); EEPROM_READ(fwretract.retract_feedrate_mm_s);
EEPROM_READ(fwretract.retract_zlift); EEPROM_READ(fwretract.retract_zlift);
@ -2620,12 +2630,16 @@ void MarlinSettings::reset(PORTARG_SOLO) {
SERIAL_ECHOPAIR_P(port, " W", LINEAR_UNIT(fwretract.swap_retract_recover_length)); SERIAL_ECHOPAIR_P(port, " W", LINEAR_UNIT(fwretract.swap_retract_recover_length));
SERIAL_ECHOLNPAIR_P(port, " F", MMS_TO_MMM(LINEAR_UNIT(fwretract.retract_recover_feedrate_mm_s))); SERIAL_ECHOLNPAIR_P(port, " F", MMS_TO_MMM(LINEAR_UNIT(fwretract.retract_recover_feedrate_mm_s)));
if (!forReplay) { #if ENABLED(FWRETRACT_AUTORETRACT)
if (!forReplay) {
CONFIG_ECHO_START;
SERIAL_ECHOLNPGM_P(port, "Auto-Retract: S=0 to disable, 1 to interpret E-only moves as retract/recover");
}
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM_P(port, "Auto-Retract: S=0 to disable, 1 to interpret E-only moves as retract/recover"); SERIAL_ECHOLNPAIR_P(port, " M209 S", fwretract.autoretract_enabled ? 1 : 0);
}
CONFIG_ECHO_START; #endif // FWRETRACT_AUTORETRACT
SERIAL_ECHOLNPAIR_P(port, " M209 S", fwretract.autoretract_enabled ? 1 : 0);
#endif // FWRETRACT #endif // FWRETRACT