zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Merge pull request #7220 from thinkyhead/bf_fix_eeprom_opts

Browse source 
Make all EEPROM optimization options available
This commit is contained in:
Scott Lahteine 2017-07-03 01:39:01 -05:00 committed by GitHub
parent 015839fc50 69297b2d7b
commit 94c965fad6
32 changed files with 158 additions and 219 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

12
Marlin/Configuration.h
View file

@ -964,6 +964,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -988,13 +989,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/Anet/A6/Configuration.h
View file

@ -1111,6 +1111,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
#define Z_SAFE_HOMING #define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1144,13 +1145,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/Anet/A8/Configuration.h
View file

@ -970,6 +970,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -994,13 +995,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/CL-260/Configuration.h
View file

@ -961,6 +961,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -985,13 +986,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/Cartesio/Configuration.h
View file

@ -958,6 +958,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -982,13 +983,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/Felix/Configuration.h
View file

@ -942,6 +942,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -966,13 +967,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/Felix/DUAL/Configuration.h
View file

@ -942,6 +942,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -966,13 +967,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h
View file

@ -964,6 +964,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
#define Z_SAFE_HOMING #define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -988,13 +989,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/Hephestos/Configuration.h
View file

@ -950,6 +950,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -974,13 +975,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/Hephestos_2/Configuration.h
View file

@ -953,6 +953,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
#define Z_SAFE_HOMING #define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -977,13 +978,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

5
Marlin/example_configurations/Infitary-i3-M508/Configuration.h
View file

@ -944,6 +944,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -968,8 +969,8 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
// To disable EEPROM Serial responses and decrease program space by ~1700 byte: comment this out: // To disable EEPROM Serial responses and decrease program space by ~1700 byte: comment this out:

12
Marlin/example_configurations/K8200/Configuration.h
View file

@ -989,6 +989,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1013,13 +1014,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS // K8200: uses EEPROM by default #define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/K8400/Configuration.h
View file

@ -960,6 +960,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -984,13 +985,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/K8400/Dual-head/Configuration.h
View file

@ -960,6 +960,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -984,13 +985,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/M150/Configuration.h
View file

@ -987,6 +987,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1011,13 +1012,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
View file

@ -960,6 +960,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -984,13 +985,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/RigidBot/Configuration.h
View file

@ -958,6 +958,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -982,13 +983,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/SCARA/Configuration.h
View file

@ -972,6 +972,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -996,13 +997,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/TAZ4/Configuration.h
View file

@ -979,6 +979,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1003,13 +1004,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/TinyBoy2/Configuration.h
View file

@ -1016,6 +1016,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1040,13 +1041,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/WITBOX/Configuration.h
View file

@ -950,6 +950,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -974,13 +975,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/adafruit/ST7565/Configuration.h
View file

@ -960,6 +960,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -984,13 +985,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
View file

@ -1081,6 +1081,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1104,13 +1105,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
View file

@ -1083,6 +1083,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1106,13 +1107,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/delta/generic/Configuration.h
View file

@ -1072,6 +1072,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1095,13 +1096,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/delta/kossel_mini/Configuration.h
View file

@ -1075,6 +1075,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1098,13 +1099,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/delta/kossel_pro/Configuration.h
View file

@ -1080,6 +1080,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
#define Z_SAFE_HOMING #define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1103,13 +1104,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/delta/kossel_xl/Configuration.h
View file

@ -1138,6 +1138,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1161,13 +1162,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h
View file

@ -976,6 +976,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
#define Z_SAFE_HOMING #define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -1000,13 +1001,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/makibox/Configuration.h
View file

@ -963,6 +963,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -987,13 +988,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/tvrrug/Round2/Configuration.h
View file

@ -955,6 +955,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -979,13 +980,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive

12
Marlin/example_configurations/wt150/Configuration.h
View file

@ -966,6 +966,7 @@
// - If stepper drivers time out, it will need X and Y homing again before Z homing. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
//
//#define Z_SAFE_HOMING //#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
@ -990,13 +991,10 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// Define this to enable EEPROM support //
#define EEPROM_SETTINGS #define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#if ENABLED(EEPROM_SETTINGS) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Print a report on M500. Please keep turned on.
#endif
// //
// Host Keepalive // Host Keepalive