Extend pins errors to include the processor

2018-11-08 21:57:15 -06:00 · 2018-11-08 21:57:15 -06:00 · 9c8f083d6c
parent 525ea554a1
commit 9c8f083d6c
88 changed files with 113 additions and 113 deletions
--- a/Marlin/src/pins/pins_5DPRINT.h
+++ b/Marlin/src/pins/pins_5DPRINT.h
@ -31,7 +31,7 @@
 *  and with the mainstream Marlin software.
 *
 *  Teensyduino - http://www.pjrc.com/teensy/teensyduino.html
- *    Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu
+ *    Select Teensy++ 2.0 in Arduino IDE from the 'Tools > Board' menu
 *
 *    Installation instructions are at the above URL.  Don't bother loading the
 *    libraries - they are not used with the Marlin software.
@ -46,7 +46,7 @@
 *          hardware directory in Arduino.  The Arduino hardware directory will probably
 *          be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
 *       3. Restart Arduino.
- *       4. Select "Printrboard" from the 'Tools -> Boards' menu.
+ *       4. Select "Printrboard" from the 'Tools > Board' menu.
 *
 *  Teensyduino is the most popular option. Printrboard is used if your board doesn't have
 *  the Teensyduino bootloader on it.
@ -68,7 +68,7 @@
 */

 #ifndef __AVR_AT90USB1286__
-  #error "Oops!  Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'"
 #endif

 #define DEFAULT_MACHINE_NAME "Makibox"
--- a/Marlin/src/pins/pins_ALLIGATOR_R2.h
+++ b/Marlin/src/pins/pins_ALLIGATOR_R2.h
@ -26,7 +26,7 @@
 */

 #ifndef __SAM3X8E__
-  #error "Oops!  Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME            "Alligator Board R2"
--- a/Marlin/src/pins/pins_ANET_10.h
+++ b/Marlin/src/pins/pins_ANET_10.h
@ -89,7 +89,7 @@
 */

 #ifndef __AVR_ATmega1284P__
-  #error "Oops!  Make sure you have 'Anet V1.0', 'Anet V1.0 (Optiboot)' or 'Sanguino' selected in the 'Tools -> Boards' menu and ATmega1284P selected in 'Tools -> Processor' menu."
+  #error "Oops! Select 'Anet V1.0', 'Anet V1.0 (Optiboot)' or 'Sanguino' in 'Tools > Board' and 'ATmega1284P' in 'Tools > Processor.'"
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_ARCHIM2.h
+++ b/Marlin/src/pins/pins_ARCHIM2.h
@ -36,7 +36,7 @@
 */

 #ifndef __SAM3X8E__
-  #error "Oops!  Make sure you have 'Archim' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Archim' in 'Tools > Board.'"
 #endif

 //
--- a/Marlin/src/pins/pins_ARMED.h
+++ b/Marlin/src/pins/pins_ARMED.h
@ -21,7 +21,7 @@
 */

 #ifndef STM32F4
-  #error "Oops!  Make sure you have an STM32F4 board selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select an STM32F4 board in 'Tools > Board.'"
 #endif

 #ifndef ARMED_V1_0
--- a/Marlin/src/pins/pins_AZSMZ_MINI.h
+++ b/Marlin/src/pins/pins_AZSMZ_MINI.h
@ -25,7 +25,7 @@
 */

 #ifndef TARGET_LPC1768
-  #error "Oops!  Make sure you have the LPC1768 environment selected in your IDE."
+  #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_AZTEEG_X3.h
+++ b/Marlin/src/pins/pins_AZTEEG_X3.h
@ -25,7 +25,7 @@
 */

 #ifndef __AVR_ATmega2560__
-  #error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #if HOTENDS > 2 || E_STEPPERS > 2
--- a/Marlin/src/pins/pins_AZTEEG_X3_PRO.h
+++ b/Marlin/src/pins/pins_AZTEEG_X3_PRO.h
@ -25,7 +25,7 @@
 */

 #ifndef __AVR_ATmega2560__
-  #error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #if HOTENDS > 5 || E_STEPPERS > 5
--- a/Marlin/src/pins/pins_AZTEEG_X5_GT.h
+++ b/Marlin/src/pins/pins_AZTEEG_X5_GT.h
@ -26,7 +26,7 @@
 */

 #ifndef TARGET_LPC1768
-  #error "Oops!  Make sure you have the LPC1768 environment selected in your IDE."
+  #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_AZTEEG_X5_MINI_WIFI.h
+++ b/Marlin/src/pins/pins_AZTEEG_X5_MINI_WIFI.h
@ -26,7 +26,7 @@
 */

 #ifndef TARGET_LPC1768
-  #error "Oops!  Make sure you have the LPC1768 environment selected in your IDE."
+  #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_BEAST.h
+++ b/Marlin/src/pins/pins_BEAST.h
@ -21,7 +21,7 @@
 */

 #if !defined(__STM32F1__) && !defined(__STM32F4__)
-  #error "Oops!  Make sure you have an STM32F1/4 board selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select an STM32F1/4 board in 'Tools > Board.'"
 #endif

 /**
--- a/Marlin/src/pins/pins_BIQU_BQ111_A4.h
+++ b/Marlin/src/pins/pins_BIQU_BQ111_A4.h
@ -31,7 +31,7 @@
 */

 #ifndef TARGET_LPC1768
-  #error "Oops!  Make sure you have the LPC1768 environment selected in your IDE."
+  #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_BQ_ZUM_MEGA_3D.h
+++ b/Marlin/src/pins/pins_BQ_ZUM_MEGA_3D.h
@ -25,7 +25,7 @@
 */

 #ifndef __AVR_ATmega2560__
-  #error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME "ZUM Mega 3D"
--- a/Marlin/src/pins/pins_BRAINWAVE.h
+++ b/Marlin/src/pins/pins_BRAINWAVE.h
@ -53,9 +53,9 @@
 *
 *    1. In the Arduino IDE, under Files -> Preferences paste the following URL
 *       https://rawgit.com/Bob-the-Kuhn/Marlin_AT90USB/master/package_MARLIN_AT90USB_index.json
- *    2. Under Tools -> Board -> Boards manager, scroll to the bottom, click on MARLIN_AT90USB
+ *    2. Under Tools > Board -> Boards manager, scroll to the bottom, click on MARLIN_AT90USB
 *       and then click on "Install"
- *    3. Select "AT90USB646_TEENSYPP" from the 'Tools -> Boards' menu.
+ *    3. Select "AT90USB646_TEENSYPP" from the 'Tools > Board' menu.
 */

 /**
@ -68,7 +68,7 @@
 */

 #ifndef __AVR_AT90USB646__
-  #error "Oops!  Make sure you have 'AT90USB646_TEENSYPP' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'AT90USB646_TEENSYPP' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME         "Brainwave"
--- a/Marlin/src/pins/pins_BRAINWAVE_PRO.h
+++ b/Marlin/src/pins/pins_BRAINWAVE_PRO.h
@ -44,7 +44,7 @@
 *  and with the mainstream Marlin software.
 *
 *  Teensyduino - http://www.pjrc.com/teensy/teensyduino.html
- *    Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu
+ *    Select Teensy++ 2.0 in Arduino IDE from the 'Tools > Board' menu
 *
 *    Installation instructions are at the above URL.  Don't bother loading the
 *    libraries - they are not used with the Marlin software.
@ -59,7 +59,7 @@
 *          hardware directory in Arduino.  The Arduino hardware directory will probably
 *          be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
 *       3. Restart Arduino.
- *       4. Select "Printrboard" from the 'Tools -> Boards' menu.
+ *       4. Select "Printrboard" from the 'Tools > Board' menu.
 *
 *  Teensyduino is the most popular option. Printrboard is used if your board doesn't have
 *  the Teensyduino bootloader on it.
@ -75,7 +75,7 @@
 */

 #ifndef __AVR_AT90USB1286__
-  #error "Oops!  Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME         "Brainwave Pro"
--- a/Marlin/src/pins/pins_CHEAPTRONIC.h
+++ b/Marlin/src/pins/pins_CHEAPTRONIC.h
@ -25,7 +25,7 @@
 */

 #ifndef __AVR_ATmega2560__
-  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME         "Cheaptronic v1.0"
--- a/Marlin/src/pins/pins_CHEAPTRONICv2.h
+++ b/Marlin/src/pins/pins_CHEAPTRONICv2.h
@ -27,7 +27,7 @@
 */

 #ifndef __AVR_ATmega2560__
-  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME         "Cheaptronic v2.0"
--- a/Marlin/src/pins/pins_CHITU3D.h
+++ b/Marlin/src/pins/pins_CHITU3D.h
@ -21,7 +21,7 @@
 */

 #if !defined(__STM32F1__) && !defined(__STM32F4__)
-  #error "Oops!  Make sure you have an STM32F1/4 board selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select an STM32F1/4 board in 'Tools > Board.'"
 #endif

 /**
--- a/Marlin/src/pins/pins_CNCONTROLS_11.h
+++ b/Marlin/src/pins/pins_CNCONTROLS_11.h
@ -3,7 +3,7 @@
 */

 #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
-  #error Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME "CN Controls V11"
--- a/Marlin/src/pins/pins_CNCONTROLS_12.h
+++ b/Marlin/src/pins/pins_CNCONTROLS_12.h
@ -3,7 +3,7 @@
 */

 #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
-  #error Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME            "CN Controls V12"
--- a/Marlin/src/pins/pins_COHESION3D_MINI.h
+++ b/Marlin/src/pins/pins_COHESION3D_MINI.h
@ -26,7 +26,7 @@
 */

 #ifndef TARGET_LPC1768
-  #error "Oops!  Make sure you have the LPC1768 environment selected in your IDE."
+  #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_COHESION3D_REMIX.h
+++ b/Marlin/src/pins/pins_COHESION3D_REMIX.h
@ -26,7 +26,7 @@
 */

 #ifndef TARGET_LPC1768
-  #error "Oops!  Make sure you have the LPC1768 environment selected in your IDE."
+  #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_DUE3DOM.h
+++ b/Marlin/src/pins/pins_DUE3DOM.h
@ -25,7 +25,7 @@
 */

 #ifndef __SAM3X8E__
-  #error "Oops!  Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME "DUE3DOM"
--- a/Marlin/src/pins/pins_DUE3DOM_MINI.h
+++ b/Marlin/src/pins/pins_DUE3DOM_MINI.h
@ -25,7 +25,7 @@
 */

 #ifndef __SAM3X8E__
-  #error "Oops!  Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME "DUE3DOM MINI"
--- a/Marlin/src/pins/pins_EINSTART-S.h
+++ b/Marlin/src/pins/pins_EINSTART-S.h
@ -26,14 +26,14 @@
 */

 #if ENABLED(TARGET_LPC1768)
-  #error "Oops!  Set MOTHERBOARD to an LPC1768-based board when building for LPC1768."
+  #error "Oops! Set MOTHERBOARD to an LPC1768-based board when building for LPC1768."
 #elif defined(__STM32F1__)
-  #error "Oops!  Set MOTHERBOARD to an STM32F1-based board when building for STM32F1."
+  #error "Oops! Set MOTHERBOARD to an STM32F1-based board when building for STM32F1."
 #endif

 #if DISABLED(IS_RAMPS_SMART) && DISABLED(IS_RAMPS_DUO) && DISABLED(IS_RAMPS4DUE) && DISABLED(TARGET_LPC1768)
  #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
-    #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+    #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
  #endif
 #endif

--- a/Marlin/src/pins/pins_EINSY_RAMBO.h
+++ b/Marlin/src/pins/pins_EINSY_RAMBO.h
@ -25,7 +25,7 @@
 */

 #ifndef __AVR_ATmega2560__
-  #error "Oops!  Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino Mega 2560 or Rambo' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME         "Einsy Rambo"
--- a/Marlin/src/pins/pins_EINSY_RETRO.h
+++ b/Marlin/src/pins/pins_EINSY_RETRO.h
@ -25,7 +25,7 @@
 */

 #ifndef __AVR_ATmega2560__
-  #error "Oops!  Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino Mega 2560 or Rambo' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME         "Einsy Retro"
--- a/Marlin/src/pins/pins_ELEFU_3.h
+++ b/Marlin/src/pins/pins_ELEFU_3.h
@ -25,7 +25,7 @@
 */

 #ifndef __AVR_ATmega2560__
-  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME "Elefu Ra v3"
--- a/Marlin/src/pins/pins_FORMBOT_RAPTOR.h
+++ b/Marlin/src/pins/pins_FORMBOT_RAPTOR.h
@ -25,7 +25,7 @@
 */

 #ifndef __AVR_ATmega2560__
-  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #if HOTENDS > 3 || E_STEPPERS > 3
--- a/Marlin/src/pins/pins_FORMBOT_TREX2PLUS.h
+++ b/Marlin/src/pins/pins_FORMBOT_TREX2PLUS.h
@ -25,7 +25,7 @@
 */

 #ifndef __AVR_ATmega2560__
-  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #if HOTENDS > 2 || E_STEPPERS > 2
--- a/Marlin/src/pins/pins_FORMBOT_TREX3.h
+++ b/Marlin/src/pins/pins_FORMBOT_TREX3.h
@ -25,7 +25,7 @@
 */

 #ifndef __AVR_ATmega2560__
-  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #if HOTENDS > 2 || E_STEPPERS > 2
--- a/Marlin/src/pins/pins_FYSETC_F6_13.h
+++ b/Marlin/src/pins/pins_FYSETC_F6_13.h
@ -25,7 +25,7 @@
 //

 #ifndef __AVR_ATmega2560__
-  #error "Oops!  Make sure you have 'FYSETC_F6' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'FYSETC_F6' in 'Tools > Board.'"
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_GEN3_MONOLITHIC.h
+++ b/Marlin/src/pins/pins_GEN3_MONOLITHIC.h
@ -50,7 +50,7 @@
 */

 #ifndef __AVR_ATmega644P__
-  #error "Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Sanguino' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME "Gen3 Monolithic"
--- a/Marlin/src/pins/pins_GEN3_PLUS.h
+++ b/Marlin/src/pins/pins_GEN3_PLUS.h
@ -51,7 +51,7 @@


 #if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__)
-  #error "Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644P' or 'ATmega1284P' in 'Tools > Processor.'"
 #endif

 #define BOARD_NAME         "Gen3+"
--- a/Marlin/src/pins/pins_GEN6.h
+++ b/Marlin/src/pins/pins_GEN6.h
@ -52,7 +52,7 @@
 */

 #if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__)
-  #error "Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644P' or 'ATmega1284P' in 'Tools > Processor.'"
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_GEN7_12.h
+++ b/Marlin/src/pins/pins_GEN7_12.h
@ -52,7 +52,7 @@
 */

 #if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
-  #error "Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644', 'ATmega644P', or 'ATmega1284P' in 'Tools > Processor.'"
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_GEN7_14.h
+++ b/Marlin/src/pins/pins_GEN7_14.h
@ -52,7 +52,7 @@
 */

 #if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
-  #error "Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644', 'ATmega644P', or 'ATmega1284P' in 'Tools > Processor.'"
 #endif

 #define BOARD_NAME "Gen7 v1.4"
--- a/Marlin/src/pins/pins_GEN7_CUSTOM.h
+++ b/Marlin/src/pins/pins_GEN7_CUSTOM.h
@ -55,7 +55,7 @@
 */

 #if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
-  #error "Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644', 'ATmega644P', or 'ATmega1284P' in 'Tools > Processor.'"
 #endif

 #define BOARD_NAME      "Gen7 Custom"
--- a/Marlin/src/pins/pins_GT2560_REV_A.h
+++ b/Marlin/src/pins/pins_GT2560_REV_A.h
@ -27,7 +27,7 @@
 */

 #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
-  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_GT2560_V3.h
+++ b/Marlin/src/pins/pins_GT2560_V3.h
@ -26,7 +26,7 @@
 */

 #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
-  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_GTM32_PRO_VB.h
+++ b/Marlin/src/pins/pins_GTM32_PRO_VB.h
@ -26,7 +26,7 @@
 */

 #ifndef __STM32F1__
-  #error "Oops!  Make sure you have an STM32F1 board selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
 #endif

 #define DEFAULT_MACHINE_NAME "STM32F103VET6"
--- a/Marlin/src/pins/pins_LEAPFROG.h
+++ b/Marlin/src/pins/pins_LEAPFROG.h
@ -25,7 +25,7 @@
 */

 #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
-  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Mega 1280' or 'Mega 2560' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME         "Leapfrog"
--- a/Marlin/src/pins/pins_MEGACONTROLLER.h
+++ b/Marlin/src/pins/pins_MEGACONTROLLER.h
@ -25,7 +25,7 @@
 */

 #ifndef __AVR_ATmega2560__
-  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #if HOTENDS > 2 || E_STEPPERS > 2
--- a/Marlin/src/pins/pins_MEGATRONICS.h
+++ b/Marlin/src/pins/pins_MEGATRONICS.h
@ -25,7 +25,7 @@
 */

 #ifndef __AVR_ATmega2560__
-  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME         "Megatronics"
--- a/Marlin/src/pins/pins_MEGATRONICS_2.h
+++ b/Marlin/src/pins/pins_MEGATRONICS_2.h
@ -25,7 +25,7 @@
 */

 #ifndef __AVR_ATmega2560__
-  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME         "Megatronics v2.0"
--- a/Marlin/src/pins/pins_MEGATRONICS_3.h
+++ b/Marlin/src/pins/pins_MEGATRONICS_3.h
@ -25,7 +25,7 @@
 */

 #ifndef __AVR_ATmega2560__
-  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #if MB(MEGATRONICS_31)
--- a/Marlin/src/pins/pins_MIGHTYBOARD_REVE.h
+++ b/Marlin/src/pins/pins_MIGHTYBOARD_REVE.h
@ -53,7 +53,7 @@
 */

 #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
-  #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Mega 1280' or 'Mega 2560' in 'Tools > Board.'"
 #endif

 #define DEFAULT_MACHINE_NAME    "MB Replicator"
--- a/Marlin/src/pins/pins_MINIRAMBO.h
+++ b/Marlin/src/pins/pins_MINIRAMBO.h
@ -21,17 +21,17 @@
 */

 /**
- * Mini-Rambo pin assignments
+ * Mini-RAMBo pin assignments
 */

 #ifndef __AVR_ATmega2560__
-  #error "Oops!  Make sure you have 'Rambo' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'RAMBo' in 'Tools > Board.'"
 #endif

 #if MB(MINIRAMBO_10A)
-  #define BOARD_NAME "Mini Rambo 1.0a"
+  #define BOARD_NAME "Mini RAMBo 1.0a"
 #else
-  #define BOARD_NAME "Mini Rambo"
+  #define BOARD_NAME "Mini RAMBo"
 #endif

 //
--- a/Marlin/src/pins/pins_MINITRONICS.h
+++ b/Marlin/src/pins/pins_MINITRONICS.h
@ -32,7 +32,7 @@
 */

 #ifndef __AVR_ATmega1281__
-  #error "Oops!  Make sure you have 'Minitronics' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Minitronics' in 'Tools > Board.'"
 #endif

 #if HOTENDS > 2 || E_STEPPERS > 2
--- a/Marlin/src/pins/pins_MKS_SBASE.h
+++ b/Marlin/src/pins/pins_MKS_SBASE.h
@ -26,7 +26,7 @@
 */

 #ifndef TARGET_LPC1768
-  #error "Oops!  Make sure you have the LPC1768 environment selected in your IDE."
+  #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_MORPHEUS.h
+++ b/Marlin/src/pins/pins_MORPHEUS.h
@ -30,7 +30,7 @@
 */

 #ifndef __STM32F1__
-  #error "Oops!  Make sure you have an STM32F1 board selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
 #endif

 #define BOARD_NAME "Bluepill based board"
--- a/Marlin/src/pins/pins_OMCA.h
+++ b/Marlin/src/pins/pins_OMCA.h
@ -23,7 +23,7 @@
 /**
 * Open Motion controller with enable based extruders (Final!)
 *
- *                        ATMega644
+ *                        ATmega644
 *
 *                        +---\/---+
 *            (D 0) PB0  1|        |40  PA0 (AI 0 / D31)
@ -77,7 +77,7 @@
 */

 #if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__)
-  #error "Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. (Final OMCA board)"
+  #error "Oops! Select 'Sanguino' in 'Tools > Board' and 'ATmega644' or 'ATmega644P' in 'Tools > Processor.'"
 #endif

 #define BOARD_NAME         "Final OMCA"
--- a/Marlin/src/pins/pins_OMCA_A.h
+++ b/Marlin/src/pins/pins_OMCA_A.h
@ -23,7 +23,7 @@
 /**
 * Open Motion controller with enable based extruders (Alpha!)
 *
- *                        ATMega644
+ *                        ATmega644
 *
 *                        +---\/---+
 *            (D 0) PB0  1|        |40  PA0 (AI 0 / D31)
@ -76,7 +76,7 @@
 */

 #ifndef __AVR_ATmega644__
-  #error "Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Sanguino' in 'Tools > Board' and ATmega644 in 'Tools > Processor.'"
 #endif

 #define BOARD_NAME         "Alpha OMCA"
--- a/Marlin/src/pins/pins_PRINTRBOARD.h
+++ b/Marlin/src/pins/pins_PRINTRBOARD.h
@ -31,7 +31,7 @@
 *  and with the mainstream Marlin software.
 *
 *  Teensyduino - http://www.pjrc.com/teensy/teensyduino.html
- *    Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu
+ *    Select Teensy++ 2.0 in Arduino IDE from the 'Tools > Board' menu
 *
 *    Installation instructions are at the above URL.  Don't bother loading the
 *    libraries - they are not used with the Marlin software.
@ -46,7 +46,7 @@
 *          hardware directory in Arduino.  The Arduino hardware directory will probably
 *          be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
 *       3. Restart Arduino.
- *       4. Select "Printrboard" from the 'Tools -> Boards' menu.
+ *       4. Select "Printrboard" from the 'Tools > Board' menu.
 *
 *  Teensyduino is the most popular option. Printrboard is used if your board doesn't have
 *  the Teensyduino bootloader on it.
@ -62,7 +62,7 @@
 */

 #ifndef __AVR_AT90USB1286__
-  #error "Oops!  Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME         "Printrboard"
--- a/Marlin/src/pins/pins_PRINTRBOARD_REVF.h
+++ b/Marlin/src/pins/pins_PRINTRBOARD_REVF.h
@ -33,7 +33,7 @@
 *  Teensyduino -  https://www.pjrc.com/teensy/teensyduino.html
 *  Installation - https://www.pjrc.com/teensy/td_download.html
 *
- *    Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu
+ *    Select Teensy++ 2.0 in Arduino IDE from the 'Tools > Board' menu
 *
 *    Note: With Teensyduino extension, the Arduino IDE will report 130048 bytes of program storage space available,
 *    but there is actually only 122880 bytes due to the larger DFU bootloader shipped by default on all Printrboard RevF.
@ -48,7 +48,7 @@
 *          hardware directory in Arduino.  The Arduino hardware directory will probably
 *          be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
 *       3. Restart Arduino.
- *       4. Select "Printrboard" from the 'Tools -> Boards' menu.
+ *       4. Select "Printrboard" from the 'Tools > Board' menu.
 *
 *  Teensyduino is the most popular and easiest option.
 */
@ -63,7 +63,7 @@
 */

 #ifndef __AVR_AT90USB1286__
-  #error "Oops!  Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'"
 #endif

 #ifndef USBCON
--- a/Marlin/src/pins/pins_RADDS.h
+++ b/Marlin/src/pins/pins_RADDS.h
@ -25,7 +25,7 @@
 */

 #ifndef __SAM3X8E__
-  #error "Oops!  Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME         "RADDS"
--- a/Marlin/src/pins/pins_RAMBO.h
+++ b/Marlin/src/pins/pins_RAMBO.h
@ -41,7 +41,7 @@
 */

 #ifndef __AVR_ATmega2560__
-  #error "Oops!  Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME "Rambo"
--- a/Marlin/src/pins/pins_RAMPS.h
+++ b/Marlin/src/pins/pins_RAMPS.h
@ -45,14 +45,14 @@
 */

 #if ENABLED(TARGET_LPC1768)
-  #error "Oops!  Set MOTHERBOARD to an LPC1768-based board when building for LPC1768."
+  #error "Oops! Set MOTHERBOARD to an LPC1768-based board when building for LPC1768."
 #elif defined(__STM32F1__)
-  #error "Oops!  Set MOTHERBOARD to an STM32F1-based board when building for STM32F1."
+  #error "Oops! Set MOTHERBOARD to an STM32F1-based board when building for STM32F1."
 #endif

 #if DISABLED(IS_RAMPS_SMART) && DISABLED(IS_RAMPS_DUO) && DISABLED(IS_RAMPS4DUE) && DISABLED(TARGET_LPC1768)
  #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
-    #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+    #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
  #endif
 #endif

--- a/Marlin/src/pins/pins_RAMPS4DUE.h
+++ b/Marlin/src/pins/pins_RAMPS4DUE.h
@ -39,7 +39,7 @@
 */

 #if !defined(__SAM3X8E__) && !defined(__AVR_ATmega2560__)
-  #error "Oops!  Make sure you have 'Arduino Due' or 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino Due' or 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_RAMPS_DUO.h
+++ b/Marlin/src/pins/pins_RAMPS_DUO.h
@ -43,7 +43,7 @@
 */

 #if !defined(__SAM3X8E__) && !defined(__AVR_ATmega2560__)
-  #error "Oops!  Make sure you have 'Arduino Due' or 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino Due' or 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_RAMPS_FD_V1.h
+++ b/Marlin/src/pins/pins_RAMPS_FD_V1.h
@ -28,7 +28,7 @@
 */

 #ifndef __SAM3X8E__
-  #error "Oops!  Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_RAMPS_OLD.h
+++ b/Marlin/src/pins/pins_RAMPS_OLD.h
@ -25,7 +25,7 @@
 */

 #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
-  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME         "MEGA/RAMPS <1.2"
--- a/Marlin/src/pins/pins_RAMPS_PLUS.h
+++ b/Marlin/src/pins/pins_RAMPS_PLUS.h
@ -38,7 +38,7 @@
 */

 #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
- #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_RAMPS_RE_ARM.h
+++ b/Marlin/src/pins/pins_RAMPS_RE_ARM.h
@ -37,7 +37,7 @@
 // numbers in parenthesis () are the mega2560 equivalent pin numbers

 #ifndef TARGET_LPC1768
-  #error "Oops!  Make sure you have the LPC1768 environment selected in your IDE."
+  #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_RAMPS_SMART.h
+++ b/Marlin/src/pins/pins_RAMPS_SMART.h
@ -60,7 +60,7 @@
 */

 #ifndef __SAM3X8E__
-  #error "Oops!  Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_REMRAM_V1.h
+++ b/Marlin/src/pins/pins_REMRAM_V1.h
@ -21,7 +21,7 @@
 */

 #ifndef STM32F7xx
-  #error "Oops!  Make sure you have an STM32F7 board selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select an STM32F7 board in 'Tools > Board.'"
 #endif

 #define DEFAULT_MACHINE_NAME "RemRam"
--- a/Marlin/src/pins/pins_RUMBA.h
+++ b/Marlin/src/pins/pins_RUMBA.h
@ -25,7 +25,7 @@
 */

 #ifndef __AVR_ATmega2560__
-  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #if HOTENDS > 3 || E_STEPPERS > 3
--- a/Marlin/src/pins/pins_RURAMPS4D_11.h
+++ b/Marlin/src/pins/pins_RURAMPS4D_11.h
@ -33,7 +33,7 @@
 */

 #ifndef __SAM3X8E__
-  #error "Oops!  Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_RURAMPS4D_13.h
+++ b/Marlin/src/pins/pins_RURAMPS4D_13.h
@ -33,7 +33,7 @@
 */

 #ifndef __SAM3X8E__
-  #error "Oops!  Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_SANGUINOLOLU_11.h
+++ b/Marlin/src/pins/pins_SANGUINOLOLU_11.h
@ -52,7 +52,7 @@
 */

 #if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__)
-  #error "Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644P' or 'ATmega1284P' in 'Tools > Processor.'"
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_SAV_MKI.h
+++ b/Marlin/src/pins/pins_SAV_MKI.h
@ -31,7 +31,7 @@
 *  and with the mainstream Marlin software.
 *
 *  Teensyduino - http://www.pjrc.com/teensy/teensyduino.html
- *    Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu
+ *    Select Teensy++ 2.0 in Arduino IDE from the 'Tools > Board' menu
 *
 *    Installation instructions are at the above URL.  Don't bother loading the
 *    libraries - they are not used with the Marlin software.
@ -46,7 +46,7 @@
 *          hardware directory in Arduino.  The Arduino hardware directory will probably
 *          be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
 *       3. Restart Arduino.
- *       4. Select "Printrboard" from the 'Tools -> Boards' menu.
+ *       4. Select "Printrboard" from the 'Tools > Board' menu.
 *
 *  Teensyduino is the most popular option. Printrboard is used if your board doesn't have
 *  the Teensyduino bootloader on it.
@ -62,7 +62,7 @@
 */

 #ifndef __AVR_AT90USB1286__
-  #error "Oops!  Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'"
 #endif

 #define DEFAULT_MACHINE_NAME    "SAV MkI"
--- a/Marlin/src/pins/pins_SCOOVO_X9H.h
+++ b/Marlin/src/pins/pins_SCOOVO_X9H.h
@ -25,7 +25,7 @@
 ************************************************/

 #ifndef __AVR_ATmega2560__
-  #error "Oops!  Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME "Scoovo X9H"
--- a/Marlin/src/pins/pins_SELENA_COMPACT.h
+++ b/Marlin/src/pins/pins_SELENA_COMPACT.h
@ -26,7 +26,7 @@
 */

 #ifndef TARGET_LPC1768
-  #error "Oops!  Make sure you have the LPC1768 environment selected in your IDE."
+  #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_SETHI.h
+++ b/Marlin/src/pins/pins_SETHI.h
@ -50,7 +50,7 @@
 */

 #if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
-  #error "Oops!  Make sure you have 'Sethi 3D' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644', 'ATmega644P', or 'ATmega1284P' in 'Tools > Processor.'"
 #endif

 #define BOARD_NAME "Sethi 3D_1"
--- a/Marlin/src/pins/pins_SILVER_GATE.h
+++ b/Marlin/src/pins/pins_SILVER_GATE.h
@ -21,7 +21,7 @@
 */

 #if !defined(__AVR_ATmega1281__) && !defined(__AVR_ATmega2561__)
-  #error Oops!  Make sure you have 'Silvergate' selected from the 'Tools -> Boards' menu.
+  #error "Oops! Select 'Silvergate' in 'Tools > Board.'"
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_SMOOTHIEBOARD.h
+++ b/Marlin/src/pins/pins_SMOOTHIEBOARD.h
@ -26,7 +26,7 @@
 */

 #ifndef TARGET_LPC1768
-  #error "Oops!  Make sure you have the LPC1768 environment selected in your IDE."
+  #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
 #endif

 #ifndef BOARD_NAME
--- a/Marlin/src/pins/pins_STM32F1R.h
+++ b/Marlin/src/pins/pins_STM32F1R.h
@ -21,7 +21,7 @@
 */

 #ifndef __STM32F1__
-  #error "Oops!  Make sure you have an STM32F1 board selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
 #endif

 /**
--- a/Marlin/src/pins/pins_STM32F4.h
+++ b/Marlin/src/pins/pins_STM32F4.h
@ -21,7 +21,7 @@
 */

 #if !defined(STM32F4) && !defined(STM32F4xx)
-  #error "Oops!  Make sure you have an STM32F4 board selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select an STM32F4 board in 'Tools > Board.'"
 #endif

 #define DEFAULT_MACHINE_NAME "STM32F407VET6"
--- a/Marlin/src/pins/pins_STM3R_MINI.h
+++ b/Marlin/src/pins/pins_STM3R_MINI.h
@ -21,7 +21,7 @@
 */

 #if !defined(__STM32F1__) && !defined(__STM32F4__)
-  #error "Oops!  Make sure you have an STM32F1/4 board selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select an STM32F1/4 board in 'Tools > Board.'"
 #endif

 /**
--- a/Marlin/src/pins/pins_TEENSY2.h
+++ b/Marlin/src/pins/pins_TEENSY2.h
@ -31,7 +31,7 @@
 *  and with the mainstream Marlin software.
 *
 *  Teensyduino - http://www.pjrc.com/teensy/teensyduino.html
- *    Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu
+ *    Select Teensy++ 2.0 in Arduino IDE from the 'Tools > Board' menu
 *
 *    Installation instructions are at the above URL.  Don't bother loading the
 *    libraries - they are not used with the Marlin software.
@ -46,7 +46,7 @@
 *          hardware directory in Arduino.  The Arduino hardware directory will probably
 *          be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
 *       3. Restart Arduino.
- *       4. Select "Printrboard" from the 'Tools -> Boards' menu.
+ *       4. Select "Printrboard" from the 'Tools > Board' menu.
 *
 *  Teensyduino is the most popular option. Printrboard is used if your board doesn't have
 *  the Teensyduino bootloader on it.
@ -107,7 +107,7 @@
 */

 #ifndef __AVR_AT90USB1286__
-  #error "Oops!  Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME         "Teensy++2.0"
--- a/Marlin/src/pins/pins_TEENSY31_32.h
+++ b/Marlin/src/pins/pins_TEENSY31_32.h
@ -27,7 +27,7 @@
 ****************************************************************************************/

 #if !IS_32BIT_TEENSY
-  #error "Oops!  Make sure you have 'Teensy 3.1' or 'Teensy 3.2' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Teensy 3.1' or 'Teensy 3.2' in 'Tools > Board.'"
 #endif

 #if IS_TEENSY32
--- a/Marlin/src/pins/pins_TEENSY35_36.h
+++ b/Marlin/src/pins/pins_TEENSY35_36.h
@ -27,7 +27,7 @@
 ****************************************************************************************/

 #if !IS_32BIT_TEENSY
-  #error "Oops!  Make sure you have 'Teensy 3.5' or 'Teensy 3.6' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Teensy 3.5' or 'Teensy 3.6' in 'Tools > Board.'"
 #endif

 #if IS_TEENSY35
--- a/Marlin/src/pins/pins_TEENSYLU.h
+++ b/Marlin/src/pins/pins_TEENSYLU.h
@ -31,7 +31,7 @@
 *  and with the mainstream Marlin software.  All have been used with Arduino 1.6.12
 *
 *  Teensyduino - http://www.pjrc.com/teensy/teensyduino.html
- *    Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu
+ *    Select Teensy++ 2.0 in Arduino IDE from the 'Tools > Board' menu
 *
 *    Installation instructions are at the above URL.  Don't bother loading the
 *    libraries - they are not used with the Marlin software.
@ -48,7 +48,7 @@
 *          hardware directory in Arduino.  The Arduino hardware directory will probably
 *          be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
 *       3. Restart Arduino.
- *       4. Select "Printrboard" from the 'Tools -> Boards' menu.
+ *       4. Select "Printrboard" from the 'Tools > Board' menu.
 *
 *  Teensyduino is the most popular option. Printrboard is used if your board doesn't have
 *  the Teensyduino bootloader on it.
@ -74,7 +74,7 @@
  */

 #if !defined(__AVR_AT90USB1286__) && !defined(__AVR_AT90USB1286P__)
-  #error "Oops!  Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'"
 #endif

 #define BOARD_NAME         "Teensylu"
--- a/Marlin/src/pins/pins_THE_BORG.h
+++ b/Marlin/src/pins/pins_THE_BORG.h
@ -21,7 +21,7 @@
 */

 #if !defined(STM32F7)
-  #error "Oops!  Make sure you have an STM32F7 board selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select an STM32F7 board in 'Tools > Board.'"
 #endif

 #define DEFAULT_MACHINE_NAME "The-Borge"
--- a/Marlin/src/pins/pins_ULTIMAIN_2.h
+++ b/Marlin/src/pins/pins_ULTIMAIN_2.h
@ -33,7 +33,7 @@
 */

 #ifndef __AVR_ATmega2560__
-  #error "Oops!  Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #define DEFAULT_MACHINE_NAME    "Ultimaker"
--- a/Marlin/src/pins/pins_ULTIMAKER.h
+++ b/Marlin/src/pins/pins_ULTIMAKER.h
@ -33,7 +33,7 @@
 */

 #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
-  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #define DEFAULT_MACHINE_NAME    "Ultimaker"
--- a/Marlin/src/pins/pins_ULTIMAKER_OLD.h
+++ b/Marlin/src/pins/pins_ULTIMAKER_OLD.h
@ -61,7 +61,7 @@


 #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
-  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

 #define DEFAULT_MACHINE_NAME    "Ultimaker"
--- a/Marlin/src/pins/pins_ULTRATRONICS_PRO.h
+++ b/Marlin/src/pins/pins_ULTRATRONICS_PRO.h
@ -28,7 +28,7 @@
 #define BOARD_NAME "Ultratronics v1.0"

 #ifndef ARDUINO_ARCH_SAM
-  #error Oops!  Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu.
+  #error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
 #endif

 //