zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Refactor heater watch, job timer auto-start (#16725)

Browse source
This commit is contained in:
Scott Lahteine 2020-01-30 03:24:43 -06:00 committed by GitHub
parent 50889c0f94
commit 9caf5c05e7
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
7 changed files with 113 additions and 57 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
Marlin/src/feature/pause.cpp
View file

@ -564,7 +564,7 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
#endif
// Re-enable the heaters if they timed out
HOTEND_LOOP() thermalManager.reset_heater_idle_timer(e);
HOTEND_LOOP() thermalManager.reset_hotend_idle_timer(e);
// Wait for the heaters to reach the target temperatures
ensure_safe_temperature();
@ -633,7 +633,7 @@ void resume_print(const float &slow_load_length/*=0*/, const float &fast_load_le
bool nozzle_timed_out = false;
HOTEND_LOOP() {
nozzle_timed_out |= thermalManager.hotend_idle[e].timed_out;
thermalManager.reset_heater_idle_timer(e);
thermalManager.reset_hotend_idle_timer(e);
}
if (nozzle_timed_out || thermalManager.hotEnoughToExtrude(active_extruder)) // Load the new filament

30
Marlin/src/gcode/temperature/M104_M109.cpp
View file

@ -20,6 +20,12 @@
*
*/
/**
* gcode/temperature/M104_M109.cpp
*
* Hotend target temperature control
*/
#include "../../inc/MarlinConfigPre.h"
#if EXTRUDERS
@ -73,14 +79,11 @@ void GcodeSuite::M104() {
#if ENABLED(PRINTJOB_TIMER_AUTOSTART)
/**
* Stop the timer at the end of print. Start is managed by 'heat and wait' M109.
* We use half EXTRUDE_MINTEMP here to allow nozzles to be put into hot
* standby mode, for instance in a dual extruder setup, without affecting
* the running print timer.
* Hotends use EXTRUDE_MINTEMP / 2 to allow nozzles to be put into hot standby
* mode, for instance in a dual extruder setup, without affecting the running
* print timer.
*/
if (temp <= (EXTRUDE_MINTEMP) / 2) {
print_job_timer.stop();
ui.reset_status();
}
thermalManager.check_timer_autostart(false, true);
#endif
}
@ -90,8 +93,10 @@ void GcodeSuite::M104() {
}
/**
* M109: Sxxx Wait for extruder(s) to reach temperature. Waits only when heating.
* Rxxx Wait for extruder(s) to reach temperature. Waits when heating and cooling.
* M109: Sxxx Wait for hotend(s) to reach temperature. Waits only when heating.
* Rxxx Wait for hotend(s) to reach temperature. Waits when heating and cooling.
*
* With PRINTJOB_TIMER_AUTOSTART also start the job timer on heating and stop it if turned off.
*/
void GcodeSuite::M109() {
@ -125,12 +130,7 @@ void GcodeSuite::M109() {
* standby mode, (e.g., in a dual extruder setup) without affecting
* the running print timer.
*/
if (parser.value_celsius() <= (EXTRUDE_MINTEMP) / 2) {
print_job_timer.stop();
ui.reset_status();
}
else
startOrResumeJob();
thermalManager.check_timer_autostart(true, true);
#endif
#if HAS_DISPLAY

11
Marlin/src/gcode/temperature/M140_M190.cpp
View file

@ -20,6 +20,12 @@
*
*/
/**
* gcode/temperature/M140_M190.cpp
*
* Bed target temperature control
*/
#include "../../inc/MarlinConfig.h"
#if HAS_HEATED_BED
@ -50,6 +56,8 @@ void GcodeSuite::M140() {
/**
* M190: Sxxx Wait for bed current temp to reach target temp. Waits only when heating
* Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling
*
* With PRINTJOB_TIMER_AUTOSTART also start the job timer on heating.
*/
void GcodeSuite::M190() {
if (DEBUGGING(DRYRUN)) return;
@ -58,8 +66,7 @@ void GcodeSuite::M190() {
if (no_wait_for_cooling || parser.seenval('R')) {
thermalManager.setTargetBed(parser.value_celsius());
#if ENABLED(PRINTJOB_TIMER_AUTOSTART)
if (parser.value_celsius() > BED_MINTEMP)
startOrResumeJob();
thermalManager.check_timer_autostart(true, false);
#endif
}
else return;

9
Marlin/src/gcode/temperature/M141_M191.cpp
View file

@ -20,6 +20,12 @@
*
*/
/**
* gcode/temperature/M141_M191.cpp
*
* Chamber target temperature control
*/
#include "../../inc/MarlinConfig.h"
#if HAS_HEATED_CHAMBER
@ -59,8 +65,7 @@ void GcodeSuite::M191() {
if (no_wait_for_cooling || parser.seenval('R')) {
thermalManager.setTargetChamber(parser.value_celsius());
#if ENABLED(PRINTJOB_TIMER_AUTOSTART)
if (parser.value_celsius() > CHAMBER_MINTEMP)
startOrResumeJob();
thermalManager.check_timer_autostart(true, false);
#endif
}
else return;

4
Marlin/src/lcd/extensible_ui/ui_api.cpp
View file

@ -171,7 +171,7 @@ namespace ExtUI {
void enableHeater(const extruder_t extruder) {
#if HOTENDS && HEATER_IDLE_HANDLER
thermalManager.reset_heater_idle_timer(extruder - E0);
thermalManager.reset_hotend_idle_timer(extruder - E0);
#else
UNUSED(extruder);
#endif
@ -190,7 +190,7 @@ namespace ExtUI {
#endif
default:
#if HOTENDS
thermalManager.reset_heater_idle_timer(heater - H0);
thermalManager.reset_hotend_idle_timer(heater - H0);
#endif
break;
}

61
Marlin/src/module/temperature.cpp
View file

@ -220,10 +220,10 @@ Temperature thermalManager;
#endif // FAN_COUNT > 0
#if WATCH_HOTENDS
heater_watch_t Temperature::watch_hotend[HOTENDS]; // = { { 0 } }
hotend_watch_t Temperature::watch_hotend[HOTENDS]; // = { { 0 } }
#endif
#if HEATER_IDLE_HANDLER
heater_idle_t Temperature::hotend_idle[HOTENDS]; // = { { 0 } }
hotend_idle_t Temperature::hotend_idle[HOTENDS]; // = { { 0 } }
#endif
#if HAS_HEATED_BED
@ -236,13 +236,13 @@ Temperature thermalManager;
int16_t Temperature::maxtemp_raw_BED = HEATER_BED_RAW_HI_TEMP;
#endif
#if WATCH_BED
heater_watch_t Temperature::watch_bed; // = { 0 }
bed_watch_t Temperature::watch_bed; // = { 0 }
#endif
#if DISABLED(PIDTEMPBED)
millis_t Temperature::next_bed_check_ms;
#endif
#if HEATER_IDLE_HANDLER
heater_idle_t Temperature::bed_idle; // = { 0 }
hotend_idle_t Temperature::bed_idle; // = { 0 }
#endif
#endif // HAS_HEATED_BED
@ -256,7 +256,7 @@ Temperature thermalManager;
int16_t Temperature::maxtemp_raw_CHAMBER = HEATER_CHAMBER_RAW_HI_TEMP;
#endif
#if WATCH_CHAMBER
heater_watch_t Temperature::watch_chamber{0};
chamber_watch_t Temperature::watch_chamber{0};
#endif
millis_t Temperature::next_chamber_check_ms;
#endif // HAS_HEATED_CHAMBER
@ -1974,12 +1974,7 @@ void Temperature::init() {
*/
void Temperature::start_watching_hotend(const uint8_t E_NAME) {
const uint8_t ee = HOTEND_INDEX;
if (degTargetHotend(ee) && degHotend(ee) < degTargetHotend(ee) - (WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1)) {
watch_hotend[ee].target = degHotend(ee) + WATCH_TEMP_INCREASE;
watch_hotend[ee].next_ms = millis() + (WATCH_TEMP_PERIOD) * 1000UL;
}
else
watch_hotend[ee].next_ms = 0;
watch_hotend[ee].restart(degHotend(ee), degTargetHotend(ee));
}
#endif
@ -1990,12 +1985,7 @@ void Temperature::init() {
* This is called when the temperature is set. (M140, M190)
*/
void Temperature::start_watching_bed() {
if (degTargetBed() && degBed() < degTargetBed() - (WATCH_BED_TEMP_INCREASE + TEMP_BED_HYSTERESIS + 1)) {
watch_bed.target = degBed() + WATCH_BED_TEMP_INCREASE;
watch_bed.next_ms = millis() + (WATCH_BED_TEMP_PERIOD) * 1000UL;
}
else
watch_bed.next_ms = 0;
watch_bed.restart(degBed(), degTargetBed());
}
#endif
@ -2006,12 +1996,7 @@ void Temperature::init() {
* This is called when the temperature is set. (M141, M191)
*/
void Temperature::start_watching_chamber() {
if (degChamber() < degTargetChamber() - (WATCH_CHAMBER_TEMP_INCREASE + TEMP_CHAMBER_HYSTERESIS + 1)) {
watch_chamber.target = degChamber() + WATCH_CHAMBER_TEMP_INCREASE;
watch_chamber.next_ms = millis() + (WATCH_CHAMBER_TEMP_PERIOD) * 1000UL;
}
else
watch_chamber.next_ms = 0;
watch_chamber.restart(degChamber(), degTargetChamber());
}
#endif
@ -2154,6 +2139,34 @@ void Temperature::disable_all_heaters() {
#endif
}
#if ENABLED(PRINTJOB_TIMER_AUTOSTART)
bool Temperature::over_autostart_threshold() {
#if HOTENDS
HOTEND_LOOP() if (degTargetHotend(e) < (EXTRUDE_MINTEMP) / 2) return true;
#endif
#if HAS_HEATED_BED
if (degTargetBed() > BED_MINTEMP) return true;
#endif
#if HAS_HEATED_CHAMBER
if (degTargetChamber() > CHAMBER_MINTEMP) return true;
#endif
return false;
}
void Temperature::check_timer_autostart(const bool can_start, const bool can_stop) {
if (over_autostart_threshold()) {
if (can_start) startOrResumeJob();
}
else if (can_stop) {
print_job_timer.stop();
ui.reset_status();
}
}
#endif
#if ENABLED(PROBING_HEATERS_OFF)
void Temperature::pause(const bool p) {
@ -2166,7 +2179,7 @@ void Temperature::disable_all_heaters() {
#endif
}
else {
HOTEND_LOOP() reset_heater_idle_timer(e);
HOTEND_LOOP() reset_hotend_idle_timer(e);
#if HAS_HEATED_BED
reset_bed_idle_timer();
#endif

51
Marlin/src/module/temperature.h
View file

@ -228,15 +228,38 @@ typedef struct {
inline void start(const millis_t &ms) { timeout_ms = millis() + ms; timed_out = false; }
inline void reset() { timeout_ms = 0; timed_out = false; }
inline void expire() { start(0); }
} heater_idle_t;
} hotend_idle_t;
// Heater watch handling
typedef struct {
template <int INCREASE, int HYSTERESIS, millis_t PERIOD>
struct HeaterWatch {
uint16_t target;
millis_t next_ms;
inline bool elapsed(const millis_t &ms) { return next_ms && ELAPSED(ms, next_ms); }
inline bool elapsed() { return elapsed(millis()); }
} heater_watch_t;
inline void restart(const int16_t curr, const int16_t tgt) {
if (tgt) {
const int16_t newtarget = curr + INCREASE;
if (newtarget < tgt - HYSTERESIS - 1) {
target = newtarget;
next_ms = millis() + PERIOD * 1000UL;
return;
}
}
next_ms = 0;
}
};
#if WATCH_HOTENDS
typedef struct HeaterWatch<WATCH_TEMP_INCREASE, TEMP_HYSTERESIS, WATCH_TEMP_PERIOD> hotend_watch_t;
#endif
#if WATCH_BED
typedef struct HeaterWatch<WATCH_BED_TEMP_INCREASE, TEMP_BED_HYSTERESIS, WATCH_BED_TEMP_PERIOD> bed_watch_t;
#endif
#if WATCH_CHAMBER
typedef struct HeaterWatch<WATCH_CHAMBER_TEMP_INCREASE, TEMP_CHAMBER_HYSTERESIS, WATCH_CHAMBER_TEMP_PERIOD> chamber_watch_t;
#endif
// Temperature sensor read value ranges
typedef struct { int16_t raw_min, raw_max; } raw_range_t;
@ -345,12 +368,12 @@ class Temperature {
FORCE_INLINE static bool targetHotEnoughToExtrude(const uint8_t e) { return !targetTooColdToExtrude(e); }
#if HEATER_IDLE_HANDLER
static heater_idle_t hotend_idle[HOTENDS];
static hotend_idle_t hotend_idle[HOTENDS];
#if HAS_HEATED_BED
static heater_idle_t bed_idle;
static hotend_idle_t bed_idle;
#endif
#if HAS_HEATED_CHAMBER
static heater_idle_t chamber_idle;
static hotend_idle_t chamber_idle;
#endif
#endif
@ -363,7 +386,7 @@ class Temperature {
static volatile bool raw_temps_ready;
#if WATCH_HOTENDS
static heater_watch_t watch_hotend[HOTENDS];
static hotend_watch_t watch_hotend[HOTENDS];
#endif
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
@ -382,7 +405,7 @@ class Temperature {
#if HAS_HEATED_BED
#if WATCH_BED
static heater_watch_t watch_bed;
static bed_watch_t watch_bed;
#endif
#if DISABLED(PIDTEMPBED)
static millis_t next_bed_check_ms;
@ -397,7 +420,7 @@ class Temperature {
#if HAS_HEATED_CHAMBER
#if WATCH_CHAMBER
static heater_watch_t watch_chamber;
static chamber_watch_t watch_chamber;
#endif
static millis_t next_chamber_check_ms;
#ifdef CHAMBER_MINTEMP
@ -736,6 +759,14 @@ class Temperature {
*/
static void disable_all_heaters();
#if ENABLED(PRINTJOB_TIMER_AUTOSTART)
/**
* Methods to check if heaters are enabled, indicating an active job
*/
static bool over_autostart_threshold();
static void check_timer_autostart(const bool can_start, const bool can_stop);
#endif
/**
* Perform auto-tuning for hotend or bed in response to M303
*/
@ -768,7 +799,7 @@ class Temperature {
#if HEATER_IDLE_HANDLER
static void reset_heater_idle_timer(const uint8_t E_NAME) {
static void reset_hotend_idle_timer(const uint8_t E_NAME) {
hotend_idle[HOTEND_INDEX].reset();
start_watching_hotend(HOTEND_INDEX);
}