Merge pull request #8706 from thinkyhead/bf2_multi_probe
[2.0.x] MULTIPLE_PROBING — Why stop at 2?
This commit is contained in:
commit
9d65e61f39
|
@ -690,14 +690,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -742,7 +742,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -690,14 +690,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -742,7 +742,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -710,14 +710,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -742,7 +742,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -690,14 +690,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -769,14 +769,16 @@
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
//#define XY_PROBE_SPEED 6000
|
//#define XY_PROBE_SPEED 6000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 3)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 3)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -742,7 +742,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -696,14 +696,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 6000
|
#define XY_PROBE_SPEED 6000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -742,7 +742,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -690,14 +690,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -743,7 +743,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -681,14 +681,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -742,7 +742,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -691,14 +691,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -742,7 +742,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -681,14 +681,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -742,7 +742,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -689,14 +689,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -742,7 +742,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -700,14 +700,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -742,7 +742,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -672,14 +672,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -742,7 +742,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -672,14 +672,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -696,14 +696,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 7500
|
#define XY_PROBE_SPEED 7500
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -742,7 +742,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -705,14 +705,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -690,14 +690,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -694,14 +694,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -742,7 +742,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -714,14 +714,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
//#define XY_PROBE_SPEED 8000
|
//#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
//#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
//#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
//#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
//#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -739,7 +739,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -694,14 +694,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -694,14 +694,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -743,7 +743,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -691,14 +691,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -750,7 +750,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -690,14 +690,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -688,14 +688,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -742,7 +742,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -702,14 +702,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -742,7 +742,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -693,14 +693,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -721,14 +721,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -731,7 +731,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -741,14 +741,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -742,7 +742,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -690,14 +690,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -742,7 +742,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -719,14 +719,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -753,7 +753,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -690,14 +690,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -743,7 +743,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -690,14 +690,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -703,14 +703,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -744,7 +744,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -690,14 +690,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -770,14 +770,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 5000
|
#define XY_PROBE_SPEED 5000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST) / 6
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST) / 6
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
|
* Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
|
||||||
|
|
|
@ -744,7 +744,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -770,14 +770,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 2000
|
#define XY_PROBE_SPEED 2000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
|
* Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
|
||||||
|
|
|
@ -744,7 +744,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -760,14 +760,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 4000
|
#define XY_PROBE_SPEED 4000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
|
* Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
|
||||||
|
|
|
@ -744,7 +744,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -760,14 +760,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 4000
|
#define XY_PROBE_SPEED 4000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
|
* Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
|
||||||
|
|
|
@ -744,7 +744,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -756,14 +756,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
|
* Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
|
||||||
|
|
|
@ -749,7 +749,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -772,14 +772,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
|
* Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
|
||||||
|
|
|
@ -744,7 +744,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -703,14 +703,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 7500
|
#define XY_PROBE_SPEED 7500
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -742,7 +742,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -693,14 +693,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -742,7 +742,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -685,14 +685,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -742,7 +742,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -695,14 +695,16 @@
|
||||||
// X and Y axis travel speed (mm/m) between probes
|
// X and Y axis travel speed (mm/m) between probes
|
||||||
#define XY_PROBE_SPEED 8000
|
#define XY_PROBE_SPEED 8000
|
||||||
|
|
||||||
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
|
// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||||
|
|
||||||
// Speed for the "accurate" probe of each point
|
// Speed for the "accurate" probe of each point
|
||||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||||
|
|
||||||
// Use double touch for probing
|
// The number of probes to perform at each point.
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||||
|
// Set to 3 or more for slow probes, averaging the results.
|
||||||
|
//#define MULTIPLE_PROBING 2
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Z probes require clearance when deploying, stowing, and moving between
|
* Z probes require clearance when deploying, stowing, and moving between
|
||||||
|
|
|
@ -743,7 +743,7 @@
|
||||||
//#define BEZIER_CURVE_SUPPORT
|
//#define BEZIER_CURVE_SUPPORT
|
||||||
|
|
||||||
// G38.2 and G38.3 Probe Target
|
// G38.2 and G38.3 Probe Target
|
||||||
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
|
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||||
//#define G38_PROBE_TARGET
|
//#define G38_PROBE_TARGET
|
||||||
#if ENABLED(G38_PROBE_TARGET)
|
#if ENABLED(G38_PROBE_TARGET)
|
||||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||||
|
|
|
@ -35,7 +35,7 @@ static bool G38_run_probe() {
|
||||||
|
|
||||||
bool G38_pass_fail = false;
|
bool G38_pass_fail = false;
|
||||||
|
|
||||||
#if ENABLED(PROBE_DOUBLE_TOUCH)
|
#if MULTIPLE_PROBING > 1
|
||||||
// Get direction of move and retract
|
// Get direction of move and retract
|
||||||
float retract_mm[XYZ];
|
float retract_mm[XYZ];
|
||||||
LOOP_XYZ(i) {
|
LOOP_XYZ(i) {
|
||||||
|
@ -62,7 +62,7 @@ static bool G38_run_probe() {
|
||||||
|
|
||||||
G38_pass_fail = true;
|
G38_pass_fail = true;
|
||||||
|
|
||||||
#if ENABLED(PROBE_DOUBLE_TOUCH)
|
#if MULTIPLE_PROBING > 1
|
||||||
// Move away by the retract distance
|
// Move away by the retract distance
|
||||||
set_destination_from_current();
|
set_destination_from_current();
|
||||||
LOOP_XYZ(i) destination[i] += retract_mm[i];
|
LOOP_XYZ(i) destination[i] += retract_mm[i];
|
||||||
|
|
|
@ -227,6 +227,8 @@
|
||||||
#error "UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN is now SEGMENT_LEVELED_MOVES. Please update your configuration."
|
#error "UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN is now SEGMENT_LEVELED_MOVES. Please update your configuration."
|
||||||
#elif HAS_PID_HEATING && (defined(K1) || !defined(PID_K1))
|
#elif HAS_PID_HEATING && (defined(K1) || !defined(PID_K1))
|
||||||
#error "K1 is now PID_K1. Please update your configuration."
|
#error "K1 is now PID_K1. Please update your configuration."
|
||||||
|
#elif defined(PROBE_DOUBLE_TOUCH)
|
||||||
|
#error "PROBE_DOUBLE_TOUCH is now MULTIPLE_PROBING. Please update your configuration."
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
/**
|
/**
|
||||||
|
@ -711,6 +713,10 @@ static_assert(1 >= 0
|
||||||
#error "Probes need Z_CLEARANCE_BETWEEN_PROBES >= 0."
|
#error "Probes need Z_CLEARANCE_BETWEEN_PROBES >= 0."
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#if MULTIPLE_PROBING && MULTIPLE_PROBING < 2
|
||||||
|
#error "MULTIPLE_PROBING must be >= 2."
|
||||||
|
#endif
|
||||||
|
|
||||||
#else
|
#else
|
||||||
|
|
||||||
/**
|
/**
|
||||||
|
|
|
@ -507,7 +507,7 @@ static bool do_probe_move(const float z, const float fr_mm_m) {
|
||||||
}
|
}
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* @details Used by probe_pt to do a single Z probe.
|
* @details Used by probe_pt to do a single Z probe at the current position.
|
||||||
* Leaves current_position[Z_AXIS] at the height where the probe triggered.
|
* Leaves current_position[Z_AXIS] at the height where the probe triggered.
|
||||||
*
|
*
|
||||||
* @return The raw Z position where the probe was triggered
|
* @return The raw Z position where the probe was triggered
|
||||||
|
@ -521,7 +521,8 @@ static float run_z_probe() {
|
||||||
// Prevent stepper_inactive_time from running out and EXTRUDER_RUNOUT_PREVENT from extruding
|
// Prevent stepper_inactive_time from running out and EXTRUDER_RUNOUT_PREVENT from extruding
|
||||||
gcode.refresh_cmd_timeout();
|
gcode.refresh_cmd_timeout();
|
||||||
|
|
||||||
#if ENABLED(PROBE_DOUBLE_TOUCH)
|
// Double-probing does a fast probe followed by a slow probe
|
||||||
|
#if MULTIPLE_PROBING == 2
|
||||||
|
|
||||||
// Do a first probe at the fast speed
|
// Do a first probe at the fast speed
|
||||||
if (do_probe_move(-10, Z_PROBE_SPEED_FAST)) return NAN;
|
if (do_probe_move(-10, Z_PROBE_SPEED_FAST)) return NAN;
|
||||||
|
@ -549,22 +550,49 @@ static float run_z_probe() {
|
||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Move down slowly to find bed, not too far
|
#if MULTIPLE_PROBING > 2
|
||||||
if (do_probe_move(-10, Z_PROBE_SPEED_SLOW)) return NAN;
|
float probes_total = 0;
|
||||||
|
for (uint8_t p = MULTIPLE_PROBING + 1; --p;) {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Move down slowly to find bed, not too far
|
||||||
|
if (do_probe_move(-10, Z_PROBE_SPEED_SLOW)) return NAN;
|
||||||
|
|
||||||
|
#if MULTIPLE_PROBING > 2
|
||||||
|
probes_total += current_position[Z_AXIS];
|
||||||
|
if (p > 1) do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_BETWEEN_PROBES, MMM_TO_MMS(Z_PROBE_SPEED_FAST));
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if MULTIPLE_PROBING > 2
|
||||||
|
|
||||||
|
// Return the average value of all probes
|
||||||
|
return probes_total * (1.0 / (MULTIPLE_PROBING));
|
||||||
|
|
||||||
|
#elif MULTIPLE_PROBING == 2
|
||||||
|
|
||||||
|
const float z2 = current_position[Z_AXIS];
|
||||||
|
|
||||||
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||||
|
if (DEBUGGING(LEVELING)) {
|
||||||
|
SERIAL_ECHOPAIR("2nd Probe Z:", z2);
|
||||||
|
SERIAL_ECHOLNPAIR(" Discrepancy:", first_probe_z - z2);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Return a weighted average of the fast and slow probes
|
||||||
|
return (z2 * 3.0 + first_probe_z * 2.0) * 0.2;
|
||||||
|
|
||||||
|
#else
|
||||||
|
|
||||||
|
// Return the single probe result
|
||||||
|
return current_position[Z_AXIS];
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||||
if (DEBUGGING(LEVELING)) DEBUG_POS("<<< run_z_probe", current_position);
|
if (DEBUGGING(LEVELING)) DEBUG_POS("<<< run_z_probe", current_position);
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Debug: compare probe heights
|
|
||||||
#if ENABLED(PROBE_DOUBLE_TOUCH) && ENABLED(DEBUG_LEVELING_FEATURE)
|
|
||||||
if (DEBUGGING(LEVELING)) {
|
|
||||||
SERIAL_ECHOPAIR("2nd Probe Z:", current_position[Z_AXIS]);
|
|
||||||
SERIAL_ECHOLNPAIR(" Discrepancy:", first_probe_z - current_position[Z_AXIS]);
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
return current_position[Z_AXIS];
|
|
||||||
}
|
}
|
||||||
|
|
||||||
/**
|
/**
|
||||||
|
|
Loading…
Reference in a new issue