zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

frameworks whitespace cleanup

Browse source
This commit is contained in:
Scott Lahteine 2017-09-27 04:57:00 -05:00
parent 599f2ad983
commit 9dd5390d7d
8 changed files with 93 additions and 93 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

26
frameworks/CMSIS/LPC1768/Re-ARM/startup_LPC17xx.S
View file

@ -1,13 +1,13 @@
/* File: startup_ARMCM3.s /* File: startup_ARMCM3.s
* Purpose: startup file for Cortex-M3/M4 devices. Should use with * Purpose: startup file for Cortex-M3/M4 devices. Should use with
* GNU Tools for ARM Embedded Processors * GNU Tools for ARM Embedded Processors
* Version: V1.1 * Version: V1.1
* Date: 17 June 2011 * Date: 17 June 2011
* *
* Copyright (C) 2011 ARM Limited. All rights reserved. * Copyright (C) 2011 ARM Limited. All rights reserved.
* ARM Limited (ARM) is supplying this software for use with Cortex-M3/M4 * ARM Limited (ARM) is supplying this software for use with Cortex-M3/M4
* processor based microcontrollers. This file can be freely distributed * processor based microcontrollers. This file can be freely distributed
* within development tools that are supporting such ARM based processors. * within development tools that are supporting such ARM based processors.
* *
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
* OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
@ -20,12 +20,12 @@
/* Memory Model /* Memory Model
The HEAP starts at the end of the DATA section and grows upward. The HEAP starts at the end of the DATA section and grows upward.
The STACK starts at the end of the RAM and grows downward. The STACK starts at the end of the RAM and grows downward.
The HEAP and stack STACK are only checked at compile time: The HEAP and stack STACK are only checked at compile time:
(DATA_SIZE + HEAP_SIZE + STACK_SIZE) < RAM_SIZE (DATA_SIZE + HEAP_SIZE + STACK_SIZE) < RAM_SIZE
This is just a check for the bare minimum for the Heap+Stack area before This is just a check for the bare minimum for the Heap+Stack area before
aborting compilation, it is not the run time limit: aborting compilation, it is not the run time limit:
Heap_Size + Stack_Size = 0x80 + 0x80 = 0x100 Heap_Size + Stack_Size = 0x80 + 0x80 = 0x100
@ -59,7 +59,7 @@ __HeapBase:
.size __HeapBase, . - __HeapBase .size __HeapBase, . - __HeapBase
__HeapLimit: __HeapLimit:
.size __HeapLimit, . - __HeapLimit .size __HeapLimit, . - __HeapLimit
.section .isr_vector .section .isr_vector
.align 2 .align 2
.globl __isr_vector .globl __isr_vector
@ -128,7 +128,7 @@ __isr_vector:
.type Reset_Handler, %function .type Reset_Handler, %function
Reset_Handler: Reset_Handler:
/* Loop to copy data from read only memory to RAM. The ranges /* Loop to copy data from read only memory to RAM. The ranges
* of copy from/to are specified by following symbols evaluated in * of copy from/to are specified by following symbols evaluated in
* linker script. * linker script.
* _etext: End of code section, i.e., begin of data sections to copy from. * _etext: End of code section, i.e., begin of data sections to copy from.
* __data_start__/__data_end__: RAM address range that data should be * __data_start__/__data_end__: RAM address range that data should be
@ -153,7 +153,7 @@ Reset_Handler:
bx r0 bx r0
.pool .pool
.size Reset_Handler, . - Reset_Handler .size Reset_Handler, . - Reset_Handler
/* Macro to define default handlers. Default handler /* Macro to define default handlers. Default handler
* will be weak symbol and just dead loops. They can be * will be weak symbol and just dead loops. They can be
* overwritten by other handlers */ * overwritten by other handlers */
@ -166,7 +166,7 @@ Reset_Handler:
b . b .
.size \handler_name, . - \handler_name .size \handler_name, . - \handler_name
.endm .endm
def_default_handler NMI_Handler def_default_handler NMI_Handler
def_default_handler HardFault_Handler def_default_handler HardFault_Handler
def_default_handler MemManage_Handler def_default_handler MemManage_Handler
@ -177,7 +177,7 @@ Reset_Handler:
def_default_handler PendSV_Handler def_default_handler PendSV_Handler
def_default_handler SysTick_Handler def_default_handler SysTick_Handler
def_default_handler Default_Handler def_default_handler Default_Handler
def_default_handler WDT_IRQHandler def_default_handler WDT_IRQHandler
def_default_handler TIMER0_IRQHandler def_default_handler TIMER0_IRQHandler
def_default_handler TIMER1_IRQHandler def_default_handler TIMER1_IRQHandler

46
frameworks/CMSIS/LPC1768/driver/lpc17xx_i2c.c
View file

@ -188,7 +188,7 @@ static uint32_t I2C_SendByte (LPC_I2C_TypeDef *I2Cx, uint8_t databyte)
{ {
return CodeStatus; return CodeStatus;
} }
/* Make sure start bit is not active */ /* Make sure start bit is not active */
if (I2Cx->I2CONSET & I2C_I2CONSET_STA) if (I2Cx->I2CONSET & I2C_I2CONSET_STA)
{ {
@ -216,7 +216,7 @@ static uint32_t I2C_SendByte (LPC_I2C_TypeDef *I2Cx, uint8_t databyte)
static uint32_t I2C_GetByte (LPC_I2C_TypeDef *I2Cx, uint8_t *retdat, Bool ack) static uint32_t I2C_GetByte (LPC_I2C_TypeDef *I2Cx, uint8_t *retdat, Bool ack)
{ {
*retdat = (uint8_t) (I2Cx->I2DAT & I2C_I2DAT_BITMASK); *retdat = (uint8_t) (I2Cx->I2DAT & I2C_I2DAT_BITMASK);
if (ack == TRUE) if (ack == TRUE)
{ {
I2Cx->I2CONSET = I2C_I2CONSET_AA; I2Cx->I2CONSET = I2C_I2CONSET_AA;
@ -227,7 +227,7 @@ static uint32_t I2C_GetByte (LPC_I2C_TypeDef *I2Cx, uint8_t *retdat, Bool ack)
} }
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC; I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
return (I2Cx->I2STAT & I2C_STAT_CODE_BITMASK); return (I2Cx->I2STAT & I2C_STAT_CODE_BITMASK);
} }
@ -454,7 +454,7 @@ int32_t I2C_MasterHanleStates(LPC_I2C_TypeDef *I2Cx, uint32_t CodeStatus, I2C_M
uint8_t *rxdat; uint8_t *rxdat;
uint8_t tmp; uint8_t tmp;
int32_t Ret = I2C_OK; int32_t Ret = I2C_OK;
//get buffer to send/receive //get buffer to send/receive
txdat = (uint8_t *) &TransferCfg->tx_data[TransferCfg->tx_count]; txdat = (uint8_t *) &TransferCfg->tx_data[TransferCfg->tx_count];
rxdat = (uint8_t *) &TransferCfg->rx_data[TransferCfg->rx_count]; rxdat = (uint8_t *) &TransferCfg->rx_data[TransferCfg->rx_count];
@ -481,11 +481,11 @@ int32_t I2C_MasterHanleStates(LPC_I2C_TypeDef *I2Cx, uint32_t CodeStatus, I2C_M
break; break;
case I2C_I2STAT_M_TX_SLAW_ACK: case I2C_I2STAT_M_TX_SLAW_ACK:
case I2C_I2STAT_M_TX_DAT_ACK: case I2C_I2STAT_M_TX_DAT_ACK:
if(TransferCfg->tx_count < TransferCfg->tx_length) if(TransferCfg->tx_count < TransferCfg->tx_length)
{ {
I2C_SendByte(I2Cx, *txdat); I2C_SendByte(I2Cx, *txdat);
txdat++; txdat++;
TransferCfg->tx_count++; TransferCfg->tx_count++;
@ -497,7 +497,7 @@ int32_t I2C_MasterHanleStates(LPC_I2C_TypeDef *I2Cx, uint32_t CodeStatus, I2C_M
I2C_Stop(I2Cx); I2C_Stop(I2Cx);
Ret = I2C_SEND_END; Ret = I2C_SEND_END;
} }
break; break;
case I2C_I2STAT_M_TX_DAT_NACK: case I2C_I2STAT_M_TX_DAT_NACK:
@ -537,7 +537,7 @@ int32_t I2C_MasterHanleStates(LPC_I2C_TypeDef *I2Cx, uint32_t CodeStatus, I2C_M
{ {
Ret = I2C_RECV_END; Ret = I2C_RECV_END;
} }
break; break;
case I2C_I2STAT_M_RX_DAT_NACK: case I2C_I2STAT_M_RX_DAT_NACK:
I2C_GetByte(I2Cx, &tmp, FALSE); I2C_GetByte(I2Cx, &tmp, FALSE);
@ -559,7 +559,7 @@ int32_t I2C_MasterHanleStates(LPC_I2C_TypeDef *I2Cx, uint32_t CodeStatus, I2C_M
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC; I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
break; break;
} }
return Ret; return Ret;
} }
@ -592,7 +592,7 @@ int32_t I2C_SlaveHanleStates(LPC_I2C_TypeDef *I2Cx, uint32_t CodeStatus, I2C_S_
//get buffer to send/receive //get buffer to send/receive
txdat = (uint8_t *) &TransferCfg->tx_data[TransferCfg->tx_count]; txdat = (uint8_t *) &TransferCfg->tx_data[TransferCfg->tx_count];
rxdat = (uint8_t *) &TransferCfg->rx_data[TransferCfg->rx_count]; rxdat = (uint8_t *) &TransferCfg->rx_data[TransferCfg->rx_count];
switch (CodeStatus) switch (CodeStatus)
{ {
/* Reading phase -------------------------------------------------------- */ /* Reading phase -------------------------------------------------------- */
@ -636,7 +636,7 @@ int32_t I2C_SlaveHanleStates(LPC_I2C_TypeDef *I2Cx, uint32_t CodeStatus, I2C_S_
I2Cx->I2CONSET = I2C_I2CONSET_AA; I2Cx->I2CONSET = I2C_I2CONSET_AA;
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC; I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
} }
break; break;
/* DATA has been received, Only the first data byte will be received with ACK. Additional /* DATA has been received, Only the first data byte will be received with ACK. Additional
data will be received with NOT ACK. */ data will be received with NOT ACK. */
@ -688,7 +688,7 @@ int32_t I2C_SlaveHanleStates(LPC_I2C_TypeDef *I2Cx, uint32_t CodeStatus, I2C_S_
I2Cx->I2CONSET = I2C_I2CONSET_AA|I2C_I2CONSET_STA; I2Cx->I2CONSET = I2C_I2CONSET_AA|I2C_I2CONSET_STA;
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC; I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
break; break;
case I2C_I2STAT_S_TX_LAST_DAT_ACK: case I2C_I2STAT_S_TX_LAST_DAT_ACK:
/* Data has been transmitted, NACK has been received, /* Data has been transmitted, NACK has been received,
* that means there's no more data to send, exit now */ * that means there's no more data to send, exit now */
@ -729,7 +729,7 @@ int32_t I2C_SlaveHanleStates(LPC_I2C_TypeDef *I2Cx, uint32_t CodeStatus, I2C_S_
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC; I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
Ret = I2C_STA_STO_RECV; Ret = I2C_STA_STO_RECV;
break; break;
/* No status information */ /* No status information */
case I2C_I2STAT_NO_INF: case I2C_I2STAT_NO_INF:
/* Other status must be captured */ /* Other status must be captured */
@ -737,7 +737,7 @@ int32_t I2C_SlaveHanleStates(LPC_I2C_TypeDef *I2Cx, uint32_t CodeStatus, I2C_S_
I2Cx->I2CONSET = I2C_I2CONSET_AA; I2Cx->I2CONSET = I2C_I2CONSET_AA;
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC; I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
break; break;
} }
return Ret; return Ret;
@ -787,7 +787,7 @@ void I2C_MasterHandler(LPC_I2C_TypeDef *I2Cx)
else if (Ret & I2C_SEND_END) else if (Ret & I2C_SEND_END)
{ {
// If no need to wait for data from Slave // If no need to wait for data from Slave
if(txrx_setup->rx_count >= (txrx_setup->rx_length)) if(txrx_setup->rx_count >= (txrx_setup->rx_length))
{ {
goto s_int_end; goto s_int_end;
} }
@ -799,7 +799,7 @@ void I2C_MasterHandler(LPC_I2C_TypeDef *I2Cx)
return; return;
} }
} }
else if (Ret & I2C_RECV_END) else if (Ret & I2C_RECV_END)
{ {
goto s_int_end; goto s_int_end;
} }
@ -815,7 +815,7 @@ s_int_end:
I2Cx->I2CONCLR = I2C_I2CONCLR_AAC | I2C_I2CONCLR_SIC | I2C_I2CONCLR_STAC; I2Cx->I2CONCLR = I2C_I2CONCLR_AAC | I2C_I2CONCLR_SIC | I2C_I2CONCLR_STAC;
I2C_MasterComplete[i2cId] = TRUE; I2C_MasterComplete[i2cId] = TRUE;
} }
@ -874,7 +874,7 @@ handle_state:
goto s_int_end; goto s_int_end;
} }
} }
} }
} }
else if(Ret &I2C_SEND_END) else if(Ret &I2C_SEND_END)
{ {
@ -937,7 +937,7 @@ retry:
// Start command // Start command
CodeStatus = I2C_Start(I2Cx); CodeStatus = I2C_Start(I2Cx);
while(1) // send data first and then receive data from Slave. while(1) // send data first and then receive data from Slave.
{ {
Ret = I2C_MasterHanleStates(I2Cx, CodeStatus, TransferCfg); Ret = I2C_MasterHanleStates(I2Cx, CodeStatus, TransferCfg);
@ -955,13 +955,13 @@ retry:
else if( (Ret & I2C_BYTE_SENT) || else if( (Ret & I2C_BYTE_SENT) ||
(Ret & I2C_BYTE_RECV)) (Ret & I2C_BYTE_RECV))
{ {
// Wait for sending ends // Wait for sending ends
while (!(I2Cx->I2CONSET & I2C_I2CONSET_SI)); while (!(I2Cx->I2CONSET & I2C_I2CONSET_SI));
} }
else if (Ret & I2C_SEND_END) // already send all data else if (Ret & I2C_SEND_END) // already send all data
{ {
// If no need to wait for data from Slave // If no need to wait for data from Slave
if(TransferCfg->rx_count >= (TransferCfg->rx_length)) if(TransferCfg->rx_count >= (TransferCfg->rx_length))
{ {
break; break;
} }
@ -1037,7 +1037,7 @@ Status I2C_SlaveTransferData(LPC_I2C_TypeDef *I2Cx, I2C_S_SETUP_Type *TransferCf
I2C_TRANSFER_OPT_Type Opt) I2C_TRANSFER_OPT_Type Opt)
{ {
int32_t Ret = I2C_OK; int32_t Ret = I2C_OK;
uint32_t CodeStatus; uint32_t CodeStatus;
uint32_t timeout; uint32_t timeout;
int32_t time_en; int32_t time_en;
@ -1052,7 +1052,7 @@ Status I2C_SlaveTransferData(LPC_I2C_TypeDef *I2Cx, I2C_S_SETUP_Type *TransferCf
{ {
/* Set AA bit to ACK command on I2C bus */ /* Set AA bit to ACK command on I2C bus */
I2Cx->I2CONSET = I2C_I2CONSET_AA; I2Cx->I2CONSET = I2C_I2CONSET_AA;
/* Clear SI bit to be ready ... */ /* Clear SI bit to be ready ... */
I2Cx->I2CONCLR = (I2C_I2CONCLR_SIC | I2C_I2CONCLR_STAC|I2C_I2CONCLR_STOC); I2Cx->I2CONCLR = (I2C_I2CONCLR_SIC | I2C_I2CONCLR_STAC|I2C_I2CONCLR_STOC);

4
frameworks/CMSIS/LPC1768/driver/lpc17xx_i2s.c
View file

@ -331,7 +331,7 @@ Status I2S_FreqConfig(LPC_I2S_TypeDef *I2Sx, uint32_t Freq, uint8_t TRMode) {
uint16_t dif; uint16_t dif;
uint16_t x_divide, y_divide; uint16_t x_divide, y_divide;
uint16_t err, ErrorOptimal = 0xFFFF; uint16_t err, ErrorOptimal = 0xFFFF;
uint32_t N; uint32_t N;
CHECK_PARAM(PARAM_I2Sx(I2Sx)); CHECK_PARAM(PARAM_I2Sx(I2Sx));
@ -360,7 +360,7 @@ Status I2S_FreqConfig(LPC_I2S_TypeDef *I2Sx, uint32_t Freq, uint8_t TRMode) {
* The formula is: * The formula is:
* I2S_MCLK = PCLK_I2S * (X/Y) / 2 * I2S_MCLK = PCLK_I2S * (X/Y) / 2
* In that, Y must be greater than or equal to X. X should divides evenly * In that, Y must be greater than or equal to X. X should divides evenly
* into Y. * into Y.
* We have: * We have:
* I2S_MCLK = Freq * channel*wordwidth * (I2STXBITRATE+1); * I2S_MCLK = Freq * channel*wordwidth * (I2STXBITRATE+1);
* So: (X/Y) = (Freq * channel*wordwidth * (I2STXBITRATE+1))*2/PCLK_I2S * So: (X/Y) = (Freq * channel*wordwidth * (I2STXBITRATE+1))*2/PCLK_I2S

64
frameworks/CMSIS/LPC1768/include/arm_common_tables.h
View file

@ -1,35 +1,35 @@
/* ---------------------------------------------------------------------- /* ----------------------------------------------------------------------
* Copyright (C) 2010 ARM Limited. All rights reserved. * Copyright (C) 2010 ARM Limited. All rights reserved.
* *
* $Date: 11. November 2010 * $Date: 11. November 2010
* $Revision: V1.0.2 * $Revision: V1.0.2
* *
* Project: CMSIS DSP Library * Project: CMSIS DSP Library
* Title: arm_common_tables.h * Title: arm_common_tables.h
* *
* Description: This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions * Description: This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions
* *
* Target Processor: Cortex-M4/Cortex-M3 * Target Processor: Cortex-M4/Cortex-M3
* *
* Version 1.0.2 2010/11/11 * Version 1.0.2 2010/11/11
* Documentation updated. * Documentation updated.
* *
* Version 1.0.1 2010/10/05 * Version 1.0.1 2010/10/05
* Production release and review comments incorporated. * Production release and review comments incorporated.
* *
* Version 1.0.0 2010/09/20 * Version 1.0.0 2010/09/20
* Production release and review comments incorporated. * Production release and review comments incorporated.
* -------------------------------------------------------------------- */ * -------------------------------------------------------------------- */
#ifndef _ARM_COMMON_TABLES_H #ifndef _ARM_COMMON_TABLES_H
#define _ARM_COMMON_TABLES_H #define _ARM_COMMON_TABLES_H
#include "arm_math.h" #include "arm_math.h"
extern uint16_t armBitRevTable[256]; extern uint16_t armBitRevTable[256];
extern q15_t armRecipTableQ15[64]; extern q15_t armRecipTableQ15[64];
extern q31_t armRecipTableQ31[64]; extern q31_t armRecipTableQ31[64];
extern const q31_t realCoefAQ31[1024]; extern const q31_t realCoefAQ31[1024];
extern const q31_t realCoefBQ31[1024]; extern const q31_t realCoefBQ31[1024];
#endif /* ARM_COMMON_TABLES_H */ #endif /* ARM_COMMON_TABLES_H */

22
frameworks/CMSIS/LPC1768/include/core_cmFunc.h
View file

@ -8,9 +8,9 @@
* Copyright (C) 2009-2011 ARM Limited. All rights reserved. * Copyright (C) 2009-2011 ARM Limited. All rights reserved.
* *
* @par * @par
* ARM Limited (ARM) is supplying this software for use with Cortex-M * ARM Limited (ARM) is supplying this software for use with Cortex-M
* processor based microcontrollers. This file can be freely distributed * processor based microcontrollers. This file can be freely distributed
* within development tools that are supporting such ARM based processors. * within development tools that are supporting such ARM based processors.
* *
* @par * @par
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
@ -26,7 +26,7 @@
/* ########################### Core Function Access ########################### */ /* ########################### Core Function Access ########################### */
/** \ingroup CMSIS_Core_FunctionInterface /** \ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
@{ @{
*/ */
@ -182,7 +182,7 @@ static __INLINE void __set_PRIMASK(uint32_t priMask)
register uint32_t __regPriMask __ASM("primask"); register uint32_t __regPriMask __ASM("primask");
__regPriMask = (priMask); __regPriMask = (priMask);
} }
#if (__CORTEX_M >= 0x03) #if (__CORTEX_M >= 0x03)
@ -226,7 +226,7 @@ static __INLINE void __set_BASEPRI(uint32_t basePri)
register uint32_t __regBasePri __ASM("basepri"); register uint32_t __regBasePri __ASM("basepri");
__regBasePri = (basePri & 0xff); __regBasePri = (basePri & 0xff);
} }
/** \brief Get Fault Mask /** \brief Get Fault Mask
@ -407,7 +407,7 @@ __attribute__( ( always_inline ) ) static __INLINE uint32_t __get_PSP(void)
__ASM volatile ("MRS %0, psp\n" : "=r" (result) ); __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
return(result); return(result);
} }
/** \brief Set Process Stack Pointer /** \brief Set Process Stack Pointer
@ -434,7 +434,7 @@ __attribute__( ( always_inline ) ) static __INLINE uint32_t __get_MSP(void)
__ASM volatile ("MRS %0, msp\n" : "=r" (result) ); __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
return(result); return(result);
} }
/** \brief Set Main Stack Pointer /** \brief Set Main Stack Pointer
@ -473,7 +473,7 @@ __attribute__( ( always_inline ) ) static __INLINE void __set_PRIMASK(uint32_t p
{ {
__ASM volatile ("MSR primask, %0" : : "r" (priMask) ); __ASM volatile ("MSR primask, %0" : : "r" (priMask) );
} }
#if (__CORTEX_M >= 0x03) #if (__CORTEX_M >= 0x03)
@ -508,7 +508,7 @@ __attribute__( ( always_inline ) ) static __INLINE void __disable_fault_irq(void
__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_BASEPRI(void) __attribute__( ( always_inline ) ) static __INLINE uint32_t __get_BASEPRI(void)
{ {
uint32_t result; uint32_t result;
__ASM volatile ("MRS %0, basepri_max" : "=r" (result) ); __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
return(result); return(result);
} }
@ -535,7 +535,7 @@ __attribute__( ( always_inline ) ) static __INLINE void __set_BASEPRI(uint32_t v
__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_FAULTMASK(void) __attribute__( ( always_inline ) ) static __INLINE uint32_t __get_FAULTMASK(void)
{ {
uint32_t result; uint32_t result;
__ASM volatile ("MRS %0, faultmask" : "=r" (result) ); __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
return(result); return(result);
} }

6
frameworks/CMSIS/LPC1768/include/lpc17xx_iap.h
View file

@ -7,7 +7,7 @@
* @version 1.0 * @version 1.0
* @date 18. April. 2012 * @date 18. April. 2012
* @author NXP MCU SW Application Team * @author NXP MCU SW Application Team
* *
* Copyright(C) 2011, NXP Semiconductor * Copyright(C) 2011, NXP Semiconductor
* All rights reserved. * All rights reserved.
* *
@ -112,7 +112,7 @@ typedef struct {
/** /**
* @} * @}
*/ */
/* Public Functions ----------------------------------------------------------- */ /* Public Functions ----------------------------------------------------------- */
/** @defgroup IAP_Public_Functions IAP Public Functions /** @defgroup IAP_Public_Functions IAP Public Functions
* @{ * @{
@ -128,7 +128,7 @@ IAP_STATUS_CODE CopyRAM2Flash(uint8_t * dest, uint8_t* source, IAP_WRITE_SIZE si
IAP_STATUS_CODE EraseSector(uint32_t start_sec, uint32_t end_sec); IAP_STATUS_CODE EraseSector(uint32_t start_sec, uint32_t end_sec);
/** Blank check sectors */ /** Blank check sectors */
IAP_STATUS_CODE BlankCheckSector(uint32_t start_sec, uint32_t end_sec, IAP_STATUS_CODE BlankCheckSector(uint32_t start_sec, uint32_t end_sec,
uint32_t *first_nblank_loc, uint32_t *first_nblank_loc,
uint32_t *first_nblank_val); uint32_t *first_nblank_val);
/** Read part identification number */ /** Read part identification number */
IAP_STATUS_CODE ReadPartID(uint32_t *partID); IAP_STATUS_CODE ReadPartID(uint32_t *partID);

12
frameworks/CMSIS/LPC1768/include/system_LPC17xx.h
View file

@ -1,16 +1,16 @@
/****************************************************************************** /******************************************************************************
* @file: system_LPC17xx.h * @file: system_LPC17xx.h
* @purpose: CMSIS Cortex-M3 Device Peripheral Access Layer Header File * @purpose: CMSIS Cortex-M3 Device Peripheral Access Layer Header File
* for the NXP LPC17xx Device Series * for the NXP LPC17xx Device Series
* @version: V1.02 * @version: V1.02
* @date: 27. July 2009 * @date: 27. July 2009
*---------------------------------------------------------------------------- *----------------------------------------------------------------------------
* *
* Copyright (C) 2009 ARM Limited. All rights reserved. * Copyright (C) 2009 ARM Limited. All rights reserved.
* *
* ARM Limited (ARM) is supplying this software for use with Cortex-M3 * ARM Limited (ARM) is supplying this software for use with Cortex-M3
* processor based microcontrollers. This file can be freely distributed * processor based microcontrollers. This file can be freely distributed
* within development tools that are supporting such ARM based processors. * within development tools that are supporting such ARM based processors.
* *
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
* OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
@ -26,7 +26,7 @@
#ifdef __cplusplus #ifdef __cplusplus
extern "C" { extern "C" {
#endif #endif
extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
@ -48,7 +48,7 @@ extern void SystemInit (void);
* @param none * @param none
* @return none * @return none
* *
* @brief Updates the SystemCoreClock with current core Clock * @brief Updates the SystemCoreClock with current core Clock
* retrieved from cpu registers. * retrieved from cpu registers.
*/ */
extern void SystemCoreClockUpdate (void); extern void SystemCoreClockUpdate (void);

6
frameworks/CMSIS/library.json
View file

@ -1,9 +1,9 @@
{ {
"name": "CMSIS-LPC1768", "name": "CMSIS-LPC1768",
"version": "0.0.0", "version": "0.0.0",
"frameworks": [], "frameworks": [],
"platforms": [ "platforms": [
"nxplpc", "nxplpc",
"ststm32" "ststm32"
], ],
"description": "CMSIS library for LPC1768", "description": "CMSIS library for LPC1768",