zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Other spacing tweaks

Browse source
This commit is contained in:
Scott Lahteine 2017-08-24 12:19:06 -05:00
parent 2af62a5d8d
commit a037ddbf7b
3 changed files with 23 additions and 23 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

8
Marlin/dac_dac084s085.cpp
View file

@ -17,10 +17,10 @@
uint8_t externalDac_buf[2] = {0x20,0x00};//all off uint8_t externalDac_buf[2] = {0x20,0x00};//all off
// All SPI chip-select HIGH // All SPI chip-select HIGH
pinMode (DAC0_SYNC, OUTPUT); pinMode(DAC0_SYNC, OUTPUT);
digitalWrite( DAC0_SYNC , HIGH ); digitalWrite( DAC0_SYNC , HIGH );
#if EXTRUDERS > 1 #if EXTRUDERS > 1
pinMode (DAC1_SYNC, OUTPUT); pinMode(DAC1_SYNC, OUTPUT);
digitalWrite( DAC1_SYNC , HIGH ); digitalWrite( DAC1_SYNC , HIGH );
#endif #endif
digitalWrite( SPI_EEPROM1_CS , HIGH ); digitalWrite( SPI_EEPROM1_CS , HIGH );
@ -68,8 +68,8 @@
else else
externalDac_buf[0] |= (3 - channel << 6); externalDac_buf[0] |= (3 - channel << 6);
externalDac_buf[0] |= (value>>4); externalDac_buf[0] |= (value >> 4);
externalDac_buf[1] |= (value<<4); externalDac_buf[1] |= (value << 4);
// All SPI chip-select HIGH // All SPI chip-select HIGH
digitalWrite( DAC0_SYNC , HIGH ); digitalWrite( DAC0_SYNC , HIGH );

36
Marlin/stepper.cpp
View file

@ -1136,27 +1136,27 @@ void Stepper::init() {
E_AXIS_INIT(4); E_AXIS_INIT(4);
#endif #endif
#ifdef ARDUINO_ARCH_AVR #ifdef ARDUINO_ARCH_AVR
// waveform generation = 0100 = CTC // waveform generation = 0100 = CTC
SET_WGM(1, CTC_OCRnA); SET_WGM(1, CTC_OCRnA);
// output mode = 00 (disconnected) // output mode = 00 (disconnected)
SET_COMA(1, NORMAL); SET_COMA(1, NORMAL);
// Set the timer pre-scaler // Set the timer pre-scaler
// Generally we use a divider of 8, resulting in a 2MHz timer // Generally we use a divider of 8, resulting in a 2MHz timer
// frequency on a 16MHz MCU. If you are going to change this, be // frequency on a 16MHz MCU. If you are going to change this, be
// sure to regenerate speed_lookuptable.h with // sure to regenerate speed_lookuptable.h with
// create_speed_lookuptable.py // create_speed_lookuptable.py
SET_CS(1, PRESCALER_8); // CS 2 = 1/8 prescaler SET_CS(1, PRESCALER_8); // CS 2 = 1/8 prescaler
// Init Stepper ISR to 122 Hz for quick starting // Init Stepper ISR to 122 Hz for quick starting
OCR1A = 0x4000; OCR1A = 0x4000;
TCNT1 = 0; TCNT1 = 0;
#else #else
// Init Stepper ISR to 122 Hz for quick starting // Init Stepper ISR to 122 Hz for quick starting
HAL_timer_start(STEP_TIMER_NUM, 122); HAL_timer_start(STEP_TIMER_NUM, 122);
#endif #endif
ENABLE_STEPPER_DRIVER_INTERRUPT(); ENABLE_STEPPER_DRIVER_INTERRUPT();

2
Marlin/twibus.cpp
View file

@ -94,7 +94,7 @@ void TWIBus::echoprefix(uint8_t bytes, const char prefix[], uint8_t adr) {
serialprintPGM(prefix); serialprintPGM(prefix);
SERIAL_ECHOPAIR(": from:", adr); SERIAL_ECHOPAIR(": from:", adr);
SERIAL_ECHOPAIR(" bytes:", bytes); SERIAL_ECHOPAIR(" bytes:", bytes);
SERIAL_ECHOPGM (" data:"); SERIAL_ECHOPGM(" data:");
} }
// static // static