zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

G0 feedrate may be fixed or variable (#12172)

Browse source
This commit is contained in:
TheSFReader 2018-10-25 17:35:16 +02:00 committed by Scott Lahteine
parent 53c535a0c1
commit a07ac6312f
61 changed files with 319 additions and 199 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

8
Marlin/Configuration_adv.h
View file

@ -1614,9 +1614,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/default/Configuration_adv.h
View file

@ -1614,9 +1614,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Anet/A2/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Anet/A6/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Anet/A8/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/ArmEd/Configuration_adv.h
View file

@ -1619,9 +1619,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

9
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -1621,11 +1621,12 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
#endif
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**
* User-defined menu items that execute custom GCode
*/

8
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Cartesio/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
View file

@ -1616,9 +1616,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Einstart-S/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Felix/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
View file

@ -1615,9 +1615,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
View file

@ -1617,9 +1617,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
View file

@ -1618,9 +1618,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/MakerParts/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
View file

@ -1621,9 +1621,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/RigidBot/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/SCARA/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/TheBorg/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
View file

@ -1626,9 +1626,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
View file

@ -1615,9 +1615,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
View file

@ -1615,9 +1615,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
View file

@ -1615,9 +1615,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
View file

@ -1615,9 +1615,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
View file

@ -1615,9 +1615,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/delta/generic/Configuration_adv.h
View file

@ -1615,9 +1615,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
View file

@ -1615,9 +1615,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
View file

@ -1615,9 +1615,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/makibox/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
View file

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/wt150/Configuration_adv.h
View file

@ -1614,9 +1614,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

2
Marlin/src/gcode/gcode.cpp
View file

@ -184,7 +184,7 @@ void GcodeSuite::process_parsed_command(
case 'G': switch (parser.codenum) {
case 0: case 1: G0_G1( // G0: Fast Move, G1: Linear Move
#if IS_SCARA || ENABLED(G0_FEEDRATE)
#if IS_SCARA || defined(G0_FEEDRATE)
parser.codenum == 0
#endif
);

2
Marlin/src/gcode/gcode.h
View file

@ -342,7 +342,7 @@ public:
private:
static void G0_G1(
#if IS_SCARA || ENABLED(G0_FEEDRATE)
#if IS_SCARA || defined(G0_FEEDRATE)
bool fast_move=false
#endif
);

55
Marlin/src/gcode/motion/G0_G1.cpp
View file

@ -37,40 +37,48 @@
extern float destination[XYZE];
#if ENABLED(G0_FEEDRATE)
float saved_g0_feedrate_mm_s = MMM_TO_MMS(DEFAULT_G0_FEEDRATE);
#endif
#if ENABLED(NO_MOTION_BEFORE_HOMING)
#define G0_G1_CONDITION !axis_unhomed_error(parser.seen('X'), parser.seen('Y'), parser.seen('Z'))
#else
#define G0_G1_CONDITION true
#if ENABLED(VARIABLE_G0_FEEDRATE)
float saved_g0_feedrate_mm_s = MMM_TO_MMS(G0_FEEDRATE);
#endif
/**
* G0, G1: Coordinated movement of X Y Z E axes
*/
void GcodeSuite::G0_G1(
#if IS_SCARA || ENABLED(G0_FEEDRATE)
#if IS_SCARA || defined(G0_FEEDRATE)
bool fast_move/*=false*/
#endif
) {
#if ENABLED(G0_FEEDRATE)
float saved_g1_feedrate_mm_s;
#endif
if (IsRunning() && G0_G1_CONDITION) {
if (IsRunning()
#if ENABLED(NO_MOTION_BEFORE_HOMING)
&& !axis_unhomed_error(parser.seen('X'), parser.seen('Y'), parser.seen('Z'))
#endif
) {
#if ENABLED(G0_FEEDRATE)
if (fast_move) {
// Save standard feedrate before setting feedrate to fast/g0
saved_g1_feedrate_mm_s = feedrate_mm_s;
feedrate_mm_s = saved_g0_feedrate_mm_s;
}
#ifdef G0_FEEDRATE
float saved_feedrate_mm_s;
#if ENABLED(VARIABLE_G0_FEEDRATE)
if (fast_move) {
saved_feedrate_mm_s = feedrate_mm_s; // Back up the (old) motion mode feedrate
feedrate_mm_s = saved_g0_feedrate_mm_s; // Get G0 feedrate from last usage
}
#endif
#endif
get_destination_from_command(); // For X Y Z E F
#ifdef G0_FEEDRATE
if (fast_move) {
#if ENABLED(VARIABLE_G0_FEEDRATE)
saved_g0_feedrate_mm_s = feedrate_mm_s; // Save feedrate for the next G0
#else
saved_feedrate_mm_s = feedrate_mm_s; // Back up the (new) motion mode feedrate
feedrate_mm_s = MMM_TO_MMS(G0_FEEDRATE); // Get the fixed G0 feedrate
#endif
}
#endif
#if ENABLED(FWRETRACT) && ENABLED(FWRETRACT_AUTORETRACT)
if (MIN_AUTORETRACT <= MAX_AUTORETRACT) {
@ -94,12 +102,9 @@ void GcodeSuite::G0_G1(
prepare_move_to_destination();
#endif
#if ENABLED(G0_FEEDRATE)
// save G0 feedrate, and restore standard feedrate as soon as possible
if (fast_move) {
saved_g0_feedrate_mm_s = feedrate_mm_s;
feedrate_mm_s = saved_g1_feedrate_mm_s;
}
#ifdef G0_FEEDRATE
// Restore the motion mode feedrate
if (fast_move) feedrate_mm_s = saved_feedrate_mm_s;
#endif
#if ENABLED(NANODLP_Z_SYNC)

2
Marlin/src/inc/SanityCheck.h
View file

@ -319,6 +319,8 @@
#error "PARKING_EXTRUDER_SECURITY_RAISE is now TOOLCHANGE_ZRAISE. Please update your configuration."
#elif defined(SWITCHING_TOOLHEAD_SECURITY_RAISE)
#error "SWITCHING_TOOLHEAD_SECURITY_RAISE is now TOOLCHANGE_ZRAISE. Please update your configuration."
#elif defined(G0_FEEDRATE) && G0_FEEDRATE == 0
#error "G0_FEEDRATE is now used to set the G0 feedrate. Please update your configuration."
#endif
#define BOARD_MKS_13 -47