M42 P1.20 fix
This commit is contained in:
Bob-the-Kuhn
Scott Lahteine
parent
5060195e8a
commit
a28ccabe2a
|
|
@ -174,12 +174,12 @@ uint16_t HAL_adc_get_result(void) {
|
|||
#define SBIT_PWMEN 2
|
||||
#define SBIT_PWMMR0R 1
|
||||
|
||||
#define PWM_1 0 //P2_0 (0-1 Bits of PINSEL4)
|
||||
#define PWM_2 2 //P2_1 (2-3 Bits of PINSEL4)
|
||||
#define PWM_3 4 //P2_2 (4-5 Bits of PINSEL4)
|
||||
#define PWM_4 6 //P2_3 (6-7 Bits of PINSEL4)
|
||||
#define PWM_5 8 //P2_4 (8-9 Bits of PINSEL4)
|
||||
#define PWM_6 10 //P2_5 (10-11 Bits of PINSEL4)
|
||||
#define PWM_1 0 //P2_00 (0-1 Bits of PINSEL4)
|
||||
#define PWM_2 2 //P2_01 (2-3 Bits of PINSEL4)
|
||||
#define PWM_3 4 //P2_02 (4-5 Bits of PINSEL4)
|
||||
#define PWM_4 6 //P2_03 (6-7 Bits of PINSEL4)
|
||||
#define PWM_5 8 //P2_04 (8-9 Bits of PINSEL4)
|
||||
#define PWM_6 10 //P2_05 (10-11 Bits of PINSEL4)
|
||||
|
||||
void HAL_pwm_init(void) {
|
||||
LPC_PINCON->PINSEL4 = _BV(PWM_5) | _BV(PWM_6);
|
||||
|
|
@ -193,7 +193,7 @@ void HAL_pwm_init(void) {
|
|||
|
||||
// Trigger the latch Enable Bits to load the new Match Values MR0, MR5, MR6
|
||||
LPC_PWM1->LER = _BV(0) | _BV(5) | _BV(6);
|
||||
// Enable the PWM output pins for PWM_5-PWM_6(P2_4 - P2_5)
|
||||
// Enable the PWM output pins for PWM_5-PWM_6(P2_04 - P2_05)
|
||||
LPC_PWM1->PCR = _BV(13) | _BV(14);
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -35,15 +35,18 @@ int16_t GET_PIN_MAP_INDEX(pin_t pin) {
|
|||
return -1;
|
||||
}
|
||||
|
||||
int16_t PARSED_PIN_INDEX(char code, int16_t dval) {
|
||||
int16_t PARSED_PIN_INDEX(char code, int16_t dval) { // treats 1.2 and 1.20 as the same thing
|
||||
if (parser.seenval(code)) {
|
||||
int port, pin;
|
||||
if (sscanf(parser.strval(code), "%d.%d", &port, &pin) == 2)
|
||||
char pin_string[3] = {" "};
|
||||
if (sscanf(parser.strval(code), "%d.%2s", &port, pin_string) == 2) {
|
||||
if (pin_string[1] == '\0') pin_string[1] = '0'; // add trailing zero if a null is found
|
||||
pin = (10 * (pin_string[0] - '0')) + (pin_string[1] - '0'); // convert string to number
|
||||
for (size_t i = 0; i < NUM_DIGITAL_PINS; ++i)
|
||||
if (LPC1768_PIN_PORT(pin_map[i]) == port && LPC1768_PIN_PIN(pin_map[i]) == pin)
|
||||
return i;
|
||||
}
|
||||
|
||||
}
|
||||
return dval;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -109,19 +109,19 @@ constexpr int8_t LPC1768_PIN_ADC(const pin_t pin) { return (int8_t)((pin >> 10)
|
|||
#define P_NC -1
|
||||
|
||||
#if SERIAL_PORT != 3
|
||||
#define P0_0 LPC1768_PIN(PORT(0), PIN(0), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P0_1 LPC1768_PIN(PORT(0), PIN(1), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P0_00 LPC1768_PIN(PORT(0), PIN(0), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P0_01 LPC1768_PIN(PORT(0), PIN(1), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#endif
|
||||
#if SERIAL_PORT != 0
|
||||
#define P0_2 LPC1768_PIN(PORT(0), PIN(2), INTERRUPT(1), PWM(0), ADC_CHAN(7))
|
||||
#define P0_3 LPC1768_PIN(PORT(0), PIN(3), INTERRUPT(1), PWM(0), ADC_CHAN(6))
|
||||
#define P0_02 LPC1768_PIN(PORT(0), PIN(2), INTERRUPT(1), PWM(0), ADC_CHAN(7))
|
||||
#define P0_03 LPC1768_PIN(PORT(0), PIN(3), INTERRUPT(1), PWM(0), ADC_CHAN(6))
|
||||
#endif
|
||||
#define P0_4 LPC1768_PIN(PORT(0), PIN(4), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P0_5 LPC1768_PIN(PORT(0), PIN(5), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P0_6 LPC1768_PIN(PORT(0), PIN(6), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P0_7 LPC1768_PIN(PORT(0), PIN(7), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P0_8 LPC1768_PIN(PORT(0), PIN(8), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P0_9 LPC1768_PIN(PORT(0), PIN(9), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P0_04 LPC1768_PIN(PORT(0), PIN(4), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P0_05 LPC1768_PIN(PORT(0), PIN(5), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P0_06 LPC1768_PIN(PORT(0), PIN(6), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P0_07 LPC1768_PIN(PORT(0), PIN(7), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P0_08 LPC1768_PIN(PORT(0), PIN(8), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P0_09 LPC1768_PIN(PORT(0), PIN(9), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#if SERIAL_PORT != 2
|
||||
#define P0_10 LPC1768_PIN(PORT(0), PIN(10), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P0_11 LPC1768_PIN(PORT(0), PIN(11), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
|
|
@ -144,11 +144,11 @@ constexpr int8_t LPC1768_PIN_ADC(const pin_t pin) { return (int8_t)((pin >> 10)
|
|||
#define P0_28 LPC1768_PIN(PORT(0), PIN(28), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P0_29 LPC1768_PIN(PORT(0), PIN(29), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P0_30 LPC1768_PIN(PORT(0), PIN(30), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P1_0 LPC1768_PIN(PORT(1), PIN(0), INTERRUPT(0), PWM(0), ADC_NONE)
|
||||
#define P1_1 LPC1768_PIN(PORT(1), PIN(1), INTERRUPT(0), PWM(0), ADC_NONE)
|
||||
#define P1_4 LPC1768_PIN(PORT(1), PIN(4), INTERRUPT(0), PWM(0), ADC_NONE)
|
||||
#define P1_8 LPC1768_PIN(PORT(1), PIN(8), INTERRUPT(0), PWM(0), ADC_NONE)
|
||||
#define P1_9 LPC1768_PIN(PORT(1), PIN(9), INTERRUPT(0), PWM(0), ADC_NONE)
|
||||
#define P1_00 LPC1768_PIN(PORT(1), PIN(0), INTERRUPT(0), PWM(0), ADC_NONE)
|
||||
#define P1_01 LPC1768_PIN(PORT(1), PIN(1), INTERRUPT(0), PWM(0), ADC_NONE)
|
||||
#define P1_04 LPC1768_PIN(PORT(1), PIN(4), INTERRUPT(0), PWM(0), ADC_NONE)
|
||||
#define P1_08 LPC1768_PIN(PORT(1), PIN(8), INTERRUPT(0), PWM(0), ADC_NONE)
|
||||
#define P1_09 LPC1768_PIN(PORT(1), PIN(9), INTERRUPT(0), PWM(0), ADC_NONE)
|
||||
#define P1_10 LPC1768_PIN(PORT(1), PIN(10), INTERRUPT(0), PWM(0), ADC_NONE)
|
||||
#define P1_14 LPC1768_PIN(PORT(1), PIN(14), INTERRUPT(0), PWM(0), ADC_NONE)
|
||||
#define P1_15 LPC1768_PIN(PORT(1), PIN(15), INTERRUPT(0), PWM(0), ADC_NONE)
|
||||
|
|
@ -168,16 +168,16 @@ constexpr int8_t LPC1768_PIN_ADC(const pin_t pin) { return (int8_t)((pin >> 10)
|
|||
#define P1_29 LPC1768_PIN(PORT(1), PIN(29), INTERRUPT(0), PWM(0), ADC_NONE)
|
||||
#define P1_30 LPC1768_PIN(PORT(1), PIN(30), INTERRUPT(0), PWM(0), ADC_CHAN(4))
|
||||
#define P1_31 LPC1768_PIN(PORT(1), PIN(31), INTERRUPT(0), PWM(0), ADC_CHAN(5))
|
||||
#define P2_0 LPC1768_PIN(PORT(2), PIN(0), INTERRUPT(1), PWM(1), ADC_NONE)
|
||||
#define P2_1 LPC1768_PIN(PORT(2), PIN(1), INTERRUPT(1), PWM(1), ADC_NONE)
|
||||
#define P2_2 LPC1768_PIN(PORT(2), PIN(2), INTERRUPT(1), PWM(1), ADC_NONE)
|
||||
#define P2_3 LPC1768_PIN(PORT(2), PIN(3), INTERRUPT(1), PWM(1), ADC_NONE)
|
||||
#define P2_4 LPC1768_PIN(PORT(2), PIN(4), INTERRUPT(1), PWM(1), ADC_NONE)
|
||||
#define P2_5 LPC1768_PIN(PORT(2), PIN(5), INTERRUPT(1), PWM(1), ADC_NONE)
|
||||
#define P2_6 LPC1768_PIN(PORT(2), PIN(6), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P2_7 LPC1768_PIN(PORT(2), PIN(7), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P2_8 LPC1768_PIN(PORT(2), PIN(8), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P2_9 LPC1768_PIN(PORT(2), PIN(9), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P2_00 LPC1768_PIN(PORT(2), PIN(0), INTERRUPT(1), PWM(1), ADC_NONE)
|
||||
#define P2_01 LPC1768_PIN(PORT(2), PIN(1), INTERRUPT(1), PWM(1), ADC_NONE)
|
||||
#define P2_02 LPC1768_PIN(PORT(2), PIN(2), INTERRUPT(1), PWM(1), ADC_NONE)
|
||||
#define P2_03 LPC1768_PIN(PORT(2), PIN(3), INTERRUPT(1), PWM(1), ADC_NONE)
|
||||
#define P2_04 LPC1768_PIN(PORT(2), PIN(4), INTERRUPT(1), PWM(1), ADC_NONE)
|
||||
#define P2_05 LPC1768_PIN(PORT(2), PIN(5), INTERRUPT(1), PWM(1), ADC_NONE)
|
||||
#define P2_06 LPC1768_PIN(PORT(2), PIN(6), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P2_07 LPC1768_PIN(PORT(2), PIN(7), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P2_08 LPC1768_PIN(PORT(2), PIN(8), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P2_09 LPC1768_PIN(PORT(2), PIN(9), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P2_10 LPC1768_PIN(PORT(2), PIN(10), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P2_11 LPC1768_PIN(PORT(2), PIN(11), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
#define P2_12 LPC1768_PIN(PORT(2), PIN(12), INTERRUPT(1), PWM(0), ADC_NONE)
|
||||
|
|
@ -231,7 +231,7 @@ constexpr bool INTERRUPT_PIN(const pin_t p) {
|
|||
constexpr pin_t adc_pin_table[] = {
|
||||
P0_23, P0_24, P0_25, P0_26, P1_30, P1_31,
|
||||
#if SERIAL_PORT != 0
|
||||
P0_3, P0_2
|
||||
P0_03, P0_02
|
||||
#endif
|
||||
};
|
||||
|
||||
|
|
@ -245,17 +245,17 @@ constexpr int8_t DIGITAL_PIN_TO_ANALOG_PIN(const pin_t p) {
|
|||
|
||||
// P0.6 thru P0.9 are for the onboard SD card
|
||||
// P0.29 and P0.30 are for the USB port
|
||||
#define HAL_SENSITIVE_PINS P0_6, P0_7, P0_8, P0_9, P0_29, P0_30
|
||||
#define HAL_SENSITIVE_PINS P0_06, P0_07, P0_08, P0_09, P0_29, P0_30
|
||||
|
||||
// Pin map for M43 and M226
|
||||
const pin_t pin_map[] = {
|
||||
#if SERIAL_PORT != 3
|
||||
P0_0, P0_1,
|
||||
P0_00, P0_01,
|
||||
#endif
|
||||
#if SERIAL_PORT != 0
|
||||
P0_2, P0_3,
|
||||
P0_02, P0_03,
|
||||
#endif
|
||||
P0_4, P0_5, P0_6, P0_7, P0_8, P0_9,
|
||||
P0_04, P0_05, P0_06, P0_07, P0_08, P0_09,
|
||||
#if SERIAL_PORT != 2
|
||||
P0_10, P0_11,
|
||||
#endif
|
||||
|
|
@ -264,11 +264,11 @@ const pin_t pin_map[] = {
|
|||
#endif
|
||||
P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24,
|
||||
P0_25, P0_26, P0_27, P0_28, P0_29, P0_30,
|
||||
P1_0, P1_1, P1_4, P1_8, P1_9, P1_10, P1_14, P1_15,
|
||||
P1_00, P1_01, P1_04, P1_08, P1_09, P1_10, P1_14, P1_15,
|
||||
P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23,
|
||||
P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31,
|
||||
P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7,
|
||||
P2_8, P2_9, P2_10, P2_11, P2_12, P2_13,
|
||||
P2_00, P2_01, P2_02, P2_03, P2_04, P2_05, P2_06, P2_07,
|
||||
P2_08, P2_09, P2_10, P2_11, P2_12, P2_13,
|
||||
P3_25, P3_26,
|
||||
P4_28, P4_29
|
||||
};
|
||||
|
|
|
|||
|
|
@ -26,10 +26,10 @@
|
|||
#define LPC_SOFTWARE_SPI
|
||||
|
||||
/** onboard SD card */
|
||||
//#define SCK_PIN P0_7
|
||||
//#define MISO_PIN P0_8
|
||||
//#define MOSI_PIN P0_9
|
||||
//#define SS_PIN P0_6
|
||||
//#define SCK_PIN P0_07
|
||||
//#define MISO_PIN P0_08
|
||||
//#define MOSI_PIN P0_09
|
||||
//#define SS_PIN P0_06
|
||||
/** external */
|
||||
#define SCK_PIN P0_15
|
||||
#define MISO_PIN P0_17
|
||||
|
|
|
|||
|
|
@ -28,11 +28,7 @@
|
|||
* M42: Change pin status via GCode
|
||||
*
|
||||
* P<pin> Pin number (LED if omitted)
|
||||
* For LPC1768 use M42 P1.20 S255 if wanting to set P1_20 to logic 1
|
||||
* NOTE - Repetier Host truncates trailing zeros on a decimal when
|
||||
* sending commands so typing M42 P1.20 S255 results in
|
||||
* M42 P1.2 S255 being sent. Pronterface doesn't have this issue.
|
||||
*
|
||||
* For LPC1768 enter pin P1_20 as M42 P1.20
|
||||
* S<byte> Pin status from 0 - 255
|
||||
*/
|
||||
void GcodeSuite::M42() {
|
||||
|
|
|
|||
|
|
@ -48,23 +48,23 @@
|
|||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN P2_0
|
||||
#define X_DIR_PIN P0_5
|
||||
#define X_ENABLE_PIN P0_4
|
||||
#define X_STEP_PIN P2_00
|
||||
#define X_DIR_PIN P0_05
|
||||
#define X_ENABLE_PIN P0_04
|
||||
|
||||
#define Y_STEP_PIN P2_1
|
||||
#define Y_STEP_PIN P2_01
|
||||
#define Y_DIR_PIN P0_11
|
||||
#define Y_ENABLE_PIN P0_10
|
||||
|
||||
#define Z_STEP_PIN P2_2
|
||||
#define Z_STEP_PIN P2_02
|
||||
#define Z_DIR_PIN P0_20
|
||||
#define Z_ENABLE_PIN P0_19
|
||||
|
||||
#define E0_STEP_PIN P2_3
|
||||
#define E0_STEP_PIN P2_03
|
||||
#define E0_DIR_PIN P0_22
|
||||
#define E0_ENABLE_PIN P0_21
|
||||
|
||||
#define E1_STEP_PIN P2_8
|
||||
#define E1_STEP_PIN P2_08
|
||||
#define E1_DIR_PIN P2_13
|
||||
#define E1_ENABLE_PIN P4_29
|
||||
|
||||
|
|
@ -80,14 +80,14 @@
|
|||
// Heaters / Fans
|
||||
//
|
||||
// EFB
|
||||
#define HEATER_0_PIN P2_4
|
||||
#define HEATER_BED_PIN P2_5
|
||||
#define FAN_PIN P2_7
|
||||
#define HEATER_0_PIN P2_04
|
||||
#define HEATER_BED_PIN P2_05
|
||||
#define FAN_PIN P2_07
|
||||
#define FAN1_PIN P0_26
|
||||
|
||||
#if ENABLED(AZSMZ_12864)
|
||||
#define BEEPER_PIN P1_30
|
||||
#define DOGLCD_A0 P2_6
|
||||
#define DOGLCD_A0 P2_06
|
||||
#define DOGLCD_CS P1_22
|
||||
#define BTN_EN1 P4_28
|
||||
#define BTN_EN2 P1_27
|
||||
|
|
@ -104,11 +104,11 @@
|
|||
#define ENET_RXD1 P1_10
|
||||
#define ENET_MOC P1_16
|
||||
#define REF_CLK P1_15
|
||||
#define ENET_RXD0 P1_9
|
||||
#define ENET_CRS P1_8
|
||||
#define ENET_TX_EN P1_4
|
||||
#define ENET_TXD0 P1_0
|
||||
#define ENET_TXD1 P1_1
|
||||
#define ENET_RXD0 P1_09
|
||||
#define ENET_CRS P1_08
|
||||
#define ENET_TX_EN P1_04
|
||||
#define ENET_TXD0 P1_00
|
||||
#define ENET_TXD1 P1_01
|
||||
|
||||
/**
|
||||
* PWMs
|
||||
|
|
|
|||
|
|
@ -49,23 +49,23 @@
|
|||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN P2_1
|
||||
#define X_STEP_PIN P2_01
|
||||
#define X_DIR_PIN P0_11
|
||||
#define X_ENABLE_PIN P0_10
|
||||
|
||||
#define Y_STEP_PIN P2_2
|
||||
#define Y_STEP_PIN P2_02
|
||||
#define Y_DIR_PIN P0_20
|
||||
#define Y_ENABLE_PIN P0_19
|
||||
|
||||
#define Z_STEP_PIN P2_3
|
||||
#define Z_STEP_PIN P2_03
|
||||
#define Z_DIR_PIN P0_22
|
||||
#define Z_ENABLE_PIN P0_21
|
||||
|
||||
#define E0_STEP_PIN P2_0
|
||||
#define E0_DIR_PIN P0_5
|
||||
#define E0_ENABLE_PIN P0_4
|
||||
#define E0_STEP_PIN P2_00
|
||||
#define E0_DIR_PIN P0_05
|
||||
#define E0_ENABLE_PIN P0_04
|
||||
|
||||
#define E1_STEP_PIN P2_8
|
||||
#define E1_STEP_PIN P2_08
|
||||
#define E1_DIR_PIN P2_13
|
||||
#define E1_ENABLE_PIN P4_29
|
||||
|
||||
|
|
@ -82,9 +82,9 @@
|
|||
// Heaters / Fans
|
||||
//
|
||||
|
||||
#define HEATER_BED_PIN P2_7
|
||||
#define HEATER_0_PIN P2_4
|
||||
#define HEATER_1_PIN P2_5
|
||||
#define HEATER_BED_PIN P2_07
|
||||
#define HEATER_0_PIN P2_04
|
||||
#define HEATER_1_PIN P2_05
|
||||
#define FAN_PIN P0_26
|
||||
#define FAN1_PIN P1_22
|
||||
|
||||
|
|
@ -94,7 +94,7 @@
|
|||
|
||||
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
|
||||
#define BEEPER_PIN P1_30
|
||||
#define DOGLCD_A0 P2_6
|
||||
#define DOGLCD_A0 P2_06
|
||||
#define DOGLCD_CS P0_16
|
||||
|
||||
#define BTN_EN1 P3_25
|
||||
|
|
|
|||
|
|
@ -53,23 +53,23 @@
|
|||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN P2_0
|
||||
#define X_DIR_PIN P0_5
|
||||
#define X_ENABLE_PIN P0_4
|
||||
#define X_STEP_PIN P2_00
|
||||
#define X_DIR_PIN P0_05
|
||||
#define X_ENABLE_PIN P0_04
|
||||
|
||||
#define Y_STEP_PIN P2_1
|
||||
#define Y_STEP_PIN P2_01
|
||||
#define Y_DIR_PIN P0_11
|
||||
#define Y_ENABLE_PIN P0_10
|
||||
|
||||
#define Z_STEP_PIN P2_2
|
||||
#define Z_STEP_PIN P2_02
|
||||
#define Z_DIR_PIN P0_20
|
||||
#define Z_ENABLE_PIN P0_19
|
||||
|
||||
#define E0_STEP_PIN P2_3
|
||||
#define E0_STEP_PIN P2_03
|
||||
#define E0_DIR_PIN P0_22
|
||||
#define E0_ENABLE_PIN P0_21
|
||||
|
||||
#define E1_STEP_PIN P2_8
|
||||
#define E1_STEP_PIN P2_08
|
||||
#define E1_DIR_PIN P2_13
|
||||
#define E1_ENABLE_PIN P4_29
|
||||
|
||||
|
|
@ -88,10 +88,10 @@
|
|||
// Heaters / Fans
|
||||
//
|
||||
|
||||
#define HEATER_BED_PIN P2_5
|
||||
#define HEATER_0_PIN P2_7
|
||||
#define HEATER_1_PIN P2_6
|
||||
#define FAN_PIN P2_4
|
||||
#define HEATER_BED_PIN P2_05
|
||||
#define HEATER_0_PIN P2_07
|
||||
#define HEATER_1_PIN P2_06
|
||||
#define FAN_PIN P2_04
|
||||
|
||||
|
||||
#define PS_ON_PIN P0_25
|
||||
|
|
@ -166,11 +166,11 @@
|
|||
#endif
|
||||
#define ENET_MOC P1_16 // J12-3
|
||||
#define REF_CLK P1_15 // J12-5
|
||||
#define ENET_RXD0 P1_9 // J12-7
|
||||
#define ENET_CRS P1_8 // J12-9
|
||||
#define ENET_TX_EN P1_4 // J12-10
|
||||
#define ENET_TXD0 P1_0 // J12-11
|
||||
#define ENET_TXD1 P1_1 // J12-12
|
||||
#define ENET_RXD0 P1_09 // J12-7
|
||||
#define ENET_CRS P1_08 // J12-9
|
||||
#define ENET_TX_EN P1_04 // J12-10
|
||||
#define ENET_TXD0 P1_00 // J12-11
|
||||
#define ENET_TXD1 P1_01 // J12-12
|
||||
|
||||
/**
|
||||
* PWMs
|
||||
|
|
@ -180,17 +180,17 @@
|
|||
* SERVO2 does NOT have a PWM assigned to it.
|
||||
*
|
||||
* PWM1.1 P1_18 SERVO3_PIN FIL_RUNOUT_PIN 5V output, PWM
|
||||
* PWM1.1 P2_0 E0_STEP_PIN
|
||||
* PWM1.1 P2_00 E0_STEP_PIN
|
||||
* PWM1.2 P1_20 SERVO0_PIN
|
||||
* PWM1.2 P2_1 X_STEP_PIN
|
||||
* PWM1.2 P2_01 X_STEP_PIN
|
||||
* PWM1.3 P1_21 SERVO1_PIN J5-1
|
||||
* PWM1.3 P2_2 Y_STEP_PIN
|
||||
* PWM1.3 P2_02 Y_STEP_PIN
|
||||
* PWM1.4 P1_23 SDSS(SSEL0) J3-5 AUX-3
|
||||
* PWM1.4 P2_3 Z_STEP_PIN
|
||||
* PWM1.4 P2_03 Z_STEP_PIN
|
||||
* PWM1.5 P1_24 X_MIN_PIN 10K PULLUP TO 3.3v, 1K SERIES
|
||||
* PWM1.5 P2_4 RAMPS_D9_PIN
|
||||
* PWM1.5 P2_04 RAMPS_D9_PIN
|
||||
* PWM1.6 P1_26 Y_MIN_PIN 10K PULLUP TO 3.3v, 1K SERIES
|
||||
* PWM1.6 P2_5 RAMPS_D10_PIN
|
||||
* PWM1.6 P2_05 RAMPS_D10_PIN
|
||||
*/
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -65,27 +65,27 @@
|
|||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN P2_1 // (54)
|
||||
#define X_STEP_PIN P2_01 // (54)
|
||||
#define X_DIR_PIN P0_11 // (55)
|
||||
#define X_ENABLE_PIN P0_10 // (38)
|
||||
|
||||
#define Y_STEP_PIN P2_2 // (60)
|
||||
#define Y_STEP_PIN P2_02 // (60)
|
||||
#define Y_DIR_PIN P0_20 // (61)
|
||||
#define Y_ENABLE_PIN P0_19 // (56)
|
||||
|
||||
#define Z_STEP_PIN P2_3 // (46)
|
||||
#define Z_STEP_PIN P2_03 // (46)
|
||||
#define Z_DIR_PIN P0_22 // (48)
|
||||
#define Z_ENABLE_PIN P0_21 // (62)
|
||||
|
||||
#define E0_STEP_PIN P2_0 // (26)
|
||||
#define E0_DIR_PIN P0_5 // (28)
|
||||
#define E0_ENABLE_PIN P0_4 // (24)
|
||||
#define E0_STEP_PIN P2_00 // (26)
|
||||
#define E0_DIR_PIN P0_05 // (28)
|
||||
#define E0_ENABLE_PIN P0_04 // (24)
|
||||
|
||||
#define E1_STEP_PIN P2_8 // (36)
|
||||
#define E1_STEP_PIN P2_08 // (36)
|
||||
#define E1_DIR_PIN P2_13 // (34)
|
||||
#define E1_ENABLE_PIN P4_29 // (30)
|
||||
|
||||
#define E2_STEP_PIN P2_8 // (36)
|
||||
#define E2_STEP_PIN P2_08 // (36)
|
||||
#define E2_DIR_PIN P2_13 // (34)
|
||||
#define E2_ENABLE_PIN P4_29 // (30)
|
||||
|
||||
|
|
@ -127,13 +127,13 @@
|
|||
#define MOSFET_D_PIN -1
|
||||
#endif
|
||||
#ifndef RAMPS_D8_PIN
|
||||
#define RAMPS_D8_PIN P2_7 // (8)
|
||||
#define RAMPS_D8_PIN P2_07 // (8)
|
||||
#endif
|
||||
#ifndef RAMPS_D9_PIN
|
||||
#define RAMPS_D9_PIN P2_4 // (9)
|
||||
#define RAMPS_D9_PIN P2_04 // (9)
|
||||
#endif
|
||||
#ifndef RAMPS_D10_PIN
|
||||
#define RAMPS_D10_PIN P2_5 // (10)
|
||||
#define RAMPS_D10_PIN P2_05 // (10)
|
||||
#endif
|
||||
|
||||
#define HEATER_0_PIN RAMPS_D10_PIN
|
||||
|
|
@ -198,8 +198,8 @@
|
|||
//
|
||||
// Průša i3 MK2 Multiplexer Support
|
||||
//
|
||||
#define E_MUX0_PIN P0_3 // ( 0) Z_CS_PIN
|
||||
#define E_MUX1_PIN P0_2 // ( 1) E0_CS_PIN
|
||||
#define E_MUX0_PIN P0_03 // ( 0) Z_CS_PIN
|
||||
#define E_MUX1_PIN P0_02 // ( 1) E0_CS_PIN
|
||||
#define E_MUX2_PIN P0_26 // (63) E1_CS_PIN
|
||||
|
||||
/**
|
||||
|
|
@ -237,7 +237,7 @@
|
|||
#define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
|
||||
#define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
|
||||
|
||||
#define DOGLCD_A0 P2_6 // (59) J3-8 & AUX-2
|
||||
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
|
||||
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
|
||||
|
||||
#ifdef ULTIPANEL
|
||||
|
|
@ -278,8 +278,8 @@
|
|||
#undef LCD_PINS_ENABLE //P0_18 // (51) (MOSI) J3-10 & AUX-3
|
||||
#undef LCD_PINS_D4 //P0_15 // (52) (SCK) J3-9 & AUX-3
|
||||
|
||||
#undef LCD_PINS_D5 //P2_6 // (59) J3-8 & AUX-2
|
||||
#define DOGLCD_A0 P2_6 // (59) J3-8 & AUX-2
|
||||
#undef LCD_PINS_D5 //P2_06 // (59) J3-8 & AUX-2
|
||||
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
|
||||
#undef LCD_PINS_D6 //P0_26 // (63) J5-3 & AUX-2
|
||||
#undef LCD_PINS_D7 //P1_21 // ( 6) (SERVO1) J5-1 & SERVO connector
|
||||
#define DOGLCD_SCK SCK_PIN
|
||||
|
|
@ -315,11 +315,11 @@
|
|||
#endif
|
||||
#define ENET_MOC P1_16 // (70) J12-3
|
||||
#define REF_CLK P1_15 // (72) J12-5
|
||||
#define ENET_RXD0 P1_9 // (74) J12-7
|
||||
#define ENET_CRS P1_8 // (76) J12-9
|
||||
#define ENET_TX_EN P1_4 // (77) J12-10
|
||||
#define ENET_TXD0 P1_0 // (78) J12-11
|
||||
#define ENET_TXD1 P1_1 // (79) J12-12
|
||||
#define ENET_RXD0 P1_09 // (74) J12-7
|
||||
#define ENET_CRS P1_08 // (76) J12-9
|
||||
#define ENET_TX_EN P1_04 // (77) J12-10
|
||||
#define ENET_TXD0 P1_00 // (78) J12-11
|
||||
#define ENET_TXD1 P1_01 // (79) J12-12
|
||||
|
||||
/**
|
||||
* Fast PWMS
|
||||
|
|
@ -339,8 +339,8 @@
|
|||
* P1_20 (11) SERVO0_PIN
|
||||
* P1_21 ( 6) SERVO1_PIN J5-1
|
||||
* P0_18 ( 4) SERVO3_PIN 5V output
|
||||
* *P2_4 ( 9) RAMPS_D9_PIN
|
||||
* *P2_5 (10) RAMPS_D10_PIN
|
||||
* *P2_04 ( 9) RAMPS_D9_PIN
|
||||
* *P2_05 (10) RAMPS_D10_PIN
|
||||
*
|
||||
* * - If used as a heater driver then a Fast PWM is NOT assigned. If used as
|
||||
* a fan driver then enabling FAST_PWM_FAN assigns a Fast PWM to it.
|
||||
|
|
|
|||
Loading…
Reference in a new issue