zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

If fastio.h is not messed up then Teensylu and Printrboard are actually using the same pins.

Browse source
This commit is contained in:
Johann Rocholl 2012-12-08 19:46:42 -08:00
parent 6aa87a7b67
commit a30007caa4
1 changed files with 38 additions and 168 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

174
Marlin/pins.h
View file

@ -957,13 +957,19 @@
#endif #endif
/**************************************************************************************** /****************************************************************************************
* Teensylu 0.7 pin assingments (ATMEGA90USB) * Teensylu 0.7 / Printrboard pin assignments (AT90USB1286)
* Requires the Teensyduino software with Teensy2.0++ selected in arduino IDE! * Requires the Teensyduino software with Teensy++ 2.0 selected in Arduino IDE!
http://www.pjrc.com/teensy/teensyduino.html
* See http://reprap.org/wiki/Printrboard for more info
****************************************************************************************/ ****************************************************************************************/
#if MOTHERBOARD == 8 #if MOTHERBOARD == 8 || MOTHERBOARD == 81
#undef MOTHERBOARD
#define MOTHERBOARD 8 #define MOTHERBOARD 8
#define KNOWN_BOARD 1 #define KNOWN_BOARD 1
#ifndef __AVR_AT90USB1286__
#error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
#endif
#define X_STEP_PIN 0 #define X_STEP_PIN 0
#define X_DIR_PIN 1 #define X_DIR_PIN 1
@ -985,20 +991,18 @@
#define E0_STEP_PIN 6 #define E0_STEP_PIN 6
#define E0_DIR_PIN 7 #define E0_DIR_PIN 7
#define E0_ENABLE_PIN 19 #define E0_ENABLE_PIN 19
#define HEATER_0_PIN 21 // Extruder #define HEATER_0_PIN 21 // Extruder
#define HEATER_1_PIN -1 #define HEATER_1_PIN -1
#define HEATER_2_PIN -1 #define HEATER_2_PIN -1
#define HEATER_BED_PIN 20 // Bed #define HEATER_BED_PIN 20 // Bed
#define FAN_PIN 22 // Fan #define FAN_PIN 22
#define TEMP_0_PIN 7 // Extruder #define TEMP_0_PIN 7 // Extruder / Analog PIN numbering
#define TEMP_1_PIN -1 #define TEMP_1_PIN -1
#define TEMP_2_PIN -1 #define TEMP_2_PIN -1
#define TEMP_BED_PIN 6 // Bed #define TEMP_BED_PIN 6 // Bed / Analog PIN numbering
#define SDPOWER -1 #define SDPOWER -1
#define SDSS 8 #define SDSS 8
@ -1013,142 +1017,8 @@
#define MISO_PIN 11 #define MISO_PIN 11
#define MOSI_PIN 10 #define MOSI_PIN 10
#endif #endif
#endif
/**************************************************************************************** #endif // MOTHERBOARD == 8 (Teensylu) or 81 (Printrboard)
* Printrboard Rev. B pin assingments (ATMEGA90USB1286)
* Requires the Teensyduino software with Teensy++ 2.0 selected in arduino IDE!
http://www.pjrc.com/teensy/teensyduino.html
* See http://reprap.org/wiki/Printrboard for more info
****************************************************************************************/
#if MOTHERBOARD == 81
#undef MOTHERBOARD
#define MOTHERBOARD 8 // Disable MarlinSerial etc.
#define KNOWN_BOARD 1
#ifndef __AVR_AT90USB1286__
#error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
#endif
#define X_STEP_PIN 28
#define X_DIR_PIN 29
#define X_ENABLE_PIN 19
#define X_MIN_PIN 47
#define X_MAX_PIN -1
#define Y_STEP_PIN 30
#define Y_DIR_PIN 31
#define Y_ENABLE_PIN 18
#define Y_MIN_PIN 20
#define Y_MAX_PIN -1
#define Z_STEP_PIN 32
#define Z_DIR_PIN 33
#define Z_ENABLE_PIN 17
#define Z_MIN_PIN 36
#define Z_MAX_PIN -1
#define E0_STEP_PIN 34
#define E0_DIR_PIN 35
#define E0_ENABLE_PIN 13
#define HEATER_0_PIN 15 // Extruder
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 14 // Bed
#define FAN_PIN 16 // Fan
#define TEMP_0_PIN 1 // Extruder - ANALOG PIN NUMBERING
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 0 // Bed - ANALOG PIN NUMBERING
#define SDPOWER -1
#define SDSS 26
#define LED_PIN -1
#define PS_ON_PIN -1
#define KILL_PIN -1
#ifndef SDSUPPORT
// these pins are defined in the SD library if building with SD support
#define SCK_PIN 21
#define MISO_PIN 22
#define MOSI_PIN 23
#endif
#ifdef ULTRA_LCD
#ifdef NEWPANEL
//arduino pin which triggers an piezzo beeper
#define BEEPER 33 // Beeper on AUX-4
#ifndef MCP28017_LCD
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif // MCP28017_LCD
//buttons are directly attached using AUX-2
#define BTN_EN1 11 // PC1
#define BTN_EN2 12 // PC2
#ifndef VERSAPANEL
#define BTN_ENC 31 //the click
#endif
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define SDCARDDETECT -1 // Ramps does not use this port
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#else //old style panel with shift register
//arduino pin witch triggers an piezzo beeper
#define BEEPER 33 No Beeper added
//buttons are attached to a shift register
// Not wired this yet
//#define SHIFT_CLK 38
//#define SHIFT_LD 42
//#define SHIFT_OUT 40
//#define SHIFT_EN 17
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
//bits in the shift register that carry the buttons for:
// left up center down right red
#define BL_LE 7
#define BL_UP 6
#define BL_MI 5
#define BL_DW 4
#define BL_RI 3
#define BL_ST 2
#define BLEN_B 1
#define BLEN_A 0
#endif
#endif //ULTRA_LCD
#endif
/**************************************************************************************** /****************************************************************************************
* Brainwave 1.0 pin assignments (AT90USB646) * Brainwave 1.0 pin assignments (AT90USB646)
@ -1185,10 +1055,10 @@
#define Z_MAX_PIN -1 #define Z_MAX_PIN -1
#define Z_ATT_PIN 16 #define Z_ATT_PIN 16
#define E0_STEP_PIN 21 #define E0_STEP_PIN 21
#define E0_DIR_PIN 23 #define E0_DIR_PIN 23
#define E0_ENABLE_PIN 22 #define E0_ENABLE_PIN 22
#define E0_ATT_PIN 20 #define E0_ATT_PIN 20
#define HEATER_0_PIN 4 // Extruder #define HEATER_0_PIN 4 // Extruder
#define HEATER_1_PIN -1 #define HEATER_1_PIN -1
@ -1210,12 +1080,12 @@
#ifndef SDSUPPORT #ifndef SDSUPPORT
// these pins are defined in the SD library if building with SD support // these pins are defined in the SD library if building with SD support
#define SCK_PIN 21 #define SCK_PIN 9
#define MISO_PIN 22 #define MISO_PIN 11
#define MOSI_PIN 23 #define MOSI_PIN 10
#endif #endif
#endif #endif // MOTHERBOARD == 82 (Brainwave)
/**************************************************************************************** /****************************************************************************************
* Gen3+ pin assignment * Gen3+ pin assignment