K8200: sample config back in sync
* Configuration.h: * updated header comment * new UUID feature used * sync to default config * typos fixed * changes better documented * reflect change in SDSUPPORT feature * Configuration_adv.h * updated header comment * thermal protection tuned to work with K8200 * homing tuned * sync to default config * typos fixed * changes better documented * reflect change in LCD features * use long filenames * use Watchdog * use Babystepping * use Auto Filament Change
This commit is contained in:
parent
9f8e6dce20
commit
a4fe6a45ae
|
@ -1,7 +1,7 @@
|
||||||
// Example configuration file for Vellemann K8200
|
// Sample configuration file for Vellemann K8200
|
||||||
// tested on K8200 with VM8201 (Display)
|
// tested on K8200 with VM8201 (Display)
|
||||||
// and Arduino 1.6.1 (Win) by @CONSULitAS, 2015-04-14
|
// and Arduino 1.6.8 (Mac) by @CONSULitAS, 2016-02-21
|
||||||
// https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2015-04-14.zip
|
// https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-02-21.zip
|
||||||
|
|
||||||
#ifndef CONFIGURATION_H
|
#ifndef CONFIGURATION_H
|
||||||
#define CONFIGURATION_H
|
#define CONFIGURATION_H
|
||||||
|
@ -52,7 +52,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
|
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
|
||||||
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
|
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
|
||||||
// build by the user have been successfully uploaded into firmware.
|
// build by the user have been successfully uploaded into firmware.
|
||||||
#define STRING_CONFIG_H_AUTHOR "(K8200, CONSULitAS)" // Who made the changes.
|
#define STRING_CONFIG_H_AUTHOR "(K8200, @CONSULitAS)" // Who made the changes.
|
||||||
#define SHOW_BOOTSCREEN
|
#define SHOW_BOOTSCREEN
|
||||||
#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1
|
#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1
|
||||||
//#define STRING_SPLASH_LINE2 STRING_DISTRIBUTION_DATE // will be shown during bootup in line 2
|
//#define STRING_SPLASH_LINE2 STRING_DISTRIBUTION_DATE // will be shown during bootup in line 2
|
||||||
|
@ -80,11 +80,11 @@ Here are some standard links for getting your machine calibrated:
|
||||||
|
|
||||||
// Optional custom name for your RepStrap or other custom machine
|
// Optional custom name for your RepStrap or other custom machine
|
||||||
// Displayed in the LCD "Ready" message
|
// Displayed in the LCD "Ready" message
|
||||||
//#define CUSTOM_MACHINE_NAME "3D Printer"
|
#define CUSTOM_MACHINE_NAME "K8200"
|
||||||
|
|
||||||
// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
|
// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
|
||||||
// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
|
// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
|
||||||
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
|
#define MACHINE_UUID "2b7dea3b-844e-4ab1-aa96-bb6406607d6e" // K8200 standard config with VM8201 (Display)
|
||||||
|
|
||||||
// This defines the number of extruders
|
// This defines the number of extruders
|
||||||
// :[1,2,3,4]
|
// :[1,2,3,4]
|
||||||
|
@ -207,11 +207,26 @@ Here are some standard links for getting your machine calibrated:
|
||||||
#define PID_INTEGRAL_DRIVE_MAX PID_MAX //limit for the integral term
|
#define PID_INTEGRAL_DRIVE_MAX PID_MAX //limit for the integral term
|
||||||
#define K1 0.95 //smoothing factor within the PID
|
#define K1 0.95 //smoothing factor within the PID
|
||||||
|
|
||||||
|
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
|
||||||
|
// Ultimaker
|
||||||
|
//#define DEFAULT_Kp 22.2
|
||||||
|
//#define DEFAULT_Ki 1.08
|
||||||
|
//#define DEFAULT_Kd 114
|
||||||
|
|
||||||
|
// MakerGear
|
||||||
|
//#define DEFAULT_Kp 7.0
|
||||||
|
//#define DEFAULT_Ki 0.1
|
||||||
|
//#define DEFAULT_Kd 12
|
||||||
|
|
||||||
|
// Mendel Parts V9 on 12V
|
||||||
|
//#define DEFAULT_Kp 63.0
|
||||||
|
//#define DEFAULT_Ki 2.25
|
||||||
|
//#define DEFAULT_Kd 440
|
||||||
|
|
||||||
// Vellemann K8200 Extruder - calculated with PID Autotune and tested
|
// Vellemann K8200 Extruder - calculated with PID Autotune and tested
|
||||||
#define DEFAULT_Kp 24.29
|
#define DEFAULT_Kp 24.29
|
||||||
#define DEFAULT_Ki 1.58
|
#define DEFAULT_Ki 1.58
|
||||||
#define DEFAULT_Kd 93.51
|
#define DEFAULT_Kd 93.51
|
||||||
|
|
||||||
#endif // PIDTEMP
|
#endif // PIDTEMP
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
@ -226,7 +241,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// If your configuration is significantly different than this and you don't understand the issues involved, you probably
|
// If your configuration is significantly different than this and you don't understand the issues involved, you probably
|
||||||
// shouldn't use bed PID until someone else verifies your hardware works.
|
// shouldn't use bed PID until someone else verifies your hardware works.
|
||||||
// If this is enabled, find your own PID constants below.
|
// If this is enabled, find your own PID constants below.
|
||||||
//#define PIDTEMPBED
|
#define PIDTEMPBED
|
||||||
|
|
||||||
//#define BED_LIMIT_SWITCHING
|
//#define BED_LIMIT_SWITCHING
|
||||||
|
|
||||||
|
@ -242,13 +257,25 @@ Here are some standard links for getting your machine calibrated:
|
||||||
|
|
||||||
#define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
|
#define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
|
||||||
|
|
||||||
//Vellemann K8200 PCB heatbed with standard PCU at 60 degreesC - calculated with PID Autotune and tested
|
//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||||
|
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||||
|
//#define DEFAULT_bedKp 10.00
|
||||||
|
//#define DEFAULT_bedKi .023
|
||||||
|
//#define DEFAULT_bedKd 305.4
|
||||||
|
|
||||||
|
//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||||
//from pidautotune
|
//from pidautotune
|
||||||
|
//#define DEFAULT_bedKp 97.1
|
||||||
|
//#define DEFAULT_bedKi 1.41
|
||||||
|
//#define DEFAULT_bedKd 1675.16
|
||||||
|
|
||||||
|
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
|
||||||
|
|
||||||
|
// Vellemann K8200 PCB heatbed with standard PCU at 60 degreesC - calculated with PID Autotune and tested
|
||||||
|
// from pidautotune
|
||||||
#define DEFAULT_bedKp 341.88
|
#define DEFAULT_bedKp 341.88
|
||||||
#define DEFAULT_bedKi 25.32
|
#define DEFAULT_bedKi 25.32
|
||||||
#define DEFAULT_bedKd 1153.89
|
#define DEFAULT_bedKd 1153.89
|
||||||
|
|
||||||
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
|
|
||||||
#endif // PIDTEMPBED
|
#endif // PIDTEMPBED
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -303,7 +330,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
|
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
|
||||||
|
|
||||||
#if DISABLED(ENDSTOPPULLUPS)
|
#if DISABLED(ENDSTOPPULLUPS)
|
||||||
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
|
// define endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
|
||||||
//#define ENDSTOPPULLUP_XMAX
|
//#define ENDSTOPPULLUP_XMAX
|
||||||
//#define ENDSTOPPULLUP_YMAX
|
//#define ENDSTOPPULLUP_YMAX
|
||||||
//#define ENDSTOPPULLUP_ZMAX
|
//#define ENDSTOPPULLUP_ZMAX
|
||||||
|
@ -341,7 +368,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
||||||
// WARNING: When motors turn off there is a chance of losing position accuracy!
|
// WARNING: When motors turn off there is a chance of losing position accuracy!
|
||||||
#define DISABLE_X false
|
#define DISABLE_X false
|
||||||
#define DISABLE_Y false
|
#define DISABLE_Y false
|
||||||
#define DISABLE_Z true
|
#define DISABLE_Z false // not for K8200 -> looses Steps
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
|
@ -352,7 +379,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
||||||
|
|
||||||
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||||
#define INVERT_X_DIR false
|
#define INVERT_X_DIR false
|
||||||
#define INVERT_Y_DIR false
|
#define INVERT_Y_DIR false // was true -> why for K8200?
|
||||||
#define INVERT_Z_DIR false
|
#define INVERT_Z_DIR false
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -453,7 +480,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
||||||
#define FRONT_PROBE_BED_POSITION 20
|
#define FRONT_PROBE_BED_POSITION 20
|
||||||
#define BACK_PROBE_BED_POSITION 170
|
#define BACK_PROBE_BED_POSITION 170
|
||||||
|
|
||||||
#define MIN_PROBE_EDGE 10 // The Z probe square sides can be no smaller than this.
|
#define MIN_PROBE_EDGE 10 // The Z probe minimum square sides can be no smaller than this.
|
||||||
|
|
||||||
// Set the number of grid points per dimension.
|
// Set the number of grid points per dimension.
|
||||||
// You probably don't need more than 3 (squared=9).
|
// You probably don't need more than 3 (squared=9).
|
||||||
|
@ -493,8 +520,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
||||||
//#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
|
//#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
// If you have enabled the bed auto leveling and are using the same Z probe for Z homing,
|
|
||||||
// it is highly recommended you let this Z_SAFE_HOMING enabled!!!
|
//If you have enabled the Bed Auto Leveling and are using the same Z Probe for Z Homing,
|
||||||
|
//it is highly recommended you let this Z_SAFE_HOMING enabled!!!
|
||||||
|
|
||||||
#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
|
#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
|
||||||
// When defined, it will:
|
// When defined, it will:
|
||||||
|
@ -574,7 +602,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
||||||
#define DEFAULT_MAX_ACCELERATION {9000,9000,100,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot.
|
#define DEFAULT_MAX_ACCELERATION {9000,9000,100,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot.
|
||||||
|
|
||||||
#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration in mm/s^2 for printing moves
|
#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration in mm/s^2 for printing moves
|
||||||
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration in mm/s^2 for retracts
|
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration in mm/s^2 for retracts
|
||||||
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
|
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
|
||||||
|
|
||||||
// The speed change that does not require acceleration (i.e. the software might assume it can be done instantaneously)
|
// The speed change that does not require acceleration (i.e. the software might assume it can be done instantaneously)
|
||||||
|
@ -647,7 +675,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
||||||
|
|
||||||
//#define ULTRA_LCD //general LCD support, also 16x2
|
//#define ULTRA_LCD //general LCD support, also 16x2
|
||||||
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
||||||
//#define SDSUPPORT // Enable SD Card Support in Hardware Console
|
|
||||||
|
#define SDSUPPORT // Enable SD Card Support in Hardware Console
|
||||||
// Changed behaviour! If you need SDSUPPORT uncomment it!
|
// Changed behaviour! If you need SDSUPPORT uncomment it!
|
||||||
//#define SPI_SPEED SPI_HALF_SPEED // (also SPI_QUARTER_SPEED, SPI_EIGHTH_SPEED) Use slower SD transfer mode (not normally needed - uncomment if you're getting volume init error)
|
//#define SPI_SPEED SPI_HALF_SPEED // (also SPI_QUARTER_SPEED, SPI_EIGHTH_SPEED) Use slower SD transfer mode (not normally needed - uncomment if you're getting volume init error)
|
||||||
//#define SD_CHECK_AND_RETRY // Use CRC checks and retries on the SD communication
|
//#define SD_CHECK_AND_RETRY // Use CRC checks and retries on the SD communication
|
||||||
|
|
|
@ -1,3 +1,8 @@
|
||||||
|
// Sample configuration file for Vellemann K8200
|
||||||
|
// tested on K8200 with VM8201 (Display)
|
||||||
|
// and Arduino 1.6.8 (Mac) by @CONSULitAS, 2016-02-21
|
||||||
|
// https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-02-21.zip
|
||||||
|
|
||||||
#ifndef CONFIGURATION_ADV_H
|
#ifndef CONFIGURATION_ADV_H
|
||||||
#define CONFIGURATION_ADV_H
|
#define CONFIGURATION_ADV_H
|
||||||
|
|
||||||
|
@ -18,8 +23,8 @@
|
||||||
* Thermal Protection parameters
|
* Thermal Protection parameters
|
||||||
*/
|
*/
|
||||||
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
|
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
|
||||||
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
|
#define THERMAL_PROTECTION_PERIOD 60 // Seconds
|
||||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
#define THERMAL_PROTECTION_HYSTERESIS 8 // Degrees Celsius
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Whenever an M104 or M109 increases the target temperature the firmware will wait for the
|
* Whenever an M104 or M109 increases the target temperature the firmware will wait for the
|
||||||
|
@ -27,7 +32,7 @@
|
||||||
* degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109,
|
* degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109,
|
||||||
* but only if the current temperature is far enough below the target for a reliable test.
|
* but only if the current temperature is far enough below the target for a reliable test.
|
||||||
*/
|
*/
|
||||||
#define WATCH_TEMP_PERIOD 16 // Seconds
|
#define WATCH_TEMP_PERIOD 30 // Seconds
|
||||||
#define WATCH_TEMP_INCREASE 4 // Degrees Celsius
|
#define WATCH_TEMP_INCREASE 4 // Degrees Celsius
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
@ -93,12 +98,12 @@
|
||||||
// When first starting the main fan, run it at full speed for the
|
// When first starting the main fan, run it at full speed for the
|
||||||
// given number of milliseconds. This gets the fan spinning reliably
|
// given number of milliseconds. This gets the fan spinning reliably
|
||||||
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
|
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
|
||||||
//#define FAN_KICKSTART_TIME 100
|
#define FAN_KICKSTART_TIME 500
|
||||||
|
|
||||||
// This defines the minimal speed for the main fan, run in PWM mode
|
// This defines the minimal speed for the main fan, run in PWM mode
|
||||||
// to enable uncomment and set minimal PWM speed for reliable running (1-255)
|
// to enable uncomment and set minimal PWM speed for reliable running (1-255)
|
||||||
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM
|
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM
|
||||||
#define FAN_MIN_PWM 50 // K8200: fan stops running at about 35 to 40 (of 255)
|
#define FAN_MIN_PWM 50
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
|
@ -212,9 +217,9 @@
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 3
|
#define Z_HOME_BUMP_MM 2
|
||||||
#define HOMING_BUMP_DIVISOR {2, 2, 4} // Re-Bump Speed Divisor (Divides the Homing Feedrate)
|
#define HOMING_BUMP_DIVISOR {4, 4, 8} // Re-Bump Speed Divisor (Divides the Homing Feedrate)
|
||||||
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
|
#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
|
||||||
|
|
||||||
// When G28 is called, this option will make Y home before X
|
// When G28 is called, this option will make Y home before X
|
||||||
//#define HOME_Y_BEFORE_X
|
//#define HOME_Y_BEFORE_X
|
||||||
|
@ -303,10 +308,10 @@
|
||||||
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
||||||
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
||||||
// using:
|
// using:
|
||||||
//#define MENU_ADDAUTOSTART
|
#define MENU_ADDAUTOSTART
|
||||||
|
|
||||||
// Show a progress bar on HD44780 LCDs for SD printing
|
// Show a progress bar on HD44780 LCDs for SD printing
|
||||||
//#define LCD_PROGRESS_BAR
|
#define LCD_PROGRESS_BAR
|
||||||
|
|
||||||
#if ENABLED(LCD_PROGRESS_BAR)
|
#if ENABLED(LCD_PROGRESS_BAR)
|
||||||
// Amount of time (ms) to show the bar
|
// Amount of time (ms) to show the bar
|
||||||
|
@ -320,7 +325,7 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// This allows hosts to request long names for files and folders with M33
|
// This allows hosts to request long names for files and folders with M33
|
||||||
//#define LONG_FILENAME_HOST_SUPPORT
|
#define LONG_FILENAME_HOST_SUPPORT
|
||||||
|
|
||||||
// This option allows you to abort SD printing when any endstop is triggered.
|
// This option allows you to abort SD printing when any endstop is triggered.
|
||||||
// This feature must be enabled with "M540 S1" or from the LCD menu.
|
// This feature must be enabled with "M540 S1" or from the LCD menu.
|
||||||
|
@ -341,11 +346,10 @@
|
||||||
//#define USE_SMALL_INFOFONT
|
//#define USE_SMALL_INFOFONT
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
|
|
||||||
// @section more
|
// @section more
|
||||||
|
|
||||||
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
||||||
//#define USE_WATCHDOG
|
#define USE_WATCHDOG
|
||||||
|
|
||||||
#if ENABLED(USE_WATCHDOG)
|
#if ENABLED(USE_WATCHDOG)
|
||||||
// If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on.
|
// If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on.
|
||||||
|
@ -359,9 +363,10 @@
|
||||||
// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
|
// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
|
||||||
// it can e.g. be used to change z-positions in the print startup phase in real-time
|
// it can e.g. be used to change z-positions in the print startup phase in real-time
|
||||||
// does not respect endstops!
|
// does not respect endstops!
|
||||||
//#define BABYSTEPPING
|
#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
#define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions
|
#define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions
|
||||||
|
//not implemented for CoreXY and deltabots!
|
||||||
#define BABYSTEP_INVERT_Z false //true for inverse movements in Z
|
#define BABYSTEP_INVERT_Z false //true for inverse movements in Z
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 //faster movements
|
#define BABYSTEP_MULTIPLICATOR 1 //faster movements
|
||||||
#endif
|
#endif
|
||||||
|
@ -389,7 +394,7 @@
|
||||||
#define MM_PER_ARC_SEGMENT 1
|
#define MM_PER_ARC_SEGMENT 1
|
||||||
#define N_ARC_CORRECTION 25
|
#define N_ARC_CORRECTION 25
|
||||||
|
|
||||||
const unsigned int dropsegments = 5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
const unsigned int dropsegments = 2; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
||||||
|
|
||||||
// @section temperature
|
// @section temperature
|
||||||
|
|
||||||
|
@ -407,7 +412,7 @@ const unsigned int dropsegments = 5; //everything with less than this number of
|
||||||
#if ENABLED(SDSUPPORT)
|
#if ENABLED(SDSUPPORT)
|
||||||
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
||||||
#else
|
#else
|
||||||
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
#define BLOCK_BUFFER_SIZE 32 // maximize block buffer
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section more
|
// @section more
|
||||||
|
@ -454,6 +459,9 @@ const unsigned int dropsegments = 5; //everything with less than this number of
|
||||||
#define FILAMENTCHANGE_ZADD 10
|
#define FILAMENTCHANGE_ZADD 10
|
||||||
#define FILAMENTCHANGE_FIRSTRETRACT -2
|
#define FILAMENTCHANGE_FIRSTRETRACT -2
|
||||||
#define FILAMENTCHANGE_FINALRETRACT -100
|
#define FILAMENTCHANGE_FINALRETRACT -100
|
||||||
|
#define AUTO_FILAMENT_CHANGE //This extrude filament until you press the button on LCD
|
||||||
|
#define AUTO_FILAMENT_CHANGE_LENGTH 0.04 //Extrusion length on automatic extrusion loop
|
||||||
|
#define AUTO_FILAMENT_CHANGE_FEEDRATE 300 //Extrusion feedrate (mm/min) on automatic extrusion loop
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
|
Loading…
Reference in a new issue