From a93e9e6e9b96512e1dda6f9e1cfb836a4a4e0fde Mon Sep 17 00:00:00 2001 From: Ludy Date: Tue, 23 Oct 2018 22:38:17 +0200 Subject: [PATCH] Use preheat labels in place of PLA/ABS (#12194) --- Marlin/Configuration_adv.h | 4 +- Marlin/src/config/default/Configuration_adv.h | 4 +- .../AlephObjects/TAZ4/Configuration_adv.h | 4 +- .../examples/Anet/A2/Configuration_adv.h | 4 +- .../examples/Anet/A2plus/Configuration_adv.h | 4 +- .../examples/Anet/A6/Configuration_adv.h | 4 +- .../examples/Anet/A8/Configuration_adv.h | 4 +- .../config/examples/ArmEd/Configuration_adv.h | 4 +- .../BIBO/TouchX/cyclops/Configuration_adv.h | 4 +- .../BIBO/TouchX/default/Configuration_adv.h | 4 +- .../examples/BQ/Hephestos/Configuration_adv.h | 4 +- .../BQ/Hephestos_2/Configuration_adv.h | 4 +- .../examples/BQ/WITBOX/Configuration_adv.h | 4 +- .../examples/Cartesio/Configuration_adv.h | 4 +- .../Creality/CR-10/Configuration_adv.h | 4 +- .../Creality/CR-10S/Configuration_adv.h | 4 +- .../Creality/CR-10mini/Configuration_adv.h | 4 +- .../Creality/CR-8/Configuration_adv.h | 4 +- .../Creality/Ender-2/Configuration_adv.h | 4 +- .../Creality/Ender-3/Configuration_adv.h | 4 +- .../Creality/Ender-4/Configuration_adv.h | 4 +- .../examples/Einstart-S/Configuration_adv.h | 4 +- .../src/config/examples/Einstart-S/readme.md | 2 +- .../config/examples/Felix/Configuration_adv.h | 4 +- .../FolgerTech/i3-2020/Configuration_adv.h | 4 +- .../Geeetech/MeCreator2/Configuration_adv.h | 4 +- .../Prusa i3 Pro C/Configuration_adv.h | 4 +- .../Prusa i3 Pro W/Configuration_adv.h | 4 +- .../Infitary/i3-M508/Configuration_adv.h | 4 +- .../examples/JGAurora/A5/Configuration_adv.h | 4 +- .../examples/MakerParts/Configuration_adv.h | 4 +- .../examples/Malyan/M150/Configuration_adv.h | 4 +- .../examples/Malyan/M200/Configuration_adv.h | 4 +- .../Micromake/C1/enhanced/Configuration_adv.h | 4 +- .../examples/Mks/Sbase/Configuration_adv.h | 4 +- .../examples/RigidBot/Configuration_adv.h | 4 +- .../config/examples/SCARA/Configuration_adv.h | 4 +- .../examples/Sanguinololu/Configuration_adv.h | 4 +- .../examples/TheBorg/Configuration_adv.h | 4 +- .../examples/TinyBoy2/Configuration_adv.h | 4 +- .../examples/Tronxy/X3A/Configuration_adv.h | 4 +- .../UltiMachine/Archim2/Configuration_adv.h | 4 +- .../Velleman/K8200/Configuration_adv.h | 4 +- .../Velleman/K8400/Configuration_adv.h | 4 +- .../Wanhao/Duplicator 6/Configuration_adv.h | 4 +- .../delta/Anycubic/Kossel/Configuration_adv.h | 4 +- .../FLSUN/auto_calibrate/Configuration_adv.h | 4 +- .../delta/FLSUN/kossel/Configuration_adv.h | 4 +- .../FLSUN/kossel_mini/Configuration_adv.h | 4 +- .../delta/generic/Configuration_adv.h | 4 +- .../delta/kossel_mini/Configuration_adv.h | 4 +- .../delta/kossel_xl/Configuration_adv.h | 4 +- .../gCreate/gMax1.5+/Configuration_adv.h | 4 +- .../examples/makibox/Configuration_adv.h | 4 +- .../tvrrug/Round2/Configuration_adv.h | 4 +- .../config/examples/wt150/Configuration_adv.h | 4 +- Marlin/src/gcode/lcd/M145.cpp | 2 +- Marlin/src/inc/Conditionals_LCD.h | 2 +- Marlin/src/lcd/language/language_an.h | 4 +- Marlin/src/lcd/language/language_bg.h | 20 ++++----- Marlin/src/lcd/language/language_ca.h | 4 +- Marlin/src/lcd/language/language_cz.h | 24 +++++----- Marlin/src/lcd/language/language_da.h | 20 ++++----- Marlin/src/lcd/language/language_de.h | 44 +++++++++---------- Marlin/src/lcd/language/language_el-gr.h | 4 +- Marlin/src/lcd/language/language_el.h | 4 +- Marlin/src/lcd/language/language_en.h | 40 ++++++++--------- Marlin/src/lcd/language/language_es.h | 4 +- Marlin/src/lcd/language/language_eu.h | 24 +++++----- Marlin/src/lcd/language/language_fi.h | 20 ++++----- Marlin/src/lcd/language/language_fr.h | 40 ++++++++--------- Marlin/src/lcd/language/language_gl.h | 20 ++++----- Marlin/src/lcd/language/language_hr.h | 4 +- Marlin/src/lcd/language/language_it.h | 28 ++++++------ Marlin/src/lcd/language/language_jp-kana.h | 4 +- Marlin/src/lcd/language/language_ko_KR.h | 24 +++++----- Marlin/src/lcd/language/language_nl.h | 12 ++--- Marlin/src/lcd/language/language_pl.h | 12 ++--- Marlin/src/lcd/language/language_pt-br.h | 38 ++++++++-------- Marlin/src/lcd/language/language_pt.h | 20 ++++----- Marlin/src/lcd/language/language_ru.h | 24 +++++----- Marlin/src/lcd/language/language_sk.h | 24 +++++----- Marlin/src/lcd/language/language_tr.h | 4 +- Marlin/src/lcd/language/language_uk.h | 4 +- Marlin/src/lcd/language/language_zh_CN.h | 20 ++++----- Marlin/src/lcd/language/language_zh_TW.h | 20 ++++----- Marlin/src/lcd/ultralcd.cpp | 34 +++++++------- 87 files changed, 385 insertions(+), 385 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 28e3888834..799972f53d 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -1632,10 +1632,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h index 28e3888834..799972f53d 100755 --- a/Marlin/src/config/default/Configuration_adv.h +++ b/Marlin/src/config/default/Configuration_adv.h @@ -1632,10 +1632,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 10b2d9852c..97e0caccd8 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Anet/A2/Configuration_adv.h b/Marlin/src/config/examples/Anet/A2/Configuration_adv.h index 2355123b58..0808ed2fbb 100644 --- a/Marlin/src/config/examples/Anet/A2/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A2/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h b/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h index 2355123b58..0808ed2fbb 100644 --- a/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h index b9fb3f8dda..29065dc8e5 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h index 6ce6c5f447..5f78f5ff56 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/ArmEd/Configuration_adv.h b/Marlin/src/config/examples/ArmEd/Configuration_adv.h index 3fcab22b06..75bdf7f072 100644 --- a/Marlin/src/config/examples/ArmEd/Configuration_adv.h +++ b/Marlin/src/config/examples/ArmEd/Configuration_adv.h @@ -1637,10 +1637,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 743ccb0786..ff7083185f 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h index 13681bed91..867f2eac49 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h index 20b6f41e67..ae671b2db4 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h index fc64fe323d..d74569a966 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1639,10 +1639,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h index 20b6f41e67..ae671b2db4 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h index 697cb847af..81e9a9d5af 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h +++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h index 728ed98227..9c3d064e40 100755 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h @@ -1634,10 +1634,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h index 638888d9e2..c07ada114d 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h index 8e79322b47..763fda2da7 100644 --- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h index 6b0a14f708..da5d24deee 100644 --- a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h index fbf8b3f9cd..462675a55b 100644 --- a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h index 7c5a674245..d759d405ec 100644 --- a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h index 7fd90c4fe5..d858169e3d 100644 --- a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Einstart-S/Configuration_adv.h b/Marlin/src/config/examples/Einstart-S/Configuration_adv.h index f670fe80fe..002e5b2e0a 100644 --- a/Marlin/src/config/examples/Einstart-S/Configuration_adv.h +++ b/Marlin/src/config/examples/Einstart-S/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Einstart-S/readme.md b/Marlin/src/config/examples/Einstart-S/readme.md index fbcb5f7668..22e7d8e662 100644 --- a/Marlin/src/config/examples/Einstart-S/readme.md +++ b/Marlin/src/config/examples/Einstart-S/readme.md @@ -10,7 +10,7 @@ The Einstart S is a commercial machine that ships with a proprietary firmware an - Genuine Minebea NEMA17 motors (200 steps/rev) - THC7128 3A Stepper Drivers (configured for 16 microsteps, loud) - 160x160 magnetically coupled non-heated bed - - PLA Only Direct Drive extruder + - PLA-only, Direct Drive extruder - SH1106 OLED Display w/ Cardinal navigation - 9533 I2C PWM RGB LED Chassis illumination - Onboard SD-Card Support diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h index afa1c7ea80..e934805b8a 100644 --- a/Marlin/src/config/examples/Felix/Configuration_adv.h +++ b/Marlin/src/config/examples/Felix/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h index d0f67d230a..3de7d61262 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h index d943b41ccd..8a71910a64 100644 --- a/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -1619,10 +1619,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index b5af0819a4..81330b62d8 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index b5af0819a4..81330b62d8 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h index 421c5d8a63..504c360e64 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h index a2503d7775..1a3836bb34 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h index cc283de141..3ccddfceac 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h +++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h index a976a8f85a..1e2bb02032 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h index b48a6df543..4b11a671c0 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 13ddfa6e40..f2aab2763a 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h index d03684dd99..bc098e550f 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h @@ -1639,10 +1639,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h index 3c6581d54d..f4ae7d1ab1 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h +++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h index 8a66c67d31..163f8a315c 100644 --- a/Marlin/src/config/examples/SCARA/Configuration_adv.h +++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h index 7ca56885ee..53cbde691c 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h index 1781438485..4d764451b2 100644 --- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h +++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h index a765eb8ea8..80def61ffc 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h index 2af52d8085..825c1c4223 100644 --- a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h index b91db7dc78..558e54bd82 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h index fefea93b8f..8e10015517 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h @@ -1644,10 +1644,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h index 6bcefdb221..a98a311be1 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 5634d07834..55aea01c86 100644 --- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -1633,10 +1633,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 5ab1d9b45b..53359069d8 100644 --- a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -1633,10 +1633,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 287752ce9e..f3915deecc 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1633,10 +1633,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 287752ce9e..f3915deecc 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -1633,10 +1633,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index d8a6bd8945..d820c66376 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1633,10 +1633,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h index d8a6bd8945..d820c66376 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h @@ -1633,10 +1633,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h index d8a6bd8945..d820c66376 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h @@ -1633,10 +1633,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h index 78220c6091..12b35e871b 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1633,10 +1633,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 2f1b6f0402..f4b2d675ed 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h index bce271926b..87e2126f70 100644 --- a/Marlin/src/config/examples/makibox/Configuration_adv.h +++ b/Marlin/src/config/examples/makibox/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h index 1d56c914e4..f50e45736c 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1631,10 +1631,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h index 5a031874ec..7eb8e301d7 100644 --- a/Marlin/src/config/examples/wt150/Configuration_adv.h +++ b/Marlin/src/config/examples/wt150/Configuration_adv.h @@ -1632,10 +1632,10 @@ #define USER_DESC_1 "Home & UBL Info" #define USER_GCODE_1 "G28\nG29 W" - #define USER_DESC_2 "Preheat for PLA" + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - #define USER_DESC_3 "Preheat for ABS" + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) #define USER_DESC_4 "Heat Bed/Home/Level" diff --git a/Marlin/src/gcode/lcd/M145.cpp b/Marlin/src/gcode/lcd/M145.cpp index c65a281b81..410d014474 100644 --- a/Marlin/src/gcode/lcd/M145.cpp +++ b/Marlin/src/gcode/lcd/M145.cpp @@ -30,7 +30,7 @@ /** * M145: Set the heatup state for a material in the LCD menu * - * S (0=PLA, 1=ABS) + * S * H * B * F diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h index abd2ec5557..da3c340235 100644 --- a/Marlin/src/inc/Conditionals_LCD.h +++ b/Marlin/src/inc/Conditionals_LCD.h @@ -525,7 +525,7 @@ #endif #ifndef PREHEAT_2_LABEL - #define PREHEAT_1_LABEL "ABS" + #define PREHEAT_2_LABEL "ABS" #endif /** diff --git a/Marlin/src/lcd/language/language_an.h b/Marlin/src/lcd/language/language_an.h index 0d0f9649e9..595ac2c314 100644 --- a/Marlin/src/lcd/language/language_an.h +++ b/Marlin/src/lcd/language/language_an.h @@ -52,12 +52,12 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Achustar desfases") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Desfase aplicau") #define MSG_SET_ORIGIN _UxGT("Establir orichen") -#define MSG_PREHEAT_1 _UxGT("Precalentar PLA") +#define MSG_PREHEAT_1 _UxGT("Precalentar " PREHEAT_1_LABEL) #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Tot") #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Base") #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" Conf") -#define MSG_PREHEAT_2 _UxGT("Precalentar ABS") +#define MSG_PREHEAT_2 _UxGT("Precalentar " PREHEAT_2_LABEL) #define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Tot") #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Base") diff --git a/Marlin/src/lcd/language/language_bg.h b/Marlin/src/lcd/language/language_bg.h index 55206ff4cc..964cc753bd 100644 --- a/Marlin/src/lcd/language/language_bg.h +++ b/Marlin/src/lcd/language/language_bg.h @@ -43,16 +43,16 @@ #define MSG_TMC_Z_CALIBRATION _UxGT("Калибровка Z") #define MSG_SET_HOME_OFFSETS _UxGT("Задай Начало") #define MSG_SET_ORIGIN _UxGT("Изходна точка") -#define MSG_PREHEAT_1 _UxGT("Подгряване PLA") -#define MSG_PREHEAT_1_N _UxGT("Подгряване PLA") -#define MSG_PREHEAT_1_ALL _UxGT("Подгр. PLA Всички") -#define MSG_PREHEAT_1_BEDONLY _UxGT("Подгр. PLA Легло") -#define MSG_PREHEAT_1_SETTINGS _UxGT("Настройки PLA") -#define MSG_PREHEAT_2 _UxGT("Подгряване ABS") -#define MSG_PREHEAT_2_N _UxGT("Подгряване ABS") -#define MSG_PREHEAT_2_ALL _UxGT("Подгр. ABS Всички") -#define MSG_PREHEAT_2_BEDONLY _UxGT("Подгр. ABS Легло") -#define MSG_PREHEAT_2_SETTINGS _UxGT("Настройки ABS") +#define MSG_PREHEAT_1 _UxGT("Подгряване " PREHEAT_1_LABEL) +#define MSG_PREHEAT_1_N _UxGT("Подгряване " PREHEAT_1_LABEL) +#define MSG_PREHEAT_1_ALL _UxGT("Подгр. " PREHEAT_1_LABEL " Всички") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Подгр. " PREHEAT_1_LABEL " Легло") +#define MSG_PREHEAT_1_SETTINGS _UxGT("Настройки " PREHEAT_1_LABEL) +#define MSG_PREHEAT_2 _UxGT("Подгряване " PREHEAT_2_LABEL) +#define MSG_PREHEAT_2_N _UxGT("Подгряване " PREHEAT_2_LABEL) +#define MSG_PREHEAT_2_ALL _UxGT("Подгр. " PREHEAT_2_LABEL " Всички") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Подгр. " PREHEAT_2_LABEL " Легло") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Настройки " PREHEAT_2_LABEL) #define MSG_COOLDOWN _UxGT("Охлаждане") #define MSG_SWITCH_PS_ON _UxGT("Вкл. захранване") #define MSG_SWITCH_PS_OFF _UxGT("Изкл. захранване") diff --git a/Marlin/src/lcd/language/language_ca.h b/Marlin/src/lcd/language/language_ca.h index 0bbe432674..b1240d7da3 100644 --- a/Marlin/src/lcd/language/language_ca.h +++ b/Marlin/src/lcd/language/language_ca.h @@ -53,12 +53,12 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Ajusta decalatge") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Decalatge aplicat") #define MSG_SET_ORIGIN _UxGT("Estableix origen") -#define MSG_PREHEAT_1 _UxGT("Preescalfa PLA") +#define MSG_PREHEAT_1 _UxGT("Preescalfa " PREHEAT_1_LABEL) #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Tot") #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Llit") #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" Conf.") -#define MSG_PREHEAT_2 _UxGT("Preescalfa ABS") +#define MSG_PREHEAT_2 _UxGT("Preescalfa " PREHEAT_2_LABEL) #define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Tot") #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Llit") diff --git a/Marlin/src/lcd/language/language_cz.h b/Marlin/src/lcd/language/language_cz.h index 01d59e6f2e..86444b57bc 100644 --- a/Marlin/src/lcd/language/language_cz.h +++ b/Marlin/src/lcd/language/language_cz.h @@ -62,13 +62,13 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Nastavit ofsety") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Ofsety nastaveny") #define MSG_SET_ORIGIN _UxGT("Nastavit počátek") -#define MSG_PREHEAT_1 _UxGT("Zahřát PLA") +#define MSG_PREHEAT_1 _UxGT("Zahřát " PREHEAT_1_LABEL) #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" vše") #define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" hotend") #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" podlož") #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" nast") -#define MSG_PREHEAT_2 _UxGT("Zahřát ABS") +#define MSG_PREHEAT_2 _UxGT("Zahřát " PREHEAT_2_LABEL) #define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" vše") #define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" hotend") @@ -97,25 +97,25 @@ #define MSG_UBL_MOVING_TO_NEXT _UxGT("Přesun na další") #define MSG_UBL_ACTIVATE_MESH _UxGT("Aktivovat UBL") #define MSG_UBL_DEACTIVATE_MESH _UxGT("Deaktivovat UBL") -#define MSG_UBL_SET_BED_TEMP _UxGT("Teplota podložky") -#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP -#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Teplota hotendu") -#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_SET_TEMP_BED _UxGT("Teplota podložky") +#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED +#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Teplota hotendu") +#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND #define MSG_UBL_MESH_EDIT _UxGT("Úprava sítě bodů") #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Upravit vlastní síť") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Doladit síť bodů") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Konec úprav sítě") -#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Vlastní síť") +#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("Vlastní síť") #define MSG_UBL_BUILD_MESH_MENU _UxGT("Vytvořit síť") -#define MSG_UBL_BUILD_PLA_MESH _UxGT("Síť bodu PLA") -#define MSG_UBL_BUILD_ABS_MESH _UxGT("Síť bodu ABS") +#define MSG_UBL_BUILD_MESH_M1 _UxGT("Síť bodu " PREHEAT_1_LABEL) +#define MSG_UBL_BUILD_MESH_M2 _UxGT("Síť bodu " PREHEAT_2_LABEL) #define MSG_UBL_BUILD_COLD_MESH _UxGT("Studená síť bodů") #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Upravit výšku sítě") #define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Výška") #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Zkontrolovat síť") -#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Kontrola sítě PLA") -#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Kontrola sítě ABS") -#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Kontrola vlast. sítě") +#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Kontrola sítě " PREHEAT_1_LABEL) +#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Kontrola sítě " PREHEAT_2_LABEL) +#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("Kontrola vlast. sítě") #define MSG_UBL_CONTINUE_MESH _UxGT("Pokračovat v síťi") #define MSG_UBL_MESH_LEVELING _UxGT("Síťové rovnání") #define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-bodove rovnání") diff --git a/Marlin/src/lcd/language/language_da.h b/Marlin/src/lcd/language/language_da.h index 838accac81..44b88de160 100644 --- a/Marlin/src/lcd/language/language_da.h +++ b/Marlin/src/lcd/language/language_da.h @@ -52,16 +52,16 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Sæt forsk. af home") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Forsk. er nu aktiv") #define MSG_SET_ORIGIN _UxGT("Sæt origin") -#define MSG_PREHEAT_1 _UxGT("Forvarm PLA") -#define MSG_PREHEAT_1_N _UxGT("Forvarm PLA ") -#define MSG_PREHEAT_1_ALL _UxGT("Forvarm PLA Alle") -#define MSG_PREHEAT_1_BEDONLY _UxGT("Forvarm PLA Bed") -#define MSG_PREHEAT_1_SETTINGS _UxGT("Forvarm PLA conf") -#define MSG_PREHEAT_2 _UxGT("Forvarm ABS") -#define MSG_PREHEAT_2_N _UxGT("Forvarm ABS ") -#define MSG_PREHEAT_2_ALL _UxGT("Forvarm ABS Alle") -#define MSG_PREHEAT_2_BEDONLY _UxGT("Forvarm ABS Bed") -#define MSG_PREHEAT_2_SETTINGS _UxGT("Forvarm ABS conf") +#define MSG_PREHEAT_1 _UxGT("Forvarm " PREHEAT_1_LABEL) +#define MSG_PREHEAT_1_N _UxGT("Forvarm " PREHEAT_1_LABEL " ") +#define MSG_PREHEAT_1_ALL _UxGT("Forvarm " PREHEAT_1_LABEL " Alle") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Forvarm " PREHEAT_1_LABEL " Bed") +#define MSG_PREHEAT_1_SETTINGS _UxGT("Forvarm " PREHEAT_1_LABEL " conf") +#define MSG_PREHEAT_2 _UxGT("Forvarm " PREHEAT_2_LABEL) +#define MSG_PREHEAT_2_N _UxGT("Forvarm " PREHEAT_2_LABEL " ") +#define MSG_PREHEAT_2_ALL _UxGT("Forvarm " PREHEAT_2_LABEL " Alle") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Forvarm " PREHEAT_2_LABEL " Bed") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Forvarm " PREHEAT_2_LABEL " conf") #define MSG_COOLDOWN _UxGT("Afkøl") #define MSG_SWITCH_PS_ON _UxGT("Slå strøm til") #define MSG_SWITCH_PS_OFF _UxGT("Slå strøm fra") diff --git a/Marlin/src/lcd/language/language_de.h b/Marlin/src/lcd/language/language_de.h index 3bc1cab1c8..fc5e599f36 100644 --- a/Marlin/src/lcd/language/language_de.h +++ b/Marlin/src/lcd/language/language_de.h @@ -60,18 +60,18 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Setze Homeversatz") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Homeversatz aktiv") #define MSG_SET_ORIGIN _UxGT("Setze Nullpunkte") //"G92 X0 Y0 Z0" commented out in ultralcd.cpp -#define MSG_PREHEAT_1 _UxGT("Vorwärmen PLA") -#define MSG_PREHEAT_1_N _UxGT("Vorwärmen PLA ") -#define MSG_PREHEAT_1_ALL _UxGT("Vorw. PLA Alles") -#define MSG_PREHEAT_1_END _UxGT("Vorw. PLA Extr.") -#define MSG_PREHEAT_1_BEDONLY _UxGT("Vorw. PLA Bett") -#define MSG_PREHEAT_1_SETTINGS _UxGT("Vorw. PLA Einst.") -#define MSG_PREHEAT_2 _UxGT("Vorwärmen ABS") -#define MSG_PREHEAT_2_N _UxGT("Vorwärmen ABS ") -#define MSG_PREHEAT_2_ALL _UxGT("Vorw. ABS Alles") -#define MSG_PREHEAT_2_END _UxGT("Vorw. ABS Extr.") -#define MSG_PREHEAT_2_BEDONLY _UxGT("Vorw. ABS Bett") -#define MSG_PREHEAT_2_SETTINGS _UxGT("Vorw. ABS Einst.") +#define MSG_PREHEAT_1 _UxGT("Vorwärmen " PREHEAT_1_LABEL) +#define MSG_PREHEAT_1_N _UxGT("Vorwärmen " PREHEAT_1_LABEL " ") +#define MSG_PREHEAT_1_ALL _UxGT("Vorw. " PREHEAT_1_LABEL " Alles") +#define MSG_PREHEAT_1_END _UxGT("Vorw. " PREHEAT_1_LABEL " Extr.") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Vorw. " PREHEAT_1_LABEL " Bett") +#define MSG_PREHEAT_1_SETTINGS _UxGT("Vorw. " PREHEAT_1_LABEL " Einst.") +#define MSG_PREHEAT_2 _UxGT("Vorwärmen " PREHEAT_2_LABEL) +#define MSG_PREHEAT_2_N _UxGT("Vorwärmen " PREHEAT_2_LABEL " ") +#define MSG_PREHEAT_2_ALL _UxGT("Vorw. " PREHEAT_2_LABEL " Alles") +#define MSG_PREHEAT_2_END _UxGT("Vorw. " PREHEAT_2_LABEL " Extr.") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Vorw. " PREHEAT_2_LABEL " Bett") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Vorw. " PREHEAT_2_LABEL " Einst.") #define MSG_PREHEAT_CUSTOM _UxGT("benutzerdef. Heizen") #define MSG_COOLDOWN _UxGT("Abkühlen") #define MSG_SWITCH_PS_ON _UxGT("Netzteil ein") @@ -105,25 +105,25 @@ #define MSG_UBL_MOVING_TO_NEXT _UxGT("Nächster Punkt...") #define MSG_UBL_ACTIVATE_MESH _UxGT("UBL aktivieren") #define MSG_UBL_DEACTIVATE_MESH _UxGT("UBL deaktivieren") -#define MSG_UBL_SET_BED_TEMP _UxGT("Betttemperatur") -#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP -#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Hotend-Temp.") -#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_SET_TEMP_BED _UxGT("Betttemperatur") +#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED +#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Hotend-Temp.") +#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND #define MSG_UBL_MESH_EDIT _UxGT("Netz bearbeiten") #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Eigenes Netz bearb.") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Feineinstellung...") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Bearbeitung beendet") -#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Eigenes Netz erst.") +#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("Eigenes Netz erst.") #define MSG_UBL_BUILD_MESH_MENU _UxGT("Netz erstellen") -#define MSG_UBL_BUILD_PLA_MESH _UxGT("Netz erstellen PLA") -#define MSG_UBL_BUILD_ABS_MESH _UxGT("Netz erstellen ABS") +#define MSG_UBL_BUILD_MESH_M1 _UxGT("Netz erstellen " PREHEAT_1_LABEL) +#define MSG_UBL_BUILD_MESH_M2 _UxGT("Netz erstellen " PREHEAT_2_LABEL) #define MSG_UBL_BUILD_COLD_MESH _UxGT("Netz erstellen kalt") #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Netzhöhe einst.") #define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Höhe") #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Netz validieren") -#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Netz validieren PLA") -#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Netz validieren ABS") -#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Eig. Netz validieren") +#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Netz validieren " PREHEAT_1_LABEL) +#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Netz validieren " PREHEAT_2_LABEL) +#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("Eig. Netz validieren") #define MSG_UBL_CONTINUE_MESH _UxGT("Netzerst. forts.") #define MSG_UBL_MESH_LEVELING _UxGT("Netz-Nivellierung") #define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-Punkt-Nivell.") diff --git a/Marlin/src/lcd/language/language_el-gr.h b/Marlin/src/lcd/language/language_el-gr.h index cc4189aa7a..b5eca8f648 100644 --- a/Marlin/src/lcd/language/language_el-gr.h +++ b/Marlin/src/lcd/language/language_el-gr.h @@ -52,12 +52,12 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Ορισμός βασικών μετατοπίσεων") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Εφαρμόστηκαν οι μετατοπίσεις") #define MSG_SET_ORIGIN _UxGT("Ορισμός προέλευσης") -#define MSG_PREHEAT_1 _UxGT("Προθέρμανση PLA") +#define MSG_PREHEAT_1 _UxGT("Προθέρμανση " PREHEAT_1_LABEL) #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" όλα") #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" κλίνη") #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" επιβεβαίωση") -#define MSG_PREHEAT_2 _UxGT("Προθέρμανση ABS") +#define MSG_PREHEAT_2 _UxGT("Προθέρμανση " PREHEAT_2_LABEL) #define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" όλα") #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Bed") diff --git a/Marlin/src/lcd/language/language_el.h b/Marlin/src/lcd/language/language_el.h index 8a9488d04d..325cebca72 100644 --- a/Marlin/src/lcd/language/language_el.h +++ b/Marlin/src/lcd/language/language_el.h @@ -52,12 +52,12 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Ορισμός βασικών μετατοπίσεων") //SHORTEN #define MSG_HOME_OFFSETS_APPLIED _UxGT("Εφαρμόστηκαν οι μετατοπίσεις") //SHORTEN #define MSG_SET_ORIGIN _UxGT("Ορισμός προέλευσης") -#define MSG_PREHEAT_1 _UxGT("Προθέρμανση PLA") +#define MSG_PREHEAT_1 _UxGT("Προθέρμανση " PREHEAT_1_LABEL) #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" όλα") #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" bed") //SHORTEN #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" επιβεβαίωση") //SHORTEN -#define MSG_PREHEAT_2 _UxGT("Προθέρμανση ABS") +#define MSG_PREHEAT_2 _UxGT("Προθέρμανση " PREHEAT_2_LABEL) #define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" όλα") #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" bed") //SHORTEN diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h index 7231095c71..815accbab5 100644 --- a/Marlin/src/lcd/language/language_en.h +++ b/Marlin/src/lcd/language/language_en.h @@ -253,17 +253,17 @@ #ifndef MSG_UBL_DEACTIVATE_MESH #define MSG_UBL_DEACTIVATE_MESH _UxGT("Deactivate UBL") #endif -#ifndef MSG_UBL_SET_BED_TEMP - #define MSG_UBL_SET_BED_TEMP _UxGT("Bed Temp") +#ifndef MSG_UBL_SET_TEMP_BED + #define MSG_UBL_SET_TEMP_BED _UxGT("Bed Temp") #endif -#ifndef MSG_UBL_CUSTOM_BED_TEMP - #define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP +#ifndef MSG_UBL_BED_TEMP_CUSTOM + #define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED #endif -#ifndef MSG_UBL_SET_HOTEND_TEMP - #define MSG_UBL_SET_HOTEND_TEMP _UxGT("Hotend Temp") +#ifndef MSG_UBL_SET_TEMP_HOTEND + #define MSG_UBL_SET_TEMP_HOTEND _UxGT("Hotend Temp") #endif -#ifndef MSG_UBL_CUSTOM_HOTEND_TEMP - #define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#ifndef MSG_UBL_HOTEND_TEMP_CUSTOM + #define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND #endif #ifndef MSG_UBL_MESH_EDIT #define MSG_UBL_MESH_EDIT _UxGT("Mesh Edit") @@ -277,17 +277,17 @@ #ifndef MSG_UBL_DONE_EDITING_MESH #define MSG_UBL_DONE_EDITING_MESH _UxGT("Done Editing Mesh") #endif -#ifndef MSG_UBL_BUILD_CUSTOM_MESH - #define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Build Custom Mesh") +#ifndef MSG_UBL_BUILD_MESH_CUSTOM + #define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("Build Custom Mesh") #endif #ifndef MSG_UBL_BUILD_MESH_MENU #define MSG_UBL_BUILD_MESH_MENU _UxGT("Build Mesh") #endif -#ifndef MSG_UBL_BUILD_PLA_MESH - #define MSG_UBL_BUILD_PLA_MESH _UxGT("Build PLA Mesh") +#ifndef MSG_UBL_BUILD_MESH_M1 + #define MSG_UBL_BUILD_MESH_M1 _UxGT("Build Mesh (" PREHEAT_1_LABEL ")") #endif -#ifndef MSG_UBL_BUILD_ABS_MESH - #define MSG_UBL_BUILD_ABS_MESH _UxGT("Build ABS Mesh") +#ifndef MSG_UBL_BUILD_MESH_M2 + #define MSG_UBL_BUILD_MESH_M2 _UxGT("Build Mesh (" PREHEAT_2_LABEL ")") #endif #ifndef MSG_UBL_BUILD_COLD_MESH #define MSG_UBL_BUILD_COLD_MESH _UxGT("Build Cold Mesh") @@ -301,14 +301,14 @@ #ifndef MSG_UBL_VALIDATE_MESH_MENU #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Validate Mesh") #endif -#ifndef MSG_UBL_VALIDATE_PLA_MESH - #define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Validate PLA Mesh") +#ifndef MSG_UBL_VALIDATE_MESH_M1 + #define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Validate Mesh (" PREHEAT_1_LABEL ")") #endif -#ifndef MSG_UBL_VALIDATE_ABS_MESH - #define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Validate ABS Mesh") +#ifndef MSG_UBL_VALIDATE_MESH_M2 + #define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Validate Mesh (" PREHEAT_2_LABEL ")") #endif -#ifndef MSG_UBL_VALIDATE_CUSTOM_MESH - #define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Validate Custom Mesh") +#ifndef MSG_UBL_VALIDATE_MESH_CUSTOM + #define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("Validate Custom Mesh") #endif #ifndef MSG_UBL_CONTINUE_MESH #define MSG_UBL_CONTINUE_MESH _UxGT("Continue Bed Mesh") diff --git a/Marlin/src/lcd/language/language_es.h b/Marlin/src/lcd/language/language_es.h index c7ae12687d..af40860838 100644 --- a/Marlin/src/lcd/language/language_es.h +++ b/Marlin/src/lcd/language/language_es.h @@ -55,13 +55,13 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Ajustar desfases") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Desfase aplicado") #define MSG_SET_ORIGIN _UxGT("Establecer origen") -#define MSG_PREHEAT_1 _UxGT("Precalentar PLA") +#define MSG_PREHEAT_1 _UxGT("Precalentar " PREHEAT_1_LABEL) #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Todo") #define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" End") #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Cama") #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" Config") -#define MSG_PREHEAT_2 _UxGT("Precalentar ABS") +#define MSG_PREHEAT_2 _UxGT("Precalentar " PREHEAT_2_LABEL) #define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Todo") #define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" End") diff --git a/Marlin/src/lcd/language/language_eu.h b/Marlin/src/lcd/language/language_eu.h index fdfd35e7ba..c242b7fc09 100644 --- a/Marlin/src/lcd/language/language_eu.h +++ b/Marlin/src/lcd/language/language_eu.h @@ -56,13 +56,13 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Etxe. offset eza.") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsetak ezarrita") #define MSG_SET_ORIGIN _UxGT("Hasiera ipini") -#define MSG_PREHEAT_1 _UxGT("Berotu PLA") +#define MSG_PREHEAT_1 _UxGT("Berotu " PREHEAT_1_LABEL) #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Guztia") #define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" Amaia") #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Ohea") #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" Ezarp.") -#define MSG_PREHEAT_2 _UxGT("Berotu ABS") +#define MSG_PREHEAT_2 _UxGT("Berotu " PREHEAT_2_LABEL) #define MSG_PREHEAT_2_N MSG_PREHEAT_1 _UxGT(" ") #define MSG_PREHEAT_2_ALL MSG_PREHEAT_1 _UxGT(" Guztia") #define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" Amaia") @@ -92,25 +92,25 @@ //#define MSG_UBL_MOVING_TO_NEXT _UxGT("Moving to next") #define MSG_UBL_ACTIVATE_MESH _UxGT("UBL aktibatu") #define MSG_UBL_DEACTIVATE_MESH _UxGT("UBL desaktibatu") -#define MSG_UBL_SET_BED_TEMP _UxGT("Ohearen tenperatura") -#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP -#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Mutur beroaren tenp.") -#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_SET_TEMP_BED _UxGT("Ohearen tenperatura") +#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED +#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Mutur beroaren tenp.") +#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND #define MSG_UBL_MESH_EDIT _UxGT("Sarea editatu") //#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Edit Custom Mesh") //#define MSG_UBL_FINE_TUNE_MESH _UxGT("Fine Tuning Mesh") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Sarea editatzea eginda") -//#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Build Custom Mesh") +//#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("Build Custom Mesh") #define MSG_UBL_BUILD_MESH_MENU _UxGT("Sarea sortu") -#define MSG_UBL_BUILD_PLA_MESH _UxGT("PLA sarea sortu") -#define MSG_UBL_BUILD_ABS_MESH _UxGT("ABS sarea sortu") +#define MSG_UBL_BUILD_MESH_M1 _UxGT(PREHEAT_1_LABEL " sarea sortu") +#define MSG_UBL_BUILD_MESH_M2 _UxGT(PREHEAT_2_LABEL " sarea sortu") #define MSG_UBL_BUILD_COLD_MESH _UxGT("Sare hotza sortu") #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Sarearen altuera doitu") //#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Height Amount") #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Sarea balioetsi") -#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("PLA sarea balioetsi") -#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("ABS sarea balioetsi") -//#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Validate Custom Mesh") +#define MSG_UBL_VALIDATE_MESH_M1 _UxGT(PREHEAT_1_LABEL " sarea balioetsi") +#define MSG_UBL_VALIDATE_MESH_M2 _UxGT(PREHEAT_2_LABEL " sarea balioetsi") +//#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("Validate Custom Mesh") #define MSG_UBL_CONTINUE_MESH _UxGT("Ohe sarea balioetsi") #define MSG_UBL_MESH_LEVELING _UxGT("Sare berdinketa") #define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3 puntuko berdinketa") diff --git a/Marlin/src/lcd/language/language_fi.h b/Marlin/src/lcd/language/language_fi.h index 6b26df4d8d..ba867871b2 100644 --- a/Marlin/src/lcd/language/language_fi.h +++ b/Marlin/src/lcd/language/language_fi.h @@ -47,16 +47,16 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Set home offsets") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets applied") #define MSG_SET_ORIGIN _UxGT("Aseta origo") -#define MSG_PREHEAT_1 _UxGT("Esilämmitä PLA") -#define MSG_PREHEAT_1_N _UxGT("Esilämmitä PLA ") -#define MSG_PREHEAT_1_ALL _UxGT("Esilä. PLA Kaikki") -#define MSG_PREHEAT_1_BEDONLY _UxGT("Esilä. PLA Alusta") -#define MSG_PREHEAT_1_SETTINGS _UxGT("Esilämm. PLA konf") -#define MSG_PREHEAT_2 _UxGT("Esilämmitä ABS") -#define MSG_PREHEAT_2_N _UxGT("Esilämmitä ABS ") -#define MSG_PREHEAT_2_ALL _UxGT("Esilä. ABS Kaikki") -#define MSG_PREHEAT_2_BEDONLY _UxGT("Esilä. ABS Alusta") -#define MSG_PREHEAT_2_SETTINGS _UxGT("Esilämm. ABS konf") +#define MSG_PREHEAT_1 _UxGT("Esilämmitä " PREHEAT_1_LABEL) +#define MSG_PREHEAT_1_N _UxGT("Esilämmitä " PREHEAT_1_LABEL " ") +#define MSG_PREHEAT_1_ALL _UxGT("Esilä. " PREHEAT_1_LABEL " Kaikki") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Esilä. " PREHEAT_1_LABEL " Alusta") +#define MSG_PREHEAT_1_SETTINGS _UxGT("Esilämm. " PREHEAT_1_LABEL " konf") +#define MSG_PREHEAT_2 _UxGT("Esilämmitä " PREHEAT_2_LABEL) +#define MSG_PREHEAT_2_N _UxGT("Esilämmitä " PREHEAT_2_LABEL " ") +#define MSG_PREHEAT_2_ALL _UxGT("Esilä. " PREHEAT_2_LABEL " Kaikki") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Esilä. " PREHEAT_2_LABEL " Alusta") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Esilämm. " PREHEAT_2_LABEL " konf") #define MSG_COOLDOWN _UxGT("Jäähdytä") #define MSG_SWITCH_PS_ON _UxGT("Virta päälle") #define MSG_SWITCH_PS_OFF _UxGT("Virta pois") diff --git a/Marlin/src/lcd/language/language_fr.h b/Marlin/src/lcd/language/language_fr.h index f45918e1b2..b3f776b15a 100644 --- a/Marlin/src/lcd/language/language_fr.h +++ b/Marlin/src/lcd/language/language_fr.h @@ -56,18 +56,18 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Régl. décal. origine") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Décalages appliqués") #define MSG_SET_ORIGIN _UxGT("Régler origine") -#define MSG_PREHEAT_1 _UxGT("Préchauffage PLA") -#define MSG_PREHEAT_1_N _UxGT("Préchauff. PLA ") -#define MSG_PREHEAT_1_ALL _UxGT("Préch. PLA Tout") +#define MSG_PREHEAT_1 _UxGT("Préchauffage " PREHEAT_1_LABEL) +#define MSG_PREHEAT_1_N _UxGT("Préchauff. " PREHEAT_1_LABEL " ") +#define MSG_PREHEAT_1_ALL _UxGT("Préch. " PREHEAT_1_LABEL " Tout") #define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" buse") -#define MSG_PREHEAT_1_BEDONLY _UxGT("Préch. PLA lit") -#define MSG_PREHEAT_1_SETTINGS _UxGT("Régl. prech. PLA") -#define MSG_PREHEAT_2 _UxGT("Préchauffage ABS") -#define MSG_PREHEAT_2_N _UxGT("Préchauff. ABS ") -#define MSG_PREHEAT_2_ALL _UxGT("Préch. ABS Tout") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Préch. " PREHEAT_1_LABEL " lit") +#define MSG_PREHEAT_1_SETTINGS _UxGT("Régl. prech. " PREHEAT_1_LABEL) +#define MSG_PREHEAT_2 _UxGT("Préchauffage " PREHEAT_2_LABEL) +#define MSG_PREHEAT_2_N _UxGT("Préchauff. " PREHEAT_2_LABEL " ") +#define MSG_PREHEAT_2_ALL _UxGT("Préch. " PREHEAT_2_LABEL " Tout") #define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" buse") -#define MSG_PREHEAT_2_BEDONLY _UxGT("Préch. ABS lit") -#define MSG_PREHEAT_2_SETTINGS _UxGT("Régl. prech. ABS") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Préch. " PREHEAT_2_LABEL " lit") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Régl. prech. " PREHEAT_2_LABEL) #define MSG_COOLDOWN _UxGT("Refroidir") #define MSG_SWITCH_PS_ON _UxGT("Allumer alim.") #define MSG_SWITCH_PS_OFF _UxGT("Eteindre alim.") @@ -92,25 +92,25 @@ #define MSG_UBL_MOVING_TO_NEXT _UxGT("Aller au suivant") #define MSG_UBL_ACTIVATE_MESH _UxGT("Activer l'UBL") #define MSG_UBL_DEACTIVATE_MESH _UxGT("Désactiver l'UBL") -#define MSG_UBL_SET_BED_TEMP _UxGT("Température lit") -#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP -#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Température buse") -#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_SET_TEMP_BED _UxGT("Température lit") +#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED +#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Température buse") +#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND #define MSG_UBL_MESH_EDIT _UxGT("Editer maille") #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Editer maille perso") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Réglage fin maille") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Terminer maille") -#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Créer maille perso") +#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("Créer maille perso") #define MSG_UBL_BUILD_MESH_MENU _UxGT("Créer maille") -#define MSG_UBL_BUILD_PLA_MESH _UxGT("Créer maille PLA") -#define MSG_UBL_BUILD_ABS_MESH _UxGT("Créer maille ABS") +#define MSG_UBL_BUILD_MESH_M1 _UxGT("Créer maille " PREHEAT_1_LABEL) +#define MSG_UBL_BUILD_MESH_M2 _UxGT("Créer maille " PREHEAT_2_LABEL) #define MSG_UBL_BUILD_COLD_MESH _UxGT("Créer maille froide") #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Ajuster haut. maille") #define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Hauteur") #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Valider maille") -#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Valider maille PLA") -#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Valider maille ABS") -#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Valider maille perso") +#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Valider maille " PREHEAT_1_LABEL) +#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Valider maille " PREHEAT_2_LABEL) +#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("Valider maille perso") #define MSG_UBL_CONTINUE_MESH _UxGT("Continuer maille") #define MSG_UBL_MESH_LEVELING _UxGT("Niveau par maille") #define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Niveau à 3 points") diff --git a/Marlin/src/lcd/language/language_gl.h b/Marlin/src/lcd/language/language_gl.h index 7160114583..2f653042f0 100644 --- a/Marlin/src/lcd/language/language_gl.h +++ b/Marlin/src/lcd/language/language_gl.h @@ -52,16 +52,16 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Offsets na orixe") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets fixados") #define MSG_SET_ORIGIN _UxGT("Fixar orixe") -#define MSG_PREHEAT_1 _UxGT("Prequentar PLA") -#define MSG_PREHEAT_1_N _UxGT("Prequentar PLA ") -#define MSG_PREHEAT_1_ALL _UxGT("Preque. PLA Todo") -#define MSG_PREHEAT_1_BEDONLY _UxGT("Preque. PLA Cama") -#define MSG_PREHEAT_1_SETTINGS _UxGT("Preque. PLA conf") -#define MSG_PREHEAT_2 _UxGT("Prequentar ABS") -#define MSG_PREHEAT_2_N _UxGT("Prequentar ABS ") -#define MSG_PREHEAT_2_ALL _UxGT("Preque. ABS Todo") -#define MSG_PREHEAT_2_BEDONLY _UxGT("Preque. ABS Cama") -#define MSG_PREHEAT_2_SETTINGS _UxGT("Preque. ABS conf") +#define MSG_PREHEAT_1 _UxGT("Prequentar " PREHEAT_1_LABEL) +#define MSG_PREHEAT_1_N _UxGT("Prequentar " PREHEAT_1_LABEL " ") +#define MSG_PREHEAT_1_ALL _UxGT("Preque. " PREHEAT_1_LABEL " Todo") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Preque. " PREHEAT_1_LABEL " Cama") +#define MSG_PREHEAT_1_SETTINGS _UxGT("Preque. " PREHEAT_1_LABEL " conf") +#define MSG_PREHEAT_2 _UxGT("Prequentar " PREHEAT_2_LABEL) +#define MSG_PREHEAT_2_N _UxGT("Prequentar " PREHEAT_2_LABEL " ") +#define MSG_PREHEAT_2_ALL _UxGT("Preque. " PREHEAT_2_LABEL " Todo") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Preque. " PREHEAT_2_LABEL " Cama") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Preque. " PREHEAT_2_LABEL " conf") #define MSG_COOLDOWN _UxGT("Arrefriar") #define MSG_SWITCH_PS_ON _UxGT("Acender") #define MSG_SWITCH_PS_OFF _UxGT("Apagar") diff --git a/Marlin/src/lcd/language/language_hr.h b/Marlin/src/lcd/language/language_hr.h index 1a13d8f9e5..b4b64a66aa 100644 --- a/Marlin/src/lcd/language/language_hr.h +++ b/Marlin/src/lcd/language/language_hr.h @@ -52,12 +52,12 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Postavi home offsete") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets postavljeni") #define MSG_SET_ORIGIN _UxGT("Postavi ishodište") -#define MSG_PREHEAT_1 _UxGT("Predgrij PLA") +#define MSG_PREHEAT_1 _UxGT("Predgrij " PREHEAT_1_LABEL) #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Sve") #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Bed") #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" conf") -#define MSG_PREHEAT_2 _UxGT("Predgrij ABS") +#define MSG_PREHEAT_2 _UxGT("Predgrij " PREHEAT_2_LABEL) #define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Sve") #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Bed") diff --git a/Marlin/src/lcd/language/language_it.h b/Marlin/src/lcd/language/language_it.h index aa3b53ad1f..fe6bbbf6ad 100644 --- a/Marlin/src/lcd/language/language_it.h +++ b/Marlin/src/lcd/language/language_it.h @@ -58,14 +58,14 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Imp. offset home") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Offset applicato") #define MSG_SET_ORIGIN _UxGT("Imposta Origine") -#define MSG_PREHEAT_1 _UxGT("Preriscalda PLA") -#define MSG_PREHEAT_1_N _UxGT("Preris.PLA ") +#define MSG_PREHEAT_1 _UxGT("Preriscalda " PREHEAT_1_LABEL) +#define MSG_PREHEAT_1_N _UxGT("Preris." PREHEAT_1_LABEL " ") #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1_N _UxGT("Tutto") #define MSG_PREHEAT_1_END MSG_PREHEAT_1_N _UxGT("Ugello") #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1_N _UxGT("Piatto") #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1_N _UxGT("conf") -#define MSG_PREHEAT_2 _UxGT("Preriscalda ABS") -#define MSG_PREHEAT_2_N _UxGT("Preris.ABS ") +#define MSG_PREHEAT_2 _UxGT("Preriscalda " PREHEAT_2_LABEL) +#define MSG_PREHEAT_2_N _UxGT("Preris." PREHEAT_2_LABEL " ") #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2_N _UxGT("Tutto") #define MSG_PREHEAT_2_END MSG_PREHEAT_2_N _UxGT("Ugello") #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2_N _UxGT("Piatto") @@ -103,25 +103,25 @@ #define MSG_UBL_MOVING_TO_NEXT _UxGT("Spostamento succes.") #define MSG_UBL_ACTIVATE_MESH _UxGT("Attiva UBL") #define MSG_UBL_DEACTIVATE_MESH _UxGT("Disattiva UBL") -#define MSG_UBL_SET_BED_TEMP _UxGT("Temp. Piatto") -#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP -#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Temp. Ugello") -#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_SET_TEMP_BED _UxGT("Temp. Piatto") +#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED +#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Temp. Ugello") +#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND #define MSG_UBL_MESH_EDIT _UxGT("Modifica Mesh") #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Modif.Mesh personal.") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Ritocca Mesh") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Modif.Mesh fatta") -#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Crea Mesh personal.") +#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("Crea Mesh personal.") #define MSG_UBL_BUILD_MESH_MENU _UxGT("Crea Mesh") -#define MSG_UBL_BUILD_PLA_MESH _UxGT("Crea Mesh PLA") -#define MSG_UBL_BUILD_ABS_MESH _UxGT("Crea Mesh ABS") +#define MSG_UBL_BUILD_MESH_M1 _UxGT("Crea Mesh " PREHEAT_1_LABEL) +#define MSG_UBL_BUILD_MESH_M2 _UxGT("Crea Mesh " PREHEAT_2_LABEL) #define MSG_UBL_BUILD_COLD_MESH _UxGT("Crea Mesh a freddo") #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Aggiusta Alt. Mesh") #define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Altezza") #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Valida Mesh") -#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Valida Mesh PLA") -#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Valida Mesh ABS") -#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Valida Mesh pers.") +#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Valida Mesh " PREHEAT_1_LABEL) +#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Valida Mesh " PREHEAT_2_LABEL) +#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("Valida Mesh pers.") #define MSG_UBL_CONTINUE_MESH _UxGT("Continua Mesh") #define MSG_UBL_MESH_LEVELING _UxGT("Livell. Mesh") #define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Livell. 3 Punti") diff --git a/Marlin/src/lcd/language/language_jp-kana.h b/Marlin/src/lcd/language/language_jp-kana.h index 726369f9ff..dfd83e5fa5 100644 --- a/Marlin/src/lcd/language/language_jp-kana.h +++ b/Marlin/src/lcd/language/language_jp-kana.h @@ -60,12 +60,12 @@ #define MSG_SET_HOME_OFFSETS _UxGT("キジュンオフセットセッテイ") // "Set home offsets" #define MSG_HOME_OFFSETS_APPLIED _UxGT("オフセットガテキヨウサレマシタ") // "Offsets applied" #define MSG_SET_ORIGIN _UxGT("キジュンセット") // "Set origin" -#define MSG_PREHEAT_1 _UxGT(PREHEAT_1_LABEL " ヨネツ") // "Preheat PLA" +#define MSG_PREHEAT_1 _UxGT(PREHEAT_1_LABEL " ヨネツ") // "Preheat " PREHEAT_1_LABEL #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") #define MSG_PREHEAT_1_ALL _UxGT(PREHEAT_1_LABEL " スベテヨネツ") // " All" #define MSG_PREHEAT_1_BEDONLY _UxGT(PREHEAT_1_LABEL " ベッドヨネツ") // " Bed" #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT("セッテイ") // " conf" -#define MSG_PREHEAT_2 _UxGT(PREHEAT_2_LABEL " ヨネツ") // "Preheat ABS" +#define MSG_PREHEAT_2 _UxGT(PREHEAT_2_LABEL " ヨネツ") // "Preheat " PREHEAT_2_LABEL #define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") #define MSG_PREHEAT_2_ALL _UxGT(PREHEAT_2_LABEL " スベテヨネツ") // " All" #define MSG_PREHEAT_2_BEDONLY _UxGT(PREHEAT_2_LABEL " ベッドヨネツ") // " Bed" diff --git a/Marlin/src/lcd/language/language_ko_KR.h b/Marlin/src/lcd/language/language_ko_KR.h index 54cf493cd1..3371729643 100644 --- a/Marlin/src/lcd/language/language_ko_KR.h +++ b/Marlin/src/lcd/language/language_ko_KR.h @@ -58,13 +58,13 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Set home offsets") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets applied") #define MSG_SET_ORIGIN _UxGT("Set origin") -#define MSG_PREHEAT_1 _UxGT("예열하기 - PLA") +#define MSG_PREHEAT_1 _UxGT("예열하기 - " PREHEAT_1_LABEL) #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" 모두") #define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" 노즐만") #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" 베드만") #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" conf") -#define MSG_PREHEAT_2 _UxGT("예열하기 - ABS") +#define MSG_PREHEAT_2 _UxGT("예열하기 - " PREHEAT_2_LABEL) #define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" 모두") #define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" 노즐만") @@ -103,25 +103,25 @@ #define MSG_UBL_MOVING_TO_NEXT _UxGT("Moving to next") #define MSG_UBL_ACTIVATE_MESH _UxGT("Activate UBL") #define MSG_UBL_DEACTIVATE_MESH _UxGT("Deactivate UBL") -#define MSG_UBL_SET_BED_TEMP _UxGT("Bed Temp") -#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP -#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Hotend Temp") -#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_SET_TEMP_BED _UxGT("Bed Temp") +#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED +#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Hotend Temp") +#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND #define MSG_UBL_MESH_EDIT _UxGT("Mesh Edit") #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Edit Custom Mesh") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Fine Tuning Mesh") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Done Editing Mesh") -#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Build Custom Mesh") +#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("Build Custom Mesh") #define MSG_UBL_BUILD_MESH_MENU _UxGT("Build Mesh") -#define MSG_UBL_BUILD_PLA_MESH _UxGT("Build PLA Mesh") -#define MSG_UBL_BUILD_ABS_MESH _UxGT("Build ABS Mesh") +#define MSG_UBL_BUILD_MESH_M1 _UxGT("Build Mesh (" PREHEAT_1_LABEL ")") +#define MSG_UBL_BUILD_MESH_M2 _UxGT("Build Mesh (" PREHEAT_2_LABEL ")") #define MSG_UBL_BUILD_COLD_MESH _UxGT("Build Cold Mesh") #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Adjust Mesh Height") #define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Height Amount") #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Validate Mesh") -#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Validate PLA Mesh") -#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Validate ABS Mesh") -#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Validate Custom Mesh") +#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Validate " PREHEAT_1_LABEL " Mesh") +#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Validate Mesh (" PREHEAT_2_LABEL ")") +#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("Validate Custom Mesh") #define MSG_UBL_CONTINUE_MESH _UxGT("Continue Bed Mesh") #define MSG_UBL_MESH_LEVELING _UxGT("Mesh Leveling") #define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-Point Leveling") diff --git a/Marlin/src/lcd/language/language_nl.h b/Marlin/src/lcd/language/language_nl.h index 7f3484aae1..dfc0846fae 100644 --- a/Marlin/src/lcd/language/language_nl.h +++ b/Marlin/src/lcd/language/language_nl.h @@ -55,18 +55,18 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Zet home offsets") #define MSG_HOME_OFFSETS_APPLIED _UxGT("H offset toegep.") #define MSG_SET_ORIGIN _UxGT("Nulpunt instellen") -#define MSG_PREHEAT_1 _UxGT("PLA voorverwarmen") -#define MSG_PREHEAT_1_N _UxGT("PLA voorverw. ") +#define MSG_PREHEAT_1 _UxGT(PREHEAT_1_LABEL " voorverwarmen") +#define MSG_PREHEAT_1_N _UxGT(PREHEAT_1_LABEL " voorverw. ") #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1_N _UxGT("aan") #define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" Einde") #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1_N _UxGT("Bed") -#define MSG_PREHEAT_1_SETTINGS _UxGT("PLA verw. conf") -#define MSG_PREHEAT_2 _UxGT("ABS voorverwarmen") -#define MSG_PREHEAT_2_N _UxGT("ABS voorverw. ") +#define MSG_PREHEAT_1_SETTINGS _UxGT(PREHEAT_1_LABEL " verw. conf") +#define MSG_PREHEAT_2 _UxGT(PREHEAT_2_LABEL " voorverwarmen") +#define MSG_PREHEAT_2_N _UxGT(PREHEAT_2_LABEL " voorverw. ") #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2_N _UxGT("aan") #define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" Einde") #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2_N _UxGT("Bed") -#define MSG_PREHEAT_2_SETTINGS _UxGT("ABS verw. conf") +#define MSG_PREHEAT_2_SETTINGS _UxGT(PREHEAT_2_LABEL " verw. conf") #define MSG_COOLDOWN _UxGT("Afkoelen") #define MSG_SWITCH_PS_ON _UxGT("Stroom aan") #define MSG_SWITCH_PS_OFF _UxGT("Stroom uit") diff --git a/Marlin/src/lcd/language/language_pl.h b/Marlin/src/lcd/language/language_pl.h index 56880c708d..b107a3062e 100644 --- a/Marlin/src/lcd/language/language_pl.h +++ b/Marlin/src/lcd/language/language_pl.h @@ -52,16 +52,16 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Ust. poz. zer.") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Poz. zerowa ust.") #define MSG_SET_ORIGIN _UxGT("Ustaw punkt zero") -#define MSG_PREHEAT_1 _UxGT("Rozgrzej PLA") +#define MSG_PREHEAT_1 _UxGT("Rozgrzej " PREHEAT_1_LABEL) #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" wsz.") -#define MSG_PREHEAT_1_BEDONLY _UxGT("Rozgrzej stół PLA") -#define MSG_PREHEAT_1_SETTINGS _UxGT("Ustaw. rozg. PLA") -#define MSG_PREHEAT_2 _UxGT("Rozgrzej ABS") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Rozgrzej stół " PREHEAT_1_LABEL) +#define MSG_PREHEAT_1_SETTINGS _UxGT("Ustaw. rozg. " PREHEAT_1_LABEL) +#define MSG_PREHEAT_2 _UxGT("Rozgrzej " PREHEAT_2_LABEL) #define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" wsz.") -#define MSG_PREHEAT_2_BEDONLY _UxGT("Rozgrzej stół ABS") -#define MSG_PREHEAT_2_SETTINGS _UxGT("Ustaw. rozg. ABS") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Rozgrzej stół " PREHEAT_2_LABEL) +#define MSG_PREHEAT_2_SETTINGS _UxGT("Ustaw. rozg. " PREHEAT_2_LABEL) #define MSG_COOLDOWN _UxGT("Chłodzenie") #define MSG_SWITCH_PS_ON _UxGT("Włącz zasilacz") #define MSG_SWITCH_PS_OFF _UxGT("Wyłącz zasilacz") diff --git a/Marlin/src/lcd/language/language_pt-br.h b/Marlin/src/lcd/language/language_pt-br.h index b7fb588513..577194e008 100644 --- a/Marlin/src/lcd/language/language_pt-br.h +++ b/Marlin/src/lcd/language/language_pt-br.h @@ -60,18 +60,18 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Compensar origem") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Alteração feita") #define MSG_SET_ORIGIN _UxGT("Ajustar Origem") -#define MSG_PREHEAT_1 _UxGT("Pre-aquecer PLA") +#define MSG_PREHEAT_1 _UxGT("Pre-aquecer " PREHEAT_1_LABEL) #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") -#define MSG_PREHEAT_1_ALL _UxGT("Pre-aq.Todo PLA") +#define MSG_PREHEAT_1_ALL _UxGT("Pre-aq.Todo " PREHEAT_1_LABEL) #define MSG_PREHEAT_1_END _UxGT("Pre-aq.Extrusora") -#define MSG_PREHEAT_1_BEDONLY _UxGT("Pre-aq.Mesa PLA") -#define MSG_PREHEAT_1_SETTINGS _UxGT("Ajustar PLA") -#define MSG_PREHEAT_2 _UxGT("Pre-aquecer ABS") -#define MSG_PREHEAT_2_N _UxGT("Pre-aquecer ABS") -#define MSG_PREHEAT_2_ALL _UxGT("Pre-aq.Todo ABS") -#define MSG_PREHEAT_2_BEDONLY _UxGT("Pre-aq.Mesa ABS") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Pre-aq.Mesa " PREHEAT_1_LABEL) +#define MSG_PREHEAT_1_SETTINGS _UxGT("Ajustar " PREHEAT_1_LABEL) +#define MSG_PREHEAT_2 _UxGT("Pre-aquecer " PREHEAT_2_LABEL) +#define MSG_PREHEAT_2_N _UxGT("Pre-aquecer " PREHEAT_2_LABEL) +#define MSG_PREHEAT_2_ALL _UxGT("Pre-aq.Todo " PREHEAT_2_LABEL) +#define MSG_PREHEAT_2_BEDONLY _UxGT("Pre-aq.Mesa " PREHEAT_2_LABEL) #define MSG_PREHEAT_2_END _UxGT("Pre-aq.Extrusora") -#define MSG_PREHEAT_2_SETTINGS _UxGT("Ajustar ABS") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Ajustar " PREHEAT_2_LABEL) #define MSG_COOLDOWN _UxGT("Esfriar") #define MSG_SWITCH_PS_ON _UxGT("Ligar") #define MSG_SWITCH_PS_OFF _UxGT("Desligar") @@ -97,25 +97,25 @@ #define MSG_UBL_MOVING_TO_NEXT _UxGT("Indo para o Próximo") #define MSG_UBL_ACTIVATE_MESH _UxGT("Ativar UBL") #define MSG_UBL_DEACTIVATE_MESH _UxGT("Desativar UBL") -#define MSG_UBL_SET_BED_TEMP _UxGT("Temp. Mesa") -#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP -#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Temp. Extrusora") -#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_SET_TEMP_BED _UxGT("Temp. Mesa") +#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED +#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Temp. Extrusora") +#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND #define MSG_UBL_MESH_EDIT _UxGT("Editar Malha") #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Editar Malha Custom") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Ajuste Fino da Malha") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Fim da Edição") -#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Montar Customi") +#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("Montar Customi") #define MSG_UBL_BUILD_MESH_MENU _UxGT("Montar ") -#define MSG_UBL_BUILD_PLA_MESH _UxGT("Montar PLA") -#define MSG_UBL_BUILD_ABS_MESH _UxGT("Montar ABS") +#define MSG_UBL_BUILD_MESH_M1 _UxGT("Montar " PREHEAT_1_LABEL) +#define MSG_UBL_BUILD_MESH_M2 _UxGT("Montar " PREHEAT_2_LABEL) #define MSG_UBL_BUILD_COLD_MESH _UxGT("Montar fria") #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Ajustar Altura") #define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Tamanho da Elevação") #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Validar Malha") -#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Checar PLA") -#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Checar ABS") -#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Validar Malha Custom") +#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Checar " PREHEAT_1_LABEL) +#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Checar " PREHEAT_2_LABEL) +#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("Validar Malha Custom") #define MSG_UBL_CONTINUE_MESH _UxGT("Continuar Malha") #define MSG_UBL_MESH_LEVELING _UxGT("Nivelação da Malha") #define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Nivelação 3 pontos") diff --git a/Marlin/src/lcd/language/language_pt.h b/Marlin/src/lcd/language/language_pt.h index 6d1ef8ed98..5353aada4c 100644 --- a/Marlin/src/lcd/language/language_pt.h +++ b/Marlin/src/lcd/language/language_pt.h @@ -52,16 +52,16 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Definir desvio") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets aplicados") #define MSG_SET_ORIGIN _UxGT("Definir origem") -#define MSG_PREHEAT_1 _UxGT("Pre-aquecer PLA") -#define MSG_PREHEAT_1_N _UxGT("Pre-aquecer PLA") -#define MSG_PREHEAT_1_ALL _UxGT("Pre-aq. PLA Tudo") -#define MSG_PREHEAT_1_BEDONLY _UxGT("Pre-aq. PLA ") LCD_STR_THERMOMETER _UxGT("Base") -#define MSG_PREHEAT_1_SETTINGS _UxGT("Definições PLA") -#define MSG_PREHEAT_2 _UxGT("Pre-aquecer ABS") -#define MSG_PREHEAT_2_N _UxGT("Pre-aquecer ABS ") -#define MSG_PREHEAT_2_ALL _UxGT("Pre-aq. ABS Tudo") -#define MSG_PREHEAT_2_BEDONLY _UxGT("Pre-aq. ABS ") LCD_STR_THERMOMETER _UxGT("Base") -#define MSG_PREHEAT_2_SETTINGS _UxGT("Definições ABS") +#define MSG_PREHEAT_1 _UxGT("Pre-aquecer " PREHEAT_1_LABEL) +#define MSG_PREHEAT_1_N _UxGT("Pre-aquecer " PREHEAT_1_LABEL) +#define MSG_PREHEAT_1_ALL _UxGT("Pre-aq. " PREHEAT_1_LABEL " Tudo") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Pre-aq. " PREHEAT_1_LABEL " ") LCD_STR_THERMOMETER _UxGT("Base") +#define MSG_PREHEAT_1_SETTINGS _UxGT("Definições " PREHEAT_1_LABEL) +#define MSG_PREHEAT_2 _UxGT("Pre-aquecer " PREHEAT_2_LABEL) +#define MSG_PREHEAT_2_N _UxGT("Pre-aquecer " PREHEAT_2_LABEL " ") +#define MSG_PREHEAT_2_ALL _UxGT("Pre-aq. " PREHEAT_2_LABEL " Tudo") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Pre-aq. " PREHEAT_2_LABEL " ") LCD_STR_THERMOMETER _UxGT("Base") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Definições " PREHEAT_2_LABEL) #define MSG_COOLDOWN _UxGT("Arrefecer") #define MSG_SWITCH_PS_ON _UxGT("Ligar") #define MSG_SWITCH_PS_OFF _UxGT("Desligar") diff --git a/Marlin/src/lcd/language/language_ru.h b/Marlin/src/lcd/language/language_ru.h index 8637493403..61335bae1c 100644 --- a/Marlin/src/lcd/language/language_ru.h +++ b/Marlin/src/lcd/language/language_ru.h @@ -57,13 +57,13 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Запомнить парковку") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Коррекции применены") #define MSG_SET_ORIGIN _UxGT("Запомнить ноль") -#define MSG_PREHEAT_1 _UxGT("Преднагрев PLA") +#define MSG_PREHEAT_1 _UxGT("Преднагрев " PREHEAT_1_LABEL) #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" всё") #define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" сопло") #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" стол") #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" настр.") -#define MSG_PREHEAT_2 _UxGT("Преднагрев ABS") +#define MSG_PREHEAT_2 _UxGT("Преднагрев " PREHEAT_2_LABEL) #define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" всё") #define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" сопло") @@ -93,25 +93,25 @@ #define MSG_UBL_MOVING_TO_NEXT _UxGT("Двигаемся дальше") #define MSG_UBL_ACTIVATE_MESH _UxGT("Активировать UBL") #define MSG_UBL_DEACTIVATE_MESH _UxGT("Деактивировать UBL") -#define MSG_UBL_SET_BED_TEMP _UxGT("Температура стола") -#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP -#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Температура сопла") -#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_SET_TEMP_BED _UxGT("Температура стола") +#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED +#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Температура сопла") +#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND #define MSG_UBL_MESH_EDIT _UxGT("Редактор сеток") #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Редакт. свою сетку") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Точная настр. сетки") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Ред. сетки завершено") -#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Построить свою сетку") +#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("Построить свою сетку") #define MSG_UBL_BUILD_MESH_MENU _UxGT("Построить сетку") -#define MSG_UBL_BUILD_PLA_MESH _UxGT("Построить сетку PLA") -#define MSG_UBL_BUILD_ABS_MESH _UxGT("Построить сетку ABS") +#define MSG_UBL_BUILD_MESH_M1 _UxGT("Построить сетку " PREHEAT_1_LABEL) +#define MSG_UBL_BUILD_MESH_M2 _UxGT("Построить сетку " PREHEAT_2_LABEL) #define MSG_UBL_BUILD_COLD_MESH _UxGT("Построить хол. сетку") #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Устан. высоту сетки") #define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Высота") #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Проверить сетку") -#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Проверить сетку PLA") -#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Проверить сетку ABS") -#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Проверить свою сетку") +#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Проверить сетку " PREHEAT_1_LABEL) +#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Проверить сетку " PREHEAT_2_LABEL) +#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("Проверить свою сетку") #define MSG_UBL_CONTINUE_MESH _UxGT("Продолжить сетку") #define MSG_UBL_MESH_LEVELING _UxGT("Калибровка сетки") #define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Калибровка 3-х точек") diff --git a/Marlin/src/lcd/language/language_sk.h b/Marlin/src/lcd/language/language_sk.h index 980f06385c..d7215f019d 100644 --- a/Marlin/src/lcd/language/language_sk.h +++ b/Marlin/src/lcd/language/language_sk.h @@ -69,13 +69,13 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Nastaviť offsety") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsety nastavené") #define MSG_SET_ORIGIN _UxGT("Nastaviť začiatok") -#define MSG_PREHEAT_1 _UxGT("Zahriať PLA") +#define MSG_PREHEAT_1 _UxGT("Zahriať " PREHEAT_1_LABEL) #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" všetko") #define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" hotend") #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" podlož") #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" nast.") -#define MSG_PREHEAT_2 _UxGT("Zahriať ABS") +#define MSG_PREHEAT_2 _UxGT("Zahriať " PREHEAT_2_LABEL) #define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" všetko") #define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" hotend") @@ -115,25 +115,25 @@ #define MSG_UBL_MOVING_TO_NEXT _UxGT("Presun na ďalší") #define MSG_UBL_ACTIVATE_MESH _UxGT("Aktivovať UBL") #define MSG_UBL_DEACTIVATE_MESH _UxGT("Deaktivovať UBL") -#define MSG_UBL_SET_BED_TEMP _UxGT("Teplota podložky") -#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP -#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Teplota hotendu") -#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_SET_TEMP_BED _UxGT("Teplota podložky") +#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED +#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Teplota hotendu") +#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND #define MSG_UBL_MESH_EDIT _UxGT("Úprava siete bodov") #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Upraviť vlastnú sieť") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Doladiť sieť bodov") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Koniec úprav siete") -#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Vlastná sieť") +#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("Vlastná sieť") #define MSG_UBL_BUILD_MESH_MENU _UxGT("Vytvoriť sieť") -#define MSG_UBL_BUILD_PLA_MESH _UxGT("Sieť bodov PLA") -#define MSG_UBL_BUILD_ABS_MESH _UxGT("Sieť bodov ABS") +#define MSG_UBL_BUILD_MESH_M1 _UxGT("Sieť bodov " PREHEAT_1_LABEL) +#define MSG_UBL_BUILD_MESH_M2 _UxGT("Sieť bodov " PREHEAT_2_LABEL) #define MSG_UBL_BUILD_COLD_MESH _UxGT("Studená sieť bodov") #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Upraviť výšku siete") #define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Výška") #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Skontrolovať sieť") -#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Kontrola siete PLA") -#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Kontrola siete ABS") -#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Kontrola vlast.siete") +#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Kontrola siete " PREHEAT_1_LABEL) +#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Kontrola siete " PREHEAT_2_LABEL) +#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("Kontrola vlast.siete") #define MSG_UBL_CONTINUE_MESH _UxGT("Pokračovať v sieti") #define MSG_UBL_MESH_LEVELING _UxGT("Sieťové rovnanie") #define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-bodové rovnanie") diff --git a/Marlin/src/lcd/language/language_tr.h b/Marlin/src/lcd/language/language_tr.h index 613977fbb1..eaee42d676 100644 --- a/Marlin/src/lcd/language/language_tr.h +++ b/Marlin/src/lcd/language/language_tr.h @@ -55,13 +55,13 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Offset Ayarla") // Offset Ayarla #define MSG_HOME_OFFSETS_APPLIED _UxGT("Offset Tamam") // Offset Tamam #define MSG_SET_ORIGIN _UxGT("Sıfır Belirle") // Sıfır Belirle -#define MSG_PREHEAT_1 _UxGT("Ön Isınma PLA") // Ön Isınma PLA +#define MSG_PREHEAT_1 _UxGT("Ön Isınma " PREHEAT_1_LABEL) // Ön Isınma PREHEAT_1_LABEL #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") // #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Tüm") // Tüm #define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" Nozül") // Nozül #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Tabla") // Tabla #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" Ayar") // Ayar -#define MSG_PREHEAT_2 _UxGT("Ön Isınma ABS") // Ön Isınma ABS +#define MSG_PREHEAT_2 _UxGT("Ön Isınma " PREHEAT_2_LABEL) // Ön Isınma PREHEAT_2_LABEL #define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") // #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Tüm") // Tüm #define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" Nozül") // Nozül diff --git a/Marlin/src/lcd/language/language_uk.h b/Marlin/src/lcd/language/language_uk.h index 6236320589..6acb49bc42 100644 --- a/Marlin/src/lcd/language/language_uk.h +++ b/Marlin/src/lcd/language/language_uk.h @@ -52,12 +52,12 @@ #define MSG_SET_HOME_OFFSETS _UxGT("Зберегти паркув.") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Зміщення застос.") #define MSG_SET_ORIGIN _UxGT("Встанов. початок") -#define MSG_PREHEAT_1 _UxGT("Нагрів PLA") +#define MSG_PREHEAT_1 _UxGT("Нагрів " PREHEAT_1_LABEL) #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Все") #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Стіл") #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" нал.") -#define MSG_PREHEAT_2 _UxGT("Нагрів ABS") +#define MSG_PREHEAT_2 _UxGT("Нагрів " PREHEAT_2_LABEL) #define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Все") #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Стіл") diff --git a/Marlin/src/lcd/language/language_zh_CN.h b/Marlin/src/lcd/language/language_zh_CN.h index c1f130a8e9..d104dcd3ae 100644 --- a/Marlin/src/lcd/language/language_zh_CN.h +++ b/Marlin/src/lcd/language/language_zh_CN.h @@ -57,12 +57,12 @@ #define MSG_SET_HOME_OFFSETS _UxGT("设置原点偏移") //"Set home offsets" #define MSG_HOME_OFFSETS_APPLIED _UxGT("偏移已启用") //"Offsets applied" #define MSG_SET_ORIGIN _UxGT("设置原点") //"Set origin" -#define MSG_PREHEAT_1 _UxGT("预热" PREHEAT_1_LABEL) //"Preheat PLA" +#define MSG_PREHEAT_1 _UxGT("预热" PREHEAT_1_LABEL) //"Preheat PREHEAT_2_LABEL" #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") //MSG_PREHEAT_1 " " #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" 全部") //MSG_PREHEAT_1 " All" #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" 热床") //MSG_PREHEAT_1 " Bed" #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" 设置") //MSG_PREHEAT_1 " conf" -#define MSG_PREHEAT_2 _UxGT("预热" PREHEAT_2_LABEL) //"Preheat ABS" +#define MSG_PREHEAT_2 _UxGT("预热" PREHEAT_2_LABEL) //"Preheat PREHEAT_2_LABEL" #define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") //MSG_PREHEAT_2 " " #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" 全部") //MSG_PREHEAT_2 " All" #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" 热床") //MSG_PREHEAT_2 " Bed" @@ -93,23 +93,23 @@ #define MSG_UBL_MOVING_TO_NEXT _UxGT("移动到下一个") // "Moving to next" #define MSG_UBL_ACTIVATE_MESH _UxGT("激活UBL") // "Activate UBL" #define MSG_UBL_DEACTIVATE_MESH _UxGT("关闭UBL") // "Deactivate UBL" -#define MSG_UBL_SET_BED_TEMP _UxGT("设置热床温度") // "Bed Temp" -#define MSG_UBL_SET_HOTEND_TEMP _UxGT("热端温度") // "Hotend Temp" +#define MSG_UBL_SET_TEMP_BED _UxGT("设置热床温度") // "Bed Temp" +#define MSG_UBL_SET_TEMP_HOTEND _UxGT("热端温度") // "Hotend Temp" #define MSG_UBL_MESH_EDIT _UxGT("网格编辑") // "Mesh Edit" #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("编辑客户网格") // "Edit Custom Mesh" #define MSG_UBL_FINE_TUNE_MESH _UxGT("细调网格") // "Fine Tuning Mesh" #define MSG_UBL_DONE_EDITING_MESH _UxGT("完成编辑网格") // "Done Editing Mesh" -#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("创设客户网格") // "Build Custom Mesh" +#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("创设客户网格") // "Build Custom Mesh" #define MSG_UBL_BUILD_MESH_MENU _UxGT("创设网格") // "Build Mesh" -#define MSG_UBL_BUILD_PLA_MESH _UxGT("创设PLA网格") // "Build PLA Mesh" -#define MSG_UBL_BUILD_ABS_MESH _UxGT("创设ABS网格") // "Build ABS Mesh" +#define MSG_UBL_BUILD_MESH_M1 _UxGT("创设" PREHEAT_1_LABEL "网格") // "Build PREHEAT_1_LABEL Mesh" +#define MSG_UBL_BUILD_MESH_M2 _UxGT("创设" PREHEAT_2_LABEL "网格") // "Build PREHEAT_2_LABEL Mesh" #define MSG_UBL_BUILD_COLD_MESH _UxGT("创设冷网格") // "Build Cold Mesh" #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("调整网格高度") // "Adjust Mesh Height" #define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("高度合计") // "Height Amount" #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("批准网格") // "Validate Mesh" -#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("批准PLA网格") // "Validate PLA Mesh" -#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("批准ABS网格") // "Validate ABS Mesh" -#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("批准客户网格") // "Validate Custom Mesh" +#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("批准" PREHEAT_1_LABEL "网格") // "Validate PREHEAT_1_LABEL Mesh" +#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("批准" PREHEAT_2_LABEL "网格") // "Validate PREHEAT_2_LABEL Mesh" +#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("批准客户网格") // "Validate Custom Mesh" #define MSG_UBL_CONTINUE_MESH _UxGT("继续热床网格") // "Continue Bed Mesh" #define MSG_UBL_MESH_LEVELING _UxGT("网格调平") // "Mesh Leveling" #define MSG_UBL_3POINT_MESH_LEVELING _UxGT("三点调平") // "3-Point Leveling" diff --git a/Marlin/src/lcd/language/language_zh_TW.h b/Marlin/src/lcd/language/language_zh_TW.h index 89f04f7470..e795afed87 100644 --- a/Marlin/src/lcd/language/language_zh_TW.h +++ b/Marlin/src/lcd/language/language_zh_TW.h @@ -57,12 +57,12 @@ #define MSG_SET_HOME_OFFSETS _UxGT("設置原點偏移") //"Set home offsets" #define MSG_HOME_OFFSETS_APPLIED _UxGT("偏移已啟用") //"Offsets applied" #define MSG_SET_ORIGIN _UxGT("設置原點") //"Set origin" -#define MSG_PREHEAT_1 _UxGT("預熱PLA") //"Preheat PLA" +#define MSG_PREHEAT_1 _UxGT("預熱" PREHEAT_1_LABEL) //"Preheat PREHEAT_1_LABEL" #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") //MSG_PREHEAT_1 " " #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" 全部") //MSG_PREHEAT_1 " All" #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" 熱床") //MSG_PREHEAT_1 " Bed" #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" 設置") //MSG_PREHEAT_1 " conf" -#define MSG_PREHEAT_2 _UxGT("預熱ABS") //"Preheat ABS" +#define MSG_PREHEAT_2 _UxGT("預熱" PREHEAT_2_LABEL) //"Preheat PREHEAT_2_LABEL" #define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") //MSG_PREHEAT_2 " " #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" 全部") //MSG_PREHEAT_2 " All" #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" 熱床") //MSG_PREHEAT_2 " Bed" @@ -93,23 +93,23 @@ #define MSG_UBL_MOVING_TO_NEXT _UxGT("移動到下一個") // "Moving to next" #define MSG_UBL_ACTIVATE_MESH _UxGT("激活UBL") // "Activate UBL" #define MSG_UBL_DEACTIVATE_MESH _UxGT("關閉UBL") // "Deactivate UBL" -#define MSG_UBL_SET_BED_TEMP _UxGT("設置熱床溫度") // "Bed Temp" -#define MSG_UBL_SET_HOTEND_TEMP _UxGT("熱端溫度") // "Hotend Temp" +#define MSG_UBL_SET_TEMP_BED _UxGT("設置熱床溫度") // "Bed Temp" +#define MSG_UBL_SET_TEMP_HOTEND _UxGT("熱端溫度") // "Hotend Temp" #define MSG_UBL_MESH_EDIT _UxGT("網格編輯") // "Mesh Edit" #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("編輯客戶網格") // "Edit Custom Mesh" #define MSG_UBL_FINE_TUNE_MESH _UxGT("細調網格") // "Fine Tuning Mesh" #define MSG_UBL_DONE_EDITING_MESH _UxGT("完成編輯網格") // "Done Editing Mesh" -#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("創設客戶網格") // "Build Custom Mesh" +#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("創設客戶網格") // "Build Custom Mesh" #define MSG_UBL_BUILD_MESH_MENU _UxGT("創設網格") // "Build Mesh" -#define MSG_UBL_BUILD_PLA_MESH _UxGT("創設PLA網格") // "Build PLA Mesh" -#define MSG_UBL_BUILD_ABS_MESH _UxGT("創設ABS網格") // "Build ABS Mesh" +#define MSG_UBL_BUILD_MESH_M1 _UxGT("創設" PREHEAT_1_LABEL "網格") // "Build PREHEAT_1_LABEL Mesh" +#define MSG_UBL_BUILD_MESH_M2 _UxGT("創設" PREHEAT_2_LABEL "網格") // "Build PREHEAT_2_LABEL Mesh" #define MSG_UBL_BUILD_COLD_MESH _UxGT("創設冷網格") // "Build Cold Mesh" #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("調整網格高度") // "Adjust Mesh Height" #define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("高度合計") // "Height Amount" #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("批准網格") // "Validate Mesh" -#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("批准PLA網格") // "Validate PLA Mesh" -#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("批准ABS網格") // "Validate ABS Mesh" -#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("批准客戶網格") // "Validate Custom Mesh" +#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("批准" PREHEAT_1_LABEL "網格") // "Validate PREHEAT_1_LABEL Mesh" +#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("批准" PREHEAT_2_LABEL "網格") // "Validate PREHEAT_2_LABEL Mesh" +#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("批准客戶網格") // "Validate Custom Mesh" #define MSG_UBL_CONTINUE_MESH _UxGT("繼續熱床網格") // "Continue Bed Mesh" #define MSG_UBL_MESH_LEVELING _UxGT("網格調平") // "Mesh Leveling" #define MSG_UBL_3POINT_MESH_LEVELING _UxGT("三點調平") // "3-Point Leveling" diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp index 6417def1e4..ea8cd8e61e 100644 --- a/Marlin/src/lcd/ultralcd.cpp +++ b/Marlin/src/lcd/ultralcd.cpp @@ -2226,11 +2226,11 @@ void lcd_quick_feedback(const bool clear_buttons) { void _lcd_ubl_custom_mesh() { START_MENU(); MENU_BACK(MSG_UBL_BUILD_MESH_MENU); - MENU_ITEM_EDIT(int3, MSG_UBL_CUSTOM_HOTEND_TEMP, &custom_hotend_temp, EXTRUDE_MINTEMP, (HEATER_0_MAXTEMP - 10)); + MENU_ITEM_EDIT(int3, MSG_UBL_HOTEND_TEMP_CUSTOM, &custom_hotend_temp, EXTRUDE_MINTEMP, (HEATER_0_MAXTEMP - 10)); #if HAS_HEATED_BED - MENU_ITEM_EDIT(int3, MSG_UBL_CUSTOM_BED_TEMP, &custom_bed_temp, BED_MINTEMP, (BED_MAXTEMP - 15)); + MENU_ITEM_EDIT(int3, MSG_UBL_BED_TEMP_CUSTOM, &custom_bed_temp, BED_MINTEMP, (BED_MAXTEMP - 15)); #endif - MENU_ITEM(function, MSG_UBL_BUILD_CUSTOM_MESH, _lcd_ubl_build_custom_mesh); + MENU_ITEM(function, MSG_UBL_BUILD_MESH_CUSTOM, _lcd_ubl_build_custom_mesh); END_MENU(); } @@ -2301,8 +2301,8 @@ void lcd_quick_feedback(const bool clear_buttons) { * UBL Validate Mesh submenu * * << UBL Tools - * PLA Mesh Validation - * ABS Mesh Validation + * Mesh Validation with Material 1 + * Mesh Validation with Material 2 * Validate Custom Mesh * << Info Screen */ @@ -2310,13 +2310,13 @@ void lcd_quick_feedback(const bool clear_buttons) { START_MENU(); MENU_BACK(MSG_UBL_TOOLS); #if HAS_HEATED_BED - MENU_ITEM(gcode, MSG_UBL_VALIDATE_PLA_MESH, PSTR("G28\nG26 C B" STRINGIFY(PREHEAT_1_TEMP_BED) " H" STRINGIFY(PREHEAT_1_TEMP_HOTEND) " P")); - MENU_ITEM(gcode, MSG_UBL_VALIDATE_ABS_MESH, PSTR("G28\nG26 C B" STRINGIFY(PREHEAT_2_TEMP_BED) " H" STRINGIFY(PREHEAT_2_TEMP_HOTEND) " P")); + MENU_ITEM(gcode, MSG_UBL_VALIDATE_MESH_M1, PSTR("G28\nG26 C B" STRINGIFY(PREHEAT_1_TEMP_BED) " H" STRINGIFY(PREHEAT_1_TEMP_HOTEND) " P")); + MENU_ITEM(gcode, MSG_UBL_VALIDATE_MESH_M2, PSTR("G28\nG26 C B" STRINGIFY(PREHEAT_2_TEMP_BED) " H" STRINGIFY(PREHEAT_2_TEMP_HOTEND) " P")); #else - MENU_ITEM(gcode, MSG_UBL_VALIDATE_PLA_MESH, PSTR("G28\nG26 C B0 H" STRINGIFY(PREHEAT_1_TEMP_HOTEND) " P")); - MENU_ITEM(gcode, MSG_UBL_VALIDATE_ABS_MESH, PSTR("G28\nG26 C B0 H" STRINGIFY(PREHEAT_2_TEMP_HOTEND) " P")); + MENU_ITEM(gcode, MSG_UBL_VALIDATE_MESH_M1, PSTR("G28\nG26 C B0 H" STRINGIFY(PREHEAT_1_TEMP_HOTEND) " P")); + MENU_ITEM(gcode, MSG_UBL_VALIDATE_MESH_M2, PSTR("G28\nG26 C B0 H" STRINGIFY(PREHEAT_2_TEMP_HOTEND) " P")); #endif - MENU_ITEM(function, MSG_UBL_VALIDATE_CUSTOM_MESH, _lcd_ubl_validate_custom_mesh); + MENU_ITEM(function, MSG_UBL_VALIDATE_MESH_CUSTOM, _lcd_ubl_validate_custom_mesh); MENU_ITEM(function, MSG_WATCH, lcd_return_to_status); END_MENU(); } @@ -2400,8 +2400,8 @@ void lcd_quick_feedback(const bool clear_buttons) { * UBL Build Mesh submenu * * << UBL Tools - * Build PLA Mesh - * Build ABS Mesh + * Build Mesh with Material 1 + * Build Mesh with Material 2 * - Build Custom Mesh >> * Build Cold Mesh * - Fill-in Mesh >> @@ -2414,7 +2414,7 @@ void lcd_quick_feedback(const bool clear_buttons) { START_MENU(); MENU_BACK(MSG_UBL_TOOLS); #if HAS_HEATED_BED - MENU_ITEM(gcode, MSG_UBL_BUILD_PLA_MESH, PSTR( + MENU_ITEM(gcode, MSG_UBL_BUILD_MESH_M1, PSTR( "G28\n" "M190 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\n" "M109 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) "\n" @@ -2422,7 +2422,7 @@ void lcd_quick_feedback(const bool clear_buttons) { "M104 S0\n" "M140 S0" )); - MENU_ITEM(gcode, MSG_UBL_BUILD_ABS_MESH, PSTR( + MENU_ITEM(gcode, MSG_UBL_BUILD_MESH_M2, PSTR( "G28\n" "M190 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\n" "M109 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) "\n" @@ -2431,20 +2431,20 @@ void lcd_quick_feedback(const bool clear_buttons) { "M140 S0" )); #else - MENU_ITEM(gcode, MSG_UBL_BUILD_PLA_MESH, PSTR( + MENU_ITEM(gcode, MSG_UBL_BUILD_MESH_M1, PSTR( "G28\n" "M109 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) "\n" "G29 P1\n" "M104 S0" )); - MENU_ITEM(gcode, MSG_UBL_BUILD_ABS_MESH, PSTR( + MENU_ITEM(gcode, MSG_UBL_BUILD_MESH_M2, PSTR( "G28\n" "M109 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) "\n" "G29 P1\n" "M104 S0" )); #endif - MENU_ITEM(submenu, MSG_UBL_BUILD_CUSTOM_MESH, _lcd_ubl_custom_mesh); + MENU_ITEM(submenu, MSG_UBL_BUILD_MESH_CUSTOM, _lcd_ubl_custom_mesh); MENU_ITEM(gcode, MSG_UBL_BUILD_COLD_MESH, PSTR("G28\nG29 P1")); MENU_ITEM(submenu, MSG_UBL_FILLIN_MESH, _lcd_ubl_fillin_menu); MENU_ITEM(gcode, MSG_UBL_CONTINUE_MESH, PSTR("G29 P1 C"));