zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Fix call to uninitialized PWM pin, heater 2 overlap (#13674)

Browse source
This commit is contained in:
InsanityAutomation 2019-04-15 16:57:34 -04:00 committed by Scott Lahteine
parent 6a71df2925
commit aa0f7afbe6
2 changed files with 4 additions and 2 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
Marlin/src/gcode/control/M3-M5.cpp
View file

@ -74,7 +74,9 @@ inline void delay_for_power_down() { safe_delay(SPINDLE_LASER_POWERDOWN_DELAY);
inline void set_spindle_laser_ocr(const uint8_t ocr) { inline void set_spindle_laser_ocr(const uint8_t ocr) {
WRITE(SPINDLE_LASER_ENA_PIN, SPINDLE_LASER_ENABLE_INVERT); // turn spindle on (active low) WRITE(SPINDLE_LASER_ENA_PIN, SPINDLE_LASER_ENABLE_INVERT); // turn spindle on (active low)
#if ENABLED(SPINDLE_LASER_PWM)
analogWrite(SPINDLE_LASER_PWM_PIN, (SPINDLE_LASER_PWM_INVERT) ? 255 - ocr : ocr); analogWrite(SPINDLE_LASER_PWM_PIN, (SPINDLE_LASER_PWM_INVERT) ? 255 - ocr : ocr);
#endif
} }
#if ENABLED(SPINDLE_LASER_PWM) #if ENABLED(SPINDLE_LASER_PWM)

2
Marlin/src/pins/pins_FORMBOT_TREX3.h
View file

@ -143,7 +143,7 @@
#define LED_PIN 13 #define LED_PIN 13
#endif #endif
#define SPINDLE_LASER_PWM_PIN 7 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN -1 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENA_PIN 4 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 4 // Pin should have a pullup!
// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector // Use the RAMPS 1.4 Analog input 5 on the AUX2 connector