Merge bugfix-2.0.x into 2.0.x

.github/workflows/test-builds.yml

@@ -41,6 +41,7 @@ jobs:
         - mega2560
         - teensy31
         - teensy35
+        - teensy41
         - SAMD51_grandcentral_m4
 
         # Extended AVR Environments
@@ -70,6 +71,7 @@ jobs:
         - mks_robin_stm32
         - ARMED
         - FYSETC_S6
+        - STM32F070CB_malyan
         - STM32F070RB_malyan
         - malyan_M300
         - mks_robin_lite

Marlin/Configuration.h

@@ -34,9 +34,8 @@
  * - Extra features
  *
  * Advanced settings can be found in Configuration_adv.h
- *
  */
-#define CONFIGURATION_H_VERSION 020006
+#define CONFIGURATION_H_VERSION 020007
 
 //===========================================================================
 //============================= Getting Started =============================
@@ -390,6 +389,7 @@
  *    21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v excitation (STM32 \ LPC176x....)
  *    22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
  *    23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
+ *    30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
  *   201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
@@ -486,24 +486,17 @@
   //#define PID_AUTOTUNE_MENU     // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
   //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
                                   // Set/get with gcode: M301 E[extruder number, 0-2]
-
+  #if ENABLED(PID_PARAMS_PER_HOTEND)
-  // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
+    // Specify between 1 and HOTENDS values per array.
-
+    // If fewer than EXTRUDER values are provided, the last element will be repeated.
-  // Ultimaker
+    #define DEFAULT_Kp_LIST {  22.20,  20.0 }
-  #define DEFAULT_Kp 22.2
+    #define DEFAULT_Ki_LIST {   1.08,   1.0 }
-  #define DEFAULT_Ki 1.08
+    #define DEFAULT_Kd_LIST { 114.00, 112.0 }
-  #define DEFAULT_Kd 114
+  #else
-
+    #define DEFAULT_Kp  22.20
-  // MakerGear
+    #define DEFAULT_Ki   1.08
-  //#define DEFAULT_Kp 7.0
+    #define DEFAULT_Kd 114.00
-  //#define DEFAULT_Ki 0.1
+  #endif
-  //#define DEFAULT_Kd 12
-
-  // Mendel Parts V9 on 12V
-  //#define DEFAULT_Kp 63.0
-  //#define DEFAULT_Ki 2.25
-  //#define DEFAULT_Kd 440
-
 #endif // PIDTEMP
 
 //===========================================================================
@@ -539,18 +532,12 @@
   //#define MIN_BED_POWER 0
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
-  //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
+  // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
-  //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
+  // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
   #define DEFAULT_bedKp 10.00
   #define DEFAULT_bedKi .023
   #define DEFAULT_bedKd 305.4
 
-  //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
-  //from pidautotune
-  //#define DEFAULT_bedKp 97.1
-  //#define DEFAULT_bedKi 1.41
-  //#define DEFAULT_bedKd 1675.16
-
   // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
 #endif // PIDTEMPBED
 
@@ -608,7 +595,7 @@
 
 // @section machine
 
-// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics
+// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
 // either in the usual order or reversed
 //#define COREXY
 //#define COREXZ
@@ -616,6 +603,7 @@
 //#define COREYX
 //#define COREZX
 //#define COREZY
+//#define MARKFORGED_XY  // MarkForged. See https://reprap.org/forum/read.php?152,504042
 
 //===========================================================================
 //============================== Endstop Settings ===========================
@@ -866,7 +854,6 @@
  *    - For simple switches connect...
  *      - normally-closed switches to GND and D32.
  *      - normally-open switches to 5V and D32.
- *
  */
 //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
 
@@ -1578,7 +1565,6 @@
  *
  *   Caveats: The ending Z should be the same as starting Z.
  * Attention: EXPERIMENTAL. G-code arguments may change.
- *
  */
 //#define NOZZLE_CLEAN_FEATURE
 
@@ -1731,7 +1717,6 @@
  *
  * SD Card support is disabled by default. If your controller has an SD slot,
  * you must uncomment the following option or it won't work.
- *
  */
 //#define SDSUPPORT
 
@@ -1968,6 +1953,14 @@
 //
 //#define FF_INTERFACEBOARD
 
+//
+// TFT GLCD Panel with Marlin UI
+// Panel connected to main board by SPI or I2C interface.
+// See https://github.com/Serhiy-K/TFTGLCDAdapter
+//
+//#define TFTGLCD_PANEL_SPI
+//#define TFTGLCD_PANEL_I2C
+
 //=============================================================================
 //=======================   LCD / Controller Selection  =======================
 //=========================      (Graphical LCDs)      ========================
@@ -2171,6 +2164,9 @@
 // Touch-screen LCD for Malyan M200/M300 printers
 //
 //#define MALYAN_LCD
+#if ENABLED(MALYAN_LCD)
+  #define LCD_SERIAL_PORT 1  // Default is 1 for Malyan M200
+#endif
 
 //
 // Touch UI for FTDI EVE (FT800/FT810) displays
@@ -2184,7 +2180,7 @@
 //#define ANYCUBIC_LCD_I3MEGA
 //#define ANYCUBIC_LCD_CHIRON
 #if EITHER(ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON)
-  #define ANYCUBIC_LCD_SERIAL_PORT 3
+  #define LCD_SERIAL_PORT 3  // Default is 3 for Anycubic
   //#define ANYCUBIC_LCD_DEBUG
 #endif
 
@@ -2343,7 +2339,6 @@
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.
- *
  */
 //#define RGB_LED
 //#define RGBW_LED

Marlin/Configuration_adv.h

@@ -29,9 +29,8 @@
  * Some of these settings can damage your printer if improperly set!
  *
  * Basic settings can be found in Configuration.h
- *
  */
-#define CONFIGURATION_ADV_H_VERSION 020006
+#define CONFIGURATION_ADV_H_VERSION 020007
 
 // @section temperature
 
@@ -738,7 +737,6 @@
    *               | 4   3 | 1   4 | 2   1 | 3   2 |
    *               |       |       |       |       |
    *               | 1   2 | 2   3 | 3   4 | 4   1 |
-   *
    */
   #ifndef Z_STEPPER_ALIGN_XY
     //#define Z_STEPPERS_ORIENTATION 0
@@ -773,7 +771,6 @@
 //
 //#define ASSISTED_TRAMMING
 #if ENABLED(ASSISTED_TRAMMING)
-
   // Define positions for probing points, use the hotend as reference not the sensor.
   #define TRAMMING_POINT_XY { {  20, 20 }, { 200,  20 }, { 200, 200 }, { 20, 200 } }
 
@@ -786,6 +783,9 @@
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G35
 
+  // Add a menu item for Assisted Tramming
+  //#define ASSISTED_TRAMMING_MENU_ITEM
+
   /**
    * Screw thread:
    *   M3: 30 = Clockwise, 31 = Counter-Clockwise
@@ -793,7 +793,6 @@
    *   M5: 50 = Clockwise, 51 = Counter-Clockwise
    */
   #define TRAMMING_SCREW_THREAD 30
-
 #endif
 
 // @section motion
@@ -1105,23 +1104,26 @@
   #define BOOTSCREEN_TIMEOUT 4000        // (ms) Total Duration to display the boot screen(s)
 #endif
 
-#if HAS_GRAPHICAL_LCD && EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
+#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL)
-  //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
+  //#define SHOW_REMAINING_TIME       // Display estimated time to completion
-  //#define SHOW_REMAINING_TIME          // Display estimated time to completion
   #if ENABLED(SHOW_REMAINING_TIME)
-    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
+    //#define USE_M73_REMAINING_TIME  // Use remaining time from M73 command instead of estimation
-    //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+    //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time
   #endif
-#endif
 
-#if HAS_CHARACTER_LCD && EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
+  #if HAS_MARLINUI_U8GLIB
-  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
+    //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
-  #if ENABLED(LCD_PROGRESS_BAR)
+  #endif
-    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+
-    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+  #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL)
-    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define LCD_PROGRESS_BAR            // Show a progress bar on HD44780 LCDs for SD printing
-    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    #if ENABLED(LCD_PROGRESS_BAR)
-    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
+      #define PROGRESS_BAR_BAR_TIME 2000  // (ms) Amount of time to show the bar
+      #define PROGRESS_BAR_MSG_TIME 3000  // (ms) Amount of time to show the status message
+      #define PROGRESS_MSG_EXPIRE   0     // (ms) Amount of time to retain the status message (0=forever)
+      //#define PROGRESS_MSG_ONCE         // Show the message for MSG_TIME then clear it
+      //#define LCD_PROGRESS_BAR_TEST     // Add a menu item to test the progress bar
+    #endif
   #endif
 #endif
 
@@ -1164,6 +1166,7 @@
   #if ENABLED(POWER_LOSS_RECOVERY)
     #define PLR_ENABLED_DEFAULT   false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
     //#define BACKUP_POWER_SUPPLY       // Backup power / UPS to move the steppers on power loss
+    //#define POWER_LOSS_RECOVER_ZHOME  // Z homing is needed for proper recovery. 99.9% of the time this should be disabled!
     //#define POWER_LOSS_ZRAISE       2 // (mm) Z axis raise on resume (on power loss with UPS)
     //#define POWER_LOSS_PIN         44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
     //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
@@ -1324,7 +1327,7 @@
  * controller events, as there is a trade-off between reliable
  * printing performance versus fast display updates.
  */
-#if HAS_GRAPHICAL_LCD
+#if HAS_MARLINUI_U8GLIB
   // Show SD percentage next to the progress bar
   //#define DOGM_SD_PERCENT
 
@@ -1394,18 +1397,18 @@
   //#define MARLIN_SNAKE
   //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
-#endif // HAS_GRAPHICAL_LCD
+#endif // HAS_MARLINUI_U8GLIB
 
 //
 // Additional options for DGUS / DWIN displays
 //
 #if HAS_DGUS_LCD
-  #define DGUS_SERIAL_PORT 3
+  #define LCD_SERIAL_PORT 3
-  #define DGUS_BAUDRATE 115200
+  #define LCD_BAUDRATE 115200
 
   #define DGUS_RX_BUFFER_SIZE 128
   #define DGUS_TX_BUFFER_SIZE 48
-  //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS  // Fix Rx overrun situation (Currently only for AVR)
+  //#define SERIAL_STATS_RX_BUFFER_OVERRUNS  // Fix Rx overrun situation (Currently only for AVR)
 
   #define DGUS_UPDATE_INTERVAL_MS  500    // (ms) Interval between automatic screen updates
 
@@ -1572,6 +1575,7 @@
 #if ENABLED(BABYSTEPPING)
   //#define INTEGRATED_BABYSTEPPING         // EXPERIMENTAL integration of babystepping into the Stepper ISR
   //#define BABYSTEP_WITHOUT_HOMING
+  //#define BABYSTEP_ALWAYS_AVAILABLE       // Allow babystepping at all times (not just during movement).
   //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
   //#define BABYSTEP_MILLIMETER_UNITS       // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps
@@ -1582,7 +1586,6 @@
   #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
     #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
                                             // Note: Extra time may be added to mitigate controller latency.
-    //#define BABYSTEP_ALWAYS_AVAILABLE     // Allow babystepping at all times (not just during movement).
     //#define MOVE_Z_WHEN_IDLE              // Jump to the move Z menu on doubleclick when printer is idle.
     #if ENABLED(MOVE_Z_WHEN_IDLE)
       #define MOVE_Z_IDLE_MULTIPLICATOR 1   // Multiply 1mm by this factor for the move step size.
@@ -1950,7 +1953,6 @@
  * Be sure to turn off auto-retract during filament change.
  *
  * Note that M207 / M208 / M209 settings are saved to EEPROM.
- *
  */
 //#define FWRETRACT
 #if ENABLED(FWRETRACT)
@@ -1976,7 +1978,7 @@
  * Universal tool change settings.
  * Applies to all types of extruders except where explicitly noted.
  */
-#if EXTRUDERS > 1
+#if HAS_MULTI_EXTRUDER
   // Z raise distance for tool-change, as needed for some extruders
   #define TOOLCHANGE_ZRAISE                 2 // (mm)
   //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT  // Apply raise before swap retraction (if enabled)
@@ -2040,7 +2042,7 @@
     //#define TOOLCHANGE_PARK_X_ONLY          // X axis only move
     //#define TOOLCHANGE_PARK_Y_ONLY          // Y axis only move
   #endif
-#endif // EXTRUDERS > 1
+#endif // HAS_MULTI_EXTRUDER
 
 /**
  * Advanced Pause
@@ -2487,7 +2489,7 @@
   #define E7_HYBRID_THRESHOLD     30
 
   /**
-   * Use StallGuard2 to home / probe X, Y, Z.
+   * Use StallGuard to home / probe X, Y, Z.
    *
    * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only
    * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin.
@@ -2508,6 +2510,8 @@
    *
    * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when
    * homing and adds a guard period for endstop triggering.
+   *
+   * Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
    */
   //#define SENSORLESS_HOMING // StallGuard capable drivers only
 
@@ -3227,6 +3231,7 @@
 //#define HOST_ACTION_COMMANDS
 #if ENABLED(HOST_ACTION_COMMANDS)
   //#define HOST_PROMPT_SUPPORT
+  //#define HOST_START_MENU_ITEM  // Add a menu item that tells the host to start
 #endif
 
 /**
@@ -3334,6 +3339,7 @@
   #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
   #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
   #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }
+  //#define JOYSTICK_DEBUG
 #endif
 
 /**
@@ -3411,10 +3417,10 @@
 #if ENABLED(PRUSA_MMU2)
 
   // Serial port used for communication with MMU2.
-  // For AVR enable the UART port used for the MMU. (e.g., internalSerial)
+  // For AVR enable the UART port used for the MMU. (e.g., mmuSerial)
   // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2)
-  #define INTERNAL_SERIAL_PORT 2
+  #define MMU2_SERIAL_PORT 2
-  #define MMU2_SERIAL internalSerial
+  #define MMU2_SERIAL mmuSerial
 
   // Use hardware reset for MMU if a pin is defined for it
   //#define MMU2_RST_PIN 23
@@ -3465,7 +3471,7 @@
    */
   //#define MMU_EXTRUDER_SENSOR
   #if ENABLED(MMU_EXTRUDER_SENSOR)
-    #define MMU_LOADING_ATTEMPTS_NR 5 //max. number of attempts to load filament if first load fail
+    #define MMU_LOADING_ATTEMPTS_NR 5 // max. number of attempts to load filament if first load fail
   #endif
 
   /**

Marlin/Makefile

@@ -170,110 +170,114 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1100)
 else ifeq ($(HARDWARE_MOTHERBOARD),1101)
 # Velleman K8400 Controller (derived from 3Drag Controller)
 else ifeq ($(HARDWARE_MOTHERBOARD),1102)
-# Velleman K8600 Controller (derived from 3Drag Controller)
+# Velleman K8600 Controller (Vertex Nano)
 else ifeq ($(HARDWARE_MOTHERBOARD),1103)
-# 2PrintBeta BAM&DICE with STK drivers
+# Velleman K8800 Controller (Vertex Delta)
 else ifeq ($(HARDWARE_MOTHERBOARD),1104)
-# 2PrintBeta BAM&DICE Due with STK drivers
+# 2PrintBeta BAM&DICE with STK drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1105)
-# MKS BASE v1.0
+# 2PrintBeta BAM&DICE Due with STK drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1106)
-# MKS v1.4 with A4982 stepper drivers
+# MKS BASE v1.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1107)
-# MKS v1.5 with Allegro A4982 stepper drivers
+# MKS v1.4 with A4982 stepper drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1108)
-# MKS v1.6 with Allegro A4982 stepper drivers
+# MKS v1.5 with Allegro A4982 stepper drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1109)
-# MKS BASE 1.0 with Heroic HR4982 stepper drivers
+# MKS v1.6 with Allegro A4982 stepper drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1110)
-# MKS GEN v1.3 or 1.4
+# MKS BASE 1.0 with Heroic HR4982 stepper drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1111)
-# MKS GEN L
+# MKS GEN v1.3 or 1.4
 else ifeq ($(HARDWARE_MOTHERBOARD),1112)
-# zrib V2.0 control board (Chinese knock off RAMPS replica)
+# MKS GEN L
 else ifeq ($(HARDWARE_MOTHERBOARD),1113)
-# BigTreeTech or BIQU KFB2.0
+# zrib V2.0 control board (Chinese knock off RAMPS replica)
 else ifeq ($(HARDWARE_MOTHERBOARD),1114)
-# Felix 2.0+ Electronics Board (RAMPS like)
+# BigTreeTech or BIQU KFB2.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1115)
-# Invent-A-Part RigidBoard
+# Felix 2.0+ Electronics Board (RAMPS like)
 else ifeq ($(HARDWARE_MOTHERBOARD),1116)
-# Invent-A-Part RigidBoard V2
+# Invent-A-Part RigidBoard
 else ifeq ($(HARDWARE_MOTHERBOARD),1117)
-# Sainsmart 2-in-1 board
+# Invent-A-Part RigidBoard V2
 else ifeq ($(HARDWARE_MOTHERBOARD),1118)
-# Ultimaker
+# Sainsmart 2-in-1 board
 else ifeq ($(HARDWARE_MOTHERBOARD),1119)
-# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+# Ultimaker
 else ifeq ($(HARDWARE_MOTHERBOARD),1120)
+# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+else ifeq ($(HARDWARE_MOTHERBOARD),1121)
   MCU ?= atmega1280
 
 # Azteeg X3
-else ifeq ($(HARDWARE_MOTHERBOARD),1121)
-# Azteeg X3 Pro
 else ifeq ($(HARDWARE_MOTHERBOARD),1122)
-# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
+# Azteeg X3 Pro
 else ifeq ($(HARDWARE_MOTHERBOARD),1123)
-# Rumba
+# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
 else ifeq ($(HARDWARE_MOTHERBOARD),1124)
-# Raise3D Rumba
+# Rumba
 else ifeq ($(HARDWARE_MOTHERBOARD),1125)
-# Rapide Lite RL200 Rumba
+# Raise3D Rumba
 else ifeq ($(HARDWARE_MOTHERBOARD),1126)
-# Formbot T-Rex 2 Plus
+# Rapide Lite RL200 Rumba
 else ifeq ($(HARDWARE_MOTHERBOARD),1127)
-# Formbot T-Rex 3
+# Formbot T-Rex 2 Plus
 else ifeq ($(HARDWARE_MOTHERBOARD),1128)
-# Formbot Raptor
+# Formbot T-Rex 3
 else ifeq ($(HARDWARE_MOTHERBOARD),1129)
-# Formbot Raptor 2
+# Formbot Raptor
 else ifeq ($(HARDWARE_MOTHERBOARD),1130)
-# bq ZUM Mega 3D
+# Formbot Raptor 2
 else ifeq ($(HARDWARE_MOTHERBOARD),1131)
-# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
+# bq ZUM Mega 3D
 else ifeq ($(HARDWARE_MOTHERBOARD),1132)
-# TriGorilla Anycubic version 1.3 based on RAMPS EFB
+# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
 else ifeq ($(HARDWARE_MOTHERBOARD),1133)
-# TriGorilla Anycubic version 1.4 based on RAMPS EFB
+# TriGorilla Anycubic version 1.3 based on RAMPS EFB
 else ifeq ($(HARDWARE_MOTHERBOARD),1134)
-# TriGorilla Anycubic version 1.4 Rev 1.1
+# TriGorilla Anycubic version 1.4 based on RAMPS EFB
 else ifeq ($(HARDWARE_MOTHERBOARD),1135)
-# Creality: Ender-4, CR-8
+# TriGorilla Anycubic version 1.4 Rev 1.1
 else ifeq ($(HARDWARE_MOTHERBOARD),1136)
-# Creality: CR10S, CR20, CR-X
+# Creality: Ender-4, CR-8
 else ifeq ($(HARDWARE_MOTHERBOARD),1137)
-# Dagoma F5
+# Creality: CR10S, CR20, CR-X
 else ifeq ($(HARDWARE_MOTHERBOARD),1138)
-# FYSETC F6 1.3
+# Dagoma F5
 else ifeq ($(HARDWARE_MOTHERBOARD),1139)
-# FYSETC F6 1.5
+# FYSETC F6 1.3
 else ifeq ($(HARDWARE_MOTHERBOARD),1140)
-# Duplicator i3 Plus
+# FYSETC F6 1.5
 else ifeq ($(HARDWARE_MOTHERBOARD),1141)
-# VORON
+# Duplicator i3 Plus
 else ifeq ($(HARDWARE_MOTHERBOARD),1142)
-# TRONXY V3 1.0
+# VORON
 else ifeq ($(HARDWARE_MOTHERBOARD),1143)
-# Z-Bolt X Series
+# TRONXY V3 1.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1144)
-# TT OSCAR
+# Z-Bolt X Series
 else ifeq ($(HARDWARE_MOTHERBOARD),1145)
-# Overlord/Overlord Pro
+# TT OSCAR
 else ifeq ($(HARDWARE_MOTHERBOARD),1146)
-# ADIMLab Gantry v1
+# Overlord/Overlord Pro
 else ifeq ($(HARDWARE_MOTHERBOARD),1147)
-# ADIMLab Gantry v2
+# ADIMLab Gantry v1
 else ifeq ($(HARDWARE_MOTHERBOARD),1148)
-# BIQU Tango V1
+# ADIMLab Gantry v2
 else ifeq ($(HARDWARE_MOTHERBOARD),1149)
-# MKS GEN L V2
+# BIQU Tango V1
 else ifeq ($(HARDWARE_MOTHERBOARD),1150)
-# Copymaster 3D
+# MKS GEN L V2
 else ifeq ($(HARDWARE_MOTHERBOARD),1151)
-# Ortur 4
+# MKS GEN L V2.1
 else ifeq ($(HARDWARE_MOTHERBOARD),1152)
-# Tenlog D3 Hero
+# Copymaster 3D
 else ifeq ($(HARDWARE_MOTHERBOARD),1153)
+# Ortur 4
+else ifeq ($(HARDWARE_MOTHERBOARD),1154)
+# Tenlog D3 Hero
+else ifeq ($(HARDWARE_MOTHERBOARD),1155)
 
 #
 # RAMBo and derivatives
@@ -694,7 +698,7 @@ ifeq ($(HARDWARE_VARIANT), Teensy)
   LIB_CXXSRC += usb_api.cpp
 
 else ifeq ($(HARDWARE_VARIANT), archim)
-  CDEFS      += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSB_VID=0x27b1 -DUSB_PID=0x0001 -DUSBCON '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT="Archim"'
+  CDEFS      += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSB_VID=0x27b1 -DUSB_PID=0x0001 -DUSBCON '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT_STRING="Archim"'
   LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp UARTClass.cpp  USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp PluggableUSB.cpp USBCore.cpp
   LIB_SRC    += cortex_handlers.c iar_calls_sam3.c syscalls_sam3.c dtostrf.c itoa.c
 

Marlin/src/HAL/AVR/HAL.h

@@ -15,6 +15,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
  */
 #pragma once
 
@@ -81,54 +82,29 @@ typedef int8_t pin_t;
 
 // Serial ports
 #ifdef USBCON
-  #if ENABLED(BLUETOOTH)
+  #define MYSERIAL0 TERN(BLUETOOTH, bluetoothSerial, Serial)
-    #define MYSERIAL0 bluetoothSerial
-  #else
-    #define MYSERIAL0 Serial
-  #endif
-  #define NUM_SERIAL 1
 #else
   #if !WITHIN(SERIAL_PORT, -1, 3)
     #error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
   #endif
-
   #define MYSERIAL0 customizedSerial1
 
   #ifdef SERIAL_PORT_2
     #if !WITHIN(SERIAL_PORT_2, -1, 3)
       #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
-    #elif SERIAL_PORT_2 == SERIAL_PORT
-      #error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
     #endif
     #define MYSERIAL1 customizedSerial2
-    #define NUM_SERIAL 2
-  #else
-    #define NUM_SERIAL 1
   #endif
 #endif
 
-#ifdef DGUS_SERIAL_PORT
+#ifdef LCD_SERIAL_PORT
-  #if !WITHIN(DGUS_SERIAL_PORT, -1, 3)
+  #if !WITHIN(LCD_SERIAL_PORT, -1, 3)
-    #error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
+    #error "LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration."
-  #elif DGUS_SERIAL_PORT == SERIAL_PORT
-    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
-  #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
-    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
   #endif
-  #define DGUS_SERIAL internalDgusSerial
+  #define LCD_SERIAL lcdSerial
-
+  #if HAS_DGUS_LCD
-  #define DGUS_SERIAL_GET_TX_BUFFER_FREE DGUS_SERIAL.get_tx_buffer_free
+    #define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.get_tx_buffer_free()
-#endif
-
-#ifdef ANYCUBIC_LCD_SERIAL_PORT
-  #if !WITHIN(ANYCUBIC_LCD_SERIAL_PORT, -1, 3)
-    #error "ANYCUBIC_LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration."
-  #elif ANYCUBIC_LCD_SERIAL_PORT == SERIAL_PORT
-    #error "ANYCUBIC_LCD_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
-  #elif defined(SERIAL_PORT_2) && ANYCUBIC_LCD_SERIAL_PORT == SERIAL_PORT_2
-    #error "ANYCUBIC_LCD_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
   #endif
-  #define ANYCUBIC_LCD_SERIAL anycubicLcdSerial
 #endif
 
 // ------------------------

Marlin/src/HAL/AVR/MarlinSerial.h

@@ -48,11 +48,11 @@
 
   // These are macros to build serial port register names for the selected SERIAL_PORT (C preprocessor
   // requires two levels of indirection to expand macro values properly)
-  #define SERIAL_REGNAME(registerbase,number,suffix) SERIAL_REGNAME_INTERNAL(registerbase,number,suffix)
+  #define SERIAL_REGNAME(registerbase,number,suffix) _SERIAL_REGNAME(registerbase,number,suffix)
   #if SERIAL_PORT == 0 && (!defined(UBRR0H) || !defined(UDR0)) // use un-numbered registers if necessary
-    #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##suffix
+    #define _SERIAL_REGNAME(registerbase,number,suffix) registerbase##suffix
   #else
-    #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##number##suffix
+    #define _SERIAL_REGNAME(registerbase,number,suffix) registerbase##number##suffix
   #endif
 
   // Registers used by MarlinSerial class (expanded depending on selected serial port)
@@ -217,10 +217,12 @@
       static ring_buffer_pos_t available();
       static void write(const uint8_t c);
       static void flushTX();
-      #ifdef DGUS_SERIAL_PORT
+      #if HAS_DGUS_LCD
         static ring_buffer_pos_t get_tx_buffer_free();
       #endif
 
+      static inline bool emergency_parser_enabled() { return Cfg::EMERGENCYPARSER; }
+
       FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
       FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
       FORCE_INLINE static uint8_t framing_errors() { return Cfg::RX_FRAMING_ERRORS ? rx_framing_errors : 0; }
@@ -278,55 +280,50 @@
 
 #endif // !USBCON
 
-#ifdef INTERNAL_SERIAL_PORT
+#ifdef MMU2_SERIAL_PORT
   template <uint8_t serial>
-  struct MarlinInternalSerialCfg {
+  struct MMU2SerialCfg {
     static constexpr int PORT               = serial;
+    static constexpr bool XONOFF            = false;
+    static constexpr bool EMERGENCYPARSER   = false;
+    static constexpr bool DROPPED_RX        = false;
+    static constexpr bool RX_FRAMING_ERRORS = false;
+    static constexpr bool MAX_RX_QUEUED     = false;
     static constexpr unsigned int RX_SIZE   = 32;
     static constexpr unsigned int TX_SIZE   = 32;
-    static constexpr bool XONOFF            = false;
-    static constexpr bool EMERGENCYPARSER   = false;
-    static constexpr bool DROPPED_RX        = false;
     static constexpr bool RX_OVERRUNS       = false;
-    static constexpr bool RX_FRAMING_ERRORS = false;
-    static constexpr bool MAX_RX_QUEUED     = false;
   };
 
-  extern MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>> internalSerial;
+  extern MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>> mmuSerial;
 #endif
 
-#ifdef DGUS_SERIAL_PORT
+#ifdef LCD_SERIAL_PORT
+
   template <uint8_t serial>
-  struct MarlinInternalSerialCfg {
+  struct LCDSerialCfg {
-    static constexpr int PORT               = serial;
+    static constexpr int PORT                 = serial;
-    static constexpr unsigned int RX_SIZE   = DGUS_RX_BUFFER_SIZE;
+    static constexpr bool XONOFF              = false;
-    static constexpr unsigned int TX_SIZE   = DGUS_TX_BUFFER_SIZE;
+    static constexpr bool EMERGENCYPARSER     = ENABLED(EMERGENCY_PARSER);
-    static constexpr bool XONOFF            = false;
+    static constexpr bool DROPPED_RX          = false;
-    static constexpr bool EMERGENCYPARSER   = false;
+    static constexpr bool RX_FRAMING_ERRORS   = false;
-    static constexpr bool DROPPED_RX        = false;
+    static constexpr bool MAX_RX_QUEUED       = false;
-    static constexpr bool RX_OVERRUNS       = BOTH(HAS_DGUS_LCD, DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS);
+    #if HAS_DGUS_LCD
-    static constexpr bool RX_FRAMING_ERRORS = false;
+      static constexpr unsigned int RX_SIZE   = DGUS_RX_BUFFER_SIZE;
-    static constexpr bool MAX_RX_QUEUED     = false;
+      static constexpr unsigned int TX_SIZE   = DGUS_TX_BUFFER_SIZE;
+      static constexpr bool RX_OVERRUNS       = ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS);
+    #elif EITHER(ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON)
+      static constexpr unsigned int RX_SIZE   = 64;
+      static constexpr unsigned int TX_SIZE   = 128;
+      static constexpr bool RX_OVERRUNS       = false;
+    #else
+      static constexpr unsigned int RX_SIZE   = 64;
+      static constexpr unsigned int TX_SIZE   = 128;
+      static constexpr bool RX_OVERRUNS       = false
+    #endif
   };
 
-  extern MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>> internalDgusSerial;
+  extern MarlinSerial<LCDSerialCfg<LCD_SERIAL_PORT>> lcdSerial;
-#endif
 
-#ifdef ANYCUBIC_LCD_SERIAL_PORT
-  template <uint8_t serial>
-  struct AnycubicLcdSerialCfg {
-    static constexpr int PORT               = serial;
-    static constexpr unsigned int RX_SIZE   = 64;
-    static constexpr unsigned int TX_SIZE   = 128;
-    static constexpr bool XONOFF            = false;
-    static constexpr bool EMERGENCYPARSER   = false;
-    static constexpr bool DROPPED_RX        = false;
-    static constexpr bool RX_OVERRUNS       = false;
-    static constexpr bool RX_FRAMING_ERRORS = false;
-    static constexpr bool MAX_RX_QUEUED     = false;
-  };
-
-  extern MarlinSerial<AnycubicLcdSerialCfg<ANYCUBIC_LCD_SERIAL_PORT>> anycubicLcdSerial;
 #endif
 
 // Use the UART for Bluetooth in AT90USB configurations

Marlin/src/HAL/AVR/Servo.cpp

@@ -48,7 +48,6 @@
  * readMicroseconds()    - Get the last-written servo pulse width in microseconds.
  * attached()            - Return true if a servo is attached.
  * detach()              - Stop an attached servo from pulsing its i/o pin.
- *
  */
 
 #ifdef __AVR__

Marlin/src/HAL/AVR/fastio.h

@@ -29,11 +29,17 @@
 
 #include <avr/io.h>
 
-#define AVR_AT90USB1286_FAMILY (defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__))
+#if defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__)
-#define AVR_ATmega1284_FAMILY (defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__))
+  #define AVR_AT90USB1286_FAMILY 1
-#define AVR_ATmega2560_FAMILY (defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__))
+#elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__)
-#define AVR_ATmega2561_FAMILY (defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__))
+  #define AVR_ATmega1284_FAMILY 1
-#define AVR_ATmega328_FAMILY (defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__))
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+  #define AVR_ATmega2560_FAMILY 1
+#elif defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)
+  #define AVR_ATmega2561_FAMILY 1
+#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__)
+  #define AVR_ATmega328_FAMILY 1
+#endif
 
 /**
  * Include Ports and Functions

Marlin/src/HAL/AVR/pinsDebug.h

@@ -26,7 +26,9 @@
 
 #define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
 
-#define AVR_ATmega2560_FAMILY_PLUS_70 MB(BQ_ZUM_MEGA_3D, MIGHTYBOARD_REVE, MINIRAMBO, SCOOVO_X9H)
+#if MB(BQ_ZUM_MEGA_3D, MIGHTYBOARD_REVE, MINIRAMBO, SCOOVO_X9H, TRIGORILLA_14)
+  #define AVR_ATmega2560_FAMILY_PLUS_70 1
+#endif
 
 #if AVR_AT90USB1286_FAMILY
 

Marlin/src/HAL/AVR/pinsDebug_plus_70.h

@@ -22,15 +22,12 @@
  * Structures for 2560 family boards that use more than 70 pins
  */
 
-#undef NUM_DIGITAL_PINS
+#if MB(BQ_ZUM_MEGA_3D, MINIRAMBO, SCOOVO_X9H, TRIGORILLA_14)
-#if MB(BQ_ZUM_MEGA_3D)
+  #undef NUM_DIGITAL_PINS
   #define NUM_DIGITAL_PINS            85
 #elif MB(MIGHTYBOARD_REVE)
+  #undef NUM_DIGITAL_PINS
   #define NUM_DIGITAL_PINS            80
-#elif MB(MINIRAMBO)
-  #define NUM_DIGITAL_PINS            85
-#elif MB(SCOOVO_X9H)
-  #define NUM_DIGITAL_PINS            85
 #endif
 
 #define PA 1

Marlin/src/HAL/AVR/timers.h

@@ -15,6 +15,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
  */
 #pragma once
 

Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp

@@ -57,7 +57,7 @@
 
 #include "../../inc/MarlinConfigPre.h"
 
-#if HAS_GRAPHICAL_LCD
+#if HAS_MARLINUI_U8GLIB
 
 #include "../shared/Marduino.h"
 #include "../shared/Delay.h"
@@ -189,5 +189,5 @@ uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
   return 1;
 }
 
-#endif // HAS_GRAPHICAL_LCD
+#endif // HAS_MARLINUI_U8GLIB
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/HAL.h

@@ -38,59 +38,36 @@
 
 #include <stdint.h>
 
+#define _MSERIAL(X) Serial##X
+#define MSERIAL(X) _MSERIAL(X)
+#define Serial0 Serial
+
 // Define MYSERIAL0/1 before MarlinSerial includes!
 #if SERIAL_PORT == -1 || ENABLED(EMERGENCY_PARSER)
   #define MYSERIAL0 customizedSerial1
-#elif SERIAL_PORT == 0
+#elif WITHIN(SERIAL_PORT, 0, 3)
-  #define MYSERIAL0 Serial
+  #define MYSERIAL0 MSERIAL(SERIAL_PORT)
-#elif SERIAL_PORT == 1
-  #define MYSERIAL0 Serial1
-#elif SERIAL_PORT == 2
-  #define MYSERIAL0 Serial2
-#elif SERIAL_PORT == 3
-  #define MYSERIAL0 Serial3
 #else
   #error "The required SERIAL_PORT must be from -1 to 3. Please update your configuration."
 #endif
 
 #ifdef SERIAL_PORT_2
-  #if SERIAL_PORT_2 == SERIAL_PORT
+  #if SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
-    #error "SERIAL_PORT_2 must be different from SERIAL_PORT. Please update your configuration."
-  #elif SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
     #define MYSERIAL1 customizedSerial2
-  #elif SERIAL_PORT_2 == 0
+  #elif WITHIN(SERIAL_PORT_2, 0, 3)
-    #define MYSERIAL1 Serial
+    #define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
-  #elif SERIAL_PORT_2 == 1
-    #define MYSERIAL1 Serial1
-  #elif SERIAL_PORT_2 == 2
-    #define MYSERIAL1 Serial2
-  #elif SERIAL_PORT_2 == 3
-    #define MYSERIAL1 Serial3
   #else
     #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
   #endif
-  #define NUM_SERIAL 2
-#else
-  #define NUM_SERIAL 1
 #endif
 
-#ifdef DGUS_SERIAL_PORT
+#ifdef LCD_SERIAL_PORT
-  #if DGUS_SERIAL_PORT == SERIAL_PORT
+  #if LCD_SERIAL_PORT == -1
-    #error "DGUS_SERIAL_PORT must be different from SERIAL_PORT. Please update your configuration."
+    #define LCD_SERIAL lcdSerial
-  #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
+  #elif WITHIN(LCD_SERIAL_PORT, 0, 3)
-    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
+    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
-  #elif DGUS_SERIAL_PORT == -1
-    #define DGUS_SERIAL internalDgusSerial
-  #elif DGUS_SERIAL_PORT == 0
-    #define DGUS_SERIAL Serial
-  #elif DGUS_SERIAL_PORT == 1
-    #define DGUS_SERIAL Serial1
-  #elif DGUS_SERIAL_PORT == 2
-    #define DGUS_SERIAL Serial2
-  #elif DGUS_SERIAL_PORT == 3
-    #define DGUS_SERIAL Serial3
   #else
-    #error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
+    #error "LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration."
   #endif
 #endif
 

Marlin/src/HAL/DUE/HAL_SPI.cpp

@@ -595,7 +595,7 @@
       SPI_Enable(SPI0);
 
       SET_OUTPUT(DAC0_SYNC);
-      #if EXTRUDERS > 1
+      #if HAS_MULTI_EXTRUDER
         SET_OUTPUT(DAC1_SYNC);
         WRITE(DAC1_SYNC, HIGH);
       #endif
@@ -759,7 +759,6 @@
      *
      *  All of the above can be avoided by defining FORCE_SOFT_SPI to force the
      *  display to use software SPI.
-     *
      */
 
     void spiInit(uint8_t spiRate=6) {  // Default to slowest rate if not specified)

Marlin/src/HAL/DUE/MarlinSerial.h

@@ -122,6 +122,8 @@ public:
   static void write(const uint8_t c);
   static void flushTX();
 
+  static inline bool emergency_parser_enabled() { return Cfg::EMERGENCYPARSER; }
+
   FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
   FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
   FORCE_INLINE static uint8_t framing_errors() { return Cfg::RX_FRAMING_ERRORS ? rx_framing_errors : 0; }

Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp

@@ -52,14 +52,13 @@
  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
  * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
  */
 
 #ifdef __SAM3X8E__
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_GRAPHICAL_LCD
+#if HAS_MARLINUI_U8GLIB
 
 #include <U8glib.h>
 
@@ -145,6 +144,6 @@ uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
   return 1;
 }
 
-#endif // HAS_GRAPHICAL_LCD
+#endif // HAS_MARLINUI_U8GLIB
 
-#endif //__SAM3X8E__
+#endif // __SAM3X8E__

Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp

@@ -57,7 +57,7 @@
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_GRAPHICAL_LCD && DISABLED(U8GLIB_ST7920)
+#if HAS_MARLINUI_U8GLIB && DISABLED(U8GLIB_ST7920)
 
 #undef SPI_SPEED
 #define SPI_SPEED 2  // About 2 MHz
@@ -144,5 +144,5 @@ uint8_t u8g_com_HAL_DUE_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
   return 1;
 }
 
-#endif // HAS_GRAPHICAL_LCD && !U8GLIB_ST7920
+#endif // HAS_MARLINUI_U8GLIB && !U8GLIB_ST7920
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp

@@ -57,7 +57,7 @@
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_GRAPHICAL_LCD
+#if HAS_MARLINUI_U8GLIB
 
 #include "../../shared/Delay.h"
 
@@ -108,5 +108,5 @@ void u8g_spiSend_sw_DUE_mode_3(uint8_t val) { // 3.5MHz
   }
 }
 
-#endif // HAS_GRAPHICAL_LCD
+#endif // HAS_MARLINUI_U8GLIB
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/eeprom_flash.cpp

@@ -53,7 +53,6 @@
  * per page. We can't emulate EE endurance with FLASH for all
  * bytes, but we can emulate endurance for a given percent of
  * bytes.
- *
  */
 
 //#define EE_EMU_DEBUG

Marlin/src/HAL/DUE/pinsDebug.h

@@ -179,5 +179,4 @@ void pwm_details(int32_t pin) {
  * ----------------+--------
  *  ID             |  PB11
  *  VBOF           |  PB10
- *
  */

Marlin/src/HAL/DUE/usb/compiler.h

@@ -173,11 +173,11 @@
 #   define __always_inline   __forceinline
 #elif (defined __GNUC__)
 #ifdef __always_inline
-#	undef __always_inline
+# undef __always_inline
 #endif
-#	define __always_inline   inline __attribute__((__always_inline__))
+# define __always_inline   inline __attribute__((__always_inline__))
 #elif (defined __ICCARM__)
-#	define __always_inline   _Pragma("inline=forced")
+# define __always_inline   _Pragma("inline=forced")
 #endif
 
 /**
@@ -188,11 +188,11 @@
  * heuristics and not inline the function.
  */
 #ifdef __CC_ARM
-#   define __no_inline   __attribute__((noinline))
+# define __no_inline   __attribute__((noinline))
 #elif (defined __GNUC__)
-#	define __no_inline   __attribute__((__noinline__))
+# define __no_inline   __attribute__((__noinline__))
 #elif (defined __ICCARM__)
-#	define __no_inline   _Pragma("inline=never")
+# define __no_inline   _Pragma("inline=never")
 #endif
 
 /*! \brief This macro is used to test fatal errors.
@@ -211,9 +211,9 @@
 #  else
 #undef TEST_SUITE_DEFINE_ASSERT_MACRO
 #    define Assert(expr) \
-	{\
+  {\
-		if (!(expr)) while (true);\
+    if (!(expr)) while (true);\
-	}
+  }
 #  endif
 #else
 #  define Assert(expr) ((void) 0)
@@ -1106,17 +1106,16 @@ static inline uint16_t convert_byte_array_to_16_bit(uint8_t *data)
 /* Converts a 8 Byte array into a 32-Bit value */
 static inline uint32_t convert_byte_array_to_32_bit(uint8_t *data)
 {
-	union
+  union
-	{
+  {
-		uint32_t u32;
+    uint32_t u32;
-		uint8_t u8[8];
+    uint8_t u8[8];
-	}long_addr;
+  }long_addr;
-	uint8_t index;
+  uint8_t index;
-	for (index = 0; index < 4; index++)
+  for (index = 0; index < 4; index++) {
-	{
+    long_addr.u8[index] = *data++;
-		long_addr.u8[index] = *data++;
+  }
-	}
+  return long_addr.u32;
-	return long_addr.u32;
 }
 
 /**

Marlin/src/HAL/ESP32/HAL.h

@@ -15,6 +15,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
  */
 #pragma once
 
@@ -58,9 +59,6 @@ extern portMUX_TYPE spinlock;
   #else
     #define MYSERIAL1 webSocketSerial
   #endif
-  #define NUM_SERIAL 2
-#else
-  #define NUM_SERIAL 1
 #endif
 
 #define CRITICAL_SECTION_START() portENTER_CRITICAL(&spinlock)

Marlin/src/HAL/ESP32/WebSocketSerial.cpp

@@ -86,7 +86,7 @@ int RingBuffer::read() {
 ring_buffer_pos_t RingBuffer::read(uint8_t *buffer) {
    ring_buffer_pos_t len = available();
 
-  for(ring_buffer_pos_t i = 0; read_index != write_index; i++) {
+  for (ring_buffer_pos_t i = 0; read_index != write_index; i++) {
     buffer[i] = data[read_index];
     read_index = NEXT_INDEX(read_index, size);
   }
@@ -139,9 +139,8 @@ size_t WebSocketSerial::write(const uint8_t c) {
 
 size_t WebSocketSerial::write(const uint8_t* buffer, size_t size) {
   size_t written = 0;
-  for(size_t i = 0; i < size; i++) {
+  for (size_t i = 0; i < size; i++)
     written += write(buffer[i]);
-  }
   return written;
 }
 

Marlin/src/HAL/ESP32/ota.h

@@ -15,6 +15,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
  */
 #pragma once
 

Marlin/src/HAL/HAL.h

@@ -25,6 +25,12 @@
 
 #include HAL_PATH(.,HAL.h)
 
+#ifdef SERIAL_PORT_2
+  #define NUM_SERIAL 2
+#else
+  #define NUM_SERIAL 1
+#endif
+
 #define HAL_ADC_RANGE _BV(HAL_ADC_RESOLUTION)
 
 #ifndef I2C_ADDRESS

Marlin/src/HAL/LINUX/HAL.h

@@ -62,7 +62,6 @@ uint8_t _getc();
 
 extern HalSerial usb_serial;
 #define MYSERIAL0 usb_serial
-#define NUM_SERIAL 1
 
 #define ST7920_DELAY_1 DELAY_NS(600)
 #define ST7920_DELAY_2 DELAY_NS(750)

Marlin/src/HAL/LINUX/include/serial.h

@@ -33,7 +33,6 @@
  * Generic RingBuffer
  * T type of the buffer array
  * S size of the buffer (must be power of 2)
- *
  */
 template <typename T, uint32_t S> class RingBuffer {
 public:
@@ -79,6 +78,7 @@ public:
 
   #if ENABLED(EMERGENCY_PARSER)
     EmergencyParser::State emergency_state;
+    static inline bool emergency_parser_enabled() { return true; }
   #endif
 
   HalSerial() { host_connected = true; }

Marlin/src/HAL/LINUX/main.cpp

@@ -107,7 +107,7 @@ int main() {
   std::thread write_serial (write_serial_thread);
   std::thread read_serial (read_serial_thread);
 
-  #if NUM_SERIAL > 0
+  #ifdef MYSERIAL0
     MYSERIAL0.begin(BAUDRATE);
     SERIAL_ECHOLNPGM("x86_64 Initialized");
     SERIAL_FLUSHTX();

Marlin/src/HAL/LINUX/servo_private.h

@@ -45,7 +45,6 @@
  *           Version 2 Copyright (c) 2009 Michael Margolis.  All right reserved.
  *
  * The only modification was to update/delete macros to match the LPC176x.
- *
  */
 
 #include <stdint.h>

Marlin/src/HAL/LINUX/spi_pins.h

@@ -24,7 +24,7 @@
 #include "../../core/macros.h"
 #include "../../inc/MarlinConfigPre.h"
 
-#if BOTH(HAS_GRAPHICAL_LCD, SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
+#if BOTH(HAS_MARLINUI_U8GLIB, SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
   #define LPC_SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                             // needed due to the speed and mode required for communicating with each device being different.
                             // This requirement can be removed if the SPI access to these devices is updated to use

Marlin/src/HAL/LPC1768/HAL.h

@@ -63,58 +63,35 @@ extern "C" volatile uint32_t _millis;
   #define ST7920_DELAY_3 DELAY_NS(750)
 #endif
 
+#define _MSERIAL(X) MSerial##X
+#define MSERIAL(X) _MSERIAL(X)
+#define MSerial0 MSerial
+
 #if SERIAL_PORT == -1
   #define MYSERIAL0 UsbSerial
-#elif SERIAL_PORT == 0
+#elif WITHIN(SERIAL_PORT, 0, 3)
-  #define MYSERIAL0 MSerial
+  #define MYSERIAL0 MSERIAL(SERIAL_PORT)
-#elif SERIAL_PORT == 1
-  #define MYSERIAL0 MSerial1
-#elif SERIAL_PORT == 2
-  #define MYSERIAL0 MSerial2
-#elif SERIAL_PORT == 3
-  #define MYSERIAL0 MSerial3
 #else
   #error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
 #endif
 
 #ifdef SERIAL_PORT_2
-  #if SERIAL_PORT_2 == SERIAL_PORT
+  #if SERIAL_PORT_2 == -1
-    #error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
-  #elif SERIAL_PORT_2 == -1
     #define MYSERIAL1 UsbSerial
-  #elif SERIAL_PORT_2 == 0
+  #elif WITHIN(SERIAL_PORT_2, 0, 3)
-    #define MYSERIAL1 MSerial
+    #define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
-  #elif SERIAL_PORT_2 == 1
-    #define MYSERIAL1 MSerial1
-  #elif SERIAL_PORT_2 == 2
-    #define MYSERIAL1 MSerial2
-  #elif SERIAL_PORT_2 == 3
-    #define MYSERIAL1 MSerial3
   #else
     #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
   #endif
-  #define NUM_SERIAL 2
-#else
-  #define NUM_SERIAL 1
 #endif
 
-#ifdef DGUS_SERIAL_PORT
+#ifdef LCD_SERIAL_PORT
-  #if DGUS_SERIAL_PORT == SERIAL_PORT
+  #if LCD_SERIAL_PORT == -1
-    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
+    #define LCD_SERIAL UsbSerial
-  #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
+  #elif WITHIN(LCD_SERIAL_PORT, 0, 3)
-    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
+    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
-  #elif DGUS_SERIAL_PORT == -1
-    #define DGUS_SERIAL UsbSerial
-  #elif DGUS_SERIAL_PORT == 0
-    #define DGUS_SERIAL MSerial
-  #elif DGUS_SERIAL_PORT == 1
-    #define DGUS_SERIAL MSerial1
-  #elif DGUS_SERIAL_PORT == 2
-    #define DGUS_SERIAL MSerial2
-  #elif DGUS_SERIAL_PORT == 3
-    #define DGUS_SERIAL MSerial3
   #else
-    #error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
+    #error "LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration."
   #endif
 #endif
 

Marlin/src/HAL/LPC1768/HAL_SPI.cpp

@@ -39,10 +39,10 @@
  * Some of the LCD interfaces/adapters result in the LCD SPI and the SD card
  * SPI sharing pins. The SCK, MOSI & MISO pins can NOT be set/cleared with
  * WRITE nor digitalWrite when the hardware SPI module within the LPC17xx is
- * active.  If any of these pins are shared then the software SPI must be used.
+ * active. If any of these pins are shared then the software SPI must be used.
  *
- * A more sophisticated hardware SPI can be found at the following link.  This
+ * A more sophisticated hardware SPI can be found at the following link.
- * implementation has not been fully debugged.
+ * This implementation has not been fully debugged.
  * https://github.com/MarlinFirmware/Marlin/tree/071c7a78f27078fd4aee9a3ef365fcf5e143531e
  */
 
@@ -100,72 +100,25 @@
 
 #else
 
-  // decide which HW SPI device to use
-  #ifndef LPC_HW_SPI_DEV
-    #if (SCK_PIN == P0_07 && MISO_PIN == P0_08 && MOSI_PIN == P0_09)
-      #define LPC_HW_SPI_DEV 1
-    #else
-      #if (SCK_PIN == P0_15 && MISO_PIN == P0_17 && MOSI_PIN == P0_18)
-        #define LPC_HW_SPI_DEV 0
-      #else
-        #error "Invalid pins selected for hardware SPI"
-      #endif
-    #endif
-  #endif
-  #if LPC_HW_SPI_DEV == 0
-    #define LPC_SSPn LPC_SSP0
-  #else
-    #define LPC_SSPn LPC_SSP1
-  #endif
-
   void spiBegin() {  // setup SCK, MOSI & MISO pins for SSP0
-    PINSEL_CFG_Type PinCfg;  // data structure to hold init values
+    spiInit(SPI_SPEED);
-    PinCfg.Funcnum = 2;
-    PinCfg.OpenDrain = 0;
-    PinCfg.Pinmode = 0;
-    PinCfg.Pinnum = LPC176x::pin_bit(SCK_PIN);
-    PinCfg.Portnum = LPC176x::pin_port(SCK_PIN);
-    PINSEL_ConfigPin(&PinCfg);
-    SET_OUTPUT(SCK_PIN);
-
-    PinCfg.Pinnum = LPC176x::pin_bit(MISO_PIN);
-    PinCfg.Portnum = LPC176x::pin_port(MISO_PIN);
-    PINSEL_ConfigPin(&PinCfg);
-    SET_INPUT(MISO_PIN);
-
-    PinCfg.Pinnum = LPC176x::pin_bit(MOSI_PIN);
-    PinCfg.Portnum = LPC176x::pin_port(MOSI_PIN);
-    PINSEL_ConfigPin(&PinCfg);
-    SET_OUTPUT(MOSI_PIN);
-    // divide PCLK by 2 for SSP0
-    CLKPWR_SetPCLKDiv(LPC_HW_SPI_DEV == 0 ? CLKPWR_PCLKSEL_SSP0 : CLKPWR_PCLKSEL_SSP1, CLKPWR_PCLKSEL_CCLK_DIV_2);
-    spiInit(0);
-    SSP_Cmd(LPC_SSPn, ENABLE);  // start SSP running
   }
 
   void spiInit(uint8_t spiRate) {
-    // table to convert Marlin spiRates (0-5 plus default) into bit rates
+    #if MISO_PIN == BOARD_SPI1_MISO_PIN
-    uint32_t Marlin_speed[7]; // CPSR is always 2
+      SPI.setModule(1);
-    Marlin_speed[0] = 8333333; //(SCR:  2)  desired: 8,000,000  actual: 8,333,333  +4.2%  SPI_FULL_SPEED
+    #elif MISO_PIN == BOARD_SPI2_MISO_PIN
-    Marlin_speed[1] = 4166667; //(SCR:  5)  desired: 4,000,000  actual: 4,166,667  +4.2%  SPI_HALF_SPEED
+      SPI.setModule(2);
-    Marlin_speed[2] = 2083333; //(SCR: 11)  desired: 2,000,000  actual: 2,083,333  +4.2%  SPI_QUARTER_SPEED
+    #endif
-    Marlin_speed[3] = 1000000; //(SCR: 24)  desired: 1,000,000  actual: 1,000,000         SPI_EIGHTH_SPEED
+    SPI.setDataSize(DATA_SIZE_8BIT);
-    Marlin_speed[4] =  500000; //(SCR: 49)  desired:   500,000  actual:   500,000         SPI_SPEED_5
+    SPI.setDataMode(SPI_MODE0);
-    Marlin_speed[5] =  250000; //(SCR: 99)  desired:   250,000  actual:   250,000         SPI_SPEED_6
+
-    Marlin_speed[6] =  125000; //(SCR:199)  desired:   125,000  actual:   125,000         Default from HAL.h
+    SPI.setClock(SPISettings::spiRate2Clock(spiRate));
-    // setup for SPI mode
+    SPI.begin();
-    SSP_CFG_Type HW_SPI_init; // data structure to hold init values
-    SSP_ConfigStructInit(&HW_SPI_init);  // set values for SPI mode
-    HW_SPI_init.ClockRate = Marlin_speed[_MIN(spiRate, 6)]; // put in the specified bit rate
-    HW_SPI_init.Mode |= SSP_CR1_SSP_EN;
-    SSP_Init(LPC_SSPn, &HW_SPI_init);  // puts the values into the proper bits in the SSP0 registers
   }
 
   static uint8_t doio(uint8_t b) {
-    /* send and receive a single byte */
+    return SPI.transfer(b & 0x00FF) & 0x00FF;
-    SSP_SendData(LPC_SSPn, b & 0x00FF);
-    while (SSP_GetStatus(LPC_SSPn, SSP_STAT_BUSY));  // wait for it to finish
-    return SSP_ReceiveData(LPC_SSPn) & 0x00FF;
   }
 
   void spiSend(uint8_t b) { doio(b); }
@@ -217,63 +170,74 @@ static inline void waitSpiTxEnd(LPC_SSP_TypeDef *spi_d) {
   while (SSP_GetStatus(spi_d, SSP_STAT_BUSY) == SET) { /* nada */ }     // wait until BSY=0
 }
 
+// Retain the pin init state of the SPI, to avoid init more than once,
+// even if more instances of SPIClass exist
+static bool spiInitialised[BOARD_NR_SPI] = { false };
+
 SPIClass::SPIClass(uint8_t device) {
   // Init things specific to each SPI device
   // clock divider setup is a bit of hack, and needs to be improved at a later date.
 
-  PINSEL_CFG_Type PinCfg;  // data structure to hold init values
   #if BOARD_NR_SPI >= 1
     _settings[0].spi_d = LPC_SSP0;
-    // _settings[0].clockDivider = determine_baud_rate(_settings[0].spi_d, _settings[0].clock);
+    _settings[0].dataMode = SPI_MODE0;
-    PinCfg.Funcnum = 2;
+    _settings[0].dataSize = DATA_SIZE_8BIT;
-    PinCfg.OpenDrain = 0;
+    _settings[0].clock = SPI_CLOCK_MAX;
-    PinCfg.Pinmode = 0;
+    //_settings[0].clockDivider = determine_baud_rate(_settings[0].spi_d, _settings[0].clock);
-    PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI1_SCK_PIN);
-    PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI1_SCK_PIN);
-    PINSEL_ConfigPin(&PinCfg);
-    SET_OUTPUT(BOARD_SPI1_SCK_PIN);
-
-    PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI1_MISO_PIN);
-    PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI1_MISO_PIN);
-    PINSEL_ConfigPin(&PinCfg);
-    SET_INPUT(BOARD_SPI1_MISO_PIN);
-
-    PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI1_MOSI_PIN);
-    PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI1_MOSI_PIN);
-    PINSEL_ConfigPin(&PinCfg);
-    SET_OUTPUT(BOARD_SPI1_MOSI_PIN);
   #endif
 
   #if BOARD_NR_SPI >= 2
     _settings[1].spi_d = LPC_SSP1;
-    // _settings[1].clockDivider = determine_baud_rate(_settings[1].spi_d, _settings[1].clock);
+    _settings[1].dataMode = SPI_MODE0;
-    PinCfg.Funcnum = 2;
+    _settings[1].dataSize = DATA_SIZE_8BIT;
-    PinCfg.OpenDrain = 0;
+    _settings[1].clock = SPI_CLOCK_MAX;
-    PinCfg.Pinmode = 0;
+    //_settings[1].clockDivider = determine_baud_rate(_settings[1].spi_d, _settings[1].clock);
-    PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI2_SCK_PIN);
-    PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI2_SCK_PIN);
-    PINSEL_ConfigPin(&PinCfg);
-    SET_OUTPUT(BOARD_SPI2_SCK_PIN);
-
-    PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI2_MISO_PIN);
-    PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI2_MISO_PIN);
-    PINSEL_ConfigPin(&PinCfg);
-    SET_INPUT(BOARD_SPI2_MISO_PIN);
-
-    PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI2_MOSI_PIN);
-    PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI2_MOSI_PIN);
-    PINSEL_ConfigPin(&PinCfg);
-    SET_OUTPUT(BOARD_SPI2_MOSI_PIN);
   #endif
 
   setModule(device);
 
-  /* Initialize GPDMA controller */
+  // Init the GPDMA controller
-  //TODO: call once in the constructor? or each time?
+  // TODO: call once in the constructor? or each time?
   GPDMA_Init();
 }
 
 void SPIClass::begin() {
+  // Init the SPI pins in the first begin call
+  if ((_currentSetting->spi_d == LPC_SSP0 && spiInitialised[0] == false) ||
+      (_currentSetting->spi_d == LPC_SSP1 && spiInitialised[1] == false)) {
+    pin_t sck, miso, mosi;
+    if (_currentSetting->spi_d == LPC_SSP0) {
+      sck = BOARD_SPI1_SCK_PIN;
+      miso = BOARD_SPI1_MISO_PIN;
+      mosi = BOARD_SPI1_MOSI_PIN;
+      spiInitialised[0] = true;
+    }
+    else if (_currentSetting->spi_d == LPC_SSP1) {
+      sck = BOARD_SPI2_SCK_PIN;
+      miso = BOARD_SPI2_MISO_PIN;
+      mosi = BOARD_SPI2_MOSI_PIN;
+      spiInitialised[1] = true;
+    }
+    PINSEL_CFG_Type PinCfg;  // data structure to hold init values
+    PinCfg.Funcnum = 2;
+    PinCfg.OpenDrain = 0;
+    PinCfg.Pinmode = 0;
+    PinCfg.Pinnum = LPC176x::pin_bit(sck);
+    PinCfg.Portnum = LPC176x::pin_port(sck);
+    PINSEL_ConfigPin(&PinCfg);
+    SET_OUTPUT(sck);
+
+    PinCfg.Pinnum = LPC176x::pin_bit(miso);
+    PinCfg.Portnum = LPC176x::pin_port(miso);
+    PINSEL_ConfigPin(&PinCfg);
+    SET_INPUT(miso);
+
+    PinCfg.Pinnum = LPC176x::pin_bit(mosi);
+    PinCfg.Portnum = LPC176x::pin_port(mosi);
+    PINSEL_ConfigPin(&PinCfg);
+    SET_OUTPUT(mosi);
+  }
+
   updateSettings();
   SSP_Cmd(_currentSetting->spi_d, ENABLE);  // start SSP running
 }
@@ -287,7 +251,7 @@ void SPIClass::beginTransaction(const SPISettings &cfg) {
 }
 
 uint8_t SPIClass::transfer(const uint16_t b) {
-  /* send and receive a single byte */
+  // Send and receive a single byte
   SSP_ReceiveData(_currentSetting->spi_d); // read any previous data
   SSP_SendData(_currentSetting->spi_d, b);
   waitSpiTxEnd(_currentSetting->spi_d);  // wait for it to finish
@@ -295,8 +259,7 @@ uint8_t SPIClass::transfer(const uint16_t b) {
 }
 
 uint16_t SPIClass::transfer16(const uint16_t data) {
-  return (transfer((data >> 8) & 0xFF) << 8)
+  return (transfer((data >> 8) & 0xFF) << 8) | (transfer(data & 0xFF) & 0xFF);
-       | (transfer(data & 0xFF) & 0xFF);
 }
 
 void SPIClass::end() {
@@ -320,7 +283,7 @@ void SPIClass::dmaSend(void *buf, uint16_t length, bool minc) {
   // Destination memory - Not used
   GPDMACfg.DstMemAddr = 0;
   // Transfer size
-  GPDMACfg.TransferSize = (minc ? length : 1);
+  GPDMACfg.TransferSize = length;
   // Transfer width
   GPDMACfg.TransferWidth = (_currentSetting->dataSize == DATA_SIZE_16BIT) ? GPDMA_WIDTH_HALFWORD : GPDMA_WIDTH_BYTE;
   // Transfer type
@@ -335,26 +298,24 @@ void SPIClass::dmaSend(void *buf, uint16_t length, bool minc) {
   // Enable dma on SPI
   SSP_DMACmd(_currentSetting->spi_d, SSP_DMA_TX, ENABLE);
 
-  // if minc=false, I'm repeating the same byte 'length' times, as I could not find yet how do GPDMA without memory increment
+  // Only increase memory if minc is true
-  do {
+  GPDMACfg.MemoryIncrease = (minc ? GPDMA_DMACCxControl_SI : 0);
-    // Setup channel with given parameter
-    GPDMA_Setup(&GPDMACfg);
 
-    // enabled dma
+  // Setup channel with given parameter
-    GPDMA_ChannelCmd(0, ENABLE);
+  GPDMA_Setup(&GPDMACfg);
 
-    // wait data transfer
+  // Enable DMA
-    while (!GPDMA_IntGetStatus(GPDMA_STAT_INTTC, 0) && !GPDMA_IntGetStatus(GPDMA_STAT_INTERR, 0)) { }
+  GPDMA_ChannelCmd(0, ENABLE);
 
-    // clear err and int
+  // Wait for data transfer
-    GPDMA_ClearIntPending (GPDMA_STATCLR_INTTC, 0);
+  while (!GPDMA_IntGetStatus(GPDMA_STAT_RAWINTTC, 0) && !GPDMA_IntGetStatus(GPDMA_STAT_RAWINTERR, 0)) { }
-    GPDMA_ClearIntPending (GPDMA_STATCLR_INTERR, 0);
 
-    // dma disable
+  // Clear err and int
-    GPDMA_ChannelCmd(0, DISABLE);
+  GPDMA_ClearIntPending (GPDMA_STATCLR_INTTC, 0);
+  GPDMA_ClearIntPending (GPDMA_STATCLR_INTERR, 0);
 
-    --length;
+  // Disable DMA
-  } while (!minc && length > 0);
+  GPDMA_ChannelCmd(0, DISABLE);
 
   waitSpiTxEnd(_currentSetting->spi_d);
 
@@ -382,7 +343,7 @@ void SPIClass::setBitOrder(uint8_t bitOrder) {
 }
 
 void SPIClass::setDataMode(uint8_t dataMode) {
-  _currentSetting->dataSize = dataMode;
+  _currentSetting->dataMode = dataMode;
 }
 
 void SPIClass::setDataSize(uint32_t ds) {
@@ -413,19 +374,19 @@ void SPIClass::updateSettings() {
   switch (_currentSetting->dataMode) {
     case SPI_MODE0:
       HW_SPI_init.CPHA = SSP_CPHA_FIRST;
-	    HW_SPI_init.CPOL = SSP_CPOL_HI;
+      HW_SPI_init.CPOL = SSP_CPOL_HI;
       break;
     case SPI_MODE1:
       HW_SPI_init.CPHA = SSP_CPHA_SECOND;
-	    HW_SPI_init.CPOL = SSP_CPOL_HI;
+      HW_SPI_init.CPOL = SSP_CPOL_HI;
       break;
     case SPI_MODE2:
       HW_SPI_init.CPHA = SSP_CPHA_FIRST;
-	    HW_SPI_init.CPOL = SSP_CPOL_LO;
+      HW_SPI_init.CPOL = SSP_CPOL_LO;
       break;
     case SPI_MODE3:
       HW_SPI_init.CPHA = SSP_CPHA_SECOND;
-	    HW_SPI_init.CPOL = SSP_CPOL_LO;
+      HW_SPI_init.CPOL = SSP_CPOL_LO;
       break;
     default:
       break;

Marlin/src/HAL/LPC1768/MarlinSerial.cpp

@@ -24,28 +24,28 @@
 #include "../../inc/MarlinConfigPre.h"
 #include "MarlinSerial.h"
 
-#if (defined(SERIAL_PORT) && SERIAL_PORT == 0) || (defined(SERIAL_PORT_2) && SERIAL_PORT_2 == 0) || (defined(DGUS_SERIAL_PORT) && DGUS_SERIAL_PORT == 0)
+#if USING_SERIAL_0
   MarlinSerial MSerial(LPC_UART0);
   extern "C" void UART0_IRQHandler() {
     MSerial.IRQHandler();
   }
 #endif
 
-#if SERIAL_PORT == 1 || SERIAL_PORT_2 == 1 || DGUS_SERIAL_PORT == 1
+#if USING_SERIAL_1
   MarlinSerial MSerial1((LPC_UART_TypeDef *) LPC_UART1);
   extern "C" void UART1_IRQHandler() {
     MSerial1.IRQHandler();
   }
 #endif
 
-#if SERIAL_PORT == 2 || SERIAL_PORT_2 == 2 || DGUS_SERIAL_PORT == 2
+#if USING_SERIAL_2
   MarlinSerial MSerial2(LPC_UART2);
   extern "C" void UART2_IRQHandler() {
     MSerial2.IRQHandler();
   }
 #endif
 
-#if SERIAL_PORT == 3 || SERIAL_PORT_2 == 3 || DGUS_SERIAL_PORT == 3
+#if USING_SERIAL_3
   MarlinSerial MSerial3(LPC_UART3);
   extern "C" void UART3_IRQHandler() {
     MSerial3.IRQHandler();

Marlin/src/HAL/LPC1768/MarlinSerial.h

@@ -57,6 +57,7 @@ public:
     }
 
     EmergencyParser::State emergency_state;
+    static inline bool emergency_parser_enabled() { return true; }
   #endif
 };
 

Marlin/src/HAL/LPC1768/Servo.h

@@ -46,7 +46,6 @@
  *           Version 2 Copyright (c) 2009 Michael Margolis.  All right reserved.
  *
  * The only modification was to update/delete macros to match the LPC176x.
- *
  */
 
 #include <Servo.h>

Marlin/src/HAL/LPC1768/inc/SanityCheck.h

@@ -24,7 +24,7 @@
 #if PIO_PLATFORM_VERSION < 1001
   #error "nxplpc-arduino-lpc176x package is out of date, Please update the PlatformIO platforms, frameworks and libraries. You may need to remove the platform and let it reinstall automatically."
 #endif
-#if PIO_FRAMEWORK_VERSION < 2002
+#if PIO_FRAMEWORK_VERSION < 2005
   #error "framework-arduino-lpc176x package is out of date, Please update the PlatformIO platforms, frameworks and libraries."
 #endif
 
@@ -89,7 +89,10 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
  * Serial2 | P0_10 | P0_11 |
  * Serial3 | P0_00 | P0_01 |
  */
-#if (defined(SERIAL_PORT) && SERIAL_PORT == 0) || (defined(SERIAL_PORT_2) && SERIAL_PORT_2 == 0) || (defined(DGUS_SERIAL_PORT) && DGUS_SERIAL_PORT == 0)
+#define ANY_TX(N,V...) DO(IS_TX##N,||,V)
+#define ANY_RX(N,V...) DO(IS_RX##N,||,V)
+
+#if USING_SERIAL_0
   #define IS_TX0(P) (P == P0_02)
   #define IS_RX0(P) (P == P0_03)
   #if IS_TX0(TMC_SW_MISO) || IS_RX0(TMC_SW_MOSI)
@@ -103,60 +106,67 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
   #undef IS_RX0
 #endif
 
-#if SERIAL_PORT == 1 || SERIAL_PORT_2 == 1 || DGUS_SERIAL_PORT == 1
+#if USING_SERIAL_1
   #define IS_TX1(P) (P == P0_15)
   #define IS_RX1(P) (P == P0_16)
+  #define _IS_TX1_1 IS_TX1
+  #define _IS_RX1_1 IS_RX1
   #if IS_TX1(TMC_SW_SCK)
     #error "Serial port pins (1) conflict with other pins!"
-  #elif HAS_SPI_LCD
+  #elif HAS_WIRED_LCD
     #if IS_TX1(BTN_EN2) || IS_RX1(BTN_EN1)
       #error "Serial port pins (1) conflict with Encoder Buttons!"
-    #elif IS_TX1(SCK_PIN) || IS_TX1(LCD_PINS_D4) || IS_TX1(DOGLCD_SCK) || IS_TX1(LCD_RESET_PIN) || IS_TX1(LCD_PINS_RS) || IS_TX1(SHIFT_CLK) \
+    #elif ANY_TX(1, SCK_PIN, LCD_PINS_D4, DOGLCD_SCK, LCD_RESET_PIN, LCD_PINS_RS, SHIFT_CLK) \
-      || IS_RX1(LCD_SDSS) || IS_RX1(LCD_PINS_RS) || IS_RX1(MISO_PIN) || IS_RX1(DOGLCD_A0) || IS_RX1(SS_PIN) || IS_RX1(LCD_SDSS) || IS_RX1(DOGLCD_CS) || IS_RX1(LCD_RESET_PIN) || IS_RX1(LCD_BACKLIGHT_PIN)
+       || ANY_RX(1, LCD_SDSS, LCD_PINS_RS, MISO_PIN, DOGLCD_A0, SS_PIN, LCD_SDSS, DOGLCD_CS, LCD_RESET_PIN, LCD_BACKLIGHT_PIN)
       #error "Serial port pins (1) conflict with LCD pins!"
     #endif
   #endif
   #undef IS_TX1
   #undef IS_RX1
+  #undef _IS_TX1_1
+  #undef _IS_RX1_1
 #endif
 
-#if SERIAL_PORT == 2 || SERIAL_PORT_2 == 2 || DGUS_SERIAL_PORT == 2
+#if USING_SERIAL_2
   #define IS_TX2(P) (P == P0_10)
   #define IS_RX2(P) (P == P0_11)
-  #if  IS_TX2(X2_ENABLE_PIN) || IS_RX2(X2_DIR_PIN) || IS_RX2(X2_STEP_PIN) || (AXIS_HAS_SPI(X2) && IS_TX2(X2_CS_PIN))
+  #define _IS_TX2_1 IS_TX2
+  #define _IS_RX2_1 IS_RX2
+  #if IS_TX2(X2_ENABLE_PIN) || ANY_RX(2, X2_DIR_PIN, X2_STEP_PIN) || (AXIS_HAS_SPI(X2) && IS_TX2(X2_CS_PIN))
     #error "Serial port pins (2) conflict with X2 pins!"
-  #elif IS_TX2(Y2_ENABLE_PIN) || IS_RX2(Y2_DIR_PIN) || IS_RX2(Y2_STEP_PIN) || (AXIS_HAS_SPI(Y2) && IS_TX2(Y2_CS_PIN))
+  #elif IS_TX2(Y2_ENABLE_PIN) || ANY_RX(2, Y2_DIR_PIN, Y2_STEP_PIN) || (AXIS_HAS_SPI(Y2) && IS_TX2(Y2_CS_PIN))
     #error "Serial port pins (2) conflict with Y2 pins!"
-  #elif IS_TX2(Z2_ENABLE_PIN) || IS_RX2(Z2_DIR_PIN) || IS_RX2(Z2_STEP_PIN) || (AXIS_HAS_SPI(Z2) && IS_TX2(Z2_CS_PIN))
+  #elif IS_TX2(Z2_ENABLE_PIN) || ANY_RX(2, Z2_DIR_PIN, Z2_STEP_PIN) || (AXIS_HAS_SPI(Z2) && IS_TX2(Z2_CS_PIN))
     #error "Serial port pins (2) conflict with Z2 pins!"
-  #elif IS_TX2(Z3_ENABLE_PIN) || IS_RX2(Z3_DIR_PIN) || IS_RX2(Z3_STEP_PIN) || (AXIS_HAS_SPI(Z3) && IS_TX2(Z3_CS_PIN))
+  #elif IS_TX2(Z3_ENABLE_PIN) || ANY_RX(2, Z3_DIR_PIN, Z3_STEP_PIN) || (AXIS_HAS_SPI(Z3) && IS_TX2(Z3_CS_PIN))
     #error "Serial port pins (2) conflict with Z3 pins!"
-  #elif IS_TX2(Z4_ENABLE_PIN) || IS_RX2(Z4_DIR_PIN) || IS_RX2(Z4_STEP_PIN) || (AXIS_HAS_SPI(Z4) && IS_TX2(Z4_CS_PIN))
+  #elif IS_TX2(Z4_ENABLE_PIN) || ANY_RX(2, Z4_DIR_PIN, Z4_STEP_PIN) || (AXIS_HAS_SPI(Z4) && IS_TX2(Z4_CS_PIN))
     #error "Serial port pins (2) conflict with Z4 pins!"
-  #elif IS_RX2(X_DIR_PIN) || IS_RX2(Y_DIR_PIN)
+  #elif ANY_RX(2, X_DIR_PIN, Y_DIR_PIN)
     #error "Serial port pins (2) conflict with other pins!"
   #elif Y_HOME_DIR < 0 && IS_TX2(Y_STOP_PIN)
     #error "Serial port pins (2) conflict with Y endstop pin!"
   #elif HAS_CUSTOM_PROBE_PIN && IS_TX2(Z_MIN_PROBE_PIN)
     #error "Serial port pins (2) conflict with probe pin!"
-  #elif IS_TX2(X_ENABLE_PIN) || IS_RX2(X_DIR_PIN) || IS_TX2(Y_ENABLE_PIN) || IS_RX2(Y_DIR_PIN)
+  #elif ANY_TX(2, X_ENABLE_PIN, Y_ENABLE_PIN) || ANY_RX(2, X_DIR_PIN, Y_DIR_PIN)
     #error "Serial port pins (2) conflict with X/Y stepper pins!"
-  #elif EXTRUDERS > 1 && (IS_TX2(E1_ENABLE_PIN) || (AXIS_HAS_SPI(E1) && IS_TX2(E1_CS_PIN)))
+  #elif HAS_MULTI_EXTRUDER && (IS_TX2(E1_ENABLE_PIN) || (AXIS_HAS_SPI(E1) && IS_TX2(E1_CS_PIN)))
     #error "Serial port pins (2) conflict with E1 stepper pins!"
-  #elif EXTRUDERS && (IS_RX2(E0_DIR_PIN) || IS_RX2(E0_STEP_PIN))
+  #elif EXTRUDERS && ANY_RX(2, E0_DIR_PIN, E0_STEP_PIN)
     #error "Serial port pins (2) conflict with E stepper pins!"
   #endif
   #undef IS_TX2
   #undef IS_RX2
+  #undef _IS_TX2_1
+  #undef _IS_RX2_1
 #endif
 
-#if SERIAL_PORT == 3 || SERIAL_PORT_2 == 3 || DGUS_SERIAL_PORT == 3
+#if USING_SERIAL_3
   #define PIN_IS_TX3(P) (PIN_EXISTS(P) && P##_PIN == P0_00)
   #define PIN_IS_RX3(P) (P##_PIN == P0_01)
   #if PIN_IS_TX3(X_MIN) || PIN_IS_RX3(X_MAX)
     #error "Serial port pins (3) conflict with X endstop pins!"
-  #elif PIN_IS_TX3(Y_SERIAL_TX) || PIN_IS_TX3(Y_SERIAL_RX) \
+  #elif PIN_IS_TX3(Y_SERIAL_TX) || PIN_IS_TX3(Y_SERIAL_RX) || PIN_IS_RX3(X_SERIAL_TX) || PIN_IS_RX3(X_SERIAL_RX)
-    ||  PIN_IS_RX3(X_SERIAL_TX) || PIN_IS_RX3(X_SERIAL_RX)
     #error "Serial port pins (3) conflict with X/Y axis UART pins!"
   #elif PIN_IS_TX3(X2_DIR) || PIN_IS_RX3(X2_STEP)
     #error "Serial port pins (3) conflict with X2 pins!"
@@ -168,13 +178,16 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
     #error "Serial port pins (3) conflict with Z3 pins!"
   #elif PIN_IS_TX3(Z4_DIR) || PIN_IS_RX3(Z4_STEP)
     #error "Serial port pins (3) conflict with Z4 pins!"
-  #elif EXTRUDERS > 1 && (PIN_IS_TX3(E1_DIR) || PIN_IS_RX3(E1_STEP))
+  #elif HAS_MULTI_EXTRUDER && (PIN_IS_TX3(E1_DIR) || PIN_IS_RX3(E1_STEP))
     #error "Serial port pins (3) conflict with E1 pins!"
   #endif
   #undef PIN_IS_TX3
   #undef PIN_IS_RX3
 #endif
 
+#undef ANY_TX
+#undef ANY_RX
+
 //
 // Flag any i2c pin conflicts
 //
@@ -214,7 +227,7 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
       #error "One or more i2c (1) pins overlaps with Z3 pins! Disable i2c peripherals."
     #elif PIN_IS_SDA1(Z4_DIR) || PIN_IS_SCL1(Z4_STEP)
       #error "One or more i2c (1) pins overlaps with Z4 pins! Disable i2c peripherals."
-    #elif EXTRUDERS > 1 && (PIN_IS_SDA1(E1_DIR) || PIN_IS_SCL1(E1_STEP))
+    #elif HAS_MULTI_EXTRUDER && (PIN_IS_SDA1(E1_DIR) || PIN_IS_SCL1(E1_STEP))
       #error "One or more i2c (1) pins overlaps with E1 pins! Disable i2c peripherals."
     #endif
     #undef PIN_IS_SDA1
@@ -240,9 +253,9 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
       #error "i2c SDA2 overlaps with Z3 enable pin! Disable i2c peripherals."
     #elif PIN_IS_SDA2(Z4_ENABLE)
       #error "i2c SDA2 overlaps with Z4 enable pin! Disable i2c peripherals."
-    #elif EXTRUDERS > 1 && PIN_IS_SDA2(E1_ENABLE)
+    #elif HAS_MULTI_EXTRUDER && PIN_IS_SDA2(E1_ENABLE)
       #error "i2c SDA2 overlaps with E1 enable pin! Disable i2c peripherals."
-    #elif EXTRUDERS > 1 && AXIS_HAS_SPI(E1) && PIN_IS_SDA2(E1_CS)
+    #elif HAS_MULTI_EXTRUDER && AXIS_HAS_SPI(E1) && PIN_IS_SDA2(E1_CS)
       #error "i2c SDA2 overlaps with E1 CS pin! Disable i2c peripherals."
     #elif EXTRUDERS && (PIN_IS_SDA2(E0_STEP) || PIN_IS_SDA2(E0_DIR))
       #error "i2c SCL2 overlaps with E0 STEP/DIR pin! Disable i2c peripherals."

Marlin/src/HAL/LPC1768/include/SPI.h

@@ -61,7 +61,9 @@
 
 class SPISettings {
 public:
-  SPISettings(uint32_t speed, int, int) : spi_speed(speed) {};
+  SPISettings(uint32_t spiRate, int inBitOrder, int inDataMode) {
+    init_AlwaysInline(spiRate2Clock(spiRate), inBitOrder, inDataMode, DATA_SIZE_8BIT);
+  }
   SPISettings(uint32_t inClock, uint8_t inBitOrder, uint8_t inDataMode, uint32_t inDataSize) {
     if (__builtin_constant_p(inClock))
       init_AlwaysInline(inClock, inBitOrder, inDataMode, inDataSize);
@@ -72,7 +74,19 @@ public:
     init_AlwaysInline(4000000, MSBFIRST, SPI_MODE0, DATA_SIZE_8BIT);
   }
 
-  uint32_t spiRate() const { return spi_speed; }
+  //uint32_t spiRate() const { return spi_speed; }
+
+  static inline uint32_t spiRate2Clock(uint32_t spiRate) {
+    uint32_t Marlin_speed[7]; // CPSR is always 2
+    Marlin_speed[0] = 8333333; //(SCR:  2)  desired: 8,000,000  actual: 8,333,333  +4.2%  SPI_FULL_SPEED
+    Marlin_speed[1] = 4166667; //(SCR:  5)  desired: 4,000,000  actual: 4,166,667  +4.2%  SPI_HALF_SPEED
+    Marlin_speed[2] = 2083333; //(SCR: 11)  desired: 2,000,000  actual: 2,083,333  +4.2%  SPI_QUARTER_SPEED
+    Marlin_speed[3] = 1000000; //(SCR: 24)  desired: 1,000,000  actual: 1,000,000         SPI_EIGHTH_SPEED
+    Marlin_speed[4] =  500000; //(SCR: 49)  desired:   500,000  actual:   500,000         SPI_SPEED_5
+    Marlin_speed[5] =  250000; //(SCR: 99)  desired:   250,000  actual:   250,000         SPI_SPEED_6
+    Marlin_speed[6] =  125000; //(SCR:199)  desired:   125,000  actual:   125,000         Default from HAL.h
+    return Marlin_speed[spiRate > 6 ? 6 : spiRate];
+  }
 
 private:
   void init_MightInline(uint32_t inClock, uint8_t inBitOrder, uint8_t inDataMode, uint32_t inDataSize) {
@@ -85,7 +99,7 @@ private:
     dataSize = inDataSize;
   }
 
-  uint32_t spi_speed;
+  //uint32_t spi_speed;
   uint32_t clock;
   uint32_t dataSize;
   //uint32_t clockDivider;
@@ -122,7 +136,7 @@ public:
   void end();
 
   void beginTransaction(const SPISettings&);
-  void endTransaction() {};
+  void endTransaction() {}
 
   // Transfer using 1 "Data Size"
   uint8_t transfer(uint16_t data);

Marlin/src/HAL/LPC1768/spi_pins.h

@@ -23,7 +23,7 @@
 
 #include "../../core/macros.h"
 
-#if BOTH(SDSUPPORT, HAS_GRAPHICAL_LCD) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
+#if BOTH(SDSUPPORT, HAS_MARLINUI_U8GLIB) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
   #define LPC_SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                             // needed due to the speed and mode required for communicating with each device being different.
                             // This requirement can be removed if the SPI access to these devices is updated to use

Marlin/src/HAL/LPC1768/tft/xpt2046.cpp

@@ -72,7 +72,6 @@ bool XPT2046::getRawPoint(int16_t *x, int16_t *y) {
   if (!isTouched()) return false;
   *x = getRawData(XPT2046_X);
   *y = getRawData(XPT2046_Y);
-  SERIAL_ECHOLNPAIR("X: ", *x, ", Y: ", *y);
   return isTouched();
 }
 

Marlin/src/HAL/LPC1768/timers.h

@@ -21,7 +21,6 @@
 #pragma once
 
 /**
- *
  * HAL For LPC1768
  */
 

Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_hw_spi.cpp

@@ -57,7 +57,7 @@
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_GRAPHICAL_LCD
+#if HAS_MARLINUI_U8GLIB
 
 #include <U8glib.h>
 #include "../../shared/HAL_SPI.h"
@@ -124,6 +124,6 @@ uint8_t u8g_com_HAL_LPC1768_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
   return 1;
 }
 
-#endif // HAS_GRAPHICAL_LCD
+#endif // HAS_MARLINUI_U8GLIB
 
 #endif // TARGET_LPC1768

Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp

@@ -77,7 +77,7 @@
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_GRAPHICAL_LCD
+#if HAS_MARLINUI_U8GLIB
 
 #include <U8glib.h>
 
@@ -193,6 +193,6 @@ uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_v
   return 1;
 }
 
-#endif // HAS_GRAPHICAL_LCD
+#endif // HAS_MARLINUI_U8GLIB
 
 #endif // TARGET_LPC1768

Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp

@@ -57,7 +57,7 @@
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_GRAPHICAL_LCD
+#if HAS_MARLINUI_U8GLIB
 
 #include <U8glib.h>
 #include "../../shared/HAL_SPI.h"
@@ -133,6 +133,6 @@ uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t ar
   return 1;
 }
 
-#endif // HAS_GRAPHICAL_LCD
+#endif // HAS_MARLINUI_U8GLIB
 
 #endif // TARGET_LPC1768

Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp

@@ -57,7 +57,7 @@
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_GRAPHICAL_LCD && DISABLED(U8GLIB_ST7920)
+#if HAS_MARLINUI_U8GLIB && DISABLED(U8GLIB_ST7920)
 
 #include <SoftwareSPI.h>
 
@@ -203,5 +203,5 @@ uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
   return 1;
 }
 
-#endif // HAS_GRAPHICAL_LCD && !U8GLIB_ST7920
+#endif // HAS_MARLINUI_U8GLIB && !U8GLIB_ST7920
 #endif // TARGET_LPC1768

Marlin/src/HAL/LPC1768/usb_serial.cpp

@@ -26,7 +26,9 @@
 #if ENABLED(EMERGENCY_PARSER)
 
 #include "../../feature/e_parser.h"
+
 EmergencyParser::State emergency_state;
+
 bool CDC_RecvCallback(const char buffer) {
   emergency_parser.update(emergency_state, buffer);
   return true;

Marlin/src/HAL/SAMD51/HAL.h

@@ -35,58 +35,34 @@
 
   // MYSERIAL0 required before MarlinSerial includes!
 
+  #define _MSERIAL(X) Serial##X
+  #define MSERIAL(X) _MSERIAL(INCREMENT(X))
+
   #if SERIAL_PORT == -1
     #define MYSERIAL0 Serial
-  #elif SERIAL_PORT == 0
+  #elif WITHIN(SERIAL_PORT, 0, 3)
-    #define MYSERIAL0 Serial1
+    #define MYSERIAL0 MSERIAL(SERIAL_PORT)
-  #elif SERIAL_PORT == 1
-    #define MYSERIAL0 Serial2
-  #elif SERIAL_PORT == 2
-    #define MYSERIAL0 Serial3
-  #elif SERIAL_PORT == 3
-    #define MYSERIAL0 Serial4
   #else
     #error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
   #endif
 
   #ifdef SERIAL_PORT_2
-    #if SERIAL_PORT_2 == SERIAL_PORT
+    #if SERIAL_PORT_2 == -1
-      #error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
-    #elif SERIAL_PORT_2 == -1
       #define MYSERIAL1 Serial
-    #elif SERIAL_PORT_2 == 0
+    #elif WITHIN(SERIAL_PORT_2, 0, 3)
-      #define MYSERIAL1 Serial1
+      #define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
-    #elif SERIAL_PORT_2 == 1
-      #define MYSERIAL1 Serial2
-    #elif SERIAL_PORT_2 == 2
-      #define MYSERIAL1 Serial3
-    #elif SERIAL_PORT_2 == 3
-      #define MYSERIAL1 Serial4
     #else
       #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
     #endif
-    #define NUM_SERIAL 2
-  #else
-    #define NUM_SERIAL 1
   #endif
 
-  #ifdef DGUS_SERIAL_PORT
+  #ifdef LCD_SERIAL_PORT
-    #if DGUS_SERIAL_PORT == SERIAL_PORT
+    #if LCD_SERIAL_PORT == -1
-      #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
+      #define LCD_SERIAL Serial
-    #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
+    #elif WITHIN(LCD_SERIAL_PORT, 0, 3)
-      #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
+      #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
-    #elif DGUS_SERIAL_PORT == -1
-      #define DGUS_SERIAL Serial
-    #elif DGUS_SERIAL_PORT == 0
-      #define DGUS_SERIAL Serial1
-    #elif DGUS_SERIAL_PORT == 1
-      #define DGUS_SERIAL Serial2
-    #elif DGUS_SERIAL_PORT == 2
-      #define DGUS_SERIAL Serial3
-    #elif DGUS_SERIAL_PORT == 2
-      #define DGUS_SERIAL Serial4
     #else
-      #error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
+      #error "LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration."
     #endif
   #endif
 

Marlin/src/HAL/SAMD51/QSPIFlash.h

@@ -24,7 +24,6 @@
  * THE SOFTWARE.
  *
  * Derived from Adafruit_SPIFlash class with no SdFat references
- *
  */
 
 #pragma once

Marlin/src/HAL/SAMD51/pinsDebug.h

@@ -150,5 +150,4 @@ void pwm_details(int32_t pin) {
  *  93             |  PA10  | QSPI: IO2
  *  94             |  PA11  | QSPI: IO3
  *  95             |  PB31  | SD: DETECT
- *
  */

Marlin/src/HAL/STM32/HAL.h

@@ -43,83 +43,40 @@
 // ------------------------
 // Defines
 // ------------------------
+#define _MSERIAL(X) MSerial##X
+#define MSERIAL(X) _MSERIAL(X)
 
-#if SERIAL_PORT == 0
+#if SERIAL_PORT == -1
-  #error "SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration."
-#elif SERIAL_PORT == -1
   #define MYSERIAL0 SerialUSB
-#elif SERIAL_PORT == 1
+#elif WITHIN(SERIAL_PORT, 1, 6)
-  #define MYSERIAL0 MSerial1
+  #define MYSERIAL0 MSERIAL(SERIAL_PORT)
-#elif SERIAL_PORT == 2
-  #define MYSERIAL0 MSerial2
-#elif SERIAL_PORT == 3
-  #define MYSERIAL0 MSerial3
-#elif SERIAL_PORT == 4
-  #define MYSERIAL0 MSerial4
-#elif SERIAL_PORT == 5
-  #define MYSERIAL0 MSerial5
-#elif SERIAL_PORT == 6
-  #define MYSERIAL0 MSerial6
 #else
-  #error "SERIAL_PORT must be from -1 to 6. Please update your configuration."
+  #error "SERIAL_PORT must be -1 or from 1 to 6. Please update your configuration."
 #endif
 
 #ifdef SERIAL_PORT_2
-  #define NUM_SERIAL 2
+  #if SERIAL_PORT_2 == -1
-  #if SERIAL_PORT_2 == 0
-    #error "SERIAL_PORT_2 cannot be 0. (Port 0 does not exist.) Please update your configuration."
-  #elif SERIAL_PORT_2 == SERIAL_PORT
-    #error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
-  #elif SERIAL_PORT_2 == -1
     #define MYSERIAL1 SerialUSB
-  #elif SERIAL_PORT_2 == 1
+  #elif WITHIN(SERIAL_PORT_2, 1, 6)
-    #define MYSERIAL1 MSerial1
+    #define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
-  #elif SERIAL_PORT_2 == 2
-    #define MYSERIAL1 MSerial2
-  #elif SERIAL_PORT_2 == 3
-    #define MYSERIAL1 MSerial3
-  #elif SERIAL_PORT_2 == 4
-    #define MYSERIAL1 MSerial4
-  #elif SERIAL_PORT_2 == 5
-    #define MYSERIAL1 MSerial5
-  #elif SERIAL_PORT_2 == 6
-    #define MYSERIAL1 MSerial6
   #else
-    #error "SERIAL_PORT_2 must be from -1 to 6. Please update your configuration."
+    #error "SERIAL_PORT_2 must be -1 or from 1 to 6. Please update your configuration."
   #endif
-#else
-  #define NUM_SERIAL 1
 #endif
 
-#if HAS_DGUS_LCD
+#ifdef LCD_SERIAL_PORT
-  #if DGUS_SERIAL_PORT == 0
+  #if LCD_SERIAL_PORT == -1
-    #error "DGUS_SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration."
+    #define LCD_SERIAL SerialUSB
-  #elif DGUS_SERIAL_PORT == SERIAL_PORT
+  #elif WITHIN(LCD_SERIAL_PORT, 1, 6)
-    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
+    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
-  #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
-    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
-  #elif DGUS_SERIAL_PORT == -1
-    #define DGUS_SERIAL SerialUSB
-  #elif DGUS_SERIAL_PORT == 1
-    #define DGUS_SERIAL MSerial1
-  #elif DGUS_SERIAL_PORT == 2
-    #define DGUS_SERIAL MSerial2
-  #elif DGUS_SERIAL_PORT == 3
-    #define DGUS_SERIAL MSerial3
-  #elif DGUS_SERIAL_PORT == 4
-    #define DGUS_SERIAL MSerial4
-  #elif DGUS_SERIAL_PORT == 5
-    #define DGUS_SERIAL MSerial5
-  #elif DGUS_SERIAL_PORT == 6
-    #define DGUS_SERIAL MSerial6
   #else
-    #error "DGUS_SERIAL_PORT must be from -1 to 6. Please update your configuration."
+    #error "LCD_SERIAL_PORT must be -1 or from 1 to 6. Please update your configuration."
+  #endif
+  #if HAS_DGUS_LCD
+    #define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.availableForWrite()
   #endif
-
-  #define DGUS_SERIAL_GET_TX_BUFFER_FREE DGUS_SERIAL.availableForWrite
 #endif
 
-
 /**
  * TODO: review this to return 1 for pins that are not analog input
  */

Marlin/src/HAL/STM32/MarlinSerial.cpp

@@ -49,16 +49,14 @@
   DECLARE_SERIAL_PORT_EXP(SERIAL_PORT_2)
 #endif
 
-#if defined(DGUS_SERIAL_PORT) && DGUS_SERIAL_PORT >= 0
+#if defined(LCD_SERIAL_PORT) && LCD_SERIAL_PORT >= 0
-  DECLARE_SERIAL_PORT_EXP(DGUS_SERIAL_PORT)
+  DECLARE_SERIAL_PORT_EXP(LCD_SERIAL_PORT)
 #endif
 
 void MarlinSerial::begin(unsigned long baud, uint8_t config) {
   HardwareSerial::begin(baud, config);
-  // replace the IRQ callback with the one we have defined
+  // Replace the IRQ callback with the one we have defined
-  #if ENABLED(EMERGENCY_PARSER)
+  TERN_(EMERGENCY_PARSER, _serial.rx_callback = _rx_callback);
-    _serial.rx_callback = _rx_callback;
-  #endif
 }
 
 // This function is Copyright (c) 2006 Nicholas Zambetti.

Marlin/src/HAL/STM32/MarlinSerial.h

@@ -35,6 +35,10 @@ public:
       #endif
   { }
 
+  #if ENABLED(EMERGENCY_PARSER)
+    static inline bool emergency_parser_enabled() { return true; }
+  #endif
+
   void begin(unsigned long baud, uint8_t config);
   inline void begin(unsigned long baud) { begin(baud, SERIAL_8N1); }
 

Marlin/src/HAL/STM32/SoftwareSerial.cpp

@@ -1,396 +0,0 @@
-/*
- * SoftwareSerial.cpp (formerly NewSoftSerial.cpp)
- *
- * Multi-instance software serial library for Arduino/Wiring
- * -- Interrupt-driven receive and other improvements by ladyada
- *    <https://ladyada.net>
- * -- Tuning, circular buffer, derivation from class Print/Stream,
- *    multi-instance support, porting to 8MHz processors,
- *    various optimizations, PROGMEM delay tables, inverse logic and
- *    direct port writing by Mikal Hart <http://www.arduiniana.org>
- * -- Pin change interrupt macros by Paul Stoffregen <https://www.pjrc.com>
- * -- 20MHz processor support by Garrett Mace <http://www.macetech.com>
- * -- ATmega1280/2560 support by Brett Hagman <https://www.roguerobotics.com>
- * -- STM32 support by Armin van der Togt
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * The latest version of this library can always be found at
- * http://arduiniana.org.
- */
-
-//
-// Includes
-//
-#if defined(PLATFORMIO) && defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
-
-#include "../../inc/MarlinConfig.h"
-
-#include "SoftwareSerial.h"
-
-#define OVERSAMPLE 3 // in RX, Timer will generate interruption OVERSAMPLE time during a bit. Thus OVERSAMPLE ticks in a bit. (interrupt not synchonized with edge).
-
-// defined in bit-periods
-#define HALFDUPLEX_SWITCH_DELAY 5
-// It's best to define TIMER_SERIAL in variant.h. If not defined, we choose one here
-// The order is based on (lack of) features and compare channels, we choose the simplest available
-// because we only need an update interrupt
-#if !defined(TIMER_SERIAL)
-#if  defined(TIM18_BASE)
-#define TIMER_SERIAL TIM18
-#elif defined(TIM7_BASE)
-#define TIMER_SERIAL TIM7
-#elif defined(TIM6_BASE)
-#define TIMER_SERIAL TIM6
-#elif defined(TIM22_BASE)
-#define TIMER_SERIAL TIM22
-#elif defined(TIM21_BASE)
-#define TIMER_SERIAL TIM21
-#elif defined(TIM17_BASE)
-#define TIMER_SERIAL TIM17
-#elif defined(TIM16_BASE)
-#define TIMER_SERIAL TIM16
-#elif defined(TIM15_BASE)
-#define TIMER_SERIAL TIM15
-#elif defined(TIM14_BASE)
-#define TIMER_SERIAL TIM14
-#elif defined(TIM13_BASE)
-#define TIMER_SERIAL TIM13
-#elif defined(TIM11_BASE)
-#define TIMER_SERIAL TIM11
-#elif defined(TIM10_BASE)
-#define TIMER_SERIAL TIM10
-#elif defined(TIM12_BASE)
-#define TIMER_SERIAL TIM12
-#elif defined(TIM19_BASE)
-#define TIMER_SERIAL TIM19
-#elif defined(TIM9_BASE)
-#define TIMER_SERIAL TIM9
-#elif defined(TIM5_BASE)
-#define TIMER_SERIAL TIM5
-#elif defined(TIM4_BASE)
-#define TIMER_SERIAL TIM4
-#elif defined(TIM3_BASE)
-#define TIMER_SERIAL TIM3
-#elif defined(TIM2_BASE)
-#define TIMER_SERIAL TIM2
-#elif defined(TIM20_BASE)
-#define TIMER_SERIAL TIM20
-#elif defined(TIM8_BASE)
-#define TIMER_SERIAL TIM8
-#elif defined(TIM1_BASE)
-#define TIMER_SERIAL TIM1
-#else
-#error No suitable timer found for SoftwareSerial, define TIMER_SERIAL in variant.h
-#endif
-#endif
-//
-// Statics
-//
-HardwareTimer SoftwareSerial::timer(TIMER_SERIAL);
-const IRQn_Type SoftwareSerial::timer_interrupt_number = static_cast<IRQn_Type>(getTimerUpIrq(TIMER_SERIAL));
-uint32_t SoftwareSerial::timer_interrupt_priority = NVIC_EncodePriority(NVIC_GetPriorityGrouping(), TIM_IRQ_PRIO, TIM_IRQ_SUBPRIO);
-SoftwareSerial *SoftwareSerial::active_listener = nullptr;
-SoftwareSerial *volatile SoftwareSerial::active_out = nullptr;
-SoftwareSerial *volatile SoftwareSerial::active_in = nullptr;
-int32_t SoftwareSerial::tx_tick_cnt = 0; // OVERSAMPLE ticks needed for a bit
-int32_t volatile SoftwareSerial::rx_tick_cnt = 0;  // OVERSAMPLE ticks needed for a bit
-uint32_t SoftwareSerial::tx_buffer = 0;
-int32_t SoftwareSerial::tx_bit_cnt = 0;
-uint32_t SoftwareSerial::rx_buffer = 0;
-int32_t SoftwareSerial::rx_bit_cnt = -1; // rx_bit_cnt = -1 :  waiting for start bit
-uint32_t SoftwareSerial::cur_speed = 0;
-
-void SoftwareSerial::setInterruptPriority(uint32_t preemptPriority, uint32_t subPriority) {
-  timer_interrupt_priority = NVIC_EncodePriority(NVIC_GetPriorityGrouping(), preemptPriority, subPriority);
-}
-
-//
-// Private methods
-//
-
-void SoftwareSerial::setSpeed(uint32_t speed) {
-  if (speed != cur_speed) {
-    timer.pause();
-    if (speed != 0) {
-      // Disable the timer
-      uint32_t clock_rate, cmp_value;
-      // Get timer clock
-      clock_rate = timer.getTimerClkFreq();
-      int pre = 1;
-      // Calculate prescale an compare value
-      do {
-        cmp_value = clock_rate / (speed * OVERSAMPLE);
-        if (cmp_value >= UINT16_MAX) {
-          clock_rate /= 2;
-          pre *= 2;
-        }
-      } while (cmp_value >= UINT16_MAX);
-      timer.setPrescaleFactor(pre);
-      timer.setOverflow(cmp_value);
-      timer.setCount(0);
-      timer.attachInterrupt(&handleInterrupt);
-      timer.resume();
-      NVIC_SetPriority(timer_interrupt_number, timer_interrupt_priority);
-    }
-    else
-      timer.detachInterrupt();
-    cur_speed = speed;
-  }
-}
-
-// This function sets the current object as the "listening"
-// one and returns true if it replaces another
-bool SoftwareSerial::listen() {
-  if (active_listener != this) {
-    // wait for any transmit to complete as we may change speed
-    while (active_out);
-    active_listener->stopListening();
-    rx_tick_cnt = 1; // 1 : next interrupt will decrease rx_tick_cnt to 0 which means RX pin level will be considered.
-    rx_bit_cnt = -1; // rx_bit_cnt = -1 :  waiting for start bit
-    setSpeed(_speed);
-    active_listener = this;
-    if (!_half_duplex) active_in = this;
-    return true;
-  }
-  return false;
-}
-
-// Stop listening. Returns true if we were actually listening.
-bool SoftwareSerial::stopListening() {
-  if (active_listener == this) {
-    // wait for any output to complete
-    while (active_out);
-    if (_half_duplex) setRXTX(false);
-    active_listener = nullptr;
-    active_in = nullptr;
-    // turn off ints
-    setSpeed(0);
-    return true;
-  }
-  return false;
-}
-
-inline void SoftwareSerial::setTX() {
-  if (_inverse_logic)
-    LL_GPIO_ResetOutputPin(_transmitPinPort, _transmitPinNumber);
-  else
-    LL_GPIO_SetOutputPin(_transmitPinPort, _transmitPinNumber);
-  pinMode(_transmitPin, OUTPUT);
-}
-
-inline void SoftwareSerial::setRX() {
-  pinMode(_receivePin, _inverse_logic ? INPUT_PULLDOWN : INPUT_PULLUP); // pullup for normal logic!
-}
-
-inline void SoftwareSerial::setRXTX(bool input) {
-  if (_half_duplex) {
-    if (input) {
-      if (active_in != this) {
-        setRX();
-        rx_bit_cnt = -1; // rx_bit_cnt = -1 :  waiting for start bit
-        rx_tick_cnt = 2; // 2 : next interrupt will be discarded. 2 interrupts required to consider RX pin level
-        active_in = this;
-      }
-    }
-    else {
-      if (active_in == this) {
-        setTX();
-        active_in = nullptr;
-      }
-    }
-  }
-}
-
-inline void SoftwareSerial::send() {
-  if (--tx_tick_cnt <= 0) { // if tx_tick_cnt > 0 interrupt is discarded. Only when tx_tick_cnt reaches 0 is TX pin set.
-    if (tx_bit_cnt++ < 10) { // tx_bit_cnt < 10 transmission is not finished (10 = 1 start +8 bits + 1 stop)
-      // Send data (including start and stop bits)
-      if (tx_buffer & 1)
-        LL_GPIO_SetOutputPin(_transmitPinPort, _transmitPinNumber);
-      else
-        LL_GPIO_ResetOutputPin(_transmitPinPort, _transmitPinNumber);
-      tx_buffer >>= 1;
-      tx_tick_cnt = OVERSAMPLE; // Wait OVERSAMPLE ticks to send next bit
-    }
-    else { // Transmission finished
-      tx_tick_cnt = 1;
-      if (_output_pending) {
-        active_out = nullptr;
-
-        // In half-duplex mode wait HALFDUPLEX_SWITCH_DELAY bit-periods after the byte has
-        // been transmitted before allowing the switch to RX mode
-      }
-      else if (tx_bit_cnt > 10 + OVERSAMPLE * HALFDUPLEX_SWITCH_DELAY) {
-        if (_half_duplex && active_listener == this) setRXTX(true);
-        active_out = nullptr;
-      }
-    }
-  }
-}
-
-//
-// The receive routine called by the interrupt handler
-//
-inline void SoftwareSerial::recv() {
-  if (--rx_tick_cnt <= 0) { // if rx_tick_cnt > 0 interrupt is discarded. Only when rx_tick_cnt reaches 0 is RX pin considered
-    bool inbit = LL_GPIO_IsInputPinSet(_receivePinPort, _receivePinNumber) ^ _inverse_logic;
-    if (rx_bit_cnt == -1) {  // rx_bit_cnt = -1 :  waiting for start bit
-      if (!inbit) {
-        // got start bit
-        rx_bit_cnt = 0; // rx_bit_cnt == 0 : start bit received
-        rx_tick_cnt = OVERSAMPLE + 1; // Wait 1 bit (OVERSAMPLE ticks) + 1 tick in order to sample RX pin in the middle of the edge (and not too close to the edge)
-        rx_buffer = 0;
-      }
-      else
-        rx_tick_cnt = 1; // Waiting for start bit, but wrong level. Wait for next Interrupt to check RX pin level
-    }
-    else if (rx_bit_cnt >= 8) { // rx_bit_cnt >= 8 : waiting for stop bit
-      if (inbit) {
-        // Stop-bit read complete. Add to buffer.
-        uint8_t next = (_receive_buffer_tail + 1) % _SS_MAX_RX_BUFF;
-        if (next != _receive_buffer_head) {
-          // save new data in buffer: tail points to byte destination
-          _receive_buffer[_receive_buffer_tail] = rx_buffer; // save new byte
-          _receive_buffer_tail = next;
-        }
-        else // rx_bit_cnt = x  with x = [0..7] correspond to new bit x received
-          _buffer_overflow = true;
-      }
-      // Full trame received. Restart waiting for start bit at next interrupt
-      rx_tick_cnt = 1;
-      rx_bit_cnt = -1;
-    }
-    else {
-      // data bits
-      rx_buffer >>= 1;
-      if (inbit) rx_buffer |= 0x80;
-      rx_bit_cnt++; // Prepare for next bit
-      rx_tick_cnt = OVERSAMPLE; // Wait OVERSAMPLE ticks before sampling next bit
-    }
-  }
-}
-
-//
-// Interrupt handling
-//
-
-/* static */
-inline void SoftwareSerial::handleInterrupt(HardwareTimer*) {
-  if (active_in)   active_in->recv();
-  if (active_out) active_out->send();
-}
-
-//
-// Constructor
-//
-SoftwareSerial::SoftwareSerial(uint16_t receivePin, uint16_t transmitPin, bool inverse_logic /* = false */) :
-  _receivePin(receivePin),
-  _transmitPin(transmitPin),
-  _receivePinPort(digitalPinToPort(receivePin)),
-  _receivePinNumber(STM_LL_GPIO_PIN(digitalPinToPinName(receivePin))),
-  _transmitPinPort(digitalPinToPort(transmitPin)),
-  _transmitPinNumber(STM_LL_GPIO_PIN(digitalPinToPinName(transmitPin))),
-  _speed(0),
-  _buffer_overflow(false),
-  _inverse_logic(inverse_logic),
-  _half_duplex(receivePin == transmitPin),
-  _output_pending(0),
-  _receive_buffer_tail(0),
-  _receive_buffer_head(0)
-{
-  if ((receivePin < NUM_DIGITAL_PINS) || (transmitPin < NUM_DIGITAL_PINS)) {
-    /* Enable GPIO clock for tx and rx pin*/
-    set_GPIO_Port_Clock(STM_PORT(digitalPinToPinName(transmitPin)));
-    set_GPIO_Port_Clock(STM_PORT(digitalPinToPinName(receivePin)));
-  }
-  else
-    _Error_Handler("ERROR: invalid pin number\n", -1);
-}
-
-//
-// Destructor
-//
-SoftwareSerial::~SoftwareSerial() { end(); }
-
-//
-// Public methods
-//
-
-void SoftwareSerial::begin(long speed) {
-  #ifdef FORCE_BAUD_RATE
-    speed = FORCE_BAUD_RATE;
-  #endif
-  _speed = speed;
-  if (!_half_duplex) {
-    setTX();
-    setRX();
-    listen();
-  }
-  else
-    setTX();
-}
-
-void SoftwareSerial::end() {
-  stopListening();
-}
-
-// Read data from buffer
-int SoftwareSerial::read() {
-  // Empty buffer?
-  if (_receive_buffer_head == _receive_buffer_tail) return -1;
-
-  // Read from "head"
-  uint8_t d = _receive_buffer[_receive_buffer_head]; // grab next byte
-  _receive_buffer_head = (_receive_buffer_head + 1) % _SS_MAX_RX_BUFF;
-  return d;
-}
-
-int SoftwareSerial::available() {
-  return (_receive_buffer_tail + _SS_MAX_RX_BUFF - _receive_buffer_head) % _SS_MAX_RX_BUFF;
-}
-
-size_t SoftwareSerial::write(uint8_t b) {
-  // wait for previous transmit to complete
-  _output_pending = 1;
-  while (active_out) { /* nada */ }
-  // add start and stop bits.
-  tx_buffer = b << 1 | 0x200;
-  if (_inverse_logic) tx_buffer = ~tx_buffer;
-  tx_bit_cnt = 0;
-  tx_tick_cnt = OVERSAMPLE;
-  setSpeed(_speed);
-  if (_half_duplex) setRXTX(false);
-  _output_pending = 0;
-  // make us active
-  active_out = this;
-  return 1;
-}
-
-void SoftwareSerial::flush() {
-  noInterrupts();
-  _receive_buffer_head = _receive_buffer_tail = 0;
-  interrupts();
-}
-
-int SoftwareSerial::peek() {
-  // Empty buffer?
-  if (_receive_buffer_head == _receive_buffer_tail) return -1;
-
-  // Read from "head"
-  return _receive_buffer[_receive_buffer_head];
-}
-
-#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC

Marlin/src/HAL/STM32/SoftwareSerial.h

@@ -1,114 +0,0 @@
-/**
- * SoftwareSerial.h (formerly NewSoftSerial.h)
- *
- * Multi-instance software serial library for Arduino/Wiring
- * -- Interrupt-driven receive and other improvements by ladyada
- *    (https://ladyada.net)
- * -- Tuning, circular buffer, derivation from class Print/Stream,
- *    multi-instance support, porting to 8MHz processors,
- *    various optimizations, PROGMEM delay tables, inverse logic and
- *    direct port writing by Mikal Hart (http://www.arduiniana.org)
- * -- Pin change interrupt macros by Paul Stoffregen (https://www.pjrc.com)
- * -- 20MHz processor support by Garrett Mace (http://www.macetech.com)
- * -- ATmega1280/2560 support by Brett Hagman (https://www.roguerobotics.com/)
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * The latest version of this library can always be found at
- * http://arduiniana.org.
- */
-#pragma once
-
-#include <Arduino.h>
-
-/******************************************************************************
- * Definitions
- ******************************************************************************/
-
-#define _SS_MAX_RX_BUFF 64 // RX buffer size
-
-class SoftwareSerial : public Stream {
-  private:
-    // per object data
-    uint16_t _receivePin;
-    uint16_t _transmitPin;
-    GPIO_TypeDef *_receivePinPort;
-    uint32_t _receivePinNumber;
-    GPIO_TypeDef *_transmitPinPort;
-    uint32_t _transmitPinNumber;
-    uint32_t _speed;
-
-    uint16_t _buffer_overflow: 1;
-    uint16_t _inverse_logic: 1;
-    uint16_t _half_duplex: 1;
-    uint16_t _output_pending: 1;
-
-    unsigned char _receive_buffer[_SS_MAX_RX_BUFF];
-    volatile uint8_t _receive_buffer_tail;
-    volatile uint8_t _receive_buffer_head;
-
-    uint32_t delta_start = 0;
-
-    // static data
-    static HardwareTimer timer;
-    static const IRQn_Type timer_interrupt_number;
-    static uint32_t timer_interrupt_priority;
-    static SoftwareSerial *active_listener;
-    static SoftwareSerial *volatile active_out;
-    static SoftwareSerial *volatile active_in;
-    static int32_t tx_tick_cnt;
-    static volatile int32_t rx_tick_cnt;
-    static uint32_t tx_buffer;
-    static int32_t tx_bit_cnt;
-    static uint32_t rx_buffer;
-    static int32_t rx_bit_cnt;
-    static uint32_t cur_speed;
-
-    // private methods
-    void send();
-    void recv();
-    void setTX();
-    void setRX();
-    void setSpeed(uint32_t speed);
-    void setRXTX(bool input);
-    static void handleInterrupt(HardwareTimer *timer);
-
-  public:
-    // public methods
-
-    SoftwareSerial(uint16_t receivePin, uint16_t transmitPin, bool inverse_logic=false);
-    virtual ~SoftwareSerial();
-    void begin(long speed);
-    bool listen();
-    void end();
-    bool isListening() { return active_listener == this; }
-    bool stopListening();
-    bool overflow() {
-      bool ret = _buffer_overflow;
-      if (ret) _buffer_overflow = false;
-      return ret;
-    }
-    int peek();
-
-    virtual size_t write(uint8_t byte);
-    virtual int read();
-    virtual int available();
-    virtual void flush();
-    operator bool() { return true; }
-
-    static void setInterruptPriority(uint32_t preemptPriority, uint32_t subPriority);
-
-    using Print::write;
-};

Marlin/src/HAL/STM32/pinsDebug_STM32GENERIC.h

@@ -98,7 +98,7 @@ static inline void pwm_details(const pin_t pin) {
     timer_dev * const tdev = PIN_MAP[pin].timer_device;
     const uint8_t channel = PIN_MAP[pin].timer_channel;
     const char num = (
-      #if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY)
+      #if EITHER(STM32_HIGH_DENSITY, STM32_XL_DENSITY)
         tdev == &timer8 ? '8' :
         tdev == &timer5 ? '5' :
       #endif

Marlin/src/HAL/STM32/tft/tft_fsmc.cpp

@@ -87,7 +87,7 @@ void TFT_FSMC::Init() {
 
   __HAL_RCC_FSMC_CLK_ENABLE();
 
-  for(uint16_t i = 0; PinMap_FSMC[i].pin != NC; i++)
+  for (uint16_t i = 0; PinMap_FSMC[i].pin != NC; i++)
     pinmap_pinout(PinMap_FSMC[i].pin, PinMap_FSMC);
   pinmap_pinout(digitalPinToPinName(TFT_CS_PIN), PinMap_FSMC_CS);
   pinmap_pinout(digitalPinToPinName(TFT_RS_PIN), PinMap_FSMC_RS);

Marlin/src/HAL/STM32/tft/xpt2046.cpp

@@ -155,9 +155,9 @@ uint16_t XPT2046::getRawData(const XPTCoordinate coordinate) {
 
 uint16_t XPT2046::HardwareIO(uint16_t data) {
   __HAL_SPI_ENABLE(&SPIx);
-  while((SPIx.Instance->SR & SPI_FLAG_TXE) != SPI_FLAG_TXE) {}
+  while ((SPIx.Instance->SR & SPI_FLAG_TXE) != SPI_FLAG_TXE) {}
   SPIx.Instance->DR = data;
-  while((SPIx.Instance->SR & SPI_FLAG_RXNE) != SPI_FLAG_RXNE) {}
+  while ((SPIx.Instance->SR & SPI_FLAG_RXNE) != SPI_FLAG_RXNE) {}
   __HAL_SPI_DISABLE(&SPIx);
 
   return SPIx.Instance->DR;

Marlin/src/HAL/STM32/timers.cpp

@@ -110,7 +110,6 @@
 // ------------------------
 
 HardwareTimer *timer_instance[NUM_HARDWARE_TIMERS] = { NULL };
-bool timer_enabled[NUM_HARDWARE_TIMERS] = { false };
 
 // ------------------------
 // Public functions
@@ -135,6 +134,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
          * which changes the prescaler when an IRQ frequency change is needed
          * (for example when steppers are turned on)
          */
+
         timer_instance[timer_num]->setPrescaleFactor(STEPPER_TIMER_PRESCALE); //the -1 is done internally
         timer_instance[timer_num]->setOverflow(_MIN(hal_timer_t(HAL_TIMER_TYPE_MAX), (HAL_TIMER_RATE) / (STEPPER_TIMER_PRESCALE) /* /frequency */), TICK_FORMAT);
         break;
@@ -145,15 +145,13 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
         break;
     }
 
+    // Disable preload. Leaving it default-enabled can cause the timer to stop if it happens
+    // to exit the ISR after the start time for the next interrupt has already passed.
+    timer_instance[timer_num]->setPreloadEnable(false);
+
     HAL_timer_enable_interrupt(timer_num);
 
-    /*
+    // Start the timer.
-     * Initializes (and unfortunately starts) the timer.
-     * This is needed to set correct IRQ priority at the moment but causes
-     * no harm since every call to HAL_timer_start() is actually followed by
-     * a call to HAL_timer_enable_interrupt() which means that there isn't
-     * a case in which you want the timer to run without a callback.
-     */
     timer_instance[timer_num]->resume(); // First call to resume() MUST follow the attachInterrupt()
 
     // This is fixed in Arduino_Core_STM32 1.8.
@@ -161,47 +159,34 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
     // timer_instance[timer_num]->setInterruptPriority
     switch (timer_num) {
       case STEP_TIMER_NUM:
-        HAL_NVIC_SetPriority(STEP_TIMER_IRQ_NAME, STEP_TIMER_IRQ_PRIO, 0);
+        timer_instance[timer_num]->setInterruptPriority(STEP_TIMER_IRQ_PRIO, 0);
         break;
       case TEMP_TIMER_NUM:
-        HAL_NVIC_SetPriority(TEMP_TIMER_IRQ_NAME, TEMP_TIMER_IRQ_PRIO, 0);
+        timer_instance[timer_num]->setInterruptPriority(TEMP_TIMER_IRQ_PRIO, 0);
         break;
     }
   }
 }
 
 void HAL_timer_enable_interrupt(const uint8_t timer_num) {
-  if (HAL_timer_initialized(timer_num) && !timer_enabled[timer_num]) {
+  if (HAL_timer_initialized(timer_num) && !timer_instance[timer_num]->hasInterrupt()) {
-    timer_enabled[timer_num] = true;
     switch (timer_num) {
       case STEP_TIMER_NUM:
-      timer_instance[timer_num]->attachInterrupt(Step_Handler);
+        timer_instance[timer_num]->attachInterrupt(Step_Handler);
-      break;
+        break;
-    case TEMP_TIMER_NUM:
+      case TEMP_TIMER_NUM:
-      timer_instance[timer_num]->attachInterrupt(Temp_Handler);
+        timer_instance[timer_num]->attachInterrupt(Temp_Handler);
-      break;
+        break;
     }
   }
 }
 
 void HAL_timer_disable_interrupt(const uint8_t timer_num) {
-  if (HAL_timer_interrupt_enabled(timer_num)) {
+  if (HAL_timer_initialized(timer_num)) timer_instance[timer_num]->detachInterrupt();
-    timer_instance[timer_num]->detachInterrupt();
-    timer_enabled[timer_num] = false;
-  }
 }
 
 bool HAL_timer_interrupt_enabled(const uint8_t timer_num) {
-  return HAL_timer_initialized(timer_num) && timer_enabled[timer_num];
+  return HAL_timer_initialized(timer_num) && timer_instance[timer_num]->hasInterrupt();
-}
-
-// Only for use within the HAL
-TIM_TypeDef * HAL_timer_device(const uint8_t timer_num) {
-  switch (timer_num) {
-    case STEP_TIMER_NUM: return STEP_TIMER_DEV;
-    case TEMP_TIMER_NUM: return TEMP_TIMER_DEV;
-  }
-  return nullptr;
 }
 
 void SetTimerInterruptPriorities() {
@@ -209,4 +194,87 @@ void SetTimerInterruptPriorities() {
   TERN_(HAS_SERVOS, libServo::setInterruptPriority(SERVO_TIMER_IRQ_PRIO, 0));
 }
 
+// This is a terrible hack to replicate the behavior used in the framework's SoftwareSerial.cpp
+// to choose a serial timer. It will select TIM7 on most boards used by Marlin, but this is more
+// resiliant to new MCUs which may not have a TIM7. Best practice is to explicitly specify
+// TIMER_SERIAL to avoid relying on framework selections which may not be predictable.
+#if !defined(TIMER_SERIAL)
+  #if defined (TIM18_BASE)
+    #define TIMER_SERIAL TIM18
+  #elif defined (TIM7_BASE)
+    #define TIMER_SERIAL TIM7
+  #elif defined (TIM6_BASE)
+    #define TIMER_SERIAL TIM6
+  #elif defined (TIM22_BASE)
+    #define TIMER_SERIAL TIM22
+  #elif defined (TIM21_BASE)
+    #define TIMER_SERIAL TIM21
+  #elif defined (TIM17_BASE)
+    #define TIMER_SERIAL TIM17
+  #elif defined (TIM16_BASE)
+    #define TIMER_SERIAL TIM16
+  #elif defined (TIM15_BASE)
+    #define TIMER_SERIAL TIM15
+  #elif defined (TIM14_BASE)
+    #define TIMER_SERIAL TIM14
+  #elif defined (TIM13_BASE)
+    #define TIMER_SERIAL TIM13
+  #elif defined (TIM11_BASE)
+    #define TIMER_SERIAL TIM11
+  #elif defined (TIM10_BASE)
+    #define TIMER_SERIAL TIM10
+  #elif defined (TIM12_BASE)
+    #define TIMER_SERIAL TIM12
+  #elif defined (TIM19_BASE)
+    #define TIMER_SERIAL TIM19
+  #elif defined (TIM9_BASE)
+    #define TIMER_SERIAL TIM9
+  #elif defined (TIM5_BASE)
+    #define TIMER_SERIAL TIM5
+  #elif defined (TIM4_BASE)
+    #define TIMER_SERIAL TIM4
+  #elif defined (TIM3_BASE)
+    #define TIMER_SERIAL TIM3
+  #elif defined (TIM2_BASE)
+    #define TIMER_SERIAL TIM2
+  #elif defined (TIM20_BASE)
+    #define TIMER_SERIAL TIM20
+  #elif defined (TIM8_BASE)
+    #define TIMER_SERIAL TIM8
+  #elif defined (TIM1_BASE)
+    #define TIMER_SERIAL TIM1
+  #else
+    #error No suitable timer found for SoftwareSerial, define TIMER_SERIAL in variant.h
+  #endif
+#endif
+
+// Place all timers used into an array, then recursively check for duplicates during compilation.
+// This does not currently account for timers used for PWM, such as for fans.
+// Timers are actually pointers. Convert to integers to simplify constexpr logic.
+static constexpr uintptr_t timers_in_use[] = {
+  uintptr_t(TEMP_TIMER_DEV),  // Override in pins file
+  uintptr_t(STEP_TIMER_DEV),  // Override in pins file
+  #if HAS_TMC_SW_SERIAL
+    uintptr_t(TIMER_SERIAL),  // Set in variant.h, or as a define in platformio.h if not present in variant.h
+  #endif
+  #if ENABLED(SPEAKER)
+    uintptr_t(TIMER_TONE),    // Set in variant.h, or as a define in platformio.h if not present in variant.h
+  #endif
+  #if HAS_SERVOS
+    uintptr_t(TIMER_SERVO),   // Set in variant.h, or as a define in platformio.h if not present in variant.h
+  #endif
+  };
+
+static constexpr bool verify_no_duplicate_timers() {
+  LOOP_L_N(i, COUNT(timers_in_use))
+    LOOP_S_L_N(j, i + 1, COUNT(timers_in_use))
+      if (timers_in_use[i] == timers_in_use[j]) return false;
+  return true;
+}
+
+// If this assertion fails at compile time, review the timers_in_use array. If default_envs is
+// defined properly in platformio.ini, VS Code can evaluate the array when hovering over it,
+// making it easy to identify the conflicting timers.
+static_assert(verify_no_duplicate_timers(), "One or more timer conflict detected");
+
 #endif // ARDUINO_ARCH_STM32 && !STM32GENERIC

Marlin/src/HAL/STM32/timers.h

@@ -30,8 +30,18 @@
 
 #define FORCE_INLINE __attribute__((always_inline)) inline
 
+// STM32 timers may be 16 or 32 bit. Limiting HAL_TIMER_TYPE_MAX to 16 bits
+// avoids issues with STM32F0 MCUs, which seem to pause timers if UINT32_MAX
+// is written to the register. STM32F4 timers do not manifest this issue,
+// even when writing to 16 bit timers.
+//
+// The range of the timer can be queried at runtime using IS_TIM_32B_COUNTER_INSTANCE.
+// This is a more expensive check than a simple compile-time constant, so its
+// implementation is deferred until the desire for a 32-bit range outweighs the cost
+// of adding a run-time check and HAL_TIMER_TYPE_MAX is refactored to allow unique
+// values for each timer.
 #define hal_timer_t uint32_t
-#define HAL_TIMER_TYPE_MAX 0xFFFFFFFF // Timers can be 16 or 32 bit
+#define HAL_TIMER_TYPE_MAX UINT16_MAX
 
 #ifndef STEP_TIMER_NUM
   #define STEP_TIMER_NUM        0  // Timer Index for Stepper
@@ -61,14 +71,14 @@
 #define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM)
 #define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM)
 
-extern void Step_Handler(HardwareTimer *htim);
+extern void Step_Handler();
-extern void Temp_Handler(HardwareTimer *htim);
+extern void Temp_Handler();
 
 #ifndef HAL_STEP_TIMER_ISR
-  #define HAL_STEP_TIMER_ISR() void Step_Handler(HardwareTimer *htim)
+  #define HAL_STEP_TIMER_ISR() void Step_Handler()
 #endif
 #ifndef HAL_TEMP_TIMER_ISR
-  #define HAL_TEMP_TIMER_ISR() void Temp_Handler(HardwareTimer *htim)
+  #define HAL_TEMP_TIMER_ISR() void Temp_Handler()
 #endif
 
 // ------------------------
@@ -90,8 +100,6 @@ bool HAL_timer_interrupt_enabled(const uint8_t timer_num);
 // Exposed here to allow all timer priority information to reside in timers.cpp
 void SetTimerInterruptPriorities();
 
-//TIM_TypeDef* HAL_timer_device(const uint8_t timer_num); no need to be public for now. not public = not used externally
-
 // FORCE_INLINE because these are used in performance-critical situations
 FORCE_INLINE bool HAL_timer_initialized(const uint8_t timer_num) {
   return timer_instance[timer_num] != NULL;

Marlin/src/HAL/STM32F1/HAL.h

@@ -46,12 +46,14 @@
   #include "msc_sd.h"
 #endif
 
+#include "MarlinSerial.h"
+
 // ------------------------
 // Defines
 // ------------------------
 
 #ifndef STM32_FLASH_SIZE
-  #if defined(MCU_STM32F103RE) || defined(MCU_STM32F103VE)
+  #if EITHER(MCU_STM32F103RE, MCU_STM32F103VE)
     #define STM32_FLASH_SIZE 512
   #else
     #define STM32_FLASH_SIZE 256
@@ -64,86 +66,50 @@
   #else
     #define UsbSerial MarlinCompositeSerial
   #endif
-  #define MSerial1  Serial1
-  #define MSerial2  Serial2
-  #define MSerial3  Serial3
-  #define MSerial4  Serial4
-  #define MSerial5  Serial5
-#else
-  #define MSerial1  Serial
-  #define MSerial2  Serial1
-  #define MSerial3  Serial2
-  #define MSerial4  Serial3
-  #define MSerial5  Serial4
 #endif
 
-#if SERIAL_PORT == 0
+#define _MSERIAL(X) MSerial##X
-  #error "SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration."
+#define MSERIAL(X) _MSERIAL(X)
-#elif SERIAL_PORT == -1
+
-  #define MYSERIAL0 UsbSerial
+#if EITHER(STM32_HIGH_DENSITY, STM32_XL_DENSITY)
-#elif SERIAL_PORT == 1
+  #define NUM_UARTS 5
-  #define MYSERIAL0 MSerial1
-#elif SERIAL_PORT == 2
-  #define MYSERIAL0 MSerial2
-#elif SERIAL_PORT == 3
-  #define MYSERIAL0 MSerial3
-#elif SERIAL_PORT == 4
-  #define MYSERIAL0 MSerial4
-#elif SERIAL_PORT == 5
-  #define MYSERIAL0 MSerial5
 #else
-  #error "SERIAL_PORT must be from -1 to 5. Please update your configuration."
+  #define NUM_UARTS 3
+#endif
+
+#if SERIAL_PORT == -1
+  #define MYSERIAL0 UsbSerial
+#elif WITHIN(SERIAL_PORT, 1, NUM_UARTS)
+  #define MYSERIAL0 MSERIAL(SERIAL_PORT)
+#elif NUM_UARTS == 5
+  #error "SERIAL_PORT must be -1 or from 1 to 5. Please update your configuration."
+#else
+  #error "SERIAL_PORT must be -1 or from 1 to 3. Please update your configuration."
 #endif
 
 #ifdef SERIAL_PORT_2
-  #if SERIAL_PORT_2 == 0
+  #if SERIAL_PORT_2 == -1
-    #error "SERIAL_PORT_2 cannot be 0. (Port 0 does not exist.) Please update your configuration."
-  #elif SERIAL_PORT_2 == SERIAL_PORT
-    #error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
-  #elif SERIAL_PORT_2 == -1
     #define MYSERIAL1 UsbSerial
-  #elif SERIAL_PORT_2 == 1
+  #elif WITHIN(SERIAL_PORT_2, 1, NUM_UARTS)
-    #define MYSERIAL1 MSerial1
+    #define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
-  #elif SERIAL_PORT_2 == 2
+  #elif NUM_UARTS == 5
-    #define MYSERIAL1 MSerial2
+    #error "SERIAL_PORT_2 must be -1 or from 1 to 5. Please update your configuration."
-  #elif SERIAL_PORT_2 == 3
-    #define MYSERIAL1 MSerial3
-  #elif SERIAL_PORT_2 == 4
-    #define MYSERIAL1 MSerial4
-  #elif SERIAL_PORT_2 == 5
-    #define MYSERIAL1 MSerial5
   #else
-    #error "SERIAL_PORT_2 must be from -1 to 5. Please update your configuration."
+    #error "SERIAL_PORT_2 must be -1 or from 1 to 3. Please update your configuration."
-  #endif
-  #define NUM_SERIAL 2
-#else
-  #define NUM_SERIAL 1
-#endif
-
-#ifdef DGUS_SERIAL
-  #if DGUS_SERIAL_PORT == 0
-    #error "DGUS_SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration."
-  #elif DGUS_SERIAL_PORT == SERIAL_PORT
-    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
-  #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
-    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
-  #elif DGUS_SERIAL_PORT == -1
-    #define DGUS_SERIAL UsbSerial
-  #elif DGUS_SERIAL_PORT == 1
-    #define DGUS_SERIAL MSerial1
-  #elif DGUS_SERIAL_PORT == 2
-    #define DGUS_SERIAL MSerial2
-  #elif DGUS_SERIAL_PORT == 3
-    #define DGUS_SERIAL MSerial3
-  #elif DGUS_SERIAL_PORT == 4
-    #define DGUS_SERIAL MSerial4
-  #elif DGUS_SERIAL_PORT == 5
-    #define DGUS_SERIAL MSerial5
-  #else
-    #error "DGUS_SERIAL_PORT must be from -1 to 5. Please update your configuration."
   #endif
 #endif
 
+#ifdef LCD_SERIAL_PORT
+  #if LCD_SERIAL_PORT == -1
+    #define LCD_SERIAL UsbSerial
+  #elif WITHIN(LCD_SERIAL_PORT, 1, NUM_UARTS)
+    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
+  #elif NUM_UARTS == 5
+    #error "LCD_SERIAL_PORT must be -1 or from 1 to 5. Please update your configuration."
+  #else
+    #error "LCD_SERIAL_PORT must be -1 or from 1 to 3. Please update your configuration."
+  #endif
+#endif
 
 // Set interrupt grouping for this MCU
 void HAL_init();

Marlin/src/HAL/STM32F1/MarlinSerial.cpp

@@ -0,0 +1,193 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifdef __STM32F1__
+
+#include "../../inc/MarlinConfig.h"
+#include "MarlinSerial.h"
+#include <libmaple/usart.h>
+
+// Copied from ~/.platformio/packages/framework-arduinoststm32-maple/STM32F1/system/libmaple/usart_private.h
+// Changed to handle Emergency Parser
+static inline __always_inline void my_usart_irq(ring_buffer *rb, ring_buffer *wb, usart_reg_map *regs, MarlinSerial &serial) {
+ /* Handle RXNEIE and TXEIE interrupts.
+  * RXNE signifies availability of a byte in DR.
+  *
+  * See table 198 (sec 27.4, p809) in STM document RM0008 rev 15.
+  * We enable RXNEIE.
+  */
+  uint32_t srflags = regs->SR, cr1its = regs->CR1;
+
+  if ((cr1its & USART_CR1_RXNEIE) && (srflags & USART_SR_RXNE)) {
+    if (srflags & USART_SR_FE || srflags & USART_SR_PE ) {
+      // framing error or parity error
+      regs->DR; // Read and throw away the data, which also clears FE and PE
+    }
+    else {
+      uint8_t c = (uint8)regs->DR;
+      #ifdef USART_SAFE_INSERT
+        // If the buffer is full and the user defines USART_SAFE_INSERT,
+        // ignore new bytes.
+        rb_safe_insert(rb, c);
+      #else
+        // By default, push bytes around in the ring buffer.
+        rb_push_insert(rb, c);
+      #endif
+      #if ENABLED(EMERGENCY_PARSER)
+        if (serial.emergency_parser_enabled())
+          emergency_parser.update(serial.emergency_state, c);
+      #endif
+    }
+  }
+  else if (srflags & USART_SR_ORE) {
+    // overrun and empty data, just do a dummy read to clear ORE
+    // and prevent a raise condition where a continous interrupt stream (due to ORE set) occurs
+    // (see chapter "Overrun error" ) in STM32 reference manual
+    regs->DR;
+  }
+
+  // TXE signifies readiness to send a byte to DR.
+  if ((cr1its & USART_CR1_TXEIE) && (srflags & USART_SR_TXE)) {
+    if (!rb_is_empty(wb))
+      regs->DR=rb_remove(wb);
+    else
+      regs->CR1 &= ~((uint32)USART_CR1_TXEIE); // disable TXEIE
+  }
+}
+
+// Not every MarlinSerial port should handle emergency parsing.
+// It would not make sense to parse GCode from TMC responses, for example.
+constexpr bool serial_handles_emergency(int port) {
+  return false
+    #ifdef SERIAL_PORT
+      || (SERIAL_PORT) == port
+    #endif
+    #ifdef SERIAL_PORT_2
+      || (SERIAL_PORT_2) == port
+    #endif
+    #ifdef LCD_SERIAL_PORT
+      || (LCD_SERIAL_PORT) == port
+    #endif
+  ;
+}
+
+#define DEFINE_HWSERIAL_MARLIN(name, n)   \
+  MarlinSerial name(USART##n,             \
+            BOARD_USART##n##_TX_PIN,      \
+            BOARD_USART##n##_RX_PIN,      \
+            serial_handles_emergency(n)); \
+  extern "C" void __irq_usart##n(void) {  \
+    my_usart_irq(USART##n->rb, USART##n->wb, USART##n##_BASE, MSerial##n); \
+  }
+
+#define DEFINE_HWSERIAL_UART_MARLIN(name, n) \
+  MarlinSerial name(UART##n,                 \
+          BOARD_USART##n##_TX_PIN,           \
+          BOARD_USART##n##_RX_PIN,           \
+          serial_handles_emergency(n));      \
+  extern "C" void __irq_usart##n(void) {     \
+    my_usart_irq(UART##n->rb, UART##n->wb, UART##n##_BASE, MSerial##n); \
+  }
+
+// Instantiate all UARTs even if they are not needed
+// This avoids a bunch of logic to figure out every serial
+// port which may be in use on the system.
+DEFINE_HWSERIAL_MARLIN(MSerial1, 1);
+DEFINE_HWSERIAL_MARLIN(MSerial2, 2);
+DEFINE_HWSERIAL_MARLIN(MSerial3, 3);
+#if EITHER(STM32_HIGH_DENSITY, STM32_XL_DENSITY)
+  DEFINE_HWSERIAL_UART_MARLIN(MSerial4, 4);
+  DEFINE_HWSERIAL_UART_MARLIN(MSerial5, 5);
+#endif
+
+// Check the type of each serial port by passing it to a template function.
+// HardwareSerial is known to sometimes hang the controller when an error occurs,
+// so this case will fail the static assert. All other classes are assumed to be ok.
+template <typename T>
+constexpr bool IsSerialClassAllowed(const T&) { return true; }
+constexpr bool IsSerialClassAllowed(const HardwareSerial&) { return false; }
+
+#define CHECK_CFG_SERIAL(A) static_assert(IsSerialClassAllowed(A), STRINGIFY(A) " is defined incorrectly");
+#define CHECK_AXIS_SERIAL(A) static_assert(IsSerialClassAllowed(A##_HARDWARE_SERIAL), STRINGIFY(A) "_HARDWARE_SERIAL must be defined in the form MSerial1, rather than Serial1");
+
+// If you encounter this error, replace SerialX with MSerialX, for example MSerial3.
+
+// Non-TMC ports were already validated in HAL.h, so do not require verbose error messages.
+#ifdef MYSERIAL0
+  CHECK_CFG_SERIAL(MYSERIAL0);
+#endif
+#ifdef MYSERIAL1
+  CHECK_CFG_SERIAL(MYSERIAL1);
+#endif
+#ifdef LCD_SERIAL
+  CHECK_CFG_SERIAL(LCD_SERIAL);
+#endif
+#if AXIS_HAS_HW_SERIAL(X)
+  CHECK_AXIS_SERIAL(X);
+#endif
+#if AXIS_HAS_HW_SERIAL(X2)
+  CHECK_AXIS_SERIAL(X2);
+#endif
+#if AXIS_HAS_HW_SERIAL(Y)
+  CHECK_AXIS_SERIAL(Y);
+#endif
+#if AXIS_HAS_HW_SERIAL(Y2)
+  CHECK_AXIS_SERIAL(Y2);
+#endif
+#if AXIS_HAS_HW_SERIAL(Z)
+  CHECK_AXIS_SERIAL(Z);
+#endif
+#if AXIS_HAS_HW_SERIAL(Z2)
+  CHECK_AXIS_SERIAL(Z2);
+#endif
+#if AXIS_HAS_HW_SERIAL(Z3)
+  CHECK_AXIS_SERIAL(Z3);
+#endif
+#if AXIS_HAS_HW_SERIAL(Z4)
+  CHECK_AXIS_SERIAL(Z4);
+#endif
+#if AXIS_HAS_HW_SERIAL(E0)
+  CHECK_AXIS_SERIAL(E0);
+#endif
+#if AXIS_HAS_HW_SERIAL(E1)
+  CHECK_AXIS_SERIAL(E1);
+#endif
+#if AXIS_HAS_HW_SERIAL(E2)
+  CHECK_AXIS_SERIAL(E2);
+#endif
+#if AXIS_HAS_HW_SERIAL(E3)
+  CHECK_AXIS_SERIAL(E3);
+#endif
+#if AXIS_HAS_HW_SERIAL(E4)
+  CHECK_AXIS_SERIAL(E4);
+#endif
+#if AXIS_HAS_HW_SERIAL(E5)
+  CHECK_AXIS_SERIAL(E5);
+#endif
+#if AXIS_HAS_HW_SERIAL(E6)
+  CHECK_AXIS_SERIAL(E6);
+#endif
+#if AXIS_HAS_HW_SERIAL(E7)
+  CHECK_AXIS_SERIAL(E7);
+#endif
+
+#endif // __STM32F1__

Marlin/src/HAL/STM32F1/MarlinSerial.h

@@ -0,0 +1,71 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <HardwareSerial.h>
+#include <libmaple/usart.h>
+#include <WString.h>
+
+#include "../../inc/MarlinConfigPre.h"
+#if ENABLED(EMERGENCY_PARSER)
+  #include "../../feature/e_parser.h"
+#endif
+
+// Increase priority of serial interrupts, to reduce overflow errors
+#define UART_IRQ_PRIO 1
+
+class MarlinSerial : public HardwareSerial {
+public:
+  #if ENABLED(EMERGENCY_PARSER)
+    const bool ep_enabled;
+    EmergencyParser::State emergency_state;
+    inline bool emergency_parser_enabled() { return ep_enabled; }
+  #endif
+
+  MarlinSerial(struct usart_dev *usart_device, uint8 tx_pin, uint8 rx_pin, bool TERN_(EMERGENCY_PARSER, ep_capable)) :
+    HardwareSerial(usart_device, tx_pin, rx_pin)
+    #if ENABLED(EMERGENCY_PARSER)
+      , ep_enabled(ep_capable)
+      , emergency_state(EmergencyParser::State::EP_RESET)
+    #endif
+    { }
+
+  #ifdef UART_IRQ_PRIO
+    // Shadow the parent methods to set IRQ priority after begin()
+    void begin(uint32 baud) {
+      MarlinSerial::begin(baud, SERIAL_8N1);
+    }
+
+    void begin(uint32 baud, uint8_t config) {
+      HardwareSerial::begin(baud, config);
+      nvic_irq_set_priority(c_dev()->irq_num, UART_IRQ_PRIO);
+    }
+  #endif
+};
+
+extern MarlinSerial MSerial1;
+extern MarlinSerial MSerial2;
+extern MarlinSerial MSerial3;
+#if EITHER(STM32_HIGH_DENSITY, STM32_XL_DENSITY)
+  extern MarlinSerial MSerial4;
+  extern MarlinSerial MSerial5;
+#endif

Marlin/src/HAL/STM32F1/SPI.cpp

@@ -40,6 +40,9 @@
 #include <boards.h>
 #include <wirish.h>
 
+#include "../../inc/MarlinConfig.h"
+#include "spi_pins.h"
+
 /** Time in ms for DMA receive timeout */
 #define DMA_TIMEOUT 100
 
@@ -710,6 +713,6 @@ static spi_baud_rate determine_baud_rate(spi_dev *dev, uint32_t freq) {
   return baud_rates[i];
 }
 
-SPIClass SPI(1);
+SPIClass SPI(SPI_DEVICE);
 
 #endif // __STM32F1__

Marlin/src/HAL/STM32F1/SoftwareSerial.cpp

@@ -57,4 +57,4 @@ void SoftwareSerial::stopListening() {
   listening = false;
 }
 
-#endif //__STM32F1__
+#endif // __STM32F1__

Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp

@@ -20,7 +20,7 @@
 
 #include "../../../inc/MarlinConfig.h"
 
-#if BOTH(HAS_GRAPHICAL_LCD, FORCE_SOFT_SPI)
+#if BOTH(HAS_MARLINUI_U8GLIB, FORCE_SOFT_SPI)
 
 #include "../HAL.h"
 #include <U8glib.h>
@@ -161,5 +161,5 @@ uint8_t u8g_com_HAL_STM32F1_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
   return 1;
 }
 
-#endif // HAS_GRAPHICAL_LCD
+#endif // HAS_MARLINUI_U8GLIB
 #endif // STM32F1

Marlin/src/HAL/STM32F1/inc/SanityCheck.h

@@ -25,10 +25,6 @@
  * Test STM32F1-specific configuration values for errors at compile-time.
  */
 
-#if ENABLED(EMERGENCY_PARSER)
-  #error "EMERGENCY_PARSER is not yet implemented for STM32F1. Disable EMERGENCY_PARSER to continue."
-#endif
-
 #if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
   #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on STM32F1."
 #endif

Marlin/src/HAL/STM32F1/msc_sd.cpp

@@ -21,7 +21,7 @@
 #define PRODUCT_ID 0x29
 
 USBMassStorage MarlinMSC;
-USBCompositeSerial MarlinCompositeSerial;
+MarlinUSBCompositeSerial MarlinCompositeSerial;
 
 #include "../../inc/MarlinConfig.h"
 
@@ -38,6 +38,17 @@ USBCompositeSerial MarlinCompositeSerial;
 
 #endif
 
+#if ENABLED(EMERGENCY_PARSER)
+  void (*real_rx_callback)(void);
+
+  void my_rx_callback(void) {
+    real_rx_callback();
+    int len = MarlinCompositeSerial.available();
+    while (len-- > 0) // >0 because available() may return a negative value
+      emergency_parser.update(MarlinCompositeSerial.emergency_state, MarlinCompositeSerial.peek());
+  }
+#endif
+
 void MSC_SD_init() {
   USBComposite.setProductId(PRODUCT_ID);
   // Just set MarlinCompositeSerial enabled to true
@@ -59,6 +70,11 @@ void MSC_SD_init() {
   // Register composite Serial
   MarlinCompositeSerial.registerComponent();
   USBComposite.begin();
+  #if ENABLED(EMERGENCY_PARSER)
+    //rx is usbSerialPart.endpoints[2]
+    real_rx_callback = usbSerialPart.endpoints[2].callback;
+    usbSerialPart.endpoints[2].callback = my_rx_callback;
+  #endif
 }
 
 #endif // USE_USB_COMPOSITE

Marlin/src/HAL/STM32F1/msc_sd.h

@@ -17,7 +17,26 @@
 
 #include <USBComposite.h>
 
+#include "../../inc/MarlinConfigPre.h"
+#if ENABLED(EMERGENCY_PARSER)
+  #include "../../feature/e_parser.h"
+#endif
+
+class MarlinUSBCompositeSerial : public USBCompositeSerial {
+public:
+  MarlinUSBCompositeSerial() : USBCompositeSerial()
+    #if ENABLED(EMERGENCY_PARSER)
+      , emergency_state(EmergencyParser::State::EP_RESET)
+    #endif
+    { }
+
+  #if ENABLED(EMERGENCY_PARSER)
+    EmergencyParser::State emergency_state;
+    inline bool emergency_parser_enabled() { return true; }
+  #endif
+};
+
 extern USBMassStorage MarlinMSC;
-extern USBCompositeSerial MarlinCompositeSerial;
+extern MarlinUSBCompositeSerial MarlinCompositeSerial;
 
 void MSC_SD_init();

Marlin/src/HAL/STM32F1/onboard_sd.cpp

@@ -9,7 +9,6 @@
  * No restriction on use. You can use, modify and redistribute it for
  * personal, non-profit or commercial products UNDER YOUR RESPONSIBILITY.
  * Redistributions of source code must retain the above copyright notice.
- *
  */
 
 #include "../../inc/MarlinConfig.h"
@@ -21,23 +20,23 @@
 #include "fastio.h"
 
 #if HAS_SHARED_MEDIA
-  #ifndef ON_BOARD_SPI_DEVICE
+  #ifndef ONBOARD_SPI_DEVICE
-    #define ON_BOARD_SPI_DEVICE SPI_DEVICE
+    #define ONBOARD_SPI_DEVICE SPI_DEVICE
   #endif
   #define ONBOARD_SD_SPI SPI
 #else
-  SPIClass OnBoardSPI(ON_BOARD_SPI_DEVICE);
+  SPIClass OnboardSPI(ONBOARD_SPI_DEVICE);
-  #define ONBOARD_SD_SPI OnBoardSPI
+  #define ONBOARD_SD_SPI OnboardSPI
 #endif
 
-#if ON_BOARD_SPI_DEVICE == 1
+#if ONBOARD_SPI_DEVICE == 1
   #define SPI_CLOCK_MAX SPI_BAUD_PCLK_DIV_4
 #else
   #define SPI_CLOCK_MAX SPI_BAUD_PCLK_DIV_2
 #endif
 
-#define CS_LOW()  WRITE(ONBOARD_SD_CS_PIN, LOW)  /* Set OnBoardSPI cs low */
+#define CS_LOW()  WRITE(ONBOARD_SD_CS_PIN, LOW)  /* Set OnboardSPI cs low */
-#define CS_HIGH() WRITE(ONBOARD_SD_CS_PIN, HIGH) /* Set OnBoardSPI cs high */
+#define CS_HIGH() WRITE(ONBOARD_SD_CS_PIN, HIGH) /* Set OnboardSPI cs high */
 
 #define FCLK_FAST() ONBOARD_SD_SPI.setClockDivider(SPI_CLOCK_MAX)
 #define FCLK_SLOW() ONBOARD_SD_SPI.setClockDivider(SPI_BAUD_PCLK_DIV_256)
@@ -152,7 +151,7 @@ static int select() { /* 1:OK, 0:Timeout */
 /*-----------------------------------------------------------------------*/
 
 static void power_on() {  /* Enable SSP module and attach it to I/O pads */
-  ONBOARD_SD_SPI.setModule(ON_BOARD_SPI_DEVICE);
+  ONBOARD_SD_SPI.setModule(ONBOARD_SPI_DEVICE);
   ONBOARD_SD_SPI.begin();
   ONBOARD_SD_SPI.setBitOrder(MSBFIRST);
   ONBOARD_SD_SPI.setDataMode(SPI_MODE0);

Marlin/src/HAL/STM32F1/sdio.cpp

@@ -26,7 +26,7 @@
 
 #include "../../inc/MarlinConfig.h" // Allow pins/pins.h to set density
 
-#if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY)
+#if EITHER(STM32_HIGH_DENSITY, STM32_XL_DENSITY)
 
 #include "sdio.h"
 
@@ -108,7 +108,7 @@ bool SDIO_ReadBlock_DMA(uint32_t blockAddress, uint8_t *data) {
     SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS | SDIO_ICR_DATA_FLAGS);
     dma_disable(SDIO_DMA_DEV, SDIO_DMA_CHANNEL);
     return false;
-	}
+  }
 
   //Wait for DMA transaction to complete
   while ((DMA2_BASE->ISR & (DMA_ISR_TEIF4|DMA_ISR_TCIF4)) == 0 ) { /* wait */ }

Marlin/src/HAL/STM32F1/tft/tft_fsmc.cpp

@@ -89,6 +89,16 @@ void TFT_FSMC::Init() {
   uint8_t cs = FSMC_CS_PIN, rs = FSMC_RS_PIN;
   uint32_t controllerAddress;
 
+  #if PIN_EXISTS(TFT_BACKLIGHT)
+    OUT_WRITE(TFT_BACKLIGHT_PIN, DISABLED(DELAYED_BACKLIGHT_INIT));
+  #endif
+
+  #if ENABLED(LCD_USE_DMA_FSMC)
+    dma_init(FSMC_DMA_DEV);
+    dma_disable(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
+    dma_set_priority(FSMC_DMA_DEV, FSMC_DMA_CHANNEL, DMA_PRIORITY_MEDIUM);
+  #endif
+
   #if PIN_EXISTS(TFT_RESET)
     OUT_WRITE(TFT_RESET_PIN, HIGH);
     delay(100);
@@ -201,6 +211,8 @@ uint32_t TFT_FSMC::GetID() {
     id = ReadID(LCD_READ_ID);
   if ((id & 0xFFFF) == 0 || (id & 0xFFFF) == 0xFFFF)
     id = ReadID(LCD_READ_ID4);
+  if ((id & 0xFF00) == 0 && (id & 0xFF) != 0)
+    id = ReadID(LCD_READ_ID4);
   return id;
 }
 

Marlin/src/HAL/STM32_F4_F7/HAL.h

@@ -46,24 +46,16 @@
 // Serial override
 //extern HalSerial usb_serial;
 
+#define _MSERIAL(X) SerialUART##X
+#define MSERIAL(X) _MSERIAL(X)
+#define SerialUART0 Serial1
+
 #if defined(STM32F4) && SERIAL_PORT == 0
   #error "SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration."
 #elif SERIAL_PORT == -1
   #define MYSERIAL0 SerialUSB
-#elif SERIAL_PORT == 0
+#elif WITHIN(SERIAL_PORT, 0, 6)
-  #define MYSERIAL0 Serial1
+  #define MYSERIAL0 MSERIAL(SERIAL_PORT)
-#elif SERIAL_PORT == 1
-  #define MYSERIAL0 SerialUART1
-#elif SERIAL_PORT == 2
-  #define MYSERIAL0 SerialUART2
-#elif SERIAL_PORT == 3
-  #define MYSERIAL0 SerialUART3
-#elif SERIAL_PORT == 4
-  #define MYSERIAL0 SerialUART4
-#elif SERIAL_PORT == 5
-  #define MYSERIAL0 SerialUART5
-#elif SERIAL_PORT == 6
-  #define MYSERIAL0 SerialUART6
 #else
   #error "SERIAL_PORT must be from -1 to 6. Please update your configuration."
 #endif
@@ -71,57 +63,24 @@
 #ifdef SERIAL_PORT_2
   #if defined(STM32F4) && SERIAL_PORT_2 == 0
     #error "SERIAL_PORT_2 cannot be 0. (Port 0 does not exist.) Please update your configuration."
-  #elif SERIAL_PORT_2 == SERIAL_PORT
-    #error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
   #elif SERIAL_PORT_2 == -1
     #define MYSERIAL1 SerialUSB
-  #elif SERIAL_PORT_2 == 0
+  #elif WITHIN(SERIAL_PORT_2, 0, 6)
-    #define MYSERIAL1 Serial1
+    #define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
-  #elif SERIAL_PORT_2 == 1
-    #define MYSERIAL1 SerialUART1
-  #elif SERIAL_PORT_2 == 2
-    #define MYSERIAL1 SerialUART2
-  #elif SERIAL_PORT_2 == 3
-    #define MYSERIAL1 SerialUART3
-  #elif SERIAL_PORT_2 == 4
-    #define MYSERIAL1 SerialUART4
-  #elif SERIAL_PORT_2 == 5
-    #define MYSERIAL1 SerialUART5
-  #elif SERIAL_PORT_2 == 6
-    #define MYSERIAL1 SerialUART6
   #else
     #error "SERIAL_PORT_2 must be from -1 to 6. Please update your configuration."
   #endif
-  #define NUM_SERIAL 2
-#else
-  #define NUM_SERIAL 1
 #endif
 
-#ifdef DGUS_SERIAL_PORT
+#ifdef LCD_SERIAL_PORT
-  #if defined(STM32F4) && DGUS_SERIAL_PORT == 0
+  #if defined(STM32F4) && LCD_SERIAL_PORT == 0
-    #error "DGUS_SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration."
+    #error "LCD_SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration."
-  #elif DGUS_SERIAL_PORT == SERIAL_PORT
+  #elif LCD_SERIAL_PORT == -1
-    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
+    #define LCD_SERIAL SerialUSB
-  #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
+  #elif WITHIN(LCD_SERIAL_PORT, 0, 6)
-    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
+    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
-  #elif DGUS_SERIAL_PORT == -1
-    #define DGUS_SERIAL SerialUSB
-  #elif DGUS_SERIAL_PORT == 0
-    #define DGUS_SERIAL Serial1
-  #elif DGUS_SERIAL_PORT == 1
-    #define DGUS_SERIAL SerialUART1
-  #elif DGUS_SERIAL_PORT == 2
-    #define DGUS_SERIAL SerialUART2
-  #elif DGUS_SERIAL_PORT == 3
-    #define DGUS_SERIAL SerialUART3
-  #elif DGUS_SERIAL_PORT == 4
-    #define DGUS_SERIAL SerialUART4
-  #elif DGUS_SERIAL_PORT == 5
-    #define DGUS_SERIAL SerialUART5
-  #elif DGUS_SERIAL_PORT == 6
-    #define DGUS_SERIAL SerialUART6
   #else
-    #error "DGUS_SERIAL_PORT must be from -1 to 6. Please update your configuration."
+    #error "LCD_SERIAL_PORT must be from -1 to 6. Please update your configuration."
   #endif
 #endif
 

Marlin/src/HAL/STM32_F4_F7/HAL_SPI.cpp

@@ -72,7 +72,7 @@ static SPISettings spiConfig;
  */
 void spiBegin() {
   #if !defined(SS_PIN) || SS_PIN < 0
-    #error SS_PIN not defined!
+    #error "SS_PIN not defined!"
   #endif
 
   OUT_WRITE(SS_PIN, HIGH);

Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.cpp

@@ -22,7 +22,6 @@
  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  * THE SOFTWARE.
- *
  */
 
 #if defined(STM32GENERIC) && defined(STM32F7)
@@ -662,7 +661,6 @@ boolean TMC26XStepper::isEnabled() { return !!(chopper_config_register & T_OFF_P
 /**
  * reads a value from the TMC26X status register. The value is not obtained directly but can then
  * be read by the various status routines.
- *
  */
 void TMC26XStepper::readStatus(char read_value) {
   uint32_t old_driver_configuration_register_value = driver_configuration_register_value;

Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.h

@@ -22,7 +22,6 @@
  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  * THE SOFTWARE.
- *
  */
 #pragma once
 

Marlin/src/HAL/TEENSY31_32/HAL.h

@@ -44,21 +44,19 @@
 //#undef MOTHERBOARD
 //#define MOTHERBOARD BOARD_TEENSY31_32
 
-#define IS_32BIT_TEENSY defined(__MK20DX256__)
+#ifdef __MK20DX256__
-#define IS_TEENSY32 defined(__MK20DX256__)
+  #define IS_32BIT_TEENSY 1
+  #define IS_TEENSY32 1
+#endif
 
-#define NUM_SERIAL 1
+#define _MSERIAL(X) Serial##X
+#define MSERIAL(X) _MSERIAL(X)
+#define Serial0 Serial
 
 #if SERIAL_PORT == -1
   #define MYSERIAL0 SerialUSB
-#elif SERIAL_PORT == 0
+#elif WITHIN(SERIAL_PORT, 0, 3)
-  #define MYSERIAL0 Serial
+  #define MYSERIAL0 MSERIAL(SERIAL_PORT)
-#elif SERIAL_PORT == 1
-  #define MYSERIAL0 Serial1
-#elif SERIAL_PORT == 2
-  #define MYSERIAL0 Serial2
-#elif SERIAL_PORT == 3
-  #define MYSERIAL0 Serial3
 #endif
 
 #define HAL_SERVO_LIB libServo

Marlin/src/HAL/TEENSY35_36/HAL.h

@@ -45,22 +45,23 @@
 // Defines
 // ------------------------
 
-#define IS_32BIT_TEENSY (defined(__MK64FX512__) || defined(__MK66FX1M0__))
+#ifdef __MK64FX512__
-#define IS_TEENSY35 defined(__MK64FX512__)
+  #define IS_32BIT_TEENSY 1
-#define IS_TEENSY36 defined(__MK66FX1M0__)
+  #define IS_TEENSY35 1
+#endif
+#ifdef __MK66FX1M0__
+  #define IS_32BIT_TEENSY 1
+  #define IS_TEENSY36 1
+#endif
 
-#define NUM_SERIAL 1
+#define _MSERIAL(X) Serial##X
+#define MSERIAL(X) _MSERIAL(X)
+#define Serial0 Serial
 
 #if SERIAL_PORT == -1
   #define MYSERIAL0 SerialUSB
-#elif SERIAL_PORT == 0
+#elif WITHIN(SERIAL_PORT, 0, 3)
-  #define MYSERIAL0 Serial
+  #define MYSERIAL0 MSERIAL(SERIAL_PORT)
-#elif SERIAL_PORT == 1
-  #define MYSERIAL0 Serial1
-#elif SERIAL_PORT == 2
-  #define MYSERIAL0 Serial2
-#elif SERIAL_PORT == 3
-  #define MYSERIAL0 Serial3
 #endif
 
 #define HAL_SERVO_LIB libServo

Marlin/src/HAL/TEENSY35_36/HAL_SPI.cpp

@@ -31,7 +31,7 @@ static SPISettings spiConfig;
 
 void spiBegin() {
   #if !PIN_EXISTS(SS)
-    #error SS_PIN not defined!
+    #error "SS_PIN not defined!"
   #endif
   OUT_WRITE(SS_PIN, HIGH);
   SET_OUTPUT(SCK_PIN);

Marlin/src/HAL/TEENSY35_36/timers.h

@@ -16,6 +16,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
  */
 #pragma once
 

Marlin/src/HAL/TEENSY40_41/HAL.cpp

@@ -0,0 +1,167 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Description: HAL for Teensy40 (IMXRT1062)
+ */
+
+#ifdef __IMXRT1062__
+
+#include "HAL.h"
+#include "../shared/Delay.h"
+#include "timers.h"
+
+#include <Wire.h>
+
+uint16_t HAL_adc_result, HAL_adc_select;
+
+static const uint8_t pin2sc1a[] = {
+  0x07,  // 0/A0  AD_B1_02
+  0x08,  // 1/A1  AD_B1_03
+  0x0C,  // 2/A2  AD_B1_07
+  0x0B,  // 3/A3  AD_B1_06
+  0x06,  // 4/A4  AD_B1_01
+  0x05,  // 5/A5  AD_B1_00
+  0x0F,  // 6/A6  AD_B1_10
+  0x00,  // 7/A7  AD_B1_11
+  0x0D,  // 8/A8  AD_B1_08
+  0x0E,  // 9/A9  AD_B1_09
+  0x01,  // 24/A10 AD_B0_12
+  0x02,  // 25/A11 AD_B0_13
+  0x83,  // 26/A12 AD_B1_14 - only on ADC2, 3
+  0x84,  // 27/A13 AD_B1_15 - only on ADC2, 4
+  0x07,  // 14/A0  AD_B1_02
+  0x08,  // 15/A1  AD_B1_03
+  0x0C,  // 16/A2  AD_B1_07
+  0x0B,  // 17/A3  AD_B1_06
+  0x06,  // 18/A4  AD_B1_01
+  0x05,  // 19/A5  AD_B1_00
+  0x0F,  // 20/A6  AD_B1_10
+  0x00,  // 21/A7  AD_B1_11
+  0x0D,  // 22/A8  AD_B1_08
+  0x0E,  // 23/A9  AD_B1_09
+  0x01,  // 24/A10 AD_B0_12
+  0x02,  // 25/A11 AD_B0_13
+  0x83,  // 26/A12 AD_B1_14 - only on ADC2, 3
+  0x84,  // 27/A13 AD_B1_15 - only on ADC2, 4
+  #ifdef ARDUINO_TEENSY41
+    0xFF,  // 28
+    0xFF,  // 29
+    0xFF,  // 30
+    0xFF,  // 31
+    0xFF,  // 32
+    0xFF,  // 33
+    0xFF,  // 34
+    0xFF,  // 35
+    0xFF,  // 36
+    0xFF,  // 37
+    0x81,  // 38/A14 AD_B1_12 - only on ADC2, 1
+    0x82,  // 39/A15 AD_B1_13 - only on ADC2, 2
+    0x09,  // 40/A16 AD_B1_04
+    0x0A,  // 41/A17 AD_B1_05
+  #endif
+};
+
+/*
+// disable interrupts
+void cli() { noInterrupts(); }
+
+// enable interrupts
+void sei() { interrupts(); }
+*/
+
+void HAL_adc_init() {
+  analog_init();
+  while (ADC1_GC & ADC_GC_CAL) ;
+  while (ADC2_GC & ADC_GC_CAL) ;
+}
+
+void HAL_clear_reset_source() {
+  uint32_t reset_source = SRC_SRSR;
+  SRC_SRSR = reset_source;
+ }
+
+uint8_t HAL_get_reset_source() {
+  switch (SRC_SRSR & 0xFF) {
+    case 1: return RST_POWER_ON; break;
+    case 2: return RST_SOFTWARE; break;
+    case 4: return RST_EXTERNAL; break;
+    // case 8: return RST_BROWN_OUT; break;
+    case 16: return RST_WATCHDOG; break;
+     case 64: return RST_JTAG; break;
+    // case 128: return RST_OVERTEMP; break;
+  }
+  return 0;
+}
+
+#define __bss_end _ebss
+
+extern "C" {
+  extern char __bss_end;
+  extern char __heap_start;
+  extern void* __brkval;
+
+  // Doesn't work on Teensy 4.x
+  uint32_t freeMemory() {
+    uint32_t free_memory;
+    if ((uint32_t)__brkval == 0)
+      free_memory = ((uint32_t)&free_memory) - ((uint32_t)&__bss_end);
+    else
+      free_memory = ((uint32_t)&free_memory) - ((uint32_t)__brkval);
+    return free_memory;
+  }
+}
+
+void HAL_adc_start_conversion(const uint8_t adc_pin) {
+  const uint16_t pin = pin2sc1a[adc_pin];
+  if (pin == 0xFF) {
+    HAL_adc_select = -1; // Digital only
+  }
+  else if (pin & 0x80) {
+    HAL_adc_select = 1;
+    ADC2_HC0 = pin & 0x7F;
+  }
+  else {
+    HAL_adc_select = 0;
+    ADC1_HC0 = pin;
+  }
+}
+
+uint16_t HAL_adc_get_result() {
+  switch (HAL_adc_select) {
+    case 0:
+      while (!(ADC1_HS & ADC_HS_COCO0)) ; // wait
+      return ADC1_R0;
+    case 1:
+      while (!(ADC2_HS & ADC_HS_COCO0)) ; // wait
+      return ADC2_R0;
+  }
+  return 0;
+}
+
+bool is_output(uint8_t pin) {
+  const struct digital_pin_bitband_and_config_table_struct *p;
+  p = digital_pin_to_info_PGM + pin;
+  return (*(p->reg + 1) & p->mask);
+}
+
+#endif // __IMXRT1062__

Marlin/src/HAL/TEENSY40_41/HAL.h

@@ -0,0 +1,147 @@
+/**
+ * Marlin 3D Printer Firmware
+ *
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+ * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Description: HAL for Teensy 4.0 and Teensy 4.1
+ */
+
+#define CPU_32_BIT
+
+#include "../shared/Marduino.h"
+#include "../shared/math_32bit.h"
+#include "../shared/HAL_SPI.h"
+
+#include "fastio.h"
+#include "watchdog.h"
+
+#include <stdint.h>
+#include <util/atomic.h>
+
+//#define ST7920_DELAY_1 DELAY_NS(600)
+//#define ST7920_DELAY_2 DELAY_NS(750)
+//#define ST7920_DELAY_3 DELAY_NS(750)
+
+// ------------------------
+// Defines
+// ------------------------
+
+#ifdef __IMXRT1062__
+  #define IS_32BIT_TEENSY 1
+  #define IS_TEENSY41 1
+#endif
+
+#define _MSERIAL(X) Serial##X
+#define MSERIAL(X) _MSERIAL(X)
+#define Serial0 Serial
+
+#if SERIAL_PORT == -1
+  #define MYSERIAL0 SerialUSB
+#elif WITHIN(SERIAL_PORT, 0, 8)
+  #define MYSERIAL0 MSERIAL(SERIAL_PORT)
+#else
+  #error "The required SERIAL_PORT must be from -1 to 8. Please update your configuration."
+#endif
+
+#ifdef SERIAL_PORT_2
+  #if SERIAL_PORT_2 == -1
+    #define MYSERIAL1 usbSerial
+  #elif WITHIN(SERIAL_PORT_2, 0, 8)
+    #define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
+  #else
+      #error "SERIAL_PORT_2 must be from -1 to 8. Please update your configuration."
+  #endif
+#endif
+
+#define HAL_SERVO_LIB libServo
+
+typedef int8_t pin_t;
+
+#ifndef analogInputToDigitalPin
+  #define analogInputToDigitalPin(p) ((p < 12u) ? (p) + 54u : -1)
+#endif
+
+#define CRITICAL_SECTION_START()  uint32_t primask = __get_primask(); __disable_irq()
+#define CRITICAL_SECTION_END()    if (!primask) __enable_irq()
+#define ISRS_ENABLED() (!__get_primask())
+#define ENABLE_ISRS()  __enable_irq()
+#define DISABLE_ISRS() __disable_irq()
+
+#undef sq
+#define sq(x) ((x)*(x))
+
+#ifndef strncpy_P
+  #define strncpy_P(dest, src, num) strncpy((dest), (src), (num))
+#endif
+
+// Don't place string constants in PROGMEM
+#undef PSTR
+#define PSTR(str) ({static const char *data = (str); &data[0];})
+
+// Fix bug in pgm_read_ptr
+#undef pgm_read_ptr
+#define pgm_read_ptr(addr) (*((void**)(addr)))
+// Add type-checking to pgm_read_word
+#undef pgm_read_word
+#define pgm_read_word(addr) (*((uint16_t*)(addr)))
+
+// Enable hooks into idle and setup for HAL
+#define HAL_IDLETASK 1
+FORCE_INLINE void HAL_idletask() {}
+FORCE_INLINE void HAL_init() {}
+
+// Clear reset reason
+void HAL_clear_reset_source();
+
+// Reset reason
+uint8_t HAL_get_reset_source();
+
+FORCE_INLINE void _delay_ms(const int delay_ms) { delay(delay_ms); }
+
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wunused-function"
+extern "C" {
+  uint32_t freeMemory();
+}
+#pragma GCC diagnostic pop
+
+// ADC
+
+void HAL_adc_init();
+
+#define HAL_ADC_VREF         3.3
+#define HAL_ADC_RESOLUTION  10
+#define HAL_ADC_FILTERED      // turn off ADC oversampling
+#define HAL_START_ADC(pin)  HAL_adc_start_conversion(pin)
+#define HAL_READ_ADC()      HAL_adc_get_result()
+#define HAL_ADC_READY()     true
+
+#define HAL_ANALOG_SELECT(pin)
+
+void HAL_adc_start_conversion(const uint8_t adc_pin);
+uint16_t HAL_adc_get_result();
+
+#define GET_PIN_MAP_PIN(index) index
+#define GET_PIN_MAP_INDEX(pin) pin
+#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
+
+bool is_output(uint8_t pin);

Marlin/src/HAL/TEENSY40_41/HAL_SPI.cpp

@@ -0,0 +1,138 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#ifdef __IMXRT1062__
+
+#include "HAL.h"
+#include <SPI.h>
+#include <pins_arduino.h>
+#include "spi_pins.h"
+#include "../../core/macros.h"
+
+static SPISettings spiConfig;
+
+// ------------------------
+// Public functions
+// ------------------------
+
+#if ENABLED(SOFTWARE_SPI)
+  // ------------------------
+  // Software SPI
+  // ------------------------
+  #error "Software SPI not supported for Teensy 4. Use Hardware SPI."
+#else
+
+// ------------------------
+// Hardware SPI
+// ------------------------
+
+void spiBegin() {
+  #ifndef SS_PIN
+    #error "SS_PIN is not defined!"
+  #endif
+
+  OUT_WRITE(SS_PIN, HIGH);
+
+  //SET_OUTPUT(SCK_PIN);
+  //SET_INPUT(MISO_PIN);
+  //SET_OUTPUT(MOSI_PIN);
+
+  #if 0 && DISABLED(SOFTWARE_SPI)
+    // set SS high - may be chip select for another SPI device
+    #if SET_SPI_SS_HIGH
+      WRITE(SS_PIN, HIGH);
+    #endif
+    // set a default rate
+    spiInit(SPI_HALF_SPEED); // 1
+  #endif
+}
+
+void spiInit(uint8_t spiRate) {
+  // Use Marlin data-rates
+  uint32_t clock;
+  switch (spiRate) {
+  case SPI_FULL_SPEED:    clock = 10000000; break;
+  case SPI_HALF_SPEED:    clock =  5000000; break;
+  case SPI_QUARTER_SPEED: clock =  2500000; break;
+  case SPI_EIGHTH_SPEED:  clock =  1250000; break;
+  case SPI_SPEED_5:       clock =   625000; break;
+  case SPI_SPEED_6:       clock =   312500; break;
+  default:
+    clock = 4000000; // Default from the SPI libarary
+  }
+  spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE0);
+  SPI.begin();
+}
+
+uint8_t spiRec() {
+  SPI.beginTransaction(spiConfig);
+  uint8_t returnByte = SPI.transfer(0xFF);
+  SPI.endTransaction();
+  return returnByte;
+  //SPDR = 0xFF;
+  //while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
+  //return SPDR;
+}
+
+void spiRead(uint8_t* buf, uint16_t nbyte) {
+  SPI.beginTransaction(spiConfig);
+  SPI.transfer(buf, nbyte);
+  SPI.endTransaction();
+  //if (nbyte-- == 0) return;
+  //  SPDR = 0xFF;
+  //for (uint16_t i = 0; i < nbyte; i++) {
+  //  while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
+  //  buf[i] = SPDR;
+  //  SPDR = 0xFF;
+  //}
+  //while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
+  //buf[nbyte] = SPDR;
+}
+
+void spiSend(uint8_t b) {
+  SPI.beginTransaction(spiConfig);
+  SPI.transfer(b);
+  SPI.endTransaction();
+  //SPDR = b;
+  //while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
+}
+
+void spiSendBlock(uint8_t token, const uint8_t* buf) {
+  SPI.beginTransaction(spiConfig);
+  SPDR = token;
+  for (uint16_t i = 0; i < 512; i += 2) {
+    while (!TEST(SPSR, SPIF)) { /* nada */ };
+    SPDR = buf[i];
+    while (!TEST(SPSR, SPIF)) { /* nada */ };
+    SPDR = buf[i + 1];
+  }
+  while (!TEST(SPSR, SPIF)) { /* nada */ };
+  SPI.endTransaction();
+}
+
+// Begin SPI transaction, set clock, bit order, data mode
+void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
+  spiConfig = SPISettings(spiClock, bitOrder, dataMode);
+  SPI.beginTransaction(spiConfig);
+}
+
+#endif // SOFTWARE_SPI
+#endif // __IMXRT1062__

Marlin/src/HAL/TEENSY40_41/Servo.cpp

@@ -0,0 +1,57 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#ifdef __IMXRT1062__
+
+#include "../../inc/MarlinConfig.h"
+
+#if HAS_SERVOS
+
+#include "Servo.h"
+
+int8_t libServo::attach(const int inPin) {
+  if (inPin > 0) servoPin = inPin;
+  return super::attach(servoPin);
+}
+
+int8_t libServo::attach(const int inPin, const int inMin, const int inMax) {
+  if (inPin > 0) servoPin = inPin;
+  return super::attach(servoPin, inMin, inMax);
+}
+
+void libServo::move(const int value) {
+  constexpr uint16_t servo_delay[] = SERVO_DELAY;
+  static_assert(COUNT(servo_delay) == NUM_SERVOS, "SERVO_DELAY must be an array NUM_SERVOS long.");
+  if (attach(0) >= 0) {
+    write(value);
+    safe_delay(servo_delay[servoIndex]);
+    TERN_(DEACTIVATE_SERVOS_AFTER_MOVE, detach());
+  }
+}
+
+void libServo::detach() {
+  // PWMServo library does not have detach() function
+  //super::detach();
+}
+
+#endif // HAS_SERVOS
+
+#endif // __IMXRT1062__

Marlin/src/HAL/TEENSY40_41/Servo.h

@@ -0,0 +1,39 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <PWMServo.h>
+
+// Inherit and expand on core Servo library
+class libServo : public PWMServo {
+  public:
+    int8_t attach(const int pin);
+    int8_t attach(const int pin, const int min, const int max);
+    void move(const int value);
+    void detach(void);
+  private:
+    typedef PWMServo super;
+    uint8_t servoPin;
+    uint16_t min_ticks;
+    uint16_t max_ticks;
+    uint8_t servoIndex; // Index into the channel data for this servo
+};

Marlin/src/HAL/TEENSY40_41/eeprom.cpp

@@ -0,0 +1,77 @@
+/**
+ * Marlin 3D Printer Firmware
+ *
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+ * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
+ * Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#ifdef __IMXRT1062__
+
+#include "../../inc/MarlinConfig.h"
+
+#if USE_WIRED_EEPROM
+
+/**
+ * PersistentStore for Arduino-style EEPROM interface
+ * with implementations supplied by the framework.
+ */
+
+#include "../shared/eeprom_api.h"
+#include <avr/eeprom.h>
+
+#ifndef MARLIN_EEPROM_SIZE
+  #define MARLIN_EEPROM_SIZE size_t(E2END + 1)
+#endif
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+
+bool PersistentStore::access_start()  { return true; }
+bool PersistentStore::access_finish() { return true; }
+
+bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
+  while (size--) {
+    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t v = *value;
+    // EEPROM has only ~100,000 write cycles,
+    // so only write bytes that have changed!
+    if (v != eeprom_read_byte(p)) {
+      eeprom_write_byte(p, v);
+      if (eeprom_read_byte(p) != v) {
+        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
+        return true;
+      }
+    }
+    crc16(crc, &v, 1);
+    pos++;
+    value++;
+  }
+  return false;
+}
+
+bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+  do {
+    uint8_t c = eeprom_read_byte((uint8_t*)pos);
+    if (writing) *value = c;
+    crc16(crc, &c, 1);
+    pos++;
+    value++;
+  } while (--size);
+  return false;
+}
+
+#endif // USE_WIRED_EEPROM
+#endif // __IMXRT1062__

Marlin/src/HAL/TEENSY40_41/endstop_interrupts.h

@@ -0,0 +1,66 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Endstop Interrupts
+ *
+ * Without endstop interrupts the endstop pins must be polled continually in
+ * the temperature-ISR via endstops.update(), most of the time finding no change.
+ * With this feature endstops.update() is called only when we know that at
+ * least one endstop has changed state, saving valuable CPU cycles.
+ *
+ * This feature only works when all used endstop pins can generate an 'external interrupt'.
+ *
+ * Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'.
+ * (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino)
+ */
+
+#include "../../module/endstops.h"
+
+// One ISR for all EXT-Interrupts
+void endstop_ISR() { endstops.update(); }
+
+/**
+ * Endstop interrupts for Due based targets.
+ * On Due, all pins support external interrupt capability.
+ */
+void setup_endstop_interrupts() {
+  #define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
+  TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
+  TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
+  TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
+  TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
+  TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
+  TERN_(HAS_Z_MIN, _ATTACH(Z_MIN_PIN));
+  TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
+  TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
+  TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
+  TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
+  TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
+  TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
+  TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
+  TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
+  TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
+  TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
+  TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
+}

Marlin/src/HAL/TEENSY40_41/fastio.h

@@ -0,0 +1,58 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ * Copyright (c) 2017 Victor Perez
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Fast I/O interfaces for Teensy 4
+ * These use GPIO functions instead of Direct Port Manipulation, as on AVR.
+ */
+
+#ifndef PWM
+  #define PWM OUTPUT
+#endif
+
+#define READ(IO)                digitalRead(IO)
+#define WRITE(IO,V)             digitalWrite(IO,V)
+
+#define _GET_MODE(IO)           !is_output(IO)
+#define _SET_MODE(IO,M)         pinMode(IO, M)
+#define _SET_OUTPUT(IO)         pinMode(IO, OUTPUT)                               /*!< Output Push Pull Mode & GPIO_NOPULL   */
+
+#define OUT_WRITE(IO,V)         do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0)
+
+#define SET_INPUT(IO)           _SET_MODE(IO, INPUT)                              /*!< Input Floating Mode                   */
+#define SET_INPUT_PULLUP(IO)    _SET_MODE(IO, INPUT_PULLUP)                       /*!< Input with Pull-up activation         */
+#define SET_INPUT_PULLDOWN(IO)  _SET_MODE(IO, INPUT_PULLDOWN)                     /*!< Input with Pull-down activation       */
+#define SET_OUTPUT(IO)          OUT_WRITE(IO, LOW)
+#define SET_PWM(IO)             _SET_MODE(IO, PWM)
+
+#define TOGGLE(IO)              OUT_WRITE(IO, !READ(IO))
+
+#define IS_INPUT(IO)            !is_output(IO)
+#define IS_OUTPUT(IO)           is_output(IO)
+
+#define PWM_PIN(P)            digitalPinHasPWM(P)
+
+// digitalRead/Write wrappers
+#define extDigitalRead(IO)    digitalRead(IO)
+#define extDigitalWrite(IO,V) digitalWrite(IO,V)

Marlin/src/HAL/TEENSY40_41/inc/Conditionals_LCD.h

@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#if HAS_SPI_TFT || HAS_FSMC_TFT
+  #error "Sorry! TFT displays are not available for HAL/TEENSY40_41."
+#endif

Marlin/src/HAL/TEENSY40_41/inc/Conditionals_adv.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/TEENSY40_41/inc/Conditionals_post.h

@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#if USE_FALLBACK_EEPROM
+  #define USE_WIRED_EEPROM 1
+#endif

Marlin/src/HAL/TEENSY40_41/inc/SanityCheck.h

@@ -0,0 +1,38 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Test TEENSY41 specific configuration values for errors at compile-time.
+ */
+
+#if ENABLED(EMERGENCY_PARSER)
+  #error "EMERGENCY_PARSER is not yet implemented for Teensy 4.0/4.1. Disable EMERGENCY_PARSER to continue."
+#endif
+
+#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
+  #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on Teensy 4.0/4.1."
+#endif
+
+#if HAS_TMC_SW_SERIAL
+  #error "TMC220x Software Serial is not supported on this platform."
+#endif

Marlin/src/HAL/TEENSY40_41/pinsDebug.h

@@ -0,0 +1,146 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#warning "PINS_DEBUGGING is not fully supported for Teensy 4.0 / 4.1 so 'M43' may cause hangs."
+
+#define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
+
+#define digitalRead_mod(p) extDigitalRead(p)  // AVR digitalRead disabled PWM before it read the pin
+#define PRINT_PORT(p)
+#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
+#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%02d"), p); SERIAL_ECHO(buffer); }while(0)
+#define GET_ARRAY_PIN(p) pin_array[p].pin
+#define GET_ARRAY_IS_DIGITAL(p) pin_array[p].is_digital
+#define VALID_PIN(pin) (pin >= 0 && pin < (int8_t)NUMBER_PINS_TOTAL ? 1 : 0)
+#define DIGITAL_PIN_TO_ANALOG_PIN(p) int(p - analogInputToDigitalPin(0))
+#define IS_ANALOG(P) ((P) >= analogInputToDigitalPin(0) && (P) <= analogInputToDigitalPin(13)) || ((P) >= analogInputToDigitalPin(14) && (P) <= analogInputToDigitalPin(17))
+#define pwm_status(pin) HAL_pwm_status(pin)
+#define GET_PINMODE(PIN) (VALID_PIN(pin) && IS_OUTPUT(pin))
+#define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin
+
+struct pwm_pin_info_struct {
+  uint8_t type;    // 0=no pwm, 1=flexpwm, 2=quad
+  uint8_t module;  // 0-3, 0-3
+  uint8_t channel; // 0=X, 1=A, 2=B
+  uint8_t muxval;  //
+};
+
+#define M(a, b) ((((a) - 1) << 4) | (b))
+
+const struct pwm_pin_info_struct pwm_pin_info[] = {
+  {1, M(1, 1), 0, 4},  // FlexPWM1_1_X   0  // AD_B0_03
+  {1, M(1, 0), 0, 4},  // FlexPWM1_0_X   1  // AD_B0_02
+  {1, M(4, 2), 1, 1},  // FlexPWM4_2_A   2  // EMC_04
+  {1, M(4, 2), 2, 1},  // FlexPWM4_2_B   3  // EMC_05
+  {1, M(2, 0), 1, 1},  // FlexPWM2_0_A   4  // EMC_06
+  {1, M(2, 1), 1, 1},  // FlexPWM2_1_A   5  // EMC_08
+  {1, M(2, 2), 1, 2},  // FlexPWM2_2_A   6  // B0_10
+  {1, M(1, 3), 2, 6},  // FlexPWM1_3_B   7  // B1_01
+  {1, M(1, 3), 1, 6},  // FlexPWM1_3_A   8  // B1_00
+  {1, M(2, 2), 2, 2},  // FlexPWM2_2_B   9  // B0_11
+  {2, M(1, 0), 0, 1},  // QuadTimer1_0  10  // B0_00
+  {2, M(1, 2), 0, 1},  // QuadTimer1_2  11  // B0_02
+  {2, M(1, 1), 0, 1},  // QuadTimer1_1  12  // B0_01
+  {2, M(2, 0), 0, 1},  // QuadTimer2_0  13  // B0_03
+  {2, M(3, 2), 0, 1},  // QuadTimer3_2  14  // AD_B1_02
+  {2, M(3, 3), 0, 1},  // QuadTimer3_3  15  // AD_B1_03
+  {0, M(1, 0), 0, 0},
+  {0, M(1, 0), 0, 0},
+  {2, M(3, 1), 0, 1},  // QuadTimer3_1  18  // AD_B1_01
+  {2, M(3, 0), 0, 1},  // QuadTimer3_0  19  // AD_B1_00
+  {0, M(1, 0), 0, 0},
+  {0, M(1, 0), 0, 0},
+  {1, M(4, 0), 1, 1},  // FlexPWM4_0_A  22  // AD_B1_08
+  {1, M(4, 1), 1, 1},  // FlexPWM4_1_A  23  // AD_B1_09
+  {1, M(1, 2), 0, 4},  // FlexPWM1_2_X  24  // AD_B0_12
+  {1, M(1, 3), 0, 4},  // FlexPWM1_3_X  25  // AD_B0_13
+  {0, M(1, 0), 0, 0},
+  {0, M(1, 0), 0, 0},
+  {1, M(3, 1), 2, 1},  // FlexPWM3_1_B  28  // EMC_32
+  {1, M(3, 1), 1, 1},  // FlexPWM3_1_A  29  // EMC_31
+  {0, M(1, 0), 0, 0},
+  {0, M(1, 0), 0, 0},
+  {0, M(1, 0), 0, 0},
+  {1, M(2, 0), 2, 1},  // FlexPWM2_0_B  33  // EMC_07
+  #ifdef ARDUINO_TEENSY40
+    {1, M(1, 1), 2, 1},  // FlexPWM1_1_B  34  // SD_B0_03
+    {1, M(1, 1), 1, 1},  // FlexPWM1_1_A  35  // SD_B0_02
+    {1, M(1, 0), 2, 1},  // FlexPWM1_0_B  36  // SD_B0_01
+    {1, M(1, 0), 1, 1},  // FlexPWM1_0_A  37  // SD_B0_00
+    {1, M(1, 2), 2, 1},  // FlexPWM1_2_B  38  // SD_B0_05
+    {1, M(1, 2), 1, 1},  // FlexPWM1_2_A  39  // SD_B0_04
+  #endif
+  #ifdef ARDUINO_TEENSY41
+    {0, M(1, 0), 0, 0},
+    {0, M(1, 0), 0, 0},
+    {1, M(2, 3), 1, 6},  // FlexPWM2_3_A  36  // B1_00
+    {1, M(2, 3), 2, 6},  // FlexPWM2_3_B  37  // B1_01
+    {0, M(1, 0), 0, 0},
+    {0, M(1, 0), 0, 0},
+    {0, M(1, 0), 0, 0},
+    {0, M(1, 0), 0, 0},
+    {1, M(1, 1), 2, 1},  // FlexPWM1_1_B  42  // SD_B0_03
+    {1, M(1, 1), 1, 1},  // FlexPWM1_1_A  43  // SD_B0_02
+    {1, M(1, 0), 2, 1},  // FlexPWM1_0_B  44  // SD_B0_01
+    {1, M(1, 0), 1, 1},  // FlexPWM1_0_A  45  // SD_B0_00
+    {1, M(1, 2), 2, 1},  // FlexPWM1_2_B  46  // SD_B0_05
+    {1, M(1, 2), 1, 1},  // FlexPWM1_2_A  47  // SD_B0_04
+    {0, M(1, 0), 0, 0},  // duplicate FlexPWM1_0_B
+    {0, M(1, 0), 0, 0},  // duplicate FlexPWM1_2_A
+    {0, M(1, 0), 0, 0},  // duplicate FlexPWM1_2_B
+    {1, M(3, 3), 2, 1},  // FlexPWM3_3_B  51  // EMC_22
+    {0, M(1, 0), 0, 0},  // duplicate FlexPWM1_1_B
+    {0, M(1, 0), 0, 0},  // duplicate FlexPWM1_1_A
+    {1, M(3, 0), 1, 1},  // FlexPWM3_0_A  53  // EMC_29
+  #endif
+};
+
+void HAL_print_analog_pin(char buffer[], int8_t pin) {
+  if (pin <= 23)      sprintf_P(buffer, PSTR("(A%2d)  "), int(pin - 14));
+  else if (pin <= 41) sprintf_P(buffer, PSTR("(A%2d)  "), int(pin - 24));
+}
+
+void HAL_analog_pin_state(char buffer[], int8_t pin) {
+  if (pin <= 23)      sprintf_P(buffer, PSTR("Analog in =% 5d"), analogRead(pin - 14));
+  else if (pin <= 41) sprintf_P(buffer, PSTR("Analog in =% 5d"), analogRead(pin - 24));
+}
+
+#define PWM_PRINT(V) do{ sprintf_P(buffer, PSTR("PWM:  %4d"), V); SERIAL_ECHO(buffer); }while(0)
+
+/**
+ * Print a pin's PWM status.
+ * Return true if it's currently a PWM pin.
+ */
+bool HAL_pwm_status(int8_t pin) {
+  char buffer[20];   // for the sprintf statements
+  const struct pwm_pin_info_struct *info;
+
+  if (pin >= CORE_NUM_DIGITAL) return 0;
+  info = pwm_pin_info + pin;
+
+  if (info->type == 0) return 0;
+
+  /* TODO decode pwm value from timers */
+  // for now just indicate if output is set as pwm
+  PWM_PRINT(*(portConfigRegister(pin)) == info->muxval);
+  return (*(portConfigRegister(pin)) == info->muxval);
+}
+
+static void pwm_details(uint8_t pin) { /* TODO */ }

Marlin/src/HAL/TEENSY40_41/spi_pins.h

@@ -0,0 +1,27 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#define SCK_PIN   13
+#define MISO_PIN  12
+#define MOSI_PIN  11
+#define SS_PIN    20 // SDSS // A.28, A.29, B.21, C.26, C.29

Marlin/src/HAL/TEENSY40_41/timers.cpp

@@ -0,0 +1,114 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Teensy4.0/4.1 (__IMXRT1062__)
+ */
+
+#ifdef __IMXRT1062__
+
+#include "../../inc/MarlinConfig.h"
+
+void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
+  switch (timer_num) {
+    case 0:
+      CCM_CSCMR1 &= ~CCM_CSCMR1_PERCLK_CLK_SEL; // turn off 24mhz mode
+      CCM_CCGR1 |= CCM_CCGR1_GPT1_BUS(CCM_CCGR_ON);
+
+      GPT1_CR = 0;                   // disable timer
+      GPT1_SR = 0x3F;                // clear all prior status
+      GPT1_PR = GPT1_TIMER_PRESCALE - 1;
+      GPT1_CR |= GPT_CR_CLKSRC(1);   //clock selection #1 (peripheral clock = 150 MHz)
+      GPT1_CR |= GPT_CR_ENMOD;       //reset count to zero before enabling
+      GPT1_CR |= GPT_CR_OM1(1);      // toggle mode
+      GPT1_OCR1 = (GPT1_TIMER_RATE / frequency) -1; // Initial compare value
+      GPT1_IR = GPT_IR_OF1IE;        // Compare3 value
+      GPT1_CR |= GPT_CR_EN;          //enable GPT2 counting at 150 MHz
+
+      OUT_WRITE(15, HIGH);
+      attachInterruptVector(IRQ_GPT1, &stepTC_Handler);
+      NVIC_SET_PRIORITY(IRQ_GPT1, 16);
+      break;
+    case 1:
+      CCM_CSCMR1 &= ~CCM_CSCMR1_PERCLK_CLK_SEL; // turn off 24mhz mode
+      CCM_CCGR0 |= CCM_CCGR0_GPT2_BUS(CCM_CCGR_ON);
+
+      GPT2_CR = 0;                   // disable timer
+      GPT2_SR = 0x3F;                // clear all prior status
+      GPT2_PR = GPT2_TIMER_PRESCALE - 1;
+      GPT2_CR |= GPT_CR_CLKSRC(1);   //clock selection #1 (peripheral clock = 150 MHz)
+      GPT2_CR |= GPT_CR_ENMOD;       //reset count to zero before enabling
+      GPT2_CR |= GPT_CR_OM1(1);      // toggle mode
+      GPT2_OCR1 = (GPT2_TIMER_RATE / frequency) -1; // Initial compare value
+      GPT2_IR = GPT_IR_OF1IE;        // Compare3 value
+      GPT2_CR |= GPT_CR_EN;          //enable GPT2 counting at 150 MHz
+
+      OUT_WRITE(14, HIGH);
+      attachInterruptVector(IRQ_GPT2, &tempTC_Handler);
+      NVIC_SET_PRIORITY(IRQ_GPT2, 32);
+      break;
+  }
+}
+
+void HAL_timer_enable_interrupt(const uint8_t timer_num) {
+  switch (timer_num) {
+    case 0:
+      NVIC_ENABLE_IRQ(IRQ_GPT1);
+      break;
+    case 1:
+      NVIC_ENABLE_IRQ(IRQ_GPT2);
+      break;
+  }
+}
+
+void HAL_timer_disable_interrupt(const uint8_t timer_num) {
+  switch (timer_num) {
+    case 0: NVIC_DISABLE_IRQ(IRQ_GPT1); break;
+    case 1: NVIC_DISABLE_IRQ(IRQ_GPT2); break;
+  }
+
+  // We NEED memory barriers to ensure Interrupts are actually disabled!
+  // ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
+  asm volatile("dsb");
+}
+
+bool HAL_timer_interrupt_enabled(const uint8_t timer_num) {
+  switch (timer_num) {
+    case 0: return (NVIC_IS_ENABLED(IRQ_GPT1));
+    case 1: return (NVIC_IS_ENABLED(IRQ_GPT2));
+  }
+  return false;
+}
+
+void HAL_timer_isr_prologue(const uint8_t timer_num) {
+  switch (timer_num) {
+    case 0:
+      GPT1_SR = GPT_IR_OF1IE;  // clear OF3 bit
+      break;
+    case 1:
+      GPT2_SR = GPT_IR_OF1IE;  // clear OF3 bit
+      break;
+  }
+  asm volatile("dsb");
+}
+
+#endif // __IMXRT1062__

Marlin/src/HAL/TEENSY40_41/timers.h

@@ -0,0 +1,120 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+ * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Description: HAL for
+ * Teensy4.0/4.1 (__IMXRT1062__)
+ */
+
+#include <stdint.h>
+
+// ------------------------
+// Defines
+// ------------------------
+
+#define FORCE_INLINE __attribute__((always_inline)) inline
+
+typedef uint32_t hal_timer_t;
+#define HAL_TIMER_TYPE_MAX 0xFFFFFFFE
+
+#define GPT_TIMER_RATE F_BUS_ACTUAL   // 150MHz
+
+#define GPT1_TIMER_PRESCALE 2
+#define GPT2_TIMER_PRESCALE 10
+
+#define GPT1_TIMER_RATE (GPT_TIMER_RATE / GPT1_TIMER_PRESCALE) // 75MHz
+#define GPT2_TIMER_RATE (GPT_TIMER_RATE / GPT2_TIMER_PRESCALE) // 15MHz
+
+#ifndef STEP_TIMER_NUM
+  #define STEP_TIMER_NUM        0  // Timer Index for Stepper
+#endif
+#ifndef PULSE_TIMER_NUM
+  #define PULSE_TIMER_NUM       STEP_TIMER_NUM
+#endif
+#ifndef TEMP_TIMER_NUM
+  #define TEMP_TIMER_NUM        1  // Timer Index for Temperature
+#endif
+
+#define TEMP_TIMER_RATE        1000000
+#define TEMP_TIMER_FREQUENCY   1000
+
+#define STEPPER_TIMER_RATE     GPT1_TIMER_RATE
+#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000)
+#define STEPPER_TIMER_PRESCALE ((GPT_TIMER_RATE / 1000000) / STEPPER_TIMER_TICKS_PER_US)
+
+#define PULSE_TIMER_RATE       STEPPER_TIMER_RATE   // frequency of pulse timer
+#define PULSE_TIMER_PRESCALE   STEPPER_TIMER_PRESCALE
+#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
+
+#define ENABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_enable_interrupt(STEP_TIMER_NUM)
+#define DISABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_disable_interrupt(STEP_TIMER_NUM)
+#define STEPPER_ISR_ENABLED() HAL_timer_interrupt_enabled(STEP_TIMER_NUM)
+
+#define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM)
+#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM)
+
+#ifndef HAL_STEP_TIMER_ISR
+  #define HAL_STEP_TIMER_ISR()  extern "C" void stepTC_Handler() // GPT1_Handler()
+#endif
+#ifndef HAL_TEMP_TIMER_ISR
+  #define HAL_TEMP_TIMER_ISR()  extern "C" void tempTC_Handler() // GPT2_Handler()
+#endif
+
+extern "C" void stepTC_Handler();
+extern "C" void tempTC_Handler();
+
+void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency);
+
+FORCE_INLINE static void HAL_timer_set_compare(const uint8_t timer_num, const hal_timer_t compare) {
+  switch (timer_num) {
+    case 0:
+      GPT1_OCR1 = compare - 1;
+      break;
+    case 1:
+      GPT2_OCR1 = compare - 1;
+      break;
+  }
+}
+
+FORCE_INLINE static hal_timer_t HAL_timer_get_compare(const uint8_t timer_num) {
+  switch (timer_num) {
+    case 0: return GPT1_OCR1;
+    case 1: return GPT2_OCR1;
+  }
+  return 0;
+}
+
+FORCE_INLINE static hal_timer_t HAL_timer_get_count(const uint8_t timer_num) {
+  switch (timer_num) {
+    case 0: return GPT1_CNT;
+    case 1: return GPT2_CNT;
+  }
+  return 0;
+}
+
+void HAL_timer_enable_interrupt(const uint8_t timer_num);
+void HAL_timer_disable_interrupt(const uint8_t timer_num);
+bool HAL_timer_interrupt_enabled(const uint8_t timer_num);
+
+void HAL_timer_isr_prologue(const uint8_t timer_num);
+//void HAL_timer_isr_epilogue(const uint8_t timer_num) {}
+#define HAL_timer_isr_epilogue(TIMER_NUM)

Marlin/src/HAL/TEENSY40_41/watchdog.cpp

@@ -0,0 +1,52 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#ifdef __IMXRT1062__
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(USE_WATCHDOG)
+
+#include "watchdog.h"
+
+// 4 seconds timeout
+#define WDTO 4 //seconds
+
+uint8_t timeoutval = (WDTO - 0.5f) / 0.5f;
+
+void watchdog_init() {
+
+  CCM_CCGR3 |= CCM_CCGR3_WDOG1(3);  // enable WDOG1 clocks
+  WDOG1_WMCR = 0;                   // disable power down PDE
+  WDOG1_WCR |= WDOG_WCR_SRS | WDOG_WCR_WT(timeoutval);
+  WDOG1_WCR |= WDOG_WCR_WDE | WDOG_WCR_WDT | WDOG_WCR_SRE;
+
+}
+
+void HAL_watchdog_refresh() {
+  // Watchdog refresh sequence
+  WDOG1_WSR = 0x5555;
+  WDOG1_WSR = 0xAAAA;
+}
+
+#endif // USE_WATCHDOG
+
+#endif // __IMXRT1062__

Marlin/src/HAL/TEENSY40_41/watchdog.h

@@ -0,0 +1,30 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Watchdog for Teensy4.0/4.1 (__IMXRT1062__)
+ */
+
+void watchdog_init();
+
+void HAL_watchdog_refresh();

Marlin/src/HAL/platforms.h

@@ -31,6 +31,8 @@
   #define HAL_PATH(PATH, NAME) XSTR(PATH/TEENSY31_32/NAME)
 #elif defined(__MK64FX512__) || defined(__MK66FX1M0__)
   #define HAL_PATH(PATH, NAME) XSTR(PATH/TEENSY35_36/NAME)
+#elif defined(__IMXRT1062__)
+  #define HAL_PATH(PATH, NAME) XSTR(PATH/TEENSY40_41/NAME)
 #elif defined(TARGET_LPC1768)
   #define HAL_PATH(PATH, NAME) XSTR(PATH/LPC1768/NAME)
 #elif defined(__STM32F1__) || defined(TARGET_STM32F1)

Marlin/src/HAL/shared/HAL_ST7920.h

@@ -27,7 +27,7 @@
  * (bypassing U8G), it will allow the LIGHTWEIGHT_UI to operate.
  */
 
-#if BOTH(HAS_GRAPHICAL_LCD, LIGHTWEIGHT_UI)
+#if BOTH(HAS_MARLINUI_U8GLIB, LIGHTWEIGHT_UI)
   void ST7920_cs();
   void ST7920_ncs();
   void ST7920_set_cmd();

Marlin/src/HAL/shared/backtrace/unwmemaccess.cpp

@@ -20,124 +20,139 @@
 /* Validate address */
 
 #ifdef ARDUINO_ARCH_SAM
-// For DUE, valid address ranges are
-//  SRAM  (0x20070000 - 0x20088000) (96kb)
-//  FLASH (0x00080000 - 0x00100000) (512kb)
-//
-#define START_SRAM_ADDR   0x20070000
-#define END_SRAM_ADDR     0x20088000
-#define START_FLASH_ADDR  0x00080000
-#define END_FLASH_ADDR    0x00100000
-#endif
 
-#ifdef TARGET_LPC1768
+  // For DUE, valid address ranges are
-// For LPC1769:
+  //  SRAM  (0x20070000 - 0x20088000) (96kb)
-//  SRAM  (0x10000000 - 0x10008000) (32kb)
+  //  FLASH (0x00080000 - 0x00100000) (512kb)
-//  FLASH (0x00000000 - 0x00080000) (512kb)
+  //
-//
+  #define START_SRAM_ADDR   0x20070000
-#define START_SRAM_ADDR   0x10000000
+  #define END_SRAM_ADDR     0x20088000
-#define END_SRAM_ADDR     0x10008000
+  #define START_FLASH_ADDR  0x00080000
-#define START_FLASH_ADDR  0x00000000
+  #define END_FLASH_ADDR    0x00100000
-#define END_FLASH_ADDR    0x00080000
-#endif
 
-#if 0
+#elif defined(TARGET_LPC1768)
-// For STM32F103CBT6
-//  SRAM  (0x20000000 - 0x20005000) (20kb)
-//  FLASH (0x00000000 - 0x00020000) (128kb)
-//
-#define START_SRAM_ADDR   0x20000000
-#define END_SRAM_ADDR     0x20005000
-#define START_FLASH_ADDR  0x00000000
-#define END_FLASH_ADDR    0x00020000
-#endif
 
-#if defined(__STM32F1__) || defined(STM32F1xx) || defined(STM32F0xx)
+  // For LPC1769:
-// For STM32F103ZET6/STM32F103VET6/STM32F0xx
+  //  SRAM  (0x10000000 - 0x10008000) (32kb)
-//  SRAM  (0x20000000 - 0x20010000) (64kb)
+  //  FLASH (0x00000000 - 0x00080000) (512kb)
-//  FLASH (0x00000000 - 0x00080000) (512kb)
+  //
-//
+  #define START_SRAM_ADDR   0x10000000
-#define START_SRAM_ADDR   0x20000000
+  #define END_SRAM_ADDR     0x10008000
-#define END_SRAM_ADDR     0x20010000
+  #define START_FLASH_ADDR  0x00000000
-#define START_FLASH_ADDR  0x00000000
+  #define END_FLASH_ADDR    0x00080000
-#define END_FLASH_ADDR    0x00080000
-#endif
 
-#if defined(STM32F4) || defined(STM32F4xx)
+#elif 0
-// For STM32F407VET
-//  SRAM  (0x20000000 - 0x20030000) (192kb)
-//  FLASH (0x08000000 - 0x08080000) (512kb)
-//
-#define START_SRAM_ADDR   0x20000000
-#define END_SRAM_ADDR     0x20030000
-#define START_FLASH_ADDR  0x08000000
-#define END_FLASH_ADDR    0x08080000
-#endif
 
-#if MB(THE_BORG)
+  // For STM32F103CBT6
-// For STM32F765 in BORG
+  //  SRAM  (0x20000000 - 0x20005000) (20kb)
-//  SRAM  (0x20000000 - 0x20080000) (512kb)
+  //  FLASH (0x00000000 - 0x00020000) (128kb)
-//  FLASH (0x08000000 - 0x08100000) (1024kb)
+  //
-//
+  #define START_SRAM_ADDR   0x20000000
-#define START_SRAM_ADDR   0x20000000
+  #define END_SRAM_ADDR     0x20005000
-#define END_SRAM_ADDR     0x20080000
+  #define START_FLASH_ADDR  0x00000000
-#define START_FLASH_ADDR  0x08000000
+  #define END_FLASH_ADDR    0x00020000
-#define END_FLASH_ADDR    0x08100000
-#endif
 
-#if MB(REMRAM_V1)
+#elif defined(__STM32F1__) || defined(STM32F1xx) || defined(STM32F0xx)
-// For STM32F765VI in RemRam v1
-//  SRAM  (0x20000000 - 0x20080000) (512kb)
-//  FLASH (0x08000000 - 0x08200000) (2048kb)
-//
-#define START_SRAM_ADDR   0x20000000
-#define END_SRAM_ADDR     0x20080000
-#define START_FLASH_ADDR  0x08000000
-#define END_FLASH_ADDR    0x08200000
-#endif
 
-#ifdef __MK20DX256__
+  // For STM32F103ZET6/STM32F103VET6/STM32F0xx
-// For MK20DX256 in TEENSY 3.1 or TEENSY 3.2
+  //  SRAM  (0x20000000 - 0x20010000) (64kb)
-//  SRAM  (0x1FFF8000 - 0x20008000) (64kb)
+  //  FLASH (0x00000000 - 0x00080000) (512kb)
-//  FLASH (0x00000000 - 0x00040000) (256kb)
+  //
-//
+  #define START_SRAM_ADDR   0x20000000
-#define START_SRAM_ADDR   0x1FFF8000
+  #define END_SRAM_ADDR     0x20010000
-#define END_SRAM_ADDR     0x20008000
+  #define START_FLASH_ADDR  0x00000000
-#define START_FLASH_ADDR  0x00000000
+  #define END_FLASH_ADDR    0x00080000
-#define END_FLASH_ADDR    0x00040000
-#endif
 
-#ifdef __MK64FX512__
+#elif defined(STM32F4) || defined(STM32F4xx)
-// For MK64FX512 in TEENSY 3.5
-//  SRAM  (0x1FFF0000 - 0x20020000) (192kb)
-//  FLASH (0x00000000 - 0x00080000) (512kb)
-//
-#define START_SRAM_ADDR   0x1FFF0000
-#define END_SRAM_ADDR     0x20020000
-#define START_FLASH_ADDR  0x00000000
-#define END_FLASH_ADDR    0x00080000
-#endif
 
-#ifdef __MK66FX1M0__
+  // For STM32F407VET
-// For MK66FX1M0 in TEENSY 3.6
+  //  SRAM  (0x20000000 - 0x20030000) (192kb)
-//  SRAM  (0x1FFF0000 - 0x20030000) (256kb)
+  //  FLASH (0x08000000 - 0x08080000) (512kb)
-//  FLASH (0x00000000 - 0x00140000) (1.25Mb)
+  //
-//
+  #define START_SRAM_ADDR   0x20000000
-#define START_SRAM_ADDR   0x1FFF0000
+  #define END_SRAM_ADDR     0x20030000
-#define END_SRAM_ADDR     0x20030000
+  #define START_FLASH_ADDR  0x08000000
-#define START_FLASH_ADDR  0x00000000
+  #define END_FLASH_ADDR    0x08080000
-#define END_FLASH_ADDR    0x00140000
+
-#endif
+#elif MB(THE_BORG)
+
+  // For STM32F765 in BORG
+  //  SRAM  (0x20000000 - 0x20080000) (512kb)
+  //  FLASH (0x08000000 - 0x08100000) (1024kb)
+  //
+  #define START_SRAM_ADDR   0x20000000
+  #define END_SRAM_ADDR     0x20080000
+  #define START_FLASH_ADDR  0x08000000
+  #define END_FLASH_ADDR    0x08100000
+
+#elif MB(REMRAM_V1)
+
+  // For STM32F765VI in RemRam v1
+  //  SRAM  (0x20000000 - 0x20080000) (512kb)
+  //  FLASH (0x08000000 - 0x08200000) (2048kb)
+  //
+  #define START_SRAM_ADDR   0x20000000
+  #define END_SRAM_ADDR     0x20080000
+  #define START_FLASH_ADDR  0x08000000
+  #define END_FLASH_ADDR    0x08200000
+
+#elif defined(__MK20DX256__)
+
+  // For MK20DX256 in TEENSY 3.1 or TEENSY 3.2
+  //  SRAM  (0x1FFF8000 - 0x20008000) (64kb)
+  //  FLASH (0x00000000 - 0x00040000) (256kb)
+  //
+  #define START_SRAM_ADDR   0x1FFF8000
+  #define END_SRAM_ADDR     0x20008000
+  #define START_FLASH_ADDR  0x00000000
+  #define END_FLASH_ADDR    0x00040000
+
+#elif defined(__MK64FX512__)
+
+  // For MK64FX512 in TEENSY 3.5
+  //  SRAM  (0x1FFF0000 - 0x20020000) (192kb)
+  //  FLASH (0x00000000 - 0x00080000) (512kb)
+  //
+  #define START_SRAM_ADDR   0x1FFF0000
+  #define END_SRAM_ADDR     0x20020000
+  #define START_FLASH_ADDR  0x00000000
+  #define END_FLASH_ADDR    0x00080000
+
+#elif defined(__MK66FX1M0__)
+
+  // For MK66FX1M0 in TEENSY 3.6
+  //  SRAM  (0x1FFF0000 - 0x20030000) (256kb)
+  //  FLASH (0x00000000 - 0x00140000) (1.25Mb)
+  //
+  #define START_SRAM_ADDR   0x1FFF0000
+  #define END_SRAM_ADDR     0x20030000
+  #define START_FLASH_ADDR  0x00000000
+  #define END_FLASH_ADDR    0x00140000
+
+#elif defined(__IMXRT1062__)
+
+  // For IMXRT1062 in TEENSY 4.0/4/1
+  //  ITCM (rwx):  ORIGIN = 0x00000000, LENGTH = 512K
+  //  DTCM (rwx):  ORIGIN = 0x20000000, LENGTH = 512K
+  //  RAM (rwx):   ORIGIN = 0x20200000, LENGTH = 512K
+  //  FLASH (rwx): ORIGIN = 0x60000000, LENGTH = 1984K
+  //
+  #define START_SRAM_ADDR   0x00000000
+  #define END_SRAM_ADDR     0x20280000
+  #define START_FLASH_ADDR  0x60000000
+  #define END_FLASH_ADDR    0x601F0000
+
+#elif defined(__SAMD51P20A__)
+
+  // For SAMD51x20, valid address ranges are
+  //  SRAM  (0x20000000 - 0x20040000) (256kb)
+  //  FLASH (0x00000000 - 0x00100000) (1024kb)
+  //
+  #define START_SRAM_ADDR   0x20000000
+  #define END_SRAM_ADDR     0x20040000
+  #define START_FLASH_ADDR  0x00000000
+  #define END_FLASH_ADDR    0x00100000
 
-#ifdef __SAMD51P20A__
-// For SAMD51x20, valid address ranges are
-//  SRAM  (0x20000000 - 0x20040000) (256kb)
-//  FLASH (0x00000000 - 0x00100000) (1024kb)
-//
-#define START_SRAM_ADDR   0x20000000
-#define END_SRAM_ADDR     0x20040000
-#define START_FLASH_ADDR  0x00000000
-#define END_FLASH_ADDR    0x00100000
 #endif
 
 static bool validate_addr(uint32_t addr) {
@@ -177,4 +192,4 @@ bool UnwReadB(const uint32_t a, uint8_t *v) {
   return true;
 }
 
-#endif
+#endif // __arm__ || __thumb__