diff --git a/Marlin/src/HAL/AVR/pinsDebug.h b/Marlin/src/HAL/AVR/pinsDebug.h index 5fc48a1edc..fcbb7af3e1 100644 --- a/Marlin/src/HAL/AVR/pinsDebug.h +++ b/Marlin/src/HAL/AVR/pinsDebug.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/HAL/AVR/pinsDebug_Teensyduino.h b/Marlin/src/HAL/AVR/pinsDebug_Teensyduino.h index 051972a861..582ae79ba7 100644 --- a/Marlin/src/HAL/AVR/pinsDebug_Teensyduino.h +++ b/Marlin/src/HAL/AVR/pinsDebug_Teensyduino.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/HAL/AVR/pinsDebug_plus_70.h b/Marlin/src/HAL/AVR/pinsDebug_plus_70.h index db3fdf1f76..d9aa44c3cb 100644 --- a/Marlin/src/HAL/AVR/pinsDebug_plus_70.h +++ b/Marlin/src/HAL/AVR/pinsDebug_plus_70.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp index fcfcef88be..68f6a5c1a7 100644 --- a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp +++ b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp @@ -20,7 +20,6 @@ * */ - /** * Based on u8g_com_msp430_hw_spi.c * diff --git a/Marlin/src/HAL/DUE/pinsDebug.h b/Marlin/src/HAL/DUE/pinsDebug.h index 225ba95ce9..f01c53c8ce 100644 --- a/Marlin/src/HAL/DUE/pinsDebug.h +++ b/Marlin/src/HAL/DUE/pinsDebug.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/HAL/ESP32/spi_pins.h b/Marlin/src/HAL/ESP32/spi_pins.h index cfe71eee4a..58881f0ea7 100644 --- a/Marlin/src/HAL/ESP32/spi_pins.h +++ b/Marlin/src/HAL/ESP32/spi_pins.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/HAL/LINUX/main.cpp b/Marlin/src/HAL/LINUX/main.cpp index 31f6de98ee..f2af2ff33f 100644 --- a/Marlin/src/HAL/LINUX/main.cpp +++ b/Marlin/src/HAL/LINUX/main.cpp @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or @@ -16,6 +19,7 @@ * along with this program. If not, see . * */ + #ifdef __PLAT_LINUX__ //#define GPIO_LOGGING // Full GPIO and Positional Logging diff --git a/Marlin/src/HAL/LINUX/pinsDebug.h b/Marlin/src/HAL/LINUX/pinsDebug.h index 9803c5d362..7bfd97d024 100644 --- a/Marlin/src/HAL/LINUX/pinsDebug.h +++ b/Marlin/src/HAL/LINUX/pinsDebug.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/HAL/LPC1768/pinsDebug.h b/Marlin/src/HAL/LPC1768/pinsDebug.h index 466bf170b4..a2f5c123a2 100644 --- a/Marlin/src/HAL/LPC1768/pinsDebug.h +++ b/Marlin/src/HAL/LPC1768/pinsDebug.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/HAL/NATIVE_SIM/pinsDebug.h b/Marlin/src/HAL/NATIVE_SIM/pinsDebug.h index 7e50492598..aa90eb39a3 100644 --- a/Marlin/src/HAL/NATIVE_SIM/pinsDebug.h +++ b/Marlin/src/HAL/NATIVE_SIM/pinsDebug.h @@ -20,7 +20,6 @@ /** * Support routines for X86_64 */ - #pragma once /** diff --git a/Marlin/src/HAL/SAMD51/QSPIFlash.h b/Marlin/src/HAL/SAMD51/QSPIFlash.h index db4abec91c..58822fe05f 100644 --- a/Marlin/src/HAL/SAMD51/QSPIFlash.h +++ b/Marlin/src/HAL/SAMD51/QSPIFlash.h @@ -25,7 +25,6 @@ * * Derived from Adafruit_SPIFlash class with no SdFat references */ - #pragma once #include diff --git a/Marlin/src/HAL/STM32/MarlinSPI.cpp b/Marlin/src/HAL/STM32/MarlinSPI.cpp index e1be50820f..7078d210dc 100644 --- a/Marlin/src/HAL/STM32/MarlinSPI.cpp +++ b/Marlin/src/HAL/STM32/MarlinSPI.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../platforms.h" #if defined(HAL_STM32) && !defined(STM32H7xx) diff --git a/Marlin/src/HAL/STM32/MarlinSerial.cpp b/Marlin/src/HAL/STM32/MarlinSerial.cpp index 3caedc72eb..37a8f40fd0 100644 --- a/Marlin/src/HAL/STM32/MarlinSerial.cpp +++ b/Marlin/src/HAL/STM32/MarlinSerial.cpp @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or @@ -16,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../platforms.h" #ifdef HAL_STM32 diff --git a/Marlin/src/HAL/STM32/MarlinSerial.h b/Marlin/src/HAL/STM32/MarlinSerial.h index ab5c4260af..bf861fb8a7 100644 --- a/Marlin/src/HAL/STM32/MarlinSerial.h +++ b/Marlin/src/HAL/STM32/MarlinSerial.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp b/Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp index 914969f10c..54e1820c78 100644 --- a/Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp +++ b/Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../platforms.h" #ifdef HAL_STM32 diff --git a/Marlin/src/HAL/STM32/eeprom_bl24cxx.cpp b/Marlin/src/HAL/STM32/eeprom_bl24cxx.cpp index 5bd4c18577..f30b3dedb2 100644 --- a/Marlin/src/HAL/STM32/eeprom_bl24cxx.cpp +++ b/Marlin/src/HAL/STM32/eeprom_bl24cxx.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../platforms.h" #ifdef HAL_STM32 diff --git a/Marlin/src/HAL/STM32/eeprom_if_iic.cpp b/Marlin/src/HAL/STM32/eeprom_if_iic.cpp index 26b3d9044e..ad8712c0c0 100644 --- a/Marlin/src/HAL/STM32/eeprom_if_iic.cpp +++ b/Marlin/src/HAL/STM32/eeprom_if_iic.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../platforms.h" #ifdef HAL_STM32 diff --git a/Marlin/src/HAL/STM32/eeprom_sdcard.cpp b/Marlin/src/HAL/STM32/eeprom_sdcard.cpp index 77563b2ae5..473b656f9a 100644 --- a/Marlin/src/HAL/STM32/eeprom_sdcard.cpp +++ b/Marlin/src/HAL/STM32/eeprom_sdcard.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../platforms.h" #ifdef HAL_STM32 diff --git a/Marlin/src/HAL/STM32/fast_pwm.cpp b/Marlin/src/HAL/STM32/fast_pwm.cpp index a8fcbe5f82..917e12615f 100644 --- a/Marlin/src/HAL/STM32/fast_pwm.cpp +++ b/Marlin/src/HAL/STM32/fast_pwm.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../platforms.h" #ifdef HAL_STM32 diff --git a/Marlin/src/HAL/STM32/pinsDebug.h b/Marlin/src/HAL/STM32/pinsDebug.h index c77dbc4c75..73d850fc43 100644 --- a/Marlin/src/HAL/STM32/pinsDebug.h +++ b/Marlin/src/HAL/STM32/pinsDebug.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/HAL/STM32/spi_pins.h b/Marlin/src/HAL/STM32/spi_pins.h index e2052c5c77..7f341a8c25 100644 --- a/Marlin/src/HAL/STM32/spi_pins.h +++ b/Marlin/src/HAL/STM32/spi_pins.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/HAL/STM32/tft/tft_fsmc.cpp b/Marlin/src/HAL/STM32/tft/tft_fsmc.cpp index dacf533224..e68b3c1269 100644 --- a/Marlin/src/HAL/STM32/tft/tft_fsmc.cpp +++ b/Marlin/src/HAL/STM32/tft/tft_fsmc.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../platforms.h" #ifdef HAL_STM32 diff --git a/Marlin/src/HAL/STM32/tft/tft_spi.cpp b/Marlin/src/HAL/STM32/tft/tft_spi.cpp index 29a309f40e..790513e7ed 100644 --- a/Marlin/src/HAL/STM32/tft/tft_spi.cpp +++ b/Marlin/src/HAL/STM32/tft/tft_spi.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../platforms.h" #ifdef HAL_STM32 diff --git a/Marlin/src/HAL/STM32/tft/xpt2046.cpp b/Marlin/src/HAL/STM32/tft/xpt2046.cpp index 912e6c2db7..cf4a8f18e9 100644 --- a/Marlin/src/HAL/STM32/tft/xpt2046.cpp +++ b/Marlin/src/HAL/STM32/tft/xpt2046.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../platforms.h" #ifdef HAL_STM32 diff --git a/Marlin/src/HAL/STM32/usb_host.cpp b/Marlin/src/HAL/STM32/usb_host.cpp index f0879a36a4..d77f0b28e9 100644 --- a/Marlin/src/HAL/STM32/usb_host.cpp +++ b/Marlin/src/HAL/STM32/usb_host.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../platforms.h" #ifdef HAL_STM32 diff --git a/Marlin/src/HAL/STM32/usb_serial.cpp b/Marlin/src/HAL/STM32/usb_serial.cpp index 959ca4ff43..b607275db5 100644 --- a/Marlin/src/HAL/STM32/usb_serial.cpp +++ b/Marlin/src/HAL/STM32/usb_serial.cpp @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or @@ -16,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../platforms.h" #ifdef HAL_STM32 diff --git a/Marlin/src/HAL/STM32/usb_serial.h b/Marlin/src/HAL/STM32/usb_serial.h index ca61b9ed23..3edb6fd618 100644 --- a/Marlin/src/HAL/STM32/usb_serial.h +++ b/Marlin/src/HAL/STM32/usb_serial.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/HAL/STM32/watchdog.cpp b/Marlin/src/HAL/STM32/watchdog.cpp index 72c74a2e3b..1eccdec498 100644 --- a/Marlin/src/HAL/STM32/watchdog.cpp +++ b/Marlin/src/HAL/STM32/watchdog.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../platforms.h" #ifdef HAL_STM32 diff --git a/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp b/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp index f1cd6b3730..26ea1ea19a 100644 --- a/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp +++ b/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or @@ -16,6 +19,7 @@ * along with this program. If not, see . * */ + #ifdef __STM32F1__ #include "../../../inc/MarlinConfig.h" diff --git a/Marlin/src/HAL/STM32F1/eeprom_wired.cpp b/Marlin/src/HAL/STM32F1/eeprom_wired.cpp index 4cac36554f..bc48eef34f 100644 --- a/Marlin/src/HAL/STM32F1/eeprom_wired.cpp +++ b/Marlin/src/HAL/STM32F1/eeprom_wired.cpp @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/HAL/STM32F1/pinsDebug.h b/Marlin/src/HAL/STM32F1/pinsDebug.h index dcf3a51138..27f4b6732b 100644 --- a/Marlin/src/HAL/STM32F1/pinsDebug.h +++ b/Marlin/src/HAL/STM32F1/pinsDebug.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/HAL/STM32F1/spi_pins.h b/Marlin/src/HAL/STM32F1/spi_pins.h index 7d650ffe37..3d3c8f8d2f 100644 --- a/Marlin/src/HAL/STM32F1/spi_pins.h +++ b/Marlin/src/HAL/STM32F1/spi_pins.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/HAL/TEENSY31_32/eeprom.cpp b/Marlin/src/HAL/TEENSY31_32/eeprom.cpp index 85febebebc..d1ff940822 100644 --- a/Marlin/src/HAL/TEENSY31_32/eeprom.cpp +++ b/Marlin/src/HAL/TEENSY31_32/eeprom.cpp @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or @@ -16,6 +19,7 @@ * along with this program. If not, see . * */ + #ifdef __MK20DX256__ /** diff --git a/Marlin/src/HAL/TEENSY35_36/pinsDebug.h b/Marlin/src/HAL/TEENSY35_36/pinsDebug.h index e529fa93be..7a2e1d6e59 100644 --- a/Marlin/src/HAL/TEENSY35_36/pinsDebug.h +++ b/Marlin/src/HAL/TEENSY35_36/pinsDebug.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/HAL/TEENSY40_41/pinsDebug.h b/Marlin/src/HAL/TEENSY40_41/pinsDebug.h index 197cc6f1b2..94b85ea568 100644 --- a/Marlin/src/HAL/TEENSY40_41/pinsDebug.h +++ b/Marlin/src/HAL/TEENSY40_41/pinsDebug.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/HAL/shared/Delay.cpp b/Marlin/src/HAL/shared/Delay.cpp index 05af38307b..32543c6d0a 100644 --- a/Marlin/src/HAL/shared/Delay.cpp +++ b/Marlin/src/HAL/shared/Delay.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "Delay.h" #include "../../inc/MarlinConfig.h" diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp index 20408d8d1e..be5f6fee12 100644 --- a/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp +++ b/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfig.h" #if ENABLED(AUTO_BED_LEVELING_UBL) diff --git a/Marlin/src/feature/cancel_object.cpp b/Marlin/src/feature/cancel_object.cpp index ee5716888d..9d50bfc0d4 100644 --- a/Marlin/src/feature/cancel_object.cpp +++ b/Marlin/src/feature/cancel_object.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../inc/MarlinConfig.h" #if ENABLED(CANCEL_OBJECTS) diff --git a/Marlin/src/feature/closedloop.cpp b/Marlin/src/feature/closedloop.cpp index 8a97f0c0cd..1b9f711a6b 100644 --- a/Marlin/src/feature/closedloop.cpp +++ b/Marlin/src/feature/closedloop.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../inc/MarlinConfig.h" #if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) diff --git a/Marlin/src/feature/direct_stepping.cpp b/Marlin/src/feature/direct_stepping.cpp index 2698b53dd6..ce979145a1 100644 --- a/Marlin/src/feature/direct_stepping.cpp +++ b/Marlin/src/feature/direct_stepping.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../inc/MarlinConfigPre.h" #if ENABLED(DIRECT_STEPPING) diff --git a/Marlin/src/feature/repeat.cpp b/Marlin/src/feature/repeat.cpp index b52feb4a00..165f71fd0f 100644 --- a/Marlin/src/feature/repeat.cpp +++ b/Marlin/src/feature/repeat.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../inc/MarlinConfig.h" #if ENABLED(GCODE_REPEAT_MARKERS) diff --git a/Marlin/src/gcode/calibrate/M12.cpp b/Marlin/src/gcode/calibrate/M12.cpp index da24454375..191ff22d7d 100644 --- a/Marlin/src/gcode/calibrate/M12.cpp +++ b/Marlin/src/gcode/calibrate/M12.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../inc/MarlinConfigPre.h" #if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) diff --git a/Marlin/src/gcode/config/M281.cpp b/Marlin/src/gcode/config/M281.cpp index b6644eb4ab..ac91f08cb4 100644 --- a/Marlin/src/gcode/config/M281.cpp +++ b/Marlin/src/gcode/config/M281.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../inc/MarlinConfig.h" #if ENABLED(EDITABLE_SERVO_ANGLES) diff --git a/Marlin/src/gcode/feature/pause/G27.cpp b/Marlin/src/gcode/feature/pause/G27.cpp index 3ce618d675..f61453e6fb 100644 --- a/Marlin/src/gcode/feature/pause/G27.cpp +++ b/Marlin/src/gcode/feature/pause/G27.cpp @@ -20,7 +20,6 @@ * */ - #include "../../../inc/MarlinConfig.h" #if ENABLED(NOZZLE_PARK_FEATURE) diff --git a/Marlin/src/gcode/gcode_d.cpp b/Marlin/src/gcode/gcode_d.cpp index 3baff46836..83646ef67c 100644 --- a/Marlin/src/gcode/gcode_d.cpp +++ b/Marlin/src/gcode/gcode_d.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../inc/MarlinConfigPre.h" #if ENABLED(MARLIN_DEV_MODE) diff --git a/Marlin/src/gcode/host/M360.cpp b/Marlin/src/gcode/host/M360.cpp index cec8df7542..1830dea3bf 100644 --- a/Marlin/src/gcode/host/M360.cpp +++ b/Marlin/src/gcode/host/M360.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../inc/MarlinConfig.h" #if ENABLED(REPETIER_GCODE_M360) diff --git a/Marlin/src/gcode/host/M876.cpp b/Marlin/src/gcode/host/M876.cpp index 0d8256cf08..00efb013d2 100644 --- a/Marlin/src/gcode/host/M876.cpp +++ b/Marlin/src/gcode/host/M876.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../inc/MarlinConfig.h" #if ENABLED(HOST_PROMPT_SUPPORT) && DISABLED(EMERGENCY_PARSER) diff --git a/Marlin/src/gcode/lcd/M250.cpp b/Marlin/src/gcode/lcd/M250.cpp index 900ffe909b..083fb37f65 100644 --- a/Marlin/src/gcode/lcd/M250.cpp +++ b/Marlin/src/gcode/lcd/M250.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../inc/MarlinConfig.h" #if HAS_LCD_CONTRAST diff --git a/Marlin/src/gcode/motion/G6.cpp b/Marlin/src/gcode/motion/G6.cpp index 168dc28abd..a57a293e06 100644 --- a/Marlin/src/gcode/motion/G6.cpp +++ b/Marlin/src/gcode/motion/G6.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../inc/MarlinConfig.h" #if ENABLED(DIRECT_STEPPING) diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 9c1948157f..53b8783647 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -3279,10 +3279,6 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS /** * Check per-axis initializers for errors */ -constexpr float sanity_arr_1[] = DEFAULT_AXIS_STEPS_PER_UNIT, - sanity_arr_2[] = DEFAULT_MAX_FEEDRATE, - sanity_arr_3[] = DEFAULT_MAX_ACCELERATION, - sanity_arr_4[] = HOMING_FEEDRATE_MM_M; #define __PLUS_TEST(I,A) && (sanity_arr_##A[_MIN(I,signed(COUNT(sanity_arr_##A)-1))] > 0) #define _PLUS_TEST(A) (1 REPEAT2(14,__PLUS_TEST,A)) @@ -3292,18 +3288,22 @@ constexpr float sanity_arr_1[] = DEFAULT_AXIS_STEPS_PER_UNIT, #define _EXTRA_NOTE " (Should be " STRINGIFY(LINEAR_AXES) "+" STRINGIFY(E_STEPPERS) ")" #endif +constexpr float sanity_arr_1[] = DEFAULT_AXIS_STEPS_PER_UNIT; static_assert(COUNT(sanity_arr_1) >= LOGICAL_AXES, "DEFAULT_AXIS_STEPS_PER_UNIT requires " _LOGICAL_AXES_STR "elements."); static_assert(COUNT(sanity_arr_1) <= DISTINCT_AXES, "DEFAULT_AXIS_STEPS_PER_UNIT has too many elements." _EXTRA_NOTE); static_assert(_PLUS_TEST(1), "DEFAULT_AXIS_STEPS_PER_UNIT values must be positive."); +constexpr float sanity_arr_2[] = DEFAULT_MAX_FEEDRATE; static_assert(COUNT(sanity_arr_2) >= LOGICAL_AXES, "DEFAULT_MAX_FEEDRATE requires " _LOGICAL_AXES_STR "elements."); static_assert(COUNT(sanity_arr_2) <= DISTINCT_AXES, "DEFAULT_MAX_FEEDRATE has too many elements." _EXTRA_NOTE); static_assert(_PLUS_TEST(2), "DEFAULT_MAX_FEEDRATE values must be positive."); +constexpr float sanity_arr_3[] = DEFAULT_MAX_ACCELERATION; static_assert(COUNT(sanity_arr_3) >= LOGICAL_AXES, "DEFAULT_MAX_ACCELERATION requires " _LOGICAL_AXES_STR "elements."); static_assert(COUNT(sanity_arr_3) <= DISTINCT_AXES, "DEFAULT_MAX_ACCELERATION has too many elements." _EXTRA_NOTE); static_assert(_PLUS_TEST(3), "DEFAULT_MAX_ACCELERATION values must be positive."); +constexpr float sanity_arr_4[] = HOMING_FEEDRATE_MM_M; static_assert(COUNT(sanity_arr_4) == LINEAR_AXES, "HOMING_FEEDRATE_MM_M requires " _LINEAR_AXES_STR "elements (and no others)."); static_assert(_PLUS_TEST(4), "HOMING_FEEDRATE_MM_M values must be positive."); diff --git a/Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp b/Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp index 8aca19b0cd..19e3814a6f 100644 --- a/Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp +++ b/Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp @@ -1,3 +1,25 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + /** * @file lcdprint_hd44780.cpp * @brief LCD print api for HD44780 diff --git a/Marlin/src/lcd/dogm/fontdata/fontdata_ISO10646_1.h b/Marlin/src/lcd/dogm/fontdata/fontdata_ISO10646_1.h index 0a7ece8601..6f55d3bc3d 100644 --- a/Marlin/src/lcd/dogm/fontdata/fontdata_ISO10646_1.h +++ b/Marlin/src/lcd/dogm/fontdata/fontdata_ISO10646_1.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or @@ -16,6 +19,7 @@ * along with this program. If not, see . * */ + #include #if defined(__AVR__) && ENABLED(NOT_EXTENDED_ISO10646_1_5X7) diff --git a/Marlin/src/lcd/dogm/u8g_dev_ssd1309_12864.cpp b/Marlin/src/lcd/dogm/u8g_dev_ssd1309_12864.cpp index 2a21bd67ca..6d40ea0d4b 100644 --- a/Marlin/src/lcd/dogm/u8g_dev_ssd1309_12864.cpp +++ b/Marlin/src/lcd/dogm/u8g_dev_ssd1309_12864.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../inc/MarlinConfigPre.h" #if HAS_MARLINUI_U8GLIB diff --git a/Marlin/src/lcd/extui/anycubic_chiron/chiron_tft_defs.h b/Marlin/src/lcd/extui/anycubic_chiron/chiron_tft_defs.h index 70ac1490df..d9157fc4e6 100644 --- a/Marlin/src/lcd/extui/anycubic_chiron/chiron_tft_defs.h +++ b/Marlin/src/lcd/extui/anycubic_chiron/chiron_tft_defs.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once /** * lcd/extui/anycubic_chiron/chiron_defs.h @@ -28,7 +29,6 @@ * (not affiliated with Anycubic, Ltd.) */ -#pragma once #include "../../../inc/MarlinConfigPre.h" //#define ACDEBUGLEVEL 4 diff --git a/Marlin/src/lcd/extui/dgus_reloaded/DGUSRxHandler.h b/Marlin/src/lcd/extui/dgus_reloaded/DGUSRxHandler.h index d092d3a5b7..593b2e3bb8 100644 --- a/Marlin/src/lcd/extui/dgus_reloaded/DGUSRxHandler.h +++ b/Marlin/src/lcd/extui/dgus_reloaded/DGUSRxHandler.h @@ -19,7 +19,6 @@ * along with this program. If not, see . * */ - #pragma once #include "DGUSDisplay.h" diff --git a/Marlin/src/lcd/extui/dgus_reloaded/DGUSScreenHandler.h b/Marlin/src/lcd/extui/dgus_reloaded/DGUSScreenHandler.h index 056757fedf..402d8d3d38 100644 --- a/Marlin/src/lcd/extui/dgus_reloaded/DGUSScreenHandler.h +++ b/Marlin/src/lcd/extui/dgus_reloaded/DGUSScreenHandler.h @@ -19,7 +19,6 @@ * along with this program. If not, see . * */ - #pragma once #include "config/DGUS_Addr.h" diff --git a/Marlin/src/lcd/extui/dgus_reloaded/DGUSSetupHandler.h b/Marlin/src/lcd/extui/dgus_reloaded/DGUSSetupHandler.h index b1159ff708..20cd48c986 100644 --- a/Marlin/src/lcd/extui/dgus_reloaded/DGUSSetupHandler.h +++ b/Marlin/src/lcd/extui/dgus_reloaded/DGUSSetupHandler.h @@ -19,7 +19,6 @@ * along with this program. If not, see . * */ - #pragma once namespace DGUSSetupHandler { diff --git a/Marlin/src/lcd/extui/dgus_reloaded/DGUSTxHandler.h b/Marlin/src/lcd/extui/dgus_reloaded/DGUSTxHandler.h index 5715abbedf..a034b92ece 100644 --- a/Marlin/src/lcd/extui/dgus_reloaded/DGUSTxHandler.h +++ b/Marlin/src/lcd/extui/dgus_reloaded/DGUSTxHandler.h @@ -19,7 +19,6 @@ * along with this program. If not, see . * */ - #pragma once #include "DGUSDisplay.h" diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/ui_landscape.h b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/ui_landscape.h index 4faddc64b1..754f6e93e1 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/ui_landscape.h +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/ui_landscape.h @@ -21,7 +21,6 @@ * 0x0000 and 0xFFFE. A single 0xFFFF in the data stream indicates the * start of a new closed path. */ - #pragma once constexpr float x_min = 0.000000; diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/ui_portrait.h b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/ui_portrait.h index 50fc5ab9f8..e8b4281122 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/ui_portrait.h +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/ui_portrait.h @@ -21,7 +21,6 @@ * 0x0000 and 0xFFFE. A single 0xFFFF in the data stream indicates the * start of a new closed path. */ - #pragma once constexpr float x_min = 0.000000; diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/cocoa_press_ui.h b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/cocoa_press_ui.h index f67961830f..6a02228925 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/cocoa_press_ui.h +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/cocoa_press_ui.h @@ -21,7 +21,6 @@ * 0x0000 and 0xFFFE. A single 0xFFFF in the data stream indicates the * start of a new closed path. */ - #pragma once constexpr float x_min = 0.000000; diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/custom_user_menus.h b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/custom_user_menus.h index e46a280369..6935494809 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/custom_user_menus.h +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/custom_user_menus.h @@ -19,7 +19,6 @@ * along with this program. If not, see . * */ - #pragma once #define FTDI_CUSTOM_USER_MENUS diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/bootscreen_logo_portrait.h b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/bootscreen_logo_portrait.h index 5d9735892d..169a306afc 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/bootscreen_logo_portrait.h +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/bootscreen_logo_portrait.h @@ -20,7 +20,6 @@ * 0x0000 and 0xFFFE. A single 0xFFFF in the data stream indicates the * start of a new closed path. */ - #pragma once constexpr float x_min = 0.000000, x_max = 272.000000, diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/marlin_bootscreen_landscape.h b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/marlin_bootscreen_landscape.h index e023599a27..1231d31dc3 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/marlin_bootscreen_landscape.h +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/marlin_bootscreen_landscape.h @@ -21,7 +21,6 @@ * 0x0000 and 0xFFFE. A single 0xFFFF in the data stream indicates the * start of a new closed path. */ - #pragma once constexpr float x_min = 0.000000; diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/marlin_bootscreen_portrait.h b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/marlin_bootscreen_portrait.h index e3a30a6dfe..c6065af7f7 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/marlin_bootscreen_portrait.h +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/marlin_bootscreen_portrait.h @@ -21,7 +21,6 @@ * 0x0000 and 0xFFFE. A single 0xFFFF in the data stream indicates the * start of a new closed path. */ - #pragma once constexpr float x_min = 0.000000; diff --git a/Marlin/src/lcd/extui/mks_ui/draw_about.cpp b/Marlin/src/lcd/extui/mks_ui/draw_about.cpp index 54a8ede64e..3424bf7a0e 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_about.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_about.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_acceleration_settings.cpp b/Marlin/src/lcd/extui/mks_ui/draw_acceleration_settings.cpp index 22196a28b8..5de4a13c88 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_acceleration_settings.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_acceleration_settings.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_advance_settings.cpp b/Marlin/src/lcd/extui/mks_ui/draw_advance_settings.cpp index a564d86cc1..33fe9eb9cb 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_advance_settings.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_advance_settings.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_auto_level_offset_settings.cpp b/Marlin/src/lcd/extui/mks_ui/draw_auto_level_offset_settings.cpp index d52abcff23..5ac24c4413 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_auto_level_offset_settings.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_auto_level_offset_settings.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if BOTH(HAS_TFT_LVGL_UI, HAS_BED_PROBE) diff --git a/Marlin/src/lcd/extui/mks_ui/draw_baby_stepping.cpp b/Marlin/src/lcd/extui/mks_ui/draw_baby_stepping.cpp index 3165190579..428d43db7a 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_baby_stepping.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_baby_stepping.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_change_speed.cpp b/Marlin/src/lcd/extui/mks_ui/draw_change_speed.cpp index 645cd2e6e3..5248816f54 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_change_speed.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_change_speed.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_cloud_bind.cpp b/Marlin/src/lcd/extui/mks_ui/draw_cloud_bind.cpp index 56b0e8f5ca..1d0ae7775b 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_cloud_bind.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_cloud_bind.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if BOTH(HAS_TFT_LVGL_UI, MKS_WIFI_MODULE) diff --git a/Marlin/src/lcd/extui/mks_ui/draw_eeprom_settings.cpp b/Marlin/src/lcd/extui/mks_ui/draw_eeprom_settings.cpp index b96c65e547..c518d85ab5 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_eeprom_settings.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_eeprom_settings.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_encoder_settings.cpp b/Marlin/src/lcd/extui/mks_ui/draw_encoder_settings.cpp index 4c56205465..04c6b51e2a 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_encoder_settings.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_encoder_settings.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_error_message.cpp b/Marlin/src/lcd/extui/mks_ui/draw_error_message.cpp index 48ff56253b..6955e1803d 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_error_message.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_error_message.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_extrusion.cpp b/Marlin/src/lcd/extui/mks_ui/draw_extrusion.cpp index d1132a33d8..b18bd28339 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_extrusion.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_extrusion.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_fan.cpp b/Marlin/src/lcd/extui/mks_ui/draw_fan.cpp index ce804e615d..ab7a9a6001 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_fan.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_fan.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_filament_change.cpp b/Marlin/src/lcd/extui/mks_ui/draw_filament_change.cpp index 311894825d..0eaa35e49f 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_filament_change.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_filament_change.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_filament_settings.cpp b/Marlin/src/lcd/extui/mks_ui/draw_filament_settings.cpp index 97680f3a0c..e3ca75da51 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_filament_settings.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_filament_settings.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_gcode.cpp b/Marlin/src/lcd/extui/mks_ui/draw_gcode.cpp index bded5df7e7..13df99f954 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_gcode.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_gcode.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_home.cpp b/Marlin/src/lcd/extui/mks_ui/draw_home.cpp index 447fadd55d..8dba33756a 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_home.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_home.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_homing_sensitivity_settings.cpp b/Marlin/src/lcd/extui/mks_ui/draw_homing_sensitivity_settings.cpp index e1ab58ee7b..d022dc3036 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_homing_sensitivity_settings.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_homing_sensitivity_settings.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfig.h" #if HAS_TFT_LVGL_UI && USE_SENSORLESS diff --git a/Marlin/src/lcd/extui/mks_ui/draw_jerk_settings.cpp b/Marlin/src/lcd/extui/mks_ui/draw_jerk_settings.cpp index 8a97e30467..d410b2003c 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_jerk_settings.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_jerk_settings.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if BOTH(HAS_TFT_LVGL_UI, HAS_CLASSIC_JERK) diff --git a/Marlin/src/lcd/extui/mks_ui/draw_keyboard.cpp b/Marlin/src/lcd/extui/mks_ui/draw_keyboard.cpp index 671939cbff..b28159933f 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_keyboard.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_keyboard.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_language.cpp b/Marlin/src/lcd/extui/mks_ui/draw_language.cpp index 3db22583aa..3ef8c6a0ee 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_language.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_language.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_level_settings.cpp b/Marlin/src/lcd/extui/mks_ui/draw_level_settings.cpp index 8c8dec8913..6fc8704607 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_level_settings.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_level_settings.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_machine_para.cpp b/Marlin/src/lcd/extui/mks_ui/draw_machine_para.cpp index 890db3b5cd..57c32c733e 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_machine_para.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_machine_para.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_machine_settings.cpp b/Marlin/src/lcd/extui/mks_ui/draw_machine_settings.cpp index 3f43da992c..b14dc6b759 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_machine_settings.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_machine_settings.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_manuaLevel.cpp b/Marlin/src/lcd/extui/mks_ui/draw_manuaLevel.cpp index b927b99b76..60724aa4f3 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_manuaLevel.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_manuaLevel.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_max_feedrate_settings.cpp b/Marlin/src/lcd/extui/mks_ui/draw_max_feedrate_settings.cpp index 2cccf899b4..1dd6a93d62 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_max_feedrate_settings.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_max_feedrate_settings.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_more.cpp b/Marlin/src/lcd/extui/mks_ui/draw_more.cpp index e89e2f3e8a..6c5fa2fa3d 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_more.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_more.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_motor_settings.cpp b/Marlin/src/lcd/extui/mks_ui/draw_motor_settings.cpp index b86370e35a..7367cec1c2 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_motor_settings.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_motor_settings.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_move_motor.cpp b/Marlin/src/lcd/extui/mks_ui/draw_move_motor.cpp index 7a37dc6a15..baa8d48da3 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_move_motor.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_move_motor.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_number_key.cpp b/Marlin/src/lcd/extui/mks_ui/draw_number_key.cpp index ae770a8925..a3cb7f6c1c 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_number_key.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_number_key.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_operation.cpp b/Marlin/src/lcd/extui/mks_ui/draw_operation.cpp index 9b87df1fdf..8be74c6b9a 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_operation.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_operation.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_pause_message.cpp b/Marlin/src/lcd/extui/mks_ui/draw_pause_message.cpp index 485e010251..e5f6a5963a 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_pause_message.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_pause_message.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if BOTH(HAS_TFT_LVGL_UI, ADVANCED_PAUSE_FEATURE) diff --git a/Marlin/src/lcd/extui/mks_ui/draw_pause_position.cpp b/Marlin/src/lcd/extui/mks_ui/draw_pause_position.cpp index 771a98c11f..8e107d4cee 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_pause_position.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_pause_position.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_preHeat.cpp b/Marlin/src/lcd/extui/mks_ui/draw_preHeat.cpp index 54f0917774..3489578fe9 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_preHeat.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_preHeat.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_print_file.cpp b/Marlin/src/lcd/extui/mks_ui/draw_print_file.cpp index 5e1dfae5d1..ebad708597 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_print_file.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_print_file.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_printing.cpp b/Marlin/src/lcd/extui/mks_ui/draw_printing.cpp index e3915adeb0..e58c098fbb 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_printing.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_printing.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_ready_print.cpp b/Marlin/src/lcd/extui/mks_ui/draw_ready_print.cpp index d324d8d7be..ce0091d8dd 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_ready_print.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_ready_print.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_set.cpp b/Marlin/src/lcd/extui/mks_ui/draw_set.cpp index a765d0e58a..2dd3a9dfd9 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_set.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_set.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_step_settings.cpp b/Marlin/src/lcd/extui/mks_ui/draw_step_settings.cpp index d4ab028eec..fc920728b4 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_step_settings.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_step_settings.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_tmc_current_settings.cpp b/Marlin/src/lcd/extui/mks_ui/draw_tmc_current_settings.cpp index 5117bd4802..60a3562b9d 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_tmc_current_settings.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_tmc_current_settings.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if BOTH(HAS_TFT_LVGL_UI, HAS_TRINAMIC_CONFIG) diff --git a/Marlin/src/lcd/extui/mks_ui/draw_tmc_step_mode_settings.cpp b/Marlin/src/lcd/extui/mks_ui/draw_tmc_step_mode_settings.cpp index bf1b9c3459..cdac150453 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_tmc_step_mode_settings.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_tmc_step_mode_settings.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if BOTH(HAS_TFT_LVGL_UI, HAS_STEALTHCHOP) diff --git a/Marlin/src/lcd/extui/mks_ui/draw_tool.cpp b/Marlin/src/lcd/extui/mks_ui/draw_tool.cpp index 8b9747972d..4cc99d7184 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_tool.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_tool.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_touch_calibration.cpp b/Marlin/src/lcd/extui/mks_ui/draw_touch_calibration.cpp index e10a07c6de..5bd11e59ec 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_touch_calibration.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_touch_calibration.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if BOTH(HAS_TFT_LVGL_UI, TOUCH_SCREEN_CALIBRATION) diff --git a/Marlin/src/lcd/extui/mks_ui/draw_tramming_pos_settings.cpp b/Marlin/src/lcd/extui/mks_ui/draw_tramming_pos_settings.cpp index c4a21542e2..d6e52606c0 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_tramming_pos_settings.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_tramming_pos_settings.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_ui.cpp b/Marlin/src/lcd/extui/mks_ui/draw_ui.cpp index 68430fe517..26906ffced 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_ui.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_ui.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_wifi.cpp b/Marlin/src/lcd/extui/mks_ui/draw_wifi.cpp index 34b2abd094..5073b6b4e5 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_wifi.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_wifi.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_wifi_list.cpp b/Marlin/src/lcd/extui/mks_ui/draw_wifi_list.cpp index 2c3957fe9c..6283b1dc58 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_wifi_list.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_wifi_list.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_wifi_settings.cpp b/Marlin/src/lcd/extui/mks_ui/draw_wifi_settings.cpp index 8509cc3ac1..e087f74286 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_wifi_settings.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_wifi_settings.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/draw_wifi_tips.cpp b/Marlin/src/lcd/extui/mks_ui/draw_wifi_tips.cpp index c337d18922..f2fc7b1199 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_wifi_tips.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_wifi_tips.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/gb2312_puhui16.cpp b/Marlin/src/lcd/extui/mks_ui/gb2312_puhui16.cpp index b1f0e0e1bb..672783f656 100644 --- a/Marlin/src/lcd/extui/mks_ui/gb2312_puhui16.cpp +++ b/Marlin/src/lcd/extui/mks_ui/gb2312_puhui16.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/mks_hardware.cpp b/Marlin/src/lcd/extui/mks_ui/mks_hardware.cpp index 5cd1a4c525..1347f77f9a 100644 --- a/Marlin/src/lcd/extui/mks_ui/mks_hardware.cpp +++ b/Marlin/src/lcd/extui/mks_ui/mks_hardware.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/pic_manager.cpp b/Marlin/src/lcd/extui/mks_ui/pic_manager.cpp index 624626a322..2e24d6a2c0 100644 --- a/Marlin/src/lcd/extui/mks_ui/pic_manager.cpp +++ b/Marlin/src/lcd/extui/mks_ui/pic_manager.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/printer_operation.cpp b/Marlin/src/lcd/extui/mks_ui/printer_operation.cpp index 362fdeb43d..3ca5d30e64 100644 --- a/Marlin/src/lcd/extui/mks_ui/printer_operation.cpp +++ b/Marlin/src/lcd/extui/mks_ui/printer_operation.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/tft_lvgl_configuration.cpp b/Marlin/src/lcd/extui/mks_ui/tft_lvgl_configuration.cpp index 79990ea42a..1cac49ffda 100644 --- a/Marlin/src/lcd/extui/mks_ui/tft_lvgl_configuration.cpp +++ b/Marlin/src/lcd/extui/mks_ui/tft_lvgl_configuration.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/tft_multi_language.cpp b/Marlin/src/lcd/extui/mks_ui/tft_multi_language.cpp index 0771a31cb4..c69ccf6587 100644 --- a/Marlin/src/lcd/extui/mks_ui/tft_multi_language.cpp +++ b/Marlin/src/lcd/extui/mks_ui/tft_multi_language.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if HAS_TFT_LVGL_UI diff --git a/Marlin/src/lcd/extui/mks_ui/wifi_module.cpp b/Marlin/src/lcd/extui/mks_ui/wifi_module.cpp index 998393ebd5..70173691b0 100644 --- a/Marlin/src/lcd/extui/mks_ui/wifi_module.cpp +++ b/Marlin/src/lcd/extui/mks_ui/wifi_module.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if BOTH(HAS_TFT_LVGL_UI, MKS_WIFI_MODULE) diff --git a/Marlin/src/lcd/extui/mks_ui/wifi_upload.cpp b/Marlin/src/lcd/extui/mks_ui/wifi_upload.cpp index 4a5f08edaa..ff61315070 100644 --- a/Marlin/src/lcd/extui/mks_ui/wifi_upload.cpp +++ b/Marlin/src/lcd/extui/mks_ui/wifi_upload.cpp @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ + #include "../../../inc/MarlinConfigPre.h" #if BOTH(HAS_TFT_LVGL_UI, MKS_WIFI_MODULE) diff --git a/Marlin/src/lcd/fontutils.cpp b/Marlin/src/lcd/fontutils.cpp index 90fcb2ae7c..50b671ea33 100644 --- a/Marlin/src/lcd/fontutils.cpp +++ b/Marlin/src/lcd/fontutils.cpp @@ -1,3 +1,25 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + /** * @file fontutils.cpp * @brief help functions for font and char diff --git a/Marlin/src/lcd/fontutils.h b/Marlin/src/lcd/fontutils.h index 04ff81148f..3901d4439f 100644 --- a/Marlin/src/lcd/fontutils.h +++ b/Marlin/src/lcd/fontutils.h @@ -1,3 +1,25 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + /** * @file fontutils.h * @brief help functions for font and char diff --git a/Marlin/src/lcd/tft_io/touch_calibration.cpp b/Marlin/src/lcd/tft_io/touch_calibration.cpp index 1c3b8b35fc..44ebc73d71 100644 --- a/Marlin/src/lcd/tft_io/touch_calibration.cpp +++ b/Marlin/src/lcd/tft_io/touch_calibration.cpp @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/lcd/tft_io/touch_calibration.h b/Marlin/src/lcd/tft_io/touch_calibration.h index 112fbdca30..abd5667700 100644 --- a/Marlin/src/lcd/tft_io/touch_calibration.h +++ b/Marlin/src/lcd/tft_io/touch_calibration.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/lcd/touch/touch_buttons.cpp b/Marlin/src/lcd/touch/touch_buttons.cpp index 2d6158961e..9d9d6efeb2 100644 --- a/Marlin/src/lcd/touch/touch_buttons.cpp +++ b/Marlin/src/lcd/touch/touch_buttons.cpp @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/lcd/touch/touch_buttons.h b/Marlin/src/lcd/touch/touch_buttons.h index 36be0ee134..39768f2594 100644 --- a/Marlin/src/lcd/touch/touch_buttons.h +++ b/Marlin/src/lcd/touch/touch_buttons.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/libs/BL24CXX.cpp b/Marlin/src/libs/BL24CXX.cpp index adcd5ed894..6407fac670 100644 --- a/Marlin/src/libs/BL24CXX.cpp +++ b/Marlin/src/libs/BL24CXX.cpp @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/module/thermistor/thermistor_99.h b/Marlin/src/module/thermistor/thermistor_99.h index f813abae69..fa3dae93af 100644 --- a/Marlin/src/module/thermistor/thermistor_99.h +++ b/Marlin/src/module/thermistor/thermistor_99.h @@ -19,7 +19,6 @@ * along with this program. If not, see . * */ - #pragma once // 100k bed thermistor with a 10K pull-up resistor - made by $ buildroot/share/scripts/createTemperatureLookupMarlin.py --rp=10000 diff --git a/Marlin/src/pins/pinsDebug.h b/Marlin/src/pins/pinsDebug.h index e29067268d..b384342335 100644 --- a/Marlin/src/pins/pinsDebug.h +++ b/Marlin/src/pins/pinsDebug.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or @@ -41,7 +44,7 @@ #define REPORT_NAME_ANALOG(COUNTER, NAME) _ADD_PIN(#NAME, COUNTER) #include "pinsDebug_list.h" -#line 45 +#line 48 // manually add pins that have names that are macros which don't play well with these macros #if ANY(AVR_ATmega2560_FAMILY, AVR_ATmega1284_FAMILY, ARDUINO_ARCH_SAM, TARGET_LPC1768) @@ -160,7 +163,7 @@ const PinInfo pin_array[] PROGMEM = { #endif #include "pinsDebug_list.h" - #line 164 + #line 167 }; diff --git a/Marlin/src/pins/pinsDebug_list.h b/Marlin/src/pins/pinsDebug_list.h index 501ae921c2..fe670cca29 100644 --- a/Marlin/src/pins/pinsDebug_list.h +++ b/Marlin/src/pins/pinsDebug_list.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or @@ -22,15 +25,13 @@ // Following this pattern is a must. // If the new pin name is over 28 characters long then pinsDebug.h will need to be modified. -// Pin lists 1.1.x and 2.0.x synchronized 2018-02-17 - #if TARGET_LPC1768 #define ANALOG_OK(PN) ((PN) == P0_02 || (PN) == P0_03 || (PN) == P0_23 || (PN) == P0_24 || (PN) == P0_25 || (PN) == P0_26 || (PN) == P1_30 || (PN) == P1_31) #else #define ANALOG_OK(PN) ((PN) >= 0 && (PN) < NUM_ANALOG_INPUTS) #endif -#line 34 // set __LINE__ to a known value for both passes +#line 35 // set __LINE__ to a known value for both passes // // Analog Pin Assignments diff --git a/Marlin/src/pins/sanguino/pins_MELZI_V2.h b/Marlin/src/pins/sanguino/pins_MELZI_V2.h index badf53a641..c3133432e0 100644 --- a/Marlin/src/pins/sanguino/pins_MELZI_V2.h +++ b/Marlin/src/pins/sanguino/pins_MELZI_V2.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/pins/stm32f0/pins_MALYAN_M200_V2.h b/Marlin/src/pins/stm32f0/pins_MALYAN_M200_V2.h index abdd088f9b..178c873af7 100644 --- a/Marlin/src/pins/stm32f0/pins_MALYAN_M200_V2.h +++ b/Marlin/src/pins/stm32f0/pins_MALYAN_M200_V2.h @@ -19,7 +19,6 @@ * along with this program. If not, see . * */ - #pragma once #if NOT_TARGET(STM32F0xx) diff --git a/Marlin/src/pins/stm32f0/pins_MALYAN_M300.h b/Marlin/src/pins/stm32f0/pins_MALYAN_M300.h index 2717439f24..299b9ff49c 100644 --- a/Marlin/src/pins/stm32f0/pins_MALYAN_M300.h +++ b/Marlin/src/pins/stm32f0/pins_MALYAN_M300.h @@ -19,7 +19,6 @@ * along with this program. If not, see . * */ - #pragma once #if NOT_TARGET(__STM32F1__, STM32F1xx, STM32F0xx) diff --git a/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h b/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h index c9d16b16b0..b25badca56 100644 --- a/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h +++ b/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/pins/stm32f4/pins_ANET_ET4.h b/Marlin/src/pins/stm32f4/pins_ANET_ET4.h index d2ee2e013c..196a779c8d 100644 --- a/Marlin/src/pins/stm32f4/pins_ANET_ET4.h +++ b/Marlin/src/pins/stm32f4/pins_ANET_ET4.h @@ -19,7 +19,6 @@ * along with this program. If not, see . * */ - #pragma once #include "env_validate.h" diff --git a/Marlin/src/pins/stm32f4/pins_ANET_ET4P.h b/Marlin/src/pins/stm32f4/pins_ANET_ET4P.h index f5ebf82a48..bad5b8f718 100644 --- a/Marlin/src/pins/stm32f4/pins_ANET_ET4P.h +++ b/Marlin/src/pins/stm32f4/pins_ANET_ET4P.h @@ -19,7 +19,6 @@ * along with this program. If not, see . * */ - #pragma once #define BOARD_INFO_NAME "Anet ET4P 1.x" diff --git a/Marlin/src/pins/stm32f4/pins_LERDGE_K.h b/Marlin/src/pins/stm32f4/pins_LERDGE_K.h index 3cfa3cd3e5..6ad3849d11 100644 --- a/Marlin/src/pins/stm32f4/pins_LERDGE_K.h +++ b/Marlin/src/pins/stm32f4/pins_LERDGE_K.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/pins/stm32f4/pins_LERDGE_S.h b/Marlin/src/pins/stm32f4/pins_LERDGE_S.h index 2d5a45eee0..68e5636955 100644 --- a/Marlin/src/pins/stm32f4/pins_LERDGE_S.h +++ b/Marlin/src/pins/stm32f4/pins_LERDGE_S.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/pins/stm32f4/pins_LERDGE_X.h b/Marlin/src/pins/stm32f4/pins_LERDGE_X.h index f65476c0b7..12e47e35cc 100644 --- a/Marlin/src/pins/stm32f4/pins_LERDGE_X.h +++ b/Marlin/src/pins/stm32f4/pins_LERDGE_X.h @@ -2,6 +2,9 @@ * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or diff --git a/Marlin/src/pins/stm32f4/pins_RUMBA32_BTT.h b/Marlin/src/pins/stm32f4/pins_RUMBA32_BTT.h index b12f4737b7..04dcc432ca 100644 --- a/Marlin/src/pins/stm32f4/pins_RUMBA32_BTT.h +++ b/Marlin/src/pins/stm32f4/pins_RUMBA32_BTT.h @@ -19,14 +19,13 @@ * along with this program. If not, see . * */ +#pragma once /** * No offical schematics have been found. * But these differences where noted in https://github.com/bigtreetech/Rumba32/issues/1 */ -#pragma once - #define BOARD_INFO_NAME "RUMBA32 (BTT)" #if NO_EEPROM_SELECTED diff --git a/Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h b/Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h index 5f8ffe975b..7ccb57e238 100644 --- a/Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h +++ b/Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h @@ -19,6 +19,7 @@ * along with this program. If not, see . * */ +#pragma once // Source: https://github.com/stm32duino/Arduino_Core_STM32/blob/master/variants/ST3DP001_EVAL/variant.cpp @@ -38,8 +39,6 @@ * C Runtime Library: "newlib Nano (default)" */ -#pragma once - #include "env_validate.h" #ifndef MACHINE_NAME diff --git a/buildroot/share/PlatformIO/variants/MARLIN_FLY_F407ZG/variant.h b/buildroot/share/PlatformIO/variants/MARLIN_FLY_F407ZG/variant.h index ae973c89c5..6fb271dea6 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_FLY_F407ZG/variant.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_FLY_F407ZG/variant.h @@ -27,7 +27,6 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ - #pragma once #ifdef __cplusplus diff --git a/buildroot/share/PlatformIO/variants/MARLIN_LERDGE/variant.h b/buildroot/share/PlatformIO/variants/MARLIN_LERDGE/variant.h index f4488356b7..d82f000655 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_LERDGE/variant.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_LERDGE/variant.h @@ -27,7 +27,6 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ - #pragma once #ifdef __cplusplus diff --git a/buildroot/share/fonts/genallfont.sh b/buildroot/share/fonts/genallfont.sh index d5cad54361..bffe715b9d 100755 --- a/buildroot/share/fonts/genallfont.sh +++ b/buildroot/share/fonts/genallfont.sh @@ -105,6 +105,9 @@ if [ 1 = 1 ]; then * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or @@ -119,6 +122,7 @@ if [ 1 = 1 ]; then * along with this program. If not, see . * */ + #include #if defined(__AVR__) && ENABLED(NOT_EXTENDED_ISO10646_1_5X7)