Fix missing BOARD_K8800 (#19331)
This commit is contained in:
riodoro1
GitHub
parent
b2ba9009d0
commit
abf1222f1d
106
Marlin/Makefile
106
Marlin/Makefile
|
|
@ -170,112 +170,114 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1100)
|
|||
else ifeq ($(HARDWARE_MOTHERBOARD),1101)
|
||||
# Velleman K8400 Controller (derived from 3Drag Controller)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1102)
|
||||
# Velleman K8600 Controller (derived from 3Drag Controller)
|
||||
# Velleman K8600 Controller (Vertex Nano)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1103)
|
||||
# 2PrintBeta BAM&DICE with STK drivers
|
||||
# Velleman K8800 Controller (Vertex Delta)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1104)
|
||||
# 2PrintBeta BAM&DICE Due with STK drivers
|
||||
# 2PrintBeta BAM&DICE with STK drivers
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1105)
|
||||
# MKS BASE v1.0
|
||||
# 2PrintBeta BAM&DICE Due with STK drivers
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1106)
|
||||
# MKS v1.4 with A4982 stepper drivers
|
||||
# MKS BASE v1.0
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1107)
|
||||
# MKS v1.5 with Allegro A4982 stepper drivers
|
||||
# MKS v1.4 with A4982 stepper drivers
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1108)
|
||||
# MKS v1.6 with Allegro A4982 stepper drivers
|
||||
# MKS v1.5 with Allegro A4982 stepper drivers
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1109)
|
||||
# MKS BASE 1.0 with Heroic HR4982 stepper drivers
|
||||
# MKS v1.6 with Allegro A4982 stepper drivers
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1110)
|
||||
# MKS GEN v1.3 or 1.4
|
||||
# MKS BASE 1.0 with Heroic HR4982 stepper drivers
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1111)
|
||||
# MKS GEN L
|
||||
# MKS GEN v1.3 or 1.4
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1112)
|
||||
# zrib V2.0 control board (Chinese knock off RAMPS replica)
|
||||
# MKS GEN L
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1113)
|
||||
# BigTreeTech or BIQU KFB2.0
|
||||
# zrib V2.0 control board (Chinese knock off RAMPS replica)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1114)
|
||||
# Felix 2.0+ Electronics Board (RAMPS like)
|
||||
# BigTreeTech or BIQU KFB2.0
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1115)
|
||||
# Invent-A-Part RigidBoard
|
||||
# Felix 2.0+ Electronics Board (RAMPS like)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1116)
|
||||
# Invent-A-Part RigidBoard V2
|
||||
# Invent-A-Part RigidBoard
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1117)
|
||||
# Sainsmart 2-in-1 board
|
||||
# Invent-A-Part RigidBoard V2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1118)
|
||||
# Ultimaker
|
||||
# Sainsmart 2-in-1 board
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1119)
|
||||
# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
||||
# Ultimaker
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1120)
|
||||
# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1121)
|
||||
MCU ?= atmega1280
|
||||
|
||||
# Azteeg X3
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1121)
|
||||
# Azteeg X3 Pro
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1122)
|
||||
# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
|
||||
# Azteeg X3 Pro
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1123)
|
||||
# Rumba
|
||||
# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1124)
|
||||
# Raise3D Rumba
|
||||
# Rumba
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1125)
|
||||
# Rapide Lite RL200 Rumba
|
||||
# Raise3D Rumba
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1126)
|
||||
# Formbot T-Rex 2 Plus
|
||||
# Rapide Lite RL200 Rumba
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1127)
|
||||
# Formbot T-Rex 3
|
||||
# Formbot T-Rex 2 Plus
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1128)
|
||||
# Formbot Raptor
|
||||
# Formbot T-Rex 3
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1129)
|
||||
# Formbot Raptor 2
|
||||
# Formbot Raptor
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1130)
|
||||
# bq ZUM Mega 3D
|
||||
# Formbot Raptor 2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1131)
|
||||
# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
|
||||
# bq ZUM Mega 3D
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1132)
|
||||
# TriGorilla Anycubic version 1.3 based on RAMPS EFB
|
||||
# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1133)
|
||||
# TriGorilla Anycubic version 1.4 based on RAMPS EFB
|
||||
# TriGorilla Anycubic version 1.3 based on RAMPS EFB
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1134)
|
||||
# TriGorilla Anycubic version 1.4 Rev 1.1
|
||||
# TriGorilla Anycubic version 1.4 based on RAMPS EFB
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1135)
|
||||
# Creality: Ender-4, CR-8
|
||||
# TriGorilla Anycubic version 1.4 Rev 1.1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1136)
|
||||
# Creality: CR10S, CR20, CR-X
|
||||
# Creality: Ender-4, CR-8
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1137)
|
||||
# Dagoma F5
|
||||
# Creality: CR10S, CR20, CR-X
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1138)
|
||||
# FYSETC F6 1.3
|
||||
# Dagoma F5
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1139)
|
||||
# FYSETC F6 1.5
|
||||
# FYSETC F6 1.3
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1140)
|
||||
# Duplicator i3 Plus
|
||||
# FYSETC F6 1.5
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1141)
|
||||
# VORON
|
||||
# Duplicator i3 Plus
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1142)
|
||||
# TRONXY V3 1.0
|
||||
# VORON
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1143)
|
||||
# Z-Bolt X Series
|
||||
# TRONXY V3 1.0
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1144)
|
||||
# TT OSCAR
|
||||
# Z-Bolt X Series
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1145)
|
||||
# Overlord/Overlord Pro
|
||||
# TT OSCAR
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1146)
|
||||
# ADIMLab Gantry v1
|
||||
# Overlord/Overlord Pro
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1147)
|
||||
# ADIMLab Gantry v2
|
||||
# ADIMLab Gantry v1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1148)
|
||||
# BIQU Tango V1
|
||||
# ADIMLab Gantry v2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1149)
|
||||
# MKS GEN L V2
|
||||
# BIQU Tango V1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1150)
|
||||
# MKS GEN L V2.1
|
||||
# MKS GEN L V2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1151)
|
||||
# Copymaster 3D
|
||||
# MKS GEN L V2.1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1152)
|
||||
# Ortur 4
|
||||
# Copymaster 3D
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1153)
|
||||
# Tenlog D3 Hero
|
||||
# Ortur 4
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1154)
|
||||
# Tenlog D3 Hero
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1155)
|
||||
|
||||
#
|
||||
# RAMBo and derivatives
|
||||
|
|
|
|||
|
|
@ -57,57 +57,58 @@
|
|||
#define BOARD_K8200 1101 // Velleman K8200 Controller (derived from 3Drag Controller)
|
||||
#define BOARD_K8400 1102 // Velleman K8400 Controller (derived from 3Drag Controller)
|
||||
#define BOARD_K8600 1103 // Velleman K8600 Controller (Vertex Nano)
|
||||
#define BOARD_BAM_DICE 1104 // 2PrintBeta BAM&DICE with STK drivers
|
||||
#define BOARD_BAM_DICE_DUE 1105 // 2PrintBeta BAM&DICE Due with STK drivers
|
||||
#define BOARD_MKS_BASE 1106 // MKS BASE v1.0
|
||||
#define BOARD_MKS_BASE_14 1107 // MKS BASE v1.4 with Allegro A4982 stepper drivers
|
||||
#define BOARD_MKS_BASE_15 1108 // MKS BASE v1.5 with Allegro A4982 stepper drivers
|
||||
#define BOARD_MKS_BASE_16 1109 // MKS BASE v1.6 with Allegro A4982 stepper drivers
|
||||
#define BOARD_MKS_BASE_HEROIC 1110 // MKS BASE 1.0 with Heroic HR4982 stepper drivers
|
||||
#define BOARD_MKS_GEN_13 1111 // MKS GEN v1.3 or 1.4
|
||||
#define BOARD_MKS_GEN_L 1112 // MKS GEN L
|
||||
#define BOARD_KFB_2 1113 // BigTreeTech or BIQU KFB2.0
|
||||
#define BOARD_ZRIB_V20 1114 // zrib V2.0 control board (Chinese knock off RAMPS replica)
|
||||
#define BOARD_FELIX2 1115 // Felix 2.0+ Electronics Board (RAMPS like)
|
||||
#define BOARD_RIGIDBOARD 1116 // Invent-A-Part RigidBoard
|
||||
#define BOARD_RIGIDBOARD_V2 1117 // Invent-A-Part RigidBoard V2
|
||||
#define BOARD_SAINSMART_2IN1 1118 // Sainsmart 2-in-1 board
|
||||
#define BOARD_ULTIMAKER 1119 // Ultimaker
|
||||
#define BOARD_ULTIMAKER_OLD 1120 // Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
||||
#define BOARD_AZTEEG_X3 1121 // Azteeg X3
|
||||
#define BOARD_AZTEEG_X3_PRO 1122 // Azteeg X3 Pro
|
||||
#define BOARD_ULTIMAIN_2 1123 // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
|
||||
#define BOARD_RUMBA 1124 // Rumba
|
||||
#define BOARD_RUMBA_RAISE3D 1125 // Raise3D N series Rumba derivative
|
||||
#define BOARD_RL200 1126 // Rapide Lite 200 (v1, low-cost RUMBA clone with drv)
|
||||
#define BOARD_FORMBOT_TREX2PLUS 1127 // Formbot T-Rex 2 Plus
|
||||
#define BOARD_FORMBOT_TREX3 1128 // Formbot T-Rex 3
|
||||
#define BOARD_FORMBOT_RAPTOR 1129 // Formbot Raptor
|
||||
#define BOARD_FORMBOT_RAPTOR2 1130 // Formbot Raptor 2
|
||||
#define BOARD_BQ_ZUM_MEGA_3D 1131 // bq ZUM Mega 3D
|
||||
#define BOARD_MAKEBOARD_MINI 1132 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
|
||||
#define BOARD_TRIGORILLA_13 1133 // TriGorilla Anycubic version 1.3-based on RAMPS EFB
|
||||
#define BOARD_TRIGORILLA_14 1134 // ... Ver 1.4
|
||||
#define BOARD_TRIGORILLA_14_11 1135 // ... Rev 1.1 (new servo pin order)
|
||||
#define BOARD_RAMPS_ENDER_4 1136 // Creality: Ender-4, CR-8
|
||||
#define BOARD_RAMPS_CREALITY 1137 // Creality: CR10S, CR20, CR-X
|
||||
#define BOARD_RAMPS_DAGOMA 1138 // Dagoma F5
|
||||
#define BOARD_FYSETC_F6_13 1139 // FYSETC F6 1.3
|
||||
#define BOARD_FYSETC_F6_14 1140 // FYSETC F6 1.4
|
||||
#define BOARD_DUPLICATOR_I3_PLUS 1141 // Wanhao Duplicator i3 Plus
|
||||
#define BOARD_VORON 1142 // VORON Design
|
||||
#define BOARD_TRONXY_V3_1_0 1143 // Tronxy TRONXY-V3-1.0
|
||||
#define BOARD_Z_BOLT_X_SERIES 1144 // Z-Bolt X Series
|
||||
#define BOARD_TT_OSCAR 1145 // TT OSCAR
|
||||
#define BOARD_OVERLORD 1146 // Overlord/Overlord Pro
|
||||
#define BOARD_HJC2560C_REV1 1147 // ADIMLab Gantry v1
|
||||
#define BOARD_HJC2560C_REV2 1148 // ADIMLab Gantry v2
|
||||
#define BOARD_TANGO 1149 // BIQU Tango V1
|
||||
#define BOARD_MKS_GEN_L_V2 1150 // MKS GEN L V2
|
||||
#define BOARD_MKS_GEN_L_V21 1151 // MKS GEN L V2.1
|
||||
#define BOARD_COPYMASTER_3D 1152 // Copymaster 3D
|
||||
#define BOARD_ORTUR_4 1153 // Ortur 4
|
||||
#define BOARD_TENLOG_D3_HERO 1154 // Tenlog D3 Hero IDEX printer
|
||||
#define BOARD_K8800 1104 // Velleman K8800 Controller (Vertex Delta)
|
||||
#define BOARD_BAM_DICE 1105 // 2PrintBeta BAM&DICE with STK drivers
|
||||
#define BOARD_BAM_DICE_DUE 1106 // 2PrintBeta BAM&DICE Due with STK drivers
|
||||
#define BOARD_MKS_BASE 1107 // MKS BASE v1.0
|
||||
#define BOARD_MKS_BASE_14 1108 // MKS BASE v1.4 with Allegro A4982 stepper drivers
|
||||
#define BOARD_MKS_BASE_15 1109 // MKS BASE v1.5 with Allegro A4982 stepper drivers
|
||||
#define BOARD_MKS_BASE_16 1110 // MKS BASE v1.6 with Allegro A4982 stepper drivers
|
||||
#define BOARD_MKS_BASE_HEROIC 1111 // MKS BASE 1.0 with Heroic HR4982 stepper drivers
|
||||
#define BOARD_MKS_GEN_13 1112 // MKS GEN v1.3 or 1.4
|
||||
#define BOARD_MKS_GEN_L 1113 // MKS GEN L
|
||||
#define BOARD_KFB_2 1114 // BigTreeTech or BIQU KFB2.0
|
||||
#define BOARD_ZRIB_V20 1115 // zrib V2.0 control board (Chinese knock off RAMPS replica)
|
||||
#define BOARD_FELIX2 1116 // Felix 2.0+ Electronics Board (RAMPS like)
|
||||
#define BOARD_RIGIDBOARD 1117 // Invent-A-Part RigidBoard
|
||||
#define BOARD_RIGIDBOARD_V2 1118 // Invent-A-Part RigidBoard V2
|
||||
#define BOARD_SAINSMART_2IN1 1119 // Sainsmart 2-in-1 board
|
||||
#define BOARD_ULTIMAKER 1120 // Ultimaker
|
||||
#define BOARD_ULTIMAKER_OLD 1121 // Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
||||
#define BOARD_AZTEEG_X3 1122 // Azteeg X3
|
||||
#define BOARD_AZTEEG_X3_PRO 1123 // Azteeg X3 Pro
|
||||
#define BOARD_ULTIMAIN_2 1124 // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
|
||||
#define BOARD_RUMBA 1125 // Rumba
|
||||
#define BOARD_RUMBA_RAISE3D 1126 // Raise3D N series Rumba derivative
|
||||
#define BOARD_RL200 1127 // Rapide Lite 200 (v1, low-cost RUMBA clone with drv)
|
||||
#define BOARD_FORMBOT_TREX2PLUS 1128 // Formbot T-Rex 2 Plus
|
||||
#define BOARD_FORMBOT_TREX3 1129 // Formbot T-Rex 3
|
||||
#define BOARD_FORMBOT_RAPTOR 1130 // Formbot Raptor
|
||||
#define BOARD_FORMBOT_RAPTOR2 1131 // Formbot Raptor 2
|
||||
#define BOARD_BQ_ZUM_MEGA_3D 1132 // bq ZUM Mega 3D
|
||||
#define BOARD_MAKEBOARD_MINI 1133 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
|
||||
#define BOARD_TRIGORILLA_13 1134 // TriGorilla Anycubic version 1.3-based on RAMPS EFB
|
||||
#define BOARD_TRIGORILLA_14 1135 // ... Ver 1.4
|
||||
#define BOARD_TRIGORILLA_14_11 1136 // ... Rev 1.1 (new servo pin order)
|
||||
#define BOARD_RAMPS_ENDER_4 1137 // Creality: Ender-4, CR-8
|
||||
#define BOARD_RAMPS_CREALITY 1138 // Creality: CR10S, CR20, CR-X
|
||||
#define BOARD_RAMPS_DAGOMA 1139 // Dagoma F5
|
||||
#define BOARD_FYSETC_F6_13 1140 // FYSETC F6 1.3
|
||||
#define BOARD_FYSETC_F6_14 1141 // FYSETC F6 1.4
|
||||
#define BOARD_DUPLICATOR_I3_PLUS 1142 // Wanhao Duplicator i3 Plus
|
||||
#define BOARD_VORON 1143 // VORON Design
|
||||
#define BOARD_TRONXY_V3_1_0 1144 // Tronxy TRONXY-V3-1.0
|
||||
#define BOARD_Z_BOLT_X_SERIES 1145 // Z-Bolt X Series
|
||||
#define BOARD_TT_OSCAR 1146 // TT OSCAR
|
||||
#define BOARD_OVERLORD 1147 // Overlord/Overlord Pro
|
||||
#define BOARD_HJC2560C_REV1 1148 // ADIMLab Gantry v1
|
||||
#define BOARD_HJC2560C_REV2 1149 // ADIMLab Gantry v2
|
||||
#define BOARD_TANGO 1150 // BIQU Tango V1
|
||||
#define BOARD_MKS_GEN_L_V2 1151 // MKS GEN L V2
|
||||
#define BOARD_MKS_GEN_L_V21 1152 // MKS GEN L V2.1
|
||||
#define BOARD_COPYMASTER_3D 1153 // Copymaster 3D
|
||||
#define BOARD_ORTUR_4 1154 // Ortur 4
|
||||
#define BOARD_TENLOG_D3_HERO 1155 // Tenlog D3 Hero IDEX printer
|
||||
|
||||
//
|
||||
// RAMBo and derivatives
|
||||
|
|
|
|||
Loading…
Reference in a new issue