Merge pull request #1434 from AnHardt/LostInTranslation2
Introduction of a system to feed displays with the correct charsets. Example in language_de.h
This commit is contained in:
Scott Lahteine
commit
b40dd814b0
|
|
@ -533,6 +533,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
|||
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
|
||||
|
||||
//LCD and SD support
|
||||
|
||||
// Character based displays can have different extended charsets. If you see strange or missing characters on yours - try an other definition below.
|
||||
#define DISPLAY_CHARSET_HD44870_JAPAN // "ääööüüß°"
|
||||
//#define DISPLAY_CHARSET_HD44870_WESTERN // with better support for European languages. "ÄäÖöÜüß°"
|
||||
//#define DISPLAY_CHARSET_DOGM // for full graphics display "ÄäÖÖÜÜß°"
|
||||
|
||||
//#define ULTRA_LCD //general LCD support, also 16x2
|
||||
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
||||
//#define SDSUPPORT // Enable SD Card Support in Hardware Console
|
||||
|
|
|
|||
|
|
@ -1,6 +1,8 @@
|
|||
#ifndef LANGUAGE_H
|
||||
#define LANGUAGE_H
|
||||
|
||||
#include "Configuration.h"
|
||||
|
||||
#define LANGUAGE_CONCAT(M) #M
|
||||
#define GENERATE_LANGUAGE_INCLUDE(M) LANGUAGE_CONCAT(language_##M.h)
|
||||
|
||||
|
|
@ -160,6 +162,71 @@
|
|||
|
||||
#define MSG_ERR_EEPROM_WRITE "Error writing to EEPROM!"
|
||||
|
||||
// LCD Menu Messages
|
||||
|
||||
#define STR_Ae "Ae" // No charset known now. Default will be overruled when we know.
|
||||
#define STR_ae "ae"
|
||||
#define STR_Oe "Oe"
|
||||
#define STR_oe "oe"
|
||||
#define STR_Ue "Ue"
|
||||
#define STR_ue "ue"
|
||||
#define STR_sz "ss"
|
||||
#define STR_Deg ""
|
||||
#define STR_THERMOMETER "\302"
|
||||
|
||||
#ifdef DISPLAY_CHARSET_DOGM
|
||||
#define STR_Ae "\304" // U8glib
|
||||
#define STR_ae "\344"
|
||||
#define STR_Oe "\326"
|
||||
#define STR_oe STR_Oe
|
||||
#define STR_Ue "\334"
|
||||
#define STR_ue STR_Ue
|
||||
#define STR_sz "\337"
|
||||
#define STR_Deg "\260"
|
||||
#define STR_THERMOMETER "\377"
|
||||
#endif
|
||||
#ifdef DISPLAY_CHARSET_HD44870_JAPAN // HD44870 ROM Code: A00 (Japan)
|
||||
#define STR_ae "\xe1"
|
||||
#define STR_Ae STR_ae
|
||||
#define STR_oe "\357"
|
||||
#define STR_Oe STR_oe
|
||||
#define STR_ue "\365"
|
||||
#define STR_Ue STR_ue
|
||||
#define STR_sz "\342"
|
||||
#define STR_Deg "\271"
|
||||
#define STR_THERMOMETER "\302"
|
||||
#endif
|
||||
#ifdef DISPLAY_CHARSET_HD44870_WESTERN // HD44870 ROM Code: A02 (Western)
|
||||
#define STR_Ae "\216"
|
||||
#define STR_ae "\204"
|
||||
#define STR_Oe "\211"
|
||||
#define STR_oe "\204"
|
||||
#define STR_Ue "\212"
|
||||
#define STR_ue "\201"
|
||||
#define STR_sz "\160"
|
||||
#define STR_Deg "\337"
|
||||
#define STR_THERMOMETER "\302"
|
||||
#endif
|
||||
|
||||
/*
|
||||
#define TESTSTRING000 "\000\001\002\003\004\005\006\007\010\011\012\013\014\015\016\017"
|
||||
#define TESTSTRING020 "\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
|
||||
#define TESTSTRING040 "\040\041\042\043\044\045\046\047\050\051\052\053\054\055\056\057"
|
||||
#define TESTSTRING060 "\060\061\062\063\064\065\066\067\070\071\072\073\074\075\076\077"
|
||||
#define TESTSTRING100 "\100\101\102\103\104\105\106\107\110\111\112\113\114\115\116\117"
|
||||
#define TESTSTRING120 "\120\121\122\123\124\125\126\127\130\131\132\133\134\135\136\137"
|
||||
#define TESTSTRING140 "\140\141\142\143\144\145\146\147\150\151\152\153\154\155\156\157"
|
||||
#define TESTSTRING160 "\160\161\162\163\164\165\166\167\170\171\172\173\174\175\176\177"
|
||||
#define TESTSTRING200 "\200\201\202\203\204\205\206\207\210\211\212\213\214\215\216\217"
|
||||
#define TESTSTRING220 "\220\221\222\223\224\225\226\227\230\231\232\233\234\235\236\237"
|
||||
#define TESTSTRING240 "\240\241\242\243\244\245\246\247\250\251\252\253\254\255\256\257"
|
||||
#define TESTSTRING260 "\260\261\262\263\264\265\266\267\270\271\272\273\274\275\276\277"
|
||||
#define TESTSTRING300 "\300\301\302\303\304\305\306\307\310\311\312\313\314\315\316\317"
|
||||
#define TESTSTRING320 "\320\321\322\323\324\325\326\327\330\331\332\333\334\335\336\337"
|
||||
#define TESTSTRING340 "\340\341\342\343\344\345\346\347\350\351\352\353\354\355\356\357"
|
||||
#define TESTSTRING360 "\360\361\362\363\364\365\366\367\370\371\372\373\374\375\376\377"
|
||||
*/
|
||||
|
||||
#include LANGUAGE_INCLUDE
|
||||
|
||||
#endif //__LANGUAGE_H
|
||||
|
|
|
|||
|
|
@ -9,97 +9,96 @@
|
|||
#define LANGUAGE_DE_H
|
||||
|
||||
#define WELCOME_MSG MACHINE_NAME " Bereit."
|
||||
#define MSG_SD_INSERTED "SDKarte erkannt"
|
||||
#define MSG_SD_REMOVED "SDKarte entfernt"
|
||||
#define MSG_MAIN "Hauptmenü"
|
||||
#define MSG_SD_INSERTED "SDKarte erkannt."
|
||||
#define MSG_SD_REMOVED "SDKarte entfernt."
|
||||
#define MSG_MAIN "Hauptmen" STR_ue
|
||||
#define MSG_AUTOSTART "Autostart"
|
||||
#define MSG_DISABLE_STEPPERS "Stepper abschalt."
|
||||
#define MSG_AUTO_HOME "Auto Nullpunkt"
|
||||
#define MSG_SET_HOME_OFFSETS "Set home offsets"
|
||||
#define MSG_SET_ORIGIN "Setze Nullpunkt"
|
||||
#define MSG_PREHEAT_PLA "Vorwärmen PLA"
|
||||
#define MSG_PREHEAT_PLA_N "Vorwärmen PLA "
|
||||
#define MSG_DISABLE_STEPPERS "Motoren Aus" // M84
|
||||
#define MSG_AUTO_HOME "Home" // G28
|
||||
#define MSG_SET_HOME_OFFSETS "Setze Home hier"
|
||||
#define MSG_SET_ORIGIN "Setze Null hier" //"G92 X0 Y0 Z0" commented out in ultralcd.cpp
|
||||
#define MSG_PREHEAT_PLA "Vorw" STR_ae "rmen PLA"
|
||||
#define MSG_PREHEAT_PLA_N "Vorw" STR_ae "rmen PLA "
|
||||
#define MSG_PREHEAT_PLA_ALL "Vorw. PLA Alle"
|
||||
#define MSG_PREHEAT_PLA_BEDONLY "Vorw. PLA Bett"
|
||||
#define MSG_PREHEAT_PLA_SETTINGS "Vorwärm. PLA Ein."
|
||||
#define MSG_PREHEAT_ABS "Vorwärmen ABS"
|
||||
#define MSG_PREHEAT_ABS_N "Vorwärmen ABS "
|
||||
#define MSG_PREHEAT_PLA_SETTINGS "Vorw" STR_ae "rm. PLA Ein."
|
||||
#define MSG_PREHEAT_ABS "Vorw" STR_ae "rmen ABS"
|
||||
#define MSG_PREHEAT_ABS_N "Vorw" STR_ae "rmen ABS "
|
||||
#define MSG_PREHEAT_ABS_ALL "Vorw. ABS Alle"
|
||||
#define MSG_PREHEAT_ABS_BEDONLY "Vorw. ABS Bett"
|
||||
#define MSG_PREHEAT_ABS_SETTINGS "Vorwärm. ABS Ein."
|
||||
#define MSG_COOLDOWN "Abkühlen"
|
||||
#define MSG_SWITCH_PS_ON "Switch Power On"
|
||||
#define MSG_SWITCH_PS_OFF "Switch Power Off"
|
||||
#define MSG_EXTRUDE "Extrude"
|
||||
#define MSG_PREHEAT_ABS_SETTINGS "Vorw" STR_ae "rm. ABS Ein."
|
||||
#define MSG_COOLDOWN "Abk" STR_ue "hlen"
|
||||
#define MSG_SWITCH_PS_ON "Netzteil Ein"
|
||||
#define MSG_SWITCH_PS_OFF "Netzteil Aus"
|
||||
#define MSG_RETRACT "Retract"
|
||||
#define MSG_MOVE_AXIS "Achsen bewegen"
|
||||
#define MSG_MOVE_X "X bewegen"
|
||||
#define MSG_MOVE_Y "Y bewegen"
|
||||
#define MSG_MOVE_Z "Z bewegen"
|
||||
#define MSG_MOVE_E "Extruder"
|
||||
#define MSG_MOVE_01MM "0.1mm bewegen"
|
||||
#define MSG_MOVE_1MM "1mm bewegen"
|
||||
#define MSG_MOVE_10MM "10mm bewegen"
|
||||
#define MSG_SPEED "Geschw"
|
||||
#define MSG_NOZZLE "Düse"
|
||||
#define MSG_MOVE_AXIS "Bewegen"
|
||||
#define MSG_MOVE_X "X"
|
||||
#define MSG_MOVE_Y "Y"
|
||||
#define MSG_MOVE_Z "Z"
|
||||
#define MSG_MOVE_E "E"
|
||||
#define MSG_MOVE_01MM " 0.1 mm"
|
||||
#define MSG_MOVE_1MM " 1.0 mm"
|
||||
#define MSG_MOVE_10MM "10.0 mm"
|
||||
#define MSG_SPEED "Geschw."
|
||||
#define MSG_NOZZLE "D" STR_ue "se"
|
||||
#define MSG_BED "Bett"
|
||||
#define MSG_FAN_SPEED "Lüftergeschw."
|
||||
#define MSG_FAN_SPEED "L" STR_ue "ftergeschw."
|
||||
#define MSG_FLOW "Fluss"
|
||||
#define MSG_CONTROL "Einstellungen"
|
||||
#define MSG_MIN "\002 Min"
|
||||
#define MSG_MAX "\002 Max"
|
||||
#define MSG_FACTOR "\002 Faktor"
|
||||
#define MSG_MIN STR_THERMOMETER " Min"
|
||||
#define MSG_MAX STR_THERMOMETER " Max"
|
||||
#define MSG_FACTOR STR_THERMOMETER " Faktor"
|
||||
#define MSG_AUTOTEMP "AutoTemp"
|
||||
#define MSG_ON "Ein"
|
||||
#define MSG_OFF "Aus"
|
||||
#define MSG_PID_P "PID-P"
|
||||
#define MSG_PID_I "PID-I"
|
||||
#define MSG_PID_D "PID-D"
|
||||
#define MSG_PID_C "PID-C"
|
||||
#define MSG_ACC "Acc"
|
||||
#define MSG_VXY_JERK "Vxy-jerk"
|
||||
#define MSG_VZ_JERK "Vz-jerk"
|
||||
#define MSG_VE_JERK "Ve-jerk"
|
||||
#define MSG_VMAX "Vmax "
|
||||
#define MSG_PID_P "PID P"
|
||||
#define MSG_PID_I "PID I"
|
||||
#define MSG_PID_D "PID D"
|
||||
#define MSG_PID_C "PID C"
|
||||
#define MSG_ACC "A"
|
||||
#define MSG_VXY_JERK "V xy jerk"
|
||||
#define MSG_VZ_JERK "V z jerk"
|
||||
#define MSG_VE_JERK "V e jerk"
|
||||
#define MSG_VMAX "V max " // space by purpose
|
||||
#define MSG_X "x"
|
||||
#define MSG_Y "y"
|
||||
#define MSG_Z "z"
|
||||
#define MSG_E "e"
|
||||
#define MSG_VMIN "Vmin"
|
||||
#define MSG_VMIN "V min"
|
||||
#define MSG_VTRAV_MIN "VTrav min"
|
||||
#define MSG_AMAX "Amax "
|
||||
#define MSG_A_RETRACT "A-Retract"
|
||||
#define MSG_XSTEPS "Xsteps/mm"
|
||||
#define MSG_YSTEPS "Ysteps/mm"
|
||||
#define MSG_ZSTEPS "Zsteps/mm"
|
||||
#define MSG_ESTEPS "Esteps/mm"
|
||||
#define MSG_AMAX "A max " // space by purpose
|
||||
#define MSG_A_RETRACT "A Retract"
|
||||
#define MSG_XSTEPS "X steps/mm"
|
||||
#define MSG_YSTEPS "Y steps/mm"
|
||||
#define MSG_ZSTEPS "Z steps/mm"
|
||||
#define MSG_ESTEPS "E steps/mm"
|
||||
#define MSG_TEMPERATURE "Temperatur"
|
||||
#define MSG_MOTION "Bewegung"
|
||||
#define MSG_VOLUMETRIC "Filament"
|
||||
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
|
||||
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
|
||||
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
|
||||
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
|
||||
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Filament D 1"
|
||||
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Filament D 2"
|
||||
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Filament D 3"
|
||||
#define MSG_CONTRAST "LCD contrast"
|
||||
#define MSG_STORE_EPROM "EPROM speichern"
|
||||
#define MSG_LOAD_EPROM "EPROM laden"
|
||||
#define MSG_RESTORE_FAILSAFE "Standardkonfig."
|
||||
#define MSG_REFRESH "Aktualisieren"
|
||||
#define MSG_WATCH "Beobachten"
|
||||
#define MSG_WATCH "Info"
|
||||
#define MSG_PREPARE "Vorbereitung"
|
||||
#define MSG_TUNE "Justierung"
|
||||
#define MSG_PAUSE_PRINT "Druck anhalten"
|
||||
#define MSG_RESUME_PRINT "Druck fortsetz"
|
||||
#define MSG_STOP_PRINT "Druck stoppen"
|
||||
#define MSG_CARD_MENU "SDKarten Menü"
|
||||
#define MSG_PAUSE_PRINT "SD-Druck Pause"
|
||||
#define MSG_RESUME_PRINT "SD-Druck Weiter"
|
||||
#define MSG_STOP_PRINT "SD-Druck Abbruch"
|
||||
#define MSG_CARD_MENU "SDKarte"
|
||||
#define MSG_NO_CARD "Keine SDKarte"
|
||||
#define MSG_DWELL "Warten..."
|
||||
#define MSG_USERWAIT "Warte auf Nutzer"
|
||||
#define MSG_RESUMING "Druck fortsetzung"
|
||||
#define MSG_PRINT_ABORTED "Print aborted"
|
||||
#define MSG_NO_MOVE "Kein Zug."
|
||||
#define MSG_KILLED "KILLED"
|
||||
#define MSG_STOPPED "GESTOPPT"
|
||||
#define MSG_USERWAIT "Warte auf Nutzer."
|
||||
#define MSG_RESUMING "Druck geht weiter"
|
||||
#define MSG_PRINT_ABORTED "Druck abgebrochen"
|
||||
#define MSG_NO_MOVE "Motoren Eingesch."
|
||||
#define MSG_KILLED "KILLED."
|
||||
#define MSG_STOPPED "ANGEHALTEN."
|
||||
#define MSG_CONTROL_RETRACT "Retract mm"
|
||||
#define MSG_CONTROL_RETRACT_SWAP "Wechs. Retract mm"
|
||||
#define MSG_CONTROL_RETRACTF "Retract V"
|
||||
|
|
@ -109,22 +108,22 @@
|
|||
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
||||
#define MSG_AUTORETRACT "AutoRetr."
|
||||
#define MSG_FILAMENTCHANGE "Filament wechseln"
|
||||
#define MSG_INIT_SDCARD "Init. SD-Card"
|
||||
#define MSG_CNG_SDCARD "Change SD-Card"
|
||||
#define MSG_ZPROBE_OUT "Z probe out. bed"
|
||||
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
|
||||
#define MSG_INIT_SDCARD "SDKarte erkennen"// Manually initialize the SD-card via user interface
|
||||
#define MSG_CNG_SDCARD "SDKarte erkennen"// SD-card changed by user. For machines with no autocarddetect. Both send "M21"
|
||||
#define MSG_ZPROBE_OUT "Sensor ausserhalb"
|
||||
#define MSG_POSITION_UNKNOWN "X/Y vor Z Homen."
|
||||
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
||||
#define MSG_BABYSTEP_X "Babystep X"
|
||||
#define MSG_BABYSTEP_Y "Babystep Y"
|
||||
#define MSG_BABYSTEP_Z "Babystep Z"
|
||||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||||
#define MSG_ENDSTOP_ABORT "Endstop Abbr. Ein"
|
||||
|
||||
#ifdef DELTA_CALIBRATION_MENU
|
||||
#define MSG_DELTA_CALIBRATE "Delta Calibration"
|
||||
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
|
||||
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
|
||||
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
|
||||
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
|
||||
#define MSG_DELTA_CALIBRATE "Delta Kalibrieren"
|
||||
#define MSG_DELTA_CALIBRATE_X "Kalibriere X"
|
||||
#define MSG_DELTA_CALIBRATE_Y "Kalibriere Y"
|
||||
#define MSG_DELTA_CALIBRATE_Z "Kalibriere Z"
|
||||
#define MSG_DELTA_CALIBRATE_CENTER "Kalibriere Mitte"
|
||||
#endif // DELTA_CALIBRATION_MENU
|
||||
|
||||
#endif // LANGUAGE_DE_H
|
||||
|
|
|
|||
Loading…
Reference in a new issue