zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

🎨 Fewer serial macros

Browse source
This commit is contained in:
Scott Lahteine 2021-09-09 04:57:05 -05:00 committed by Scott Lahteine
parent 6d96c221bd
commit b661795ae5
159 changed files with 1002 additions and 1014 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
Marlin/src/HAL/AVR/fastio.cpp
View file

@ -267,11 +267,11 @@ uint16_t set_pwm_frequency_hz(const_float_t hz, const float dca, const float dcb
SET_WGM(5, FAST_PWM_ICRn); // Fast PWM with ICR5 as TOP
//SERIAL_ECHOLNPGM("Timer 5 Settings:");
//SERIAL_ECHOLNPAIR(" Prescaler=", prescaler);
//SERIAL_ECHOLNPAIR(" TOP=", ICR5);
//SERIAL_ECHOLNPAIR(" OCR5A=", OCR5A);
//SERIAL_ECHOLNPAIR(" OCR5B=", OCR5B);
//SERIAL_ECHOLNPAIR(" OCR5C=", OCR5C);
//SERIAL_ECHOLNPGM(" Prescaler=", prescaler);
//SERIAL_ECHOLNPGM(" TOP=", ICR5);
//SERIAL_ECHOLNPGM(" OCR5A=", OCR5A);
//SERIAL_ECHOLNPGM(" OCR5B=", OCR5B);
//SERIAL_ECHOLNPGM(" OCR5C=", OCR5C);
}
else {
// Restore the default for Timer 5

16
Marlin/src/HAL/AVR/pinsDebug.h
View file

@ -235,9 +235,9 @@ static void print_is_also_tied() { SERIAL_ECHOPGM(" is also tied to this pin");
inline void com_print(const uint8_t N, const uint8_t Z) {
const uint8_t *TCCRA = (uint8_t*)TCCR_A(N);
SERIAL_ECHOPAIR(" COM", AS_DIGIT(N));
SERIAL_ECHOPGM(" COM", AS_DIGIT(N));
SERIAL_CHAR(Z);
SERIAL_ECHOPAIR(": ", int((*TCCRA >> (6 - Z * 2)) & 0x03));
SERIAL_ECHOPGM(": ", int((*TCCRA >> (6 - Z * 2)) & 0x03));
}
void timer_prefix(uint8_t T, char L, uint8_t N) { // T - timer L - pwm N - WGM bit layout
@ -247,7 +247,7 @@ void timer_prefix(uint8_t T, char L, uint8_t N) { // T - timer L - pwm N -
uint8_t WGM = (((*TCCRB & _BV(WGM_2)) >> 1) | (*TCCRA & (_BV(WGM_0) | _BV(WGM_1))));
if (N == 4) WGM |= ((*TCCRB & _BV(WGM_3)) >> 1);
SERIAL_ECHOPAIR(" TIMER", AS_DIGIT(T));
SERIAL_ECHOPGM(" TIMER", AS_DIGIT(T));
SERIAL_CHAR(L);
SERIAL_ECHO_SP(3);
@ -259,14 +259,14 @@ void timer_prefix(uint8_t T, char L, uint8_t N) { // T - timer L - pwm N -
const uint16_t *OCRVAL16 = (uint16_t*)OCR_VAL(T, L - 'A');
PWM_PRINT(*OCRVAL16);
}
SERIAL_ECHOPAIR(" WGM: ", WGM);
SERIAL_ECHOPGM(" WGM: ", WGM);
com_print(T,L);
SERIAL_ECHOPAIR(" CS: ", (*TCCRB & (_BV(CS_0) | _BV(CS_1) | _BV(CS_2)) ));
SERIAL_ECHOPAIR(" TCCR", AS_DIGIT(T), "A: ", *TCCRA);
SERIAL_ECHOPAIR(" TCCR", AS_DIGIT(T), "B: ", *TCCRB);
SERIAL_ECHOPGM(" CS: ", (*TCCRB & (_BV(CS_0) | _BV(CS_1) | _BV(CS_2)) ));
SERIAL_ECHOPGM(" TCCR", AS_DIGIT(T), "A: ", *TCCRA);
SERIAL_ECHOPGM(" TCCR", AS_DIGIT(T), "B: ", *TCCRB);
const uint8_t *TMSK = (uint8_t*)TIMSK(T);
SERIAL_ECHOPAIR(" TIMSK", AS_DIGIT(T), ": ", *TMSK);
SERIAL_ECHOPGM(" TIMSK", AS_DIGIT(T), ": ", *TMSK);
const uint8_t OCIE = L - 'A' + 1;
if (N == 3) { if (WGM == 0 || WGM == 2 || WGM == 4 || WGM == 6) err_is_counter(); }

34
Marlin/src/HAL/DUE/eeprom_flash.cpp
View file

@ -200,9 +200,9 @@ static bool ee_PageWrite(uint16_t page, const void *data) {
pageContents[i] = (((uint32_t*)data)[i]) | (~(pageContents[i] ^ ((uint32_t*)data)[i]));
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM PageWrite ", page);
DEBUG_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
DEBUG_ECHOLNPAIR(" base address ", (uint32_t)getFlashStorage(0));
DEBUG_ECHOLNPGM("EEPROM PageWrite ", page);
DEBUG_ECHOLNPGM(" in FLASH address ", (uint32_t)addrflash);
DEBUG_ECHOLNPGM(" base address ", (uint32_t)getFlashStorage(0));
DEBUG_FLUSH();
// Get the page relative to the start of the EFC controller, and the EFC controller to use
@ -246,7 +246,7 @@ static bool ee_PageWrite(uint16_t page, const void *data) {
__enable_irq();
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM Unlock failure for page ", page);
DEBUG_ECHOLNPGM("EEPROM Unlock failure for page ", page);
return false;
}
@ -271,7 +271,7 @@ static bool ee_PageWrite(uint16_t page, const void *data) {
__enable_irq();
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM Write failure for page ", page);
DEBUG_ECHOLNPGM("EEPROM Write failure for page ", page);
return false;
}
@ -287,7 +287,7 @@ static bool ee_PageWrite(uint16_t page, const void *data) {
#ifdef EE_EMU_DEBUG
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM Verify Write failure for page ", page);
DEBUG_ECHOLNPGM("EEPROM Verify Write failure for page ", page);
ee_Dump( page, (uint32_t *)addrflash);
ee_Dump(-page, data);
@ -306,7 +306,7 @@ static bool ee_PageWrite(uint16_t page, const void *data) {
}
}
}
DEBUG_ECHOLNPAIR("--> Differing bits: ", count);
DEBUG_ECHOLNPGM("--> Differing bits: ", count);
#endif
return false;
@ -326,9 +326,9 @@ static bool ee_PageErase(uint16_t page) {
uint32_t addrflash = uint32_t(getFlashStorage(page));
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM PageErase ", page);
DEBUG_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
DEBUG_ECHOLNPAIR(" base address ", (uint32_t)getFlashStorage(0));
DEBUG_ECHOLNPGM("EEPROM PageErase ", page);
DEBUG_ECHOLNPGM(" in FLASH address ", (uint32_t)addrflash);
DEBUG_ECHOLNPGM(" base address ", (uint32_t)getFlashStorage(0));
DEBUG_FLUSH();
// Get the page relative to the start of the EFC controller, and the EFC controller to use
@ -371,7 +371,7 @@ static bool ee_PageErase(uint16_t page) {
__enable_irq();
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM Unlock failure for page ",page);
DEBUG_ECHOLNPGM("EEPROM Unlock failure for page ",page);
return false;
}
@ -395,7 +395,7 @@ static bool ee_PageErase(uint16_t page) {
__enable_irq();
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM Erase failure for page ",page);
DEBUG_ECHOLNPGM("EEPROM Erase failure for page ",page);
return false;
}
@ -411,7 +411,7 @@ static bool ee_PageErase(uint16_t page) {
for (i = 0; i < PageSize >> 2; i++) {
if (*aligned_src++ != 0xFFFFFFFF) {
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM Verify Erase failure for page ",page);
DEBUG_ECHOLNPGM("EEPROM Verify Erase failure for page ",page);
ee_Dump(page, (uint32_t *)addrflash);
return false;
}
@ -922,7 +922,7 @@ static void ee_Init() {
if (curGroup >= GroupCount) curGroup = 0;
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM Current Group: ",curGroup);
DEBUG_ECHOLNPGM("EEPROM Current Group: ",curGroup);
DEBUG_FLUSH();
// Now, validate that all the other group pages are empty
@ -932,7 +932,7 @@ static void ee_Init() {
for (int page = 0; page < PagesPerGroup; page++) {
if (!ee_IsPageClean(grp * PagesPerGroup + page)) {
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM Page ", page, " not clean on group ", grp);
DEBUG_ECHOLNPGM("EEPROM Page ", page, " not clean on group ", grp);
DEBUG_FLUSH();
ee_PageErase(grp * PagesPerGroup + page);
}
@ -949,14 +949,14 @@ static void ee_Init() {
}
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM Active page: ", curPage);
DEBUG_ECHOLNPGM("EEPROM Active page: ", curPage);
DEBUG_FLUSH();
// Make sure the pages following the first clean one are also clean
for (int page = curPage + 1; page < PagesPerGroup; page++) {
if (!ee_IsPageClean(curGroup * PagesPerGroup + page)) {
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM Page ", page, " not clean on active group ", curGroup);
DEBUG_ECHOLNPGM("EEPROM Page ", page, " not clean on active group ", curGroup);
DEBUG_FLUSH();
ee_Dump(curGroup * PagesPerGroup + page, getFlashStorage(curGroup * PagesPerGroup + page));
ee_PageErase(curGroup * PagesPerGroup + page);

2
Marlin/src/HAL/DUE/pinsDebug.h
View file

@ -87,7 +87,7 @@ bool GET_PINMODE(int8_t pin) { // 1: output, 0: input
void pwm_details(int32_t pin) {
if (pwm_status(pin)) {
uint32_t chan = g_APinDescription[pin].ulPWMChannel;
SERIAL_ECHOPAIR("PWM = ", PWM_INTERFACE->PWM_CH_NUM[chan].PWM_CDTY);
SERIAL_ECHOPGM("PWM = ", PWM_INTERFACE->PWM_CH_NUM[chan].PWM_CDTY);
}
}

2
Marlin/src/HAL/ESP32/wifi.cpp
View file

@ -59,7 +59,7 @@ void wifi_init() {
MDNS.addService("http", "tcp", 80);
SERIAL_ECHOLNPAIR("Successfully connected to WiFi with SSID '" WIFI_SSID "', hostname: '" WIFI_HOSTNAME "', IP address: ", WiFi.localIP().toString().c_str());
SERIAL_ECHOLNPGM("Successfully connected to WiFi with SSID '" WIFI_SSID "', hostname: '" WIFI_HOSTNAME "', IP address: ", WiFi.localIP().toString().c_str());
}
#endif // WIFISUPPORT

8
Marlin/src/HAL/LPC1768/eeprom_sdcard.cpp
View file

@ -84,15 +84,15 @@ static void debug_rw(const bool write, int &pos, const uint8_t *value, const siz
PGM_P const rw_str = write ? PSTR("write") : PSTR("read");
SERIAL_CHAR(' ');
SERIAL_ECHOPGM_P(rw_str);
SERIAL_ECHOLNPAIR("_data(", pos, ",", value, ",", size, ", ...)");
SERIAL_ECHOLNPGM("_data(", pos, ",", value, ",", size, ", ...)");
if (total) {
SERIAL_ECHOPGM(" f_");
SERIAL_ECHOPGM_P(rw_str);
SERIAL_ECHOPAIR("()=", s, "\n size=", size, "\n bytes_");
SERIAL_ECHOLNPAIR_P(write ? PSTR("written=") : PSTR("read="), total);
SERIAL_ECHOPGM("()=", s, "\n size=", size, "\n bytes_");
SERIAL_ECHOLNPGM_P(write ? PSTR("written=") : PSTR("read="), total);
}
else
SERIAL_ECHOLNPAIR(" f_lseek()=", s);
SERIAL_ECHOLNPGM(" f_lseek()=", s);
}
// File function return codes for type FRESULT. This goes away soon, but

2
Marlin/src/HAL/SAMD51/pinsDebug.h
View file

@ -48,7 +48,7 @@ bool GET_PINMODE(int8_t pin) { // 1: output, 0: input
void pwm_details(int32_t pin) {
if (pwm_status(pin)) {
//uint32_t chan = g_APinDescription[pin].ulPWMChannel TODO when fast pwm is operative;
//SERIAL_ECHOPAIR("PWM = ", duty);
//SERIAL_ECHOPGM("PWM = ", duty);
}
}

16
Marlin/src/HAL/STM32/eeprom_flash.cpp
View file

@ -133,7 +133,7 @@ bool PersistentStore::access_start() {
// load current settings
uint8_t *eeprom_data = (uint8_t *)SLOT_ADDRESS(current_slot);
for (int i = 0; i < MARLIN_EEPROM_SIZE; i++) ram_eeprom[i] = eeprom_data[i];
DEBUG_ECHOLNPAIR("EEPROM loaded from slot ", current_slot, ".");
DEBUG_ECHOLNPGM("EEPROM loaded from slot ", current_slot, ".");
}
eeprom_data_written = false;
}
@ -179,9 +179,9 @@ bool PersistentStore::access_finish() {
ENABLE_ISRS();
TERN_(HAS_PAUSE_SERVO_OUTPUT, RESUME_SERVO_OUTPUT());
if (status != HAL_OK) {
DEBUG_ECHOLNPAIR("HAL_FLASHEx_Erase=", status);
DEBUG_ECHOLNPAIR("GetError=", HAL_FLASH_GetError());
DEBUG_ECHOLNPAIR("SectorError=", SectorError);
DEBUG_ECHOLNPGM("HAL_FLASHEx_Erase=", status);
DEBUG_ECHOLNPGM("GetError=", HAL_FLASH_GetError());
DEBUG_ECHOLNPGM("SectorError=", SectorError);
LOCK_FLASH();
return false;
}
@ -204,9 +204,9 @@ bool PersistentStore::access_finish() {
offset += sizeof(uint32_t);
}
else {
DEBUG_ECHOLNPAIR("HAL_FLASH_Program=", status);
DEBUG_ECHOLNPAIR("GetError=", HAL_FLASH_GetError());
DEBUG_ECHOLNPAIR("address=", address);
DEBUG_ECHOLNPGM("HAL_FLASH_Program=", status);
DEBUG_ECHOLNPGM("GetError=", HAL_FLASH_GetError());
DEBUG_ECHOLNPGM("address=", address);
success = false;
break;
}
@ -216,7 +216,7 @@ bool PersistentStore::access_finish() {
if (success) {
eeprom_data_written = false;
DEBUG_ECHOLNPAIR("EEPROM saved to slot ", current_slot, ".");
DEBUG_ECHOLNPGM("EEPROM saved to slot ", current_slot, ".");
}
return success;

2
Marlin/src/HAL/STM32/pinsDebug.h
View file

@ -237,7 +237,7 @@ void pwm_details(const pin_t Ard_num) {
if (over_7) pin_number -= 8;
uint8_t alt_func = (alt_all >> (4 * pin_number)) & 0x0F;
SERIAL_ECHOPAIR("Alt Function: ", alt_func);
SERIAL_ECHOPGM("Alt Function: ", alt_func);
if (alt_func < 10) SERIAL_CHAR(' ');
SERIAL_ECHOPGM(" - ");
switch (alt_func) {

6
Marlin/src/HAL/STM32/usb_host.cpp
View file

@ -88,9 +88,9 @@ void USBHost::setUsbTaskState(uint8_t state) {
capacity = info.capacity.block_nbr / 2000;
block_size = info.capacity.block_size;
block_count = info.capacity.block_nbr;
// SERIAL_ECHOLNPAIR("info.capacity.block_nbr : %ld\n", info.capacity.block_nbr);
// SERIAL_ECHOLNPAIR("info.capacity.block_size: %d\n", info.capacity.block_size);
// SERIAL_ECHOLNPAIR("capacity : %d MB\n", capacity);
//SERIAL_ECHOLNPGM("info.capacity.block_nbr : %ld\n", info.capacity.block_nbr);
//SERIAL_ECHOLNPGM("info.capacity.block_size: %d\n", info.capacity.block_size);
//SERIAL_ECHOLNPGM("capacity : %d MB\n", capacity);
}
};

6
Marlin/src/HAL/shared/Delay.cpp
View file

@ -110,16 +110,16 @@
auto report_call_time = [](PGM_P const name, PGM_P const unit, const uint32_t cycles, const uint32_t total, const bool do_flush=true) {
SERIAL_ECHOPGM("Calling ");
SERIAL_ECHOPGM_P(name);
SERIAL_ECHOLNPAIR(" for ", cycles);
SERIAL_ECHOLNPGM(" for ", cycles);
SERIAL_ECHOPGM_P(unit);
SERIAL_ECHOLNPAIR(" took: ", total);
SERIAL_ECHOLNPGM(" took: ", total);
SERIAL_ECHOPGM_P(unit);
if (do_flush) SERIAL_FLUSHTX();
};
uint32_t s, e;
SERIAL_ECHOLNPAIR("Computed delay calibration value: ", ASM_CYCLES_PER_ITERATION);
SERIAL_ECHOLNPGM("Computed delay calibration value: ", ASM_CYCLES_PER_ITERATION);
SERIAL_FLUSH();
// Display the results of the calibration above
constexpr uint32_t testValues[] = { 1, 5, 10, 20, 50, 100, 150, 200, 350, 500, 750, 1000 };

4
Marlin/src/MarlinCore.cpp
View file

@ -798,7 +798,7 @@ inline void manage_inactivity(const bool no_stepper_sleep=false) {
void idle(bool no_stepper_sleep/*=false*/) {
#if ENABLED(MARLIN_DEV_MODE)
static uint16_t idle_depth = 0;
if (++idle_depth > 5) SERIAL_ECHOLNPAIR("idle() call depth: ", idle_depth);
if (++idle_depth > 5) SERIAL_ECHOLNPGM("idle() call depth: ", idle_depth);
#endif
// Core Marlin activities
@ -1623,7 +1623,7 @@ void setup() {
#if BOTH(HAS_WIRED_LCD, SHOW_BOOTSCREEN)
const millis_t elapsed = millis() - bootscreen_ms;
#if ENABLED(MARLIN_DEV_MODE)
SERIAL_ECHOLNPAIR("elapsed=", elapsed);
SERIAL_ECHOLNPGM("elapsed=", elapsed);
#endif
SETUP_RUN(ui.bootscreen_completion(elapsed));
#endif

12
Marlin/src/core/bug_on.h
View file

@ -20,19 +20,19 @@
*/
#pragma once
// We need SERIAL_ECHOPAIR and macros.h
// We need SERIAL_ECHOPGM and macros.h
#include "serial.h"
#if ENABLED(POSTMORTEM_DEBUGGING)
// Useful macro for stopping the CPU on an unexpected condition
// This is used like SERIAL_ECHOPAIR, that is: a key-value call of the local variables you want
// This is used like SERIAL_ECHOPGM, that is: a key-value call of the local variables you want
// to dump to the serial port before stopping the CPU.
// \/ Don't replace by SERIAL_ECHOPAIR since ONLY_FILENAME cannot be transformed to a PGM string on Arduino and it breaks building
#define BUG_ON(V...) do { SERIAL_ECHO(ONLY_FILENAME); SERIAL_ECHO(__LINE__); SERIAL_ECHOLNPGM(": "); SERIAL_ECHOLNPAIR(V); SERIAL_FLUSHTX(); *(char*)0 = 42; } while(0)
// \/ Don't replace by SERIAL_ECHOPGM since ONLY_FILENAME cannot be transformed to a PGM string on Arduino and it breaks building
#define BUG_ON(V...) do { SERIAL_ECHO(ONLY_FILENAME); SERIAL_ECHO(__LINE__); SERIAL_ECHOLNPGM(": "); SERIAL_ECHOLNPGM(V); SERIAL_FLUSHTX(); *(char*)0 = 42; } while(0)
#elif ENABLED(MARLIN_DEV_MODE)
// Don't stop the CPU here, but at least dump the bug on the serial port
// \/ Don't replace by SERIAL_ECHOPAIR since ONLY_FILENAME cannot be transformed to a PGM string on Arduino and it breaks building
#define BUG_ON(V...) do { SERIAL_ECHO(ONLY_FILENAME); SERIAL_ECHO(__LINE__); SERIAL_ECHOLNPGM(": BUG!"); SERIAL_ECHOLNPAIR(V); SERIAL_FLUSHTX(); } while(0)
// \/ Don't replace by SERIAL_ECHOPGM since ONLY_FILENAME cannot be transformed to a PGM string on Arduino and it breaks building
#define BUG_ON(V...) do { SERIAL_ECHO(ONLY_FILENAME); SERIAL_ECHO(__LINE__); SERIAL_ECHOLNPGM(": BUG!"); SERIAL_ECHOLNPGM(V); SERIAL_FLUSHTX(); } while(0)
#else
// Release mode, let's ignore the bug
#define BUG_ON(V...) NOOP

22
Marlin/src/core/debug_out.h
View file

@ -27,7 +27,6 @@
//
#undef DEBUG_SECTION
#undef DEBUG_ECHOPGM_P
#undef DEBUG_ECHO_START
#undef DEBUG_ERROR_START
#undef DEBUG_CHAR
@ -37,12 +36,10 @@
#undef DEBUG_ECHOLN
#undef DEBUG_ECHOPGM
#undef DEBUG_ECHOLNPGM
#undef DEBUG_ECHOPAIR
#undef DEBUG_ECHOPAIR_P
#undef DEBUG_ECHOPGM_P
#undef DEBUG_ECHOLNPGM_P
#undef DEBUG_ECHOPAIR_F
#undef DEBUG_ECHOPAIR_F_P
#undef DEBUG_ECHOLNPAIR
#undef DEBUG_ECHOLNPAIR_P
#undef DEBUG_ECHOLNPAIR_F
#undef DEBUG_ECHOLNPAIR_F_P
#undef DEBUG_ECHO_MSG
@ -69,12 +66,12 @@
#define DEBUG_ECHOLN SERIAL_ECHOLN
#define DEBUG_ECHOPGM SERIAL_ECHOPGM
#define DEBUG_ECHOLNPGM SERIAL_ECHOLNPGM
#define DEBUG_ECHOPAIR SERIAL_ECHOPAIR
#define DEBUG_ECHOPAIR_P SERIAL_ECHOPAIR_P
#define DEBUG_ECHOPGM SERIAL_ECHOPGM
#define DEBUG_ECHOPGM_P SERIAL_ECHOPGM_P
#define DEBUG_ECHOPAIR_F SERIAL_ECHOPAIR_F
#define DEBUG_ECHOPAIR_F_P SERIAL_ECHOPAIR_F_P
#define DEBUG_ECHOLNPAIR SERIAL_ECHOLNPAIR
#define DEBUG_ECHOLNPAIR_P SERIAL_ECHOLNPAIR_P
#define DEBUG_ECHOLNPGM SERIAL_ECHOLNPGM
#define DEBUG_ECHOLNPGM_P SERIAL_ECHOLNPGM_P
#define DEBUG_ECHOLNPAIR_F SERIAL_ECHOLNPAIR_F
#define DEBUG_ECHOLNPAIR_F_P SERIAL_ECHOLNPAIR_F_P
#define DEBUG_ECHO_MSG SERIAL_ECHO_MSG
@ -89,7 +86,6 @@
#else
#define DEBUG_SECTION(...) NOOP
#define DEBUG_ECHOPGM_P(P) NOOP
#define DEBUG_ECHO_START() NOOP
#define DEBUG_ERROR_START() NOOP
#define DEBUG_CHAR(...) NOOP
@ -99,12 +95,10 @@
#define DEBUG_ECHOLN(...) NOOP
#define DEBUG_ECHOPGM(...) NOOP
#define DEBUG_ECHOLNPGM(...) NOOP
#define DEBUG_ECHOPAIR(...) NOOP
#define DEBUG_ECHOPAIR_P(...) NOOP
#define DEBUG_ECHOPGM_P(...) NOOP
#define DEBUG_ECHOLNPGM_P(...) NOOP
#define DEBUG_ECHOPAIR_F(...) NOOP
#define DEBUG_ECHOPAIR_F_P(...) NOOP
#define DEBUG_ECHOLNPAIR(...) NOOP
#define DEBUG_ECHOLNPAIR_P(...) NOOP
#define DEBUG_ECHOLNPAIR_F(...) NOOP
#define DEBUG_ECHOLNPAIR_F_P(...) NOOP
#define DEBUG_ECHO_MSG(...) NOOP

2
Marlin/src/core/serial.cpp
View file

@ -96,7 +96,7 @@ void print_bin(uint16_t val) {
void print_pos(LINEAR_AXIS_ARGS(const_float_t), PGM_P const prefix/*=nullptr*/, PGM_P const suffix/*=nullptr*/) {
if (prefix) serialprintPGM(prefix);
SERIAL_ECHOPAIR_P(
SERIAL_ECHOPGM_P(
LIST_N(DOUBLE(LINEAR_AXES), SP_X_STR, x, SP_Y_STR, y, SP_Z_STR, z, SP_I_STR, i, SP_J_STR, j, SP_K_STR, k)
);
if (suffix) serialprintPGM(suffix); else SERIAL_EOL();

36
Marlin/src/core/serial.h
View file

@ -188,44 +188,44 @@ inline void SERIAL_FLUSHTX() { SERIAL_IMPL.flushTX(); }
void serialprintPGM(PGM_P str);
//
// SERIAL_ECHOPAIR... macros are used to output string-value pairs.
// SERIAL_ECHOPGM... macros are used to output string-value pairs.
//
// Print up to 20 pairs of values. Odd elements must be literal strings.
#define __SEP_N(N,V...) _SEP_##N(V)
#define _SEP_N(N,V...) __SEP_N(N,V)
#define _SEP_N_REF() _SEP_N
#define _SEP_1(s) SERIAL_ECHOPGM(s);
#define _SEP_1(s) serialprintPGM(PSTR(s));
#define _SEP_2(s,v) serial_echopair_PGM(PSTR(s),v);
#define _SEP_3(s,v,V...) _SEP_2(s,v); DEFER2(_SEP_N_REF)()(TWO_ARGS(V),V);
#define SERIAL_ECHOPAIR(V...) do{ EVAL(_SEP_N(TWO_ARGS(V),V)); }while(0)
#define SERIAL_ECHOPGM(V...) do{ EVAL(_SEP_N(TWO_ARGS(V),V)); }while(0)
// Print up to 20 pairs of values followed by newline. Odd elements must be literal strings.
#define __SELP_N(N,V...) _SELP_##N(V)
#define _SELP_N(N,V...) __SELP_N(N,V)
#define _SELP_N_REF() _SELP_N
#define _SELP_1(s) SERIAL_ECHOLNPGM(s);
#define _SELP_1(s) serialprintPGM(PSTR(s "\n"));
#define _SELP_2(s,v) serial_echopair_PGM(PSTR(s),v); SERIAL_EOL();
#define _SELP_3(s,v,V...) _SEP_2(s,v); DEFER2(_SELP_N_REF)()(TWO_ARGS(V),V);
#define SERIAL_ECHOLNPAIR(V...) do{ EVAL(_SELP_N(TWO_ARGS(V),V)); }while(0)
#define SERIAL_ECHOLNPGM(V...) do{ EVAL(_SELP_N(TWO_ARGS(V),V)); }while(0)
// Print up to 20 pairs of values. Odd elements must be PSTR pointers.
#define __SEP_N_P(N,V...) _SEP_##N##_P(V)
#define _SEP_N_P(N,V...) __SEP_N_P(N,V)
#define _SEP_N_P_REF() _SEP_N_P
#define _SEP_1_P(s) serialprintPGM(s);
#define _SEP_2_P(s,v) serial_echopair_PGM(s,v);
#define _SEP_3_P(s,v,V...) _SEP_2_P(s,v); DEFER2(_SEP_N_P_REF)()(TWO_ARGS(V),V);
#define SERIAL_ECHOPAIR_P(V...) do{ EVAL(_SEP_N_P(TWO_ARGS(V),V)); }while(0)
#define _SEP_1_P(p) serialprintPGM(p);
#define _SEP_2_P(p,v) serial_echopair_PGM(p,v);
#define _SEP_3_P(p,v,V...) _SEP_2_P(p,v); DEFER2(_SEP_N_P_REF)()(TWO_ARGS(V),V);
#define SERIAL_ECHOPGM_P(V...) do{ EVAL(_SEP_N_P(TWO_ARGS(V),V)); }while(0)
// Print up to 20 pairs of values followed by newline. Odd elements must be PSTR pointers.
#define __SELP_N_P(N,V...) _SELP_##N##_P(V)
#define _SELP_N_P(N,V...) __SELP_N_P(N,V)
#define _SELP_N_P_REF() _SELP_N_P
#define _SELP_1_P(s) { serialprintPGM(s); SERIAL_EOL(); }
#define _SELP_2_P(s,v) { serial_echopair_PGM(s,v); SERIAL_EOL(); }
#define _SELP_3_P(s,v,V...) { _SEP_2_P(s,v); DEFER2(_SELP_N_P_REF)()(TWO_ARGS(V),V); }
#define SERIAL_ECHOLNPAIR_P(V...) do{ EVAL(_SELP_N_P(TWO_ARGS(V),V)); }while(0)
#define _SELP_1_P(p) { serialprintPGM(p); SERIAL_EOL(); }
#define _SELP_2_P(p,v) { serial_echopair_PGM(p,v); SERIAL_EOL(); }
#define _SELP_3_P(p,v,V...) { _SEP_2_P(p,v); DEFER2(_SELP_N_P_REF)()(TWO_ARGS(V),V); }
#define SERIAL_ECHOLNPGM_P(V...) do{ EVAL(_SELP_N_P(TWO_ARGS(V),V)); }while(0)
#ifdef AllowDifferentTypeInList
@ -261,12 +261,6 @@ void serialprintPGM(PGM_P str);
#endif
#define SERIAL_ECHOPGM_P(P) (serialprintPGM(P))
#define SERIAL_ECHOLNPGM_P(P) do{ serialprintPGM(P); SERIAL_EOL(); }while(0)
#define SERIAL_ECHOPGM(S) (serialprintPGM(PSTR(S)))
#define SERIAL_ECHOLNPGM(S) (serialprintPGM(PSTR(S "\n")))
#define SERIAL_ECHOPAIR_F_P(P,V...) do{ serialprintPGM(P); SERIAL_ECHO_F(V); }while(0)
#define SERIAL_ECHOLNPAIR_F_P(V...) do{ SERIAL_ECHOPAIR_F_P(V); SERIAL_EOL(); }while(0)
@ -277,8 +271,8 @@ void serialprintPGM(PGM_P str);
#define SERIAL_ERROR_START() serial_error_start()
#define SERIAL_EOL() SERIAL_CHAR('\n')
#define SERIAL_ECHO_MSG(V...) do{ SERIAL_ECHO_START(); SERIAL_ECHOLNPAIR(V); }while(0)
#define SERIAL_ERROR_MSG(V...) do{ SERIAL_ERROR_START(); SERIAL_ECHOLNPAIR(V); }while(0)
#define SERIAL_ECHO_MSG(V...) do{ SERIAL_ECHO_START(); SERIAL_ECHOLNPGM(V); }while(0)
#define SERIAL_ERROR_MSG(V...) do{ SERIAL_ERROR_START(); SERIAL_ECHOLNPGM(V); }while(0)
#define SERIAL_ECHO_SP(C) serial_spaces(C)

12
Marlin/src/core/utility.cpp
View file

@ -79,9 +79,9 @@ void safe_delay(millis_t ms) {
#if HAS_BED_PROBE
#if !HAS_PROBE_XY_OFFSET
SERIAL_ECHOPAIR("Probe Offset X0 Y0 Z", probe.offset.z, " (");
SERIAL_ECHOPGM("Probe Offset X0 Y0 Z", probe.offset.z, " (");
#else
SERIAL_ECHOPAIR_P(PSTR("Probe Offset X"), probe.offset_xy.x, SP_Y_STR, probe.offset_xy.y, SP_Z_STR, probe.offset.z);
SERIAL_ECHOPGM_P(PSTR("Probe Offset X"), probe.offset_xy.x, SP_Y_STR, probe.offset_xy.y, SP_Z_STR, probe.offset.z);
if (probe.offset_xy.x > 0)
SERIAL_ECHOPGM(" (Right");
else if (probe.offset_xy.x < 0)
@ -119,7 +119,7 @@ void safe_delay(millis_t ms) {
SERIAL_ECHOLNPGM(" (enabled)");
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
if (planner.z_fade_height)
SERIAL_ECHOLNPAIR("Z Fade: ", planner.z_fade_height);
SERIAL_ECHOLNPGM("Z Fade: ", planner.z_fade_height);
#endif
#if ABL_PLANAR
SERIAL_ECHOPGM("ABL Adjustment");
@ -140,7 +140,7 @@ void safe_delay(millis_t ms) {
SERIAL_ECHO(ftostr43sign(rz, '+'));
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
if (planner.z_fade_height) {
SERIAL_ECHOPAIR(" (", ftostr43sign(rz * planner.fade_scaling_factor_for_z(current_position.z), '+'));
SERIAL_ECHOPGM(" (", ftostr43sign(rz * planner.fade_scaling_factor_for_z(current_position.z), '+'));
SERIAL_CHAR(')');
}
#endif
@ -156,10 +156,10 @@ void safe_delay(millis_t ms) {
SERIAL_ECHOPGM("Mesh Bed Leveling");
if (planner.leveling_active) {
SERIAL_ECHOLNPGM(" (enabled)");
SERIAL_ECHOPAIR("MBL Adjustment Z", ftostr43sign(mbl.get_z(current_position), '+'));
SERIAL_ECHOPGM("MBL Adjustment Z", ftostr43sign(mbl.get_z(current_position), '+'));
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
if (planner.z_fade_height) {
SERIAL_ECHOPAIR(" (", ftostr43sign(
SERIAL_ECHOPGM(" (", ftostr43sign(
mbl.get_z(current_position, planner.fade_scaling_factor_for_z(current_position.z)), '+'
));
SERIAL_CHAR(')');

4
Marlin/src/feature/backlash.cpp
View file

@ -134,12 +134,12 @@ void Backlash::add_correction_steps(const int32_t &da, const int32_t &db, const
switch (axis) {
case CORE_AXIS_1:
//block->steps[CORE_AXIS_2] += influence_distance_mm[axis] * planner.settings.axis_steps_per_mm[CORE_AXIS_2];
//SERIAL_ECHOLNPAIR("CORE_AXIS_1 dir change. distance=", distance_mm[axis], " r.err=", residual_error[axis],
//SERIAL_ECHOLNPGM("CORE_AXIS_1 dir change. distance=", distance_mm[axis], " r.err=", residual_error[axis],
// " da=", da, " db=", db, " block->steps[axis]=", block->steps[axis], " err_corr=", error_correction);
break;
case CORE_AXIS_2:
//block->steps[CORE_AXIS_1] += influence_distance_mm[axis] * planner.settings.axis_steps_per_mm[CORE_AXIS_1];;
//SERIAL_ECHOLNPAIR("CORE_AXIS_2 dir change. distance=", distance_mm[axis], " r.err=", residual_error[axis],
//SERIAL_ECHOLNPGM("CORE_AXIS_2 dir change. distance=", distance_mm[axis], " r.err=", residual_error[axis],
// " da=", da, " db=", db, " block->steps[axis]=", block->steps[axis], " err_corr=", error_correction);
break;
case NORMAL_AXIS: break;

10
Marlin/src/feature/bedlevel/abl/abl.cpp
View file

@ -336,11 +336,11 @@ float bilinear_z_offset(const xy_pos_t &raw) {
/*
static float last_offset = 0;
if (ABS(last_offset - offset) > 0.2) {
SERIAL_ECHOLNPAIR("Sudden Shift at x=", rel.x, " / ", bilinear_grid_spacing.x, " -> thisg.x=", thisg.x);
SERIAL_ECHOLNPAIR(" y=", rel.y, " / ", bilinear_grid_spacing.y, " -> thisg.y=", thisg.y);
SERIAL_ECHOLNPAIR(" ratio.x=", ratio.x, " ratio.y=", ratio.y);
SERIAL_ECHOLNPAIR(" z1=", z1, " z2=", z2, " z3=", z3, " z4=", z4);
SERIAL_ECHOLNPAIR(" L=", L, " R=", R, " offset=", offset);
SERIAL_ECHOLNPGM("Sudden Shift at x=", rel.x, " / ", bilinear_grid_spacing.x, " -> thisg.x=", thisg.x);
SERIAL_ECHOLNPGM(" y=", rel.y, " / ", bilinear_grid_spacing.y, " -> thisg.y=", thisg.y);
SERIAL_ECHOLNPGM(" ratio.x=", ratio.x, " ratio.y=", ratio.y);
SERIAL_ECHOLNPGM(" z1=", z1, " z2=", z2, " z3=", z3, " z4=", z4);
SERIAL_ECHOLNPGM(" L=", L, " R=", R, " offset=", offset);
}
last_offset = offset;
//*/

2
Marlin/src/feature/bedlevel/ubl/ubl.cpp
View file

@ -51,7 +51,7 @@ void unified_bed_leveling::report_current_mesh() {
GRID_LOOP(x, y)
if (!isnan(z_values[x][y])) {
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(" M421 I", x, " J", y);
SERIAL_ECHOPGM(" M421 I", x, " J", y);
SERIAL_ECHOLNPAIR_F_P(SP_Z_STR, z_values[x][y], 4);
serial_delay(75); // Prevent Printrun from exploding
}

8
Marlin/src/feature/bedlevel/ubl/ubl.h
View file

@ -208,7 +208,7 @@ public:
if (DEBUGGING(LEVELING)) {
if (WITHIN(x1_i, 0, (GRID_MAX_POINTS_X) - 1)) DEBUG_ECHOPGM("yi"); else DEBUG_ECHOPGM("x1_i");
DEBUG_ECHOLNPAIR(" out of bounds in z_correction_for_x_on_horizontal_mesh_line(rx0=", rx0, ",x1_i=", x1_i, ",yi=", yi, ")");
DEBUG_ECHOLNPGM(" out of bounds in z_correction_for_x_on_horizontal_mesh_line(rx0=", rx0, ",x1_i=", x1_i, ",yi=", yi, ")");
}
// The requested location is off the mesh. Return UBL_Z_RAISE_WHEN_OFF_MESH or NAN.
@ -231,7 +231,7 @@ public:
if (DEBUGGING(LEVELING)) {
if (WITHIN(xi, 0, (GRID_MAX_POINTS_X) - 1)) DEBUG_ECHOPGM("y1_i"); else DEBUG_ECHOPGM("xi");
DEBUG_ECHOLNPAIR(" out of bounds in z_correction_for_y_on_vertical_mesh_line(ry0=", ry0, ", xi=", xi, ", y1_i=", y1_i, ")");
DEBUG_ECHOLNPGM(" out of bounds in z_correction_for_y_on_vertical_mesh_line(ry0=", ry0, ", xi=", xi, ", y1_i=", y1_i, ")");
}
// The requested location is off the mesh. Return UBL_Z_RAISE_WHEN_OFF_MESH or NAN.
@ -275,11 +275,11 @@ public:
// because part of the Mesh is undefined and we don't have the
// information we need to complete the height correction.
if (DEBUGGING(MESH_ADJUST)) DEBUG_ECHOLNPAIR("??? Yikes! NAN in ");
if (DEBUGGING(MESH_ADJUST)) DEBUG_ECHOLNPGM("??? Yikes! NAN in ");
}
if (DEBUGGING(MESH_ADJUST)) {
DEBUG_ECHOPAIR("get_z_correction(", rx0, ", ", ry0);
DEBUG_ECHOPGM("get_z_correction(", rx0, ", ", ry0);
DEBUG_ECHOLNPAIR_F(") => ", z0, 6);
}

60
Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
View file

@ -428,7 +428,7 @@ void unified_bed_leveling::G29() {
SERIAL_ECHOLNPGM("Mesh invalidated. Probing mesh.");
}
if (param.V_verbosity > 1) {
SERIAL_ECHOPAIR("Probing around (", param.XY_pos.x);
SERIAL_ECHOPGM("Probing around (", param.XY_pos.x);
SERIAL_CHAR(',');
SERIAL_DECIMAL(param.XY_pos.y);
SERIAL_ECHOLNPGM(").\n");
@ -602,7 +602,7 @@ void unified_bed_leveling::G29() {
}
if (!WITHIN(param.KLS_storage_slot, 0, a - 1)) {
SERIAL_ECHOLNPAIR("?Invalid storage slot.\n?Use 0 to ", a - 1);
SERIAL_ECHOLNPGM("?Invalid storage slot.\n?Use 0 to ", a - 1);
return;
}
@ -630,7 +630,7 @@ void unified_bed_leveling::G29() {
}
if (!WITHIN(param.KLS_storage_slot, 0, a - 1)) {
SERIAL_ECHOLNPAIR("?Invalid storage slot.\n?Use 0 to ", a - 1);
SERIAL_ECHOLNPGM("?Invalid storage slot.\n?Use 0 to ", a - 1);
goto LEAVE;
}
@ -653,7 +653,7 @@ void unified_bed_leveling::G29() {
#endif
#ifdef Z_PROBE_END_SCRIPT
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("Z Probe End Script: ", Z_PROBE_END_SCRIPT);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("Z Probe End Script: ", Z_PROBE_END_SCRIPT);
if (probe_deployed) {
planner.synchronize();
gcode.process_subcommands_now_P(PSTR(Z_PROBE_END_SCRIPT));
@ -690,7 +690,7 @@ void unified_bed_leveling::adjust_mesh_to_mean(const bool cflag, const_float_t o
if (!isnan(z_values[x][y]))
sum_of_diff_squared += sq(z_values[x][y] - mean);
SERIAL_ECHOLNPAIR("# of samples: ", n);
SERIAL_ECHOLNPGM("# of samples: ", n);
SERIAL_ECHOLNPAIR_F("Mean Mesh Height: ", mean, 6);
const float sigma = SQRT(sum_of_diff_squared / (n + 1));
@ -735,7 +735,7 @@ void unified_bed_leveling::shift_mesh_height() {
if (do_ubl_mesh_map) display_map(param.T_map_type);
const uint8_t point_num = (GRID_MAX_POINTS - count) + 1;
SERIAL_ECHOLNPAIR("Probing mesh point ", point_num, "/", GRID_MAX_POINTS, ".");
SERIAL_ECHOLNPGM("Probing mesh point ", point_num, "/", GRID_MAX_POINTS, ".");
TERN_(HAS_STATUS_MESSAGE, ui.status_printf_P(0, PSTR(S_FMT " %i/%i"), GET_TEXT(MSG_PROBING_POINT), point_num, int(GRID_MAX_POINTS)));
#if HAS_LCD_MENU
@ -1450,7 +1450,7 @@ void unified_bed_leveling::smart_fill_mesh() {
#endif
if (param.V_verbosity > 3) {
serial_spaces(16);
SERIAL_ECHOLNPAIR("Corrected_Z=", measured_z);
SERIAL_ECHOLNPGM("Corrected_Z=", measured_z);
}
incremental_LSF(&lsf_results, points[0], measured_z);
}
@ -1469,7 +1469,7 @@ void unified_bed_leveling::smart_fill_mesh() {
measured_z -= get_z_correction(points[1]);
if (param.V_verbosity > 3) {
serial_spaces(16);
SERIAL_ECHOLNPAIR("Corrected_Z=", measured_z);
SERIAL_ECHOLNPGM("Corrected_Z=", measured_z);
}
incremental_LSF(&lsf_results, points[1], measured_z);
}
@ -1489,7 +1489,7 @@ void unified_bed_leveling::smart_fill_mesh() {
measured_z -= get_z_correction(points[2]);
if (param.V_verbosity > 3) {
serial_spaces(16);
SERIAL_ECHOLNPAIR("Corrected_Z=", measured_z);
SERIAL_ECHOLNPGM("Corrected_Z=", measured_z);
}
incremental_LSF(&lsf_results, points[2], measured_z);
}
@ -1517,7 +1517,7 @@ void unified_bed_leveling::smart_fill_mesh() {
rpos.y = y_min + dy * (zig_zag ? param.J_grid_size - 1 - iy : iy);
if (!abort_flag) {
SERIAL_ECHOLNPAIR("Tilting mesh point ", point_num, "/", total_points, "\n");
SERIAL_ECHOLNPGM("Tilting mesh point ", point_num, "/", total_points, "\n");
TERN_(HAS_STATUS_MESSAGE, ui.status_printf_P(0, PSTR(S_FMT " %i/%i"), GET_TEXT(MSG_LCD_TILTING_MESH), point_num, total_points));
measured_z = probe.probe_at_point(rpos, parser.seen_test('E') ? PROBE_PT_STOW : PROBE_PT_RAISE, param.V_verbosity); // TODO: Needs error handling
@ -1545,7 +1545,7 @@ void unified_bed_leveling::smart_fill_mesh() {
if (param.V_verbosity > 3) {
serial_spaces(16);
SERIAL_ECHOLNPAIR("Corrected_Z=", measured_z);
SERIAL_ECHOLNPGM("Corrected_Z=", measured_z);
}
incremental_LSF(&lsf_results, rpos, measured_z);
}
@ -1648,7 +1648,7 @@ void unified_bed_leveling::smart_fill_mesh() {
DEBUG_ECHOLNPAIR_F("0 : ", normed(safe_homing_xy, 0), 6);
d_from(); DEBUG_ECHOPGM("safe home with Z=");
DEBUG_ECHOLNPAIR_F("mesh value ", normed(safe_homing_xy, get_z_correction(safe_homing_xy)), 6);
DEBUG_ECHOPAIR(" Z error = (", Z_SAFE_HOMING_X_POINT, ",", Z_SAFE_HOMING_Y_POINT);
DEBUG_ECHOPGM(" Z error = (", Z_SAFE_HOMING_X_POINT, ",", Z_SAFE_HOMING_Y_POINT);
DEBUG_ECHOLNPAIR_F(") = ", get_z_correction(safe_homing_xy), 6);
#endif
} // DEBUGGING(LEVELING)
@ -1722,7 +1722,7 @@ void unified_bed_leveling::smart_fill_mesh() {
if (storage_slot == -1)
SERIAL_ECHOPGM("No Mesh Loaded.");
else
SERIAL_ECHOPAIR("Mesh ", storage_slot, " Loaded.");
SERIAL_ECHOPGM("Mesh ", storage_slot, " Loaded.");
SERIAL_EOL();
serial_delay(50);
@ -1736,14 +1736,14 @@ void unified_bed_leveling::smart_fill_mesh() {
SERIAL_ECHOLNPAIR_F("Probe Offset M851 Z", probe.offset.z, 7);
#endif
SERIAL_ECHOLNPAIR("MESH_MIN_X " STRINGIFY(MESH_MIN_X) "=", MESH_MIN_X); serial_delay(50);
SERIAL_ECHOLNPAIR("MESH_MIN_Y " STRINGIFY(MESH_MIN_Y) "=", MESH_MIN_Y); serial_delay(50);
SERIAL_ECHOLNPAIR("MESH_MAX_X " STRINGIFY(MESH_MAX_X) "=", MESH_MAX_X); serial_delay(50);
SERIAL_ECHOLNPAIR("MESH_MAX_Y " STRINGIFY(MESH_MAX_Y) "=", MESH_MAX_Y); serial_delay(50);
SERIAL_ECHOLNPAIR("GRID_MAX_POINTS_X ", GRID_MAX_POINTS_X); serial_delay(50);
SERIAL_ECHOLNPAIR("GRID_MAX_POINTS_Y ", GRID_MAX_POINTS_Y); serial_delay(50);
SERIAL_ECHOLNPAIR("MESH_X_DIST ", MESH_X_DIST);
SERIAL_ECHOLNPAIR("MESH_Y_DIST ", MESH_Y_DIST); serial_delay(50);
SERIAL_ECHOLNPGM("MESH_MIN_X " STRINGIFY(MESH_MIN_X) "=", MESH_MIN_X); serial_delay(50);
SERIAL_ECHOLNPGM("MESH_MIN_Y " STRINGIFY(MESH_MIN_Y) "=", MESH_MIN_Y); serial_delay(50);
SERIAL_ECHOLNPGM("MESH_MAX_X " STRINGIFY(MESH_MAX_X) "=", MESH_MAX_X); serial_delay(50);
SERIAL_ECHOLNPGM("MESH_MAX_Y " STRINGIFY(MESH_MAX_Y) "=", MESH_MAX_Y); serial_delay(50);
SERIAL_ECHOLNPGM("GRID_MAX_POINTS_X ", GRID_MAX_POINTS_X); serial_delay(50);
SERIAL_ECHOLNPGM("GRID_MAX_POINTS_Y ", GRID_MAX_POINTS_Y); serial_delay(50);
SERIAL_ECHOLNPGM("MESH_X_DIST ", MESH_X_DIST);
SERIAL_ECHOLNPGM("MESH_Y_DIST ", MESH_Y_DIST); serial_delay(50);
SERIAL_ECHOPGM("X-Axis Mesh Points at: ");
LOOP_L_N(i, GRID_MAX_POINTS_X) {
@ -1762,27 +1762,27 @@ void unified_bed_leveling::smart_fill_mesh() {
SERIAL_EOL();
#if HAS_KILL
SERIAL_ECHOLNPAIR("Kill pin on :", KILL_PIN, " state:", kill_state());
SERIAL_ECHOLNPGM("Kill pin on :", KILL_PIN, " state:", kill_state());
#endif
SERIAL_EOL();
serial_delay(50);
#if ENABLED(UBL_DEVEL_DEBUGGING)
SERIAL_ECHOLNPAIR("ubl_state_at_invocation :", ubl_state_at_invocation, "\nubl_state_recursion_chk :", ubl_state_recursion_chk);
SERIAL_ECHOLNPGM("ubl_state_at_invocation :", ubl_state_at_invocation, "\nubl_state_recursion_chk :", ubl_state_recursion_chk);
serial_delay(50);
SERIAL_ECHOLNPAIR("Meshes go from ", hex_address((void*)settings.meshes_start_index()), " to ", hex_address((void*)settings.meshes_end_index()));
SERIAL_ECHOLNPGM("Meshes go from ", hex_address((void*)settings.meshes_start_index()), " to ", hex_address((void*)settings.meshes_end_index()));
serial_delay(50);
SERIAL_ECHOLNPAIR("sizeof(ubl) : ", sizeof(ubl)); SERIAL_EOL();
SERIAL_ECHOLNPAIR("z_value[][] size: ", sizeof(z_values)); SERIAL_EOL();
SERIAL_ECHOLNPGM("sizeof(ubl) : ", sizeof(ubl)); SERIAL_EOL();
SERIAL_ECHOLNPGM("z_value[][] size: ", sizeof(z_values)); SERIAL_EOL();
serial_delay(25);
SERIAL_ECHOLNPAIR("EEPROM free for UBL: ", hex_address((void*)(settings.meshes_end_index() - settings.meshes_start_index())));
SERIAL_ECHOLNPGM("EEPROM free for UBL: ", hex_address((void*)(settings.meshes_end_index() - settings.meshes_start_index())));
serial_delay(50);
SERIAL_ECHOLNPAIR("EEPROM can hold ", settings.calc_num_meshes(), " meshes.\n");
SERIAL_ECHOLNPGM("EEPROM can hold ", settings.calc_num_meshes(), " meshes.\n");
serial_delay(25);
#endif // UBL_DEVEL_DEBUGGING
@ -1829,7 +1829,7 @@ void unified_bed_leveling::smart_fill_mesh() {
}
if (!parser.has_value() || !WITHIN(parser.value_int(), 0, a - 1)) {
SERIAL_ECHOLNPAIR("?Invalid storage slot.\n?Use 0 to ", a - 1);
SERIAL_ECHOLNPGM("?Invalid storage slot.\n?Use 0 to ", a - 1);
return;
}
@ -1838,7 +1838,7 @@ void unified_bed_leveling::smart_fill_mesh() {
float tmp_z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y];
settings.load_mesh(param.KLS_storage_slot, &tmp_z_values);
SERIAL_ECHOLNPAIR("Subtracting mesh in slot ", param.KLS_storage_slot, " from current mesh.");
SERIAL_ECHOLNPGM("Subtracting mesh in slot ", param.KLS_storage_slot, " from current mesh.");
GRID_LOOP(x, y) {
z_values[x][y] -= tmp_z_values[x][y];

14
Marlin/src/feature/binary_stream.h
View file

@ -146,9 +146,9 @@ public:
transfer_timeout = millis() + TIMEOUT;
switch (static_cast<FileTransfer>(packet_type)) {
case FileTransfer::QUERY:
SERIAL_ECHOPAIR("PFT:version:", VERSION_MAJOR, ".", VERSION_MINOR, ".", VERSION_PATCH);
SERIAL_ECHOPGM("PFT:version:", VERSION_MAJOR, ".", VERSION_MINOR, ".", VERSION_PATCH);
#if ENABLED(BINARY_STREAM_COMPRESSION)
SERIAL_ECHOLNPAIR(":compression:heatshrink,", HEATSHRINK_STATIC_WINDOW_BITS, ",", HEATSHRINK_STATIC_LOOKAHEAD_BITS);
SERIAL_ECHOLNPGM(":compression:heatshrink,", HEATSHRINK_STATIC_WINDOW_BITS, ",", HEATSHRINK_STATIC_LOOKAHEAD_BITS);
#else
SERIAL_ECHOLNPGM(":compression:none");
#endif
@ -322,7 +322,7 @@ public:
if (packet.header.checksum == packet.header_checksum) {
// The SYNC control packet is a special case in that it doesn't require the stream sync to be correct
if (static_cast<Protocol>(packet.header.protocol()) == Protocol::CONTROL && static_cast<ProtocolControl>(packet.header.type()) == ProtocolControl::SYNC) {
SERIAL_ECHOLNPAIR("ss", sync, ",", buffer_size, ",", VERSION_MAJOR, ".", VERSION_MINOR, ".", VERSION_PATCH);
SERIAL_ECHOLNPGM("ss", sync, ",", buffer_size, ",", VERSION_MAJOR, ".", VERSION_MINOR, ".", VERSION_PATCH);
stream_state = StreamState::PACKET_RESET;
break;
}
@ -337,7 +337,7 @@ public:
stream_state = StreamState::PACKET_PROCESS;
}
else if (packet.header.sync == sync - 1) { // ok response must have been lost
SERIAL_ECHOLNPAIR("ok", packet.header.sync); // transmit valid packet received and drop the payload
SERIAL_ECHOLNPGM("ok", packet.header.sync); // transmit valid packet received and drop the payload
stream_state = StreamState::PACKET_RESET;
}
else if (packet_retries) {
@ -393,7 +393,7 @@ public:
packet_retries = 0;
bytes_received += packet.header.size;
SERIAL_ECHOLNPAIR("ok", packet.header.sync); // transmit valid packet received
SERIAL_ECHOLNPGM("ok", packet.header.sync); // transmit valid packet received
dispatch();
stream_state = StreamState::PACKET_RESET;
break;
@ -402,7 +402,7 @@ public:
packet_retries++;
stream_state = StreamState::PACKET_RESET;
SERIAL_ECHO_MSG("Resend request ", packet_retries);
SERIAL_ECHOLNPAIR("rs", sync);
SERIAL_ECHOLNPGM("rs", sync);
}
else
stream_state = StreamState::PACKET_ERROR;
@ -412,7 +412,7 @@ public:
stream_state = StreamState::PACKET_RESEND;
break;
case StreamState::PACKET_ERROR:
SERIAL_ECHOLNPAIR("fe", packet.header.sync);
SERIAL_ECHOLNPGM("fe", packet.header.sync);
reset(); // reset everything, resync required
stream_state = StreamState::PACKET_RESET;
break;

8
Marlin/src/feature/bltouch.cpp
View file

@ -39,7 +39,7 @@ void stop();
#include "../core/debug_out.h"
bool BLTouch::command(const BLTCommand cmd, const millis_t &ms) {
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("BLTouch Command :", cmd);
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("BLTouch Command :", cmd);
MOVE_SERVO(Z_PROBE_SERVO_NR, cmd);
safe_delay(_MAX(ms, (uint32_t)BLTOUCH_DELAY)); // BLTOUCH_DELAY is also the *minimum* delay
return triggered();
@ -64,7 +64,7 @@ void BLTouch::init(const bool set_voltage/*=false*/) {
#else
if (DEBUGGING(LEVELING)) {
DEBUG_ECHOLNPAIR("last_written_mode - ", last_written_mode);
DEBUG_ECHOLNPGM("last_written_mode - ", last_written_mode);
DEBUG_ECHOLNPGM("config mode - "
#if ENABLED(BLTOUCH_SET_5V_MODE)
"BLTOUCH_SET_5V_MODE"
@ -175,7 +175,7 @@ bool BLTouch::status_proc() {
_set_SW_mode(); // Incidentally, _set_SW_mode() will also RESET any active alarm
const bool tr = triggered(); // If triggered in SW mode, the pin is up, it is STOWED
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("BLTouch is ", tr);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("BLTouch is ", tr);
if (tr) _stow(); else _deploy(); // Turn off SW mode, reset any trigger, honor pin state
return !tr;
@ -187,7 +187,7 @@ void BLTouch::mode_conv_proc(const bool M5V) {
* BLTOUCH V3.0: This will set the mode (twice) and sadly, a STOW is needed at the end, because of the deploy
* BLTOUCH V3.1: This will set the mode and store it in the eeprom. The STOW is not needed but does not hurt
*/
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("BLTouch Set Mode - ", M5V);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("BLTouch Set Mode - ", M5V);
_deploy();
if (M5V) _set_5V_mode(); else _set_OD_mode();
_mode_store();

8
Marlin/src/feature/dac/stepper_dac.cpp
View file

@ -85,15 +85,15 @@ void StepperDAC::print_values() {
if (!dac_present) return;
SERIAL_ECHO_MSG("Stepper current values in % (Amps):");
SERIAL_ECHO_START();
SERIAL_ECHOPAIR_P(SP_X_LBL, dac_perc(X_AXIS), PSTR(" ("), dac_amps(X_AXIS), PSTR(")"));
SERIAL_ECHOPGM_P(SP_X_LBL, dac_perc(X_AXIS), PSTR(" ("), dac_amps(X_AXIS), PSTR(")"));
#if HAS_Y_AXIS
SERIAL_ECHOPAIR_P(SP_Y_LBL, dac_perc(Y_AXIS), PSTR(" ("), dac_amps(Y_AXIS), PSTR(")"));
SERIAL_ECHOPGM_P(SP_Y_LBL, dac_perc(Y_AXIS), PSTR(" ("), dac_amps(Y_AXIS), PSTR(")"));
#endif
#if HAS_Z_AXIS
SERIAL_ECHOPAIR_P(SP_Z_LBL, dac_perc(Z_AXIS), PSTR(" ("), dac_amps(Z_AXIS), PSTR(")"));
SERIAL_ECHOPGM_P(SP_Z_LBL, dac_perc(Z_AXIS), PSTR(" ("), dac_amps(Z_AXIS), PSTR(")"));
#endif
#if HAS_EXTRUDERS
SERIAL_ECHOLNPAIR_P(SP_E_LBL, dac_perc(E_AXIS), PSTR(" ("), dac_amps(E_AXIS), PSTR(")"));
SERIAL_ECHOLNPGM_P(SP_E_LBL, dac_perc(E_AXIS), PSTR(" ("), dac_amps(E_AXIS), PSTR(")"));
#endif
}

54
Marlin/src/feature/encoder_i2c.cpp
View file

@ -49,7 +49,7 @@ void I2CPositionEncoder::init(const uint8_t address, const AxisEnum axis) {
initialized = true;
SERIAL_ECHOLNPAIR("Setting up encoder on ", AS_CHAR(axis_codes[encoderAxis]), " axis, addr = ", address);
SERIAL_ECHOLNPGM("Setting up encoder on ", AS_CHAR(axis_codes[encoderAxis]), " axis, addr = ", address);
position = get_position();
}
@ -67,7 +67,7 @@ void I2CPositionEncoder::update() {
/*
if (trusted) { //commented out as part of the note below
trusted = false;
SERIAL_ECHOLNPAIR("Fault detected on ", AS_CHAR(axis_codes[encoderAxis]), " axis encoder. Disengaging error correction until module is trusted again.");
SERIAL_ECHOLNPGM("Fault detected on ", AS_CHAR(axis_codes[encoderAxis]), " axis encoder. Disengaging error correction until module is trusted again.");
}
*/
return;
@ -92,7 +92,7 @@ void I2CPositionEncoder::update() {
if (millis() - lastErrorTime > I2CPE_TIME_TRUSTED) {
trusted = true;
SERIAL_ECHOLNPAIR("Untrusted encoder module on ", AS_CHAR(axis_codes[encoderAxis]), " axis has been fault-free for set duration, reinstating error correction.");
SERIAL_ECHOLNPGM("Untrusted encoder module on ", AS_CHAR(axis_codes[encoderAxis]), " axis has been fault-free for set duration, reinstating error correction.");
//the encoder likely lost its place when the error occurred, so we'll reset and use the printer's
//idea of where it the axis is to re-initialize
@ -103,10 +103,10 @@ void I2CPositionEncoder::update() {
zeroOffset -= (positionInTicks - get_position());
#ifdef I2CPE_DEBUG
SERIAL_ECHOLNPAIR("Current position is ", pos);
SERIAL_ECHOLNPAIR("Position in encoder ticks is ", positionInTicks);
SERIAL_ECHOLNPAIR("New zero-offset of ", zeroOffset);
SERIAL_ECHOPAIR("New position reads as ", get_position());
SERIAL_ECHOLNPGM("Current position is ", pos);
SERIAL_ECHOLNPGM("Position in encoder ticks is ", positionInTicks);
SERIAL_ECHOLNPGM("New zero-offset of ", zeroOffset);
SERIAL_ECHOPGM("New position reads as ", get_position());
SERIAL_CHAR('(');
SERIAL_DECIMAL(mm_from_count(get_position()));
SERIAL_ECHOLNPGM(")");
@ -149,12 +149,12 @@ void I2CPositionEncoder::update() {
const int32_t error = get_axis_error_steps(false);
#endif
//SERIAL_ECHOLNPAIR("Axis error steps: ", error);
//SERIAL_ECHOLNPGM("Axis error steps: ", error);
#ifdef I2CPE_ERR_THRESH_ABORT
if (ABS(error) > I2CPE_ERR_THRESH_ABORT * planner.settings.axis_steps_per_mm[encoderAxis]) {
//kill(PSTR("Significant Error"));
SERIAL_ECHOLNPAIR("Axis error over threshold, aborting!", error);
SERIAL_ECHOLNPGM("Axis error over threshold, aborting!", error);
safe_delay(5000);
}
#endif
@ -173,7 +173,7 @@ void I2CPositionEncoder::update() {
LOOP_L_N(i, I2CPE_ERR_PRST_ARRAY_SIZE) sumP += errPrst[i];
const int32_t errorP = int32_t(sumP * RECIPROCAL(I2CPE_ERR_PRST_ARRAY_SIZE));
SERIAL_CHAR(axis_codes[encoderAxis]);
SERIAL_ECHOLNPAIR(" : CORRECT ERR ", errorP * planner.steps_to_mm[encoderAxis], "mm");
SERIAL_ECHOLNPGM(" : CORRECT ERR ", errorP * planner.steps_to_mm[encoderAxis], "mm");
babystep.add_steps(encoderAxis, -LROUND(errorP));
errPrstIdx = 0;
}
@ -193,7 +193,7 @@ void I2CPositionEncoder::update() {
const millis_t ms = millis();
if (ELAPSED(ms, nextErrorCountTime)) {
SERIAL_CHAR(axis_codes[encoderAxis]);
SERIAL_ECHOLNPAIR(" : LARGE ERR ", error, "; diffSum=", diffSum);
SERIAL_ECHOLNPGM(" : LARGE ERR ", error, "; diffSum=", diffSum);
errorCount++;
nextErrorCountTime = ms + I2CPE_ERR_CNT_DEBOUNCE_MS;
}
@ -213,7 +213,7 @@ void I2CPositionEncoder::set_homed() {
#ifdef I2CPE_DEBUG
SERIAL_CHAR(axis_codes[encoderAxis]);
SERIAL_ECHOLNPAIR(" axis encoder homed, offset of ", zeroOffset, " ticks.");
SERIAL_ECHOLNPGM(" axis encoder homed, offset of ", zeroOffset, " ticks.");
#endif
}
}
@ -253,7 +253,7 @@ float I2CPositionEncoder::get_axis_error_mm(const bool report) {
if (report) {
SERIAL_CHAR(axis_codes[encoderAxis]);
SERIAL_ECHOLNPAIR(" axis target=", target, "mm; actual=", actual, "mm; err=", error, "mm");
SERIAL_ECHOLNPGM(" axis target=", target, "mm; actual=", actual, "mm; err=", error, "mm");
}
return error;
@ -288,7 +288,7 @@ int32_t I2CPositionEncoder::get_axis_error_steps(const bool report) {
if (report) {
SERIAL_CHAR(axis_codes[encoderAxis]);
SERIAL_ECHOLNPAIR(" axis target=", target, "; actual=", encoderCountInStepperTicksScaled, "; err=", error);
SERIAL_ECHOLNPGM(" axis target=", target, "; actual=", encoderCountInStepperTicksScaled, "; err=", error);
}
if (suppressOutput) {
@ -424,15 +424,15 @@ void I2CPositionEncoder::calibrate_steps_mm(const uint8_t iter) {
travelledDistance = mm_from_count(ABS(stopCount - startCount));
SERIAL_ECHOLNPAIR("Attempted travel: ", travelDistance, "mm");
SERIAL_ECHOLNPAIR(" Actual travel: ", travelledDistance, "mm");
SERIAL_ECHOLNPGM("Attempted travel: ", travelDistance, "mm");
SERIAL_ECHOLNPGM(" Actual travel: ", travelledDistance, "mm");
//Calculate new axis steps per unit
old_steps_mm = planner.settings.axis_steps_per_mm[encoderAxis];
new_steps_mm = (old_steps_mm * travelDistance) / travelledDistance;
SERIAL_ECHOLNPAIR("Old steps/mm: ", old_steps_mm);
SERIAL_ECHOLNPAIR("New steps/mm: ", new_steps_mm);
SERIAL_ECHOLNPGM("Old steps/mm: ", old_steps_mm);
SERIAL_ECHOLNPGM("New steps/mm: ", new_steps_mm);
//Save new value
planner.settings.axis_steps_per_mm[encoderAxis] = new_steps_mm;
@ -449,7 +449,7 @@ void I2CPositionEncoder::calibrate_steps_mm(const uint8_t iter) {
if (iter > 1) {
total /= (float)iter;
SERIAL_ECHOLNPAIR("Average steps/mm: ", total);
SERIAL_ECHOLNPGM("Average steps/mm: ", total);
}
ec = oldec;
@ -675,18 +675,18 @@ void I2CPositionEncodersMgr::change_module_address(const uint8_t oldaddr, const
// First check 'new' address is not in use
Wire.beginTransmission(I2C_ADDRESS(newaddr));
if (!Wire.endTransmission()) {
SERIAL_ECHOLNPAIR("?There is already a device with that address on the I2C bus! (", newaddr, ")");
SERIAL_ECHOLNPGM("?There is already a device with that address on the I2C bus! (", newaddr, ")");
return;
}
// Now check that we can find the module on the oldaddr address
Wire.beginTransmission(I2C_ADDRESS(oldaddr));
if (Wire.endTransmission()) {
SERIAL_ECHOLNPAIR("?No module detected at this address! (", oldaddr, ")");
SERIAL_ECHOLNPGM("?No module detected at this address! (", oldaddr, ")");
return;
}
SERIAL_ECHOLNPAIR("Module found at ", oldaddr, ", changing address to ", newaddr);
SERIAL_ECHOLNPGM("Module found at ", oldaddr, ", changing address to ", newaddr);
// Change the modules address
Wire.beginTransmission(I2C_ADDRESS(oldaddr));
@ -722,11 +722,11 @@ void I2CPositionEncodersMgr::report_module_firmware(const uint8_t address) {
// First check there is a module
Wire.beginTransmission(I2C_ADDRESS(address));
if (Wire.endTransmission()) {
SERIAL_ECHOLNPAIR("?No module detected at this address! (", address, ")");
SERIAL_ECHOLNPGM("?No module detected at this address! (", address, ")");
return;
}
SERIAL_ECHOLNPAIR("Requesting version info from module at address ", address, ":");
SERIAL_ECHOLNPGM("Requesting version info from module at address ", address, ":");
Wire.beginTransmission(I2C_ADDRESS(address));
Wire.write(I2CPE_SET_REPORT_MODE);
@ -773,13 +773,13 @@ int8_t I2CPositionEncodersMgr::parse() {
else if (parser.seenval('I')) {
if (!parser.has_value()) {
SERIAL_ECHOLNPAIR("?I seen, but no index specified! [0-", I2CPE_ENCODER_CNT - 1, "]");
SERIAL_ECHOLNPGM("?I seen, but no index specified! [0-", I2CPE_ENCODER_CNT - 1, "]");
return I2CPE_PARSE_ERR;
};
I2CPE_idx = parser.value_byte();
if (I2CPE_idx >= I2CPE_ENCODER_CNT) {
SERIAL_ECHOLNPAIR("?Index out of range. [0-", I2CPE_ENCODER_CNT - 1, "]");
SERIAL_ECHOLNPGM("?Index out of range. [0-", I2CPE_ENCODER_CNT - 1, "]");
return I2CPE_PARSE_ERR;
}
@ -954,7 +954,7 @@ void I2CPositionEncodersMgr::M864() {
else return;
}
SERIAL_ECHOLNPAIR("Changing module at address ", I2CPE_addr, " to address ", newAddress);
SERIAL_ECHOLNPGM("Changing module at address ", I2CPE_addr, " to address ", newAddress);
change_module_address(I2CPE_addr, newAddress);
}

12
Marlin/src/feature/encoder_i2c.h
View file

@ -236,7 +236,7 @@ class I2CPositionEncodersMgr {
static void report_status(const int8_t idx) {
CHECK_IDX();
SERIAL_ECHOLNPAIR("Encoder ", idx, ": ");
SERIAL_ECHOLNPGM("Encoder ", idx, ": ");
encoders[idx].get_raw_count();
encoders[idx].passes_test(true);
}
@ -261,32 +261,32 @@ class I2CPositionEncodersMgr {
static void report_error_count(const int8_t idx, const AxisEnum axis) {
CHECK_IDX();
SERIAL_ECHOLNPAIR("Error count on ", AS_CHAR(axis_codes[axis]), " axis is ", encoders[idx].get_error_count());
SERIAL_ECHOLNPGM("Error count on ", AS_CHAR(axis_codes[axis]), " axis is ", encoders[idx].get_error_count());
}
static void reset_error_count(const int8_t idx, const AxisEnum axis) {
CHECK_IDX();
encoders[idx].set_error_count(0);
SERIAL_ECHOLNPAIR("Error count on ", AS_CHAR(axis_codes[axis]), " axis has been reset.");
SERIAL_ECHOLNPGM("Error count on ", AS_CHAR(axis_codes[axis]), " axis has been reset.");
}
static void enable_ec(const int8_t idx, const bool enabled, const AxisEnum axis) {
CHECK_IDX();
encoders[idx].set_ec_enabled(enabled);
SERIAL_ECHOPAIR("Error correction on ", AS_CHAR(axis_codes[axis]));
SERIAL_ECHOPGM("Error correction on ", AS_CHAR(axis_codes[axis]));
SERIAL_ECHO_TERNARY(encoders[idx].get_ec_enabled(), " axis is ", "en", "dis", "abled.\n");
}
static void set_ec_threshold(const int8_t idx, const float newThreshold, const AxisEnum axis) {
CHECK_IDX();
encoders[idx].set_ec_threshold(newThreshold);
SERIAL_ECHOLNPAIR("Error correct threshold for ", AS_CHAR(axis_codes[axis]), " axis set to ", newThreshold, "mm.");
SERIAL_ECHOLNPGM("Error correct threshold for ", AS_CHAR(axis_codes[axis]), " axis set to ", newThreshold, "mm.");
}
static void get_ec_threshold(const int8_t idx, const AxisEnum axis) {
CHECK_IDX();
const float threshold = encoders[idx].get_ec_threshold();
SERIAL_ECHOLNPAIR("Error correct threshold for ", AS_CHAR(axis_codes[axis]), " axis is ", threshold, "mm.");
SERIAL_ECHOLNPGM("Error correct threshold for ", AS_CHAR(axis_codes[axis]), " axis is ", threshold, "mm.");
}
static int8_t idx_from_axis(const AxisEnum axis) {

34
Marlin/src/feature/fwretract.cpp
View file

@ -106,20 +106,20 @@ void FWRetract::retract(const bool retracting OPTARG(HAS_MULTI_EXTRUDER, bool sw
#endif
/* // debugging
SERIAL_ECHOLNPAIR(
SERIAL_ECHOLNPGM(
"retracting ", AS_DIGIT(retracting),
" swapping ", swapping,
" active extruder ", active_extruder
);
LOOP_L_N(i, EXTRUDERS) {
SERIAL_ECHOLNPAIR("retracted[", i, "] ", AS_DIGIT(retracted[i]));
SERIAL_ECHOLNPGM("retracted[", i, "] ", AS_DIGIT(retracted[i]));
#if HAS_MULTI_EXTRUDER
SERIAL_ECHOLNPAIR("retracted_swap[", i, "] ", AS_DIGIT(retracted_swap[i]));
SERIAL_ECHOLNPGM("retracted_swap[", i, "] ", AS_DIGIT(retracted_swap[i]));
#endif
}
SERIAL_ECHOLNPAIR("current_position.z ", current_position.z);
SERIAL_ECHOLNPAIR("current_position.e ", current_position.e);
SERIAL_ECHOLNPAIR("current_hop ", current_hop);
SERIAL_ECHOLNPGM("current_position.z ", current_position.z);
SERIAL_ECHOLNPGM("current_position.e ", current_position.e);
SERIAL_ECHOLNPGM("current_hop ", current_hop);
//*/
const float base_retract = TERN1(RETRACT_SYNC_MIXING, (MIXING_STEPPERS))
@ -181,18 +181,18 @@ void FWRetract::retract(const bool retracting OPTARG(HAS_MULTI_EXTRUDER, bool sw
#endif
/* // debugging
SERIAL_ECHOLNPAIR("retracting ", AS_DIGIT(retracting));
SERIAL_ECHOLNPAIR("swapping ", AS_DIGIT(swapping));
SERIAL_ECHOLNPAIR("active_extruder ", active_extruder);
SERIAL_ECHOLNPGM("retracting ", AS_DIGIT(retracting));
SERIAL_ECHOLNPGM("swapping ", AS_DIGIT(swapping));
SERIAL_ECHOLNPGM("active_extruder ", active_extruder);
LOOP_L_N(i, EXTRUDERS) {
SERIAL_ECHOLNPAIR("retracted[", i, "] ", AS_DIGIT(retracted[i]));
SERIAL_ECHOLNPGM("retracted[", i, "] ", AS_DIGIT(retracted[i]));
#if HAS_MULTI_EXTRUDER
SERIAL_ECHOLNPAIR("retracted_swap[", i, "] ", AS_DIGIT(retracted_swap[i]));
SERIAL_ECHOLNPGM("retracted_swap[", i, "] ", AS_DIGIT(retracted_swap[i]));
#endif
}
SERIAL_ECHOLNPAIR("current_position.z ", current_position.z);
SERIAL_ECHOLNPAIR("current_position.e ", current_position.e);
SERIAL_ECHOLNPAIR("current_hop ", current_hop);
SERIAL_ECHOLNPGM("current_position.z ", current_position.z);
SERIAL_ECHOLNPGM("current_position.e ", current_position.e);
SERIAL_ECHOLNPGM("current_hop ", current_hop);
//*/
}
@ -215,7 +215,7 @@ void FWRetract::M207() {
}
void FWRetract::M207_report() {
SERIAL_ECHOLNPAIR_P(
SERIAL_ECHOLNPGM_P(
PSTR(" M207 S"), LINEAR_UNIT(settings.retract_length)
, PSTR(" W"), LINEAR_UNIT(settings.swap_retract_length)
, PSTR(" F"), LINEAR_UNIT(MMS_TO_MMM(settings.retract_feedrate_mm_s))
@ -240,7 +240,7 @@ void FWRetract::M208() {
}
void FWRetract::M208_report() {
SERIAL_ECHOLNPAIR(
SERIAL_ECHOLNPGM(
" M208 S", LINEAR_UNIT(settings.retract_recover_extra)
, " W", LINEAR_UNIT(settings.swap_retract_recover_extra)
, " F", LINEAR_UNIT(MMS_TO_MMM(settings.retract_recover_feedrate_mm_s))
@ -261,7 +261,7 @@ void FWRetract::M208_report() {
}
void FWRetract::M209_report() {
SERIAL_ECHOLNPAIR(" M209 S", AS_DIGIT(autoretract_enabled));
SERIAL_ECHOLNPGM(" M209 S", AS_DIGIT(autoretract_enabled));
}
#endif // FWRETRACT_AUTORETRACT

6
Marlin/src/feature/joystick.cpp
View file

@ -68,13 +68,13 @@ Joystick joystick;
void Joystick::report() {
SERIAL_ECHOPGM("Joystick");
#if HAS_JOY_ADC_X
SERIAL_ECHOPAIR_P(SP_X_STR, JOY_X(x.raw));
SERIAL_ECHOPGM_P(SP_X_STR, JOY_X(x.raw));
#endif
#if HAS_JOY_ADC_Y
SERIAL_ECHOPAIR_P(SP_Y_STR, JOY_Y(y.raw));
SERIAL_ECHOPGM_P(SP_Y_STR, JOY_Y(y.raw));
#endif
#if HAS_JOY_ADC_Z
SERIAL_ECHOPAIR_P(SP_Z_STR, JOY_Z(z.raw));
SERIAL_ECHOPGM_P(SP_Z_STR, JOY_Z(z.raw));
#endif
#if HAS_JOY_ADC_EN
SERIAL_ECHO_TERNARY(READ(JOY_EN_PIN), " EN=", "HIGH (dis", "LOW (en", "abled)");

2
Marlin/src/feature/max7219.cpp
View file

@ -130,7 +130,7 @@ void Max7219::error(const char * const func, const int32_t v1, const int32_t v2/
SERIAL_ECHOPGM_P(func);
SERIAL_CHAR('(');
SERIAL_ECHO(v1);
if (v2 > 0) SERIAL_ECHOPAIR(", ", v2);
if (v2 > 0) SERIAL_ECHOPGM(", ", v2);
SERIAL_CHAR(')');
SERIAL_EOL();
#else

2
Marlin/src/feature/meatpack.cpp
View file

@ -140,7 +140,7 @@ void MeatPack::handle_output_char(const uint8_t c) {
#if ENABLED(MP_DEBUG)
if (chars_decoded < 1024) {
++chars_decoded;
DEBUG_ECHOLNPAIR("RB: ", AS_CHAR(c));
DEBUG_ECHOLNPGM("RB: ", AS_CHAR(c));
}
#endif
}

4
Marlin/src/feature/mixing.cpp
View file

@ -154,11 +154,11 @@ void Mixer::refresh_collector(const float proportion/*=1.0*/, const uint8_t t/*=
cmax = _MAX(cmax, v);
csum += v;
}
//SERIAL_ECHOPAIR("Mixer::refresh_collector(", proportion, ", ", t, ") cmax=", cmax, " csum=", csum, " color");
//SERIAL_ECHOPGM("Mixer::refresh_collector(", proportion, ", ", t, ") cmax=", cmax, " csum=", csum, " color");
const float inv_prop = proportion / csum;
MIXER_STEPPER_LOOP(i) {
c[i] = color[t][i] * inv_prop;
//SERIAL_ECHOPAIR(" [", t, "][", i, "] = ", color[t][i], " (", c[i], ") ");
//SERIAL_ECHOPGM(" [", t, "][", i, "] = ", color[t][i], " (", c[i], ") ");
}
//SERIAL_EOL();
}

2
Marlin/src/feature/mixing.h
View file

@ -152,7 +152,7 @@ class Mixer {
MIXER_STEPPER_LOOP(i) mix[i] = mixer_perc_t(100.0f * color[j][i] / ctot);
#ifdef MIXER_NORMALIZER_DEBUG
SERIAL_ECHOPAIR("V-tool ", j, " [ ");
SERIAL_ECHOPGM("V-tool ", j, " [ ");
SERIAL_ECHOLIST_N(MIXING_STEPPERS, color[j][0], color[j][1], color[j][2], color[j][3], color[j][4], color[j][5]);
SERIAL_ECHOPGM(" ] to Mix [ ");
SERIAL_ECHOLIST_N(MIXING_STEPPERS, mix[0], mix[1], mix[2], mix[3], mix[4], mix[5]);

18
Marlin/src/feature/mmu/mmu2.cpp
View file

@ -169,7 +169,7 @@ void MMU2::mmu_loop() {
if (rx_ok()) {
sscanf(rx_buffer, "%huok\n", &version);
DEBUG_ECHOLNPAIR("MMU => ", version, "\nMMU <= 'S2'");
DEBUG_ECHOLNPGM("MMU => ", version, "\nMMU <= 'S2'");
MMU2_COMMAND("S2"); // Read Build Number
state = -3;
@ -180,7 +180,7 @@ void MMU2::mmu_loop() {
if (rx_ok()) {
sscanf(rx_buffer, "%huok\n", &buildnr);
DEBUG_ECHOLNPAIR("MMU => ", buildnr);
DEBUG_ECHOLNPGM("MMU => ", buildnr);
check_version();
@ -217,7 +217,7 @@ void MMU2::mmu_loop() {
if (rx_ok()) {
sscanf(rx_buffer, "%hhuok\n", &finda);
DEBUG_ECHOLNPAIR("MMU => ", finda, "\nMMU - ENABLED");
DEBUG_ECHOLNPGM("MMU => ", finda, "\nMMU - ENABLED");
_enabled = true;
state = 1;
@ -230,7 +230,7 @@ void MMU2::mmu_loop() {
if (WITHIN(cmd, MMU_CMD_T0, MMU_CMD_T0 + EXTRUDERS - 1)) {
// tool change
int filament = cmd - MMU_CMD_T0;
DEBUG_ECHOLNPAIR("MMU <= T", filament);
DEBUG_ECHOLNPGM("MMU <= T", filament);
tx_printf_P(PSTR("T%d\n"), filament);
TERN_(MMU_EXTRUDER_SENSOR, mmu_idl_sens = 1); // enable idler sensor, if any
state = 3; // wait for response
@ -238,7 +238,7 @@ void MMU2::mmu_loop() {
else if (WITHIN(cmd, MMU_CMD_L0, MMU_CMD_L0 + EXTRUDERS - 1)) {
// load
int filament = cmd - MMU_CMD_L0;
DEBUG_ECHOLNPAIR("MMU <= L", filament);
DEBUG_ECHOLNPGM("MMU <= L", filament);
tx_printf_P(PSTR("L%d\n"), filament);
state = 3; // wait for response
}
@ -258,7 +258,7 @@ void MMU2::mmu_loop() {
else if (WITHIN(cmd, MMU_CMD_E0, MMU_CMD_E0 + EXTRUDERS - 1)) {
// eject filament
int filament = cmd - MMU_CMD_E0;
DEBUG_ECHOLNPAIR("MMU <= E", filament);
DEBUG_ECHOLNPGM("MMU <= E", filament);
tx_printf_P(PSTR("E%d\n"), filament);
state = 3; // wait for response
}
@ -271,7 +271,7 @@ void MMU2::mmu_loop() {
else if (WITHIN(cmd, MMU_CMD_F0, MMU_CMD_F0 + EXTRUDERS - 1)) {
// filament type
int filament = cmd - MMU_CMD_F0;
DEBUG_ECHOLNPAIR("MMU <= F", filament, " ", cmd_arg);
DEBUG_ECHOLNPGM("MMU <= F", filament, " ", cmd_arg);
tx_printf_P(PSTR("F%d %d\n"), filament, cmd_arg);
state = 3; // wait for response
}
@ -647,7 +647,7 @@ static void mmu2_not_responding() {
void MMU2::mmu_continue_loading() {
for (uint8_t i = 0; i < MMU_LOADING_ATTEMPTS_NR; i++) {
DEBUG_ECHOLNPAIR("Additional load attempt #", i);
DEBUG_ECHOLNPGM("Additional load attempt #", i);
if (FILAMENT_PRESENT()) break;
command(MMU_CMD_C0);
manage_response(true, true);
@ -1025,7 +1025,7 @@ void MMU2::execute_extruder_sequence(const E_Step * sequence, int steps) {
const feedRate_t fr_mm_m = pgm_read_float(&(step->feedRate));
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("E step ", es, "/", fr_mm_m);
DEBUG_ECHOLNPGM("E step ", es, "/", fr_mm_m);
current_position.e += es;
line_to_current_position(MMM_TO_MMS(fr_mm_m));

18
Marlin/src/feature/pause.cpp
View file

@ -132,7 +132,7 @@ fil_change_settings_t fc_settings[EXTRUDERS];
*/
static bool ensure_safe_temperature(const bool wait=true, const PauseMode mode=PAUSE_MODE_SAME) {
DEBUG_SECTION(est, "ensure_safe_temperature", true);
DEBUG_ECHOLNPAIR("... wait:", wait, " mode:", mode);
DEBUG_ECHOLNPGM("... wait:", wait, " mode:", mode);
#if ENABLED(PREVENT_COLD_EXTRUSION)
if (!DEBUGGING(DRYRUN) && thermalManager.targetTooColdToExtrude(active_extruder))
@ -178,7 +178,7 @@ bool load_filament(const_float_t slow_load_length/*=0*/, const_float_t fast_load
DXC_ARGS
) {
DEBUG_SECTION(lf, "load_filament", true);
DEBUG_ECHOLNPAIR("... slowlen:", slow_load_length, " fastlen:", fast_load_length, " purgelen:", purge_length, " maxbeep:", max_beep_count, " showlcd:", show_lcd, " pauseforuser:", pause_for_user, " pausemode:", mode DXC_SAY);
DEBUG_ECHOLNPGM("... slowlen:", slow_load_length, " fastlen:", fast_load_length, " purgelen:", purge_length, " maxbeep:", max_beep_count, " showlcd:", show_lcd, " pauseforuser:", pause_for_user, " pausemode:", mode DXC_SAY);
if (!ensure_safe_temperature(false, mode)) {
if (show_lcd) ui.pause_show_message(PAUSE_MESSAGE_STATUS, mode);
@ -315,7 +315,7 @@ bool unload_filament(const_float_t unload_length, const bool show_lcd/*=false*/,
#endif
) {
DEBUG_SECTION(uf, "unload_filament", true);
DEBUG_ECHOLNPAIR("... unloadlen:", unload_length, " showlcd:", show_lcd, " mode:", mode
DEBUG_ECHOLNPGM("... unloadlen:", unload_length, " showlcd:", show_lcd, " mode:", mode
#if BOTH(FILAMENT_UNLOAD_ALL_EXTRUDERS, MIXING_EXTRUDER)
, " mixmult:", mix_multiplier
#endif
@ -379,7 +379,7 @@ uint8_t did_pause_print = 0;
bool pause_print(const_float_t retract, const xyz_pos_t &park_point, const bool show_lcd/*=false*/, const_float_t unload_length/*=0*/ DXC_ARGS) {
DEBUG_SECTION(pp, "pause_print", true);
DEBUG_ECHOLNPAIR("... park.x:", park_point.x, " y:", park_point.y, " z:", park_point.z, " unloadlen:", unload_length, " showlcd:", show_lcd DXC_SAY);
DEBUG_ECHOLNPGM("... park.x:", park_point.x, " y:", park_point.y, " z:", park_point.z, " unloadlen:", unload_length, " showlcd:", show_lcd DXC_SAY);
UNUSED(show_lcd);
@ -430,7 +430,7 @@ bool pause_print(const_float_t retract, const xyz_pos_t &park_point, const bool
// Initial retract before move to filament change position
if (retract && thermalManager.hotEnoughToExtrude(active_extruder)) {
DEBUG_ECHOLNPAIR("... retract:", retract);
DEBUG_ECHOLNPGM("... retract:", retract);
unscaled_e_move(retract, PAUSE_PARK_RETRACT_FEEDRATE);
}
@ -472,7 +472,7 @@ bool pause_print(const_float_t retract, const xyz_pos_t &park_point, const bool
void show_continue_prompt(const bool is_reload) {
DEBUG_SECTION(scp, "pause_print", true);
DEBUG_ECHOLNPAIR("... is_reload:", is_reload);
DEBUG_ECHOLNPGM("... is_reload:", is_reload);
ui.pause_show_message(is_reload ? PAUSE_MESSAGE_INSERT : PAUSE_MESSAGE_WAITING);
SERIAL_ECHO_START();
@ -481,7 +481,7 @@ void show_continue_prompt(const bool is_reload) {
void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep_count/*=0*/ DXC_ARGS) {
DEBUG_SECTION(wfc, "wait_for_confirmation", true);
DEBUG_ECHOLNPAIR("... is_reload:", is_reload, " maxbeep:", max_beep_count DXC_SAY);
DEBUG_ECHOLNPGM("... is_reload:", is_reload, " maxbeep:", max_beep_count DXC_SAY);
bool nozzle_timed_out = false;
@ -584,10 +584,10 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
*/
void resume_print(const_float_t slow_load_length/*=0*/, const_float_t fast_load_length/*=0*/, const_float_t purge_length/*=ADVANCED_PAUSE_PURGE_LENGTH*/, const int8_t max_beep_count/*=0*/, const celsius_t targetTemp/*=0*/ DXC_ARGS) {
DEBUG_SECTION(rp, "resume_print", true);
DEBUG_ECHOLNPAIR("... slowlen:", slow_load_length, " fastlen:", fast_load_length, " purgelen:", purge_length, " maxbeep:", max_beep_count, " targetTemp:", targetTemp DXC_SAY);
DEBUG_ECHOLNPGM("... slowlen:", slow_load_length, " fastlen:", fast_load_length, " purgelen:", purge_length, " maxbeep:", max_beep_count, " targetTemp:", targetTemp DXC_SAY);
/*
SERIAL_ECHOLNPAIR(
SERIAL_ECHOLNPGM(
"start of resume_print()\ndual_x_carriage_mode:", dual_x_carriage_mode,
"\nextruder_duplication_enabled:", extruder_duplication_enabled,
"\nactive_extruder:", active_extruder,

34
Marlin/src/feature/powerloss.cpp
View file

@ -577,7 +577,7 @@ void PrintJobRecovery::resume() {
void PrintJobRecovery::debug(PGM_P const prefix) {
DEBUG_ECHOPGM_P(prefix);
DEBUG_ECHOLNPAIR(" Job Recovery Info...\nvalid_head:", info.valid_head, " valid_foot:", info.valid_foot);
DEBUG_ECHOLNPGM(" Job Recovery Info...\nvalid_head:", info.valid_head, " valid_foot:", info.valid_foot);
if (info.valid_head) {
if (info.valid_head == info.valid_foot) {
DEBUG_ECHOPGM("current_position: ");
@ -587,14 +587,14 @@ void PrintJobRecovery::resume() {
}
DEBUG_EOL();
DEBUG_ECHOLNPAIR("feedrate: ", info.feedrate);
DEBUG_ECHOLNPGM("feedrate: ", info.feedrate);
DEBUG_ECHOLNPAIR("zraise: ", info.zraise, " ", info.flag.raised ? "(before)" : "");
DEBUG_ECHOLNPGM("zraise: ", info.zraise, " ", info.flag.raised ? "(before)" : "");
#if ENABLED(GCODE_REPEAT_MARKERS)
DEBUG_ECHOLNPAIR("repeat index: ", info.stored_repeat.index);
DEBUG_ECHOLNPGM("repeat index: ", info.stored_repeat.index);
LOOP_L_N(i, info.stored_repeat.index)
DEBUG_ECHOLNPAIR("..... sdpos: ", info.stored_repeat.marker.sdpos, " count: ", info.stored_repeat.marker.counter);
DEBUG_ECHOLNPGM("..... sdpos: ", info.stored_repeat.marker.sdpos, " count: ", info.stored_repeat.marker.counter);
#endif
#if HAS_HOME_OFFSET
@ -616,12 +616,12 @@ void PrintJobRecovery::resume() {
#endif
#if HAS_MULTI_EXTRUDER
DEBUG_ECHOLNPAIR("active_extruder: ", info.active_extruder);
DEBUG_ECHOLNPGM("active_extruder: ", info.active_extruder);
#endif
#if DISABLED(NO_VOLUMETRICS)
DEBUG_ECHOPGM("filament_size:");
LOOP_L_N(i, EXTRUDERS) DEBUG_ECHOLNPAIR(" ", info.filament_size[i]);
LOOP_L_N(i, EXTRUDERS) DEBUG_ECHOLNPGM(" ", info.filament_size[i]);
DEBUG_EOL();
#endif
@ -635,7 +635,7 @@ void PrintJobRecovery::resume() {
#endif
#if HAS_HEATED_BED
DEBUG_ECHOLNPAIR("target_temperature_bed: ", info.target_temperature_bed);
DEBUG_ECHOLNPGM("target_temperature_bed: ", info.target_temperature_bed);
#endif
#if HAS_FAN
@ -648,7 +648,7 @@ void PrintJobRecovery::resume() {
#endif
#if HAS_LEVELING
DEBUG_ECHOLNPAIR("leveling: ", info.flag.leveling ? "ON" : "OFF", " fade: ", info.fade);
DEBUG_ECHOLNPGM("leveling: ", info.flag.leveling ? "ON" : "OFF", " fade: ", info.fade);
#endif
#if ENABLED(FWRETRACT)
@ -658,17 +658,17 @@ void PrintJobRecovery::resume() {
if (e < EXTRUDERS - 1) DEBUG_CHAR(',');
}
DEBUG_EOL();
DEBUG_ECHOLNPAIR("retract_hop: ", info.retract_hop);
DEBUG_ECHOLNPGM("retract_hop: ", info.retract_hop);
#endif
// Mixing extruder and gradient
#if BOTH(MIXING_EXTRUDER, GRADIENT_MIX)
DEBUG_ECHOLNPAIR("gradient: ", info.gradient.enabled ? "ON" : "OFF");
DEBUG_ECHOLNPGM("gradient: ", info.gradient.enabled ? "ON" : "OFF");
#endif
DEBUG_ECHOLNPAIR("sd_filename: ", info.sd_filename);
DEBUG_ECHOLNPAIR("sdpos: ", info.sdpos);
DEBUG_ECHOLNPAIR("print_job_elapsed: ", info.print_job_elapsed);
DEBUG_ECHOLNPGM("sd_filename: ", info.sd_filename);
DEBUG_ECHOLNPGM("sdpos: ", info.sdpos);
DEBUG_ECHOLNPGM("print_job_elapsed: ", info.print_job_elapsed);
DEBUG_ECHOPGM("axis_relative:");
if (TEST(info.axis_relative, REL_X)) DEBUG_ECHOPGM(" REL_X");
@ -679,9 +679,9 @@ void PrintJobRecovery::resume() {
if (TEST(info.axis_relative, E_MODE_REL)) DEBUG_ECHOPGM(" E_MODE_REL");
DEBUG_EOL();
DEBUG_ECHOLNPAIR("flag.dryrun: ", AS_DIGIT(info.flag.dryrun));
DEBUG_ECHOLNPAIR("flag.allow_cold_extrusion: ", AS_DIGIT(info.flag.allow_cold_extrusion));
DEBUG_ECHOLNPAIR("flag.volumetric_enabled: ", AS_DIGIT(info.flag.volumetric_enabled));
DEBUG_ECHOLNPGM("flag.dryrun: ", AS_DIGIT(info.flag.dryrun));
DEBUG_ECHOLNPGM("flag.allow_cold_extrusion: ", AS_DIGIT(info.flag.allow_cold_extrusion));
DEBUG_ECHOLNPGM("flag.volumetric_enabled: ", AS_DIGIT(info.flag.volumetric_enabled));
}
else
DEBUG_ECHOLNPGM("INVALID DATA");

4
Marlin/src/feature/probe_temp_comp.cpp
View file

@ -75,7 +75,7 @@ void ProbeTempComp::print_offsets() {
#endif
PSTR("Probe")
);
SERIAL_ECHOLNPAIR(
SERIAL_ECHOLNPGM(
" temp: ", temp,
"C; Offset: ", i < 0 ? 0.0f : sensor_z_offsets[s][i], " um"
);
@ -117,7 +117,7 @@ bool ProbeTempComp::finish_calibration(const TempSensorID tsi) {
// Extrapolate
float k, d;
if (calib_idx < measurements) {
SERIAL_ECHOLNPAIR("Got ", calib_idx, " measurements. ");
SERIAL_ECHOLNPGM("Got ", calib_idx, " measurements. ");
if (linear_regression(tsi, k, d)) {
SERIAL_ECHOPGM("Applying linear extrapolation");
calib_idx--;

8
Marlin/src/feature/repeat.cpp
View file

@ -43,7 +43,7 @@ void Repeat::add_marker(const uint32_t sdpos, const uint16_t count) {
marker[index].sdpos = sdpos;
marker[index].counter = count ?: -1;
index++;
DEBUG_ECHOLNPAIR("Add Marker ", index, " at ", sdpos, " (", count, ")");
DEBUG_ECHOLNPGM("Add Marker ", index, " at ", sdpos, " (", count, ")");
}
}
@ -53,14 +53,14 @@ void Repeat::loop() {
else {
const uint8_t ind = index - 1; // Active marker's index
if (!marker[ind].counter) { // Did its counter run out?
DEBUG_ECHOLNPAIR("Pass Marker ", index);
DEBUG_ECHOLNPGM("Pass Marker ", index);
index--; // Carry on. Previous marker on the next 'M808'.
}
else {
card.setIndex(marker[ind].sdpos); // Loop back to the marker.
if (marker[ind].counter > 0) // Ignore a negative (or zero) counter.
--marker[ind].counter; // Decrement the counter. If zero this 'M808' will be skipped next time.
DEBUG_ECHOLNPAIR("Goto Marker ", index, " at ", marker[ind].sdpos, " (", marker[ind].counter, ")");
DEBUG_ECHOLNPGM("Goto Marker ", index, " at ", marker[ind].sdpos, " (", marker[ind].counter, ")");
}
}
}
@ -69,7 +69,7 @@ void Repeat::cancel() { LOOP_L_N(i, index) marker[i].counter = 0; }
void Repeat::early_parse_M808(char * const cmd) {
if (is_command_M808(cmd)) {
DEBUG_ECHOLNPAIR("Parsing \"", cmd, "\"");
DEBUG_ECHOLNPGM("Parsing \"", cmd, "\"");
parser.parse(cmd);
if (parser.seen('L'))
add_marker(card.getIndex(), parser.value_ushort());

2
Marlin/src/feature/runout.cpp
View file

@ -132,7 +132,7 @@ void event_filament_runout(const uint8_t extruder) {
char script[strlen(FILAMENT_RUNOUT_SCRIPT) + 1];
sprintf_P(script, PSTR(FILAMENT_RUNOUT_SCRIPT), tool);
#if ENABLED(FILAMENT_RUNOUT_SENSOR_DEBUG)
SERIAL_ECHOLNPAIR("Runout Command: ", script);
SERIAL_ECHOLNPGM("Runout Command: ", script);
#endif
queue.inject(script);
#else

6
Marlin/src/feature/runout.h
View file

@ -145,7 +145,7 @@ class TFilamentMonitor : public FilamentMonitorBase {
if (runout_flags) {
SERIAL_ECHOPGM("Runout Sensors: ");
LOOP_L_N(i, 8) SERIAL_ECHO('0' + TEST(runout_flags, i));
SERIAL_ECHOPAIR(" -> ", extruder);
SERIAL_ECHOPGM(" -> ", extruder);
if (ran_out) SERIAL_ECHOPGM(" RUN OUT");
SERIAL_EOL();
}
@ -317,7 +317,7 @@ class FilamentSensorBase {
static uint8_t was_out; // = 0
if (out != TEST(was_out, s)) {
TBI(was_out, s);
SERIAL_ECHOLNPAIR_P(PSTR("Filament Sensor "), '0' + s, out ? PSTR(" OUT") : PSTR(" IN"));
SERIAL_ECHOLNPGM_P(PSTR("Filament Sensor "), '0' + s, out ? PSTR(" OUT") : PSTR(" IN"));
}
#endif
}
@ -352,7 +352,7 @@ class FilamentSensorBase {
if (ELAPSED(ms, t)) {
t = millis() + 1000UL;
LOOP_L_N(i, NUM_RUNOUT_SENSORS)
SERIAL_ECHOPAIR_P(i ? PSTR(", ") : PSTR("Remaining mm: "), runout_mm_countdown[i]);
SERIAL_ECHOPGM_P(i ? PSTR(", ") : PSTR("Remaining mm: "), runout_mm_countdown[i]);
SERIAL_EOL();
}
#endif

4
Marlin/src/feature/tmc_util.cpp
View file

@ -226,7 +226,7 @@
SERIAL_ECHO(timestamp);
SERIAL_ECHOPGM(": ");
st.printLabel();
SERIAL_ECHOLNPAIR(" driver overtemperature warning! (", st.getMilliamps(), "mA)");
SERIAL_ECHOLNPGM(" driver overtemperature warning! (", st.getMilliamps(), "mA)");
}
template<typename TMC>
@ -271,7 +271,7 @@
st.rms_current(I_rms);
#if ENABLED(REPORT_CURRENT_CHANGE)
st.printLabel();
SERIAL_ECHOLNPAIR(" current decreased to ", I_rms);
SERIAL_ECHOLNPGM(" current decreased to ", I_rms);
#endif
}
}

4
Marlin/src/feature/tmc_util.h
View file

@ -300,7 +300,7 @@ class TMCMarlin<TMC2660Stepper, AXIS_LETTER, DRIVER_ID, AXIS_ID> : public TMC266
template<typename TMC>
void tmc_print_current(TMC &st) {
st.printLabel();
SERIAL_ECHOLNPAIR(" driver current: ", st.getMilliamps());
SERIAL_ECHOLNPGM(" driver current: ", st.getMilliamps());
}
#if ENABLED(MONITOR_DRIVER_STATUS)
@ -322,7 +322,7 @@ void tmc_print_current(TMC &st) {
template<typename TMC>
void tmc_print_pwmthrs(TMC &st) {
st.printLabel();
SERIAL_ECHOLNPAIR(" stealthChop max speed: ", st.get_pwm_thrs());
SERIAL_ECHOLNPGM(" stealthChop max speed: ", st.get_pwm_thrs());
}
#endif
#if USE_SENSORLESS

2
Marlin/src/feature/twibus.cpp
View file

@ -84,7 +84,7 @@ void TWIBus::send() {
void TWIBus::echoprefix(uint8_t bytes, const char pref[], uint8_t adr) {
SERIAL_ECHO_START();
SERIAL_ECHOPGM_P(pref);
SERIAL_ECHOPAIR(": from:", adr, " bytes:", bytes, " data:");
SERIAL_ECHOPGM(": from:", adr, " bytes:", bytes, " data:");
}
// static

2
Marlin/src/gcode/bedlevel/G26.cpp
View file

@ -539,7 +539,7 @@ void GcodeSuite::G26() {
if (bedtemp) {
if (!WITHIN(bedtemp, 40, BED_MAX_TARGET)) {
SERIAL_ECHOLNPAIR("?Specified bed temperature not plausible (40-", BED_MAX_TARGET, "C).");
SERIAL_ECHOLNPGM("?Specified bed temperature not plausible (40-", BED_MAX_TARGET, "C).");
return;
}
g26.bed_temp = bedtemp;

14
Marlin/src/gcode/bedlevel/G35.cpp
View file

@ -106,19 +106,19 @@ void GcodeSuite::G35() {
const float z_probed_height = probe.probe_at_point(tramming_points[i], PROBE_PT_RAISE, 0, true);
if (isnan(z_probed_height)) {
SERIAL_ECHOPAIR("G35 failed at point ", i + 1, " (");
SERIAL_ECHOPGM("G35 failed at point ", i + 1, " (");
SERIAL_ECHOPGM_P((char *)pgm_read_ptr(&tramming_point_name[i]));
SERIAL_CHAR(')');
SERIAL_ECHOLNPAIR_P(SP_X_STR, tramming_points[i].x, SP_Y_STR, tramming_points[i].y);
SERIAL_ECHOLNPGM_P(SP_X_STR, tramming_points[i].x, SP_Y_STR, tramming_points[i].y);
err_break = true;
break;
}
if (DEBUGGING(LEVELING)) {
DEBUG_ECHOPAIR("Probing point ", i + 1, " (");
DEBUG_ECHOPGM("Probing point ", i + 1, " (");
DEBUG_ECHOPGM_P((char *)pgm_read_ptr(&tramming_point_name[i]));
DEBUG_CHAR(')');
DEBUG_ECHOLNPAIR_P(SP_X_STR, tramming_points[i].x, SP_Y_STR, tramming_points[i].y, SP_Z_STR, z_probed_height);
DEBUG_ECHOLNPGM_P(SP_X_STR, tramming_points[i].x, SP_Y_STR, tramming_points[i].y, SP_Z_STR, z_probed_height);
}
z_measured[i] = z_probed_height;
@ -138,9 +138,9 @@ void GcodeSuite::G35() {
SERIAL_ECHOPGM("Turn ");
SERIAL_ECHOPGM_P((char *)pgm_read_ptr(&tramming_point_name[i]));
SERIAL_ECHOPAIR(" ", (screw_thread & 1) == (adjust > 0) ? "CCW" : "CW", " by ", ABS(full_turns), " turns");
if (minutes) SERIAL_ECHOPAIR(" and ", ABS(minutes), " minutes");
if (ENABLED(REPORT_TRAMMING_MM)) SERIAL_ECHOPAIR(" (", -diff, "mm)");
SERIAL_ECHOPGM(" ", (screw_thread & 1) == (adjust > 0) ? "CCW" : "CW", " by ", ABS(full_turns), " turns");
if (minutes) SERIAL_ECHOPGM(" and ", ABS(minutes), " minutes");
if (ENABLED(REPORT_TRAMMING_MM)) SERIAL_ECHOPGM(" (", -diff, "mm)");
SERIAL_EOL();
}
}

10
Marlin/src/gcode/bedlevel/M420.cpp
View file

@ -76,9 +76,9 @@ void GcodeSuite::M420() {
TERN_(EXTENSIBLE_UI, ExtUI::onMeshUpdate(x, y, Z_VALUES(x, y)));
}
SERIAL_ECHOPGM("Simulated " STRINGIFY(GRID_MAX_POINTS_X) "x" STRINGIFY(GRID_MAX_POINTS_Y) " mesh ");
SERIAL_ECHOPAIR(" (", x_min);
SERIAL_ECHOPGM(" (", x_min);
SERIAL_CHAR(','); SERIAL_ECHO(y_min);
SERIAL_ECHOPAIR(")-(", x_max);
SERIAL_ECHOPGM(")-(", x_max);
SERIAL_CHAR(','); SERIAL_ECHO(y_max);
SERIAL_ECHOLNPGM(")");
}
@ -108,7 +108,7 @@ void GcodeSuite::M420() {
if (!WITHIN(storage_slot, 0, a - 1)) {
SERIAL_ECHOLNPGM("?Invalid storage slot.");
SERIAL_ECHOLNPAIR("?Use 0 to ", a - 1);
SERIAL_ECHOLNPGM("?Use 0 to ", a - 1);
return;
}
@ -128,7 +128,7 @@ void GcodeSuite::M420() {
ubl.display_map(parser.byteval('T'));
SERIAL_ECHOPGM("Mesh is ");
if (!ubl.mesh_is_valid()) SERIAL_ECHOPGM("in");
SERIAL_ECHOLNPAIR("valid\nStorage slot: ", ubl.storage_slot);
SERIAL_ECHOLNPGM("valid\nStorage slot: ", ubl.storage_slot);
}
#endif // AUTO_BED_LEVELING_UBL
@ -246,7 +246,7 @@ void GcodeSuite::M420_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(
TERN(MESH_BED_LEVELING, "Mesh Bed Leveling", TERN(AUTO_BED_LEVELING_UBL, "Unified Bed Leveling", "Auto Bed Leveling"))
));
SERIAL_ECHOPAIR_P(
SERIAL_ECHOPGM_P(
PSTR(" M420 S"), planner.leveling_active
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
, SP_Z_STR, LINEAR_UNIT(planner.z_fade_height)

18
Marlin/src/gcode/bedlevel/abl/G29.cpp
View file

@ -379,7 +379,7 @@ G29_TYPE GcodeSuite::G29() {
if (!probe.good_bounds(abl.probe_position_lf, abl.probe_position_rb)) {
if (DEBUGGING(LEVELING)) {
DEBUG_ECHOLNPAIR("G29 L", abl.probe_position_lf.x, " R", abl.probe_position_rb.x,
DEBUG_ECHOLNPGM("G29 L", abl.probe_position_lf.x, " R", abl.probe_position_rb.x,
" F", abl.probe_position_lf.y, " B", abl.probe_position_rb.y);
}
SERIAL_ECHOLNPGM("? (L,R,F,B) out of bounds.");
@ -470,7 +470,7 @@ G29_TYPE GcodeSuite::G29() {
if (abl.verbose_level || seenQ) {
SERIAL_ECHOPGM("Manual G29 ");
if (g29_in_progress)
SERIAL_ECHOLNPAIR("point ", _MIN(abl.abl_probe_index + 1, abl.abl_points), " of ", abl.abl_points);
SERIAL_ECHOLNPGM("point ", _MIN(abl.abl_probe_index + 1, abl.abl_points), " of ", abl.abl_points);
else
SERIAL_ECHOLNPGM("idle");
}
@ -513,7 +513,7 @@ G29_TYPE GcodeSuite::G29() {
z_values[abl.meshCount.x][abl.meshCount.y] = newz;
TERN_(EXTENSIBLE_UI, ExtUI::onMeshUpdate(abl.meshCount, newz));
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR_P(PSTR("Save X"), abl.meshCount.x, SP_Y_STR, abl.meshCount.y, SP_Z_STR, abl.measured_z + abl.Z_offset);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM_P(PSTR("Save X"), abl.meshCount.x, SP_Y_STR, abl.meshCount.y, SP_Z_STR, abl.measured_z + abl.Z_offset);
#endif
}
@ -635,7 +635,7 @@ G29_TYPE GcodeSuite::G29() {
// Avoid probing outside the round or hexagonal area
if (TERN0(IS_KINEMATIC, !probe.can_reach(abl.probePos))) continue;
if (abl.verbose_level) SERIAL_ECHOLNPAIR("Probing mesh point ", pt_index, "/", abl.abl_points, ".");
if (abl.verbose_level) SERIAL_ECHOLNPGM("Probing mesh point ", pt_index, "/", abl.abl_points, ".");
TERN_(HAS_STATUS_MESSAGE, ui.status_printf_P(0, PSTR(S_FMT " %i/%i"), GET_TEXT(MSG_PROBING_POINT), int(pt_index), int(abl.abl_points)));
abl.measured_z = faux ? 0.001f * random(-100, 101) : probe.probe_at_point(abl.probePos, raise_after, abl.verbose_level);
@ -680,7 +680,7 @@ G29_TYPE GcodeSuite::G29() {
// Probe at 3 arbitrary points
LOOP_L_N(i, 3) {
if (abl.verbose_level) SERIAL_ECHOLNPAIR("Probing point ", i + 1, "/3.");
if (abl.verbose_level) SERIAL_ECHOLNPGM("Probing point ", i + 1, "/3.");
TERN_(HAS_STATUS_MESSAGE, ui.status_printf_P(0, PSTR(S_FMT " %i/3"), GET_TEXT(MSG_PROBING_POINT), int(i + 1)));
// Retain the last probe position
@ -842,7 +842,7 @@ G29_TYPE GcodeSuite::G29() {
&& NEAR(current_position.y, abl.probePos.y - probe.offset_xy.y)
) {
const float simple_z = current_position.z - abl.measured_z;
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("Probed Z", simple_z, " Matrix Z", converted.z, " Discrepancy ", simple_z - converted.z);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("Probed Z", simple_z, " Matrix Z", converted.z, " Discrepancy ", simple_z - converted.z);
converted.z = simple_z;
}
@ -855,14 +855,14 @@ G29_TYPE GcodeSuite::G29() {
#elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
if (!abl.dryrun) {
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("G29 uncorrected Z:", current_position.z);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("G29 uncorrected Z:", current_position.z);
// Unapply the offset because it is going to be immediately applied
// and cause compensation movement in Z
const float fade_scaling_factor = TERN(ENABLE_LEVELING_FADE_HEIGHT, planner.fade_scaling_factor_for_z(current_position.z), 1);
current_position.z -= fade_scaling_factor * bilinear_z_offset(current_position);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR(" corrected Z:", current_position.z);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM(" corrected Z:", current_position.z);
}
#endif // ABL_PLANAR
@ -880,7 +880,7 @@ G29_TYPE GcodeSuite::G29() {
TERN_(HAS_BED_PROBE, probe.move_z_after_probing());
#ifdef Z_PROBE_END_SCRIPT
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("Z Probe End Script: ", Z_PROBE_END_SCRIPT);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("Z Probe End Script: ", Z_PROBE_END_SCRIPT);
planner.synchronize();
process_subcommands_now_P(PSTR(Z_PROBE_END_SCRIPT));
#endif

6
Marlin/src/gcode/bedlevel/mbl/G29.cpp
View file

@ -173,7 +173,7 @@ void GcodeSuite::G29() {
if (parser.seenval('I')) {
ix = parser.value_int();
if (!WITHIN(ix, 0, (GRID_MAX_POINTS_X) - 1)) {
SERIAL_ECHOLNPAIR("I out of range (0-", (GRID_MAX_POINTS_X) - 1, ")");
SERIAL_ECHOLNPGM("I out of range (0-", (GRID_MAX_POINTS_X) - 1, ")");
return;
}
}
@ -183,7 +183,7 @@ void GcodeSuite::G29() {
if (parser.seenval('J')) {
iy = parser.value_int();
if (!WITHIN(iy, 0, (GRID_MAX_POINTS_Y) - 1)) {
SERIAL_ECHOLNPAIR("J out of range (0-", (GRID_MAX_POINTS_Y) - 1, ")");
SERIAL_ECHOLNPGM("J out of range (0-", (GRID_MAX_POINTS_Y) - 1, ")");
return;
}
}
@ -213,7 +213,7 @@ void GcodeSuite::G29() {
} // switch(state)
if (state == MeshNext) {
SERIAL_ECHOLNPAIR("MBL G29 point ", _MIN(mbl_probe_index, GRID_MAX_POINTS), " of ", GRID_MAX_POINTS);
SERIAL_ECHOLNPGM("MBL G29 point ", _MIN(mbl_probe_index, GRID_MAX_POINTS), " of ", GRID_MAX_POINTS);
if (mbl_probe_index > 0) TERN_(HAS_STATUS_MESSAGE, ui.status_printf_P(0, PSTR(S_FMT " %i/%i"), GET_TEXT(MSG_PROBING_POINT), _MIN(mbl_probe_index, GRID_MAX_POINTS), int(GRID_MAX_POINTS)));
}

4
Marlin/src/gcode/calibrate/G28.cpp
View file

@ -270,7 +270,7 @@ void GcodeSuite::G28() {
#if HAS_HOMING_CURRENT
auto debug_current = [](PGM_P const s, const int16_t a, const int16_t b) {
DEBUG_ECHOPGM_P(s); DEBUG_ECHOLNPAIR(" current: ", a, " -> ", b);
DEBUG_ECHOPGM_P(s); DEBUG_ECHOLNPGM(" current: ", a, " -> ", b);
};
#if HAS_CURRENT_HOME(X)
const int16_t tmc_save_current_X = stepperX.getMilliamps();
@ -371,7 +371,7 @@ void GcodeSuite::G28() {
if (z_homing_height && (LINEAR_AXIS_GANG(doX, || doY, || TERN0(Z_SAFE_HOMING, doZ), || doI, || doJ, || doK))) {
// Raise Z before homing any other axes and z is not already high enough (never lower z)
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("Raise Z (before homing) by ", z_homing_height);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("Raise Z (before homing) by ", z_homing_height);
do_z_clearance(z_homing_height);
TERN_(BLTOUCH, bltouch.init());
}

6
Marlin/src/gcode/calibrate/G33.cpp
View file

@ -107,14 +107,14 @@ void print_signed_float(PGM_P const prefix, const_float_t f) {
* - Print the delta settings
*/
static void print_calibration_settings(const bool end_stops, const bool tower_angles) {
SERIAL_ECHOPAIR(".Height:", delta_height);
SERIAL_ECHOPGM(".Height:", delta_height);
if (end_stops) {
print_signed_float(PSTR("Ex"), delta_endstop_adj.a);
print_signed_float(PSTR("Ey"), delta_endstop_adj.b);
print_signed_float(PSTR("Ez"), delta_endstop_adj.c);
}
if (end_stops && tower_angles) {
SERIAL_ECHOPAIR(" Radius:", delta_radius);
SERIAL_ECHOPGM(" Radius:", delta_radius);
SERIAL_EOL();
SERIAL_CHAR('.');
SERIAL_ECHO_SP(13);
@ -125,7 +125,7 @@ static void print_calibration_settings(const bool end_stops, const bool tower_an
print_signed_float(PSTR("Tz"), delta_tower_angle_trim.c);
}
if ((!end_stops && tower_angles) || (end_stops && !tower_angles)) { // XOR
SERIAL_ECHOPAIR(" Radius:", delta_radius);
SERIAL_ECHOPGM(" Radius:", delta_radius);
}
SERIAL_EOL();
}

26
Marlin/src/gcode/calibrate/G34_M422.cpp
View file

@ -201,7 +201,7 @@ void GcodeSuite::G34() {
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("> probing all positions.");
const int iter = iteration + 1;
SERIAL_ECHOLNPAIR("\nG34 Iteration: ", iter);
SERIAL_ECHOLNPGM("\nG34 Iteration: ", iter);
#if HAS_STATUS_MESSAGE
char str[iter_str_len + 2 + 1];
sprintf_P(str, msg_iteration, iter);
@ -221,7 +221,7 @@ void GcodeSuite::G34() {
if ((iteration == 0 || i > 0) && z_probe > current_position.z) do_blocking_move_to_z(z_probe);
if (DEBUGGING(LEVELING))
DEBUG_ECHOLNPAIR_P(PSTR("Probing X"), z_stepper_align.xy[iprobe].x, SP_Y_STR, z_stepper_align.xy[iprobe].y);
DEBUG_ECHOLNPGM_P(PSTR("Probing X"), z_stepper_align.xy[iprobe].x, SP_Y_STR, z_stepper_align.xy[iprobe].y);
// Probe a Z height for each stepper.
// Probing sanity check is disabled, as it would trigger even in normal cases because
@ -238,7 +238,7 @@ void GcodeSuite::G34() {
// the next iteration of probing. This allows adjustments to be made away from the bed.
z_measured[iprobe] = z_probed_height + Z_CLEARANCE_BETWEEN_PROBES;
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("> Z", iprobe + 1, " measured position is ", z_measured[iprobe]);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("> Z", iprobe + 1, " measured position is ", z_measured[iprobe]);
// Remember the minimum measurement to calculate the correction later on
z_measured_min = _MIN(z_measured_min, z_measured[iprobe]);
@ -267,7 +267,7 @@ void GcodeSuite::G34() {
linear_fit_data lfd;
incremental_LSF_reset(&lfd);
LOOP_L_N(i, NUM_Z_STEPPER_DRIVERS) {
SERIAL_ECHOLNPAIR("PROBEPT_", i, ": ", z_measured[i]);
SERIAL_ECHOLNPGM("PROBEPT_", i, ": ", z_measured[i]);
incremental_LSF(&lfd, z_stepper_align.xy[i], z_measured[i]);
}
finish_incremental_LSF(&lfd);
@ -278,7 +278,7 @@ void GcodeSuite::G34() {
z_measured_min = _MIN(z_measured_min, z_measured[i]);
}
SERIAL_ECHOLNPAIR(
SERIAL_ECHOLNPGM(
LIST_N(DOUBLE(NUM_Z_STEPPER_DRIVERS),
"Calculated Z1=", z_measured[0],
" Z2=", z_measured[1],
@ -288,7 +288,7 @@ void GcodeSuite::G34() {
);
#endif
SERIAL_ECHOLNPAIR("\n"
SERIAL_ECHOLNPGM("\n"
"Z2-Z1=", ABS(z_measured[1] - z_measured[0])
#if TRIPLE_Z
, " Z3-Z2=", ABS(z_measured[2] - z_measured[1])
@ -372,8 +372,8 @@ void GcodeSuite::G34() {
// Check for less accuracy compared to last move
if (decreasing_accuracy(last_z_align_move[zstepper], z_align_abs)) {
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("> Z", zstepper + 1, " last_z_align_move = ", last_z_align_move[zstepper]);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("> Z", zstepper + 1, " z_align_abs = ", z_align_abs);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("> Z", zstepper + 1, " last_z_align_move = ", last_z_align_move[zstepper]);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("> Z", zstepper + 1, " z_align_abs = ", z_align_abs);
adjustment_reverse = !adjustment_reverse;
}
@ -385,7 +385,7 @@ void GcodeSuite::G34() {
// Stop early if all measured points achieve accuracy target
if (z_align_abs > z_auto_align_accuracy) success_break = false;
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("> Z", zstepper + 1, " corrected by ", z_align_move);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("> Z", zstepper + 1, " corrected by ", z_align_move);
// Lock all steppers except one
stepper.set_all_z_lock(true, zstepper);
@ -395,7 +395,7 @@ void GcodeSuite::G34() {
// Will match reversed Z steppers on dual steppers. Triple will need more work to map.
if (adjustment_reverse) {
z_align_move = -z_align_move;
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("> Z", zstepper + 1, " correction reversed to ", z_align_move);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("> Z", zstepper + 1, " correction reversed to ", z_align_move);
}
#endif
@ -421,7 +421,7 @@ void GcodeSuite::G34() {
if (err_break)
SERIAL_ECHOLNPGM("G34 aborted.");
else {
SERIAL_ECHOLNPAIR("Did ", iteration + (iteration != z_auto_align_iterations), " of ", z_auto_align_iterations);
SERIAL_ECHOLNPGM("Did ", iteration + (iteration != z_auto_align_iterations), " of ", z_auto_align_iterations);
SERIAL_ECHOLNPAIR_F("Accuracy: ", z_maxdiff);
}
@ -541,7 +541,7 @@ void GcodeSuite::M422_report(const bool forReplay/*=true*/) {
report_heading(forReplay, PSTR(STR_Z_AUTO_ALIGN));
LOOP_L_N(i, NUM_Z_STEPPER_DRIVERS) {
report_echo_start(forReplay);
SERIAL_ECHOLNPAIR_P(
SERIAL_ECHOLNPGM_P(
PSTR(" M422 S"), i + 1,
SP_X_STR, z_stepper_align.xy[i].x,
SP_Y_STR, z_stepper_align.xy[i].y
@ -550,7 +550,7 @@ void GcodeSuite::M422_report(const bool forReplay/*=true*/) {
#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
LOOP_L_N(i, NUM_Z_STEPPER_DRIVERS) {
report_echo_start(forReplay);
SERIAL_ECHOLNPAIR_P(
SERIAL_ECHOLNPGM_P(
PSTR(" M422 W"), i + 1,
SP_X_STR, z_stepper_align.stepper_xy[i].x,
SP_Y_STR, z_stepper_align.stepper_xy[i].y

74
Marlin/src/gcode/calibrate/G425.cpp
View file

@ -354,44 +354,44 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
inline void report_measured_faces(const measurements_t &m) {
SERIAL_ECHOLNPGM("Sides:");
#if HAS_Z_AXIS && AXIS_CAN_CALIBRATE(Z)
SERIAL_ECHOLNPAIR(" Top: ", m.obj_side[TOP]);
SERIAL_ECHOLNPGM(" Top: ", m.obj_side[TOP]);
#endif
#if ENABLED(CALIBRATION_MEASURE_LEFT)
SERIAL_ECHOLNPAIR(" Left: ", m.obj_side[LEFT]);
SERIAL_ECHOLNPGM(" Left: ", m.obj_side[LEFT]);
#endif
#if ENABLED(CALIBRATION_MEASURE_RIGHT)
SERIAL_ECHOLNPAIR(" Right: ", m.obj_side[RIGHT]);
SERIAL_ECHOLNPGM(" Right: ", m.obj_side[RIGHT]);
#endif
#if HAS_Y_AXIS
#if ENABLED(CALIBRATION_MEASURE_FRONT)
SERIAL_ECHOLNPAIR(" Front: ", m.obj_side[FRONT]);
SERIAL_ECHOLNPGM(" Front: ", m.obj_side[FRONT]);
#endif
#if ENABLED(CALIBRATION_MEASURE_BACK)
SERIAL_ECHOLNPAIR(" Back: ", m.obj_side[BACK]);
SERIAL_ECHOLNPGM(" Back: ", m.obj_side[BACK]);
#endif
#endif
#if LINEAR_AXES >= 4
#if ENABLED(CALIBRATION_MEASURE_IMIN)
SERIAL_ECHOLNPAIR(" " STR_I_MIN ": ", m.obj_side[IMINIMUM]);
SERIAL_ECHOLNPGM(" " STR_I_MIN ": ", m.obj_side[IMINIMUM]);
#endif
#if ENABLED(CALIBRATION_MEASURE_IMAX)
SERIAL_ECHOLNPAIR(" " STR_I_MAX ": ", m.obj_side[IMAXIMUM]);
SERIAL_ECHOLNPGM(" " STR_I_MAX ": ", m.obj_side[IMAXIMUM]);
#endif
#endif
#if LINEAR_AXES >= 5
#if ENABLED(CALIBRATION_MEASURE_JMIN)
SERIAL_ECHOLNPAIR(" " STR_J_MIN ": ", m.obj_side[JMINIMUM]);
SERIAL_ECHOLNPGM(" " STR_J_MIN ": ", m.obj_side[JMINIMUM]);
#endif
#if ENABLED(CALIBRATION_MEASURE_JMAX)
SERIAL_ECHOLNPAIR(" " STR_J_MAX ": ", m.obj_side[JMAXIMUM]);
SERIAL_ECHOLNPGM(" " STR_J_MAX ": ", m.obj_side[JMAXIMUM]);
#endif
#endif
#if LINEAR_AXES >= 6
#if ENABLED(CALIBRATION_MEASURE_KMIN)
SERIAL_ECHOLNPAIR(" " STR_K_MIN ": ", m.obj_side[KMINIMUM]);
SERIAL_ECHOLNPGM(" " STR_K_MIN ": ", m.obj_side[KMINIMUM]);
#endif
#if ENABLED(CALIBRATION_MEASURE_KMAX)
SERIAL_ECHOLNPAIR(" " STR_K_MAX ": ", m.obj_side[KMAXIMUM]);
SERIAL_ECHOLNPGM(" " STR_K_MAX ": ", m.obj_side[KMAXIMUM]);
#endif
#endif
SERIAL_EOL();
@ -400,20 +400,20 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
inline void report_measured_center(const measurements_t &m) {
SERIAL_ECHOLNPGM("Center:");
#if HAS_X_CENTER
SERIAL_ECHOLNPAIR_P(SP_X_STR, m.obj_center.x);
SERIAL_ECHOLNPGM_P(SP_X_STR, m.obj_center.x);
#endif
#if HAS_Y_CENTER
SERIAL_ECHOLNPAIR_P(SP_Y_STR, m.obj_center.y);
SERIAL_ECHOLNPGM_P(SP_Y_STR, m.obj_center.y);
#endif
SERIAL_ECHOLNPAIR_P(SP_Z_STR, m.obj_center.z);
SERIAL_ECHOLNPGM_P(SP_Z_STR, m.obj_center.z);
#if HAS_I_CENTER
SERIAL_ECHOLNPAIR_P(SP_I_STR, m.obj_center.i);
SERIAL_ECHOLNPGM_P(SP_I_STR, m.obj_center.i);
#endif
#if HAS_J_CENTER
SERIAL_ECHOLNPAIR_P(SP_J_STR, m.obj_center.j);
SERIAL_ECHOLNPGM_P(SP_J_STR, m.obj_center.j);
#endif
#if HAS_K_CENTER
SERIAL_ECHOLNPAIR_P(SP_K_STR, m.obj_center.k);
SERIAL_ECHOLNPGM_P(SP_K_STR, m.obj_center.k);
#endif
SERIAL_EOL();
}
@ -422,45 +422,45 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
SERIAL_ECHOLNPGM("Backlash:");
#if AXIS_CAN_CALIBRATE(X)
#if ENABLED(CALIBRATION_MEASURE_LEFT)
SERIAL_ECHOLNPAIR(" Left: ", m.backlash[LEFT]);
SERIAL_ECHOLNPGM(" Left: ", m.backlash[LEFT]);
#endif
#if ENABLED(CALIBRATION_MEASURE_RIGHT)
SERIAL_ECHOLNPAIR(" Right: ", m.backlash[RIGHT]);
SERIAL_ECHOLNPGM(" Right: ", m.backlash[RIGHT]);
#endif
#endif
#if HAS_Y_AXIS && AXIS_CAN_CALIBRATE(Y)
#if ENABLED(CALIBRATION_MEASURE_FRONT)
SERIAL_ECHOLNPAIR(" Front: ", m.backlash[FRONT]);
SERIAL_ECHOLNPGM(" Front: ", m.backlash[FRONT]);
#endif
#if ENABLED(CALIBRATION_MEASURE_BACK)
SERIAL_ECHOLNPAIR(" Back: ", m.backlash[BACK]);
SERIAL_ECHOLNPGM(" Back: ", m.backlash[BACK]);
#endif
#endif
#if HAS_Z_AXIS && AXIS_CAN_CALIBRATE(Z)
SERIAL_ECHOLNPAIR(" Top: ", m.backlash[TOP]);
SERIAL_ECHOLNPGM(" Top: ", m.backlash[TOP]);
#endif
#if LINEAR_AXES >= 4 && AXIS_CAN_CALIBRATE(I)
#if ENABLED(CALIBRATION_MEASURE_IMIN)
SERIAL_ECHOLNPAIR(" " STR_I_MIN ": ", m.backlash[IMINIMUM]);
SERIAL_ECHOLNPGM(" " STR_I_MIN ": ", m.backlash[IMINIMUM]);
#endif
#if ENABLED(CALIBRATION_MEASURE_IMAX)
SERIAL_ECHOLNPAIR(" " STR_I_MAX ": ", m.backlash[IMAXIMUM]);
SERIAL_ECHOLNPGM(" " STR_I_MAX ": ", m.backlash[IMAXIMUM]);
#endif
#endif
#if LINEAR_AXES >= 5 && AXIS_CAN_CALIBRATE(J)
#if ENABLED(CALIBRATION_MEASURE_JMIN)
SERIAL_ECHOLNPAIR(" " STR_J_MIN ": ", m.backlash[JMINIMUM]);
SERIAL_ECHOLNPGM(" " STR_J_MIN ": ", m.backlash[JMINIMUM]);
#endif
#if ENABLED(CALIBRATION_MEASURE_JMAX)
SERIAL_ECHOLNPAIR(" " STR_J_MAX ": ", m.backlash[JMAXIMUM]);
SERIAL_ECHOLNPGM(" " STR_J_MAX ": ", m.backlash[JMAXIMUM]);
#endif
#endif
#if LINEAR_AXES >= 6 && AXIS_CAN_CALIBRATE(K)
#if ENABLED(CALIBRATION_MEASURE_KMIN)
SERIAL_ECHOLNPAIR(" " STR_K_MIN ": ", m.backlash[KMINIMUM]);
SERIAL_ECHOLNPGM(" " STR_K_MIN ": ", m.backlash[KMINIMUM]);
#endif
#if ENABLED(CALIBRATION_MEASURE_KMAX)
SERIAL_ECHOLNPAIR(" " STR_K_MAX ": ", m.backlash[KMAXIMUM]);
SERIAL_ECHOLNPGM(" " STR_K_MAX ": ", m.backlash[KMAXIMUM]);
#endif
#endif
SERIAL_EOL();
@ -471,22 +471,22 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
SERIAL_ECHO(active_extruder);
SERIAL_ECHOLNPGM(" Positional Error:");
#if HAS_X_CENTER && AXIS_CAN_CALIBRATE(X)
SERIAL_ECHOLNPAIR_P(SP_X_STR, m.pos_error.x);
SERIAL_ECHOLNPGM_P(SP_X_STR, m.pos_error.x);
#endif
#if HAS_Y_CENTER && AXIS_CAN_CALIBRATE(Y)
SERIAL_ECHOLNPAIR_P(SP_Y_STR, m.pos_error.y);
SERIAL_ECHOLNPGM_P(SP_Y_STR, m.pos_error.y);
#endif
#if HAS_Z_AXIS && AXIS_CAN_CALIBRATE(Z)
SERIAL_ECHOLNPAIR_P(SP_Z_STR, m.pos_error.z);
SERIAL_ECHOLNPGM_P(SP_Z_STR, m.pos_error.z);
#endif
#if HAS_I_CENTER && AXIS_CAN_CALIBRATE(I)
SERIAL_ECHOLNPAIR_P(SP_I_STR, m.pos_error.i);
SERIAL_ECHOLNPGM_P(SP_I_STR, m.pos_error.i);
#endif
#if HAS_J_CENTER && AXIS_CAN_CALIBRATE(J)
SERIAL_ECHOLNPAIR_P(SP_J_STR, m.pos_error.j);
SERIAL_ECHOLNPGM_P(SP_J_STR, m.pos_error.j);
#endif
#if HAS_K_CENTER && AXIS_CAN_CALIBRATE(K)
SERIAL_ECHOLNPAIR_P(SP_Z_STR, m.pos_error.z);
SERIAL_ECHOLNPGM_P(SP_Z_STR, m.pos_error.z);
#endif
SERIAL_EOL();
}
@ -494,10 +494,10 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
inline void report_measured_nozzle_dimensions(const measurements_t &m) {
SERIAL_ECHOLNPGM("Nozzle Tip Outer Dimensions:");
#if HAS_X_CENTER
SERIAL_ECHOLNPAIR_P(SP_X_STR, m.nozzle_outer_dimension.x);
SERIAL_ECHOLNPGM_P(SP_X_STR, m.nozzle_outer_dimension.x);
#endif
#if HAS_Y_CENTER
SERIAL_ECHOLNPAIR_P(SP_Y_STR, m.nozzle_outer_dimension.y);
SERIAL_ECHOLNPGM_P(SP_Y_STR, m.nozzle_outer_dimension.y);
#endif
SERIAL_EOL();
UNUSED(m);
@ -509,7 +509,7 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
//
inline void report_hotend_offsets() {
LOOP_S_L_N(e, 1, HOTENDS)
SERIAL_ECHOLNPAIR_P(PSTR("T"), e, PSTR(" Hotend Offset X"), hotend_offset[e].x, SP_Y_STR, hotend_offset[e].y, SP_Z_STR, hotend_offset[e].z);
SERIAL_ECHOLNPGM_P(PSTR("T"), e, PSTR(" Hotend Offset X"), hotend_offset[e].x, SP_Y_STR, hotend_offset[e].y, SP_Z_STR, hotend_offset[e].z);
}
#endif

10
Marlin/src/gcode/calibrate/G76_M192_M871.cpp
View file

@ -171,7 +171,7 @@ void GcodeSuite::G76() {
millis_t next_temp_report = millis() + 1000;
auto report_targets = [&](const celsius_t tb, const celsius_t tp) {
SERIAL_ECHOLNPAIR("Target Bed:", tb, " Probe:", tp);
SERIAL_ECHOLNPGM("Target Bed:", tb, " Probe:", tp);
};
if (do_bed_cal) {
@ -211,7 +211,7 @@ void GcodeSuite::G76() {
if (isnan(measured_z) || target_bed > (BED_MAX_TARGET)) break;
}
SERIAL_ECHOLNPAIR("Retrieved measurements: ", temp_comp.get_index());
SERIAL_ECHOLNPGM("Retrieved measurements: ", temp_comp.get_index());
if (temp_comp.finish_calibration(TSI_BED)) {
say_successfully_calibrated();
SERIAL_ECHOLNPGM(" bed.");
@ -255,7 +255,7 @@ void GcodeSuite::G76() {
do_blocking_move_to(noz_pos_xyz);
say_waiting_for_probe_heating();
SERIAL_ECHOLNPAIR(" Bed:", target_bed, " Probe:", target_probe);
SERIAL_ECHOLNPGM(" Bed:", target_bed, " Probe:", target_probe);
const millis_t probe_timeout_ms = millis() + SEC_TO_MS(900UL);
while (thermalManager.degProbe() < target_probe) {
if (report_temps(next_temp_report, probe_timeout_ms)) {
@ -270,7 +270,7 @@ void GcodeSuite::G76() {
if (isnan(measured_z) || target_probe > cali_info_init[TSI_PROBE].end_temp) break;
}
SERIAL_ECHOLNPAIR("Retrieved measurements: ", temp_comp.get_index());
SERIAL_ECHOLNPGM("Retrieved measurements: ", temp_comp.get_index());
if (temp_comp.finish_calibration(TSI_PROBE))
say_successfully_calibrated();
else
@ -325,7 +325,7 @@ void GcodeSuite::M871() {
TSI_PROBE
);
if (idx > 0 && temp_comp.set_offset(mod, idx - 1, offset_val))
SERIAL_ECHOLNPAIR("Set value: ", offset_val);
SERIAL_ECHOLNPGM("Set value: ", offset_val);
else
SERIAL_ECHOLNPGM("!Invalid index. Failed to set value (note: value at index 0 is constant).");

36
Marlin/src/gcode/calibrate/M100.cpp
View file

@ -202,7 +202,7 @@ inline int check_for_free_memory_corruption(PGM_P const title) {
char *start_free_memory = free_memory_start, *end_free_memory = free_memory_end;
int n = end_free_memory - start_free_memory;
SERIAL_ECHOLNPAIR("\nfmc() n=", n,
SERIAL_ECHOLNPGM("\nfmc() n=", n,
"\nfree_memory_start=", hex_address(free_memory_start),
" end=", hex_address(end_free_memory));
@ -227,15 +227,15 @@ inline int check_for_free_memory_corruption(PGM_P const title) {
if (start_free_memory[i] == TEST_BYTE) {
int32_t j = count_test_bytes(start_free_memory + i);
if (j > 8) {
//SERIAL_ECHOPAIR("Found ", j);
//SERIAL_ECHOLNPAIR(" bytes free at ", hex_address(start_free_memory + i));
//SERIAL_ECHOPGM("Found ", j);
//SERIAL_ECHOLNPGM(" bytes free at ", hex_address(start_free_memory + i));
i += j;
block_cnt++;
SERIAL_ECHOLNPAIR(" (", block_cnt, ") found=", j);
SERIAL_ECHOLNPGM(" (", block_cnt, ") found=", j);
}
}
}
SERIAL_ECHOPAIR(" block_found=", block_cnt);
SERIAL_ECHOPGM(" block_found=", block_cnt);
if (block_cnt != 1)
SERIAL_ECHOLNPGM("\nMemory Corruption detected in free memory area.");
@ -267,7 +267,7 @@ inline void free_memory_pool_report(char * const start_free_memory, const int32_
if (*addr == TEST_BYTE) {
const int32_t j = count_test_bytes(addr);
if (j > 8) {
SERIAL_ECHOLNPAIR("Found ", j, " bytes free at ", hex_address(addr));
SERIAL_ECHOLNPGM("Found ", j, " bytes free at ", hex_address(addr));
if (j > max_cnt) {
max_cnt = j;
max_addr = addr;
@ -277,11 +277,11 @@ inline void free_memory_pool_report(char * const start_free_memory, const int32_
}
}
}
if (block_cnt > 1) SERIAL_ECHOLNPAIR(
if (block_cnt > 1) SERIAL_ECHOLNPGM(
"\nMemory Corruption detected in free memory area."
"\nLargest free block is ", max_cnt, " bytes at ", hex_address(max_addr)
);
SERIAL_ECHOLNPAIR("check_for_free_memory_corruption() = ", check_for_free_memory_corruption(PSTR("M100 F ")));
SERIAL_ECHOLNPGM("check_for_free_memory_corruption() = ", check_for_free_memory_corruption(PSTR("M100 F ")));
}
#if ENABLED(M100_FREE_MEMORY_CORRUPTOR)
@ -299,7 +299,7 @@ inline void free_memory_pool_report(char * const start_free_memory, const int32_
for (uint32_t i = 1; i <= size; i++) {
char * const addr = start_free_memory + i * j;
*addr = i;
SERIAL_ECHOPAIR("\nCorrupting address: ", hex_address(addr));
SERIAL_ECHOPGM("\nCorrupting address: ", hex_address(addr));
}
SERIAL_EOL();
}
@ -327,8 +327,8 @@ inline void init_free_memory(char *start_free_memory, int32_t size) {
for (int32_t i = 0; i < size; i++) {
if (start_free_memory[i] != TEST_BYTE) {
SERIAL_ECHOPAIR("? address : ", hex_address(start_free_memory + i));
SERIAL_ECHOLNPAIR("=", hex_byte(start_free_memory[i]));
SERIAL_ECHOPGM("? address : ", hex_address(start_free_memory + i));
SERIAL_ECHOLNPGM("=", hex_byte(start_free_memory[i]));
SERIAL_EOL();
}
}
@ -340,14 +340,14 @@ inline void init_free_memory(char *start_free_memory, int32_t size) {
void GcodeSuite::M100() {
char *sp = top_of_stack();
if (!free_memory_end) free_memory_end = sp - MEMORY_END_CORRECTION;
SERIAL_ECHOPAIR("\nbss_end : ", hex_address(end_bss));
if (heaplimit) SERIAL_ECHOPAIR("\n__heaplimit : ", hex_address(heaplimit));
SERIAL_ECHOPAIR("\nfree_memory_start : ", hex_address(free_memory_start));
if (stacklimit) SERIAL_ECHOPAIR("\n__stacklimit : ", hex_address(stacklimit));
SERIAL_ECHOPAIR("\nfree_memory_end : ", hex_address(free_memory_end));
SERIAL_ECHOPGM("\nbss_end : ", hex_address(end_bss));
if (heaplimit) SERIAL_ECHOPGM("\n__heaplimit : ", hex_address(heaplimit));
SERIAL_ECHOPGM("\nfree_memory_start : ", hex_address(free_memory_start));
if (stacklimit) SERIAL_ECHOPGM("\n__stacklimit : ", hex_address(stacklimit));
SERIAL_ECHOPGM("\nfree_memory_end : ", hex_address(free_memory_end));
if (MEMORY_END_CORRECTION)
SERIAL_ECHOPAIR("\nMEMORY_END_CORRECTION : ", MEMORY_END_CORRECTION);
SERIAL_ECHOLNPAIR("\nStack Pointer : ", hex_address(sp));
SERIAL_ECHOPGM("\nMEMORY_END_CORRECTION : ", MEMORY_END_CORRECTION);
SERIAL_ECHOLNPGM("\nStack Pointer : ", hex_address(sp));
// Always init on the first invocation of M100
static bool m100_not_initialized = true;

6
Marlin/src/gcode/calibrate/M425.cpp
View file

@ -86,7 +86,7 @@ void GcodeSuite::M425() {
SERIAL_ECHOPGM("Backlash Correction ");
if (!backlash.correction) SERIAL_ECHOPGM("in");
SERIAL_ECHOLNPGM("active:");
SERIAL_ECHOLNPAIR(" Correction Amount/Fade-out: F", backlash.get_correction(), " (F1.0 = full, F0.0 = none)");
SERIAL_ECHOLNPGM(" Correction Amount/Fade-out: F", backlash.get_correction(), " (F1.0 = full, F0.0 = none)");
SERIAL_ECHOPGM(" Backlash Distance (mm): ");
LOOP_LINEAR_AXES(a) if (axis_can_calibrate(a)) {
SERIAL_CHAR(' ', AXIS_CHAR(a));
@ -95,7 +95,7 @@ void GcodeSuite::M425() {
}
#ifdef BACKLASH_SMOOTHING_MM
SERIAL_ECHOLNPAIR(" Smoothing (mm): S", backlash.smoothing_mm);
SERIAL_ECHOLNPGM(" Smoothing (mm): S", backlash.smoothing_mm);
#endif
#if ENABLED(MEASURE_BACKLASH_WHEN_PROBING)
@ -115,7 +115,7 @@ void GcodeSuite::M425() {
void GcodeSuite::M425_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_BACKLASH_COMPENSATION));
SERIAL_ECHOLNPAIR_P(
SERIAL_ECHOLNPGM_P(
PSTR(" M425 F"), backlash.get_correction()
#ifdef BACKLASH_SMOOTHING_MM
, PSTR(" S"), LINEAR_UNIT(backlash.smoothing_mm)

8
Marlin/src/gcode/calibrate/M48.cpp
View file

@ -162,7 +162,7 @@ void GcodeSuite::M48() {
#endif
);
if (verbose_level > 3) {
SERIAL_ECHOPAIR("Start radius:", radius, " angle:", angle, " dir:");
SERIAL_ECHOPGM("Start radius:", radius, " angle:", angle, " dir:");
if (dir > 0) SERIAL_CHAR('C');
SERIAL_ECHOLNPGM("CW");
}
@ -200,7 +200,7 @@ void GcodeSuite::M48() {
while (!probe.can_reach(next_pos)) {
next_pos *= 0.8f;
if (verbose_level > 3)
SERIAL_ECHOLNPAIR_P(PSTR("Moving inward: X"), next_pos.x, SP_Y_STR, next_pos.y);
SERIAL_ECHOLNPGM_P(PSTR("Moving inward: X"), next_pos.x, SP_Y_STR, next_pos.y);
}
#elif HAS_ENDSTOPS
// For a rectangular bed just keep the probe in bounds
@ -209,7 +209,7 @@ void GcodeSuite::M48() {
#endif
if (verbose_level > 3)
SERIAL_ECHOLNPAIR_P(PSTR("Going to: X"), next_pos.x, SP_Y_STR, next_pos.y);
SERIAL_ECHOLNPGM_P(PSTR("Going to: X"), next_pos.x, SP_Y_STR, next_pos.y);
do_blocking_move_to_xy(next_pos);
} // n_legs loop
@ -241,7 +241,7 @@ void GcodeSuite::M48() {
if (verbose_level > 1) {
SERIAL_ECHO(n + 1);
SERIAL_ECHOPAIR(" of ", n_samples);
SERIAL_ECHOPGM(" of ", n_samples);
SERIAL_ECHOPAIR_F(": z: ", pz, 3);
SERIAL_CHAR(' ');
dev_report(verbose_level > 2, mean, sigma, min, max);

4
Marlin/src/gcode/calibrate/M665.cpp
View file

@ -63,7 +63,7 @@
void GcodeSuite::M665_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_DELTA_SETTINGS));
SERIAL_ECHOLNPAIR_P(
SERIAL_ECHOLNPGM_P(
PSTR(" M665 L"), LINEAR_UNIT(delta_diagonal_rod)
, PSTR(" R"), LINEAR_UNIT(delta_radius)
, PSTR(" H"), LINEAR_UNIT(delta_height)
@ -133,7 +133,7 @@
void GcodeSuite::M665_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_SCARA_SETTINGS " (" STR_SCARA_S TERN_(HAS_SCARA_OFFSET, " " STR_SCARA_P_T_Z) ")"));
SERIAL_ECHOLNPAIR_P(
SERIAL_ECHOLNPGM_P(
PSTR(" M665 S"), segments_per_second
#if HAS_SCARA_OFFSET
, SP_P_STR, scara_home_offset.a

18
Marlin/src/gcode/calibrate/M666.cpp
View file

@ -52,17 +52,17 @@
is_err = true;
else {
delta_endstop_adj[i] = v;
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("delta_endstop_adj[", AS_CHAR(AXIS_CHAR(i)), "] = ", v);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("delta_endstop_adj[", AS_CHAR(AXIS_CHAR(i)), "] = ", v);
}
}
}
if (is_err) SERIAL_ECHOLNPAIR("?M666 offsets must be <= 0");
if (is_err) SERIAL_ECHOLNPGM("?M666 offsets must be <= 0");
if (!is_set) M666_report();
}
void GcodeSuite::M666_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_ENDSTOP_ADJUSTMENT));
SERIAL_ECHOLNPAIR_P(
SERIAL_ECHOLNPGM_P(
PSTR(" M666 X"), LINEAR_UNIT(delta_endstop_adj.a)
, SP_Y_STR, LINEAR_UNIT(delta_endstop_adj.b)
, SP_Z_STR, LINEAR_UNIT(delta_endstop_adj.c)
@ -108,22 +108,22 @@
report_heading_etc(forReplay, PSTR(STR_ENDSTOP_ADJUSTMENT));
SERIAL_ECHOPGM(" M666");
#if ENABLED(X_DUAL_ENDSTOPS)
SERIAL_ECHOLNPAIR_P(SP_X_STR, LINEAR_UNIT(endstops.x2_endstop_adj));
SERIAL_ECHOLNPGM_P(SP_X_STR, LINEAR_UNIT(endstops.x2_endstop_adj));
#endif
#if ENABLED(Y_DUAL_ENDSTOPS)
SERIAL_ECHOLNPAIR_P(SP_Y_STR, LINEAR_UNIT(endstops.y2_endstop_adj));
SERIAL_ECHOLNPGM_P(SP_Y_STR, LINEAR_UNIT(endstops.y2_endstop_adj));
#endif
#if ENABLED(Z_MULTI_ENDSTOPS)
#if NUM_Z_STEPPER_DRIVERS >= 3
SERIAL_ECHOPAIR(" S2 Z", LINEAR_UNIT(endstops.z3_endstop_adj));
SERIAL_ECHOPGM(" S2 Z", LINEAR_UNIT(endstops.z3_endstop_adj));
report_echo_start(forReplay);
SERIAL_ECHOPAIR(" M666 S3 Z", LINEAR_UNIT(endstops.z3_endstop_adj));
SERIAL_ECHOPGM(" M666 S3 Z", LINEAR_UNIT(endstops.z3_endstop_adj));
#if NUM_Z_STEPPER_DRIVERS >= 4
report_echo_start(forReplay);
SERIAL_ECHOPAIR(" M666 S4 Z", LINEAR_UNIT(endstops.z4_endstop_adj));
SERIAL_ECHOPGM(" M666 S4 Z", LINEAR_UNIT(endstops.z4_endstop_adj));
#endif
#else
SERIAL_ECHOLNPAIR_P(SP_Z_STR, LINEAR_UNIT(endstops.z2_endstop_adj));
SERIAL_ECHOLNPGM_P(SP_Z_STR, LINEAR_UNIT(endstops.z2_endstop_adj));
#endif
#endif
}

18
Marlin/src/gcode/config/M200-M205.cpp
View file

@ -84,7 +84,7 @@
#if EXTRUDERS == 1
{
SERIAL_ECHOLNPAIR(
SERIAL_ECHOLNPGM(
" M200 S", parser.volumetric_enabled, " D", LINEAR_UNIT(planner.filament_size[0])
#if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
, " L", LINEAR_UNIT(planner.volumetric_extruder_limit[0])
@ -92,10 +92,10 @@
);
}
#else
SERIAL_ECHOLNPAIR(" M200 S", parser.volumetric_enabled);
SERIAL_ECHOLNPGM(" M200 S", parser.volumetric_enabled);
LOOP_L_N(i, EXTRUDERS) {
report_echo_start(forReplay);
SERIAL_ECHOLNPAIR(
SERIAL_ECHOLNPGM(
" M200 T", i, " D", LINEAR_UNIT(planner.filament_size[i])
#if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
, " L", LINEAR_UNIT(planner.volumetric_extruder_limit[i])
@ -134,7 +134,7 @@ void GcodeSuite::M201() {
void GcodeSuite::M201_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_MAX_ACCELERATION));
SERIAL_ECHOLNPAIR_P(
SERIAL_ECHOLNPGM_P(
LIST_N(DOUBLE(LINEAR_AXES),
PSTR(" M201 X"), LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[X_AXIS]),
SP_Y_STR, LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Y_AXIS]),
@ -150,7 +150,7 @@ void GcodeSuite::M201_report(const bool forReplay/*=true*/) {
#if ENABLED(DISTINCT_E_FACTORS)
LOOP_L_N(i, E_STEPPERS) {
report_echo_start(forReplay);
SERIAL_ECHOLNPAIR_P(
SERIAL_ECHOLNPGM_P(
PSTR(" M201 T"), i
, SP_E_STR, VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(i)])
);
@ -179,7 +179,7 @@ void GcodeSuite::M203() {
void GcodeSuite::M203_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_MAX_FEEDRATES));
SERIAL_ECHOLNPAIR_P(
SERIAL_ECHOLNPGM_P(
LIST_N(DOUBLE(LINEAR_AXES),
PSTR(" M203 X"), LINEAR_UNIT(planner.settings.max_feedrate_mm_s[X_AXIS]),
SP_Y_STR, LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Y_AXIS]),
@ -195,7 +195,7 @@ void GcodeSuite::M203_report(const bool forReplay/*=true*/) {
#if ENABLED(DISTINCT_E_FACTORS)
LOOP_L_N(i, E_STEPPERS) {
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR_P(
SERIAL_ECHOLNPGM_P(
PSTR(" M203 T"), i
, SP_E_STR, VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS_N(i)])
);
@ -225,7 +225,7 @@ void GcodeSuite::M204() {
void GcodeSuite::M204_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_ACCELERATION_P_R_T));
SERIAL_ECHOLNPAIR_P(
SERIAL_ECHOLNPGM_P(
PSTR(" M204 P"), LINEAR_UNIT(planner.settings.acceleration)
, PSTR(" R"), LINEAR_UNIT(planner.settings.retract_acceleration)
, SP_T_STR, LINEAR_UNIT(planner.settings.travel_acceleration)
@ -292,7 +292,7 @@ void GcodeSuite::M205_report(const bool forReplay/*=true*/) {
TERN_(HAS_CLASSIC_E_JERK, " E<max_e_jerk>")
")"
));
SERIAL_ECHOLNPAIR_P(
SERIAL_ECHOLNPGM_P(
PSTR(" M205 B"), LINEAR_UNIT(planner.settings.min_segment_time_us)
, PSTR(" S"), LINEAR_UNIT(planner.settings.min_feedrate_mm_s)
, SP_T_STR, LINEAR_UNIT(planner.settings.min_travel_feedrate_mm_s)

20
Marlin/src/gcode/config/M217.cpp
View file

@ -136,33 +136,33 @@ void GcodeSuite::M217_report(const bool forReplay/*=true*/) {
SERIAL_ECHOPGM(" M217");
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
SERIAL_ECHOPAIR(" S", LINEAR_UNIT(toolchange_settings.swap_length));
SERIAL_ECHOPAIR_P(SP_B_STR, LINEAR_UNIT(toolchange_settings.extra_resume),
SERIAL_ECHOPGM(" S", LINEAR_UNIT(toolchange_settings.swap_length));
SERIAL_ECHOPGM_P(SP_B_STR, LINEAR_UNIT(toolchange_settings.extra_resume),
SP_E_STR, LINEAR_UNIT(toolchange_settings.extra_prime),
SP_P_STR, LINEAR_UNIT(toolchange_settings.prime_speed));
SERIAL_ECHOPAIR(" R", LINEAR_UNIT(toolchange_settings.retract_speed),
SERIAL_ECHOPGM(" R", LINEAR_UNIT(toolchange_settings.retract_speed),
" U", LINEAR_UNIT(toolchange_settings.unretract_speed),
" F", toolchange_settings.fan_speed,
" G", toolchange_settings.fan_time);
#if ENABLED(TOOLCHANGE_MIGRATION_FEATURE)
SERIAL_ECHOPAIR(" A", migration.automode);
SERIAL_ECHOPAIR(" L", LINEAR_UNIT(migration.last));
SERIAL_ECHOPGM(" A", migration.automode);
SERIAL_ECHOPGM(" L", LINEAR_UNIT(migration.last));
#endif
#if ENABLED(TOOLCHANGE_PARK)
SERIAL_ECHOPAIR(" W", LINEAR_UNIT(toolchange_settings.enable_park));
SERIAL_ECHOPAIR_P(SP_X_STR, LINEAR_UNIT(toolchange_settings.change_point.x));
SERIAL_ECHOPAIR_P(SP_Y_STR, LINEAR_UNIT(toolchange_settings.change_point.y));
SERIAL_ECHOPGM(" W", LINEAR_UNIT(toolchange_settings.enable_park));
SERIAL_ECHOPGM_P(SP_X_STR, LINEAR_UNIT(toolchange_settings.change_point.x));
SERIAL_ECHOPGM_P(SP_Y_STR, LINEAR_UNIT(toolchange_settings.change_point.y));
#endif
#if ENABLED(TOOLCHANGE_FS_PRIME_FIRST_USED)
SERIAL_ECHOPAIR(" V", LINEAR_UNIT(enable_first_prime));
SERIAL_ECHOPGM(" V", LINEAR_UNIT(enable_first_prime));
#endif
#endif
SERIAL_ECHOLNPAIR_P(SP_Z_STR, LINEAR_UNIT(toolchange_settings.z_raise));
SERIAL_ECHOLNPGM_P(SP_Z_STR, LINEAR_UNIT(toolchange_settings.z_raise));
}
#endif // HAS_MULTI_EXTRUDER

2
Marlin/src/gcode/config/M218.cpp
View file

@ -60,7 +60,7 @@ void GcodeSuite::M218_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_HOTEND_OFFSETS));
LOOP_S_L_N(e, 1, HOTENDS) {
report_echo_start(forReplay);
SERIAL_ECHOPAIR_P(
SERIAL_ECHOPGM_P(
PSTR(" M218 T"), e,
SP_X_STR, LINEAR_UNIT(hotend_offset[e].x),
SP_Y_STR, LINEAR_UNIT(hotend_offset[e].y)

2
Marlin/src/gcode/config/M220.cpp
View file

@ -44,7 +44,7 @@ void GcodeSuite::M220() {
if (parser.seenval('S')) feedrate_percentage = parser.value_int();
if (!parser.seen_any()) {
SERIAL_ECHOPAIR("FR:", feedrate_percentage);
SERIAL_ECHOPGM("FR:", feedrate_percentage);
SERIAL_CHAR('%');
SERIAL_EOL();
}

2
Marlin/src/gcode/config/M221.cpp
View file

@ -38,7 +38,7 @@ void GcodeSuite::M221() {
else {
SERIAL_ECHO_START();
SERIAL_CHAR('E', '0' + target_extruder);
SERIAL_ECHOPAIR(" Flow: ", planner.flow_percentage[target_extruder]);
SERIAL_ECHOPGM(" Flow: ", planner.flow_percentage[target_extruder]);
SERIAL_CHAR('%');
SERIAL_EOL();
}

2
Marlin/src/gcode/config/M281.cpp
View file

@ -69,7 +69,7 @@ void GcodeSuite::M281_report(const bool forReplay/*=true*/) {
case Z_PROBE_SERVO_NR:
#endif
report_echo_start(forReplay);
SERIAL_ECHOLNPAIR(" M281 P", i, " L", servo_angles[i][0], " U", servo_angles[i][1]);
SERIAL_ECHOLNPGM(" M281 P", i, " L", servo_angles[i][0], " U", servo_angles[i][1]);
}
}
}

8
Marlin/src/gcode/config/M301.cpp
View file

@ -83,7 +83,7 @@ void GcodeSuite::M301_report(const bool forReplay/*=true*/, const int8_t eindex/
HOTEND_LOOP() {
if (e == eindex || eindex == -1) {
report_echo_start(forReplay);
SERIAL_ECHOPAIR_P(
SERIAL_ECHOPGM_P(
#if ENABLED(PID_PARAMS_PER_HOTEND)
PSTR(" M301 E"), e, SP_P_STR
#else
@ -94,11 +94,11 @@ void GcodeSuite::M301_report(const bool forReplay/*=true*/, const int8_t eindex/
, PSTR(" D"), unscalePID_d(PID_PARAM(Kd, e))
);
#if ENABLED(PID_EXTRUSION_SCALING)
SERIAL_ECHOPAIR_P(SP_C_STR, PID_PARAM(Kc, e));
if (e == 0) SERIAL_ECHOPAIR(" L", thermalManager.lpq_len);
SERIAL_ECHOPGM_P(SP_C_STR, PID_PARAM(Kc, e));
if (e == 0) SERIAL_ECHOPGM(" L", thermalManager.lpq_len);
#endif
#if ENABLED(PID_FAN_SCALING)
SERIAL_ECHOPAIR(" F", PID_PARAM(Kf, e));
SERIAL_ECHOPGM(" F", PID_PARAM(Kf, e));
#endif
SERIAL_EOL();
}

2
Marlin/src/gcode/config/M302.cpp
View file

@ -56,7 +56,7 @@ void GcodeSuite::M302() {
SERIAL_ECHO_START();
SERIAL_ECHOPGM("Cold extrudes are ");
SERIAL_ECHOPGM_P(thermalManager.allow_cold_extrude ? PSTR("en") : PSTR("dis"));
SERIAL_ECHOLNPAIR("abled (min temp ", thermalManager.extrude_min_temp, "C)");
SERIAL_ECHOLNPGM("abled (min temp ", thermalManager.extrude_min_temp, "C)");
}
}

2
Marlin/src/gcode/config/M309.cpp
View file

@ -43,7 +43,7 @@ void GcodeSuite::M309() {
void GcodeSuite::M309_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_CHAMBER_PID));
SERIAL_ECHOLNPAIR(
SERIAL_ECHOLNPGM(
" M309 P", thermalManager.temp_chamber.pid.Kp
, " I", unscalePID_i(thermalManager.temp_chamber.pid.Ki)
, " D", unscalePID_d(thermalManager.temp_chamber.pid.Kd)

12
Marlin/src/gcode/config/M43.cpp
View file

@ -130,7 +130,7 @@ inline void servo_probe_test() {
const uint8_t probe_index = parser.byteval('P', Z_PROBE_SERVO_NR);
SERIAL_ECHOLNPAIR("Servo probe test\n"
SERIAL_ECHOLNPGM("Servo probe test\n"
". using index: ", probe_index,
", deploy angle: ", servo_angles[probe_index][0],
", stow angle: ", servo_angles[probe_index][1]
@ -143,7 +143,7 @@ inline void servo_probe_test() {
#define PROBE_TEST_PIN Z_MIN_PIN
constexpr bool probe_inverting = Z_MIN_ENDSTOP_INVERTING;
SERIAL_ECHOLNPAIR(". Probe Z_MIN_PIN: ", PROBE_TEST_PIN);
SERIAL_ECHOLNPGM(". Probe Z_MIN_PIN: ", PROBE_TEST_PIN);
SERIAL_ECHOPGM(". Z_MIN_ENDSTOP_INVERTING: ");
#else
@ -151,7 +151,7 @@ inline void servo_probe_test() {
#define PROBE_TEST_PIN Z_MIN_PROBE_PIN
constexpr bool probe_inverting = Z_MIN_PROBE_ENDSTOP_INVERTING;
SERIAL_ECHOLNPAIR(". Probe Z_MIN_PROBE_PIN: ", PROBE_TEST_PIN);
SERIAL_ECHOLNPGM(". Probe Z_MIN_PROBE_PIN: ", PROBE_TEST_PIN);
SERIAL_ECHOPGM( ". Z_MIN_PROBE_ENDSTOP_INVERTING: ");
#endif
@ -211,11 +211,11 @@ inline void servo_probe_test() {
if (deploy_state != stow_state) {
SERIAL_ECHOLNPGM("= Mechanical Switch detected");
if (deploy_state) {
SERIAL_ECHOLNPAIR(" DEPLOYED state: HIGH (logic 1)",
SERIAL_ECHOLNPGM(" DEPLOYED state: HIGH (logic 1)",
" STOWED (triggered) state: LOW (logic 0)");
}
else {
SERIAL_ECHOLNPAIR(" DEPLOYED state: LOW (logic 0)",
SERIAL_ECHOLNPGM(" DEPLOYED state: LOW (logic 0)",
" STOWED (triggered) state: HIGH (logic 1)");
}
#if ENABLED(BLTOUCH)
@ -244,7 +244,7 @@ inline void servo_probe_test() {
if (probe_counter == 15)
SERIAL_ECHOLNPGM(": 30ms or more");
else
SERIAL_ECHOLNPAIR(" (+/- 4ms): ", probe_counter * 2);
SERIAL_ECHOLNPGM(" (+/- 4ms): ", probe_counter * 2);
if (probe_counter >= 4) {
if (probe_counter == 15) {

10
Marlin/src/gcode/config/M92.cpp
View file

@ -78,10 +78,10 @@ void GcodeSuite::M92() {
micro_steps = argH ?: Z_MICROSTEPS;
const float z_full_step_mm = micro_steps * planner.steps_to_mm[Z_AXIS];
SERIAL_ECHO_START();
SERIAL_ECHOPAIR("{ micro_steps:", micro_steps, ", z_full_step_mm:", z_full_step_mm);
SERIAL_ECHOPGM("{ micro_steps:", micro_steps, ", z_full_step_mm:", z_full_step_mm);
if (wanted) {
const float best = uint16_t(wanted / z_full_step_mm) * z_full_step_mm;
SERIAL_ECHOPAIR(", best:[", best);
SERIAL_ECHOPGM(", best:[", best);
if (best != wanted) { SERIAL_CHAR(','); SERIAL_DECIMAL(best + z_full_step_mm); }
SERIAL_CHAR(']');
}
@ -92,7 +92,7 @@ void GcodeSuite::M92() {
void GcodeSuite::M92_report(const bool forReplay/*=true*/, const int8_t e/*=-1*/) {
report_heading_etc(forReplay, PSTR(STR_STEPS_PER_UNIT));
SERIAL_ECHOPAIR_P(LIST_N(DOUBLE(LINEAR_AXES),
SERIAL_ECHOPGM_P(LIST_N(DOUBLE(LINEAR_AXES),
PSTR(" M92 X"), LINEAR_UNIT(planner.settings.axis_steps_per_mm[X_AXIS]),
SP_Y_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[Y_AXIS]),
SP_Z_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[Z_AXIS]),
@ -101,7 +101,7 @@ void GcodeSuite::M92_report(const bool forReplay/*=true*/, const int8_t e/*=-1*/
SP_K_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[K_AXIS]))
);
#if HAS_EXTRUDERS && DISABLED(DISTINCT_E_FACTORS)
SERIAL_ECHOPAIR_P(SP_E_STR, VOLUMETRIC_UNIT(planner.settings.axis_steps_per_mm[E_AXIS]));
SERIAL_ECHOPGM_P(SP_E_STR, VOLUMETRIC_UNIT(planner.settings.axis_steps_per_mm[E_AXIS]));
#endif
SERIAL_EOL();
@ -109,7 +109,7 @@ void GcodeSuite::M92_report(const bool forReplay/*=true*/, const int8_t e/*=-1*/
LOOP_L_N(i, E_STEPPERS) {
if (e >= 0 && i != e) continue;
report_echo_start(forReplay);
SERIAL_ECHOLNPAIR_P(
SERIAL_ECHOLNPGM_P(
PSTR(" M92 T"), i,
SP_E_STR, VOLUMETRIC_UNIT(planner.settings.axis_steps_per_mm[E_AXIS_N(i)])
);

8
Marlin/src/gcode/control/M111.cpp
View file

@ -57,19 +57,19 @@ void GcodeSuite::M111() {
SERIAL_ECHOPGM(STR_DEBUG_OFF);
#if !defined(__AVR__) || !defined(USBCON)
#if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS)
SERIAL_ECHOPAIR("\nBuffer Overruns: ", MYSERIAL1.buffer_overruns());
SERIAL_ECHOPGM("\nBuffer Overruns: ", MYSERIAL1.buffer_overruns());
#endif
#if ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS)
SERIAL_ECHOPAIR("\nFraming Errors: ", MYSERIAL1.framing_errors());
SERIAL_ECHOPGM("\nFraming Errors: ", MYSERIAL1.framing_errors());
#endif
#if ENABLED(SERIAL_STATS_DROPPED_RX)
SERIAL_ECHOPAIR("\nDropped bytes: ", MYSERIAL1.dropped());
SERIAL_ECHOPGM("\nDropped bytes: ", MYSERIAL1.dropped());
#endif
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
SERIAL_ECHOPAIR("\nMax RX Queue Size: ", MYSERIAL1.rxMaxEnqueued());
SERIAL_ECHOPGM("\nMax RX Queue Size: ", MYSERIAL1.rxMaxEnqueued());
#endif
#endif // !__AVR__ || !USBCON
}

2
Marlin/src/gcode/control/M211.cpp
View file

@ -41,7 +41,7 @@ void GcodeSuite::M211() {
void GcodeSuite::M211_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_SOFT_ENDSTOPS));
SERIAL_ECHOPAIR(" M211 S", AS_DIGIT(soft_endstop._enabled), " ; ");
SERIAL_ECHOPGM(" M211 S", AS_DIGIT(soft_endstop._enabled), " ; ");
serialprintln_onoff(soft_endstop._enabled);
report_echo_start(forReplay);

30
Marlin/src/gcode/control/M605.cpp
View file

@ -127,26 +127,26 @@
case DXC_DUPLICATION_MODE: DEBUG_ECHOPGM("DUPLICATION"); break;
case DXC_MIRRORED_MODE: DEBUG_ECHOPGM("MIRRORED"); break;
}
DEBUG_ECHOPAIR("\nActive Ext: ", active_extruder);
DEBUG_ECHOPGM("\nActive Ext: ", active_extruder);
if (!active_extruder_parked) DEBUG_ECHOPGM(" NOT ");
DEBUG_ECHOPGM(" parked.");
DEBUG_ECHOPAIR("\nactive_extruder_x_pos: ", current_position.x);
DEBUG_ECHOPAIR("\ninactive_extruder_x: ", inactive_extruder_x);
DEBUG_ECHOPAIR("\nextruder_duplication_enabled: ", extruder_duplication_enabled);
DEBUG_ECHOPAIR("\nduplicate_extruder_x_offset: ", duplicate_extruder_x_offset);
DEBUG_ECHOPAIR("\nduplicate_extruder_temp_offset: ", duplicate_extruder_temp_offset);
DEBUG_ECHOPAIR("\ndelayed_move_time: ", delayed_move_time);
DEBUG_ECHOPAIR("\nX1 Home X: ", x_home_pos(0), "\nX1_MIN_POS=", X1_MIN_POS, "\nX1_MAX_POS=", X1_MAX_POS);
DEBUG_ECHOPAIR("\nX2 Home X: ", x_home_pos(1), "\nX2_MIN_POS=", X2_MIN_POS, "\nX2_MAX_POS=", X2_MAX_POS);
DEBUG_ECHOPAIR("\nX2_HOME_DIR=", X2_HOME_DIR, "\nX2_HOME_POS=", X2_HOME_POS);
DEBUG_ECHOPAIR("\nDEFAULT_DUAL_X_CARRIAGE_MODE=", STRINGIFY(DEFAULT_DUAL_X_CARRIAGE_MODE));
DEBUG_ECHOPAIR("\toolchange_settings.z_raise=", toolchange_settings.z_raise);
DEBUG_ECHOPAIR("\nDEFAULT_DUPLICATION_X_OFFSET=", DEFAULT_DUPLICATION_X_OFFSET);
DEBUG_ECHOPGM("\nactive_extruder_x_pos: ", current_position.x);
DEBUG_ECHOPGM("\ninactive_extruder_x: ", inactive_extruder_x);
DEBUG_ECHOPGM("\nextruder_duplication_enabled: ", extruder_duplication_enabled);
DEBUG_ECHOPGM("\nduplicate_extruder_x_offset: ", duplicate_extruder_x_offset);
DEBUG_ECHOPGM("\nduplicate_extruder_temp_offset: ", duplicate_extruder_temp_offset);
DEBUG_ECHOPGM("\ndelayed_move_time: ", delayed_move_time);
DEBUG_ECHOPGM("\nX1 Home X: ", x_home_pos(0), "\nX1_MIN_POS=", X1_MIN_POS, "\nX1_MAX_POS=", X1_MAX_POS);
DEBUG_ECHOPGM("\nX2 Home X: ", x_home_pos(1), "\nX2_MIN_POS=", X2_MIN_POS, "\nX2_MAX_POS=", X2_MAX_POS);
DEBUG_ECHOPGM("\nX2_HOME_DIR=", X2_HOME_DIR, "\nX2_HOME_POS=", X2_HOME_POS);
DEBUG_ECHOPGM("\nDEFAULT_DUAL_X_CARRIAGE_MODE=", STRINGIFY(DEFAULT_DUAL_X_CARRIAGE_MODE));
DEBUG_ECHOPGM("\toolchange_settings.z_raise=", toolchange_settings.z_raise);
DEBUG_ECHOPGM("\nDEFAULT_DUPLICATION_X_OFFSET=", DEFAULT_DUPLICATION_X_OFFSET);
DEBUG_EOL();
HOTEND_LOOP() {
DEBUG_ECHOPAIR_P(SP_T_STR, e);
LOOP_LINEAR_AXES(a) DEBUG_ECHOPAIR(" hotend_offset[", e, "].", AS_CHAR(AXIS_CHAR(a) | 0x20), "=", hotend_offset[e][a]);
DEBUG_ECHOPGM_P(SP_T_STR, e);
LOOP_LINEAR_AXES(a) DEBUG_ECHOPGM(" hotend_offset[", e, "].", AS_CHAR(AXIS_CHAR(a) | 0x20), "=", hotend_offset[e][a]);
DEBUG_EOL();
}
DEBUG_EOL();

4
Marlin/src/gcode/control/M993_M994.cpp
View file

@ -37,7 +37,7 @@ void GcodeSuite::M993() {
char fname[] = "spiflash.bin";
card.openFileWrite(fname);
if (!card.isFileOpen()) {
SERIAL_ECHOLNPAIR("Failed to open ", fname, " to write.");
SERIAL_ECHOLNPGM("Failed to open ", fname, " to write.");
return;
}
@ -65,7 +65,7 @@ void GcodeSuite::M994() {
char fname[] = "spiflash.bin";
card.openFileRead(fname);
if (!card.isFileOpen()) {
SERIAL_ECHOLNPAIR("Failed to open ", fname, " to read.");
SERIAL_ECHOLNPGM("Failed to open ", fname, " to read.");
return;
}

2
Marlin/src/gcode/control/T.cpp
View file

@ -49,7 +49,7 @@
void GcodeSuite::T(const int8_t tool_index) {
DEBUG_SECTION(log_T, "T", DEBUGGING(LEVELING));
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("...(", tool_index, ")");
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("...(", tool_index, ")");
// Count this command as movement / activity
reset_stepper_timeout();

6
Marlin/src/gcode/eeprom/M500-M504.cpp
View file

@ -75,14 +75,14 @@ void GcodeSuite::M502() {
if (dowrite) {
val = parser.byteval('V');
persistentStore.write_data(addr, &val);
SERIAL_ECHOLNPAIR("Wrote address ", addr, " with ", val);
SERIAL_ECHOLNPGM("Wrote address ", addr, " with ", val);
}
else {
if (parser.seenval('T')) {
const int endaddr = parser.value_ushort();
while (addr <= endaddr) {
persistentStore.read_data(addr, &val);
SERIAL_ECHOLNPAIR("0x", hex_word(addr), ":", hex_byte(val));
SERIAL_ECHOLNPGM("0x", hex_word(addr), ":", hex_byte(val));
addr++;
safe_delay(10);
}
@ -90,7 +90,7 @@ void GcodeSuite::M502() {
}
else {
persistentStore.read_data(addr, &val);
SERIAL_ECHOLNPAIR("Read address ", addr, " and got ", val);
SERIAL_ECHOLNPGM("Read address ", addr, " and got ", val);
}
}
return;

2
Marlin/src/gcode/feature/L6470/M122.cpp
View file

@ -68,7 +68,7 @@ inline void L6470_say_status(const L64XX_axis_t axis) {
if (!(sh.STATUS_AXIS & sh.STATUS_AXIS_WRONG_CMD)) SERIAL_ECHOPGM("IN");
SERIAL_ECHOPGM("VALID ");
SERIAL_ECHOPGM_P(sh.STATUS_AXIS & sh.STATUS_AXIS_NOTPERF_CMD ? PSTR("COMPLETED ") : PSTR("Not PERFORMED"));
SERIAL_ECHOPAIR("\n...THERMAL: ", !(sh.STATUS_AXIS & sh.STATUS_AXIS_TH_SD) ? "SHUTDOWN " : !(sh.STATUS_AXIS & sh.STATUS_AXIS_TH_WRN) ? "WARNING " : "OK ");
SERIAL_ECHOPGM("\n...THERMAL: ", !(sh.STATUS_AXIS & sh.STATUS_AXIS_TH_SD) ? "SHUTDOWN " : !(sh.STATUS_AXIS & sh.STATUS_AXIS_TH_WRN) ? "WARNING " : "OK ");
}
SERIAL_ECHOPGM(" OVERCURRENT:"); echo_yes_no((sh.STATUS_AXIS & sh.STATUS_AXIS_OCD) == 0);
if (sh.STATUS_AXIS_LAYOUT != L6474_STATUS_LAYOUT) {

12
Marlin/src/gcode/feature/L6470/M906.cpp
View file

@ -63,7 +63,7 @@ void L64XX_report_current(L64XX &motor, const L64XX_axis_t axis) {
#if ENABLED(L6470_CHITCHAT)
char tmp[10];
sprintf_P(tmp, PSTR("%4x "), status);
DEBUG_ECHOPAIR(" status: ", tmp);
DEBUG_ECHOPGM(" status: ", tmp);
print_bin(status);
#else
UNUSED(status);
@ -104,13 +104,13 @@ void L64XX_report_current(L64XX &motor, const L64XX_axis_t axis) {
}
SERIAL_EOL();
SERIAL_ECHOPAIR("...MicroSteps: ", MicroSteps,
SERIAL_ECHOPGM("...MicroSteps: ", MicroSteps,
" ADC_OUT: ", L6470_ADC_out);
SERIAL_ECHOPGM(" Vs_compensation: ");
SERIAL_ECHOPGM_P((motor.GetParam(sh.L6470_AXIS_CONFIG) & CONFIG_EN_VSCOMP) ? PSTR("ENABLED ") : PSTR("DISABLED"));
SERIAL_ECHOLNPAIR(" Compensation coefficient: ~", comp_coef * 0.01f);
SERIAL_ECHOLNPGM(" Compensation coefficient: ~", comp_coef * 0.01f);
SERIAL_ECHOPAIR("...KVAL_HOLD: ", motor.GetParam(L6470_KVAL_HOLD),
SERIAL_ECHOPGM("...KVAL_HOLD: ", motor.GetParam(L6470_KVAL_HOLD),
" KVAL_RUN : ", motor.GetParam(L6470_KVAL_RUN),
" KVAL_ACC: ", motor.GetParam(L6470_KVAL_ACC),
" KVAL_DEC: ", motor.GetParam(L6470_KVAL_DEC),
@ -168,7 +168,7 @@ void L64XX_report_current(L64XX &motor, const L64XX_axis_t axis) {
SERIAL_ECHOLNPGM(" mA) Motor Status: NA");
const uint16_t MicroSteps = _BV(motor.GetParam(L6470_STEP_MODE) & 0x07); //NOMORE(MicroSteps, 16);
SERIAL_ECHOPAIR("...MicroSteps: ", MicroSteps,
SERIAL_ECHOPGM("...MicroSteps: ", MicroSteps,
" ADC_OUT: ", L6470_ADC_out);
SERIAL_ECHOLNPGM(" Vs_compensation: NA\n");
@ -185,7 +185,7 @@ void L64XX_report_current(L64XX &motor, const L64XX_axis_t axis) {
case 1: DEBUG_ECHOLNPGM("75V/uS") ; break;
case 2: DEBUG_ECHOLNPGM("110V/uS") ; break;
case 3: DEBUG_ECHOLNPGM("260V/uS") ; break;
default: DEBUG_ECHOLNPAIR("slew rate: ", (motor.GetParam(sh.L6470_AXIS_CONFIG) & CONFIG_POW_SR) >> CONFIG_POW_SR_BIT); break;
default: DEBUG_ECHOLNPGM("slew rate: ", (motor.GetParam(sh.L6470_AXIS_CONFIG) & CONFIG_POW_SR) >> CONFIG_POW_SR_BIT); break;
}
#endif
SERIAL_EOL();

28
Marlin/src/gcode/feature/L6470/M916-918.cpp
View file

@ -96,7 +96,7 @@ void GcodeSuite::M916() {
if (L64xxManager.get_user_input(driver_count, axis_index, axis_mon, position_max, position_min, final_feedrate, kval_hold, over_current_flag, OCD_TH_val, STALL_TH_val, over_current_threshold))
return; // quit if invalid user input
DEBUG_ECHOLNPAIR("feedrate = ", final_feedrate);
DEBUG_ECHOLNPGM("feedrate = ", final_feedrate);
planner.synchronize(); // wait for all current movement commands to complete
@ -127,9 +127,9 @@ void GcodeSuite::M916() {
do {
if (sh.STATUS_AXIS_LAYOUT == L6474_STATUS_LAYOUT)
DEBUG_ECHOLNPAIR("TVAL current (mA) = ", (M91x_counter + 1) * sh.AXIS_STALL_CURRENT_CONSTANT_INV); // report TVAL current for this run
DEBUG_ECHOLNPGM("TVAL current (mA) = ", (M91x_counter + 1) * sh.AXIS_STALL_CURRENT_CONSTANT_INV); // report TVAL current for this run
else
DEBUG_ECHOLNPAIR("kval_hold = ", M91x_counter); // report KVAL_HOLD for this run
DEBUG_ECHOLNPGM("kval_hold = ", M91x_counter); // report KVAL_HOLD for this run
for (j = 0; j < driver_count; j++)
L64xxManager.set_param(axis_index[j], L6470_KVAL_HOLD, M91x_counter); //set KVAL_HOLD or TVAL (same register address)
@ -236,7 +236,7 @@ void GcodeSuite::M917() {
if (L64xxManager.get_user_input(driver_count, axis_index, axis_mon, position_max, position_min, final_feedrate, kval_hold, over_current_flag, OCD_TH_val, STALL_TH_val, over_current_threshold))
return; // quit if invalid user input
DEBUG_ECHOLNPAIR("feedrate = ", final_feedrate);
DEBUG_ECHOLNPGM("feedrate = ", final_feedrate);
planner.synchronize(); // wait for all current movement commands to complete
@ -252,18 +252,18 @@ void GcodeSuite::M917() {
// 2 - OCD finalized - decreasing STALL - exit when STALL warning happens
// 3 - OCD finalized - increasing STALL - exit when STALL warning stop
// 4 - all testing completed
DEBUG_ECHOPAIR(".\n.\n.\nover_current threshold : ", (OCD_TH_val + 1) * 375); // first status display
DEBUG_ECHOPAIR(" (OCD_TH: : ", OCD_TH_val);
DEBUG_ECHOPGM(".\n.\n.\nover_current threshold : ", (OCD_TH_val + 1) * 375); // first status display
DEBUG_ECHOPGM(" (OCD_TH: : ", OCD_TH_val);
if (sh.STATUS_AXIS_LAYOUT != L6474_STATUS_LAYOUT) {
DEBUG_ECHOPAIR(") Stall threshold: ", (STALL_TH_val + 1) * 31.25);
DEBUG_ECHOPAIR(" (STALL_TH: ", STALL_TH_val);
DEBUG_ECHOPGM(") Stall threshold: ", (STALL_TH_val + 1) * 31.25);
DEBUG_ECHOPGM(" (STALL_TH: ", STALL_TH_val);
}
DEBUG_ECHOLNPGM(")");
do {
if (sh.STATUS_AXIS_LAYOUT != L6474_STATUS_LAYOUT) DEBUG_ECHOPAIR("STALL threshold : ", (STALL_TH_val + 1) * 31.25);
DEBUG_ECHOLNPAIR(" OCD threshold : ", (OCD_TH_val + 1) * 375);
if (sh.STATUS_AXIS_LAYOUT != L6474_STATUS_LAYOUT) DEBUG_ECHOPGM("STALL threshold : ", (STALL_TH_val + 1) * 31.25);
DEBUG_ECHOLNPGM(" OCD threshold : ", (OCD_TH_val + 1) * 375);
sprintf_P(gcode_string, PSTR("G0 %s%03d F%03d"), temp_axis_string, uint16_t(position_min), uint16_t(final_feedrate));
gcode.process_subcommands_now_P(gcode_string);
@ -303,7 +303,7 @@ void GcodeSuite::M917() {
if (!(k % 4)) {
kval_hold *= 0.95;
DEBUG_EOL();
DEBUG_ECHOLNPAIR("Lowering KVAL_HOLD by about 5% to ", kval_hold);
DEBUG_ECHOLNPGM("Lowering KVAL_HOLD by about 5% to ", kval_hold);
for (j = 0; j < driver_count; j++)
L64xxManager.set_param(axis_index[j], L6470_KVAL_HOLD, kval_hold);
}
@ -590,8 +590,8 @@ void GcodeSuite::M918() {
}
m_steps = L64xxManager.get_param(axis_index[0], L6470_STEP_MODE) & 0x07; // get microsteps
DEBUG_ECHOLNPAIR("Microsteps = ", _BV(m_steps));
DEBUG_ECHOLNPAIR("target (maximum) feedrate = ", final_feedrate);
DEBUG_ECHOLNPGM("Microsteps = ", _BV(m_steps));
DEBUG_ECHOLNPGM("target (maximum) feedrate = ", final_feedrate);
const float feedrate_inc = final_feedrate / 10, // Start at 1/10 of max & go up by 1/10 per step
fr_limit = final_feedrate * 0.99f; // Rounding-safe comparison value
@ -612,7 +612,7 @@ void GcodeSuite::M918() {
do {
current_feedrate += feedrate_inc;
DEBUG_ECHOLNPAIR("...feedrate = ", current_feedrate);
DEBUG_ECHOLNPGM("...feedrate = ", current_feedrate);
sprintf_P(gcode_string, PSTR("G0 %s%03d F%03d"), temp_axis_string, uint16_t(position_min), uint16_t(current_feedrate));
gcode.process_subcommands_now_P(gcode_string);

10
Marlin/src/gcode/feature/advance/M900.cpp
View file

@ -115,11 +115,11 @@ void GcodeSuite::M900() {
#if ENABLED(EXTRA_LIN_ADVANCE_K)
#if EXTRUDERS < 2
SERIAL_ECHOLNPAIR("Advance S", new_slot, " K", kref, "(S", !new_slot, " K", lref, ")");
SERIAL_ECHOLNPGM("Advance S", new_slot, " K", kref, "(S", !new_slot, " K", lref, ")");
#else
LOOP_L_N(i, EXTRUDERS) {
const bool slot = TEST(lin_adv_slot, i);
SERIAL_ECHOLNPAIR("Advance T", i, " S", slot, " K", planner.extruder_advance_K[i],
SERIAL_ECHOLNPGM("Advance T", i, " S", slot, " K", planner.extruder_advance_K[i],
"(S", !slot, " K", other_extruder_advance_K[i], ")");
SERIAL_EOL();
}
@ -129,7 +129,7 @@ void GcodeSuite::M900() {
SERIAL_ECHO_START();
#if EXTRUDERS < 2
SERIAL_ECHOLNPAIR("Advance K=", planner.extruder_advance_K[0]);
SERIAL_ECHOLNPGM("Advance K=", planner.extruder_advance_K[0]);
#else
SERIAL_ECHOPGM("Advance K");
LOOP_L_N(i, EXTRUDERS) {
@ -148,11 +148,11 @@ void GcodeSuite::M900_report(const bool forReplay/*=true*/) {
report_heading(forReplay, PSTR(STR_LINEAR_ADVANCE));
#if EXTRUDERS < 2
report_echo_start(forReplay);
SERIAL_ECHOLNPAIR(" M900 K", planner.extruder_advance_K[0]);
SERIAL_ECHOLNPGM(" M900 K", planner.extruder_advance_K[0]);
#else
LOOP_L_N(i, EXTRUDERS) {
report_echo_start(forReplay);
SERIAL_ECHOLNPAIR(" M900 T", i, " K", planner.extruder_advance_K[i]);
SERIAL_ECHOLNPGM(" M900 T", i, " K", planner.extruder_advance_K[i]);
}
#endif
}

2
Marlin/src/gcode/feature/controllerfan/M710.cpp
View file

@ -68,7 +68,7 @@ void GcodeSuite::M710() {
void GcodeSuite::M710_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_CONTROLLER_FAN));
SERIAL_ECHOLNPAIR(" M710"
SERIAL_ECHOLNPGM(" M710"
" S", int(controllerFan.settings.active_speed),
" I", int(controllerFan.settings.idle_speed),
" A", int(controllerFan.settings.auto_mode),

2
Marlin/src/gcode/feature/digipot/M907-M910.cpp
View file

@ -102,7 +102,7 @@ void GcodeSuite::M907() {
void GcodeSuite::M907_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_STEPPER_MOTOR_CURRENTS));
#if HAS_MOTOR_CURRENT_PWM
SERIAL_ECHOLNPAIR_P( // PWM-based has 3 values:
SERIAL_ECHOLNPGM_P( // PWM-based has 3 values:
PSTR(" M907 X"), stepper.motor_current_setting[0] // X and Y
, SP_Z_STR, stepper.motor_current_setting[1] // Z
, SP_E_STR, stepper.motor_current_setting[2] // E

4
Marlin/src/gcode/feature/filwidth/M404-M407.cpp
View file

@ -38,7 +38,7 @@ void GcodeSuite::M404() {
planner.volumetric_area_nominal = CIRCLE_AREA(filwidth.nominal_mm * 0.5);
}
else
SERIAL_ECHOLNPAIR("Filament dia (nominal mm):", filwidth.nominal_mm);
SERIAL_ECHOLNPGM("Filament dia (nominal mm):", filwidth.nominal_mm);
}
/**
@ -65,7 +65,7 @@ void GcodeSuite::M406() {
* M407: Get measured filament diameter on serial output
*/
void GcodeSuite::M407() {
SERIAL_ECHOLNPAIR("Filament dia (measured mm):", filwidth.measured_mm);
SERIAL_ECHOLNPGM("Filament dia (measured mm):", filwidth.measured_mm);
}
#endif // FILAMENT_WIDTH_SENSOR

6
Marlin/src/gcode/feature/mixing/M166.cpp
View file

@ -30,12 +30,12 @@
#include "../../../feature/mixing.h"
inline void echo_mix() {
SERIAL_ECHOPAIR(" (", mixer.mix[0], "%|", mixer.mix[1], "%)");
SERIAL_ECHOPGM(" (", mixer.mix[0], "%|", mixer.mix[1], "%)");
}
inline void echo_zt(const int t, const_float_t z) {
mixer.update_mix_from_vtool(t);
SERIAL_ECHOPAIR_P(SP_Z_STR, z, SP_T_STR, t);
SERIAL_ECHOPGM_P(SP_Z_STR, z, SP_T_STR, t);
echo_mix();
}
@ -74,7 +74,7 @@ void GcodeSuite::M166() {
#if ENABLED(GRADIENT_VTOOL)
if (mixer.gradient.vtool_index >= 0) {
SERIAL_ECHOPAIR(" (T", mixer.gradient.vtool_index);
SERIAL_ECHOPGM(" (T", mixer.gradient.vtool_index);
SERIAL_CHAR(')');
}
#endif

2
Marlin/src/gcode/feature/password/M510-M512.cpp
View file

@ -66,7 +66,7 @@ void GcodeSuite::M510() {
if (password.value_entry < CAT(1e, PASSWORD_LENGTH)) {
password.is_set = true;
password.value = password.value_entry;
SERIAL_ECHOLNPAIR(STR_PASSWORD_SET, password.value); // TODO: Update password.string
SERIAL_ECHOLNPGM(STR_PASSWORD_SET, password.value); // TODO: Update password.string
}
else
SERIAL_ECHOLNPGM(STR_PASSWORD_TOO_LONG);

2
Marlin/src/gcode/feature/pause/G60.cpp
View file

@ -47,7 +47,7 @@ void GcodeSuite::G60() {
SBI(saved_slots[slot >> 3], slot & 0x07);
#if ENABLED(SAVED_POSITIONS_DEBUG)
DEBUG_ECHOPAIR(STR_SAVED_POS " S", slot);
DEBUG_ECHOPGM(STR_SAVED_POS " S", slot);
const xyze_pos_t &pos = stored_position[slot];
DEBUG_ECHOLNPAIR_F_P(
LIST_N(DOUBLE(LOGICAL_AXES), SP_E_STR, pos.e,

4
Marlin/src/gcode/feature/pause/G61.cpp
View file

@ -69,7 +69,7 @@ void GcodeSuite::G61(void) {
}
else {
if (parser.seen(LINEAR_AXIS_GANG("X", "Y", "Z", AXIS4_STR, AXIS5_STR, AXIS6_STR))) {
DEBUG_ECHOPAIR(STR_RESTORING_POS " S", slot);
DEBUG_ECHOPGM(STR_RESTORING_POS " S", slot);
LOOP_LINEAR_AXES(i) {
destination[i] = parser.seen(AXIS_CHAR(i))
? stored_position[slot][i] + parser.value_axis_units((AxisEnum)i)
@ -83,7 +83,7 @@ void GcodeSuite::G61(void) {
}
#if HAS_EXTRUDERS
if (parser.seen_test('E')) {
DEBUG_ECHOLNPAIR(STR_RESTORING_POS " S", slot, " E", current_position.e, "=>", stored_position[slot].e);
DEBUG_ECHOLNPGM(STR_RESTORING_POS " S", slot, " E", current_position.e, "=>", stored_position[slot].e);
SYNC_E(stored_position[slot].e);
}
#endif

4
Marlin/src/gcode/feature/pause/M603.cpp
View file

@ -69,12 +69,12 @@ void GcodeSuite::M603_report(const bool forReplay/*=true*/) {
#if EXTRUDERS == 1
report_echo_start(forReplay);
SERIAL_ECHOPAIR(" M603 L", LINEAR_UNIT(fc_settings[0].load_length), " U", LINEAR_UNIT(fc_settings[0].unload_length), " ;");
SERIAL_ECHOPGM(" M603 L", LINEAR_UNIT(fc_settings[0].load_length), " U", LINEAR_UNIT(fc_settings[0].unload_length), " ;");
say_units();
#else
LOOP_L_N(e, EXTRUDERS) {
report_echo_start(forReplay);
SERIAL_ECHOPAIR(" M603 T", e, " L", LINEAR_UNIT(fc_settings[e].load_length), " U", LINEAR_UNIT(fc_settings[e].unload_length), " ;");
SERIAL_ECHOPGM(" M603 T", e, " L", LINEAR_UNIT(fc_settings[e].load_length), " U", LINEAR_UNIT(fc_settings[e].unload_length), " ;");
say_units();
}
#endif

2
Marlin/src/gcode/feature/power_monitor/M430.cpp
View file

@ -50,7 +50,7 @@ void GcodeSuite::M430() {
#endif
#endif
if (do_report) {
SERIAL_ECHOLNPAIR(
SERIAL_ECHOLNPGM(
#if ENABLED(POWER_MONITOR_CURRENT)
"Current: ", power_monitor.getAmps(), "A"
#if ENABLED(POWER_MONITOR_VOLTAGE)

2
Marlin/src/gcode/feature/powerloss/M413.cpp
View file

@ -58,7 +58,7 @@ void GcodeSuite::M413() {
void GcodeSuite::M413_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_POWER_LOSS_RECOVERY));
SERIAL_ECHOPAIR(" M413 S", AS_DIGIT(recovery.enabled), " ; ");
SERIAL_ECHOPGM(" M413 S", AS_DIGIT(recovery.enabled), " ; ");
serialprintln_onoff(recovery.enabled);
}

4
Marlin/src/gcode/feature/runout/M412.cpp
View file

@ -56,7 +56,7 @@ void GcodeSuite::M412() {
SERIAL_ECHOPGM("Filament runout ");
serialprint_onoff(runout.enabled);
#if HAS_FILAMENT_RUNOUT_DISTANCE
SERIAL_ECHOPAIR(" ; Distance ", runout.runout_distance(), "mm");
SERIAL_ECHOPGM(" ; Distance ", runout.runout_distance(), "mm");
#endif
#if ENABLED(HOST_ACTION_COMMANDS)
SERIAL_ECHOPGM(" ; Host handling ");
@ -68,7 +68,7 @@ void GcodeSuite::M412() {
void GcodeSuite::M412_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_FILAMENT_RUNOUT_SENSOR));
SERIAL_ECHOLNPAIR(
SERIAL_ECHOLNPGM(
" M412 S", runout.enabled
#if HAS_FILAMENT_RUNOUT_DISTANCE
, " D", LINEAR_UNIT(runout.runout_distance())

38
Marlin/src/gcode/feature/trinamic/M906.cpp
View file

@ -209,13 +209,13 @@ void GcodeSuite::M906_report(const bool forReplay/*=true*/) {
#if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z)
say_M906(forReplay);
#if AXIS_IS_TMC(X)
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX.getMilliamps());
SERIAL_ECHOPGM_P(SP_X_STR, stepperX.getMilliamps());
#endif
#if AXIS_IS_TMC(Y)
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY.getMilliamps());
SERIAL_ECHOPGM_P(SP_Y_STR, stepperY.getMilliamps());
#endif
#if AXIS_IS_TMC(Z)
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ.getMilliamps());
SERIAL_ECHOPGM_P(SP_Z_STR, stepperZ.getMilliamps());
#endif
SERIAL_EOL();
#endif
@ -224,71 +224,71 @@ void GcodeSuite::M906_report(const bool forReplay/*=true*/) {
say_M906(forReplay);
SERIAL_ECHOPGM(" I1");
#if AXIS_IS_TMC(X2)
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX2.getMilliamps());
SERIAL_ECHOPGM_P(SP_X_STR, stepperX2.getMilliamps());
#endif
#if AXIS_IS_TMC(Y2)
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY2.getMilliamps());
SERIAL_ECHOPGM_P(SP_Y_STR, stepperY2.getMilliamps());
#endif
#if AXIS_IS_TMC(Z2)
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ2.getMilliamps());
SERIAL_ECHOPGM_P(SP_Z_STR, stepperZ2.getMilliamps());
#endif
SERIAL_EOL();
#endif
#if AXIS_IS_TMC(Z3)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" I2 Z", stepperZ3.getMilliamps());
SERIAL_ECHOLNPGM(" I2 Z", stepperZ3.getMilliamps());
#endif
#if AXIS_IS_TMC(Z4)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" I3 Z", stepperZ4.getMilliamps());
SERIAL_ECHOLNPGM(" I3 Z", stepperZ4.getMilliamps());
#endif
#if AXIS_IS_TMC(I)
say_M906(forReplay);
SERIAL_ECHOLNPAIR_P(SP_I_STR, stepperI.getMilliamps());
SERIAL_ECHOLNPGM_P(SP_I_STR, stepperI.getMilliamps());
#endif
#if AXIS_IS_TMC(J)
say_M906(forReplay);
SERIAL_ECHOLNPAIR_P(SP_J_STR, stepperJ.getMilliamps());
SERIAL_ECHOLNPGM_P(SP_J_STR, stepperJ.getMilliamps());
#endif
#if AXIS_IS_TMC(K)
say_M906(forReplay);
SERIAL_ECHOLNPAIR_P(SP_K_STR, stepperK.getMilliamps());
SERIAL_ECHOLNPGM_P(SP_K_STR, stepperK.getMilliamps());
#endif
#if AXIS_IS_TMC(E0)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T0 E", stepperE0.getMilliamps());
SERIAL_ECHOLNPGM(" T0 E", stepperE0.getMilliamps());
#endif
#if AXIS_IS_TMC(E1)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T1 E", stepperE1.getMilliamps());
SERIAL_ECHOLNPGM(" T1 E", stepperE1.getMilliamps());
#endif
#if AXIS_IS_TMC(E2)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T2 E", stepperE2.getMilliamps());
SERIAL_ECHOLNPGM(" T2 E", stepperE2.getMilliamps());
#endif
#if AXIS_IS_TMC(E3)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T3 E", stepperE3.getMilliamps());
SERIAL_ECHOLNPGM(" T3 E", stepperE3.getMilliamps());
#endif
#if AXIS_IS_TMC(E4)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T4 E", stepperE4.getMilliamps());
SERIAL_ECHOLNPGM(" T4 E", stepperE4.getMilliamps());
#endif
#if AXIS_IS_TMC(E5)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T5 E", stepperE5.getMilliamps());
SERIAL_ECHOLNPGM(" T5 E", stepperE5.getMilliamps());
#endif
#if AXIS_IS_TMC(E6)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T6 E", stepperE6.getMilliamps());
SERIAL_ECHOLNPGM(" T6 E", stepperE6.getMilliamps());
#endif
#if AXIS_IS_TMC(E7)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T7 E", stepperE7.getMilliamps());
SERIAL_ECHOLNPGM(" T7 E", stepperE7.getMilliamps());
#endif
SERIAL_EOL();
}

60
Marlin/src/gcode/feature/trinamic/M911-M914.cpp
View file

@ -321,13 +321,13 @@
#if X_HAS_STEALTHCHOP || Y_HAS_STEALTHCHOP || Z_HAS_STEALTHCHOP
say_M913(forReplay);
#if X_HAS_STEALTHCHOP
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX.get_pwm_thrs());
SERIAL_ECHOPGM_P(SP_X_STR, stepperX.get_pwm_thrs());
#endif
#if Y_HAS_STEALTHCHOP
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY.get_pwm_thrs());
SERIAL_ECHOPGM_P(SP_Y_STR, stepperY.get_pwm_thrs());
#endif
#if Z_HAS_STEALTHCHOP
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ.get_pwm_thrs());
SERIAL_ECHOPGM_P(SP_Z_STR, stepperZ.get_pwm_thrs());
#endif
SERIAL_EOL();
#endif
@ -336,71 +336,71 @@
say_M913(forReplay);
SERIAL_ECHOPGM(" I1");
#if X2_HAS_STEALTHCHOP
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX2.get_pwm_thrs());
SERIAL_ECHOPGM_P(SP_X_STR, stepperX2.get_pwm_thrs());
#endif
#if Y2_HAS_STEALTHCHOP
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY2.get_pwm_thrs());
SERIAL_ECHOPGM_P(SP_Y_STR, stepperY2.get_pwm_thrs());
#endif
#if Z2_HAS_STEALTHCHOP
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ2.get_pwm_thrs());
SERIAL_ECHOPGM_P(SP_Z_STR, stepperZ2.get_pwm_thrs());
#endif
SERIAL_EOL();
#endif
#if Z3_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" I2 Z", stepperZ3.get_pwm_thrs());
SERIAL_ECHOLNPGM(" I2 Z", stepperZ3.get_pwm_thrs());
#endif
#if Z4_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" I3 Z", stepperZ4.get_pwm_thrs());
SERIAL_ECHOLNPGM(" I3 Z", stepperZ4.get_pwm_thrs());
#endif
#if I_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR_P(SP_I_STR, stepperI.get_pwm_thrs());
SERIAL_ECHOLNPGM_P(SP_I_STR, stepperI.get_pwm_thrs());
#endif
#if J_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR_P(SP_J_STR, stepperJ.get_pwm_thrs());
SERIAL_ECHOLNPGM_P(SP_J_STR, stepperJ.get_pwm_thrs());
#endif
#if K_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR_P(SP_K_STR, stepperK.get_pwm_thrs());
SERIAL_ECHOLNPGM_P(SP_K_STR, stepperK.get_pwm_thrs());
#endif
#if E0_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T0 E", stepperE0.get_pwm_thrs());
SERIAL_ECHOLNPGM(" T0 E", stepperE0.get_pwm_thrs());
#endif
#if E1_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T1 E", stepperE1.get_pwm_thrs());
SERIAL_ECHOLNPGM(" T1 E", stepperE1.get_pwm_thrs());
#endif
#if E2_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T2 E", stepperE2.get_pwm_thrs());
SERIAL_ECHOLNPGM(" T2 E", stepperE2.get_pwm_thrs());
#endif
#if E3_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T3 E", stepperE3.get_pwm_thrs());
SERIAL_ECHOLNPGM(" T3 E", stepperE3.get_pwm_thrs());
#endif
#if E4_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T4 E", stepperE4.get_pwm_thrs());
SERIAL_ECHOLNPGM(" T4 E", stepperE4.get_pwm_thrs());
#endif
#if E5_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T5 E", stepperE5.get_pwm_thrs());
SERIAL_ECHOLNPGM(" T5 E", stepperE5.get_pwm_thrs());
#endif
#if E6_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T6 E", stepperE6.get_pwm_thrs());
SERIAL_ECHOLNPGM(" T6 E", stepperE6.get_pwm_thrs());
#endif
#if E7_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T7 E", stepperE7.get_pwm_thrs());
SERIAL_ECHOLNPGM(" T7 E", stepperE7.get_pwm_thrs());
#endif
SERIAL_EOL();
}
@ -522,13 +522,13 @@
#if X_SENSORLESS || Y_SENSORLESS || Z_SENSORLESS
say_M914(forReplay);
#if X_SENSORLESS
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX.homing_threshold());
SERIAL_ECHOPGM_P(SP_X_STR, stepperX.homing_threshold());
#endif
#if Y_SENSORLESS
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY.homing_threshold());
SERIAL_ECHOPGM_P(SP_Y_STR, stepperY.homing_threshold());
#endif
#if Z_SENSORLESS
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ.homing_threshold());
SERIAL_ECHOPGM_P(SP_Z_STR, stepperZ.homing_threshold());
#endif
SERIAL_EOL();
#endif
@ -537,38 +537,38 @@
say_M914(forReplay);
SERIAL_ECHOPGM(" I1");
#if X2_SENSORLESS
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX2.homing_threshold());
SERIAL_ECHOPGM_P(SP_X_STR, stepperX2.homing_threshold());
#endif
#if Y2_SENSORLESS
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY2.homing_threshold());
SERIAL_ECHOPGM_P(SP_Y_STR, stepperY2.homing_threshold());
#endif
#if Z2_SENSORLESS
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ2.homing_threshold());
SERIAL_ECHOPGM_P(SP_Z_STR, stepperZ2.homing_threshold());
#endif
SERIAL_EOL();
#endif
#if Z3_SENSORLESS
say_M914(forReplay);
SERIAL_ECHOLNPAIR(" I2 Z", stepperZ3.homing_threshold());
SERIAL_ECHOLNPGM(" I2 Z", stepperZ3.homing_threshold());
#endif
#if Z4_SENSORLESS
say_M914(forReplay);
SERIAL_ECHOLNPAIR(" I3 Z", stepperZ4.homing_threshold());
SERIAL_ECHOLNPGM(" I3 Z", stepperZ4.homing_threshold());
#endif
#if I_SENSORLESS
say_M914(forReplay);
SERIAL_ECHOLNPAIR_P(SP_I_STR, stepperI.homing_threshold());
SERIAL_ECHOLNPGM_P(SP_I_STR, stepperI.homing_threshold());
#endif
#if J_SENSORLESS
say_M914(forReplay);
SERIAL_ECHOLNPAIR_P(SP_J_STR, stepperJ.homing_threshold());
SERIAL_ECHOLNPGM_P(SP_J_STR, stepperJ.homing_threshold());
#endif
#if K_SENSORLESS
say_M914(forReplay);
SERIAL_ECHOLNPAIR_P(SP_K_STR, stepperK.homing_threshold());
SERIAL_ECHOLNPGM_P(SP_K_STR, stepperK.homing_threshold());
#endif
}

6
Marlin/src/gcode/gcode.cpp
View file

@ -130,7 +130,7 @@ int8_t GcodeSuite::get_target_extruder_from_command() {
if (e < EXTRUDERS) return e;
SERIAL_ECHO_START();
SERIAL_CHAR('M'); SERIAL_ECHO(parser.codenum);
SERIAL_ECHOLNPAIR(" " STR_INVALID_EXTRUDER " ", e);
SERIAL_ECHOLNPGM(" " STR_INVALID_EXTRUDER " ", e);
return -1;
}
return active_extruder;
@ -149,7 +149,7 @@ int8_t GcodeSuite::get_target_e_stepper_from_command() {
if (e == -1)
SERIAL_ECHOLNPGM(" " STR_E_STEPPER_NOT_SPECIFIED);
else
SERIAL_ECHOLNPAIR(" " STR_INVALID_E_STEPPER " ", e);
SERIAL_ECHOLNPGM(" " STR_INVALID_E_STEPPER " ", e);
return -1;
}
@ -1082,7 +1082,7 @@ void GcodeSuite::process_next_command() {
SERIAL_ECHO_START();
SERIAL_ECHOLN(command.buffer);
#if ENABLED(M100_FREE_MEMORY_DUMPER)
SERIAL_ECHOPAIR("slot:", queue.ring_buffer.index_r);
SERIAL_ECHOPGM("slot:", queue.ring_buffer.index_r);
M100_dump_routine(PSTR(" Command Queue:"), (const char*)&queue.ring_buffer, sizeof(queue.ring_buffer));
#endif
}

6
Marlin/src/gcode/gcode_d.cpp
View file

@ -179,7 +179,7 @@ void GcodeSuite::D(const int16_t dcode) {
break;
case 7: // D7 dump the current serial port type (hence configuration)
SERIAL_ECHOLNPAIR("Current serial configuration RX_BS:", RX_BUFFER_SIZE, ", TX_BS:", TX_BUFFER_SIZE);
SERIAL_ECHOLNPGM("Current serial configuration RX_BS:", RX_BUFFER_SIZE, ", TX_BS:", TX_BUFFER_SIZE);
SERIAL_ECHOLN(gtn(&SERIAL_IMPL));
break;
@ -202,7 +202,7 @@ void GcodeSuite::D(const int16_t dcode) {
case 101: { // D101 Test SD Write
card.openFileWrite("test.gco");
if (!card.isFileOpen()) {
SERIAL_ECHOLNPAIR("Failed to open test.gco to write.");
SERIAL_ECHOLNPGM("Failed to open test.gco to write.");
return;
}
__attribute__((aligned(sizeof(size_t)))) uint8_t buf[512];
@ -224,7 +224,7 @@ void GcodeSuite::D(const int16_t dcode) {
char testfile[] = "test.gco";
card.openFileRead(testfile);
if (!card.isFileOpen()) {
SERIAL_ECHOLNPAIR("Failed to open test.gco to read.");
SERIAL_ECHOLNPGM("Failed to open test.gco to read.");
return;
}
__attribute__((aligned(sizeof(size_t)))) uint8_t buf[512];

4
Marlin/src/gcode/geometry/G53-G59.cpp
View file

@ -69,7 +69,7 @@ void GcodeSuite::G53() {
process_parsed_command(); // ...process the chained command
select_coordinate_system(old_system);
#ifdef DEBUG_M53
SERIAL_ECHOLNPAIR("Go back to workspace ", old_system);
SERIAL_ECHOLNPGM("Go back to workspace ", old_system);
report_current_position();
#endif
}
@ -87,7 +87,7 @@ void GcodeSuite::G53() {
void G54_59(uint8_t subcode=0) {
const int8_t _space = parser.codenum - 54 + subcode;
if (gcode.select_coordinate_system(_space)) {
SERIAL_ECHOLNPAIR("Select workspace ", _space);
SERIAL_ECHOLNPGM("Select workspace ", _space);
report_current_position();
}
}

2
Marlin/src/gcode/geometry/M206_M428.cpp
View file

@ -54,7 +54,7 @@ void GcodeSuite::M206() {
void GcodeSuite::M206_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_HOME_OFFSET));
SERIAL_ECHOLNPAIR_P(
SERIAL_ECHOLNPGM_P(
#if IS_CARTESIAN
LIST_N(DOUBLE(LINEAR_AXES),
PSTR(" M206 X"), LINEAR_UNIT(home_offset.x),

2
Marlin/src/gcode/host/M114.cpp
View file

@ -218,7 +218,7 @@ void GcodeSuite::M114() {
}
#if HAS_EXTRUDERS
if (parser.seen_test('E')) {
SERIAL_ECHOLNPAIR("Count E:", stepper.position(E_AXIS));
SERIAL_ECHOLNPGM("Count E:", stepper.position(E_AXIS));
return;
}
#endif

2
Marlin/src/gcode/host/M115.cpp
View file

@ -175,7 +175,7 @@ void GcodeSuite::M115() {
apply_motion_limits(cmax);
const xyz_pos_t lmin = dmin.asLogical(), lmax = dmax.asLogical(),
wmin = cmin.asLogical(), wmax = cmax.asLogical();
SERIAL_ECHOLNPAIR(
SERIAL_ECHOLNPGM(
"area:{"
"full:{"
"min:{x:", lmin.x, ",y:", lmin.y, ",z:", lmin.z, "},"

2
Marlin/src/gcode/host/M360.cpp
View file

@ -36,7 +36,7 @@ static void config_prefix(PGM_P const name, PGM_P const pref=nullptr, const int8
SERIAL_ECHOPGM("Config:");
if (pref) SERIAL_ECHOPGM_P(pref);
if (ind >= 0) { SERIAL_ECHO(ind); SERIAL_CHAR(':'); }
SERIAL_ECHOPAIR_P(name, AS_CHAR(':'));
SERIAL_ECHOPGM_P(name, AS_CHAR(':'));
}
static void config_line(PGM_P const name, const float val, PGM_P const pref=nullptr, const int8_t ind=-1) {
config_prefix(name, pref, ind);

2
Marlin/src/gcode/lcd/M145.cpp
View file

@ -64,7 +64,7 @@ void GcodeSuite::M145_report(const bool forReplay/*=true*/) {
report_heading(forReplay, PSTR(STR_MATERIAL_HEATUP));
LOOP_L_N(i, PREHEAT_COUNT) {
report_echo_start(forReplay);
SERIAL_ECHOLNPAIR_P(
SERIAL_ECHOLNPGM_P(
PSTR(" M145 S"), i
#if HAS_HOTEND
, PSTR(" H"), parser.to_temp_units(ui.material_preset[i].hotend_temp)

Some files were not shown because too many files have changed in this diff Show more