Rename auto fan pins and add auto fan flags
This commit is contained in:
Scott Lahteine
parent
ada935de87
commit
b6aa894893
|
|
@ -426,20 +426,20 @@
|
||||||
#define HAS_HEATER_2 (PIN_EXISTS(HEATER_2))
|
#define HAS_HEATER_2 (PIN_EXISTS(HEATER_2))
|
||||||
#define HAS_HEATER_3 (PIN_EXISTS(HEATER_3))
|
#define HAS_HEATER_3 (PIN_EXISTS(HEATER_3))
|
||||||
#define HAS_HEATER_BED (PIN_EXISTS(HEATER_BED))
|
#define HAS_HEATER_BED (PIN_EXISTS(HEATER_BED))
|
||||||
#define HAS_AUTO_FAN_0 (PIN_EXISTS(EXTRUDER_0_AUTO_FAN))
|
#define HAS_AUTO_FAN_0 (PIN_EXISTS(E0_AUTO_FAN))
|
||||||
#define HAS_AUTO_FAN_1 (PIN_EXISTS(EXTRUDER_1_AUTO_FAN))
|
#define HAS_AUTO_FAN_1 (HOTENDS > 1 && PIN_EXISTS(E1_AUTO_FAN))
|
||||||
#define HAS_AUTO_FAN_2 (PIN_EXISTS(EXTRUDER_2_AUTO_FAN))
|
#define HAS_AUTO_FAN_2 (HOTENDS > 2 && PIN_EXISTS(E2_AUTO_FAN))
|
||||||
#define HAS_AUTO_FAN_3 (PIN_EXISTS(EXTRUDER_3_AUTO_FAN))
|
#define HAS_AUTO_FAN_3 (HOTENDS > 3 && PIN_EXISTS(E3_AUTO_FAN))
|
||||||
#define AUTO_1_IS_0 (EXTRUDER_1_AUTO_FAN_PIN == EXTRUDER_0_AUTO_FAN_PIN)
|
|
||||||
#define AUTO_2_IS_0 (EXTRUDER_2_AUTO_FAN_PIN == EXTRUDER_0_AUTO_FAN_PIN)
|
|
||||||
#define AUTO_2_IS_1 (EXTRUDER_2_AUTO_FAN_PIN == EXTRUDER_1_AUTO_FAN_PIN)
|
|
||||||
#define AUTO_3_IS_0 (EXTRUDER_3_AUTO_FAN_PIN == EXTRUDER_0_AUTO_FAN_PIN)
|
|
||||||
#define AUTO_3_IS_1 (EXTRUDER_3_AUTO_FAN_PIN == EXTRUDER_1_AUTO_FAN_PIN)
|
|
||||||
#define AUTO_3_IS_2 (EXTRUDER_3_AUTO_FAN_PIN == EXTRUDER_2_AUTO_FAN_PIN)
|
|
||||||
#define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3)
|
#define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3)
|
||||||
|
#define AUTO_1_IS_0 (E1_AUTO_FAN_PIN == E0_AUTO_FAN_PIN)
|
||||||
|
#define AUTO_2_IS_0 (E2_AUTO_FAN_PIN == E0_AUTO_FAN_PIN)
|
||||||
|
#define AUTO_2_IS_1 (E2_AUTO_FAN_PIN == E1_AUTO_FAN_PIN)
|
||||||
|
#define AUTO_3_IS_0 (E3_AUTO_FAN_PIN == E0_AUTO_FAN_PIN)
|
||||||
|
#define AUTO_3_IS_1 (E3_AUTO_FAN_PIN == E1_AUTO_FAN_PIN)
|
||||||
|
#define AUTO_3_IS_2 (E3_AUTO_FAN_PIN == E2_AUTO_FAN_PIN)
|
||||||
#define HAS_FAN0 (PIN_EXISTS(FAN))
|
#define HAS_FAN0 (PIN_EXISTS(FAN))
|
||||||
#define HAS_FAN1 (PIN_EXISTS(FAN1) && CONTROLLERFAN_PIN != FAN1_PIN && EXTRUDER_0_AUTO_FAN_PIN != FAN1_PIN && EXTRUDER_1_AUTO_FAN_PIN != FAN1_PIN && EXTRUDER_2_AUTO_FAN_PIN != FAN1_PIN && EXTRUDER_3_AUTO_FAN_PIN != FAN1_PIN)
|
#define HAS_FAN1 (PIN_EXISTS(FAN1) && CONTROLLERFAN_PIN != FAN1_PIN && E0_AUTO_FAN_PIN != FAN1_PIN && E1_AUTO_FAN_PIN != FAN1_PIN && E2_AUTO_FAN_PIN != FAN1_PIN && E3_AUTO_FAN_PIN != FAN1_PIN)
|
||||||
#define HAS_FAN2 (PIN_EXISTS(FAN2) && CONTROLLERFAN_PIN != FAN2_PIN && EXTRUDER_0_AUTO_FAN_PIN != FAN2_PIN && EXTRUDER_1_AUTO_FAN_PIN != FAN2_PIN && EXTRUDER_2_AUTO_FAN_PIN != FAN2_PIN && EXTRUDER_3_AUTO_FAN_PIN != FAN2_PIN)
|
#define HAS_FAN2 (PIN_EXISTS(FAN2) && CONTROLLERFAN_PIN != FAN2_PIN && E0_AUTO_FAN_PIN != FAN2_PIN && E1_AUTO_FAN_PIN != FAN2_PIN && E2_AUTO_FAN_PIN != FAN2_PIN && E3_AUTO_FAN_PIN != FAN2_PIN)
|
||||||
#define HAS_CONTROLLERFAN (PIN_EXISTS(CONTROLLERFAN))
|
#define HAS_CONTROLLERFAN (PIN_EXISTS(CONTROLLERFAN))
|
||||||
#define HAS_SERVOS (defined(NUM_SERVOS) && NUM_SERVOS > 0)
|
#define HAS_SERVOS (defined(NUM_SERVOS) && NUM_SERVOS > 0)
|
||||||
#define HAS_SERVO_0 (PIN_EXISTS(SERVO0))
|
#define HAS_SERVO_0 (PIN_EXISTS(SERVO0))
|
||||||
|
|
|
||||||
|
|
@ -205,15 +205,22 @@
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
// Extruder cooling fans
|
/**
|
||||||
// Configure fan pin outputs to automatically turn on/off when the associated
|
* Extruder cooling fans
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
*
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
* Extruder auto fans automatically turn on when their extruders'
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
* temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
*
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
* Your board's pins file specifies the recommended pins. Override those here
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
* or set to -1 to disable completely.
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
*
|
||||||
|
* Multiple extruders can be assigned to the same pin in which case
|
||||||
|
* the fan will turn on when any selected extruder is above the threshold.
|
||||||
|
*/
|
||||||
|
#define E0_AUTO_FAN_PIN -1
|
||||||
|
#define E1_AUTO_FAN_PIN -1
|
||||||
|
#define E2_AUTO_FAN_PIN -1
|
||||||
|
#define E3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -678,14 +678,14 @@
|
||||||
*/
|
*/
|
||||||
#if HAS_AUTO_FAN
|
#if HAS_AUTO_FAN
|
||||||
#if HAS_FAN0
|
#if HAS_FAN0
|
||||||
#if EXTRUDER_0_AUTO_FAN_PIN == FAN_PIN
|
#if E0_AUTO_FAN_PIN == FAN_PIN
|
||||||
#error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to FAN_PIN."
|
#error "You cannot set E0_AUTO_FAN_PIN equal to FAN_PIN."
|
||||||
#elif EXTRUDER_1_AUTO_FAN_PIN == FAN_PIN
|
#elif E1_AUTO_FAN_PIN == FAN_PIN
|
||||||
#error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to FAN_PIN."
|
#error "You cannot set E1_AUTO_FAN_PIN equal to FAN_PIN."
|
||||||
#elif EXTRUDER_2_AUTO_FAN_PIN == FAN_PIN
|
#elif E2_AUTO_FAN_PIN == FAN_PIN
|
||||||
#error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to FAN_PIN."
|
#error "You cannot set E2_AUTO_FAN_PIN equal to FAN_PIN."
|
||||||
#elif EXTRUDER_3_AUTO_FAN_PIN == FAN_PIN
|
#elif E3_AUTO_FAN_PIN == FAN_PIN
|
||||||
#error "You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to FAN_PIN."
|
#error "You cannot set E3_AUTO_FAN_PIN equal to FAN_PIN."
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
@ -695,14 +695,14 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if HAS_CONTROLLERFAN
|
#if HAS_CONTROLLERFAN
|
||||||
#if EXTRUDER_0_AUTO_FAN_PIN == CONTROLLERFAN_PIN
|
#if E0_AUTO_FAN_PIN == CONTROLLERFAN_PIN
|
||||||
#error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
|
#error "You cannot set E0_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
|
||||||
#elif EXTRUDER_1_AUTO_FAN_PIN == CONTROLLERFAN_PIN
|
#elif E1_AUTO_FAN_PIN == CONTROLLERFAN_PIN
|
||||||
#error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
|
#error "You cannot set E1_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
|
||||||
#elif EXTRUDER_2_AUTO_FAN_PIN == CONTROLLERFAN_PIN
|
#elif E2_AUTO_FAN_PIN == CONTROLLERFAN_PIN
|
||||||
#error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
|
#error "You cannot set E2_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
|
||||||
#elif EXTRUDER_3_AUTO_FAN_PIN == CONTROLLERFAN_PIN
|
#elif E3_AUTO_FAN_PIN == CONTROLLERFAN_PIN
|
||||||
#error "You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
|
#error "You cannot set E3_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -205,15 +205,22 @@
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
// Extruder cooling fans
|
/**
|
||||||
// Configure fan pin outputs to automatically turn on/off when the associated
|
* Extruder cooling fans
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
*
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
* Extruder auto fans automatically turn on when their extruders'
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
* temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN 7
|
*
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN 7
|
* Your board's pins file specifies the recommended pins. Override those here
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
* or set to -1 to disable completely.
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
*
|
||||||
|
* Multiple extruders can be assigned to the same pin in which case
|
||||||
|
* the fan will turn on when any selected extruder is above the threshold.
|
||||||
|
*/
|
||||||
|
//#define E0_AUTO_FAN_PIN -1
|
||||||
|
//#define E1_AUTO_FAN_PIN -1
|
||||||
|
#define E2_AUTO_FAN_PIN -1
|
||||||
|
#define E3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 35
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 35
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -205,15 +205,22 @@
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
// Extruder cooling fans
|
/**
|
||||||
// Configure fan pin outputs to automatically turn on/off when the associated
|
* Extruder cooling fans
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
*
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
* Extruder auto fans automatically turn on when their extruders'
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
* temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
*
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
* Your board's pins file specifies the recommended pins. Override those here
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
* or set to -1 to disable completely.
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
*
|
||||||
|
* Multiple extruders can be assigned to the same pin in which case
|
||||||
|
* the fan will turn on when any selected extruder is above the threshold.
|
||||||
|
*/
|
||||||
|
#define E0_AUTO_FAN_PIN -1
|
||||||
|
#define E1_AUTO_FAN_PIN -1
|
||||||
|
#define E2_AUTO_FAN_PIN -1
|
||||||
|
#define E3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -205,15 +205,22 @@
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
// Extruder cooling fans
|
/**
|
||||||
// Configure fan pin outputs to automatically turn on/off when the associated
|
* Extruder cooling fans
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
*
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
* Extruder auto fans automatically turn on when their extruders'
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
* temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
*
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
* Your board's pins file specifies the recommended pins. Override those here
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
* or set to -1 to disable completely.
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
*
|
||||||
|
* Multiple extruders can be assigned to the same pin in which case
|
||||||
|
* the fan will turn on when any selected extruder is above the threshold.
|
||||||
|
*/
|
||||||
|
#define E0_AUTO_FAN_PIN -1
|
||||||
|
#define E1_AUTO_FAN_PIN -1
|
||||||
|
#define E2_AUTO_FAN_PIN -1
|
||||||
|
#define E3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -205,15 +205,22 @@
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
// Extruder cooling fans
|
/**
|
||||||
// Configure fan pin outputs to automatically turn on/off when the associated
|
* Extruder cooling fans
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
*
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
* Extruder auto fans automatically turn on when their extruders'
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
* temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN 11
|
*
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN 6
|
* Your board's pins file specifies the recommended pins. Override those here
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
* or set to -1 to disable completely.
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
*
|
||||||
|
* Multiple extruders can be assigned to the same pin in which case
|
||||||
|
* the fan will turn on when any selected extruder is above the threshold.
|
||||||
|
*/
|
||||||
|
//#define E0_AUTO_FAN_PIN -1
|
||||||
|
//#define E1_AUTO_FAN_PIN -1
|
||||||
|
#define E2_AUTO_FAN_PIN -1
|
||||||
|
#define E3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -211,15 +211,22 @@
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
// Extruder cooling fans
|
/**
|
||||||
// Configure fan pin outputs to automatically turn on/off when the associated
|
* Extruder cooling fans
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
*
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
* Extruder auto fans automatically turn on when their extruders'
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
* temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
*
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
* Your board's pins file specifies the recommended pins. Override those here
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
* or set to -1 to disable completely.
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
*
|
||||||
|
* Multiple extruders can be assigned to the same pin in which case
|
||||||
|
* the fan will turn on when any selected extruder is above the threshold.
|
||||||
|
*/
|
||||||
|
#define E0_AUTO_FAN_PIN -1
|
||||||
|
#define E1_AUTO_FAN_PIN -1
|
||||||
|
#define E2_AUTO_FAN_PIN -1
|
||||||
|
#define E3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -205,15 +205,22 @@
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
// Extruder cooling fans
|
/**
|
||||||
// Configure fan pin outputs to automatically turn on/off when the associated
|
* Extruder cooling fans
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
*
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
* Extruder auto fans automatically turn on when their extruders'
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
* temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
*
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
* Your board's pins file specifies the recommended pins. Override those here
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
* or set to -1 to disable completely.
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
*
|
||||||
|
* Multiple extruders can be assigned to the same pin in which case
|
||||||
|
* the fan will turn on when any selected extruder is above the threshold.
|
||||||
|
*/
|
||||||
|
#define E0_AUTO_FAN_PIN -1
|
||||||
|
#define E1_AUTO_FAN_PIN -1
|
||||||
|
#define E2_AUTO_FAN_PIN -1
|
||||||
|
#define E3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -205,15 +205,22 @@
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
// Extruder cooling fans
|
/**
|
||||||
// Configure fan pin outputs to automatically turn on/off when the associated
|
* Extruder cooling fans
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
*
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
* Extruder auto fans automatically turn on when their extruders'
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
* temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
*
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
* Your board's pins file specifies the recommended pins. Override those here
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
* or set to -1 to disable completely.
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
*
|
||||||
|
* Multiple extruders can be assigned to the same pin in which case
|
||||||
|
* the fan will turn on when any selected extruder is above the threshold.
|
||||||
|
*/
|
||||||
|
#define E0_AUTO_FAN_PIN -1
|
||||||
|
#define E1_AUTO_FAN_PIN -1
|
||||||
|
#define E2_AUTO_FAN_PIN -1
|
||||||
|
#define E3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -205,15 +205,22 @@
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
// Extruder cooling fans
|
/**
|
||||||
// Configure fan pin outputs to automatically turn on/off when the associated
|
* Extruder cooling fans
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
*
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
* Extruder auto fans automatically turn on when their extruders'
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
* temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
*
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
* Your board's pins file specifies the recommended pins. Override those here
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
* or set to -1 to disable completely.
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
*
|
||||||
|
* Multiple extruders can be assigned to the same pin in which case
|
||||||
|
* the fan will turn on when any selected extruder is above the threshold.
|
||||||
|
*/
|
||||||
|
#define E0_AUTO_FAN_PIN -1
|
||||||
|
#define E1_AUTO_FAN_PIN -1
|
||||||
|
#define E2_AUTO_FAN_PIN -1
|
||||||
|
#define E3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -213,15 +213,22 @@
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
// Extruder cooling fans
|
/**
|
||||||
// Configure fan pin outputs to automatically turn on/off when the associated
|
* Extruder cooling fans
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
*
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
* Extruder auto fans automatically turn on when their extruders'
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
* temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
*
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
* Your board's pins file specifies the recommended pins. Override those here
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
* or set to -1 to disable completely.
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
*
|
||||||
|
* Multiple extruders can be assigned to the same pin in which case
|
||||||
|
* the fan will turn on when any selected extruder is above the threshold.
|
||||||
|
*/
|
||||||
|
#define E0_AUTO_FAN_PIN -1
|
||||||
|
#define E1_AUTO_FAN_PIN -1
|
||||||
|
#define E2_AUTO_FAN_PIN -1
|
||||||
|
#define E3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -205,15 +205,22 @@
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
// Extruder cooling fans
|
/**
|
||||||
// Configure fan pin outputs to automatically turn on/off when the associated
|
* Extruder cooling fans
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
*
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
* Extruder auto fans automatically turn on when their extruders'
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
* temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
*
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
* Your board's pins file specifies the recommended pins. Override those here
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
* or set to -1 to disable completely.
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
*
|
||||||
|
* Multiple extruders can be assigned to the same pin in which case
|
||||||
|
* the fan will turn on when any selected extruder is above the threshold.
|
||||||
|
*/
|
||||||
|
#define E0_AUTO_FAN_PIN -1
|
||||||
|
#define E1_AUTO_FAN_PIN -1
|
||||||
|
#define E2_AUTO_FAN_PIN -1
|
||||||
|
#define E3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -205,15 +205,22 @@
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
// Extruder cooling fans
|
/**
|
||||||
// Configure fan pin outputs to automatically turn on/off when the associated
|
* Extruder cooling fans
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
*
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
* Extruder auto fans automatically turn on when their extruders'
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
* temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
*
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
* Your board's pins file specifies the recommended pins.
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
* Override those here. Set to -1 to disable unused fans.
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
*
|
||||||
|
* Multiple extruders can be assigned to the same pin in which case
|
||||||
|
* the fan will turn on when any selected extruder is above the threshold.
|
||||||
|
*/
|
||||||
|
#define E0_AUTO_FAN_PIN -1
|
||||||
|
#define E1_AUTO_FAN_PIN -1
|
||||||
|
#define E2_AUTO_FAN_PIN -1
|
||||||
|
#define E3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -205,15 +205,22 @@
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
// Extruder cooling fans
|
/**
|
||||||
// Configure fan pin outputs to automatically turn on/off when the associated
|
* Extruder cooling fans
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
*
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
* Extruder auto fans automatically turn on when their extruders'
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
* temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
*
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
* Your board's pins file specifies the recommended pins. Override those here
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
* or set to -1 to disable completely.
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
*
|
||||||
|
* Multiple extruders can be assigned to the same pin in which case
|
||||||
|
* the fan will turn on when any selected extruder is above the threshold.
|
||||||
|
*/
|
||||||
|
#define E0_AUTO_FAN_PIN -1
|
||||||
|
#define E1_AUTO_FAN_PIN -1
|
||||||
|
#define E2_AUTO_FAN_PIN -1
|
||||||
|
#define E3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -205,15 +205,22 @@
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
// Extruder cooling fans
|
/**
|
||||||
// Configure fan pin outputs to automatically turn on/off when the associated
|
* Extruder cooling fans
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
*
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
* Extruder auto fans automatically turn on when their extruders'
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
* temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
*
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
* Your board's pins file specifies the recommended pins. Override those here
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
* or set to -1 to disable completely.
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
*
|
||||||
|
* Multiple extruders can be assigned to the same pin in which case
|
||||||
|
* the fan will turn on when any selected extruder is above the threshold.
|
||||||
|
*/
|
||||||
|
#define E0_AUTO_FAN_PIN -1
|
||||||
|
#define E1_AUTO_FAN_PIN -1
|
||||||
|
#define E2_AUTO_FAN_PIN -1
|
||||||
|
#define E3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -210,15 +210,22 @@
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
// Extruder cooling fans
|
/**
|
||||||
// Configure fan pin outputs to automatically turn on/off when the associated
|
* Extruder cooling fans
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
*
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
* Extruder auto fans automatically turn on when their extruders'
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
* temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
*
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
* Your board's pins file specifies the recommended pins. Override those here
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
* or set to -1 to disable completely.
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
*
|
||||||
|
* Multiple extruders can be assigned to the same pin in which case
|
||||||
|
* the fan will turn on when any selected extruder is above the threshold.
|
||||||
|
*/
|
||||||
|
#define E0_AUTO_FAN_PIN -1
|
||||||
|
#define E1_AUTO_FAN_PIN -1
|
||||||
|
#define E2_AUTO_FAN_PIN -1
|
||||||
|
#define E3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -205,15 +205,22 @@
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
// Extruder cooling fans
|
/**
|
||||||
// Configure fan pin outputs to automatically turn on/off when the associated
|
* Extruder cooling fans
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
*
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
* Extruder auto fans automatically turn on when their extruders'
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
* temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
*
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
* Your board's pins file specifies the recommended pins. Override those here
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
* or set to -1 to disable completely.
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
*
|
||||||
|
* Multiple extruders can be assigned to the same pin in which case
|
||||||
|
* the fan will turn on when any selected extruder is above the threshold.
|
||||||
|
*/
|
||||||
|
#define E0_AUTO_FAN_PIN -1
|
||||||
|
#define E1_AUTO_FAN_PIN -1
|
||||||
|
#define E2_AUTO_FAN_PIN -1
|
||||||
|
#define E3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -205,15 +205,22 @@
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
// Extruder cooling fans
|
/**
|
||||||
// Configure fan pin outputs to automatically turn on/off when the associated
|
* Extruder cooling fans
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
*
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
* Extruder auto fans automatically turn on when their extruders'
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
* temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
*
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
* Your board's pins file specifies the recommended pins. Override those here
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
* or set to -1 to disable completely.
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
*
|
||||||
|
* Multiple extruders can be assigned to the same pin in which case
|
||||||
|
* the fan will turn on when any selected extruder is above the threshold.
|
||||||
|
*/
|
||||||
|
#define E0_AUTO_FAN_PIN -1
|
||||||
|
#define E1_AUTO_FAN_PIN -1
|
||||||
|
#define E2_AUTO_FAN_PIN -1
|
||||||
|
#define E3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -205,15 +205,22 @@
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
// Extruder cooling fans
|
/**
|
||||||
// Configure fan pin outputs to automatically turn on/off when the associated
|
* Extruder cooling fans
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
*
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
* Extruder auto fans automatically turn on when their extruders'
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
* temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
*
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
* Your board's pins file specifies the recommended pins. Override those here
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
* or set to -1 to disable completely.
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
*
|
||||||
|
* Multiple extruders can be assigned to the same pin in which case
|
||||||
|
* the fan will turn on when any selected extruder is above the threshold.
|
||||||
|
*/
|
||||||
|
#define E0_AUTO_FAN_PIN -1
|
||||||
|
#define E1_AUTO_FAN_PIN -1
|
||||||
|
#define E2_AUTO_FAN_PIN -1
|
||||||
|
#define E3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -306,7 +306,7 @@
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define _H0_PINS HEATER_0_PIN, EXTRUDER_0_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_0_PIN),
|
#define _H0_PINS HEATER_0_PIN, E0_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_0_PIN),
|
||||||
#define _H1_PINS
|
#define _H1_PINS
|
||||||
#define _H2_PINS
|
#define _H2_PINS
|
||||||
#define _H3_PINS
|
#define _H3_PINS
|
||||||
|
|
@ -314,13 +314,13 @@
|
||||||
|
|
||||||
#if HOTENDS > 1
|
#if HOTENDS > 1
|
||||||
#undef _H1_PINS
|
#undef _H1_PINS
|
||||||
#define _H1_PINS HEATER_1_PIN, EXTRUDER_1_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_1_PIN),
|
#define _H1_PINS HEATER_1_PIN, E1_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_1_PIN),
|
||||||
#if HOTENDS > 2
|
#if HOTENDS > 2
|
||||||
#undef _H2_PINS
|
#undef _H2_PINS
|
||||||
#define _H2_PINS HEATER_2_PIN, EXTRUDER_2_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_2_PIN),
|
#define _H2_PINS HEATER_2_PIN, E2_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_2_PIN),
|
||||||
#if HOTENDS > 3
|
#if HOTENDS > 3
|
||||||
#undef _H3_PINS
|
#undef _H3_PINS
|
||||||
#define _H3_PINS HEATER_3_PIN, EXTRUDER_3_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_3_PIN),
|
#define _H3_PINS HEATER_3_PIN, E3_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_3_PIN),
|
||||||
#if HOTENDS > 4
|
#if HOTENDS > 4
|
||||||
#undef _H4_PINS
|
#undef _H4_PINS
|
||||||
#define _H4_PINS HEATER_4_PIN, marlinAnalogInputToDigitalPin(TEMP_4_PIN),
|
#define _H4_PINS HEATER_4_PIN, marlinAnalogInputToDigitalPin(TEMP_4_PIN),
|
||||||
|
|
|
||||||
|
|
@ -234,17 +234,17 @@ static bool report_pin_name(int8_t pin) {
|
||||||
#if PIN_EXISTS(CONTROLLERFAN)
|
#if PIN_EXISTS(CONTROLLERFAN)
|
||||||
PIN_SAY(CONTROLLERFAN_PIN);
|
PIN_SAY(CONTROLLERFAN_PIN);
|
||||||
#endif
|
#endif
|
||||||
#if PIN_EXISTS(EXTRUDER_0_AUTO_FAN)
|
#if PIN_EXISTS(E0_AUTO_FAN)
|
||||||
PIN_SAY(EXTRUDER_0_AUTO_FAN_PIN);
|
PIN_SAY(E0_AUTO_FAN_PIN);
|
||||||
#endif
|
#endif
|
||||||
#if PIN_EXISTS(EXTRUDER_1_AUTO_FAN)
|
#if PIN_EXISTS(E1_AUTO_FAN)
|
||||||
PIN_SAY(EXTRUDER_1_AUTO_FAN_PIN);
|
PIN_SAY(E1_AUTO_FAN_PIN);
|
||||||
#endif
|
#endif
|
||||||
#if PIN_EXISTS(EXTRUDER_2_AUTO_FAN)
|
#if PIN_EXISTS(E2_AUTO_FAN)
|
||||||
PIN_SAY(EXTRUDER_2_AUTO_FAN_PIN);
|
PIN_SAY(E2_AUTO_FAN_PIN);
|
||||||
#endif
|
#endif
|
||||||
#if PIN_EXISTS(EXTRUDER_3_AUTO_FAN)
|
#if PIN_EXISTS(E3_AUTO_FAN)
|
||||||
PIN_SAY(EXTRUDER_3_AUTO_FAN_PIN);
|
PIN_SAY(E3_AUTO_FAN_PIN);
|
||||||
#endif
|
#endif
|
||||||
#if PIN_EXISTS(HEATER_0)
|
#if PIN_EXISTS(HEATER_0)
|
||||||
PIN_SAY(HEATER_0_PIN);
|
PIN_SAY(HEATER_0_PIN);
|
||||||
|
|
|
||||||
|
|
@ -106,10 +106,10 @@
|
||||||
#define CONTROLLERFAN_PIN 4 // Pin used for the fan to cool motherboard (-1 to disable)
|
#define CONTROLLERFAN_PIN 4 // Pin used for the fan to cool motherboard (-1 to disable)
|
||||||
|
|
||||||
// Fans/Water Pump to cool the hotend cool side.
|
// Fans/Water Pump to cool the hotend cool side.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN 5
|
#define E0_AUTO_FAN_PIN 5
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN 5
|
#define E1_AUTO_FAN_PIN 5
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN 5
|
#define E2_AUTO_FAN_PIN 5
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN 5
|
#define E3_AUTO_FAN_PIN 5
|
||||||
|
|
||||||
//
|
//
|
||||||
// LCD / Controller
|
// LCD / Controller
|
||||||
|
|
|
||||||
|
|
@ -454,7 +454,7 @@ int Temperature::getHeaterPower(int heater) {
|
||||||
#if HAS_AUTO_FAN
|
#if HAS_AUTO_FAN
|
||||||
|
|
||||||
void Temperature::checkExtruderAutoFans() {
|
void Temperature::checkExtruderAutoFans() {
|
||||||
const int8_t fanPin[] = { EXTRUDER_0_AUTO_FAN_PIN, EXTRUDER_1_AUTO_FAN_PIN, EXTRUDER_2_AUTO_FAN_PIN, EXTRUDER_3_AUTO_FAN_PIN };
|
const int8_t fanPin[] = { E0_AUTO_FAN_PIN, E1_AUTO_FAN_PIN, E2_AUTO_FAN_PIN, E3_AUTO_FAN_PIN };
|
||||||
const int fanBit[] = {
|
const int fanBit[] = {
|
||||||
0,
|
0,
|
||||||
AUTO_1_IS_0 ? 0 : 1,
|
AUTO_1_IS_0 ? 0 : 1,
|
||||||
|
|
@ -1043,43 +1043,43 @@ void Temperature::init() {
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if HAS_AUTO_FAN_0
|
#if HAS_AUTO_FAN_0
|
||||||
#if EXTRUDER_0_AUTO_FAN_PIN == FAN1_PIN
|
#if E0_AUTO_FAN_PIN == FAN1_PIN
|
||||||
SET_OUTPUT(EXTRUDER_0_AUTO_FAN_PIN);
|
SET_OUTPUT(E0_AUTO_FAN_PIN);
|
||||||
#if ENABLED(FAST_PWM_FAN)
|
#if ENABLED(FAST_PWM_FAN)
|
||||||
setPwmFrequency(EXTRUDER_0_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
setPwmFrequency(E0_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
||||||
#endif
|
#endif
|
||||||
#else
|
#else
|
||||||
pinMode(EXTRUDER_0_AUTO_FAN_PIN, OUTPUT);
|
pinMode(E0_AUTO_FAN_PIN, OUTPUT);
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#if HAS_AUTO_FAN_1 && !AUTO_1_IS_0
|
#if HAS_AUTO_FAN_1 && !AUTO_1_IS_0
|
||||||
#if EXTRUDER_1_AUTO_FAN_PIN == FAN1_PIN
|
#if E1_AUTO_FAN_PIN == FAN1_PIN
|
||||||
SET_OUTPUT(EXTRUDER_1_AUTO_FAN_PIN);
|
SET_OUTPUT(E1_AUTO_FAN_PIN);
|
||||||
#if ENABLED(FAST_PWM_FAN)
|
#if ENABLED(FAST_PWM_FAN)
|
||||||
setPwmFrequency(EXTRUDER_1_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
setPwmFrequency(E1_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
||||||
#endif
|
#endif
|
||||||
#else
|
#else
|
||||||
pinMode(EXTRUDER_1_AUTO_FAN_PIN, OUTPUT);
|
pinMode(E1_AUTO_FAN_PIN, OUTPUT);
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#if HAS_AUTO_FAN_2 && !AUTO_2_IS_0 && !AUTO_2_IS_1
|
#if HAS_AUTO_FAN_2 && !AUTO_2_IS_0 && !AUTO_2_IS_1
|
||||||
#if EXTRUDER_2_AUTO_FAN_PIN == FAN1_PIN
|
#if E2_AUTO_FAN_PIN == FAN1_PIN
|
||||||
SET_OUTPUT(EXTRUDER_2_AUTO_FAN_PIN);
|
SET_OUTPUT(E2_AUTO_FAN_PIN);
|
||||||
#if ENABLED(FAST_PWM_FAN)
|
#if ENABLED(FAST_PWM_FAN)
|
||||||
setPwmFrequency(EXTRUDER_2_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
setPwmFrequency(E2_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
||||||
#endif
|
#endif
|
||||||
#else
|
#else
|
||||||
pinMode(EXTRUDER_2_AUTO_FAN_PIN, OUTPUT);
|
pinMode(E2_AUTO_FAN_PIN, OUTPUT);
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#if HAS_AUTO_FAN_3 && !AUTO_3_IS_0 && !AUTO_3_IS_1 && !AUTO_3_IS_2
|
#if HAS_AUTO_FAN_3 && !AUTO_3_IS_0 && !AUTO_3_IS_1 && !AUTO_3_IS_2
|
||||||
#if EXTRUDER_3_AUTO_FAN_PIN == FAN1_PIN
|
#if E3_AUTO_FAN_PIN == FAN1_PIN
|
||||||
SET_OUTPUT(EXTRUDER_3_AUTO_FAN_PIN);
|
SET_OUTPUT(E3_AUTO_FAN_PIN);
|
||||||
#if ENABLED(FAST_PWM_FAN)
|
#if ENABLED(FAST_PWM_FAN)
|
||||||
setPwmFrequency(EXTRUDER_3_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
setPwmFrequency(E3_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
||||||
#endif
|
#endif
|
||||||
#else
|
#else
|
||||||
pinMode(EXTRUDER_3_AUTO_FAN_PIN, OUTPUT);
|
pinMode(E3_AUTO_FAN_PIN, OUTPUT);
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
|
|
||||||
Loading…
Reference in a new issue