Cooler (for Laser) - M143, M193 (#21255)
This commit is contained in:
Mike La Spina
GitHub
parent
87bef13a4c
commit
b95e548ddb
|
|
@ -329,8 +329,10 @@
|
|||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define AUTO_POWER_COOLER_FAN
|
||||
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
|
||||
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
|
||||
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
|
||||
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
|
||||
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
|
||||
#endif
|
||||
|
|
@ -418,6 +420,7 @@
|
|||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
@ -636,6 +639,7 @@
|
|||
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
|
||||
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
|
||||
|
||||
//===========================================================================
|
||||
//============================= Mechanical Settings =========================
|
||||
|
|
|
|||
|
|
@ -113,6 +113,12 @@
|
|||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define COOLER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
|
|
@ -179,6 +185,25 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler options
|
||||
//
|
||||
#if TEMP_SENSOR_COOLER
|
||||
#define COOLER_MINTEMP 8 // (°C)
|
||||
#define COOLER_MAXTEMP 26 // (°C)
|
||||
#define COOLER_DEFAULT_TEMP 16 // (°C)
|
||||
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
|
||||
#define COOLER_INVERTING false
|
||||
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
|
||||
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
|
||||
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
|
||||
#if ENABLED(COOLER_FAN)
|
||||
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
|
||||
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection provides additional protection to your printer from damage
|
||||
* and fire. Marlin always includes safe min and max temperature ranges which
|
||||
|
|
@ -248,6 +273,20 @@
|
|||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the laser cooler.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
|
||||
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Laser cooling watch settings (M143/M193).
|
||||
*/
|
||||
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
|
|
@ -493,11 +532,15 @@
|
|||
#define E6_AUTO_FAN_PIN -1
|
||||
#define E7_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define COOLER_AUTO_FAN_PIN -1
|
||||
#define COOLER_FAN_PIN -1
|
||||
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
|
||||
#define CHAMBER_AUTO_FAN_SPEED 255
|
||||
#define COOLER_AUTO_FAN_TEMPERATURE 18
|
||||
#define COOLER_AUTO_FAN_SPEED 255
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
|
|
@ -1495,6 +1538,7 @@
|
|||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
|
||||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
|
|
|||
|
|
@ -285,7 +285,7 @@ enum ClockSource2 : char {
|
|||
*/
|
||||
|
||||
// Determine which harware PWMs are already in use
|
||||
#define _PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == E6_AUTO_FAN_PIN || P == E7_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN)
|
||||
#define _PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == E6_AUTO_FAN_PIN || P == E7_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN || P == COOLER_AUTO_FAN_PIN)
|
||||
#if PIN_EXISTS(CONTROLLER_FAN)
|
||||
#define PWM_CHK_FAN_B(P) (_PWM_CHK_FAN_B(P) || P == CONTROLLER_FAN_PIN)
|
||||
#else
|
||||
|
|
|
|||
|
|
@ -185,6 +185,7 @@ void HAL_adc_init() {
|
|||
TERN_(HAS_TEMP_ADC_7, adc3_set_attenuation(get_channel(TEMP_7_PIN), ADC_ATTEN_11db));
|
||||
TERN_(HAS_HEATED_BED, adc1_set_attenuation(get_channel(TEMP_BED_PIN), ADC_ATTEN_11db));
|
||||
TERN_(HAS_TEMP_CHAMBER, adc1_set_attenuation(get_channel(TEMP_CHAMBER_PIN), ADC_ATTEN_11db));
|
||||
TERN_(HAS_TEMP_COOLER, adc1_set_attenuation(get_channel(TEMP_COOLER_PIN), ADC_ATTEN_11db));
|
||||
TERN_(FILAMENT_WIDTH_SENSOR, adc1_set_attenuation(get_channel(FILWIDTH_PIN), ADC_ATTEN_11db));
|
||||
|
||||
// Note that adc2 is shared with the WiFi module, which has higher priority, so the conversion may fail.
|
||||
|
|
|
|||
|
|
@ -57,6 +57,7 @@
|
|||
#define GET_PROBE_ADC() TERN(HAS_TEMP_PROBE, PIN_TO_ADC(TEMP_PROBE_PIN), -1)
|
||||
#define GET_BED_ADC() TERN(HAS_TEMP_ADC_BED, PIN_TO_ADC(TEMP_BED_PIN), -1)
|
||||
#define GET_CHAMBER_ADC() TERN(HAS_TEMP_ADC_CHAMBER, PIN_TO_ADC(TEMP_CHAMBER_PIN), -1)
|
||||
#define GET_COOLER_ADC() TERN(HAS_TEMP_ADC_COOLER, PIN_TO_ADC(TEMP_COOLER_PIN), -1)
|
||||
#define GET_FILAMENT_WIDTH_ADC() TERN(FILAMENT_WIDTH_SENSOR, PIN_TO_ADC(FILWIDTH_PIN), -1)
|
||||
#define GET_BUTTONS_ADC() TERN(HAS_ADC_BUTTONS, PIN_TO_ADC(ADC_KEYPAD_PIN), -1)
|
||||
|
||||
|
|
@ -66,6 +67,7 @@
|
|||
|| GET_PROBE_ADC() == n \
|
||||
|| GET_BED_ADC() == n \
|
||||
|| GET_CHAMBER_ADC() == n \
|
||||
|| GET_COOLER_ADC() == n \
|
||||
|| GET_FILAMENT_WIDTH_ADC() == n \
|
||||
|| GET_BUTTONS_ADC() == n \
|
||||
)
|
||||
|
|
@ -144,6 +146,9 @@ uint16_t HAL_adc_result;
|
|||
#if GET_CHAMBER_ADC() == 0
|
||||
TEMP_CHAMBER_PIN,
|
||||
#endif
|
||||
#if GET_COOLER_ADC() == 0
|
||||
TEMP_COOLER_PIN,
|
||||
#endif
|
||||
#if GET_FILAMENT_WIDTH_ADC() == 0
|
||||
FILWIDTH_PIN,
|
||||
#endif
|
||||
|
|
@ -184,6 +189,9 @@ uint16_t HAL_adc_result;
|
|||
#if GET_CHAMBER_ADC() == 1
|
||||
TEMP_CHAMBER_PIN,
|
||||
#endif
|
||||
#if GET_COOLER_ADC() == 1
|
||||
TEMP_COOLER_PIN,
|
||||
#endif
|
||||
#if GET_FILAMENT_WIDTH_ADC() == 1
|
||||
FILWIDTH_PIN,
|
||||
#endif
|
||||
|
|
@ -232,6 +240,9 @@ uint16_t HAL_adc_result;
|
|||
#if GET_CHAMBER_ADC() == 0
|
||||
{ PIN_TO_INPUTCTRL(TEMP_CHAMBER_PIN) },
|
||||
#endif
|
||||
#if GET_COOLER_ADC() == 0
|
||||
{ PIN_TO_INPUTCTRL(TEMP_COOLER_PIN) },
|
||||
#endif
|
||||
#if GET_FILAMENT_WIDTH_ADC() == 0
|
||||
{ PIN_TO_INPUTCTRL(FILWIDTH_PIN) },
|
||||
#endif
|
||||
|
|
@ -281,6 +292,9 @@ uint16_t HAL_adc_result;
|
|||
#if GET_CHAMBER_ADC() == 1
|
||||
{ PIN_TO_INPUTCTRL(TEMP_CHAMBER_PIN) },
|
||||
#endif
|
||||
#if GET_COOLER_ADC() == 1
|
||||
{ PIN_TO_INPUTCTRL(TEMP_COOLER_PIN) },
|
||||
#endif
|
||||
#if GET_FILAMENT_WIDTH_ADC() == 1
|
||||
{ PIN_TO_INPUTCTRL(FILWIDTH_PIN) },
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -132,6 +132,9 @@ const uint8_t adc_pins[] = {
|
|||
#if HAS_TEMP_CHAMBER
|
||||
TEMP_CHAMBER_PIN,
|
||||
#endif
|
||||
#if HAS_TEMP_COOLER
|
||||
TEMP_COOLER_PIN,
|
||||
#endif
|
||||
#if HAS_TEMP_ADC_1
|
||||
TEMP_1_PIN,
|
||||
#endif
|
||||
|
|
@ -189,6 +192,9 @@ enum TempPinIndex : char {
|
|||
#if HAS_TEMP_CHAMBER
|
||||
TEMP_CHAMBER,
|
||||
#endif
|
||||
#if HAS_TEMP_COOLER
|
||||
TEMP_COOLER_PIN,
|
||||
#endif
|
||||
#if HAS_TEMP_ADC_1
|
||||
TEMP_1,
|
||||
#endif
|
||||
|
|
@ -385,6 +391,9 @@ void HAL_adc_start_conversion(const uint8_t adc_pin) {
|
|||
#if HAS_TEMP_CHAMBER
|
||||
case TEMP_CHAMBER_PIN: pin_index = TEMP_CHAMBER; break;
|
||||
#endif
|
||||
#if HAS_TEMP_COOLER
|
||||
case TEMP_COOLER_PIN: pin_index = TEMP_COOLER; break;
|
||||
#endif
|
||||
#if HAS_TEMP_ADC_1
|
||||
case TEMP_1_PIN: pin_index = TEMP_1; break;
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -43,26 +43,27 @@ Serial0Type<USBCompositeSerial> MarlinCompositeSerial(true);
|
|||
|
||||
#if ENABLED(EMERGENCY_PARSER)
|
||||
|
||||
// The original callback is not called (no way to retrieve address).
|
||||
// That callback detects a special STM32 reset sequence: this functionality is not essential
|
||||
// as M997 achieves the same.
|
||||
void my_rx_callback(unsigned int, void*) {
|
||||
// max length of 16 is enough to contain all emergency commands
|
||||
uint8 buf[16];
|
||||
// The original callback is not called (no way to retrieve address).
|
||||
// That callback detects a special STM32 reset sequence: this functionality is not essential
|
||||
// as M997 achieves the same.
|
||||
void my_rx_callback(unsigned int, void*) {
|
||||
// max length of 16 is enough to contain all emergency commands
|
||||
uint8 buf[16];
|
||||
|
||||
//rx is usbSerialPart.endpoints[2]
|
||||
uint16 len = usb_get_ep_rx_count(usbSerialPart.endpoints[2].address);
|
||||
uint32 total = composite_cdcacm_data_available();
|
||||
//rx is usbSerialPart.endpoints[2]
|
||||
uint16 len = usb_get_ep_rx_count(usbSerialPart.endpoints[2].address);
|
||||
uint32 total = composite_cdcacm_data_available();
|
||||
|
||||
if (len == 0 || total == 0 || !WITHIN(total, len, COUNT(buf)))
|
||||
return;
|
||||
if (len == 0 || total == 0 || !WITHIN(total, len, COUNT(buf)))
|
||||
return;
|
||||
|
||||
// cannot get character by character due to bug in composite_cdcacm_peek_ex
|
||||
len = composite_cdcacm_peek(buf, total);
|
||||
// cannot get character by character due to bug in composite_cdcacm_peek_ex
|
||||
len = composite_cdcacm_peek(buf, total);
|
||||
|
||||
for (uint32 i = 0; i < len; i++)
|
||||
emergency_parser.update(MarlinCompositeSerial.emergency_state, buf[i+total-len]);
|
||||
}
|
||||
|
||||
for (uint32 i = 0; i < len; i++)
|
||||
emergency_parser.update(MarlinCompositeSerial.emergency_state, buf[i+total-len]);
|
||||
}
|
||||
#endif
|
||||
|
||||
void MSC_SD_init() {
|
||||
|
|
@ -87,7 +88,7 @@ void MSC_SD_init() {
|
|||
MarlinCompositeSerial.registerComponent();
|
||||
USBComposite.begin();
|
||||
#if ENABLED(EMERGENCY_PARSER)
|
||||
composite_cdcacm_set_hooks(USBHID_CDCACM_HOOK_RX, my_rx_callback);
|
||||
composite_cdcacm_set_hooks(USBHID_CDCACM_HOOK_RX, my_rx_callback);
|
||||
#endif
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -247,6 +247,8 @@
|
|||
|
||||
#define STR_HEATER_BED "bed"
|
||||
#define STR_HEATER_CHAMBER "chamber"
|
||||
#define STR_COOLER "cooler"
|
||||
#define STR_LASER_TEMP "laser temperature"
|
||||
|
||||
#define STR_STOPPED_HEATER ", system stopped! Heater_ID: "
|
||||
#define STR_REDUNDANCY "Heater switched off. Temperature difference between temp sensors is too high !"
|
||||
|
|
|
|||
37
Marlin/src/feature/cooler.cpp
Normal file
37
Marlin/src/feature/cooler.cpp
Normal file
|
|
@ -0,0 +1,37 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "../inc/MarlinConfig.h"
|
||||
|
||||
#if HAS_COOLER
|
||||
|
||||
#include "cooler.h"
|
||||
Cooler cooler;
|
||||
|
||||
uint16_t Cooler::flowrate; // Flow meter reading in liters, 0 will result in shutdown if equiped
|
||||
uint8_t Cooler::mode = 0; // 0 = CO2 Liquid cooling, 1 = Laser Diode TEC Heatsink Cooling
|
||||
uint16_t Cooler::capacity; // Cooling capacity in watts
|
||||
uint16_t Cooler::load; // Cooling load in watts
|
||||
bool Cooler::flowmeter = false;
|
||||
bool Cooler::state = false; // on = true, off = false
|
||||
|
||||
#endif
|
||||
50
Marlin/src/feature/cooler.h
Normal file
50
Marlin/src/feature/cooler.h
Normal file
|
|
@ -0,0 +1,50 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#define _MSG_COOLER(M) MSG_COOLER_##M
|
||||
#define MSG_COOLER(M) _MSG_COOLER(M)
|
||||
|
||||
// Cooling device
|
||||
|
||||
class Cooler {
|
||||
public:
|
||||
static uint16_t flowrate; // Flow meter reading in liters, 0 will result in shutdown if equiped
|
||||
static uint8_t mode; // 0 = CO2 Liquid cooling, 1 = Laser Diode TEC Heatsink Cooling
|
||||
static uint16_t capacity; // Cooling capacity in watts
|
||||
static uint16_t load; // Cooling load in watts
|
||||
static bool flowmeter;
|
||||
static bool state; // on = true, off = false
|
||||
|
||||
static bool is_enabled() { return state; }
|
||||
static void enable() { state = true; }
|
||||
static void disable() { state = false; }
|
||||
static void set_mode(const uint8_t m) { mode = m; }
|
||||
static void set_flowmeter(const bool sflag) { flowmeter = sflag; }
|
||||
static uint16_t get_flowrate() { return flowrate; }
|
||||
static void update_flowrate(uint16_t flow) { flowrate = flow; }
|
||||
//static void init() { set_state(false); }
|
||||
};
|
||||
|
||||
extern Cooler cooler;
|
||||
|
|
@ -61,6 +61,9 @@ bool Power::is_power_needed() {
|
|||
if (TERN0(AUTO_POWER_CHAMBER_FAN, thermalManager.chamberfan_speed))
|
||||
return true;
|
||||
|
||||
if (TERN0(AUTO_POWER_COOLER_FAN, thermalManager.coolerfan_speed))
|
||||
return true;
|
||||
|
||||
// If any of the drivers or the bed are enabled...
|
||||
if (X_ENABLE_READ() == X_ENABLE_ON || Y_ENABLE_READ() == Y_ENABLE_ON || Z_ENABLE_READ() == Z_ENABLE_ON
|
||||
#if HAS_X2_ENABLE
|
||||
|
|
@ -89,6 +92,10 @@ bool Power::is_power_needed() {
|
|||
if (thermalManager.degChamber() >= AUTO_POWER_CHAMBER_TEMP) return true;
|
||||
#endif
|
||||
|
||||
#if HAS_COOLER && AUTO_POWER_COOLER_TEMP
|
||||
if (thermalManager.degCooler() >= AUTO_POWER_COOLER_TEMP) return true;
|
||||
#endif
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -36,17 +36,7 @@
|
|||
#include "../../module/temperature.h"
|
||||
#include "../../module/probe.h"
|
||||
#include "../../feature/probe_temp_comp.h"
|
||||
|
||||
#include "../../lcd/marlinui.h"
|
||||
#include "../../MarlinCore.h" // for wait_for_heatup, idle()
|
||||
|
||||
#if ENABLED(PRINTJOB_TIMER_AUTOSTART)
|
||||
#include "../../module/printcounter.h"
|
||||
#endif
|
||||
|
||||
#if ENABLED(PRINTER_EVENTS_LEDS)
|
||||
#include "../../feature/leds/leds.h"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* G76: calibrate probe and/or bed temperature offsets
|
||||
|
|
@ -173,7 +163,6 @@ void GcodeSuite::G76() {
|
|||
|
||||
remember_feedrate_scaling_off();
|
||||
|
||||
|
||||
/******************************************
|
||||
* Calibrate bed temperature offsets
|
||||
******************************************/
|
||||
|
|
|
|||
|
|
@ -539,6 +539,11 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
|
|||
case 191: M191(); break; // M191: Wait for chamber temperature to reach target
|
||||
#endif
|
||||
|
||||
#if HAS_COOLER
|
||||
case 143: M143(); break; // M143: Set cooler temperature
|
||||
case 193: M193(); break; // M193: Wait for cooler temperature to reach target
|
||||
#endif
|
||||
|
||||
#if BOTH(AUTO_REPORT_TEMPERATURES, HAS_TEMP_SENSOR)
|
||||
case 155: M155(); break; // M155: Set temperature auto-report interval
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -153,6 +153,7 @@
|
|||
* M129 - EtoP Closed. (Requires BARICUDA)
|
||||
* M140 - Set bed target temp. S<temp>
|
||||
* M141 - Set heated chamber target temp. S<temp> (Requires a chamber heater)
|
||||
* M143 - Set cooler target temp. S<temp> (Requires a laser cooling device)
|
||||
* M145 - Set heatup values for materials on the LCD. H<hotend> B<bed> F<fan speed> for S<material> (0=PLA, 1=ABS)
|
||||
* M149 - Set temperature units. (Requires TEMPERATURE_UNITS_SUPPORT)
|
||||
* M150 - Set Status LED Color as R<red> U<green> B<blue> W<white> P<bright>. Values 0-255. (Requires BLINKM, RGB_LED, RGBW_LED, NEOPIXEL_LED, PCA9533, or PCA9632).
|
||||
|
|
@ -163,6 +164,7 @@
|
|||
* M166 - Set the Gradient Mix for the mixing extruder. (Requires GRADIENT_MIX)
|
||||
* M190 - S<temp> Wait for bed current temp to reach target temp. ** Wait only when heating! **
|
||||
* R<temp> Wait for bed current temp to reach target temp. ** Wait for heating or cooling. **
|
||||
* M193 - R<temp> Wait for cooler temp to reach target temp. ** Wait for cooling. **
|
||||
* M200 - Set filament diameter, D<diameter>, setting E axis units to cubic. (Use S0 to revert to linear units.)
|
||||
* M201 - Set max acceleration in units/s^2 for print moves: "M201 X<accel> Y<accel> Z<accel> E<accel>"
|
||||
* M202 - Set max acceleration in units/s^2 for travel moves: "M202 X<accel> Y<accel> Z<accel> E<accel>" ** UNUSED IN MARLIN! **
|
||||
|
|
@ -632,6 +634,11 @@ private:
|
|||
static void M191();
|
||||
#endif
|
||||
|
||||
#if HAS_COOLER
|
||||
static void M143();
|
||||
static void M193();
|
||||
#endif
|
||||
|
||||
#if PREHEAT_COUNT
|
||||
static void M145();
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -141,6 +141,9 @@ void GcodeSuite::M115() {
|
|||
// CHAMBER_TEMPERATURE (M141, M191)
|
||||
cap_line(PSTR("CHAMBER_TEMPERATURE"), ENABLED(HAS_HEATED_CHAMBER));
|
||||
|
||||
// COOLER_TEMPERATURE (M143, M193)
|
||||
cap_line(PSTR("COOLER_TEMPERATURE"), ENABLED(HAS_COOLER));
|
||||
|
||||
// MEATPACK Compresson
|
||||
cap_line(PSTR("MEATPACK"), ENABLED(MEATPACK));
|
||||
|
||||
|
|
|
|||
|
|
@ -32,19 +32,8 @@
|
|||
|
||||
#include "../gcode.h"
|
||||
#include "../../module/temperature.h"
|
||||
#include "../../module/motion.h"
|
||||
#include "../../lcd/marlinui.h"
|
||||
|
||||
#if ENABLED(PRINTJOB_TIMER_AUTOSTART)
|
||||
#include "../../module/printcounter.h"
|
||||
#endif
|
||||
|
||||
#if ENABLED(PRINTER_EVENT_LEDS)
|
||||
#include "../../feature/leds/leds.h"
|
||||
#endif
|
||||
|
||||
#include "../../MarlinCore.h" // for wait_for_heatup, idle, startOrResumeJob
|
||||
|
||||
/**
|
||||
* M140: Set bed temperature
|
||||
*
|
||||
|
|
|
|||
|
|
@ -32,20 +32,8 @@
|
|||
|
||||
#include "../gcode.h"
|
||||
#include "../../module/temperature.h"
|
||||
|
||||
#include "../../module/motion.h"
|
||||
#include "../../lcd/marlinui.h"
|
||||
|
||||
#if ENABLED(PRINTJOB_TIMER_AUTOSTART)
|
||||
#include "../../module/printcounter.h"
|
||||
#endif
|
||||
|
||||
#if ENABLED(PRINTER_EVENT_LEDS)
|
||||
#include "../../feature/leds/leds.h"
|
||||
#endif
|
||||
|
||||
#include "../../MarlinCore.h" // for wait_for_heatup, idle, startOrResumeJob
|
||||
|
||||
/**
|
||||
* M141: Set chamber temperature
|
||||
*/
|
||||
|
|
|
|||
67
Marlin/src/gcode/temp/M143_M193.cpp
Normal file
67
Marlin/src/gcode/temp/M143_M193.cpp
Normal file
|
|
@ -0,0 +1,67 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* gcode/temp/M143_M193.cpp
|
||||
*
|
||||
* Laser Cooler target temperature control
|
||||
*/
|
||||
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
|
||||
#if HAS_COOLER
|
||||
|
||||
#include "../../feature/cooler.h"
|
||||
extern Cooler cooler;
|
||||
|
||||
#include "../gcode.h"
|
||||
#include "../../module/temperature.h"
|
||||
#include "../../lcd/marlinui.h"
|
||||
|
||||
/**
|
||||
* M143: Set cooler temperature
|
||||
*/
|
||||
void GcodeSuite::M143() {
|
||||
if (DEBUGGING(DRYRUN)) return;
|
||||
if (parser.seenval('S')) {
|
||||
thermalManager.setTargetCooler(parser.value_celsius());
|
||||
parser.value_celsius() ? cooler.enable() : cooler.disable();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* M193: Sxxx Wait for laser current temp to reach target temp. Waits only when cooling.
|
||||
*/
|
||||
void GcodeSuite::M193() {
|
||||
if (DEBUGGING(DRYRUN)) return;
|
||||
|
||||
if (parser.seenval('S')) {
|
||||
cooler.enable();
|
||||
thermalManager.setTargetCooler(parser.value_celsius());
|
||||
if (thermalManager.isLaserCooling()) {
|
||||
ui.set_status_P(GET_TEXT(MSG_LASER_COOLING));
|
||||
thermalManager.wait_for_cooler(true);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
#endif // HAS_COOLER
|
||||
|
|
@ -114,6 +114,10 @@
|
|||
#undef THERMAL_PROTECTION_CHAMBER
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == 0
|
||||
#undef THERMAL_PROTECTION_COOLER
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIXING_EXTRUDER) && (ENABLED(RETRACT_SYNC_MIXING) || BOTH(FILAMENT_LOAD_UNLOAD_GCODES, FILAMENT_UNLOAD_ALL_EXTRUDERS))
|
||||
#define HAS_MIXER_SYNC_CHANNEL 1
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -399,7 +399,7 @@
|
|||
* Temp Sensor defines
|
||||
*/
|
||||
|
||||
#define ANY_TEMP_SENSOR_IS(n) (TEMP_SENSOR_0 == (n) || TEMP_SENSOR_1 == (n) || TEMP_SENSOR_2 == (n) || TEMP_SENSOR_3 == (n) || TEMP_SENSOR_4 == (n) || TEMP_SENSOR_5 == (n) || TEMP_SENSOR_6 == (n) || TEMP_SENSOR_7 == (n) || TEMP_SENSOR_BED == (n) || TEMP_SENSOR_PROBE == (n) || TEMP_SENSOR_CHAMBER == (n))
|
||||
#define ANY_TEMP_SENSOR_IS(n) (TEMP_SENSOR_0 == (n) || TEMP_SENSOR_1 == (n) || TEMP_SENSOR_2 == (n) || TEMP_SENSOR_3 == (n) || TEMP_SENSOR_4 == (n) || TEMP_SENSOR_5 == (n) || TEMP_SENSOR_6 == (n) || TEMP_SENSOR_7 == (n) || TEMP_SENSOR_BED == (n) || TEMP_SENSOR_PROBE == (n) || TEMP_SENSOR_CHAMBER == (n) || TEMP_SENSOR_COOLER == (n))
|
||||
|
||||
#if ANY_TEMP_SENSOR_IS(1000)
|
||||
#define HAS_USER_THERMISTORS 1
|
||||
|
|
@ -744,6 +744,27 @@
|
|||
#undef CHAMBER_MAXTEMP
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER == -4
|
||||
#define COOLER_USES_AD8495 1
|
||||
#elif TEMP_SENSOR_COOLER == -3
|
||||
#error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_COOLER."
|
||||
#elif TEMP_SENSOR_COOLER == -2
|
||||
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_COOLER."
|
||||
#elif TEMP_SENSOR_COOLER == -1
|
||||
#define COOLER_USES_AD595 1
|
||||
#elif TEMP_SENSOR_COOLER > 0
|
||||
#define TEMP_SENSOR_COOLER_THERMISTOR_ID TEMP_SENSOR_COOLER
|
||||
#define TEMP_SENSOR_COOLER_IS_THERMISTOR 1
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define COOLER_USER_THERMISTOR 1
|
||||
#elif TEMP_SENSOR_COOLER == 998 || TEMP_SENSOR_COOLER == 999
|
||||
#define COOLER_DUMMY_THERMISTOR 1
|
||||
#endif
|
||||
#else
|
||||
#undef COOLER_MINTEMP
|
||||
#undef COOLER_MAXTEMP
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE == -4
|
||||
#define TEMP_SENSOR_PROBE_IS_AD8495 1
|
||||
#elif TEMP_SENSOR_PROBE == -3
|
||||
|
|
@ -1928,6 +1949,9 @@
|
|||
#if HAS_ADC_TEST(CHAMBER)
|
||||
#define HAS_TEMP_ADC_CHAMBER 1
|
||||
#endif
|
||||
#if HAS_ADC_TEST(COOLER)
|
||||
#define HAS_TEMP_ADC_COOLER 1
|
||||
#endif
|
||||
|
||||
#define HAS_TEMP(N) ANY(HAS_TEMP_ADC_##N, TEMP_SENSOR_##N##_IS_MAX_TC, TEMP_SENSOR_##N##_IS_DUMMY)
|
||||
#if HAS_HOTEND && HAS_TEMP(0)
|
||||
|
|
@ -1942,6 +1966,9 @@
|
|||
#if HAS_TEMP(CHAMBER)
|
||||
#define HAS_TEMP_CHAMBER 1
|
||||
#endif
|
||||
#if HAS_TEMP(COOLER)
|
||||
#define HAS_TEMP_COOLER 1
|
||||
#endif
|
||||
|
||||
#if ENABLED(JOYSTICK)
|
||||
#if PIN_EXISTS(JOY_X)
|
||||
|
|
@ -2001,7 +2028,10 @@
|
|||
#if HAS_HEATED_BED || HAS_TEMP_CHAMBER
|
||||
#define BED_OR_CHAMBER 1
|
||||
#endif
|
||||
#if HAS_TEMP_HOTEND || BED_OR_CHAMBER || HAS_TEMP_PROBE
|
||||
#if HAS_TEMP_COOLER && PIN_EXISTS(COOLER)
|
||||
#define HAS_COOLER 1
|
||||
#endif
|
||||
#if HAS_TEMP_HOTEND || BED_OR_CHAMBER || HAS_TEMP_PROBE || HAS_TEMP_COOLER
|
||||
#define HAS_TEMP_SENSOR 1
|
||||
#endif
|
||||
|
||||
|
|
@ -2033,9 +2063,13 @@
|
|||
#if BOTH(HAS_HEATED_CHAMBER, THERMAL_PROTECTION_CHAMBER) && WATCH_CHAMBER_TEMP_PERIOD > 0
|
||||
#define WATCH_CHAMBER 1
|
||||
#endif
|
||||
#if BOTH(HAS_COOLER, THERMAL_PROTECTION_COOLER) && WATCH_COOLER_TEMP_PERIOD > 0
|
||||
#define WATCH_COOLER 1
|
||||
#endif
|
||||
#if (ENABLED(THERMAL_PROTECTION_HOTENDS) || !EXTRUDERS) \
|
||||
&& (ENABLED(THERMAL_PROTECTION_BED) || !HAS_HEATED_BED) \
|
||||
&& (ENABLED(THERMAL_PROTECTION_CHAMBER) || !HAS_HEATED_CHAMBER)
|
||||
&& (ENABLED(THERMAL_PROTECTION_CHAMBER) || !HAS_HEATED_CHAMBER) \
|
||||
&& (ENABLED(THERMAL_PROTECTION_COOLER) || !HAS_COOLER)
|
||||
#define THERMALLY_SAFE 1
|
||||
#endif
|
||||
|
||||
|
|
@ -2067,8 +2101,11 @@
|
|||
#if HAS_TEMP_CHAMBER && PIN_EXISTS(CHAMBER_AUTO_FAN)
|
||||
#define HAS_AUTO_CHAMBER_FAN 1
|
||||
#endif
|
||||
#if HAS_TEMP_COOLER && PIN_EXISTS(COOLER_AUTO_FAN)
|
||||
#define HAS_AUTO_COOLER_FAN 1
|
||||
#endif
|
||||
|
||||
#if ANY(HAS_AUTO_FAN_0, HAS_AUTO_FAN_1, HAS_AUTO_FAN_2, HAS_AUTO_FAN_3, HAS_AUTO_FAN_4, HAS_AUTO_FAN_5, HAS_AUTO_FAN_6, HAS_AUTO_FAN_7, HAS_AUTO_CHAMBER_FAN)
|
||||
#if ANY(HAS_AUTO_FAN_0, HAS_AUTO_FAN_1, HAS_AUTO_FAN_2, HAS_AUTO_FAN_3, HAS_AUTO_FAN_4, HAS_AUTO_FAN_5, HAS_AUTO_FAN_6, HAS_AUTO_FAN_7, HAS_AUTO_CHAMBER_FAN, HAS_AUTO_COOLER_FAN)
|
||||
#define HAS_AUTO_FAN 1
|
||||
#endif
|
||||
#define _FANOVERLAP(A,B) (A##_AUTO_FAN_PIN == E##B##_AUTO_FAN_PIN)
|
||||
|
|
@ -2364,7 +2401,20 @@
|
|||
#define WRITE_HEATER_CHAMBER(v) WRITE(HEATER_CHAMBER_PIN, (v) ^ HEATER_CHAMBER_INVERTING)
|
||||
#endif
|
||||
|
||||
#if HAS_HOTEND || HAS_HEATED_BED || HAS_HEATED_CHAMBER
|
||||
/**
|
||||
* Laser Cooling requires settings
|
||||
*/
|
||||
#if HAS_COOLER
|
||||
#ifndef MAX_COOLER_POWER
|
||||
#define MAX_COOLER_POWER 255
|
||||
#endif
|
||||
#ifndef COOLER_INVERTING
|
||||
#define COOLER_INVERTING true
|
||||
#endif
|
||||
#define WRITE_HEATER_COOLER(v) WRITE(COOLER_PIN, (v) ^ COOLER_INVERTING)
|
||||
#endif
|
||||
|
||||
#if HAS_HOTEND || HAS_HEATED_BED || HAS_HEATED_CHAMBER || HAS_COOLER
|
||||
#define HAS_TEMPERATURE 1
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -1876,6 +1876,10 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
|
|||
#error "TEMP_SENSOR_CHAMBER requires TEMP_CHAMBER_PIN."
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER && !(PIN_EXISTS(TEMP_COOLER) && ENABLED(LASER_FEATURE))
|
||||
#error "TEMP_SENSOR_COOLER requires LASER_FEATURE and TEMP_COOLER_PIN."
|
||||
#endif
|
||||
|
||||
#if ENABLED(CHAMBER_FAN) && !(defined(CHAMBER_FAN_MODE) && WITHIN(CHAMBER_FAN_MODE, 0, 2))
|
||||
#error "CHAMBER_FAN_MODE must be between 0 and 2."
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -78,6 +78,16 @@
|
|||
#define STATUS_CUTTER_WIDTH 0
|
||||
#endif
|
||||
|
||||
//
|
||||
// Laser Cooler
|
||||
//
|
||||
#if !STATUS_COOLER_WIDTH && HAS_COOLER
|
||||
#include "status/cooler.h"
|
||||
#endif
|
||||
#ifndef STATUS_COOLER_WIDTH
|
||||
#define STATUS_COOLER_WIDTH 0
|
||||
#endif
|
||||
|
||||
//
|
||||
// Bed
|
||||
//
|
||||
|
|
@ -498,6 +508,47 @@
|
|||
|
||||
#endif
|
||||
|
||||
//
|
||||
// Cooler Bitmap Properties
|
||||
//
|
||||
#ifndef STATUS_COOLER_BYTEWIDTH
|
||||
#define STATUS_COOLER_BYTEWIDTH BW(STATUS_COOLER_WIDTH)
|
||||
#endif
|
||||
#if STATUS_COOLER_WIDTH
|
||||
|
||||
#ifndef STATUS_COOLER_X
|
||||
#define STATUS_COOLER_X (LCD_PIXEL_WIDTH - (STATUS_COOLER_BYTEWIDTH + STATUS_FAN_BYTEWIDTH + STATUS_CUTTER_BYTEWIDTH) * 8)
|
||||
#endif
|
||||
|
||||
#ifndef STATUS_COOLER_HEIGHT
|
||||
#ifdef STATUS_COOLER_ANIM
|
||||
#define STATUS_COOLER_HEIGHT(S) ((S) ? sizeof(status_cooler_on_bmp) / (STATUS_COOLER_BYTEWIDTH) : sizeof(status_cooler_bmp) / (STATUS_COOLER_BYTEWIDTH))
|
||||
#else
|
||||
#define STATUS_COOLER_HEIGHT(S) (sizeof(status_cooler_bmp) / (STATUS_COOLER_BYTEWIDTH))
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifndef STATUS_COOLER_Y
|
||||
#define STATUS_COOLER_Y(S) (18 - STATUS_COOLER_HEIGHT(S))
|
||||
#endif
|
||||
|
||||
#ifndef STATUS_COOLER_TEXT_X
|
||||
#define STATUS_COOLER_TEXT_X (STATUS_COOLER_X + 8)
|
||||
#endif
|
||||
|
||||
static_assert(
|
||||
sizeof(status_cooler_bmp) == (STATUS_COOLER_BYTEWIDTH) * (STATUS_COOLER_HEIGHT(0)),
|
||||
"Status cooler bitmap (status_cooler_bmp) dimensions don't match data."
|
||||
);
|
||||
#ifdef STATUS_COOLER_ANIM
|
||||
static_assert(
|
||||
sizeof(status_cooler_on_bmp) == (STATUS_COOLER_BYTEWIDTH) * (STATUS_COOLER_HEIGHT(1)),
|
||||
"Status cooler bitmap (status_cooler_on_bmp) dimensions don't match data."
|
||||
);
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
//
|
||||
// Bed Bitmap Properties
|
||||
//
|
||||
|
|
@ -585,6 +636,10 @@
|
|||
#if HAS_CUTTER && !DO_DRAW_BED
|
||||
#define DO_DRAW_CUTTER 1
|
||||
#endif
|
||||
#if HAS_COOLER
|
||||
#define DO_DRAW_COOLER 1
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_CHAMBER && STATUS_CHAMBER_WIDTH && HOTENDS <= 4
|
||||
#define DO_DRAW_CHAMBER 1
|
||||
#endif
|
||||
|
|
@ -603,6 +658,9 @@
|
|||
#if BOTH(DO_DRAW_CUTTER, STATUS_CUTTER_ANIM)
|
||||
#define ANIM_CUTTER 1
|
||||
#endif
|
||||
#if BOTH(DO_DRAW_COOLER, STATUS_COOLER_ANIM)
|
||||
#define ANIM_COOLER 1
|
||||
#endif
|
||||
#if ANIM_HOTEND || ANIM_BED || ANIM_CHAMBER || ANIM_CUTTER
|
||||
#define ANIM_HBCC 1
|
||||
#endif
|
||||
|
|
|
|||
70
Marlin/src/lcd/dogm/status/cooler.h
Normal file
70
Marlin/src/lcd/dogm/status/cooler.h
Normal file
|
|
@ -0,0 +1,70 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
//
|
||||
// lcd/dogm/status/cooler.h - Status Screen Laser Cooler bitmaps
|
||||
//
|
||||
|
||||
#define STATUS_COOLER_WIDTH 16
|
||||
|
||||
#ifdef STATUS_COOLER_ANIM
|
||||
|
||||
const unsigned char status_cooler_on_bmp[] PROGMEM = {
|
||||
B00010000,B00001000,
|
||||
B00010010,B01001001,
|
||||
B01010100,B00101010,
|
||||
B00111000,B00011100,
|
||||
B11111110,B11111111,
|
||||
B00111000,B00011100,
|
||||
B01010100,B00101010,
|
||||
B10010000,B10001001,
|
||||
B00010000,B10000000,
|
||||
B00000100,B10010000,
|
||||
B00000010,B10100000,
|
||||
B00000001,B11000000,
|
||||
B00011111,B11111100,
|
||||
B00000001,B11000000,
|
||||
B00000010,B10100000,
|
||||
B00000100,B10010000
|
||||
};
|
||||
|
||||
#endif
|
||||
|
||||
const unsigned char status_cooler_bmp[] PROGMEM = {
|
||||
B00010000,B00001000,
|
||||
B00010010,B01001001,
|
||||
B01010100,B00101010,
|
||||
B00101000,B00010100,
|
||||
B11000111,B01100011,
|
||||
B00101000,B00010100,
|
||||
B01010100,B00101010,
|
||||
B10010000,B10001001,
|
||||
B00010000,B10000000,
|
||||
B00000100,B10010000,
|
||||
B00000010,B10100000,
|
||||
B00000001,B01000000,
|
||||
B00011110,B00111100,
|
||||
B00000001,B01000000,
|
||||
B00000010,B10100000,
|
||||
B00000100,B10010000
|
||||
};
|
||||
|
|
@ -86,6 +86,7 @@
|
|||
HEATBIT_HOTEND,
|
||||
HEATBIT_BED = HOTENDS,
|
||||
HEATBIT_CHAMBER,
|
||||
HEATBIT_COOLER,
|
||||
HEATBIT_CUTTER
|
||||
};
|
||||
IF<(HEATBIT_CUTTER > 7), uint16_t, uint8_t>::type heat_bits;
|
||||
|
|
@ -111,6 +112,11 @@
|
|||
#else
|
||||
#define CUTTER_ALT() false
|
||||
#endif
|
||||
#if ANIM_COOLER
|
||||
#define COOLER_ALT(N) TEST(heat_bits, HEATBIT_COOLER)
|
||||
#else
|
||||
#define COOLER_ALT() false
|
||||
#endif
|
||||
|
||||
#if DO_DRAW_HOTENDS
|
||||
#define MAX_HOTEND_DRAW _MIN(HOTENDS, ((LCD_PIXEL_WIDTH - (STATUS_LOGO_BYTEWIDTH + STATUS_FAN_BYTEWIDTH) * 8) / (STATUS_HEATERS_XSPACE)))
|
||||
|
|
@ -361,18 +367,22 @@ FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, cons
|
|||
#endif // DO_DRAW_BED
|
||||
|
||||
#if DO_DRAW_CHAMBER
|
||||
|
||||
FORCE_INLINE void _draw_chamber_status() {
|
||||
#if HAS_HEATED_CHAMBER
|
||||
if (PAGE_UNDER(7))
|
||||
_draw_centered_temp(thermalManager.degTargetChamber() + 0.5f, STATUS_CHAMBER_TEXT_X, 7);
|
||||
#endif
|
||||
|
||||
if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1))
|
||||
_draw_centered_temp(thermalManager.degChamber() + 0.5f, STATUS_CHAMBER_TEXT_X, 28);
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // DO_DRAW_CHAMBER
|
||||
#if DO_DRAW_COOLER
|
||||
FORCE_INLINE void _draw_cooler_status() {
|
||||
if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1))
|
||||
_draw_centered_temp(thermalManager.degCooler(), STATUS_COOLER_TEXT_X, 28);
|
||||
}
|
||||
#endif
|
||||
|
||||
//
|
||||
// Before homing, blink '123' <-> '???'.
|
||||
|
|
@ -447,6 +457,9 @@ void MarlinUI::draw_status_screen() {
|
|||
#if DO_DRAW_CHAMBER && HAS_HEATED_CHAMBER
|
||||
if (thermalManager.isHeatingChamber()) SBI(new_bits, HEATBIT_CHAMBER);
|
||||
#endif
|
||||
#if DO_DRAW_COOLER && HAS_COOLER
|
||||
if (thermalManager.isLaserCooling()) SBI(new_bits, HEATBIT_COOLER);
|
||||
#endif
|
||||
if (TERN0(ANIM_CUTTER, cutter.enabled())) SBI(new_bits, HEATBIT_CUTTER);
|
||||
heat_bits = new_bits;
|
||||
#endif
|
||||
|
|
@ -631,12 +644,28 @@ void MarlinUI::draw_status_screen() {
|
|||
}
|
||||
#endif
|
||||
|
||||
// Laser Cooler
|
||||
#if DO_DRAW_COOLER
|
||||
#if ANIM_COOLER
|
||||
#define COOLER_BITMAP(S) ((S) ? status_cooler_bmp : status_cooler_on_bmp)
|
||||
#else
|
||||
#define COOLER_BITMAP(S) status_cooler_bmp
|
||||
#endif
|
||||
const uint8_t coolery = STATUS_COOLER_Y(COOLER_ALT()),
|
||||
coolerh = STATUS_COOLER_HEIGHT(COOLER_ALT());
|
||||
if (PAGE_CONTAINS(coolery, coolery + coolerh - 1))
|
||||
u8g.drawBitmapP(STATUS_COOLER_X, coolery, STATUS_COOLER_BYTEWIDTH, coolerh, COOLER_BITMAP(COOLER_ALT()));
|
||||
#endif
|
||||
|
||||
// Heated Bed
|
||||
TERN_(DO_DRAW_BED, _draw_bed_status(blink));
|
||||
|
||||
// Heated Chamber
|
||||
TERN_(DO_DRAW_CHAMBER, _draw_chamber_status());
|
||||
|
||||
// Cooler
|
||||
TERN_(DO_DRAW_COOLER, _draw_cooler_status());
|
||||
|
||||
// Fan, if a bitmap was provided
|
||||
#if DO_DRAW_FAN
|
||||
if (PAGE_CONTAINS(STATUS_FAN_TEXT_Y - INFO_FONT_ASCENT, STATUS_FAN_TEXT_Y - 1)) {
|
||||
|
|
|
|||
|
|
@ -176,6 +176,7 @@ namespace ExtUI {
|
|||
case BED: thermalManager.reset_bed_idle_timer(); return;
|
||||
#endif
|
||||
TERN_(HAS_HEATED_CHAMBER, case CHAMBER: return); // Chamber has no idle timer
|
||||
TERN_(HAS_COOLER, case COOLER: return); // Cooler has no idle timer
|
||||
default:
|
||||
TERN_(HAS_HOTEND, thermalManager.reset_hotend_idle_timer(heater - H0));
|
||||
break;
|
||||
|
|
@ -904,22 +905,23 @@ namespace ExtUI {
|
|||
value *= TOUCH_UI_LCD_TEMP_SCALING;
|
||||
#endif
|
||||
enableHeater(heater);
|
||||
#if HAS_HEATED_CHAMBER
|
||||
if (heater == CHAMBER)
|
||||
thermalManager.setTargetChamber(LROUND(constrain(value, 0, CHAMBER_MAXTEMP - 10)));
|
||||
else
|
||||
#endif
|
||||
#if HAS_HEATED_BED
|
||||
if (heater == BED)
|
||||
thermalManager.setTargetBed(LROUND(constrain(value, 0, BED_MAX_TARGET)));
|
||||
else
|
||||
#endif
|
||||
{
|
||||
switch (heater) {
|
||||
#if HAS_HEATED_CHAMBER
|
||||
case CHAMBER: thermalManager.setTargetChamber(LROUND(constrain(value, 0, CHAMBER_MAXTEMP - 10))); break;
|
||||
#endif
|
||||
#if HAS_COOLER
|
||||
case COOLER: thermalManager.setTargetCooler(LROUND(constrain(value, 0, COOLER_MAXTEMP))); break;
|
||||
#endif
|
||||
#if HAS_HEATED_BED
|
||||
case BED: thermalManager.setTargetBed(LROUND(constrain(value, 0, BED_MAX_TARGET))); break;
|
||||
#endif
|
||||
default: {
|
||||
#if HAS_HOTEND
|
||||
const int16_t e = heater - H0;
|
||||
thermalManager.setTargetHotend(LROUND(constrain(value, 0, thermalManager.heater_maxtemp[e] - HOTEND_OVERSHOOT)), e);
|
||||
#endif
|
||||
}
|
||||
} break;
|
||||
}
|
||||
}
|
||||
|
||||
void setTargetTemp_celsius(float value, const extruder_t extruder) {
|
||||
|
|
|
|||
|
|
@ -55,7 +55,7 @@ namespace ExtUI {
|
|||
|
||||
enum axis_t : uint8_t { X, Y, Z, X2, Y2, Z2, Z3, Z4 };
|
||||
enum extruder_t : uint8_t { E0, E1, E2, E3, E4, E5, E6, E7 };
|
||||
enum heater_t : uint8_t { H0, H1, H2, H3, H4, H5, BED, CHAMBER };
|
||||
enum heater_t : uint8_t { H0, H1, H2, H3, H4, H5, BED, CHAMBER, COOLER };
|
||||
enum fan_t : uint8_t { FAN0, FAN1, FAN2, FAN3, FAN4, FAN5, FAN6, FAN7 };
|
||||
enum result_t : uint8_t { PID_BAD_EXTRUDER_NUM, PID_TEMP_TOO_HIGH, PID_TUNING_TIMEOUT, PID_DONE };
|
||||
|
||||
|
|
|
|||
|
|
@ -276,6 +276,9 @@ namespace Language_en {
|
|||
PROGMEM Language_Str MSG_NOZZLE_STANDBY = _UxGT("Nozzle Standby");
|
||||
PROGMEM Language_Str MSG_BED = _UxGT("Bed");
|
||||
PROGMEM Language_Str MSG_CHAMBER = _UxGT("Enclosure");
|
||||
PROGMEM Language_Str MSG_COOLER = _UxGT("Laser Coolant");
|
||||
PROGMEM Language_Str MSG_COOLER_TOGGLE = _UxGT("Toggle Cooler");
|
||||
PROGMEM Language_Str MSG_LASER = _UxGT("Laser");
|
||||
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Fan Speed");
|
||||
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Fan Speed ~");
|
||||
PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("Stored Fan ~");
|
||||
|
|
@ -482,6 +485,8 @@ namespace Language_en {
|
|||
PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("THERMAL RUNAWAY");
|
||||
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED = _UxGT("BED THERMAL RUNAWAY");
|
||||
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("CHAMBER T. RUNAWAY");
|
||||
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_COOLER = _UxGT("Cooler Runaway");
|
||||
PROGMEM Language_Str MSG_COOLING_FAILED = _UxGT("Cooling Failed");
|
||||
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Err: MAXTEMP");
|
||||
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Err: MINTEMP");
|
||||
PROGMEM Language_Str MSG_HALTED = _UxGT("PRINTER HALTED");
|
||||
|
|
@ -497,6 +502,7 @@ namespace Language_en {
|
|||
PROGMEM Language_Str MSG_PROBE_COOLING = _UxGT("Probe Cooling...");
|
||||
PROGMEM Language_Str MSG_CHAMBER_HEATING = _UxGT("Chamber Heating...");
|
||||
PROGMEM Language_Str MSG_CHAMBER_COOLING = _UxGT("Chamber Cooling...");
|
||||
PROGMEM Language_Str MSG_LASER_COOLING = _UxGT("Laser Cooling...");
|
||||
PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("Delta Calibration");
|
||||
PROGMEM Language_Str MSG_DELTA_CALIBRATE_X = _UxGT("Calibrate X");
|
||||
PROGMEM Language_Str MSG_DELTA_CALIBRATE_Y = _UxGT("Calibrate Y");
|
||||
|
|
|
|||
|
|
@ -195,6 +195,16 @@ void menu_info_thermistors() {
|
|||
STATIC_ITEM(TERN(WATCH_CHAMBER, MSG_INFO_RUNAWAY_ON, MSG_INFO_RUNAWAY_OFF), SS_LEFT);
|
||||
#endif
|
||||
|
||||
#if HAS_COOLER
|
||||
#undef THERMISTOR_ID
|
||||
#define THERMISTOR_ID TEMP_SENSOR_COOLER
|
||||
#include "../thermistornames.h"
|
||||
STATIC_ITEM_P(PSTR("COOL: " THERMISTOR_NAME), SS_INVERT);
|
||||
PSTRING_ITEM(MSG_INFO_MIN_TEMP, STRINGIFY(COOLER_MINTEMP), SS_LEFT);
|
||||
PSTRING_ITEM(MSG_INFO_MAX_TEMP, STRINGIFY(COOLER_MAXTEMP), SS_LEFT);
|
||||
STATIC_ITEM(TERN(WATCH_COOLER, MSG_INFO_RUNAWAY_ON, MSG_INFO_RUNAWAY_OFF), SS_LEFT);
|
||||
#endif
|
||||
|
||||
END_SCREEN();
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -35,6 +35,10 @@
|
|||
#include "../../module/motion.h"
|
||||
#endif
|
||||
|
||||
#if HAS_COOLER
|
||||
#include "../../feature/cooler.h"
|
||||
#endif
|
||||
|
||||
#if ENABLED(SINGLENOZZLE_STANDBY_TEMP)
|
||||
#include "../../module/tool_change.h"
|
||||
#endif
|
||||
|
|
@ -68,6 +72,10 @@ void Temperature::lcd_preheat(const int16_t e, const int8_t indh, const int8_t i
|
|||
#if HAS_HEATED_BED
|
||||
inline void _preheat_bed(const uint8_t m) { thermalManager.lcd_preheat(-1, -1, m); }
|
||||
#endif
|
||||
#if HAS_COOLER
|
||||
inline void _precool_laser(const uint8_t m, const uint8_t e) { thermalManager.lcd_preheat(e, m, -1); }
|
||||
void do_precool_laser_m() { _precool_laser(editable.int8, thermalManager.temp_cooler.target); }
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_HOTEND && HAS_HEATED_BED
|
||||
inline void _preheat_both(const uint8_t m, const uint8_t e) { thermalManager.lcd_preheat(e, m, m); }
|
||||
|
|
@ -143,6 +151,10 @@ void menu_temperature() {
|
|||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_COOLER
|
||||
if (thermalManager.temp_cooler.target == 0) thermalManager.temp_cooler.target = COOLER_DEFAULT_TEMP;
|
||||
#endif
|
||||
|
||||
START_MENU();
|
||||
BACK_ITEM(MSG_MAIN);
|
||||
|
||||
|
|
@ -176,6 +188,15 @@ void menu_temperature() {
|
|||
EDIT_ITEM_FAST(int3, MSG_CHAMBER, &thermalManager.temp_chamber.target, 0, CHAMBER_MAXTEMP - 10, thermalManager.start_watching_chamber);
|
||||
#endif
|
||||
|
||||
//
|
||||
// Cooler:
|
||||
//
|
||||
#if HAS_COOLER
|
||||
editable.state = cooler.is_enabled();
|
||||
EDIT_ITEM(bool, MSG_COOLER(TOGGLE), &cooler.state, []{ if (editable.state) cooler.disable(); else cooler.enable(); });
|
||||
EDIT_ITEM_FAST(int3, MSG_COOLER, &thermalManager.temp_cooler.target, COOLER_MINTEMP + 2, COOLER_MAXTEMP - 2, thermalManager.start_watching_cooler);
|
||||
#endif
|
||||
|
||||
//
|
||||
// Fan Speed:
|
||||
//
|
||||
|
|
@ -232,7 +253,7 @@ void menu_temperature() {
|
|||
editable.int8 = m;
|
||||
#if HOTENDS > 1 || HAS_HEATED_BED
|
||||
SUBMENU_S(ui.get_preheat_label(m), MSG_PREHEAT_M, menu_preheat_m);
|
||||
#else
|
||||
#elif HAS_HOTEND
|
||||
ACTION_ITEM_S(ui.get_preheat_label(m), MSG_PREHEAT_M, do_preheat_end_m);
|
||||
#endif
|
||||
}
|
||||
|
|
|
|||
|
|
@ -94,6 +94,9 @@
|
|||
#ifndef COLOR_CHAMBER
|
||||
#define COLOR_CHAMBER COLOR_DARK_ORANGE
|
||||
#endif
|
||||
#ifndef COLOR_COOLER
|
||||
#define COLOR_COOLER COLOR_DARK_ORANGE
|
||||
#endif
|
||||
#ifndef COLOR_FAN
|
||||
#define COLOR_FAN COLOR_AQUA
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -202,6 +202,12 @@ void Touch::touch(touch_control_t *control) {
|
|||
MenuItem_int3::action((const char *)GET_TEXT_F(MSG_CHAMBER), &thermalManager.temp_chamber.target, 0, CHAMBER_MAXTEMP - 10, thermalManager.start_watching_chamber);
|
||||
}
|
||||
#endif
|
||||
#if HAS_COOLER
|
||||
else if (heater == H_COOLER) {
|
||||
MenuItem_int3::action((const char *)GET_TEXT_F(MSG_COOLER), &thermalManager.temp_cooler.target, 0, COOLER_MAXTEMP - 8, thermalManager.start_watching_cooler);
|
||||
}
|
||||
#endif
|
||||
|
||||
break;
|
||||
case FAN:
|
||||
ui.clear_lcd();
|
||||
|
|
|
|||
|
|
@ -136,6 +136,12 @@ void draw_heater_status(uint16_t x, uint16_t y, const int8_t Heater) {
|
|||
#endif
|
||||
}
|
||||
#endif
|
||||
#if HAS_TEMP_COOLER
|
||||
else if (Heater == H_COOLER) {
|
||||
currentTemperature = thermalManager.degCooler();
|
||||
targetTemperature = TERN(HAS_COOLER, thermalManager.degTargetCooler(), ABSOLUTE_ZERO);
|
||||
}
|
||||
#endif
|
||||
else return;
|
||||
|
||||
TERN_(TOUCH_SCREEN, if (targetTemperature >= 0) touch.add_control(HEATER, x, y, 64, 100, Heater));
|
||||
|
|
@ -159,6 +165,13 @@ void draw_heater_status(uint16_t x, uint16_t y, const int8_t Heater) {
|
|||
image = targetTemperature > 0 ? imgChamberHeated : imgChamber;
|
||||
}
|
||||
#endif
|
||||
#if HAS_TEMP_COOLER
|
||||
else if (Heater == H_COOLER) {
|
||||
if (currentTemperature <= 26) Color = COLOR_COLD;
|
||||
if (currentTemperature > 26) Color = COLOR_RED;
|
||||
image = targetTemperature > 26 ? imgCoolerHot : imgCooler;
|
||||
}
|
||||
#endif
|
||||
|
||||
tft.add_image(0, 18, image, Color);
|
||||
|
||||
|
|
|
|||
|
|
@ -136,6 +136,12 @@ void draw_heater_status(uint16_t x, uint16_t y, const int8_t Heater) {
|
|||
#endif
|
||||
}
|
||||
#endif
|
||||
#if HAS_TEMP_COOLER
|
||||
else if (Heater == H_COOLER) {
|
||||
currentTemperature = thermalManager.degCooler();
|
||||
targetTemperature = TERN(HAS_COOLER, thermalManager.degTargetCooler(), ABSOLUTE_ZERO);
|
||||
}
|
||||
#endif
|
||||
else return;
|
||||
|
||||
TERN_(TOUCH_SCREEN, if (targetTemperature >= 0) touch.add_control(HEATER, x, y, 80, 120, Heater));
|
||||
|
|
|
|||
|
|
@ -62,6 +62,10 @@ void menu_item(const uint8_t row, bool sel = false);
|
|||
#define ITEM_CHAMBER 2
|
||||
#define ITEM_FAN 3
|
||||
#define ITEMS_COUNT 4
|
||||
#elif HAS_TEMP_COOLER
|
||||
#define ITEM_COOLER 0
|
||||
#define ITEM_FAN 1
|
||||
#define ITEMS_COUNT 2
|
||||
#elif HOTENDS > 1
|
||||
#define ITEM_E0 0
|
||||
#define ITEM_E1 1
|
||||
|
|
|
|||
|
|
@ -35,6 +35,11 @@
|
|||
#include "endstops.h"
|
||||
#include "planner.h"
|
||||
|
||||
#if HAS_COOLER
|
||||
#include "../feature/cooler.h"
|
||||
#include "../feature/spindle_laser.h"
|
||||
#endif
|
||||
|
||||
#if ENABLED(EMERGENCY_PARSER)
|
||||
#include "motion.h"
|
||||
#endif
|
||||
|
|
@ -232,8 +237,13 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
|
|||
#else
|
||||
#define _CHAMBER_PSTR(h)
|
||||
#endif
|
||||
#if HAS_COOLER
|
||||
#define _COOLER_PSTR(h) (h) == H_COOLER ? GET_TEXT(MSG_COOLER) :
|
||||
#else
|
||||
#define _COOLER_PSTR(h)
|
||||
#endif
|
||||
#define _E_PSTR(h,N) ((HOTENDS) > N && (h) == N) ? PSTR(LCD_STR_E##N) :
|
||||
#define HEATER_PSTR(h) _BED_PSTR(h) _CHAMBER_PSTR(h) _E_PSTR(h,1) _E_PSTR(h,2) _E_PSTR(h,3) _E_PSTR(h,4) _E_PSTR(h,5) PSTR(LCD_STR_E0)
|
||||
#define HEATER_PSTR(h) _BED_PSTR(h) _CHAMBER_PSTR(h) _COOLER_PSTR(h) _E_PSTR(h,1) _E_PSTR(h,2) _E_PSTR(h,3) _E_PSTR(h,4) _E_PSTR(h,5) PSTR(LCD_STR_E0)
|
||||
|
||||
// public:
|
||||
|
||||
|
|
@ -254,6 +264,9 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
|
|||
uint8_t Temperature::chamberfan_speed; // = 0
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_POWER_COOLER_FAN)
|
||||
uint8_t Temperature::coolerfan_speed; // = 0
|
||||
#endif
|
||||
#if HAS_FAN
|
||||
|
||||
uint8_t Temperature::fan_speed[FAN_COUNT]; // = { 0 }
|
||||
|
|
@ -355,14 +368,11 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
|
|||
#endif
|
||||
TERN_(WATCH_BED, bed_watch_t Temperature::watch_bed); // = { 0 }
|
||||
IF_DISABLED(PIDTEMPBED, millis_t Temperature::next_bed_check_ms);
|
||||
#endif // HAS_HEATED_BED
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_CHAMBER
|
||||
chamber_info_t Temperature::temp_chamber; // = { 0 }
|
||||
#if HAS_HEATED_CHAMBER
|
||||
int16_t fan_chamber_pwm;
|
||||
bool flag_chamber_off;
|
||||
bool flag_chamber_excess_heat = false;
|
||||
millis_t next_cool_check_ms_2 = 0;
|
||||
float old_temp = 9999;
|
||||
#ifdef CHAMBER_MINTEMP
|
||||
|
|
@ -373,8 +383,27 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
|
|||
#endif
|
||||
TERN_(WATCH_CHAMBER, chamber_watch_t Temperature::watch_chamber{0});
|
||||
IF_DISABLED(PIDTEMPCHAMBER, millis_t Temperature::next_chamber_check_ms);
|
||||
#endif // HAS_HEATED_CHAMBER
|
||||
#endif // HAS_TEMP_CHAMBER
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_COOLER
|
||||
cooler_info_t Temperature::temp_cooler; // = { 0 }
|
||||
#if HAS_COOLER
|
||||
bool flag_cooler_state;
|
||||
//bool flag_cooler_excess = false;
|
||||
float previous_temp = 9999;
|
||||
#ifdef COOLER_MINTEMP
|
||||
int16_t Temperature::mintemp_raw_COOLER = TEMP_SENSOR_COOLER_RAW_LO_TEMP;
|
||||
#endif
|
||||
#ifdef COOLER_MAXTEMP
|
||||
int16_t Temperature::maxtemp_raw_COOLER = TEMP_SENSOR_COOLER_RAW_HI_TEMP;
|
||||
#endif
|
||||
#if WATCH_COOLER
|
||||
cooler_watch_t Temperature::watch_cooler{0};
|
||||
#endif
|
||||
millis_t Temperature::next_cooler_check_ms, Temperature::cooler_fan_flush_ms;
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_PROBE
|
||||
probe_info_t Temperature::temp_probe; // = { 0 }
|
||||
|
|
@ -744,6 +773,9 @@ int16_t Temperature::getHeaterPower(const heater_id_t heater_id) {
|
|||
#if HAS_HEATED_CHAMBER
|
||||
case H_CHAMBER: return temp_chamber.soft_pwm_amount;
|
||||
#endif
|
||||
#if HAS_COOLER
|
||||
case H_COOLER: return temp_cooler.soft_pwm_amount;
|
||||
#endif
|
||||
default:
|
||||
return TERN0(HAS_HOTEND, temp_hotend[heater_id].soft_pwm_amount);
|
||||
}
|
||||
|
|
@ -779,6 +811,11 @@ int16_t Temperature::getHeaterPower(const heater_id_t heater_id) {
|
|||
SBI(fanState, pgm_read_byte(&fanBit[CHAMBER_FAN_INDEX]));
|
||||
#endif
|
||||
|
||||
#if HAS_AUTO_COOLER_FAN
|
||||
if (temp_cooler.celsius >= COOLER_AUTO_FAN_TEMPERATURE)
|
||||
SBI(fanState, pgm_read_byte(&fanBit[COOLER_FAN_INDEX]));
|
||||
#endif
|
||||
|
||||
#define _UPDATE_AUTO_FAN(P,D,A) do{ \
|
||||
if (PWM_PIN(P##_AUTO_FAN_PIN) && A < 255) \
|
||||
analogWrite(pin_t(P##_AUTO_FAN_PIN), D ? A : 0); \
|
||||
|
|
@ -874,6 +911,8 @@ void Temperature::_temp_error(const heater_id_t heater_id, PGM_P const serial_ms
|
|||
SERIAL_ECHO(heater_id);
|
||||
else if (TERN0(HAS_HEATED_CHAMBER, heater_id == H_CHAMBER))
|
||||
SERIAL_ECHOPGM(STR_HEATER_CHAMBER);
|
||||
else if (TERN0(HAS_COOLER, heater_id == H_COOLER))
|
||||
SERIAL_ECHOPGM(STR_COOLER);
|
||||
else
|
||||
SERIAL_ECHOPGM(STR_HEATER_BED);
|
||||
SERIAL_EOL();
|
||||
|
|
@ -1347,11 +1386,18 @@ void Temperature::manage_heater() {
|
|||
}
|
||||
#endif
|
||||
|
||||
#if EITHER(CHAMBER_FAN, CHAMBER_VENT) || DISABLED(PIDTEMPCHAMBER)
|
||||
static bool flag_chamber_excess_heat; // = false;
|
||||
#endif
|
||||
|
||||
#if EITHER(CHAMBER_FAN, CHAMBER_VENT)
|
||||
static bool flag_chamber_off; // = false
|
||||
|
||||
if (temp_chamber.target > CHAMBER_MINTEMP) {
|
||||
flag_chamber_off = false;
|
||||
|
||||
#if ENABLED(CHAMBER_FAN)
|
||||
int16_t fan_chamber_pwm;
|
||||
#if CHAMBER_FAN_MODE == 0
|
||||
fan_chamber_pwm = CHAMBER_FAN_BASE;
|
||||
#elif CHAMBER_FAN_MODE == 1
|
||||
|
|
@ -1376,7 +1422,8 @@ void Temperature::manage_heater() {
|
|||
// Open vent after MIN_COOLING_SLOPE_TIME_CHAMBER_VENT seconds if the
|
||||
// temperature didn't drop at least MIN_COOLING_SLOPE_DEG_CHAMBER_VENT
|
||||
if (next_cool_check_ms_2 == 0 || ELAPSED(ms, next_cool_check_ms_2)) {
|
||||
if (old_temp - temp_chamber.celsius < float(MIN_COOLING_SLOPE_DEG_CHAMBER_VENT)) flag_chamber_excess_heat = true; //the bed is heating the chamber too much
|
||||
if (temp_chamber.celsius - old_temp > MIN_COOLING_SLOPE_DEG_CHAMBER_VENT)
|
||||
flag_chamber_excess_heat = true; // the bed is heating the chamber too much
|
||||
next_cool_check_ms_2 = ms + SEC_TO_MS(MIN_COOLING_SLOPE_TIME_CHAMBER_VENT);
|
||||
old_temp = temp_chamber.celsius;
|
||||
}
|
||||
|
|
@ -1385,9 +1432,8 @@ void Temperature::manage_heater() {
|
|||
next_cool_check_ms_2 = 0;
|
||||
old_temp = 9999;
|
||||
}
|
||||
if (flag_chamber_excess_heat && (temp_chamber.celsius - temp_chamber.target <= -LOW_EXCESS_HEAT_LIMIT) ) {
|
||||
if (flag_chamber_excess_heat && (temp_chamber.target - temp_chamber.celsius >= LOW_EXCESS_HEAT_LIMIT))
|
||||
flag_chamber_excess_heat = false;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
else if (!flag_chamber_off) {
|
||||
|
|
@ -1402,17 +1448,14 @@ void Temperature::manage_heater() {
|
|||
}
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
|
||||
#if ENABLED(PIDTEMPCHAMBER)
|
||||
// PIDTEMPCHAMBER doens't support a CHAMBER_VENT yet.
|
||||
temp_chamber.soft_pwm_amount = WITHIN(temp_chamber.celsius, CHAMBER_MINTEMP, CHAMBER_MAXTEMP) ? (int)get_pid_output_chamber() >> 1 : 0;
|
||||
#else
|
||||
if (ELAPSED(ms, next_chamber_check_ms)) {
|
||||
next_chamber_check_ms = ms + CHAMBER_CHECK_INTERVAL;
|
||||
if (ELAPSED(ms, next_chamber_check_ms)) {
|
||||
next_chamber_check_ms = ms + CHAMBER_CHECK_INTERVAL;
|
||||
|
||||
if (WITHIN(temp_chamber.celsius, CHAMBER_MINTEMP, CHAMBER_MAXTEMP)) {
|
||||
if (WITHIN(temp_chamber.celsius, CHAMBER_MINTEMP, CHAMBER_MAXTEMP)) {
|
||||
if (flag_chamber_excess_heat) {
|
||||
temp_chamber.soft_pwm_amount = 0;
|
||||
#if ENABLED(CHAMBER_VENT)
|
||||
|
|
@ -1437,7 +1480,6 @@ void Temperature::manage_heater() {
|
|||
temp_chamber.soft_pwm_amount = 0;
|
||||
WRITE_HEATER_CHAMBER(LOW);
|
||||
}
|
||||
|
||||
}
|
||||
#if ENABLED(THERMAL_PROTECTION_CHAMBER)
|
||||
tr_state_machine[RUNAWAY_IND_CHAMBER].run(temp_chamber.celsius, temp_chamber.target, H_CHAMBER, THERMAL_PROTECTION_CHAMBER_PERIOD, THERMAL_PROTECTION_CHAMBER_HYSTERESIS);
|
||||
|
|
@ -1446,6 +1488,66 @@ void Temperature::manage_heater() {
|
|||
|
||||
#endif // HAS_HEATED_CHAMBER
|
||||
|
||||
#if HAS_COOLER
|
||||
|
||||
#ifndef COOLER_CHECK_INTERVAL
|
||||
#define COOLER_CHECK_INTERVAL 2000UL
|
||||
#endif
|
||||
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
if (degCooler() > COOLER_MAXTEMP) max_temp_error(H_COOLER);
|
||||
#endif
|
||||
|
||||
#if WATCH_COOLER
|
||||
// Make sure temperature is decreasing
|
||||
if (watch_cooler.elapsed(ms)) { // Time to check the cooler?
|
||||
if (degCooler() > watch_cooler.target) // Failed to decrease enough?
|
||||
_temp_error(H_COOLER, GET_TEXT(MSG_COOLING_FAILED), GET_TEXT(MSG_COOLING_FAILED));
|
||||
else
|
||||
start_watching_cooler(); // Start again if the target is still far off
|
||||
}
|
||||
#endif
|
||||
|
||||
static bool flag_cooler_state; // = false
|
||||
|
||||
if (cooler.is_enabled()) {
|
||||
flag_cooler_state = true; // used to allow M106 fan control when cooler is disabled
|
||||
if (temp_cooler.target == 0) temp_cooler.target = COOLER_MINTEMP;
|
||||
if (ELAPSED(ms, next_cooler_check_ms)) {
|
||||
next_cooler_check_ms = ms + COOLER_CHECK_INTERVAL;
|
||||
if (temp_cooler.celsius > temp_cooler.target) {
|
||||
temp_cooler.soft_pwm_amount = temp_cooler.celsius > temp_cooler.target ? MAX_COOLER_POWER : 0;
|
||||
flag_cooler_state = temp_cooler.soft_pwm_amount > 0 ? true : false; // used to allow M106 fan control when cooler is disabled
|
||||
#if ENABLED(COOLER_FAN)
|
||||
int16_t fan_cooler_pwm = (COOLER_FAN_BASE) + (COOLER_FAN_FACTOR) * ABS(temp_cooler.celsius - temp_cooler.target);
|
||||
NOMORE(fan_cooler_pwm, 255);
|
||||
set_fan_speed(COOLER_FAN_INDEX, fan_cooler_pwm); // Set cooler fan pwm
|
||||
cooler_fan_flush_ms = ms + 5000;
|
||||
#endif
|
||||
}
|
||||
else {
|
||||
temp_cooler.soft_pwm_amount = 0;
|
||||
#if ENABLED(COOLER_FAN)
|
||||
set_fan_speed(COOLER_FAN_INDEX, temp_cooler.celsius > temp_cooler.target - 2 ? COOLER_FAN_BASE : 0);
|
||||
#endif
|
||||
WRITE_HEATER_COOLER(LOW);
|
||||
}
|
||||
}
|
||||
}
|
||||
else {
|
||||
temp_cooler.soft_pwm_amount = 0;
|
||||
if (flag_cooler_state) {
|
||||
flag_cooler_state = false;
|
||||
thermalManager.set_fan_speed(COOLER_FAN_INDEX, 0);
|
||||
}
|
||||
WRITE_HEATER_COOLER(LOW);
|
||||
}
|
||||
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
tr_state_machine[RUNAWAY_IND_COOLER].run(temp_cooler.celsius, temp_cooler.target, H_COOLER, THERMAL_PROTECTION_COOLER_PERIOD, THERMAL_PROTECTION_COOLER_HYSTERESIS);
|
||||
#endif
|
||||
#endif // HAS_COOLER
|
||||
|
||||
UNUSED(ms);
|
||||
}
|
||||
|
||||
|
|
@ -1510,6 +1612,9 @@ void Temperature::manage_heater() {
|
|||
#if TEMP_SENSOR_CHAMBER_IS_CUSTOM
|
||||
{ true, 0, 0, CHAMBER_PULLUP_RESISTOR_OHMS, CHAMBER_RESISTANCE_25C_OHMS, 0, 0, CHAMBER_BETA, 0 }
|
||||
#endif
|
||||
#if TEMP_SENSOR_COOLER_IS_CUSTOM
|
||||
{ true, 0, 0, COOLER_PULLUP_RESISTOR_OHMS, COOLER_RESISTANCE_25C_OHMS, 0, 0, COOLER_BETA, 0 }
|
||||
#endif
|
||||
#if TEMP_SENSOR_PROBE_IS_CUSTOM
|
||||
{ true, 0, 0, PROBE_PULLUP_RESISTOR_OHMS, PROBE_RESISTANCE_25C_OHMS, 0, 0, PROBE_BETA, 0 }
|
||||
#endif
|
||||
|
|
@ -1543,6 +1648,7 @@ void Temperature::manage_heater() {
|
|||
TERN_(TEMP_SENSOR_7_IS_CUSTOM, t_index == CTI_HOTEND_7 ? PSTR("HOTEND 7") :)
|
||||
TERN_(TEMP_SENSOR_BED_IS_CUSTOM, t_index == CTI_BED ? PSTR("BED") :)
|
||||
TERN_(TEMP_SENSOR_CHAMBER_IS_CUSTOM, t_index == CTI_CHAMBER ? PSTR("CHAMBER") :)
|
||||
TERN_(TEMP_SENSOR_COOLER_IS_CUSTOM, t_index == CTI_COOLER ? PSTR("COOLER") :)
|
||||
TERN_(TEMP_SENSOR_PROBE_IS_CUSTOM, t_index == CTI_PROBE ? PSTR("PROBE") :)
|
||||
nullptr
|
||||
);
|
||||
|
|
@ -1706,7 +1812,6 @@ void Temperature::manage_heater() {
|
|||
#endif // HAS_HOTEND
|
||||
|
||||
#if HAS_HEATED_BED
|
||||
// Derived from RepRap FiveD extruder::getTemperature()
|
||||
// For bed temperature measurement.
|
||||
float Temperature::analog_to_celsius_bed(const int raw) {
|
||||
#if TEMP_SENSOR_BED_IS_CUSTOM
|
||||
|
|
@ -1725,7 +1830,6 @@ void Temperature::manage_heater() {
|
|||
#endif // HAS_HEATED_BED
|
||||
|
||||
#if HAS_TEMP_CHAMBER
|
||||
// Derived from RepRap FiveD extruder::getTemperature()
|
||||
// For chamber temperature measurement.
|
||||
float Temperature::analog_to_celsius_chamber(const int raw) {
|
||||
#if TEMP_SENSOR_CHAMBER_IS_CUSTOM
|
||||
|
|
@ -1743,8 +1847,25 @@ void Temperature::manage_heater() {
|
|||
}
|
||||
#endif // HAS_TEMP_CHAMBER
|
||||
|
||||
#if HAS_TEMP_COOLER
|
||||
// For cooler temperature measurement.
|
||||
float Temperature::analog_to_celsius_cooler(const int raw) {
|
||||
#if TEMP_SENSOR_COOLER_IS_CUSTOM
|
||||
return user_thermistor_to_deg_c(CTI_COOLER, raw);
|
||||
#elif TEMP_SENSOR_COOLER_IS_THERMISTOR
|
||||
SCAN_THERMISTOR_TABLE(TEMPTABLE_COOLER, TEMPTABLE_COOLER_LEN);
|
||||
#elif TEMP_SENSOR_COOLER_IS_AD595
|
||||
return TEMP_AD595(raw);
|
||||
#elif TEMP_SENSOR_COOLER_IS_AD8495
|
||||
return TEMP_AD8495(raw);
|
||||
#else
|
||||
UNUSED(raw);
|
||||
return 0;
|
||||
#endif
|
||||
}
|
||||
#endif // HAS_TEMP_COOLER
|
||||
|
||||
#if HAS_TEMP_PROBE
|
||||
// Derived from RepRap FiveD extruder::getTemperature()
|
||||
// For probe temperature measurement.
|
||||
float Temperature::analog_to_celsius_probe(const int raw) {
|
||||
#if TEMP_SENSOR_PROBE_IS_CUSTOM
|
||||
|
|
@ -1776,6 +1897,7 @@ void Temperature::updateTemperaturesFromRawValues() {
|
|||
#endif
|
||||
TERN_(HAS_HEATED_BED, temp_bed.celsius = analog_to_celsius_bed(temp_bed.raw));
|
||||
TERN_(HAS_TEMP_CHAMBER, temp_chamber.celsius = analog_to_celsius_chamber(temp_chamber.raw));
|
||||
TERN_(HAS_TEMP_COOLER, temp_cooler.celsius = analog_to_celsius_cooler(temp_cooler.raw));
|
||||
TERN_(HAS_TEMP_PROBE, temp_probe.celsius = analog_to_celsius_probe(temp_probe.raw));
|
||||
TERN_(TEMP_SENSOR_1_AS_REDUNDANT, redundant_temperature = analog_to_celsius_hotend(redundant_temperature_raw, 1));
|
||||
TERN_(FILAMENT_WIDTH_SENSOR, filwidth.update_measured_mm());
|
||||
|
|
@ -1927,6 +2049,10 @@ void Temperature::init() {
|
|||
OUT_WRITE(HEATER_CHAMBER_PIN, HEATER_CHAMBER_INVERTING);
|
||||
#endif
|
||||
|
||||
#if HAS_COOLER
|
||||
OUT_WRITE(COOLER_PIN, COOLER_INVERTING);
|
||||
#endif
|
||||
|
||||
#if HAS_FAN0
|
||||
INIT_FAN_PIN(FAN_PIN);
|
||||
#endif
|
||||
|
|
@ -2001,6 +2127,9 @@ void Temperature::init() {
|
|||
#if HAS_TEMP_ADC_CHAMBER
|
||||
HAL_ANALOG_SELECT(TEMP_CHAMBER_PIN);
|
||||
#endif
|
||||
#if HAS_TEMP_ADC_COOLER
|
||||
HAL_ANALOG_SELECT(TEMP_COOLER_PIN);
|
||||
#endif
|
||||
#if HAS_TEMP_ADC_PROBE
|
||||
HAL_ANALOG_SELECT(TEMP_PROBE_PIN);
|
||||
#endif
|
||||
|
|
@ -2137,6 +2266,15 @@ void Temperature::init() {
|
|||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_COOLER
|
||||
#ifdef COOLER_MINTEMP
|
||||
while (analog_to_celsius_cooler(mintemp_raw_COOLER) > COOLER_MINTEMP) mintemp_raw_COOLER += TEMPDIR(COOLER) * (OVERSAMPLENR);
|
||||
#endif
|
||||
#ifdef COOLER_MAXTEMP
|
||||
while (analog_to_celsius_cooler(maxtemp_raw_COOLER) < COOLER_MAXTEMP) maxtemp_raw_COOLER -= TEMPDIR(COOLER) * (OVERSAMPLENR);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
TERN_(PROBING_HEATERS_OFF, paused = false);
|
||||
}
|
||||
|
||||
|
|
@ -2174,6 +2312,17 @@ void Temperature::init() {
|
|||
}
|
||||
#endif
|
||||
|
||||
#if WATCH_COOLER
|
||||
/**
|
||||
* Start Cooling Sanity Check for cooler that is above
|
||||
* its target temperature by a configurable margin.
|
||||
* This is called when the temperature is set. (M143, M193)
|
||||
*/
|
||||
void Temperature::start_watching_cooler() {
|
||||
watch_cooler.restart(degCooler(), degTargetCooler());
|
||||
}
|
||||
#endif
|
||||
|
||||
#if HAS_THERMAL_PROTECTION
|
||||
|
||||
Temperature::tr_state_machine_t Temperature::tr_state_machine[NR_HEATER_RUNAWAY]; // = { { TRInactive, 0 } };
|
||||
|
|
@ -2301,10 +2450,18 @@ void Temperature::disable_all_heaters() {
|
|||
temp_chamber.soft_pwm_amount = 0;
|
||||
WRITE_HEATER_CHAMBER(LOW);
|
||||
#endif
|
||||
|
||||
#if HAS_COOLER
|
||||
setTargetCooler(0);
|
||||
temp_cooler.soft_pwm_amount = 0;
|
||||
WRITE_HEATER_COOLER(LOW);
|
||||
#endif
|
||||
}
|
||||
|
||||
#if ENABLED(PRINTJOB_TIMER_AUTOSTART)
|
||||
|
||||
#include "printcounter.h"
|
||||
|
||||
bool Temperature::auto_job_over_threshold() {
|
||||
#if HAS_HOTEND
|
||||
HOTEND_LOOP() if (degTargetHotend(e) > (EXTRUDE_MINTEMP) / 2) return true;
|
||||
|
|
@ -2564,6 +2721,7 @@ void Temperature::update_raw_temperatures() {
|
|||
TERN_(HAS_TEMP_ADC_BED, temp_bed.update());
|
||||
TERN_(HAS_TEMP_ADC_CHAMBER, temp_chamber.update());
|
||||
TERN_(HAS_TEMP_ADC_PROBE, temp_probe.update());
|
||||
TERN_(HAS_TEMP_ADC_COOLER, temp_cooler.update());
|
||||
|
||||
TERN_(HAS_JOY_ADC_X, joystick.x.update());
|
||||
TERN_(HAS_JOY_ADC_Y, joystick.y.update());
|
||||
|
|
@ -2588,6 +2746,7 @@ void Temperature::readings_ready() {
|
|||
TERN_(HAS_HEATED_BED, temp_bed.reset());
|
||||
TERN_(HAS_TEMP_CHAMBER, temp_chamber.reset());
|
||||
TERN_(HAS_TEMP_PROBE, temp_probe.reset());
|
||||
TERN_(HAS_TEMP_COOLER, temp_cooler.reset());
|
||||
|
||||
TERN_(HAS_JOY_ADC_X, joystick.x.reset());
|
||||
TERN_(HAS_JOY_ADC_Y, joystick.y.reset());
|
||||
|
|
@ -2650,6 +2809,18 @@ void Temperature::readings_ready() {
|
|||
if (CHAMBERCMP(temp_chamber.raw, maxtemp_raw_CHAMBER)) max_temp_error(H_CHAMBER);
|
||||
if (chamber_on && CHAMBERCMP(mintemp_raw_CHAMBER, temp_chamber.raw)) min_temp_error(H_CHAMBER);
|
||||
#endif
|
||||
|
||||
#if BOTH(HAS_COOLER, THERMAL_PROTECTION_COOLER)
|
||||
#if TEMPDIR(COOLER) < 0
|
||||
#define COOLERCMP(A,B) ((A)<(B))
|
||||
#else
|
||||
#define COOLERCMP(A,B) ((A)>(B))
|
||||
#endif
|
||||
if (cutter.unitPower > 0) {
|
||||
if (COOLERCMP(temp_cooler.raw, maxtemp_raw_COOLER)) max_temp_error(H_COOLER);
|
||||
}
|
||||
if (COOLERCMP(mintemp_raw_COOLER, temp_cooler.raw)) min_temp_error(H_COOLER);
|
||||
#endif
|
||||
}
|
||||
|
||||
/**
|
||||
|
|
@ -2735,11 +2906,15 @@ void Temperature::tick() {
|
|||
static SoftPWM soft_pwm_chamber;
|
||||
#endif
|
||||
|
||||
#if HAS_COOLER
|
||||
static SoftPWM soft_pwm_cooler;
|
||||
#endif
|
||||
|
||||
#define WRITE_FAN(n, v) WRITE(FAN##n##_PIN, (v) ^ FAN_INVERTING)
|
||||
|
||||
#if DISABLED(SLOW_PWM_HEATERS)
|
||||
|
||||
#if ANY(HAS_HOTEND, HAS_HEATED_BED, HAS_HEATED_CHAMBER, FAN_SOFT_PWM)
|
||||
#if ANY(HAS_HOTEND, HAS_HEATED_BED, HAS_HEATED_CHAMBER, HAS_COOLER, FAN_SOFT_PWM)
|
||||
constexpr uint8_t pwm_mask = TERN0(SOFT_PWM_DITHER, _BV(SOFT_PWM_SCALE) - 1);
|
||||
#define _PWM_MOD(N,S,T) do{ \
|
||||
const bool on = S.add(pwm_mask, T.soft_pwm_amount); \
|
||||
|
|
@ -2766,6 +2941,10 @@ void Temperature::tick() {
|
|||
_PWM_MOD(CHAMBER,soft_pwm_chamber,temp_chamber);
|
||||
#endif
|
||||
|
||||
#if HAS_COOLER
|
||||
_PWM_MOD(COOLER,soft_pwm_cooler,temp_cooler);
|
||||
#endif
|
||||
|
||||
#if ENABLED(FAN_SOFT_PWM)
|
||||
#define _FAN_PWM(N) do{ \
|
||||
uint8_t &spcf = soft_pwm_count_fan[N]; \
|
||||
|
|
@ -2813,6 +2992,10 @@ void Temperature::tick() {
|
|||
_PWM_LOW(CHAMBER, soft_pwm_chamber);
|
||||
#endif
|
||||
|
||||
#if HAS_COOLER
|
||||
_PWM_LOW(COOLER, soft_pwm_cooler);
|
||||
#endif
|
||||
|
||||
#if ENABLED(FAN_SOFT_PWM)
|
||||
#if HAS_FAN0
|
||||
if (soft_pwm_count_fan[0] <= pwm_count_tmp) WRITE_FAN(0, LOW);
|
||||
|
|
@ -2879,6 +3062,10 @@ void Temperature::tick() {
|
|||
_SLOW_PWM(CHAMBER, soft_pwm_chamber, temp_chamber);
|
||||
#endif
|
||||
|
||||
#if HAS_COOLER
|
||||
_SLOW_PWM(COOLER, soft_pwm_cooler, temp_cooler);
|
||||
#endif
|
||||
|
||||
} // slow_pwm_count == 0
|
||||
|
||||
#if HAS_HOTEND
|
||||
|
|
@ -2894,6 +3081,10 @@ void Temperature::tick() {
|
|||
_PWM_OFF(CHAMBER, soft_pwm_chamber);
|
||||
#endif
|
||||
|
||||
#if HAS_COOLER
|
||||
_PWM_OFF(COOLER, soft_pwm_cooler, temp_cooler);
|
||||
#endif
|
||||
|
||||
#if ENABLED(FAN_SOFT_PWM)
|
||||
if (pwm_count_tmp >= 127) {
|
||||
pwm_count_tmp = 0;
|
||||
|
|
@ -2973,6 +3164,7 @@ void Temperature::tick() {
|
|||
#endif
|
||||
TERN_(HAS_HEATED_BED, soft_pwm_bed.dec());
|
||||
TERN_(HAS_HEATED_CHAMBER, soft_pwm_chamber.dec());
|
||||
TERN_(HAS_COOLER, soft_pwm_cooler.dec());
|
||||
}
|
||||
|
||||
#endif // SLOW_PWM_HEATERS
|
||||
|
|
@ -3040,6 +3232,11 @@ void Temperature::tick() {
|
|||
case MeasureTemp_CHAMBER: ACCUMULATE_ADC(temp_chamber); break;
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_ADC_COOLER
|
||||
case PrepareTemp_COOLER: HAL_START_ADC(TEMP_COOLER_PIN); break;
|
||||
case MeasureTemp_COOLER: ACCUMULATE_ADC(temp_cooler); break;
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_ADC_PROBE
|
||||
case PrepareTemp_PROBE: HAL_START_ADC(TEMP_PROBE_PIN); break;
|
||||
case MeasureTemp_PROBE: ACCUMULATE_ADC(temp_probe); break;
|
||||
|
|
@ -3183,22 +3380,24 @@ void Temperature::tick() {
|
|||
) {
|
||||
char k;
|
||||
switch (e) {
|
||||
default:
|
||||
#if HAS_TEMP_HOTEND
|
||||
k = 'T'; break;
|
||||
#endif
|
||||
#if HAS_TEMP_BED
|
||||
case H_BED: k = 'B'; break;
|
||||
#endif
|
||||
#if HAS_TEMP_CHAMBER
|
||||
case H_CHAMBER: k = 'C'; break;
|
||||
#endif
|
||||
#if HAS_TEMP_PROBE
|
||||
case H_PROBE: k = 'P'; break;
|
||||
#endif
|
||||
#if HAS_TEMP_HOTEND
|
||||
default: k = 'T'; break;
|
||||
#if HAS_HEATED_BED
|
||||
case H_BED: k = 'B'; break;
|
||||
#endif
|
||||
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
|
||||
case H_REDUNDANT: k = 'R'; break;
|
||||
#endif
|
||||
#elif HAS_HEATED_BED
|
||||
default: k = 'B'; break;
|
||||
#if HAS_TEMP_COOLER
|
||||
case H_COOLER: k = 'L'; break;
|
||||
#endif
|
||||
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
|
||||
case H_REDUNDANT: k = 'R'; break;
|
||||
#endif
|
||||
}
|
||||
SERIAL_CHAR(' ', k);
|
||||
|
|
@ -3251,18 +3450,21 @@ void Temperature::tick() {
|
|||
);
|
||||
#endif
|
||||
#if HAS_TEMP_CHAMBER
|
||||
print_heater_state(degChamber()
|
||||
#if HAS_HEATED_CHAMBER
|
||||
, degTargetChamber()
|
||||
#else
|
||||
, 0
|
||||
#endif
|
||||
print_heater_state(degChamber(), TERN0(HAS_HEATED_CHAMBER, degTargetChamber())
|
||||
#if ENABLED(SHOW_TEMP_ADC_VALUES)
|
||||
, rawChamberTemp()
|
||||
#endif
|
||||
, H_CHAMBER
|
||||
);
|
||||
#endif
|
||||
#endif // HAS_TEMP_CHAMBER
|
||||
#if HAS_TEMP_COOLER
|
||||
print_heater_state(degCooler(), TERN0(HAS_COOLER, degTargetCooler())
|
||||
#if ENABLED(SHOW_TEMP_ADC_VALUES)
|
||||
, rawCoolerTemp()
|
||||
#endif
|
||||
, H_COOLER
|
||||
);
|
||||
#endif // HAS_TEMP_COOLER
|
||||
#if HAS_TEMP_PROBE
|
||||
print_heater_state(degProbe(), 0
|
||||
#if ENABLED(SHOW_TEMP_ADC_VALUES)
|
||||
|
|
@ -3286,6 +3488,9 @@ void Temperature::tick() {
|
|||
#if HAS_HEATED_CHAMBER
|
||||
SERIAL_ECHOPAIR(" C@:", getHeaterPower(H_CHAMBER));
|
||||
#endif
|
||||
#if HAS_COOLER
|
||||
SERIAL_ECHOPAIR(" C@:", getHeaterPower(H_COOLER));
|
||||
#endif
|
||||
#if HAS_MULTI_HOTEND
|
||||
HOTEND_LOOP() {
|
||||
SERIAL_ECHOPAIR(" @", e);
|
||||
|
|
@ -3759,4 +3964,103 @@ void Temperature::tick() {
|
|||
|
||||
#endif // HAS_HEATED_CHAMBER
|
||||
|
||||
#if HAS_COOLER
|
||||
|
||||
#ifndef MIN_COOLING_SLOPE_DEG_COOLER
|
||||
#define MIN_COOLING_SLOPE_DEG_COOLER 1.50
|
||||
#endif
|
||||
#ifndef MIN_COOLING_SLOPE_TIME_COOLER
|
||||
#define MIN_COOLING_SLOPE_TIME_COOLER 120
|
||||
#endif
|
||||
|
||||
bool Temperature::wait_for_cooler(const bool no_wait_for_cooling/*=true*/) {
|
||||
|
||||
#if TEMP_COOLER_RESIDENCY_TIME > 0
|
||||
millis_t residency_start_ms = 0;
|
||||
bool first_loop = true;
|
||||
// Loop until the temperature has stabilized
|
||||
#define TEMP_COOLER_CONDITIONS (!residency_start_ms || PENDING(now, residency_start_ms + SEC_TO_MS(TEMP_COOLER_RESIDENCY_TIME)))
|
||||
#else
|
||||
// Loop until the temperature is very close target
|
||||
#define TEMP_COOLER_CONDITIONS (wants_to_cool ? isLaserHeating() : isLaserCooling())
|
||||
#endif
|
||||
|
||||
#if DISABLED(BUSY_WHILE_HEATING) && ENABLED(HOST_KEEPALIVE_FEATURE)
|
||||
KEEPALIVE_STATE(NOT_BUSY);
|
||||
#endif
|
||||
|
||||
bool wants_to_cool = false;
|
||||
float target_temp = -1, previous_temp = 9999;
|
||||
millis_t now, next_temp_ms = 0, next_cooling_check_ms = 0;
|
||||
wait_for_heatup = true;
|
||||
do {
|
||||
// Target temperature might be changed during the loop
|
||||
if (target_temp != degTargetCooler()) {
|
||||
wants_to_cool = isLaserHeating();
|
||||
target_temp = degTargetCooler();
|
||||
|
||||
// Exit if S<lower>, continue if S<higher>, R<lower>, or R<higher>
|
||||
if (no_wait_for_cooling && wants_to_cool) break;
|
||||
}
|
||||
|
||||
now = millis();
|
||||
if (ELAPSED(now, next_temp_ms)) { // Print Temp Reading every 1 second while heating up.
|
||||
next_temp_ms = now + 1000UL;
|
||||
print_heater_states(active_extruder);
|
||||
#if TEMP_COOLER_RESIDENCY_TIME > 0
|
||||
SERIAL_ECHOPGM(" W:");
|
||||
if (residency_start_ms)
|
||||
SERIAL_ECHO(long((SEC_TO_MS(TEMP_COOLER_RESIDENCY_TIME) - (now - residency_start_ms)) / 1000UL));
|
||||
else
|
||||
SERIAL_CHAR('?');
|
||||
#endif
|
||||
SERIAL_EOL();
|
||||
}
|
||||
|
||||
idle();
|
||||
gcode.reset_stepper_timeout(); // Keep steppers powered
|
||||
|
||||
const float current_temp = degCooler();
|
||||
|
||||
#if TEMP_COOLER_RESIDENCY_TIME > 0
|
||||
|
||||
const float temp_diff = ABS(target_temp - temp);
|
||||
|
||||
if (!residency_start_ms) {
|
||||
// Start the TEMP_COOLER_RESIDENCY_TIME timer when we reach target temp for the first time.
|
||||
if (temp_diff < TEMP_COOLER_WINDOW)
|
||||
residency_start_ms = now + (first_loop ? SEC_TO_MS(TEMP_COOLER_RESIDENCY_TIME) / 3 : 0);
|
||||
}
|
||||
else if (temp_diff > TEMP_COOLER_HYSTERESIS) {
|
||||
// Restart the timer whenever the temperature falls outside the hysteresis.
|
||||
residency_start_ms = now;
|
||||
}
|
||||
|
||||
first_loop = false;
|
||||
#endif // TEMP_COOLER_RESIDENCY_TIME > 0
|
||||
|
||||
if (wants_to_cool) {
|
||||
// Break after MIN_COOLING_SLOPE_TIME_CHAMBER seconds
|
||||
// if the temperature did not drop at least MIN_COOLING_SLOPE_DEG_CHAMBER
|
||||
if (!next_cooling_check_ms || ELAPSED(now, next_cooling_check_ms)) {
|
||||
if (previous_temp - current_temp < float(MIN_COOLING_SLOPE_DEG_COOLER)) break;
|
||||
next_cooling_check_ms = now + SEC_TO_MS(MIN_COOLING_SLOPE_TIME_COOLER);
|
||||
previous_temp = current_temp;
|
||||
}
|
||||
}
|
||||
|
||||
} while (wait_for_heatup && TEMP_COOLER_CONDITIONS);
|
||||
|
||||
// Prevent a wait-forever situation if R is misused i.e. M191 R0
|
||||
if (wait_for_heatup) {
|
||||
wait_for_heatup = false;
|
||||
ui.reset_status();
|
||||
return true;
|
||||
}
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
#endif // HAS_COOLER
|
||||
|
||||
#endif // HAS_TEMP_SENSOR
|
||||
|
|
|
|||
|
|
@ -44,10 +44,10 @@
|
|||
#define HOTEND_INDEX TERN(HAS_MULTI_HOTEND, e, 0)
|
||||
#define E_NAME TERN_(HAS_MULTI_HOTEND, e)
|
||||
|
||||
// Heater identifiers. Positive values are hotends. Negative values are other heaters.
|
||||
// Element identifiers. Positive values are hotends. Negative values are other heaters or coolers.
|
||||
typedef enum : int8_t {
|
||||
INDEX_NONE = -5,
|
||||
H_PROBE, H_REDUNDANT, H_CHAMBER, H_BED,
|
||||
INDEX_NONE = -6,
|
||||
H_COOLER, H_PROBE, H_REDUNDANT, H_CHAMBER, H_BED,
|
||||
H_E0, H_E1, H_E2, H_E3, H_E4, H_E5, H_E6, H_E7
|
||||
} heater_id_t;
|
||||
|
||||
|
|
@ -99,6 +99,9 @@ enum ADCSensorState : char {
|
|||
#if HAS_TEMP_ADC_CHAMBER
|
||||
PrepareTemp_CHAMBER, MeasureTemp_CHAMBER,
|
||||
#endif
|
||||
#if HAS_TEMP_ADC_COOLER
|
||||
PrepareTemp_COOLER, MeasureTemp_COOLER,
|
||||
#endif
|
||||
#if HAS_TEMP_ADC_PROBE
|
||||
PrepareTemp_PROBE, MeasureTemp_PROBE,
|
||||
#endif
|
||||
|
|
@ -218,6 +221,9 @@ struct PIDHeaterInfo : public HeaterInfo {
|
|||
#elif HAS_TEMP_CHAMBER
|
||||
typedef temp_info_t chamber_info_t;
|
||||
#endif
|
||||
#if EITHER(HAS_COOLER, HAS_TEMP_COOLER)
|
||||
typedef heater_info_t cooler_info_t;
|
||||
#endif
|
||||
|
||||
// Heater watch handling
|
||||
template <int INCREASE, int HYSTERESIS, millis_t PERIOD>
|
||||
|
|
@ -249,6 +255,9 @@ struct HeaterWatch {
|
|||
#if WATCH_CHAMBER
|
||||
typedef struct HeaterWatch<WATCH_CHAMBER_TEMP_INCREASE, TEMP_CHAMBER_HYSTERESIS, WATCH_CHAMBER_TEMP_PERIOD> chamber_watch_t;
|
||||
#endif
|
||||
#if WATCH_COOLER
|
||||
typedef struct HeaterWatch<WATCH_COOLER_TEMP_INCREASE, TEMP_COOLER_HYSTERESIS, WATCH_COOLER_TEMP_PERIOD> cooler_watch_t;
|
||||
#endif
|
||||
|
||||
// Temperature sensor read value ranges
|
||||
typedef struct { int16_t raw_min, raw_max; } raw_range_t;
|
||||
|
|
@ -288,6 +297,9 @@ typedef struct { int16_t raw_min, raw_max, mintemp, maxtemp; } temp_range_t;
|
|||
#if TEMP_SENSOR_CHAMBER_IS_CUSTOM
|
||||
CTI_CHAMBER,
|
||||
#endif
|
||||
#if COOLER_USER_THERMISTOR
|
||||
CTI_COOLER,
|
||||
#endif
|
||||
USER_THERMISTORS
|
||||
};
|
||||
|
||||
|
|
@ -316,9 +328,11 @@ class Temperature {
|
|||
TERN_(HAS_HEATED_BED, static bed_info_t temp_bed);
|
||||
TERN_(HAS_TEMP_PROBE, static probe_info_t temp_probe);
|
||||
TERN_(HAS_TEMP_CHAMBER, static chamber_info_t temp_chamber);
|
||||
TERN_(HAS_TEMP_COOLER, static cooler_info_t temp_cooler);
|
||||
|
||||
TERN_(AUTO_POWER_E_FANS, static uint8_t autofan_speed[HOTENDS]);
|
||||
TERN_(AUTO_POWER_CHAMBER_FAN, static uint8_t chamberfan_speed);
|
||||
TERN_(AUTO_POWER_COOLER_FAN, static uint8_t coolerfan_speed);
|
||||
|
||||
#if ENABLED(FAN_SOFT_PWM)
|
||||
static uint8_t soft_pwm_amount_fan[FAN_COUNT],
|
||||
|
|
@ -428,6 +442,17 @@ class Temperature {
|
|||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_COOLER
|
||||
TERN_(WATCH_COOLER, static cooler_watch_t watch_cooler);
|
||||
static millis_t next_cooler_check_ms, cooler_fan_flush_ms;
|
||||
#ifdef COOLER_MINTEMP
|
||||
static int16_t mintemp_raw_COOLER;
|
||||
#endif
|
||||
#ifdef COOLER_MAXTEMP
|
||||
static int16_t maxtemp_raw_COOLER;
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifdef MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED
|
||||
static uint8_t consecutive_low_temperature_error[HOTENDS];
|
||||
#endif
|
||||
|
|
@ -492,7 +517,6 @@ class Temperature {
|
|||
#if HAS_HOTEND
|
||||
static float analog_to_celsius_hotend(const int raw, const uint8_t e);
|
||||
#endif
|
||||
|
||||
#if HAS_HEATED_BED
|
||||
static float analog_to_celsius_bed(const int raw);
|
||||
#endif
|
||||
|
|
@ -502,6 +526,9 @@ class Temperature {
|
|||
#if HAS_TEMP_CHAMBER
|
||||
static float analog_to_celsius_chamber(const int raw);
|
||||
#endif
|
||||
#if HAS_TEMP_COOLER
|
||||
static float analog_to_celsius_cooler(const int raw);
|
||||
#endif
|
||||
|
||||
#if HAS_FAN
|
||||
|
||||
|
|
@ -737,6 +764,38 @@ class Temperature {
|
|||
}
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_COOLER
|
||||
#if ENABLED(SHOW_TEMP_ADC_VALUES)
|
||||
FORCE_INLINE static int16_t rawCoolerTemp() { return temp_cooler.raw; }
|
||||
#endif
|
||||
FORCE_INLINE static float degCooler() { return temp_cooler.celsius; }
|
||||
#if HAS_COOLER
|
||||
FORCE_INLINE static int16_t degTargetCooler() { return temp_cooler.target; }
|
||||
FORCE_INLINE static bool isLaserHeating() { return temp_cooler.target > temp_cooler.celsius; }
|
||||
FORCE_INLINE static bool isLaserCooling() { return temp_cooler.target < temp_cooler.celsius; }
|
||||
static bool wait_for_cooler(const bool no_wait_for_cooling=true);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if WATCH_COOLER
|
||||
static void start_watching_cooler();
|
||||
#else
|
||||
static inline void start_watching_cooler() {}
|
||||
#endif
|
||||
|
||||
#if HAS_COOLER
|
||||
static void setTargetCooler(const int16_t celsius) {
|
||||
temp_cooler.target =
|
||||
#ifdef COOLER_MAXTEMP
|
||||
_MIN(celsius, COOLER_MAXTEMP - 10)
|
||||
#else
|
||||
celsius
|
||||
#endif
|
||||
;
|
||||
start_watching_cooler();
|
||||
}
|
||||
#endif
|
||||
|
||||
/**
|
||||
* The software PWM power for a heater
|
||||
*/
|
||||
|
|
@ -847,7 +906,7 @@ class Temperature {
|
|||
static void min_temp_error(const heater_id_t e);
|
||||
static void max_temp_error(const heater_id_t e);
|
||||
|
||||
#define HAS_THERMAL_PROTECTION ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_CHAMBER, HAS_THERMALLY_PROTECTED_BED)
|
||||
#define HAS_THERMAL_PROTECTION ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_CHAMBER, HAS_THERMALLY_PROTECTED_BED, THERMAL_PROTECTION_COOLER)
|
||||
|
||||
#if HAS_THERMAL_PROTECTION
|
||||
|
||||
|
|
@ -863,6 +922,9 @@ class Temperature {
|
|||
#if ENABLED(THERMAL_PROTECTION_CHAMBER)
|
||||
RUNAWAY_IND_CHAMBER,
|
||||
#endif
|
||||
#if ENABLED(THERMAL_PROTECTION_COOLER)
|
||||
RUNAWAY_IND_COOLER,
|
||||
#endif
|
||||
NR_HEATER_RUNAWAY
|
||||
};
|
||||
#undef _ENUM_FOR_E
|
||||
|
|
@ -872,6 +934,9 @@ class Temperature {
|
|||
#if HAS_THERMALLY_PROTECTED_CHAMBER
|
||||
if (heater_id == H_CHAMBER) return RUNAWAY_IND_CHAMBER;
|
||||
#endif
|
||||
#if HAS_THERMALLY_PROTECTED_CHAMBER
|
||||
if (heater_id == H_COOLER) return RUNAWAY_IND_COOLER;
|
||||
#endif
|
||||
#if HAS_THERMALLY_PROTECTED_BED
|
||||
if (heater_id == H_BED) return RUNAWAY_IND_BED;
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -42,7 +42,7 @@
|
|||
#define OV_SCALE(N) (N)
|
||||
#define OV(N) int16_t(OV_SCALE(N) * (OVERSAMPLENR) * (THERMISTOR_TABLE_SCALE))
|
||||
|
||||
#define ANY_THERMISTOR_IS(n) (TEMP_SENSOR_0_THERMISTOR_ID == n || TEMP_SENSOR_1_THERMISTOR_ID == n || TEMP_SENSOR_2_THERMISTOR_ID == n || TEMP_SENSOR_3_THERMISTOR_ID == n || TEMP_SENSOR_4_THERMISTOR_ID == n || TEMP_SENSOR_5_THERMISTOR_ID == n || TEMP_SENSOR_6_THERMISTOR_ID == n || TEMP_SENSOR_7_THERMISTOR_ID == n || TEMP_SENSOR_BED_THERMISTOR_ID == n || TEMP_SENSOR_CHAMBER_THERMISTOR_ID == n || TEMP_SENSOR_PROBE_THERMISTOR_ID == n)
|
||||
#define ANY_THERMISTOR_IS(n) (TEMP_SENSOR_0_THERMISTOR_ID == n || TEMP_SENSOR_1_THERMISTOR_ID == n || TEMP_SENSOR_2_THERMISTOR_ID == n || TEMP_SENSOR_3_THERMISTOR_ID == n || TEMP_SENSOR_4_THERMISTOR_ID == n || TEMP_SENSOR_5_THERMISTOR_ID == n || TEMP_SENSOR_6_THERMISTOR_ID == n || TEMP_SENSOR_7_THERMISTOR_ID == n || TEMP_SENSOR_BED_THERMISTOR_ID == n || TEMP_SENSOR_CHAMBER_THERMISTOR_ID == n || TEMP_SENSOR_COOLER_THERMISTOR_ID == n || TEMP_SENSOR_PROBE_THERMISTOR_ID == n)
|
||||
|
||||
typedef struct { int16_t value, celsius; } temp_entry_t;
|
||||
|
||||
|
|
@ -303,6 +303,14 @@ typedef struct { int16_t value, celsius; } temp_entry_t;
|
|||
#define TEMPTABLE_CHAMBER_LEN 0
|
||||
#endif
|
||||
|
||||
#ifdef TEMP_SENSOR_COOLER_THERMISTOR_ID
|
||||
#define TEMPTABLE_COOLER TT_NAME(TEMP_SENSOR_COOLER_THERMISTOR_ID)
|
||||
#define TEMPTABLE_COOLER_LEN COUNT(TEMPTABLE_COOLER)
|
||||
#elif TEMP_SENSOR_COOLER_IS_THERMISTOR
|
||||
#error "No cooler thermistor table specified"
|
||||
#else
|
||||
#define TEMPTABLE_COOLER_LEN 0
|
||||
#endif
|
||||
#ifdef TEMP_SENSOR_PROBE_THERMISTOR_ID
|
||||
#define TEMPTABLE_PROBE TT_NAME(TEMP_SENSOR_PROBE_THERMISTOR_ID)
|
||||
#define TEMPTABLE_PROBE_LEN COUNT(TEMPTABLE_PROBE)
|
||||
|
|
@ -319,7 +327,7 @@ static_assert(
|
|||
&& TEMPTABLE_4_LEN < 256 && TEMPTABLE_5_LEN < 256
|
||||
&& TEMPTABLE_6_LEN < 256 && TEMPTABLE_7_LEN < 256
|
||||
&& TEMPTABLE_BED_LEN < 256 && TEMPTABLE_CHAMBER_LEN < 256
|
||||
&& TEMPTABLE_PROBE_LEN < 256,
|
||||
&& TEMPTABLE_COOLER_LEN < 256 && TEMPTABLE_PROBE_LEN < 256,
|
||||
"Temperature conversion tables over 255 entries need special consideration."
|
||||
);
|
||||
|
||||
|
|
@ -495,6 +503,15 @@ static_assert(
|
|||
#define TEMP_SENSOR_CHAMBER_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE
|
||||
#endif
|
||||
#endif
|
||||
#ifndef TEMP_SENSOR_COOLER_RAW_HI_TEMP
|
||||
#if TT_REVRAW(COOLER)
|
||||
#define TEMP_SENSOR_COOLER_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
|
||||
#define TEMP_SENSOR_COOLER_RAW_LO_TEMP 0
|
||||
#else
|
||||
#define TEMP_SENSOR_COOLER_RAW_HI_TEMP 0
|
||||
#define TEMP_SENSOR_COOLER_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE
|
||||
#endif
|
||||
#endif
|
||||
#ifndef TEMP_SENSOR_PROBE_RAW_HI_TEMP
|
||||
#if TT_REVRAW(PROBE)
|
||||
#define TEMP_SENSOR_PROBE_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
|
||||
|
|
|
|||
|
|
@ -91,6 +91,9 @@
|
|||
#if PIN_EXISTS(TEMP_CHAMBER) && ANALOG_OK(TEMP_CHAMBER_PIN)
|
||||
REPORT_NAME_ANALOG(__LINE__, TEMP_CHAMBER_PIN)
|
||||
#endif
|
||||
#if PIN_EXISTS(TEMP_COOLER) && ANALOG_OK(TEMP_COOLER_PIN)
|
||||
REPORT_NAME_ANALOG(__LINE__, TEMP_COOLER_PIN)
|
||||
#endif
|
||||
#if PIN_EXISTS(ADC_KEYPAD) && ANALOG_OK(ADC_KEYPAD_PIN)
|
||||
REPORT_NAME_ANALOG(__LINE__, ADC_KEYPAD_PIN)
|
||||
#endif
|
||||
|
|
@ -706,6 +709,9 @@
|
|||
#if PIN_EXISTS(HEATER_CHAMBER)
|
||||
REPORT_NAME_DIGITAL(__LINE__, HEATER_CHAMBER_PIN)
|
||||
#endif
|
||||
#if PIN_EXISTS(COOLER)
|
||||
REPORT_NAME_DIGITAL(__LINE__, COOLER_PIN)
|
||||
#endif
|
||||
#if PIN_EXISTS(HOME)
|
||||
REPORT_NAME_DIGITAL(__LINE__, HOME_PIN)
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -676,6 +676,24 @@
|
|||
#define _CHAMBER_FAN
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER && PIN_EXISTS(TEMP_COOLER)
|
||||
#define _COOLER_TEMP analogInputToDigitalPin(TEMP_COOLER_PIN),
|
||||
#else
|
||||
#define _COOLER_TEMP
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER && PIN_EXISTS(COOLER)
|
||||
#define _COOLER COOLER_PIN,
|
||||
#else
|
||||
#define _COOLER
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_COOLER && PINS_EXIST(TEMP_COOLER, COOLER_AUTO_FAN)
|
||||
#define _COOLER_FAN COOLER_AUTO_FAN_PIN,
|
||||
#else
|
||||
#define _COOLER_FAN
|
||||
#endif
|
||||
|
||||
#ifndef HAL_SENSITIVE_PINS
|
||||
#define HAL_SENSITIVE_PINS
|
||||
#endif
|
||||
|
|
@ -685,5 +703,5 @@
|
|||
_E0_PINS _E1_PINS _E2_PINS _E3_PINS _E4_PINS _E5_PINS _E6_PINS _E7_PINS \
|
||||
_H0_PINS _H1_PINS _H2_PINS _H3_PINS _H4_PINS _H5_PINS _H6_PINS _H7_PINS \
|
||||
_PS_ON _FAN0 _FAN1 _FAN2 _FAN3 _FAN4 _FAN5 _FAN6 _FAN7 _FANC \
|
||||
_BED_PINS _CHAMBER_TEMP _CHAMBER_HEATER _CHAMBER_FAN HAL_SENSITIVE_PINS \
|
||||
_BED_PINS _COOLER _CHAMBER_TEMP _CHAMBER_HEATER _CHAMBER_FAN HAL_SENSITIVE_PINS \
|
||||
}
|
||||
|
|
|
|||
|
|
@ -11,7 +11,7 @@ set -e
|
|||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 SERIAL_PORT 1
|
||||
exec_test $1 $2 "BigTreeTech SKR Pro Default Configuration" "$3"
|
||||
exec_test $1 $2 "BigTreeTech SKR Pro | Default Configuration" "$3"
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 SERIAL_PORT -1 \
|
||||
|
|
@ -19,14 +19,15 @@ opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 SERIAL_PORT -1 \
|
|||
E0_AUTO_FAN_PIN PC10 E1_AUTO_FAN_PIN PC11 E2_AUTO_FAN_PIN PC12 \
|
||||
X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2130
|
||||
opt_enable BLTOUCH EEPROM_SETTINGS AUTO_BED_LEVELING_3POINT Z_SAFE_HOMING PINS_DEBUGGING
|
||||
exec_test $1 $2 "BigTreeTech SKR Pro 3 Extruders, Auto-Fan, BLTOUCH, mixed TMC drivers" "$3"
|
||||
exec_test $1 $2 "BigTreeTech SKR Pro | 3 Extruders | Auto-Fan | BLTOUCH | Mixed TMC" "$3"
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 SERIAL_PORT -1 \
|
||||
CUTTER_POWER_UNIT PERCENT \
|
||||
SPINDLE_LASER_PWM_PIN HEATER_1_PIN SPINDLE_LASER_ENA_PIN HEATER_2_PIN
|
||||
SPINDLE_LASER_PWM_PIN HEATER_1_PIN SPINDLE_LASER_ENA_PIN HEATER_2_PIN \
|
||||
TEMP_SENSOR_COOLER 1000 TEMP_COOLER_PIN PD13
|
||||
opt_enable LASER_FEATURE REPRAP_DISCOUNT_SMART_CONTROLLER
|
||||
exec_test $1 $2 "Laser, LCD, PERCENT power unit" "$3"
|
||||
exec_test $1 $2 "BigTreeTech SKR Pro | Laser (Percent) | Cooling | LCD" "$3"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
|
|
|||
|
|
@ -196,6 +196,7 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
|
|||
-<src/gcode/sd/M32.cpp>
|
||||
-<src/gcode/sd/M808.cpp>
|
||||
-<src/gcode/temp/M104_M109.cpp>
|
||||
-<src/gcode/temp/M143_M193.cpp>
|
||||
-<src/gcode/temp/M155.cpp>
|
||||
-<src/gcode/units/G20_G21.cpp>
|
||||
-<src/gcode/units/M149.cpp>
|
||||
|
|
@ -406,6 +407,7 @@ SDSUPPORT = src_filter=+<src/sd/cardreader.cpp> +<src/sd/Sd2Card.c
|
|||
HAS_MEDIA_SUBCALLS = src_filter=+<src/gcode/sd/M32.cpp>
|
||||
GCODE_REPEAT_MARKERS = src_filter=+<src/feature/repeat.cpp> +<src/gcode/sd/M808.cpp>
|
||||
HAS_EXTRUDERS = src_filter=+<src/gcode/temp/M104_M109.cpp> +<src/gcode/config/M221.cpp>
|
||||
HAS_COOLER = src_filter=-<src/gcode/temp/M143_M193.cpp>
|
||||
AUTO_REPORT_TEMPERATURES = src_filter=+<src/gcode/temp/M155.cpp>
|
||||
INCH_MODE_SUPPORT = src_filter=+<src/gcode/units/G20_G21.cpp>
|
||||
TEMPERATURE_UNITS_SUPPORT = src_filter=+<src/gcode/units/M149.cpp>
|
||||
|
|
|
|||
Loading…
Reference in a new issue