moved to http://www.marlinfirmware.org/

Documentation/Hardware.md

@@ -1,210 +0,0 @@
-## Marlin Supported Hardware
-
-- [Gen 7 Custom](#10-board_gen7_custom)
-- [Gen 7 <=1.2](#11-board_gen7_12)
-- [Gen 7 v1.3](#12-board_gen7_13)
-- [Gen 7 v1.4](#13-board_gen7_14)
-- [Cheaptronic v1.0](#2-board_cheaptronic)
-- [Sethi 3D_1](#20-board_sethi)
-- [RAMPS <=1.2](#3-board_ramps_old)
-- [RAMPS 1.3 Extruder-Fan-Bed](#33-board_ramps_13_efb)
-- [RAMPS 1.3 Extruder-Extruder-Bed](#34-board_ramps_13_eeb)
-- [RAMPS 1.3 Extruder-Fan-Fan](#35-board_ramps_13_eff)
-- [RAMPS 1.3 Extruder-Extruder-Fan](#36-board_ramps_13_eef)
-- [Felix 2](#37-board_felix2)
-- [Duemilanove 328P](#4-board_duemilanove_328p)
-- [Gen 6](#5-board_gen6)
-- [Gen 6 Deluxe](#51-board_gen6_deluxe)
-- [Sanguinololu <=1.1](#6-board_sanguinololu_11)
-- [Sanguinololu 1.2](#62-board_sanguinololu_12)
-- [Melzi](#63-board_melzi)
-- [STB v1.1](#64-board_stb_11)
-- [Azteeg X1](#65-board_azteeg_x1)
-- [Melzi 1284](#66-board_melzi_1284)
-- [Azteeg X3](#67-board_azteeg_x3)
-- [Azteeg X3 Pro](#68-board_azteeg_x3_pro)
-- [Ultimaker](#7-board_ultimaker)
-- [Legacy Ultimaker](#71-board_ultimaker_old)
-- [Ultimainboard 2.x](#72-board_ultimain_2)
-- [3DRAG](#77-board_3drag)
-- [Vellemann K8200](#78-board_k8200)
-- [Teensylu](#8-board_teensylu)
-- [Rumba](#80-board_rumba)
-- [Printrboard](#81-board_printrboard)
-- [Brainwave](#82-board_brainwave)
-- [SAV Mk-I](#83-board_sav_mki)
-- [Teensy++2.0](#84-board_teensy2)
-- [Brainwave Pro](#85-board_brainwave_pro)
-- [Gen3+](#9-board_gen3_plus)
-- [Gen3 Monolithic](#22-board_gen3_monolithic)
-- [Megatronics](#70-board_megatronics)
-- [Megatronics 2.0](#701-board_megatronics_2)
-- [Minitronics 1.0](#702-board_megatronics_1)
-- [Megatronics 3.0](#703-board_megatronics_3)
-- [OMCA Alpha](#90-board_omca_a)
-- [OMCA Final](#91-board_omca)
-- [RAMBo](#301-board_rambo)
-- [Elefu Ra](#21-board_elefu_3)
-- [5DPrint D8](#88-board_5dprint)
-- [Leapfrog](#999-board_leapfrog)
-- [MKS BASE 1.0](#40-board_mks_base)
-- [bq Witbox](#41-board_witbox)
-- [bq Prusa i3 Hephestos](#42-board_hephestos)
-- [2PrintBeta BAM&DICE](#401-board_bam_dice)
-- [2PrintBeta BAM&DICE DUE](#402-board_bam_dice_due)
-
-#### 10 BOARD_GEN7_CUSTOM
-Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics"
-
-#### 11 BOARD_GEN7_12
-Gen7 v1.1, v1.2
-
-#### 12 BOARD_GEN7_13
-Gen7 v1.3
-
-#### 13 BOARD_GEN7_14
-Gen7 v1.4
-
-#### 2 BOARD_CHEAPTRONIC
-Cheaptronic v1.0
-
-#### 20 BOARD_SETHI
-Sethi 3D_1
-
-#### 3 BOARD_RAMPS_OLD
-MEGA/RAMPS up to 1.2
-
-#### 33 BOARD_RAMPS_13_EFB
-RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Bed)
-
-#### 34 BOARD_RAMPS_13_EEB
-RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed)
-
-#### 35 BOARD_RAMPS_13_EFF
-RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Fan)
-
-#### 36 BOARD_RAMPS_13_EEF
-RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Fan)
-
-#### 37 BOARD_FELIX2
-Felix 2.0+ Electronics Board (RAMPS like)
-
-#### 4 BOARD_DUEMILANOVE_328P
-Duemilanove w/ ATMega328P pin assignments
-
-#### 5 BOARD_GEN6
-Gen6
-
-#### 51 BOARD_GEN6_DELUXE
-Gen6 deluxe
-
-#### 6 BOARD_SANGUINOLOLU_11
-Sanguinololu < 1.2
-
-#### 62 BOARD_SANGUINOLOLU_12
-Sanguinololu 1.2 and above
-
-#### 63 BOARD_MELZI
-Melzi
-
-#### 64 BOARD_STB_11
-STB V1.1
-
-#### 65 BOARD_AZTEEG_X1
-Azteeg X1
-
-#### 66 BOARD_MELZI_1284
-Melzi with ATmega1284 (MaKr3d version)
-
-#### 67 BOARD_AZTEEG_X3
-Azteeg X3
-
-#### 68 BOARD_AZTEEG_X3_PRO
-Azteeg X3 Pro
-
-#### 7 BOARD_ULTIMAKER
-Ultimaker
-
-#### 71 BOARD_ULTIMAKER_OLD
-Ultimaker (Older electronics. Pre 1.5.4. This is rare)
-
-#### 72 BOARD_ULTIMAIN_2
-Ultimainboard 2.x (Uses TEMP_SENSOR 20)
-
-#### 77 BOARD_3DRAG
-3Drag Controller
-
-#### 78 BOARD_K8200
-Vellemann K8200 Controller (derived from 3Drag Controller)
-
-#### 8 BOARD_TEENSYLU
-Teensylu
-
-#### 80 BOARD_RUMBA
-Rumba
-
-#### 81 BOARD_PRINTRBOARD
-Printrboard (AT90USB1286)
-
-#### 82 BOARD_BRAINWAVE
-Brainwave (AT90USB646)
-
-#### 83 BOARD_SAV_MKI
-SAV Mk-I (AT90USB1286)
-
-#### 84 BOARD_TEENSY2
-Teensy++2.0 (AT90USB1286) - CLI compile: DEFINES=AT90USBxx_TEENSYPP_ASSIGNMENTS HARDWARE_MOTHERBOARD=84  make
-
-#### 85 BOARD_BRAINWAVE_PRO
-Brainwave Pro (AT90USB1286)
-
-#### 9 BOARD_GEN3_PLUS
-Gen3+
-
-#### 22 BOARD_GEN3_MONOLITHIC
-Gen3 Monolithic Electronics
-
-#### 70 BOARD_MEGATRONICS
-Megatronics
-
-#### 701 BOARD_MEGATRONICS_2
-Megatronics v2.0
-
-#### 702 BOARD_MEGATRONICS_1
-Minitronics v1.0
-
-#### 703 BOARD_MEGATRONICS_3
-Megatronics v3.0
-
-#### 90 BOARD_OMCA_A
-Alpha OMCA board
-
-#### 91 BOARD_OMCA
-Final OMCA board
-
-#### 301 BOARD_RAMBO
-Rambo
-
-#### 21 BOARD_ELEFU_3
-Elefu Ra Board (v3)
-
-#### 88 BOARD_5DPRINT
-5DPrint D8 Driver Board
-
-#### 999 BOARD_LEAPFROG
-Leapfrog
-
-#### 40 BOARD_MKS_BASE
-The [MKS BASE 1.0](http://reprap.org/wiki/MKS_BASE_1.0) is a custom board with pin assignments nearly identical to RAMPS 1.4.
-
-#### 41 BOARD_WITBOX
-The [bq WITBOX](https://github.com/bq/witbox) is not a controller board, but an open source box cartesian RAMPS-based printer. The controller is a standard Mega2560 with RAMPS 1.4 configured for a single extruder.
-
-#### 42 BOARD_HEPHESTOS
-The [bq Prusa i3 Hephestos](https://github.com/bq/prusa-i3-hephestos) is not a controller board, but an open source variant of the popular Prusa i3 Mendel RepRap. The controller is a standard Mega2560 with RAMPS 1.4 configured for a single extruder.
-
-#### 401 BOARD_BAM_DICE
-[2PrintBeta BAM&DICE](http://www.2printbeta.de/) with STK drivers. The Beta Arduino Mega (BAM) shield is a crowd-funded open source RAMPS shield with 5 slots for plugin modules instead of the standard stepper driver sockets. The DICE-STK module a stepper driver module utilizing the STK682-010-E with up to 128X micro-stepping. (A4988 also available.)
-
-#### 402 BOARD_BAM_DICE_DUE
-[2PrintBeta BAM&DICE Due](http://www.2printbeta.de/) with STK drivers. This variant of the BAM&DICE is made for the Due instead of the Mega.