Azteeg X5 Mini support (#13425)
This commit is contained in:
InsanityAutomation
Scott Lahteine
parent
f9b2b3e4f5
commit
ba31d39f6d
|
|
@ -679,6 +679,7 @@
|
||||||
* A (A shifted) B (B shifted) IC
|
* A (A shifted) B (B shifted) IC
|
||||||
* Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451
|
* Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451
|
||||||
* AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451
|
* AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451
|
||||||
|
* AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451
|
||||||
* AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451
|
* AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451
|
||||||
* MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018
|
* MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018
|
||||||
*/
|
*/
|
||||||
|
|
|
||||||
|
|
@ -189,10 +189,11 @@
|
||||||
#define BOARD_COHESION3D_REMIX 1755 // Cohesion3D ReMix
|
#define BOARD_COHESION3D_REMIX 1755 // Cohesion3D ReMix
|
||||||
#define BOARD_COHESION3D_MINI 1756 // Cohesion3D Mini
|
#define BOARD_COHESION3D_MINI 1756 // Cohesion3D Mini
|
||||||
#define BOARD_SMOOTHIEBOARD 1757 // Smoothieboard
|
#define BOARD_SMOOTHIEBOARD 1757 // Smoothieboard
|
||||||
#define BOARD_AZTEEG_X5_MINI_WIFI 1758 // Azteeg X5 Mini (Power outputs: Hotend0, Bed, Fan)
|
#define BOARD_AZTEEG_X5_MINI_WIFI 1758 // Azteeg X5 Mini Wifi (Power outputs: Hotend0, Bed, Fan)
|
||||||
#define BOARD_BIQU_SKR_V1_1 1759 // BIQU SKR_V1.1 (Power outputs: Hotend0,Hotend1, Fan, Bed)
|
#define BOARD_BIQU_SKR_V1_1 1759 // BIQU SKR_V1.1 (Power outputs: Hotend0,Hotend1, Fan, Bed)
|
||||||
#define BOARD_BIQU_B300_V1_0 1760 // BIQU B300_V1.0 (Power outputs: Hotend0, Fan, Bed, SPI Driver)
|
#define BOARD_BIQU_B300_V1_0 1760 // BIQU B300_V1.0 (Power outputs: Hotend0, Fan, Bed, SPI Driver)
|
||||||
#define BOARD_BIGTREE_SKR_V1_3 1761 // BIGTREE SKR_V1.3 (Power outputs: Hotend0, Hotend1, Fan, Bed)
|
#define BOARD_BIGTREE_SKR_V1_3 1761 // BIGTREE SKR_V1.3 (Power outputs: Hotend0, Hotend1, Fan, Bed)
|
||||||
|
#define BOARD_AZTEEG_X5_MINI 1762 // Azteeg X5 Mini (Power outputs: Hotend0, Bed, Fan)
|
||||||
|
|
||||||
//
|
//
|
||||||
// SAM3X8E ARM Cortex M3
|
// SAM3X8E ARM Cortex M3
|
||||||
|
|
|
||||||
|
|
@ -35,6 +35,9 @@
|
||||||
#if MB(5DPRINT)
|
#if MB(5DPRINT)
|
||||||
#define DIGIPOT_I2C_FACTOR 117.96
|
#define DIGIPOT_I2C_FACTOR 117.96
|
||||||
#define DIGIPOT_I2C_MAX_CURRENT 1.736
|
#define DIGIPOT_I2C_MAX_CURRENT 1.736
|
||||||
|
#elif MB(AZTEEG_X5_MINI) || MB(AZTEEG_X5_MINI_WIFI)
|
||||||
|
#define DIGIPOT_I2C_FACTOR 113.5
|
||||||
|
#define DIGIPOT_I2C_MAX_CURRENT 2.0
|
||||||
#else
|
#else
|
||||||
#define DIGIPOT_I2C_FACTOR 106.7
|
#define DIGIPOT_I2C_FACTOR 106.7
|
||||||
#define DIGIPOT_I2C_MAX_CURRENT 2.5
|
#define DIGIPOT_I2C_MAX_CURRENT 2.5
|
||||||
|
|
|
||||||
|
|
@ -320,6 +320,8 @@
|
||||||
#include "pins_AZSMZ_MINI.h" // LPC1768 env:LPC1768
|
#include "pins_AZSMZ_MINI.h" // LPC1768 env:LPC1768
|
||||||
#elif MB(AZTEEG_X5_GT)
|
#elif MB(AZTEEG_X5_GT)
|
||||||
#include "pins_AZTEEG_X5_GT.h" // LPC1769 env:LPC1769
|
#include "pins_AZTEEG_X5_GT.h" // LPC1769 env:LPC1769
|
||||||
|
#elif MB(AZTEEG_X5_MINI)
|
||||||
|
#include "pins_AZTEEG_X5_MINI.h" // LPC1769 env:LPC1769
|
||||||
#elif MB(AZTEEG_X5_MINI_WIFI)
|
#elif MB(AZTEEG_X5_MINI_WIFI)
|
||||||
#include "pins_AZTEEG_X5_MINI_WIFI.h" // LPC1769 env:LPC1769
|
#include "pins_AZTEEG_X5_MINI_WIFI.h" // LPC1769 env:LPC1769
|
||||||
#elif MB(BIQU_BQ111_A4)
|
#elif MB(BIQU_BQ111_A4)
|
||||||
|
|
|
||||||
|
|
@ -142,4 +142,6 @@
|
||||||
#define SDSS 20 // B0
|
#define SDSS 20 // B0
|
||||||
|
|
||||||
//DIGIPOTS slave addresses
|
//DIGIPOTS slave addresses
|
||||||
#define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for DIGIPOT 0x2C (0x58 <- 0x2C << 1)
|
#ifndef DIGIPOT_I2C_ADDRESS_A
|
||||||
|
#define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for DIGIPOT 0x2C (0x58 <- 0x2C << 1)
|
||||||
|
#endif
|
||||||
|
|
|
||||||
|
|
@ -48,8 +48,12 @@
|
||||||
#include "pins_RAMPS.h"
|
#include "pins_RAMPS.h"
|
||||||
|
|
||||||
// DIGIPOT slave addresses
|
// DIGIPOT slave addresses
|
||||||
#define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT 0x2C (0x58 <- 0x2C << 1)
|
#ifndef DIGIPOT_I2C_ADDRESS_A
|
||||||
#define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT 0x2E (0x5C <- 0x2E << 1)
|
#define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT 0x2C (0x58 <- 0x2C << 1)
|
||||||
|
#endif
|
||||||
|
#ifndef DIGIPOT_I2C_ADDRESS_B
|
||||||
|
#define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT 0x2E (0x5C <- 0x2E << 1)
|
||||||
|
#endif
|
||||||
|
|
||||||
//
|
//
|
||||||
// Servos
|
// Servos
|
||||||
|
|
|
||||||
218
Marlin/src/pins/pins_AZTEEG_X5_MINI.h
Normal file
218
Marlin/src/pins/pins_AZTEEG_X5_MINI.h
Normal file
|
|
@ -0,0 +1,218 @@
|
||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Azteeg X5 MINI pin assignments
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef LPC1769
|
||||||
|
#error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef BOARD_NAME
|
||||||
|
#define BOARD_NAME "Azteeg X5 MINI WIFI"
|
||||||
|
#endif
|
||||||
|
#define BOARD_WEBSITE_URL "http://www.panucatt.com/azteeg_X5_mini_reprap_3d_printer_controller_p/ax5mini.htm"
|
||||||
|
|
||||||
|
//
|
||||||
|
// LED
|
||||||
|
//
|
||||||
|
#define LED_PIN P1_18
|
||||||
|
|
||||||
|
//
|
||||||
|
// Servos
|
||||||
|
//
|
||||||
|
#define SERVO0_PIN P1_29
|
||||||
|
|
||||||
|
//
|
||||||
|
// Limit Switches
|
||||||
|
//
|
||||||
|
#define X_STOP_PIN P1_24
|
||||||
|
#define Y_STOP_PIN P1_26
|
||||||
|
#define Z_STOP_PIN P1_28
|
||||||
|
|
||||||
|
#ifndef FILWIDTH_PIN
|
||||||
|
#define FILWIDTH_PIN P2_04
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//
|
||||||
|
// Steppers
|
||||||
|
//
|
||||||
|
#define X_STEP_PIN P2_01
|
||||||
|
#define X_DIR_PIN P0_11
|
||||||
|
#define X_ENABLE_PIN P0_10
|
||||||
|
|
||||||
|
#define Y_STEP_PIN P2_02
|
||||||
|
#define Y_DIR_PIN P0_20
|
||||||
|
#define Y_ENABLE_PIN P0_19
|
||||||
|
|
||||||
|
#define Z_STEP_PIN P2_03
|
||||||
|
#define Z_DIR_PIN P0_22
|
||||||
|
#define Z_ENABLE_PIN P0_21
|
||||||
|
|
||||||
|
#define E0_STEP_PIN P2_00
|
||||||
|
#define E0_DIR_PIN P0_05
|
||||||
|
#define E0_ENABLE_PIN P0_04
|
||||||
|
|
||||||
|
//
|
||||||
|
// DIGIPOT slave addresses
|
||||||
|
//
|
||||||
|
#ifndef DIGIPOT_I2C_ADDRESS_A
|
||||||
|
#define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef DIGIPOT_I2C_ADDRESS_B
|
||||||
|
#define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//
|
||||||
|
// Temperature Sensors
|
||||||
|
// 3.3V max when defined as an analog input
|
||||||
|
//
|
||||||
|
#define TEMP_BED_PIN 0 // A0 (TH1)
|
||||||
|
#define TEMP_0_PIN 1 // A1 (TH2)
|
||||||
|
|
||||||
|
//
|
||||||
|
// Heaters / Fans
|
||||||
|
//
|
||||||
|
#define HEATER_BED_PIN P2_07
|
||||||
|
#define HEATER_0_PIN P2_05
|
||||||
|
#ifndef FAN_PIN
|
||||||
|
#define FAN_PIN P0_26
|
||||||
|
#endif
|
||||||
|
#define FAN1_PIN P1_25
|
||||||
|
|
||||||
|
//
|
||||||
|
// Display
|
||||||
|
//
|
||||||
|
#if ENABLED(ULTRA_LCD)
|
||||||
|
|
||||||
|
#if ENABLED(CR10_STOCKDISPLAY)
|
||||||
|
|
||||||
|
// Re-Arm can support Creality stock display without SD card reader and single cable on EXP3.
|
||||||
|
// Re-Arm J3 pins 1 (p1.31) & 2 (P3.26) are not used. Stock cable will need to have one
|
||||||
|
// 10-pin IDC connector trimmed or replaced with a 12-pin IDC connector to fit J3.
|
||||||
|
// Requires REVERSE_ENCODER_DIRECTION in Configuration.h
|
||||||
|
|
||||||
|
#define BEEPER_PIN P2_11 // J3-3 & AUX-4
|
||||||
|
|
||||||
|
#define BTN_EN1 P0_16 // J3-7 & AUX-4
|
||||||
|
#define BTN_EN2 P1_23 // J3-5 & AUX-4
|
||||||
|
#define BTN_ENC P3_25 // J3-4 & AUX-4
|
||||||
|
|
||||||
|
#define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS)
|
||||||
|
#define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI)
|
||||||
|
#define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK)
|
||||||
|
|
||||||
|
#else
|
||||||
|
|
||||||
|
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
|
||||||
|
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
|
||||||
|
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
|
||||||
|
|
||||||
|
#define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
|
||||||
|
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4
|
||||||
|
#define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4
|
||||||
|
#define LCD_SDSS P0_16 // (16) J3-7 & AUX-4
|
||||||
|
#define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers
|
||||||
|
#define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
|
||||||
|
#define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
|
||||||
|
|
||||||
|
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
|
||||||
|
|
||||||
|
#if ENABLED(REPRAPWORLD_KEYPAD)
|
||||||
|
#define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3
|
||||||
|
#define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3
|
||||||
|
#define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3
|
||||||
|
#elif DISABLED(NEWPANEL)
|
||||||
|
//#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4
|
||||||
|
//#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4
|
||||||
|
//#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4
|
||||||
|
//#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if ANY(VIKI2, miniVIKI)
|
||||||
|
//#define LCD_SCREEN_ROT_180
|
||||||
|
|
||||||
|
#define BEEPER_PIN P1_30 // (37) may change if cable changes
|
||||||
|
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
|
||||||
|
#define DOGLCD_SCK SCK_PIN
|
||||||
|
#define DOGLCD_MOSI MOSI_PIN
|
||||||
|
|
||||||
|
#define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes
|
||||||
|
#define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
|
||||||
|
#else
|
||||||
|
#if ENABLED(ULTIPANEL)
|
||||||
|
#define LCD_PINS_D5 P1_17 // (71) ENET_MDIO
|
||||||
|
#define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER
|
||||||
|
#define LCD_PINS_D7 P1_10 // (75) ENET_RXD1
|
||||||
|
#endif
|
||||||
|
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
|
||||||
|
#define DOGLCD_CS P0_16 // (16)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(MINIPANEL)
|
||||||
|
// GLCD features
|
||||||
|
// Uncomment screen orientation
|
||||||
|
//#define LCD_SCREEN_ROT_90
|
||||||
|
//#define LCD_SCREEN_ROT_180
|
||||||
|
//#define LCD_SCREEN_ROT_270
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // ULTRA_LCD
|
||||||
|
|
||||||
|
//
|
||||||
|
// SD Support
|
||||||
|
//
|
||||||
|
//#define USB_SD_DISABLED // Disable host access to SD card as mass storage device through USB
|
||||||
|
//#define USB_SD_ONBOARD // Enable host access to SD card as mass storage device through USB
|
||||||
|
|
||||||
|
//#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD
|
||||||
|
#define LPC_SD_ONBOARD // Marlin uses the SD drive on the control board. There is no SD detect pin
|
||||||
|
// for the onboard card. Init card from LCD menu or send M21 whenever printer
|
||||||
|
// is powered on to enable SD access.
|
||||||
|
|
||||||
|
#if ENABLED(LPC_SD_LCD)
|
||||||
|
|
||||||
|
#define SCK_PIN P0_15
|
||||||
|
#define MISO_PIN P0_17
|
||||||
|
#define MOSI_PIN P0_18
|
||||||
|
#define SS_PIN P1_23 // Chip select for SD card used by Marlin
|
||||||
|
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
|
||||||
|
|
||||||
|
#elif ENABLED(LPC_SD_ONBOARD)
|
||||||
|
|
||||||
|
#if ENABLED(USB_SD_ONBOARD)
|
||||||
|
// When sharing the SD card with a PC we want the menu options to
|
||||||
|
// mount/unmount the card and refresh it. So we disable card detect.
|
||||||
|
#define SHARED_SD_CARD
|
||||||
|
#undef SD_DETECT_PIN // there is also no detect pin for the onboard card
|
||||||
|
#endif
|
||||||
|
#define SCK_PIN P0_07
|
||||||
|
#define MISO_PIN P0_08
|
||||||
|
#define MOSI_PIN P0_09
|
||||||
|
#define SS_PIN P0_06 // Chip select for SD card used by Marlin
|
||||||
|
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -29,183 +29,15 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define BOARD_NAME "Azteeg X5 MINI WIFI"
|
#define BOARD_NAME "Azteeg X5 MINI WIFI"
|
||||||
#define BOARD_WEBSITE_URL "http://www.panucatt.com/azteeg_X5_mini_reprap_3d_printer_controller_p/ax5mini.htm"
|
|
||||||
|
|
||||||
//
|
|
||||||
// LED
|
|
||||||
//
|
|
||||||
#define LED_PIN P1_18
|
|
||||||
|
|
||||||
//
|
|
||||||
// Servos
|
|
||||||
//
|
|
||||||
#define SERVO0_PIN P1_29
|
|
||||||
|
|
||||||
//
|
|
||||||
// Limit Switches
|
|
||||||
//
|
|
||||||
#define X_STOP_PIN P1_24
|
|
||||||
#define Y_STOP_PIN P1_26
|
|
||||||
#define Z_STOP_PIN P1_28
|
|
||||||
|
|
||||||
#ifndef FILWIDTH_PIN
|
|
||||||
#define FILWIDTH_PIN P2_04
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//
|
|
||||||
// Steppers
|
|
||||||
//
|
|
||||||
#define X_STEP_PIN P2_01
|
|
||||||
#define X_DIR_PIN P0_11
|
|
||||||
#define X_ENABLE_PIN P0_10
|
|
||||||
|
|
||||||
#define Y_STEP_PIN P2_02
|
|
||||||
#define Y_DIR_PIN P0_20
|
|
||||||
#define Y_ENABLE_PIN P0_19
|
|
||||||
|
|
||||||
#define Z_STEP_PIN P2_03
|
|
||||||
#define Z_DIR_PIN P0_22
|
|
||||||
#define Z_ENABLE_PIN P0_21
|
|
||||||
|
|
||||||
#define E0_STEP_PIN P2_00
|
|
||||||
#define E0_DIR_PIN P0_05
|
|
||||||
#define E0_ENABLE_PIN P0_04
|
|
||||||
|
|
||||||
//
|
//
|
||||||
// DIGIPOT slave addresses
|
// DIGIPOT slave addresses
|
||||||
//
|
//
|
||||||
#define DIGIPOT_I2C_ADDRESS_A 0x58 // shifted slave address for first DIGIPOT (0x58 <- 0x2C << 1)
|
#ifndef DIGIPOT_I2C_ADDRESS_A
|
||||||
#define DIGIPOT_I2C_ADDRESS_B 0x5C // shifted slave address for second DIGIPOT (0x5C <- 0x2E << 1)
|
#define DIGIPOT_I2C_ADDRESS_A 0x58 // shifted slave address for first DIGIPOT (0x58 <- 0x2C << 1)
|
||||||
|
|
||||||
//
|
|
||||||
// Temperature Sensors
|
|
||||||
// 3.3V max when defined as an analog input
|
|
||||||
//
|
|
||||||
#define TEMP_BED_PIN 0 // A0 (TH1)
|
|
||||||
#define TEMP_0_PIN 1 // A1 (TH2)
|
|
||||||
|
|
||||||
//
|
|
||||||
// Heaters / Fans
|
|
||||||
//
|
|
||||||
#define HEATER_BED_PIN P2_07
|
|
||||||
#define HEATER_0_PIN P2_05
|
|
||||||
#ifndef FAN_PIN
|
|
||||||
#define FAN_PIN P0_26
|
|
||||||
#endif
|
#endif
|
||||||
#define FAN1_PIN P1_25
|
#ifndef DIGIPOT_I2C_ADDRESS_B
|
||||||
|
#define DIGIPOT_I2C_ADDRESS_B 0x5C // shifted slave address for second DIGIPOT (0x5C <- 0x2E << 1)
|
||||||
//
|
|
||||||
// Display
|
|
||||||
//
|
|
||||||
#if ENABLED(ULTRA_LCD)
|
|
||||||
|
|
||||||
#if ENABLED(CR10_STOCKDISPLAY)
|
|
||||||
|
|
||||||
// Re-Arm can support Creality stock display without SD card reader and single cable on EXP3.
|
|
||||||
// Re-Arm J3 pins 1 (p1.31) & 2 (P3.26) are not used. Stock cable will need to have one
|
|
||||||
// 10-pin IDC connector trimmed or replaced with a 12-pin IDC connector to fit J3.
|
|
||||||
// Requires REVERSE_ENCODER_DIRECTION in Configuration.h
|
|
||||||
|
|
||||||
#define BEEPER_PIN P2_11 // J3-3 & AUX-4
|
|
||||||
|
|
||||||
#define BTN_EN1 P0_16 // J3-7 & AUX-4
|
|
||||||
#define BTN_EN2 P1_23 // J3-5 & AUX-4
|
|
||||||
#define BTN_ENC P3_25 // J3-4 & AUX-4
|
|
||||||
|
|
||||||
#define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS)
|
|
||||||
#define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI)
|
|
||||||
#define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK)
|
|
||||||
|
|
||||||
#else
|
|
||||||
|
|
||||||
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
|
|
||||||
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
|
|
||||||
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
|
|
||||||
|
|
||||||
#define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
|
|
||||||
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4
|
|
||||||
#define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4
|
|
||||||
#define LCD_SDSS P0_16 // (16) J3-7 & AUX-4
|
|
||||||
#define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers
|
|
||||||
#define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
|
|
||||||
#define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
|
|
||||||
|
|
||||||
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
|
|
||||||
|
|
||||||
#if ENABLED(REPRAPWORLD_KEYPAD)
|
|
||||||
#define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3
|
|
||||||
#define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3
|
|
||||||
#define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3
|
|
||||||
#elif DISABLED(NEWPANEL)
|
|
||||||
//#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4
|
|
||||||
//#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4
|
|
||||||
//#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4
|
|
||||||
//#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ANY(VIKI2, miniVIKI)
|
|
||||||
//#define LCD_SCREEN_ROT_180
|
|
||||||
|
|
||||||
#define BEEPER_PIN P1_30 // (37) may change if cable changes
|
|
||||||
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
|
|
||||||
#define DOGLCD_SCK SCK_PIN
|
|
||||||
#define DOGLCD_MOSI MOSI_PIN
|
|
||||||
|
|
||||||
#define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes
|
|
||||||
#define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
|
|
||||||
#else
|
|
||||||
#if ENABLED(ULTIPANEL)
|
|
||||||
#define LCD_PINS_D5 P1_17 // (71) ENET_MDIO
|
|
||||||
#define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER
|
|
||||||
#define LCD_PINS_D7 P1_10 // (75) ENET_RXD1
|
|
||||||
#endif
|
|
||||||
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
|
|
||||||
#define DOGLCD_CS P0_16 // (16)
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(MINIPANEL)
|
|
||||||
// GLCD features
|
|
||||||
// Uncomment screen orientation
|
|
||||||
//#define LCD_SCREEN_ROT_90
|
|
||||||
//#define LCD_SCREEN_ROT_180
|
|
||||||
//#define LCD_SCREEN_ROT_270
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#endif // ULTRA_LCD
|
|
||||||
|
|
||||||
//
|
|
||||||
// SD Support
|
|
||||||
//
|
|
||||||
//#define USB_SD_DISABLED // Disable host access to SD card as mass storage device through USB
|
|
||||||
//#define USB_SD_ONBOARD // Enable host access to SD card as mass storage device through USB
|
|
||||||
|
|
||||||
//#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD
|
|
||||||
#define LPC_SD_ONBOARD // Marlin uses the SD drive on the control board. There is no SD detect pin
|
|
||||||
// for the onboard card. Init card from LCD menu or send M21 whenever printer
|
|
||||||
// is powered on to enable SD access.
|
|
||||||
|
|
||||||
#if ENABLED(LPC_SD_LCD)
|
|
||||||
|
|
||||||
#define SCK_PIN P0_15
|
|
||||||
#define MISO_PIN P0_17
|
|
||||||
#define MOSI_PIN P0_18
|
|
||||||
#define SS_PIN P1_23 // Chip select for SD card used by Marlin
|
|
||||||
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
|
|
||||||
|
|
||||||
#elif ENABLED(LPC_SD_ONBOARD)
|
|
||||||
|
|
||||||
#if ENABLED(USB_SD_ONBOARD)
|
|
||||||
// When sharing the SD card with a PC we want the menu options to
|
|
||||||
// mount/unmount the card and refresh it. So we disable card detect.
|
|
||||||
#define SHARED_SD_CARD
|
|
||||||
#undef SD_DETECT_PIN // there is also no detect pin for the onboard card
|
|
||||||
#endif
|
|
||||||
#define SCK_PIN P0_07
|
|
||||||
#define MISO_PIN P0_08
|
|
||||||
#define MOSI_PIN P0_09
|
|
||||||
#define SS_PIN P0_06 // Chip select for SD card used by Marlin
|
|
||||||
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
|
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#include "pins_AZTEEG_X5_MINI.h"
|
||||||
|
|
|
||||||
|
|
@ -104,7 +104,9 @@
|
||||||
#define DIGIPOTS_I2C_SDA_E0 27 // A5
|
#define DIGIPOTS_I2C_SDA_E0 27 // A5
|
||||||
#define DIGIPOTS_I2C_SDA_E1 77 // J6
|
#define DIGIPOTS_I2C_SDA_E1 77 // J6
|
||||||
|
|
||||||
#define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address (5E <- 2F << 1)
|
#ifndef DIGIPOT_I2C_ADDRESS_A
|
||||||
|
#define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address (5E <- 2F << 1)
|
||||||
|
#endif
|
||||||
|
|
||||||
//
|
//
|
||||||
// Temperature Sensors
|
// Temperature Sensors
|
||||||
|
|
|
||||||
Loading…
Reference in a new issue