zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Merge pull request #5072 from thinkyhead/rc_preset_auto_fans

Browse source 
Add predefined AUTO_FAN_PINs to pins files
This commit is contained in:
Scott Lahteine 2016-10-27 17:12:11 -05:00 committed by GitHub
parent 1e00f5a4bd 9cbedab91b
commit c34dbfb248
30 changed files with 426 additions and 243 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

24
Marlin/Conditionals_post.h
View file

@ -428,20 +428,20 @@
#define HAS_HEATER_2 (PIN_EXISTS(HEATER_2)) #define HAS_HEATER_2 (PIN_EXISTS(HEATER_2))
#define HAS_HEATER_3 (PIN_EXISTS(HEATER_3)) #define HAS_HEATER_3 (PIN_EXISTS(HEATER_3))
#define HAS_HEATER_BED (PIN_EXISTS(HEATER_BED)) #define HAS_HEATER_BED (PIN_EXISTS(HEATER_BED))
#define HAS_AUTO_FAN_0 (PIN_EXISTS(EXTRUDER_0_AUTO_FAN)) #define HAS_AUTO_FAN_0 (PIN_EXISTS(E0_AUTO_FAN))
#define HAS_AUTO_FAN_1 (PIN_EXISTS(EXTRUDER_1_AUTO_FAN)) #define HAS_AUTO_FAN_1 (HOTENDS > 1 && PIN_EXISTS(E1_AUTO_FAN))
#define HAS_AUTO_FAN_2 (PIN_EXISTS(EXTRUDER_2_AUTO_FAN)) #define HAS_AUTO_FAN_2 (HOTENDS > 2 && PIN_EXISTS(E2_AUTO_FAN))
#define HAS_AUTO_FAN_3 (PIN_EXISTS(EXTRUDER_3_AUTO_FAN)) #define HAS_AUTO_FAN_3 (HOTENDS > 3 && PIN_EXISTS(E3_AUTO_FAN))
#define AUTO_1_IS_0 (EXTRUDER_1_AUTO_FAN_PIN == EXTRUDER_0_AUTO_FAN_PIN)
#define AUTO_2_IS_0 (EXTRUDER_2_AUTO_FAN_PIN == EXTRUDER_0_AUTO_FAN_PIN)
#define AUTO_2_IS_1 (EXTRUDER_2_AUTO_FAN_PIN == EXTRUDER_1_AUTO_FAN_PIN)
#define AUTO_3_IS_0 (EXTRUDER_3_AUTO_FAN_PIN == EXTRUDER_0_AUTO_FAN_PIN)
#define AUTO_3_IS_1 (EXTRUDER_3_AUTO_FAN_PIN == EXTRUDER_1_AUTO_FAN_PIN)
#define AUTO_3_IS_2 (EXTRUDER_3_AUTO_FAN_PIN == EXTRUDER_2_AUTO_FAN_PIN)
#define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3) #define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3)
#define AUTO_1_IS_0 (E1_AUTO_FAN_PIN == E0_AUTO_FAN_PIN)
#define AUTO_2_IS_0 (E2_AUTO_FAN_PIN == E0_AUTO_FAN_PIN)
#define AUTO_2_IS_1 (E2_AUTO_FAN_PIN == E1_AUTO_FAN_PIN)
#define AUTO_3_IS_0 (E3_AUTO_FAN_PIN == E0_AUTO_FAN_PIN)
#define AUTO_3_IS_1 (E3_AUTO_FAN_PIN == E1_AUTO_FAN_PIN)
#define AUTO_3_IS_2 (E3_AUTO_FAN_PIN == E2_AUTO_FAN_PIN)
#define HAS_FAN0 (PIN_EXISTS(FAN)) #define HAS_FAN0 (PIN_EXISTS(FAN))
#define HAS_FAN1 (PIN_EXISTS(FAN1) && CONTROLLERFAN_PIN != FAN1_PIN && EXTRUDER_0_AUTO_FAN_PIN != FAN1_PIN && EXTRUDER_1_AUTO_FAN_PIN != FAN1_PIN && EXTRUDER_2_AUTO_FAN_PIN != FAN1_PIN && EXTRUDER_3_AUTO_FAN_PIN != FAN1_PIN) #define HAS_FAN1 (PIN_EXISTS(FAN1) && CONTROLLERFAN_PIN != FAN1_PIN && E0_AUTO_FAN_PIN != FAN1_PIN && E1_AUTO_FAN_PIN != FAN1_PIN && E2_AUTO_FAN_PIN != FAN1_PIN && E3_AUTO_FAN_PIN != FAN1_PIN)
#define HAS_FAN2 (PIN_EXISTS(FAN2) && CONTROLLERFAN_PIN != FAN2_PIN && EXTRUDER_0_AUTO_FAN_PIN != FAN2_PIN && EXTRUDER_1_AUTO_FAN_PIN != FAN2_PIN && EXTRUDER_2_AUTO_FAN_PIN != FAN2_PIN && EXTRUDER_3_AUTO_FAN_PIN != FAN2_PIN) #define HAS_FAN2 (PIN_EXISTS(FAN2) && CONTROLLERFAN_PIN != FAN2_PIN && E0_AUTO_FAN_PIN != FAN2_PIN && E1_AUTO_FAN_PIN != FAN2_PIN && E2_AUTO_FAN_PIN != FAN2_PIN && E3_AUTO_FAN_PIN != FAN2_PIN)
#define HAS_CONTROLLERFAN (PIN_EXISTS(CONTROLLERFAN)) #define HAS_CONTROLLERFAN (PIN_EXISTS(CONTROLLERFAN))
#define HAS_SERVOS (defined(NUM_SERVOS) && NUM_SERVOS > 0) #define HAS_SERVOS (defined(NUM_SERVOS) && NUM_SERVOS > 0)
#define HAS_SERVO_0 (PIN_EXISTS(SERVO0)) #define HAS_SERVO_0 (PIN_EXISTS(SERVO0))

25
Marlin/Configuration_adv.h
View file

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

6
Marlin/Marlin_main.cpp
View file

@ -9248,8 +9248,14 @@ void prepare_move_to_destination() {
bool new_led = (max_temp > 55.0) ? true : (max_temp < 54.0) ? false : red_led; bool new_led = (max_temp > 55.0) ? true : (max_temp < 54.0) ? false : red_led;
if (new_led != red_led) { if (new_led != red_led) {
red_led = new_led; red_led = new_led;
#if PIN_EXISTS(STAT_LED_RED)
WRITE(STAT_LED_RED_PIN, new_led ? HIGH : LOW); WRITE(STAT_LED_RED_PIN, new_led ? HIGH : LOW);
#if PIN_EXISTS(STAT_LED_BLUE)
WRITE(STAT_LED_BLUE_PIN, new_led ? LOW : HIGH); WRITE(STAT_LED_BLUE_PIN, new_led ? LOW : HIGH);
#endif
#else
WRITE(STAT_LED_BLUE_PIN, new_led ? HIGH : LOW);
#endif
} }
} }
} }

57
Marlin/SanityCheck.h
View file

@ -153,6 +153,8 @@
#error "LCD_PIN_BL is now LCD_BACKLIGHT_PIN. Please update your pins definitions." #error "LCD_PIN_BL is now LCD_BACKLIGHT_PIN. Please update your pins definitions."
#elif defined(LCD_PIN_RESET) #elif defined(LCD_PIN_RESET)
#error "LCD_PIN_RESET is now LCD_RESET_PIN. Please update your pins definitions." #error "LCD_PIN_RESET is now LCD_RESET_PIN. Please update your pins definitions."
#elif defined(EXTRUDER_0_AUTO_FAN_PIN) || defined(EXTRUDER_1_AUTO_FAN_PIN) || defined(EXTRUDER_2_AUTO_FAN_PIN) || defined(EXTRUDER_3_AUTO_FAN_PIN)
#error "EXTRUDER_[0123]_AUTO_FAN_PIN is now E[0123]_AUTO_FAN_PIN. Please update your Configuration_adv.h."
#endif #endif
/** /**
@ -678,14 +680,14 @@
*/ */
#if HAS_AUTO_FAN #if HAS_AUTO_FAN
#if HAS_FAN0 #if HAS_FAN0
#if EXTRUDER_0_AUTO_FAN_PIN == FAN_PIN #if E0_AUTO_FAN_PIN == FAN_PIN
#error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to FAN_PIN." #error "You cannot set E0_AUTO_FAN_PIN equal to FAN_PIN."
#elif EXTRUDER_1_AUTO_FAN_PIN == FAN_PIN #elif E1_AUTO_FAN_PIN == FAN_PIN
#error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to FAN_PIN." #error "You cannot set E1_AUTO_FAN_PIN equal to FAN_PIN."
#elif EXTRUDER_2_AUTO_FAN_PIN == FAN_PIN #elif E2_AUTO_FAN_PIN == FAN_PIN
#error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to FAN_PIN." #error "You cannot set E2_AUTO_FAN_PIN equal to FAN_PIN."
#elif EXTRUDER_3_AUTO_FAN_PIN == FAN_PIN #elif E3_AUTO_FAN_PIN == FAN_PIN
#error "You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to FAN_PIN." #error "You cannot set E3_AUTO_FAN_PIN equal to FAN_PIN."
#endif #endif
#endif #endif
#endif #endif
@ -695,14 +697,14 @@
#endif #endif
#if HAS_CONTROLLERFAN #if HAS_CONTROLLERFAN
#if EXTRUDER_0_AUTO_FAN_PIN == CONTROLLERFAN_PIN #if E0_AUTO_FAN_PIN == CONTROLLERFAN_PIN
#error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." #error "You cannot set E0_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
#elif EXTRUDER_1_AUTO_FAN_PIN == CONTROLLERFAN_PIN #elif E1_AUTO_FAN_PIN == CONTROLLERFAN_PIN
#error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." #error "You cannot set E1_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
#elif EXTRUDER_2_AUTO_FAN_PIN == CONTROLLERFAN_PIN #elif E2_AUTO_FAN_PIN == CONTROLLERFAN_PIN
#error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." #error "You cannot set E2_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
#elif EXTRUDER_3_AUTO_FAN_PIN == CONTROLLERFAN_PIN #elif E3_AUTO_FAN_PIN == CONTROLLERFAN_PIN
#error "You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." #error "You cannot set E3_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
#endif #endif
#endif #endif
@ -770,8 +772,8 @@
/** /**
* Temperature status LEDs * Temperature status LEDs
*/ */
#if ENABLED(TEMP_STAT_LEDS) && !(PIN_EXISTS(STAT_LED_RED) && PIN_EXISTS(STAT_LED_BLUE)) #if ENABLED(TEMP_STAT_LEDS) && !PIN_EXISTS(STAT_LED_RED) && !PIN_EXISTS(STAT_LED_BLUE)
#error "TEMP_STAT_LEDS requires STAT_LED_RED_PIN and STAT_LED_BLUE_PIN." #error "TEMP_STAT_LEDS requires STAT_LED_RED_PIN or STAT_LED_BLUE_PIN, preferably both."
#endif #endif
/** /**
@ -868,6 +870,23 @@
#endif #endif
#endif #endif
/**
* Auto Fan check for PWM pins
*/
#if HAS_AUTO_FAN && EXTRUDER_AUTO_FAN_SPEED != 255
#define AF_ERR_SUFF "_AUTO_FAN_PIN is not a PWM pin. Set EXTRUDER_AUTO_FAN_SPEED to 255."
#if HAS_AUTO_FAN_0
static_assert(GET_TIMER(E0_AUTO_FAN_PIN), "E0" AF_ERR_SUFF);
#elif HAS_AUTO_FAN_1
static_assert(GET_TIMER(E1_AUTO_FAN_PIN), "E1" AF_ERR_SUFF);
#elif HAS_AUTO_FAN_2
static_assert(GET_TIMER(E2_AUTO_FAN_PIN), "E2" AF_ERR_SUFF);
#elif HAS_AUTO_FAN_3
static_assert(GET_TIMER(E3_AUTO_FAN_PIN), "E3" AF_ERR_SUFF);
#endif
#endif
/** /**
* Make sure only one display is enabled * Make sure only one display is enabled
* *
@ -942,7 +961,7 @@
#else #else
#define COUNT_LCD_13 COUNT_LCD_12 #define COUNT_LCD_13 COUNT_LCD_12
#endif #endif
#if ENABLED(REPRAPWORLD_KEYPAD) #if ENABLED(REPRAPWORLD_KEYPAD) && DISABLED(CARTESIO_UI)
#define COUNT_LCD_14 INCREMENT(COUNT_LCD_13) #define COUNT_LCD_14 INCREMENT(COUNT_LCD_13)
#else #else
#define COUNT_LCD_14 COUNT_LCD_13 #define COUNT_LCD_14 COUNT_LCD_13

25
Marlin/example_configurations/Cartesio/Configuration_adv.h
View file

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN 7 *
#define EXTRUDER_1_AUTO_FAN_PIN 7 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
//#define E0_AUTO_FAN_PIN -1
//#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 35 #define EXTRUDER_AUTO_FAN_TEMPERATURE 35
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

25
Marlin/example_configurations/Felix/Configuration_adv.h
View file

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

25
Marlin/example_configurations/Hephestos/Configuration_adv.h
View file

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

25
Marlin/example_configurations/Hephestos_2/Configuration_adv.h
View file

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN 11 *
#define EXTRUDER_1_AUTO_FAN_PIN 6 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
//#define E0_AUTO_FAN_PIN -1
//#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

25
Marlin/example_configurations/K8200/Configuration_adv.h
View file

@ -211,15 +211,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

25
Marlin/example_configurations/K8400/Configuration_adv.h
View file

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

25
Marlin/example_configurations/RigidBot/Configuration_adv.h
View file

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

25
Marlin/example_configurations/SCARA/Configuration_adv.h
View file

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

25
Marlin/example_configurations/TAZ4/Configuration_adv.h
View file

@ -213,15 +213,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

25
Marlin/example_configurations/WITBOX/Configuration_adv.h
View file

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

25
Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
View file

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins.
#define EXTRUDER_2_AUTO_FAN_PIN -1 * Override those here. Set to -1 to disable unused fans.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

25
Marlin/example_configurations/delta/generic/Configuration_adv.h
View file

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

25
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
View file

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

25
Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
View file

@ -210,15 +210,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

25
Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
View file

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

25
Marlin/example_configurations/makibox/Configuration_adv.h
View file

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

25
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
View file

@ -205,15 +205,22 @@
// @section extruder // @section extruder
// Extruder cooling fans /**
// Configure fan pin outputs to automatically turn on/off when the associated * Extruder cooling fans
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. *
// Multiple extruders can be assigned to the same pin in which case * Extruder auto fans automatically turn on when their extruders'
// the fan will turn on when any selected extruder is above the threshold. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
#define EXTRUDER_0_AUTO_FAN_PIN -1 *
#define EXTRUDER_1_AUTO_FAN_PIN -1 * Your board's pins file specifies the recommended pins. Override those here
#define EXTRUDER_2_AUTO_FAN_PIN -1 * or set to -1 to disable completely.
#define EXTRUDER_3_AUTO_FAN_PIN -1 *
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed

4
Marlin/fastio.h
View file

@ -79,7 +79,7 @@
#define _GET_OUTPUT(IO) ((DIO ## IO ## _DDR & MASK(DIO ## IO ## _PIN)) != 0) #define _GET_OUTPUT(IO) ((DIO ## IO ## _DDR & MASK(DIO ## IO ## _PIN)) != 0)
/// check if pin is an timer /// check if pin is an timer
#define _GET_TIMER(IO) ((DIO ## IO ## _PWM) #define _GET_TIMER(IO) (DIO ## IO ## _PWM)
// why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html // why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
@ -93,6 +93,8 @@
/// set pin as input wrapper /// set pin as input wrapper
#define SET_INPUT(IO) _SET_INPUT(IO) #define SET_INPUT(IO) _SET_INPUT(IO)
/// set pin as input with pullup wrapper
#define SET_INPUT_PULLUP(IO) do{ _SET_INPUT(IO); _WRITE(IO, HIGH); }while(0)
/// set pin as output wrapper /// set pin as output wrapper
#define SET_OUTPUT(IO) _SET_OUTPUT(IO) #define SET_OUTPUT(IO) _SET_OUTPUT(IO)

24
Marlin/pins.h
View file

@ -282,6 +282,22 @@
// Marlin needs to account for pins that equal -1 // Marlin needs to account for pins that equal -1
#define marlinAnalogInputToDigitalPin(p) ((p) == -1 ? -1 : analogInputToDigitalPin(p)) #define marlinAnalogInputToDigitalPin(p) ((p) == -1 ? -1 : analogInputToDigitalPin(p))
//
// Assign auto fan pins if needed
//
#if !defined(E0_AUTO_FAN_PIN) && defined(ORIG_E0_AUTO_FAN_PIN)
#define E0_AUTO_FAN_PIN ORIG_E0_AUTO_FAN_PIN
#endif
#if !defined(E1_AUTO_FAN_PIN) && defined(ORIG_E1_AUTO_FAN_PIN)
#define E1_AUTO_FAN_PIN ORIG_E1_AUTO_FAN_PIN
#endif
#if !defined(E2_AUTO_FAN_PIN) && defined(ORIG_E2_AUTO_FAN_PIN)
#define E2_AUTO_FAN_PIN ORIG_E2_AUTO_FAN_PIN
#endif
#if !defined(E3_AUTO_FAN_PIN) && defined(ORIG_E3_AUTO_FAN_PIN)
#define E3_AUTO_FAN_PIN ORIG_E3_AUTO_FAN_PIN
#endif
// List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those! // List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those!
#define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, E0_MS1_PIN, E0_MS2_PIN, #define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, E0_MS1_PIN, E0_MS2_PIN,
#define _E1_PINS #define _E1_PINS
@ -306,7 +322,7 @@
#endif #endif
#endif #endif
#define _H0_PINS HEATER_0_PIN, EXTRUDER_0_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_0_PIN), #define _H0_PINS HEATER_0_PIN, E0_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_0_PIN),
#define _H1_PINS #define _H1_PINS
#define _H2_PINS #define _H2_PINS
#define _H3_PINS #define _H3_PINS
@ -314,13 +330,13 @@
#if HOTENDS > 1 #if HOTENDS > 1
#undef _H1_PINS #undef _H1_PINS
#define _H1_PINS HEATER_1_PIN, EXTRUDER_1_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_1_PIN), #define _H1_PINS HEATER_1_PIN, E1_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_1_PIN),
#if HOTENDS > 2 #if HOTENDS > 2
#undef _H2_PINS #undef _H2_PINS
#define _H2_PINS HEATER_2_PIN, EXTRUDER_2_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_2_PIN), #define _H2_PINS HEATER_2_PIN, E2_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_2_PIN),
#if HOTENDS > 3 #if HOTENDS > 3
#undef _H3_PINS #undef _H3_PINS
#define _H3_PINS HEATER_3_PIN, EXTRUDER_3_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_3_PIN), #define _H3_PINS HEATER_3_PIN, E3_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_3_PIN),
#if HOTENDS > 4 #if HOTENDS > 4
#undef _H4_PINS #undef _H4_PINS
#define _H4_PINS HEATER_4_PIN, marlinAnalogInputToDigitalPin(TEMP_4_PIN), #define _H4_PINS HEATER_4_PIN, marlinAnalogInputToDigitalPin(TEMP_4_PIN),

16
Marlin/pinsDebug.h
View file

@ -234,17 +234,17 @@ static bool report_pin_name(int8_t pin) {
#if PIN_EXISTS(CONTROLLERFAN) #if PIN_EXISTS(CONTROLLERFAN)
PIN_SAY(CONTROLLERFAN_PIN); PIN_SAY(CONTROLLERFAN_PIN);
#endif #endif
#if PIN_EXISTS(EXTRUDER_0_AUTO_FAN) #if PIN_EXISTS(E0_AUTO_FAN)
PIN_SAY(EXTRUDER_0_AUTO_FAN_PIN); PIN_SAY(E0_AUTO_FAN_PIN);
#endif #endif
#if PIN_EXISTS(EXTRUDER_1_AUTO_FAN) #if PIN_EXISTS(E1_AUTO_FAN)
PIN_SAY(EXTRUDER_1_AUTO_FAN_PIN); PIN_SAY(E1_AUTO_FAN_PIN);
#endif #endif
#if PIN_EXISTS(EXTRUDER_2_AUTO_FAN) #if PIN_EXISTS(E2_AUTO_FAN)
PIN_SAY(EXTRUDER_2_AUTO_FAN_PIN); PIN_SAY(E2_AUTO_FAN_PIN);
#endif #endif
#if PIN_EXISTS(EXTRUDER_3_AUTO_FAN) #if PIN_EXISTS(E3_AUTO_FAN)
PIN_SAY(EXTRUDER_3_AUTO_FAN_PIN); PIN_SAY(E3_AUTO_FAN_PIN);
#endif #endif
#if PIN_EXISTS(HEATER_0) #if PIN_EXISTS(HEATER_0)
PIN_SAY(HEATER_0_PIN); PIN_SAY(HEATER_0_PIN);

8
Marlin/pins_AZTEEG_X3_PRO.h
View file

@ -106,10 +106,10 @@
#define CONTROLLERFAN_PIN 4 // Pin used for the fan to cool motherboard (-1 to disable) #define CONTROLLERFAN_PIN 4 // Pin used for the fan to cool motherboard (-1 to disable)
// Fans/Water Pump to cool the hotend cool side. // Fans/Water Pump to cool the hotend cool side.
#define EXTRUDER_0_AUTO_FAN_PIN 5 #define ORIG_E0_AUTO_FAN_PIN 5
#define EXTRUDER_1_AUTO_FAN_PIN 5 #define ORIG_E1_AUTO_FAN_PIN 5
#define EXTRUDER_2_AUTO_FAN_PIN 5 #define ORIG_E2_AUTO_FAN_PIN 5
#define EXTRUDER_3_AUTO_FAN_PIN 5 #define ORIG_E3_AUTO_FAN_PIN 5
// //
// LCD / Controller // LCD / Controller

8
Marlin/pins_BQ_ZUM_MEGA_3D.h
View file

@ -38,6 +38,14 @@
#define RAMPS_D10_PIN 9 #define RAMPS_D10_PIN 9
#define MOSFET_D_PIN 7 #define MOSFET_D_PIN 7
//
// Auto fans
//
#define ORIG_E0_AUTO_FAN_PIN 11
#define ORIG_E1_AUTO_FAN_PIN 6
#define ORIG_E2_AUTO_FAN_PIN 6
#define ORIG_E3_AUTO_FAN_PIN 6
#include "pins_RAMPS_13.h" #include "pins_RAMPS_13.h"
// //

5
Marlin/pins_CNCONTROLS_11.h
View file

@ -69,6 +69,11 @@
//#define FAN_PIN 7 // common PWM pin for all tools //#define FAN_PIN 7 // common PWM pin for all tools
#define ORIG_E0_AUTO_FAN_PIN 7
#define ORIG_E1_AUTO_FAN_PIN 7
#define ORIG_E2_AUTO_FAN_PIN 7
#define ORIG_E3_AUTO_FAN_PIN 7
// //
// Misc. Functions // Misc. Functions
// //

5
Marlin/pins_CNCONTROLS_12.h
View file

@ -69,6 +69,11 @@
#define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools #define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools
#define ORIG_E0_AUTO_FAN_PIN 7
#define ORIG_E1_AUTO_FAN_PIN 7
#define ORIG_E2_AUTO_FAN_PIN 7
#define ORIG_E3_AUTO_FAN_PIN 7
// //
// Misc. Functions // Misc. Functions
// //

34
Marlin/temperature.cpp
View file

@ -454,7 +454,7 @@ int Temperature::getHeaterPower(int heater) {
#if HAS_AUTO_FAN #if HAS_AUTO_FAN
void Temperature::checkExtruderAutoFans() { void Temperature::checkExtruderAutoFans() {
const int8_t fanPin[] = { EXTRUDER_0_AUTO_FAN_PIN, EXTRUDER_1_AUTO_FAN_PIN, EXTRUDER_2_AUTO_FAN_PIN, EXTRUDER_3_AUTO_FAN_PIN }; const int8_t fanPin[] = { E0_AUTO_FAN_PIN, E1_AUTO_FAN_PIN, E2_AUTO_FAN_PIN, E3_AUTO_FAN_PIN };
const int fanBit[] = { const int fanBit[] = {
0, 0,
AUTO_1_IS_0 ? 0 : 1, AUTO_1_IS_0 ? 0 : 1,
@ -1043,43 +1043,43 @@ void Temperature::init() {
#endif #endif
#if HAS_AUTO_FAN_0 #if HAS_AUTO_FAN_0
#if EXTRUDER_0_AUTO_FAN_PIN == FAN1_PIN #if E0_AUTO_FAN_PIN == FAN1_PIN
SET_OUTPUT(EXTRUDER_0_AUTO_FAN_PIN); SET_OUTPUT(E0_AUTO_FAN_PIN);
#if ENABLED(FAST_PWM_FAN) #if ENABLED(FAST_PWM_FAN)
setPwmFrequency(EXTRUDER_0_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8 setPwmFrequency(E0_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
#endif #endif
#else #else
pinMode(EXTRUDER_0_AUTO_FAN_PIN, OUTPUT); SET_OUTPUT(E0_AUTO_FAN_PIN);
#endif #endif
#endif #endif
#if HAS_AUTO_FAN_1 && !AUTO_1_IS_0 #if HAS_AUTO_FAN_1 && !AUTO_1_IS_0
#if EXTRUDER_1_AUTO_FAN_PIN == FAN1_PIN #if E1_AUTO_FAN_PIN == FAN1_PIN
SET_OUTPUT(EXTRUDER_1_AUTO_FAN_PIN); SET_OUTPUT(E1_AUTO_FAN_PIN);
#if ENABLED(FAST_PWM_FAN) #if ENABLED(FAST_PWM_FAN)
setPwmFrequency(EXTRUDER_1_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8 setPwmFrequency(E1_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
#endif #endif
#else #else
pinMode(EXTRUDER_1_AUTO_FAN_PIN, OUTPUT); SET_OUTPUT(E1_AUTO_FAN_PIN);
#endif #endif
#endif #endif
#if HAS_AUTO_FAN_2 && !AUTO_2_IS_0 && !AUTO_2_IS_1 #if HAS_AUTO_FAN_2 && !AUTO_2_IS_0 && !AUTO_2_IS_1
#if EXTRUDER_2_AUTO_FAN_PIN == FAN1_PIN #if E2_AUTO_FAN_PIN == FAN1_PIN
SET_OUTPUT(EXTRUDER_2_AUTO_FAN_PIN); SET_OUTPUT(E2_AUTO_FAN_PIN);
#if ENABLED(FAST_PWM_FAN) #if ENABLED(FAST_PWM_FAN)
setPwmFrequency(EXTRUDER_2_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8 setPwmFrequency(E2_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
#endif #endif
#else #else
pinMode(EXTRUDER_2_AUTO_FAN_PIN, OUTPUT); SET_OUTPUT(E2_AUTO_FAN_PIN);
#endif #endif
#endif #endif
#if HAS_AUTO_FAN_3 && !AUTO_3_IS_0 && !AUTO_3_IS_1 && !AUTO_3_IS_2 #if HAS_AUTO_FAN_3 && !AUTO_3_IS_0 && !AUTO_3_IS_1 && !AUTO_3_IS_2
#if EXTRUDER_3_AUTO_FAN_PIN == FAN1_PIN #if E3_AUTO_FAN_PIN == FAN1_PIN
SET_OUTPUT(EXTRUDER_3_AUTO_FAN_PIN); SET_OUTPUT(E3_AUTO_FAN_PIN);
#if ENABLED(FAST_PWM_FAN) #if ENABLED(FAST_PWM_FAN)
setPwmFrequency(EXTRUDER_3_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8 setPwmFrequency(E3_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
#endif #endif
#else #else
pinMode(EXTRUDER_3_AUTO_FAN_PIN, OUTPUT); SET_OUTPUT(E3_AUTO_FAN_PIN);
#endif #endif
#endif #endif

24
Marlin/ultralcd.cpp
View file

@ -2390,6 +2390,7 @@ void kill_screen(const char* lcd_msg) {
case X_AXIS: lcd_move_x(); break; case X_AXIS: lcd_move_x(); break;
case Y_AXIS: lcd_move_y(); break; case Y_AXIS: lcd_move_y(); break;
case Z_AXIS: lcd_move_z(); case Z_AXIS: lcd_move_z();
default: break;
} }
} }
static void reprapworld_keypad_move_z_up() { _reprapworld_keypad_move(Z_AXIS, 1); } static void reprapworld_keypad_move_z_up() { _reprapworld_keypad_move(Z_AXIS, 1); }
@ -2490,11 +2491,9 @@ void lcd_init() {
#endif #endif
#if ENABLED(REPRAPWORLD_KEYPAD) #if ENABLED(REPRAPWORLD_KEYPAD)
pinMode(SHIFT_CLK, OUTPUT); SET_OUTPUT(SHIFT_CLK);
pinMode(SHIFT_LD, OUTPUT); OUT_WRITE(SHIFT_LD, HIGH);
pinMode(SHIFT_OUT, INPUT); SET_INPUT_PULLUP(SHIFT_OUT);
WRITE(SHIFT_OUT, HIGH);
WRITE(SHIFT_LD, HIGH);
#endif #endif
#if BUTTON_EXISTS(UP) #if BUTTON_EXISTS(UP)
@ -2513,16 +2512,13 @@ void lcd_init() {
#else // !NEWPANEL #else // !NEWPANEL
#if ENABLED(SR_LCD_2W_NL) // Non latching 2 wire shift register #if ENABLED(SR_LCD_2W_NL) // Non latching 2 wire shift register
pinMode(SR_DATA_PIN, OUTPUT); SET_OUTPUT(SR_DATA_PIN);
pinMode(SR_CLK_PIN, OUTPUT); SET_OUTPUT(SR_CLK_PIN);
#elif defined(SHIFT_CLK) #elif defined(SHIFT_CLK)
pinMode(SHIFT_CLK, OUTPUT); SET_OUTPUT(SHIFT_CLK);
pinMode(SHIFT_LD, OUTPUT); OUT_WRITE(SHIFT_LD, HIGH);
pinMode(SHIFT_EN, OUTPUT); OUT_WRITE(SHIFT_EN, LOW);
pinMode(SHIFT_OUT, INPUT); SET_INPUT_PULLUP(SHIFT_OUT);
WRITE(SHIFT_OUT, HIGH);
WRITE(SHIFT_LD, HIGH);
WRITE(SHIFT_EN, LOW);
#endif // SR_LCD_2W_NL #endif // SR_LCD_2W_NL
#endif // !NEWPANEL #endif // !NEWPANEL