From c421ffd52027d56e3b8db96a9c2a84055b9d1e3a Mon Sep 17 00:00:00 2001 From: CONSULitAS Date: Wed, 4 Feb 2015 00:19:18 +0100 Subject: [PATCH] K8200: Example Configuration_adv.h back in sync Example Configuration_adv.h for K8200 back in sync * Configuration_adv.h: rebased and added missing changes for 4th extruder --- .../K8200/Configuration_adv.h | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h index e54fe3b781..a7f55854cd 100644 --- a/Marlin/example_configurations/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/K8200/Configuration_adv.h @@ -75,9 +75,10 @@ // extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. // Multiple extruders can be assigned to the same pin in which case // the fan will turn on when any selected extruder is above the threshold. -#define EXTRUDER_0_AUTO_FAN_PIN -1 -#define EXTRUDER_1_AUTO_FAN_PIN -1 -#define EXTRUDER_2_AUTO_FAN_PIN -1 +#define EXTRUDER_0_AUTO_FAN_PIN -1 +#define EXTRUDER_1_AUTO_FAN_PIN -1 +#define EXTRUDER_2_AUTO_FAN_PIN -1 +#define EXTRUDER_3_AUTO_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed @@ -483,6 +484,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define THERMISTORHEATER_2 TEMP_SENSOR_2 #define HEATER_2_USES_THERMISTOR #endif +#if TEMP_SENSOR_3 > 0 + #define THERMISTORHEATER_3 TEMP_SENSOR_3 + #define HEATER_3_USES_THERMISTOR +#endif #if TEMP_SENSOR_BED > 0 #define THERMISTORBED TEMP_SENSOR_BED #define BED_USES_THERMISTOR @@ -496,6 +501,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st #if TEMP_SENSOR_2 == -1 #define HEATER_2_USES_AD595 #endif +#if TEMP_SENSOR_3 == -1 + #define HEATER_3_USES_AD595 +#endif #if TEMP_SENSOR_BED == -1 #define BED_USES_AD595 #endif @@ -514,6 +522,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st #undef HEATER_2_MINTEMP #undef HEATER_2_MAXTEMP #endif +#if TEMP_SENSOR_3 == 0 + #undef HEATER_3_MINTEMP + #undef HEATER_3_MAXTEMP +#endif #if TEMP_SENSOR_BED == 0 #undef BED_MINTEMP #undef BED_MAXTEMP