Update Travis Tests to run platforms in parallel (#11256)
This commit is contained in:
Chris Pepper
Scott Lahteine
parent
e486326910
commit
c43793aa1e
447
.travis.yml
447
.travis.yml
|
|
@ -16,7 +16,11 @@ cache:
|
|||
- "~/.platformio"
|
||||
|
||||
env:
|
||||
- TEST_PLATFORM="-e megaatmega2560"
|
||||
- TEST_PLATFORM="megaatmega2560"
|
||||
- TEST_PLATFORM="LPC1768"
|
||||
- TEST_PLATFORM="DUE"
|
||||
- TEST_PLATFORM="STM32F1"
|
||||
- TEST_PLATFORM="teensy35"
|
||||
|
||||
before_install:
|
||||
#
|
||||
|
|
@ -26,6 +30,8 @@ before_install:
|
|||
# Publish the buildroot script folder
|
||||
- chmod +x ${TRAVIS_BUILD_DIR}/buildroot/bin/*
|
||||
- export PATH=${TRAVIS_BUILD_DIR}/buildroot/bin/:${PATH}
|
||||
- chmod +x ${TRAVIS_BUILD_DIR}/buildroot/share/tests/*
|
||||
- export PATH=${TRAVIS_BUILD_DIR}/buildroot/share/tests/:${PATH}
|
||||
|
||||
install:
|
||||
#- pip install -U platformio
|
||||
|
|
@ -43,441 +49,4 @@ before_script:
|
|||
- cat ${TRAVIS_BUILD_DIR}/Marlin/src/inc/_Version.h
|
||||
#
|
||||
script:
|
||||
#
|
||||
# Backup pins_RAMPS.h
|
||||
#
|
||||
- cp Marlin/src/pins/pins_RAMPS.h Marlin/src/pins/pins_RAMPS.h.backup
|
||||
#
|
||||
# Build with the default configurations
|
||||
#
|
||||
- restore_configs
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Test 2 extruders (one MAX6675) and heated bed on basic RAMPS 1.4
|
||||
# Test a "Fix Mounted" Probe with Safe Homing, some arc options,
|
||||
# linear bed leveling, M48, leveling debug, and firmware retraction.
|
||||
#
|
||||
- opt_set MOTHERBOARD BOARD_RAMPS_14_EEB
|
||||
- opt_set EXTRUDERS 2
|
||||
- opt_set TEMP_SENSOR_0 -2
|
||||
- opt_set TEMP_SENSOR_1 1
|
||||
- opt_set TEMP_SENSOR_BED 1
|
||||
- opt_set POWER_SUPPLY 1
|
||||
- opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING
|
||||
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS PINS_DEBUGGING
|
||||
- opt_enable BLINKM PCA9632 RGB_LED NEOPIXEL_LED AUTO_POWER_CONTROL NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR
|
||||
- opt_enable AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
|
||||
- opt_enable_adv ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS POWER_LOSS_RECOVERY
|
||||
- opt_enable_adv FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING
|
||||
- opt_set GRID_MAX_POINTS_X 16
|
||||
- opt_set_adv FANMUX0_PIN 53
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Test a probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
|
||||
- opt_set EXTRUDERS 5
|
||||
- opt_set TEMP_SENSOR_1 1
|
||||
- opt_set TEMP_SENSOR_2 5
|
||||
- opt_set TEMP_SENSOR_3 20
|
||||
- opt_set TEMP_SENSOR_4 999
|
||||
- opt_set TEMP_SENSOR_BED 1
|
||||
- opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION
|
||||
- opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
|
||||
- opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI
|
||||
- opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME JUNCTION_DEVIATION
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language
|
||||
#
|
||||
- opt_enable Z_PROBE_SLED SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
|
||||
- opt_set LCD_LANGUAGE jp-kana
|
||||
- opt_disable SEGMENT_LEVELED_MOVES
|
||||
- opt_enable_adv BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Test a Servo Probe
|
||||
# ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable NUM_SERVOS Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE
|
||||
- opt_set NUM_SERVOS 1
|
||||
- opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT
|
||||
- opt_enable_adv NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Test MESH_BED_LEVELING feature, with LCD
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable MESH_BED_LEVELING G26_MESH_EDITING MESH_G28_REST_ORIGIN LCD_BED_LEVELING ULTIMAKERCONTROLLER
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Test MINIRAMBO for PWM_MOTOR_CURRENT
|
||||
# PROBE_MANUALLY feature, with LCD support,
|
||||
# ULTIMAKERCONTROLLER, FILAMENT_LCD_DISPLAY, FILAMENT_WIDTH_SENSOR,
|
||||
# PRINTCOUNTER, NOZZLE_PARK_FEATURE, NOZZLE_CLEAN_FEATURE, PCA9632,
|
||||
# Z_DUAL_ENDSTOPS, BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS,
|
||||
# ADVANCED_PAUSE_FEATURE, ADVANCED_PAUSE_CONTINUOUS_PURGE, PARK_HEAD_ON_PAUSE, LCD_INFO_MENU,
|
||||
# EEPROM_SETTINGS, EEPROM_CHITCHAT, M100_FREE_MEMORY_WATCHER,
|
||||
# INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_MINIRAMBO
|
||||
- opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR G26_MESH_EDITING LCD_BED_LEVELING ULTIMAKERCONTROLLER
|
||||
- opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT
|
||||
- opt_enable ULTIMAKERCONTROLLER SDSUPPORT
|
||||
- opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632
|
||||
- opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS
|
||||
- opt_enable_adv ADVANCED_PAUSE_FEATURE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES PARK_HEAD_ON_PAUSE LCD_INFO_MENU M114_DETAIL
|
||||
- opt_set_adv PWM_MOTOR_CURRENT {1300,1300,1250}
|
||||
- opt_set_adv I2C_SLAVE_ADDRESS 63
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Mixing Extruder with 5 steppers, Cyrillic
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
|
||||
- opt_enable MIXING_EXTRUDER CR10_STOCKDISPLAY
|
||||
- opt_set MIXING_STEPPERS 5
|
||||
- opt_set LCD_LANGUAGE ru
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Test DUAL_X_CARRIAGE
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_RUMBA
|
||||
- opt_set EXTRUDERS 2
|
||||
- opt_set TEMP_SENSOR_1 1
|
||||
- opt_enable USE_XMAX_PLUG
|
||||
- opt_enable_adv DUAL_X_CARRIAGE
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_set MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D
|
||||
#- opt_set LCD_FEEDBACK_FREQUENCY_DURATION_MS 10
|
||||
#- opt_set LCD_FEEDBACK_FREQUENCY_HZ 100
|
||||
#- opt_enable BQ_LCD_SMART_CONTROLLER SPEAKER
|
||||
#
|
||||
# Test SWITCHING_EXTRUDER
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_RUMBA
|
||||
- opt_set EXTRUDERS 2
|
||||
- opt_enable NUM_SERVOS
|
||||
- opt_set NUM_SERVOS 1
|
||||
- opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Enable COREXY
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable COREXY
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Test many less common options
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable COREYX
|
||||
- opt_set_adv FAN_MIN_PWM 50
|
||||
- opt_set_adv FAN_KICKSTART_TIME 100
|
||||
- opt_set_adv XY_FREQUENCY_LIMIT 15
|
||||
- opt_enable_adv SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME
|
||||
- opt_enable_adv ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK
|
||||
- opt_enable_adv VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL
|
||||
- opt_enable_adv EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
|
||||
- opt_enable_adv MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
|
||||
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
|
||||
- opt_enable FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR
|
||||
- opt_enable ENDSTOP_INTERRUPTS_FEATURE FAN_SOFT_PWM SDSUPPORT
|
||||
- opt_enable USE_XMAX_PLUG
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
######## Other Standard LCD/Panels ##############
|
||||
#
|
||||
# ULTRA_LCD
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable ULTRA_LCD
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# DOGLCD
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable DOGLCD
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# MAKRPANEL
|
||||
# Needs to use Melzi and Sanguino hardware
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable MAKRPANEL
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# REPRAP_DISCOUNT_SMART_CONTROLLER, SDSUPPORT, BABYSTEPPING, RIGIDBOARD_V2, and DAC_MOTOR_CURRENT_DEFAULT
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_set MOTHERBOARD BOARD_RIGIDBOARD_V2
|
||||
#- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
# #
|
||||
# G3D_PANEL with SDCARD_SORT_ALPHA and STATUS_MESSAGE_SCROLLING
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable G3D_PANEL SDSUPPORT
|
||||
#- opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES
|
||||
#- opt_set_adv SDSORT_GCODE true
|
||||
#- opt_set_adv SDSORT_USES_RAM true
|
||||
#- opt_set_adv SDSORT_USES_STACK true
|
||||
#- opt_set_adv SDSORT_CACHE_NAMES true
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Test a full-featured CR-10S config
|
||||
#
|
||||
- use_example_configs Creality/CR-10S
|
||||
- opt_enable SHOW_CUSTOM_BOOTSCREEN
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# REPRAPWORLD_KEYPAD
|
||||
#
|
||||
# Cant find configuration details to get it to compile
|
||||
#- restore_configs
|
||||
#- opt_enable ULTRA_LCD REPRAPWORLD_KEYPAD REPRAPWORLD_KEYPAD_MOVE_STEP
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# RA_CONTROL_PANEL
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable RA_CONTROL_PANEL PINS_DEBUGGING
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
######## I2C LCD/PANELS ##############
|
||||
#
|
||||
# !!!ATTENTION!!!
|
||||
# Most I2C configurations are failing at the moment because they require
|
||||
# a different Liquid Crystal library "LiquidTWI2".
|
||||
#
|
||||
# LCD_SAINSMART_I2C_1602
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable LCD_SAINSMART_I2C_1602
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# LCD_I2C_PANELOLU2
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable LCD_I2C_PANELOLU2
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# LCD_I2C_VIKI
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable LCD_I2C_VIKI
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# LCM1602
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable LCM1602
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Language files test with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
|
||||
#- for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}; done
|
||||
#
|
||||
#- restore_configs
|
||||
#- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT
|
||||
#- for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}; done
|
||||
#
|
||||
#
|
||||
######## Example Configurations ##############
|
||||
#
|
||||
# BQ Hephestos 2
|
||||
#- restore_configs
|
||||
#- use_example_configs Hephestos_2
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Delta Config (generic) + ABL bilinear + PROBE_MANUALLY
|
||||
- use_example_configs delta/generic
|
||||
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR PROBE_MANUALLY
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS
|
||||
#
|
||||
- use_example_configs delta/generic
|
||||
- opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT
|
||||
- opt_enable OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Delta Config (FLSUN AC because it's complex)
|
||||
#
|
||||
- use_example_configs delta/FLSUN/auto_calibrate
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Makibox Config need to check board type for Teensy++ 2.0
|
||||
#
|
||||
#- use_example_configs makibox
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# SCARA with TMC2130
|
||||
#
|
||||
- use_example_configs SCARA
|
||||
- opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER
|
||||
- opt_enable_adv HAVE_TMC2130 X_IS_TMC2130 Y_IS_TMC2130 Z_IS_TMC2130
|
||||
- opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD SENSORLESS_HOMING
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# TMC2208 Config
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable_adv HAVE_TMC2208 X_IS_TMC2208 Y_IS_TMC2208 Z_IS_TMC2208
|
||||
- opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD TMC_DEBUG
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# tvrrug Config need to check board type for sanguino atmega644p
|
||||
#
|
||||
#- use_example_configs tvrrug/Round2
|
||||
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
#
|
||||
######## Board Types #############
|
||||
#
|
||||
# To be added in nightly test branch
|
||||
#
|
||||
|
||||
- export TEST_PLATFORM="-e teensy35"
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_TEENSY35_36
|
||||
- update_defaults
|
||||
- cp Marlin/src/pins/pins_RAMPS.h Marlin/src/pins/pins_RAMPS.h.backup
|
||||
#
|
||||
# Test Teensy3.5 with default config
|
||||
#
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Test as many features together as possible
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set EXTRUDERS 2
|
||||
- opt_set TEMP_SENSOR_0 1
|
||||
- opt_set TEMP_SENSOR_1 5
|
||||
- opt_set TEMP_SENSOR_BED 1
|
||||
- opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
|
||||
- opt_enable FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY
|
||||
- opt_enable FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE
|
||||
- opt_enable BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY
|
||||
- opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT M100_FREE_MEMORY_WATCHER
|
||||
- opt_enable_adv ADVANCED_PAUSE_FEATURE LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA PARK_HEAD_ON_PAUSE
|
||||
- opt_set_adv I2C_SLAVE_ADDRESS 63
|
||||
- opt_set GRID_MAX_POINTS_X 16
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Test a Sled Z Probe with Linear leveling
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable Z_PROBE_SLED
|
||||
- opt_enable AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Test a Servo Probe
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable NUM_SERVOS Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE
|
||||
- opt_set NUM_SERVOS 1
|
||||
- opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
|
||||
#
|
||||
- opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
|
||||
- opt_enable_adv EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Test MESH_BED_LEVELING feature, with LCD
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable MESH_BED_LEVELING MESH_G28_REST_ORIGIN MANUAL_BED_LEVELING ULTIMAKERCONTROLLER
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Mixing Extruder
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1
|
||||
- opt_set MIXING_STEPPERS 2
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Test SWITCHING_EXTRUDER
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set EXTRUDERS 2
|
||||
- opt_enable NUM_SERVOS
|
||||
- opt_set NUM_SERVOS 1
|
||||
- opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Enable COREXY
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable COREXY
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Enable COREXZ
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable COREXZ
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Enable Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable_adv Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
|
||||
- pins_set RAMPS X_MAX_PIN -1
|
||||
- opt_add_adv Z2_MAX_PIN 2
|
||||
- opt_enable USE_XMAX_PLUG
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
|
||||
#############################
|
||||
# DUE default config test
|
||||
#############################
|
||||
|
||||
- export TEST_PLATFORM="-e DUE"
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_RAMPS4DUE_EFB
|
||||
- opt_enable S_CURVE_ACCELERATION
|
||||
- opt_set E0_AUTO_FAN_PIN 8
|
||||
- opt_set EXTRUDER_AUTO_FAN_SPEED 100
|
||||
- update_defaults
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
|
||||
#############################
|
||||
# LPC1768 default config test
|
||||
#############################
|
||||
|
||||
- export TEST_PLATFORM="-e LPC1768"
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
|
||||
- update_defaults
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Enable VIKI2, SDSUPPORT
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
|
||||
- update_defaults
|
||||
- opt_enable VIKI2 SDSUPPORT
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
|
||||
#############################
|
||||
# STM32F1 config test
|
||||
#############################
|
||||
|
||||
- export TEST_PLATFORM="-e STM32F1"
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_STM32F1R
|
||||
- update_defaults
|
||||
- opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
- start_tests ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
|
|
|
|||
24
buildroot/bin/env_backup
Executable file
24
buildroot/bin/env_backup
Executable file
|
|
@ -0,0 +1,24 @@
|
|||
#!/usr/bin/env bash
|
||||
|
||||
if [ ! -z "$1" ]; then
|
||||
cd $1
|
||||
fi
|
||||
|
||||
if [ -d ".test" ]; then
|
||||
printf "\033[0;31mEnvironment backup already exists!\033[0m\n"
|
||||
else
|
||||
mkdir .test
|
||||
cp Marlin/Configuration.h .test/Configuration.h
|
||||
cp Marlin/Configuration_adv.h .test/Configuration_adv.h
|
||||
|
||||
if [ -f Marlin/_Bootscreen.h ]; then
|
||||
cp Marlin/_Bootscreen.h .test/_Bootscreen.h
|
||||
fi
|
||||
|
||||
if [ -f Marlin/_Statusscreen.h ]; then
|
||||
cp Marlin/_Statusscreen.h .test/_Statusscreen.h
|
||||
fi
|
||||
|
||||
cp -r Marlin/src/pins .test/pins
|
||||
printf "\033[0;32mEnvironment Backup created\033[0m\n"
|
||||
fi
|
||||
29
buildroot/bin/env_clean
Executable file
29
buildroot/bin/env_clean
Executable file
|
|
@ -0,0 +1,29 @@
|
|||
#!/usr/bin/env bash
|
||||
|
||||
if [ -d ".pioenvs" ]; then
|
||||
rm -r .pioenvs
|
||||
fi
|
||||
|
||||
if [ -d ".piolibdeps" ]; then
|
||||
rm -r .piolibdeps
|
||||
fi
|
||||
|
||||
if [ -d ".piolib" ]; then
|
||||
rm -r .piolib
|
||||
fi
|
||||
|
||||
if [ ! -z "$1" ]; then
|
||||
if [ $1 = "--deep" ]; then
|
||||
if [ -d "~/.platformio/packages" ]; then
|
||||
rm -r ~/.platformio/packages/*
|
||||
fi
|
||||
|
||||
if [ -d "~/.platformio/platforms" ]; then
|
||||
rm -r ~/.platformio/platforms/*
|
||||
fi
|
||||
|
||||
if [ -d "~/.platformio/.cache" ]; then
|
||||
rm -r ~/.platformio/.cache/*
|
||||
fi
|
||||
fi
|
||||
fi
|
||||
30
buildroot/bin/env_restore
Executable file
30
buildroot/bin/env_restore
Executable file
|
|
@ -0,0 +1,30 @@
|
|||
#!/usr/bin/env bash
|
||||
|
||||
if [ ! -z "$1" ]; then
|
||||
cd $1
|
||||
fi
|
||||
|
||||
if [ -d ".test" ]; then
|
||||
cp .test/Configuration.h Marlin/Configuration.h
|
||||
cp .test/Configuration_adv.h Marlin/Configuration_adv.h
|
||||
rm .test/Configuration.h
|
||||
rm .test/Configuration_adv.h
|
||||
|
||||
if [ -f .test/_Bootscreen.h ]; then
|
||||
cp .test/_Bootscreen.h Marlin/_Bootscreen.h
|
||||
rm .test/_Bootscreen.h
|
||||
fi
|
||||
|
||||
if [ -f .test/_Statusscreen.h ]; then
|
||||
cp .test/_Statusscreen.h Marlin/_Statusscreen.h
|
||||
rm .test/_Statusscreen.h
|
||||
fi
|
||||
|
||||
cp -r .test/pins Marlin/src
|
||||
rm -r .test/pins
|
||||
|
||||
rmdir .test
|
||||
printf "\033[0;32mEnvironment Restored\033[0m\n"
|
||||
else
|
||||
printf "\033[0;31mEnvironment Backup not available!\033[0m\n"
|
||||
fi
|
||||
|
|
@ -2,8 +2,16 @@
|
|||
|
||||
cp Marlin/src/config/default/Configuration.h Marlin/Configuration.h
|
||||
cp Marlin/src/config/default/Configuration_adv.h Marlin/Configuration_adv.h
|
||||
cp Marlin/src/pins/pins_RAMPS.h.backup Marlin/src/pins/pins_RAMPS.h
|
||||
|
||||
if [ -f Marlin/src/config/_Bootscreen.h ]; then
|
||||
rm Marlin/src/config/_Bootscreen.h
|
||||
if [ -f Marlin/src/pins/pins_RAMPS.h.backup ]; then
|
||||
cp Marlin/src/pins/pins_RAMPS.h.backup Marlin/src/pins/pins_RAMPS.h
|
||||
rm Marlin/src/pins/pins_RAMPS.h.backup
|
||||
fi
|
||||
|
||||
if [ -f Marlin/_Bootscreen.h ]; then
|
||||
rm Marlin/_Bootscreen.h
|
||||
fi
|
||||
|
||||
if [ -f Marlin/_Statusscreen.h ]; then
|
||||
rm Marlin/_Statusscreen.h
|
||||
fi
|
||||
|
|
|
|||
11
buildroot/share/tests/DUE_tests
Executable file
11
buildroot/share/tests/DUE_tests
Executable file
|
|
@ -0,0 +1,11 @@
|
|||
#!/usr/bin/env bash
|
||||
|
||||
# exit on first failure
|
||||
set -e
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_RAMPS4DUE_EFB
|
||||
opt_enable S_CURVE_ACCELERATION
|
||||
opt_set E0_AUTO_FAN_PIN 8
|
||||
opt_set EXTRUDER_AUTO_FAN_SPEED 100
|
||||
exec_test $1 $2 "RAMPS4DUE_EFB S_CURVE_ACCELERATION"
|
||||
21
buildroot/share/tests/LPC1768_tests
Executable file
21
buildroot/share/tests/LPC1768_tests
Executable file
|
|
@ -0,0 +1,21 @@
|
|||
#!/usr/bin/env bash
|
||||
|
||||
# exit on first failure
|
||||
set -e
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
|
||||
exec_test $1 $2 "Build Re-ARM Default Configuration"
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
|
||||
opt_enable VIKI2 SDSUPPORT
|
||||
exec_test $1 $2 "VIKI2 and SDSUPPORT"
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_MKS_SBASE
|
||||
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
|
||||
exec_test $1 $2 "MKS SBASE RRDFG SDSUPPORT"
|
||||
|
||||
#clean up
|
||||
restore_configs
|
||||
12
buildroot/share/tests/STM32F1_tests
Executable file
12
buildroot/share/tests/STM32F1_tests
Executable file
|
|
@ -0,0 +1,12 @@
|
|||
#!/usr/bin/env bash
|
||||
|
||||
# exit on first failure
|
||||
set -e
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_STM32F1R
|
||||
opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT
|
||||
exec_test $1 $2 "STM32F1R EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT"
|
||||
|
||||
#cleanup
|
||||
restore_configs
|
||||
309
buildroot/share/tests/megaatmega2560_tests
Executable file
309
buildroot/share/tests/megaatmega2560_tests
Executable file
|
|
@ -0,0 +1,309 @@
|
|||
#!/usr/bin/env bash
|
||||
|
||||
# exit on first failure
|
||||
set -e
|
||||
|
||||
#
|
||||
# Backup pins_RAMPS.h
|
||||
#
|
||||
cp Marlin/src/pins/pins_RAMPS.h Marlin/src/pins/pins_RAMPS.h.backup
|
||||
#
|
||||
# Build with the default configurations
|
||||
#
|
||||
restore_configs
|
||||
exec_test $1 $2 "Default Configuration"
|
||||
#
|
||||
# Test 2 extruders (one MAX6675) and heated bed on basic RAMPS 1.4
|
||||
# Test a "Fix Mounted" Probe with Safe Homing, some arc options,
|
||||
# linear bed leveling, M48, leveling debug, and firmware retraction.
|
||||
#
|
||||
opt_set MOTHERBOARD BOARD_RAMPS_14_EEB
|
||||
opt_set EXTRUDERS 2
|
||||
opt_set TEMP_SENSOR_0 -2
|
||||
opt_set TEMP_SENSOR_1 1
|
||||
opt_set TEMP_SENSOR_BED 1
|
||||
opt_set POWER_SUPPLY 1
|
||||
opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING
|
||||
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS PINS_DEBUGGING
|
||||
opt_enable BLINKM PCA9632 RGB_LED NEOPIXEL_LED AUTO_POWER_CONTROL NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR
|
||||
opt_enable AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
|
||||
opt_enable_adv ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS POWER_LOSS_RECOVERY
|
||||
opt_enable_adv FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING
|
||||
opt_set GRID_MAX_POINTS_X 16
|
||||
opt_set_adv FANMUX0_PIN 53
|
||||
exec_test $1 $2 "Extruders(2) MAX6675 Fixed Probe etc"
|
||||
#
|
||||
# Test a probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders
|
||||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
|
||||
opt_set EXTRUDERS 5
|
||||
opt_set TEMP_SENSOR_1 1
|
||||
opt_set TEMP_SENSOR_2 5
|
||||
opt_set TEMP_SENSOR_3 20
|
||||
opt_set TEMP_SENSOR_4 999
|
||||
opt_set TEMP_SENSOR_BED 1
|
||||
opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION
|
||||
opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
|
||||
opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI
|
||||
opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME JUNCTION_DEVIATION
|
||||
exec_test $1 $2 "Probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders"
|
||||
#
|
||||
# Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language
|
||||
#
|
||||
opt_enable Z_PROBE_SLED SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
|
||||
opt_set LCD_LANGUAGE jp-kana
|
||||
opt_disable SEGMENT_LEVELED_MOVES
|
||||
opt_enable_adv BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING
|
||||
exec_test $1 $2 "Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language"
|
||||
#
|
||||
# Test a Servo Probe
|
||||
# ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
|
||||
#
|
||||
restore_configs
|
||||
opt_enable NUM_SERVOS Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE
|
||||
opt_set NUM_SERVOS 1
|
||||
opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT
|
||||
opt_enable_adv NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET
|
||||
exec_test $1 $2 "Servo Probe with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS etc"
|
||||
#
|
||||
# Test MESH_BED_LEVELING feature, with LCD
|
||||
#
|
||||
restore_configs
|
||||
opt_enable MESH_BED_LEVELING G26_MESH_EDITING MESH_G28_REST_ORIGIN LCD_BED_LEVELING ULTIMAKERCONTROLLER
|
||||
exec_test $1 $2 "MESH_BED_LEVELING feature, with LCD"
|
||||
#
|
||||
# Test MINIRAMBO for PWM_MOTOR_CURRENT
|
||||
# PROBE_MANUALLY feature, with LCD support,
|
||||
# ULTIMAKERCONTROLLER, FILAMENT_LCD_DISPLAY, FILAMENT_WIDTH_SENSOR,
|
||||
# PRINTCOUNTER, NOZZLE_PARK_FEATURE, NOZZLE_CLEAN_FEATURE, PCA9632,
|
||||
# Z_DUAL_ENDSTOPS, BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS,
|
||||
# ADVANCED_PAUSE_FEATURE, ADVANCED_PAUSE_CONTINUOUS_PURGE, PARK_HEAD_ON_PAUSE, LCD_INFO_MENU,
|
||||
# EEPROM_SETTINGS, EEPROM_CHITCHAT, M100_FREE_MEMORY_WATCHER,
|
||||
# INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT
|
||||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_MINIRAMBO
|
||||
opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR G26_MESH_EDITING LCD_BED_LEVELING ULTIMAKERCONTROLLER
|
||||
opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT
|
||||
opt_enable ULTIMAKERCONTROLLER SDSUPPORT
|
||||
opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632
|
||||
opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS
|
||||
opt_enable_adv ADVANCED_PAUSE_FEATURE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES PARK_HEAD_ON_PAUSE LCD_INFO_MENU M114_DETAIL
|
||||
opt_set_adv PWM_MOTOR_CURRENT {1300,1300,1250}
|
||||
opt_set_adv I2C_SLAVE_ADDRESS 63
|
||||
exec_test $1 $2 "MINIRAMBO for PWM_MOTOR_CURRENT etc"
|
||||
#
|
||||
# Mixing Extruder with 5 steppers, Cyrillic
|
||||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
|
||||
opt_enable MIXING_EXTRUDER CR10_STOCKDISPLAY
|
||||
opt_set MIXING_STEPPERS 5
|
||||
opt_set LCD_LANGUAGE ru
|
||||
exec_test $1 $2 "Mixing Extruder with 5 steppers, Cyrillic"
|
||||
#
|
||||
# Test DUAL_X_CARRIAGE
|
||||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_RUMBA
|
||||
opt_set EXTRUDERS 2
|
||||
opt_set TEMP_SENSOR_1 1
|
||||
opt_enable USE_XMAX_PLUG
|
||||
opt_enable_adv DUAL_X_CARRIAGE
|
||||
exec_test $1 $2 "DUAL_X_CARRIAGE"
|
||||
#
|
||||
# Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER
|
||||
#
|
||||
#restore_configs
|
||||
#opt_set MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D
|
||||
#opt_set LCD_FEEDBACK_FREQUENCY_DURATION_MS 10
|
||||
#opt_set LCD_FEEDBACK_FREQUENCY_HZ 100
|
||||
#opt_enable BQ_LCD_SMART_CONTROLLER SPEAKER
|
||||
#
|
||||
# Test SWITCHING_EXTRUDER
|
||||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_RUMBA
|
||||
opt_set EXTRUDERS 2
|
||||
opt_enable NUM_SERVOS
|
||||
opt_set NUM_SERVOS 1
|
||||
opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
|
||||
exec_test $1 $2 "SWITCHING_EXTRUDER"
|
||||
#
|
||||
# Enable COREXY
|
||||
#
|
||||
#restore_configs
|
||||
#opt_enable COREXY
|
||||
#exec_test $1 $2 "Stuff"
|
||||
#
|
||||
# Test many less common options
|
||||
#
|
||||
restore_configs
|
||||
opt_enable COREYX
|
||||
opt_set_adv FAN_MIN_PWM 50
|
||||
opt_set_adv FAN_KICKSTART_TIME 100
|
||||
opt_set_adv XY_FREQUENCY_LIMIT 15
|
||||
opt_enable_adv SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME
|
||||
opt_enable_adv ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK
|
||||
opt_enable_adv VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL
|
||||
opt_enable_adv EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
|
||||
opt_enable_adv MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
|
||||
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
|
||||
opt_enable FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR
|
||||
opt_enable ENDSTOP_INTERRUPTS_FEATURE FAN_SOFT_PWM SDSUPPORT
|
||||
opt_enable USE_XMAX_PLUG
|
||||
exec_test $1 $2 "Many less common options"
|
||||
#
|
||||
######## Other Standard LCD/Panels ##############
|
||||
#
|
||||
# ULTRA_LCD
|
||||
#
|
||||
#restore_configs
|
||||
#opt_enable ULTRA_LCD
|
||||
#exec_test $1 $2 "Stuff"
|
||||
#
|
||||
# DOGLCD
|
||||
#
|
||||
#restore_configs
|
||||
#opt_enable DOGLCD
|
||||
#exec_test $1 $2 "Stuff"
|
||||
#
|
||||
# MAKRPANEL
|
||||
# Needs to use Melzi and Sanguino hardware
|
||||
#
|
||||
#restore_configs
|
||||
#opt_enable MAKRPANEL
|
||||
#exec_test $1 $2 "Stuff"
|
||||
#
|
||||
# REPRAP_DISCOUNT_SMART_CONTROLLER, SDSUPPORT, BABYSTEPPING, RIGIDBOARD_V2, and DAC_MOTOR_CURRENT_DEFAULT
|
||||
#
|
||||
#restore_configs
|
||||
#opt_set MOTHERBOARD BOARD_RIGIDBOARD_V2
|
||||
#opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
|
||||
#exec_test $1 $2 "Stuff"
|
||||
# #
|
||||
# G3D_PANEL with SDCARD_SORT_ALPHA and STATUS_MESSAGE_SCROLLING
|
||||
#
|
||||
#restore_configs
|
||||
#opt_enable G3D_PANEL SDSUPPORT
|
||||
#opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES
|
||||
#opt_set_adv SDSORT_GCODE true
|
||||
#opt_set_adv SDSORT_USES_RAM true
|
||||
#opt_set_adv SDSORT_USES_STACK true
|
||||
#opt_set_adv SDSORT_CACHE_NAMES true
|
||||
#exec_test $1 $2 "Stuff"
|
||||
#
|
||||
# Test a full-featured CR-10S config
|
||||
#
|
||||
use_example_configs Creality/CR-10S
|
||||
opt_enable SHOW_CUSTOM_BOOTSCREEN
|
||||
exec_test $1 $2 "Full-featured CR-10S config"
|
||||
#
|
||||
# REPRAPWORLD_KEYPAD
|
||||
#
|
||||
# Cant find configuration details to get it to compile
|
||||
#restore_configs
|
||||
#opt_enable ULTRA_LCD REPRAPWORLD_KEYPAD REPRAPWORLD_KEYPAD_MOVE_STEP
|
||||
#exec_test $1 $2 "Stuff"
|
||||
#
|
||||
# RA_CONTROL_PANEL
|
||||
#
|
||||
#restore_configs
|
||||
#opt_enable RA_CONTROL_PANEL PINS_DEBUGGING
|
||||
#exec_test $1 $2 "Stuff"
|
||||
#
|
||||
######## I2C LCD/PANELS ##############
|
||||
#
|
||||
# !!!ATTENTION!!!
|
||||
# Most I2C configurations are failing at the moment because they require
|
||||
# a different Liquid Crystal library "LiquidTWI2".
|
||||
#
|
||||
# LCD_SAINSMART_I2C_1602
|
||||
#
|
||||
#restore_configs
|
||||
#opt_enable LCD_SAINSMART_I2C_1602
|
||||
#exec_test $1 $2 "Stuff"
|
||||
#
|
||||
# LCD_I2C_PANELOLU2
|
||||
#
|
||||
#restore_configs
|
||||
#opt_enable LCD_I2C_PANELOLU2
|
||||
#exec_test $1 $2 "Stuff"
|
||||
#
|
||||
# LCD_I2C_VIKI
|
||||
#
|
||||
#restore_configs
|
||||
#opt_enable LCD_I2C_VIKI
|
||||
#exec_test $1 $2 "Stuff"
|
||||
#
|
||||
# LCM1602
|
||||
#
|
||||
#restore_configs
|
||||
#opt_enable LCM1602
|
||||
#exec_test $1 $2 "Stuff"
|
||||
#
|
||||
# Language files test with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
#
|
||||
#restore_configs
|
||||
#opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
|
||||
#for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; exec_test $1 $2 "Stuff"; done
|
||||
#
|
||||
#restore_configs
|
||||
#opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT
|
||||
#for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; exec_test $1 $2 "Stuff"; done
|
||||
#
|
||||
#
|
||||
######## Example Configurations ##############
|
||||
#
|
||||
# BQ Hephestos 2
|
||||
#restore_configs
|
||||
#use_example_configs Hephestos_2
|
||||
#exec_test $1 $2 "Stuff"
|
||||
#
|
||||
# Delta Config (generic) + ABL bilinear + PROBE_MANUALLY
|
||||
use_example_configs delta/generic
|
||||
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR PROBE_MANUALLY
|
||||
exec_test $1 $2 "Delta Config (generic) + ABL bilinear + PROBE_MANUALLY"
|
||||
#
|
||||
# Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS
|
||||
#
|
||||
use_example_configs delta/generic
|
||||
opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT
|
||||
opt_enable OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY
|
||||
exec_test $1 $2 "Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS"
|
||||
#
|
||||
# Delta Config (FLSUN AC because it's complex)
|
||||
#
|
||||
use_example_configs delta/FLSUN/auto_calibrate
|
||||
exec_test $1 $2 "Delta Config (FLSUN AC because it's complex)"
|
||||
#
|
||||
# Makibox Config need to check board type for Teensy++ 2.0
|
||||
#
|
||||
#use_example_configs makibox
|
||||
#exec_test $1 $2 "Stuff"
|
||||
#
|
||||
# SCARA with TMC2130
|
||||
#
|
||||
use_example_configs SCARA
|
||||
opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER
|
||||
opt_enable_adv HAVE_TMC2130 X_IS_TMC2130 Y_IS_TMC2130 Z_IS_TMC2130
|
||||
opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD SENSORLESS_HOMING
|
||||
exec_test $1 $2 "SCARA with TMC2130"
|
||||
#
|
||||
# TMC2208 Config
|
||||
#
|
||||
restore_configs
|
||||
opt_enable_adv HAVE_TMC2208 X_IS_TMC2208 Y_IS_TMC2208 Z_IS_TMC2208
|
||||
opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD TMC_DEBUG
|
||||
exec_test $1 $2 "TMC2208 Config"
|
||||
#
|
||||
# tvrrug Config need to check board type for sanguino atmega644p
|
||||
#
|
||||
#use_example_configs tvrrug/Round2
|
||||
#exec_test $1 $2 "Stuff"
|
||||
#
|
||||
#
|
||||
|
||||
#clean up
|
||||
restore_configs
|
||||
37
buildroot/share/tests/start_tests
Executable file
37
buildroot/share/tests/start_tests
Executable file
|
|
@ -0,0 +1,37 @@
|
|||
#!/usr/bin/env bash
|
||||
export PATH="$PATH:$( cd "$(dirname "${BASH_SOURCE[0]}")" ; pwd -P )"
|
||||
export PATH="$PATH:./buildroot/bin"
|
||||
|
||||
# exit on first failure
|
||||
set -e
|
||||
|
||||
exec_test () {
|
||||
printf "\033[0;32m[Test $2] \033[0m$3... "
|
||||
if build_marlin_pio $1 "-e $2"; then
|
||||
printf "\033[0;32mPassed\033[0m\n"
|
||||
return 0
|
||||
else
|
||||
env_restore
|
||||
printf "\033[0;31mFailed!\033[0m\n"
|
||||
return 1
|
||||
fi
|
||||
}
|
||||
export -f exec_test
|
||||
|
||||
env_backup
|
||||
printf "Running \033[0;32m$2\033[0m Tests\n"
|
||||
if [ $2 = "ALL" ]; then
|
||||
dir_list=("$(dirname "${BASH_SOURCE[0]}")"/*)
|
||||
declare -a tests=(${dir_list[@]/*start_tests/})
|
||||
for f in "${tests[@]}"; do
|
||||
testenv=$(basename $f | cut -d"_" -f1)
|
||||
printf "Running \033[0;32m$f\033[0m Tests\n"
|
||||
exec_test $1 "$testenv --target clean" "Setup Build Environment"
|
||||
$f $1 $testenv
|
||||
done
|
||||
else
|
||||
exec_test $1 "$2 --target clean" "Setup Build Environment"
|
||||
$2_tests $1 $2
|
||||
fi
|
||||
printf "\033[0;32mAll tests completed successfully\033[0m\n"
|
||||
env_restore
|
||||
96
buildroot/share/tests/teensy35_tests
Executable file
96
buildroot/share/tests/teensy35_tests
Executable file
|
|
@ -0,0 +1,96 @@
|
|||
#!/usr/bin/env bash
|
||||
|
||||
# exit on first failure
|
||||
set -e
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_TEENSY35_36
|
||||
cp Marlin/src/pins/pins_RAMPS.h Marlin/src/pins/pins_RAMPS.h.backup
|
||||
#
|
||||
# Test Teensy3.5 with default config
|
||||
#
|
||||
exec_test $1 $2 "Teensy3.5 with default config"
|
||||
#
|
||||
# Test as many features together as possible
|
||||
#
|
||||
restore_configs
|
||||
opt_set EXTRUDERS 2
|
||||
opt_set TEMP_SENSOR_0 1
|
||||
opt_set TEMP_SENSOR_1 5
|
||||
opt_set TEMP_SENSOR_BED 1
|
||||
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
|
||||
opt_enable FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY
|
||||
opt_enable FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE
|
||||
opt_enable BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY
|
||||
opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT M100_FREE_MEMORY_WATCHER
|
||||
opt_enable_adv ADVANCED_PAUSE_FEATURE LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA PARK_HEAD_ON_PAUSE
|
||||
opt_set_adv I2C_SLAVE_ADDRESS 63
|
||||
opt_set GRID_MAX_POINTS_X 16
|
||||
exec_test $1 $2 "As many features together as possible"
|
||||
#
|
||||
# Test a Sled Z Probe with Linear leveling
|
||||
#
|
||||
restore_configs
|
||||
opt_enable Z_PROBE_SLED
|
||||
opt_enable AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
|
||||
exec_test $1 $2 "Sled Z Probe with Linear leveling"
|
||||
#
|
||||
# Test a Servo Probe
|
||||
#
|
||||
restore_configs
|
||||
opt_enable NUM_SERVOS Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE
|
||||
opt_set NUM_SERVOS 1
|
||||
opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
|
||||
exec_test $1 $2 "Servo Probe"
|
||||
#
|
||||
# ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
|
||||
#
|
||||
opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
|
||||
opt_enable_adv EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES
|
||||
exec_test $1 $2 "...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES"
|
||||
#
|
||||
# Test MESH_BED_LEVELING feature, with LCD
|
||||
#
|
||||
restore_configs
|
||||
opt_enable MESH_BED_LEVELING MESH_G28_REST_ORIGIN MANUAL_BED_LEVELING ULTIMAKERCONTROLLER
|
||||
exec_test $1 $2 "MESH_BED_LEVELING feature, with LCD"
|
||||
#
|
||||
# Mixing Extruder
|
||||
#
|
||||
restore_configs
|
||||
opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1
|
||||
opt_set MIXING_STEPPERS 2
|
||||
exec_test $1 $2 "Mixing Extruder"
|
||||
#
|
||||
# Test SWITCHING_EXTRUDER
|
||||
#
|
||||
restore_configs
|
||||
opt_set EXTRUDERS 2
|
||||
opt_enable NUM_SERVOS
|
||||
opt_set NUM_SERVOS 1
|
||||
opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
|
||||
exec_test $1 $2 "SWITCHING_EXTRUDER"
|
||||
#
|
||||
# Enable COREXY
|
||||
#
|
||||
restore_configs
|
||||
opt_enable COREXY
|
||||
exec_test $1 $2 "COREXY"
|
||||
#
|
||||
# Enable COREXZ
|
||||
#
|
||||
restore_configs
|
||||
opt_enable COREXZ
|
||||
exec_test $1 $2 "COREXZ"
|
||||
#
|
||||
# Enable Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS
|
||||
#
|
||||
restore_configs
|
||||
opt_enable_adv Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
|
||||
pins_set RAMPS X_MAX_PIN -1
|
||||
opt_add_adv Z2_MAX_PIN 2
|
||||
opt_enable USE_XMAX_PLUG
|
||||
exec_test $1 $2 "Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS"
|
||||
|
||||
#cleanup
|
||||
restore_configs
|
||||
Loading…
Reference in a new issue