zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Fysetc panel, RUMBA and ReARM pins, SPI mode 3 (#13900)

Browse source
This commit is contained in:
Bob Kuhn 2019-05-04 17:59:36 -05:00 committed by Scott Lahteine
parent 3cad0f08d9
commit c48e6be366
14 changed files with 549 additions and 16 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp
View file

@ -66,7 +66,7 @@ void spiBegin (void) {
}
#if DISABLED(SOFTWARE_SPI)
#if DISABLED(SOFTWARE_SPI, FORCE_SOFT_SPI)
//------------------------------------------------------------------------------
// Hardware SPI
@ -264,6 +264,6 @@ void spiBegin (void) {
spiSend(buf[i]);
}
#endif // SOFTWARE_SPI
#endif // SOFTWARE_SPI, FORCE_SOFT_SPI
#endif // __AVR__

195
Marlin/src/HAL/HAL_AVR/u8g_com_HAL_AVR_sw_spi.cpp Normal file
View file

@ -0,0 +1,195 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Based on u8g_com_st7920_hw_spi.c
*
* Universal 8bit Graphics Library
*
* Copyright (c) 2011, olikraus@gmail.com
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* * Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#if defined(ARDUINO) && !defined(ARDUINO_ARCH_STM32) && !defined(ARDUINO_ARCH_SAM)
#include "../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD
#include "../shared/Marduino.h"
#include "../shared/Delay.h"
#include <U8glib.h>
uint8_t u8g_bitData, u8g_bitNotData;
uint8_t u8g_bitClock, u8g_bitNotClock;
volatile uint8_t *u8g_outData;
volatile uint8_t *u8g_outClock;
static void u8g_com_arduino_init_shift_out(uint8_t dataPin, uint8_t clockPin) {
u8g_outData = portOutputRegister(digitalPinToPort(dataPin));
u8g_outClock = portOutputRegister(digitalPinToPort(clockPin));
u8g_bitData = digitalPinToBitMask(dataPin);
u8g_bitClock = digitalPinToBitMask(clockPin);
u8g_bitNotClock = u8g_bitClock;
u8g_bitNotClock ^= 0xFF;
u8g_bitNotData = u8g_bitData;
u8g_bitNotData ^= 0xFF;
}
void U8G_spiSend_sw_AVR_mode_0(uint8_t val) {
uint8_t bitData = u8g_bitData;
uint8_t bitNotData = u8g_bitNotData;
uint8_t bitClock = u8g_bitClock;
uint8_t bitNotClock = u8g_bitNotClock;
volatile uint8_t *outData = u8g_outData;
volatile uint8_t *outClock = u8g_outClock;
U8G_ATOMIC_START();
for (uint8_t i = 0; i < 8; i++) {
if (val & 0x80)
*outData |= bitData;
else
*outData &= bitNotData;
*outClock |= bitClock;
val <<= 1;
*outClock &= bitNotClock;
}
U8G_ATOMIC_END();
}
void U8G_spiSend_sw_AVR_mode_3(uint8_t val) {
uint8_t bitData = u8g_bitData;
uint8_t bitNotData = u8g_bitNotData;
uint8_t bitClock = u8g_bitClock;
uint8_t bitNotClock = u8g_bitNotClock;
volatile uint8_t *outData = u8g_outData;
volatile uint8_t *outClock = u8g_outClock;
U8G_ATOMIC_START();
for (uint8_t i = 0; i < 8; i++) {
*outClock &= bitNotClock;
if (val & 0x80)
*outData |= bitData;
else
*outData &= bitNotData;
*outClock |= bitClock;
val <<= 1;
}
U8G_ATOMIC_END();
}
#if ENABLED(FYSETC_MINI_12864)
#define U8G_spiSend_sw_AVR U8G_spiSend_sw_AVR_mode_3
#else
#define U8G_spiSend_sw_AVR U8G_spiSend_sw_AVR_mode_0
#endif
uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
switch (msg) {
case U8G_COM_MSG_INIT:
u8g_com_arduino_init_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK]);
u8g_com_arduino_assign_pin_output_high(u8g);
u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, 0);
u8g_com_arduino_digital_write(u8g, U8G_PI_MOSI, 0);
break;
case U8G_COM_MSG_STOP:
break;
case U8G_COM_MSG_RESET:
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val);
break;
case U8G_COM_MSG_CHIP_SELECT:
#if ENABLED(FYSETC_MINI_12864) // LCD SPI is running mode 3 while SD card is running mode 0
if (arg_val) { // SCK idle state needs to be set to the proper idle state before
// the next chip select goes active
u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, 1); // Set SCK to mode 3 idle state before CS goes active
u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
}
else {
u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, 0); // Set SCK to mode 0 idle state after CS goes inactive
}
#else
u8g_com_arduino_digital_write(u8g, U8G_PI_CS, !arg_val);
#endif
break;
case U8G_COM_MSG_WRITE_BYTE:
U8G_spiSend_sw_AVR(arg_val);
break;
case U8G_COM_MSG_WRITE_SEQ: {
uint8_t *ptr = (uint8_t *)arg_ptr;
while (arg_val > 0) {
U8G_spiSend_sw_AVR(*ptr++);
arg_val--;
}
}
break;
case U8G_COM_MSG_WRITE_SEQ_P: {
uint8_t *ptr = (uint8_t *)arg_ptr;
while (arg_val > 0) {
U8G_spiSend_sw_AVR(u8g_pgm_read(ptr));
ptr++;
arg_val--;
}
}
break;
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
u8g_com_arduino_digital_write(u8g, U8G_PI_A0, arg_val);
break;
}
return 1;
}
#endif // HAS_GRAPHICAL_LCD
#endif // ARDUINO_ARCH_SAM

154
Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_sw_spi.cpp Normal file
View file

@ -0,0 +1,154 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Based on u8g_com_std_sw_spi.c
*
* Universal 8bit Graphics Library
*
* Copyright (c) 2015, olikraus@gmail.com
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* * Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifdef ARDUINO_ARCH_SAM
#include "../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD && !ENABLED(U8GLIB_ST7920)
#undef SPI_SPEED
#define SPI_SPEED 2 // About 2 MHz
#include "../shared/Marduino.h"
#include "../shared/Delay.h"
#include <U8glib.h>
void u8g_SetPIOutput_DUE(u8g_t *u8g, uint8_t pin_index);
void u8g_SetPILevel_DUE(u8g_t *u8g, uint8_t pin_index, uint8_t level);
void U8G_spiSend_sw_DUE_mode_0(uint8_t val);
void U8G_spiSend_sw_DUE_mode_3(uint8_t val);
Pio *SCK_pPio, *MOSI_pPio;
uint32_t SCK_dwMask, MOSI_dwMask;
#if ENABLED(FYSETC_MINI_12864)
#define U8G_spiSend_sw_DUE U8G_spiSend_sw_DUE_mode_3
#else
#define U8G_spiSend_sw_DUE U8G_spiSend_sw_DUE_mode_0
#endif
uint8_t u8g_com_HAL_DUE_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
switch (msg) {
case U8G_COM_MSG_INIT:
SCK_pPio = g_APinDescription[u8g->pin_list[U8G_PI_SCK]].pPort;
SCK_dwMask = g_APinDescription[u8g->pin_list[U8G_PI_SCK]].ulPin;
MOSI_pPio = g_APinDescription[u8g->pin_list[U8G_PI_MOSI]].pPort;
MOSI_dwMask = g_APinDescription[u8g->pin_list[U8G_PI_MOSI]].ulPin;
u8g_SetPIOutput_DUE(u8g, U8G_PI_SCK);
u8g_SetPIOutput_DUE(u8g, U8G_PI_MOSI);
u8g_SetPIOutput_DUE(u8g, U8G_PI_CS);
u8g_SetPIOutput_DUE(u8g, U8G_PI_A0);
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPIOutput_DUE(u8g, U8G_PI_RESET);
u8g_SetPILevel_DUE(u8g, U8G_PI_SCK, 0);
u8g_SetPILevel_DUE(u8g, U8G_PI_MOSI, 0);
break;
case U8G_COM_MSG_STOP:
break;
case U8G_COM_MSG_RESET:
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPILevel_DUE(u8g, U8G_PI_RESET, arg_val);
break;
case U8G_COM_MSG_CHIP_SELECT:
#if ENABLED(FYSETC_MINI_12864) // LCD SPI is running mode 3 while SD card is running mode 0
if (arg_val) { // SCK idle state needs to be set to the proper idle state before
// the next chip select goes active
u8g_SetPILevel_DUE(u8g, U8G_PI_SCK, 1); //set SCK to mode 3 idle state before CS goes active
u8g_SetPILevel_DUE(u8g, U8G_PI_CS, LOW);
}
else {
u8g_SetPILevel_DUE(u8g, U8G_PI_CS, HIGH);
u8g_SetPILevel_DUE(u8g, U8G_PI_SCK, 0); //set SCK to mode 0 idle state after CS goes inactive
}
#else
u8g_SetPILevel_DUE(u8g, U8G_PI_CS, !arg_val);
#endif
break;
case U8G_COM_MSG_WRITE_BYTE:
U8G_spiSend_sw_DUE(arg_val);
break;
case U8G_COM_MSG_WRITE_SEQ: {
uint8_t *ptr = (uint8_t *)arg_ptr;
while (arg_val > 0) {
U8G_spiSend_sw_DUE(*ptr++);
arg_val--;
}
}
break;
case U8G_COM_MSG_WRITE_SEQ_P: {
uint8_t *ptr = (uint8_t *)arg_ptr;
while (arg_val > 0) {
U8G_spiSend_sw_DUE(u8g_pgm_read(ptr));
ptr++;
arg_val--;
}
}
break;
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
u8g_SetPILevel_DUE(u8g, U8G_PI_A0, arg_val);
break;
}
return 1;
}
#endif // HAS_GRAPHICAL_LCD
#endif // ARDUINO_ARCH_SAM

114
Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_sw_spi_shared.cpp Normal file
View file

@ -0,0 +1,114 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Based on u8g_com_st7920_hw_spi.c
*
* Universal 8bit Graphics Library
*
* Copyright (c) 2011, olikraus@gmail.com
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* * Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifdef ARDUINO_ARCH_SAM
#include "../../inc/MarlinConfigPre.h"
//C:\Users\bobku\Documents\GitHub\Marlin-Bob-2\Marlin\src\inc\MarlinConfigPre.h
//C:\Users\bobku\Documents\GitHub\Marlin-Bob-2\Marlin\src\HAL\HAL_DUE\u8g_com_HAL_DUE_sw_spi_shared.cpp
#if HAS_GRAPHICAL_LCD
#include "../shared/Marduino.h"
#include "../shared/Delay.h"
#include <U8glib.h>
void u8g_SetPIOutput_DUE(u8g_t *u8g, uint8_t pin_index) {
PIO_Configure(g_APinDescription[u8g->pin_list[pin_index]].pPort, PIO_OUTPUT_1,
g_APinDescription[u8g->pin_list[pin_index]].ulPin, g_APinDescription[u8g->pin_list[pin_index]].ulPinConfiguration); // OUTPUT
}
void u8g_SetPILevel_DUE(u8g_t *u8g, uint8_t pin_index, uint8_t level) {
volatile Pio* port = g_APinDescription[u8g->pin_list[pin_index]].pPort;
uint32_t mask = g_APinDescription[u8g->pin_list[pin_index]].ulPin;
if (level) port->PIO_SODR = mask; else port->PIO_CODR = mask;
}
extern Pio *SCK_pPio, *MOSI_pPio;
extern uint32_t SCK_dwMask, MOSI_dwMask;
void U8G_spiSend_sw_DUE_mode_0(uint8_t val) { // 800KHz
for (uint8_t i = 0; i < 8; i++) {
if (val & 0x80)
MOSI_pPio->PIO_SODR = MOSI_dwMask;
else
MOSI_pPio->PIO_CODR = MOSI_dwMask;
DELAY_NS(48);
SCK_pPio->PIO_SODR = SCK_dwMask;
DELAY_NS(905); // 762 dead, 810 garbage, 858/0 900kHz, 905/1 825k, 953/1 800k, 1000/2 725KHz
val <<= 1;
SCK_pPio->PIO_CODR = SCK_dwMask;
}
}
void U8G_spiSend_sw_DUE_mode_3(uint8_t val) { // 800KHz
for (uint8_t i = 0; i < 8; i++) {
SCK_pPio->PIO_CODR = SCK_dwMask;
DELAY_NS(48);
if (val & 0x80)
MOSI_pPio->PIO_SODR = MOSI_dwMask;
else
MOSI_pPio->PIO_CODR = MOSI_dwMask;
SCK_pPio->PIO_SODR = SCK_dwMask;
DELAY_NS(905); // 762 dead, 810 garbage, 858/0 900kHz, 905/1 825k, 953/1 800k, 1000/2 725KHz
val <<= 1;
}
}
#endif // HAS_GRAPHICAL_LCD
#endif // ARDUINO_ARCH_SAM

13
Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp
View file

@ -158,7 +158,19 @@ uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
break;
case U8G_COM_MSG_CHIP_SELECT:
#if ENABLED(FYSETC_MINI_12864) // LCD SPI is running mode 3 while SD card is running mode 0
if (arg_val) { // SCK idle state needs to be set to the proper idle state before
// the next chip select goes active
u8g_SetPILevel(u8g, U8G_PI_SCK, 1); // Set SCK to mode 3 idle state before CS goes active
u8g_SetPILevel(u8g, U8G_PI_CS, LOW);
}
else {
u8g_SetPILevel(u8g, U8G_PI_CS, HIGH);
u8g_SetPILevel(u8g, U8G_PI_SCK, 0); // Set SCK to mode 0 idle state after CS goes inactive
}
#else
u8g_SetPILevel(u8g, U8G_PI_CS, !arg_val);
#endif
break;
case U8G_COM_MSG_WRITE_BYTE:
@ -192,5 +204,4 @@ uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
}
#endif // HAS_GRAPHICAL_LCD
#endif // TARGET_LPC1768

8
Marlin/src/lcd/dogm/HAL_LCD_com_defines.h
View file

@ -24,16 +24,20 @@
#ifndef U8G_HAL_LINKS
uint8_t u8g_com_arduino_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_HAL_SW_SPI_FN u8g_com_arduino_sw_spi_fn
#ifdef __SAM3X8E__
uint8_t u8g_com_HAL_DUE_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_HAL_SW_SPI_FN u8g_com_HAL_DUE_sw_spi_fn
uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_HAL_HW_SPI_FN u8g_com_HAL_DUE_shared_hw_spi_fn
uint8_t u8g_com_HAL_DUE_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_ST7920_HAL_SW_SPI u8g_com_HAL_DUE_ST7920_sw_spi_fn
#else
uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_HAL_SW_SPI_FN u8g_com_HAL_AVR_sw_sp_fn
uint8_t u8g_com_arduino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_HAL_HW_SPI_FN u8g_com_arduino_hw_spi_fn

4
Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h
View file

@ -207,8 +207,10 @@
#define LCD_BACKLIGHT_PIN -1
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN P1_20 // Must be high or open for LCD to operate normally.
// Seems to work best if left open.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN

3
Marlin/src/pins/pins_MKS_SBASE.h
View file

@ -259,6 +259,9 @@
#define DOGLCD_SCK P2_11 // J8-5 (SCK on Fysetc schematic)
#define DOGLCD_MOSI P4_28 // J8-6 (MOSI on Fysetc schematic)
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN P2_12 // J8-4 (LCD_D6 on Fysetc schematic)

6
Marlin/src/pins/pins_RAMPS.h
View file

@ -538,8 +538,12 @@
#define SD_DETECT_PIN 49
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally.
// Seems to work best if left open.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN

6
Marlin/src/pins/pins_RAMPS_FD_V1.h
View file

@ -155,11 +155,13 @@
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS LCD_PINS_ENABLE
#define DOGLCD_A0 LCD_PINS_RS
#define DOGLCD_SCK 76
#define DOGLCD_MOSI 75
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes problems
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally.
// Seems to work best if left open.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN

23
Marlin/src/pins/pins_RAMPS_RE_ARM.h
View file

@ -347,9 +347,28 @@
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_SCK P0_15
#define DOGLCD_MOSI P0_18
#define DOGLCD_CS P1_09 // use Ethernet connector for EXP1 cable signals
// EXP1 on LCD adapter is not usable - using Ethernet connector instead
#define DOGLCD_CS P1_09
#define DOGLCD_A0 P1_14
#define FORCE_SOFT_SPI // required on a Re-ARM system
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN P0_16 // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN P1_00
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN P1_01
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN P1_08
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN P1_00
#endif
#else
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2

25
Marlin/src/pins/pins_RUMBA.h
View file

@ -175,6 +175,31 @@
#define DOGLCD_MOSI 42
#define DOGLCD_SCK 18
#define DOGLCD_A0 LCD_PINS_DC
#elif ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS 42
#define DOGLCD_A0 19
#define DOGLCD_MOSI 51
#define DOGLCD_SCK 52
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN 18 // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN 41
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN 38
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN 40
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN 25
#endif
#else
#define LCD_PINS_RS 19
#define LCD_PINS_ENABLE 42

4
Marlin/src/pins/pins_RURAMPS4D_11.h
View file

@ -233,10 +233,10 @@
#define DOGLCD_CS 64
#define DOGLCD_A0 63
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes problems
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN 48 // Must be high or open for LCD to operate normally.
// Seems to work best if left open.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN

4
Marlin/src/pins/pins_RURAMPS4D_13.h
View file

@ -219,10 +219,10 @@
#define DOGLCD_CS 64
#define DOGLCD_A0 63
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes problems
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN 48 // Must be high or open for LCD to operate normally.
// Seems to work best if left open.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN