zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Updates to support 5 extruders

Browse source
This commit is contained in:
Scott Lahteine 2017-04-09 03:23:05 -05:00
parent 2b88ccd0aa
commit c54f6cf23d
74 changed files with 446 additions and 89 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
Marlin/Configuration.h
View file

@ -142,7 +142,7 @@
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

12
Marlin/Configuration_adv.h
View file

@ -808,6 +808,7 @@
//#define E1_IS_TMC //#define E1_IS_TMC
//#define E2_IS_TMC //#define E2_IS_TMC
//#define E3_IS_TMC //#define E3_IS_TMC
//#define E4_IS_TMC
#define X_MAX_CURRENT 1000 // in mA #define X_MAX_CURRENT 1000 // in mA
#define X_SENSE_RESISTOR 91 // in mOhms #define X_SENSE_RESISTOR 91 // in mOhms
@ -849,6 +850,10 @@
#define E3_SENSE_RESISTOR 91 #define E3_SENSE_RESISTOR 91
#define E3_MICROSTEPS 16 #define E3_MICROSTEPS 16
#define E4_MAX_CURRENT 1000
#define E4_SENSE_RESISTOR 91
#define E4_MICROSTEPS 16
#endif #endif
// @section TMC2130 // @section TMC2130
@ -890,6 +895,7 @@
//#define E1_IS_TMC2130 //#define E1_IS_TMC2130
//#define E2_IS_TMC2130 //#define E2_IS_TMC2130
//#define E3_IS_TMC2130 //#define E3_IS_TMC2130
//#define E4_IS_TMC2130
/** /**
* Stepper driver settings * Stepper driver settings
@ -975,6 +981,7 @@
//#define E1_IS_L6470 //#define E1_IS_L6470
//#define E2_IS_L6470 //#define E2_IS_L6470
//#define E3_IS_L6470 //#define E3_IS_L6470
//#define E4_IS_L6470
#define X_MICROSTEPS 16 // number of microsteps #define X_MICROSTEPS 16 // number of microsteps
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
@ -1026,6 +1033,11 @@
#define E3_OVERCURRENT 2000 #define E3_OVERCURRENT 2000
#define E3_STALLCURRENT 1500 #define E3_STALLCURRENT 1500
#define E4_MICROSTEPS 16
#define E4_K_VAL 50
#define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500
#endif #endif
/** /**

13
Marlin/configuration_store.cpp
View file

@ -144,9 +144,10 @@
* 568 M906 E1 stepperE1 current (uint16_t) * 568 M906 E1 stepperE1 current (uint16_t)
* 570 M906 E2 stepperE2 current (uint16_t) * 570 M906 E2 stepperE2 current (uint16_t)
* 572 M906 E3 stepperE3 current (uint16_t) * 572 M906 E3 stepperE3 current (uint16_t)
* 572 M906 E4 stepperE4 current (uint16_t)
* *
* 574 Minimum end-point * 576 Minimum end-point
* 1895 (574 + 36 + 9 + 288 + 988) Maximum end-point * 1897 (576 + 36 + 9 + 288 + 988) Maximum end-point
*/ */
#include "Marlin.h" #include "Marlin.h"
#include "language.h" #include "language.h"
@ -520,7 +521,7 @@ void Config_Postprocess() {
EEPROM_WRITE(val); EEPROM_WRITE(val);
#else #else
val = 0; val = 0;
for (uint8_t q = 0; q < 10; ++q) EEPROM_WRITE(val); for (uint8_t q = 0; q < 11; ++q) EEPROM_WRITE(val);
#endif #endif
if (!eeprom_write_error) { if (!eeprom_write_error) {
@ -824,8 +825,12 @@ void Config_Postprocess() {
#if ENABLED(E3_IS_TMC2130) #if ENABLED(E3_IS_TMC2130)
stepperE3.setCurrent(val, R_SENSE, HOLD_MULTIPLIER); stepperE3.setCurrent(val, R_SENSE, HOLD_MULTIPLIER);
#endif #endif
EEPROM_READ(val);
#if ENABLED(E4_IS_TMC2130)
stepperE4.setCurrent(val, R_SENSE, HOLD_MULTIPLIER);
#endif
#else #else
for (uint8_t q = 0; q < 10; q++) EEPROM_READ(val); for (uint8_t q = 0; q < 11; q++) EEPROM_READ(val);
#endif #endif
if (eeprom_checksum == stored_checksum) { if (eeprom_checksum == stored_checksum) {

2
Marlin/example_configurations/Cartesio/Configuration.h
View file

@ -143,7 +143,7 @@
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 3 #define EXTRUDERS 3
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

12
Marlin/example_configurations/Cartesio/Configuration_adv.h
View file

@ -805,6 +805,7 @@
//#define E1_IS_TMC //#define E1_IS_TMC
//#define E2_IS_TMC //#define E2_IS_TMC
//#define E3_IS_TMC //#define E3_IS_TMC
//#define E4_IS_TMC
#define X_MAX_CURRENT 1000 // in mA #define X_MAX_CURRENT 1000 // in mA
#define X_SENSE_RESISTOR 91 // in mOhms #define X_SENSE_RESISTOR 91 // in mOhms
@ -846,6 +847,10 @@
#define E3_SENSE_RESISTOR 91 #define E3_SENSE_RESISTOR 91
#define E3_MICROSTEPS 16 #define E3_MICROSTEPS 16
#define E4_MAX_CURRENT 1000
#define E4_SENSE_RESISTOR 91
#define E4_MICROSTEPS 16
#endif #endif
// @section TMC2130 // @section TMC2130
@ -887,6 +892,7 @@
//#define E1_IS_TMC2130 //#define E1_IS_TMC2130
//#define E2_IS_TMC2130 //#define E2_IS_TMC2130
//#define E3_IS_TMC2130 //#define E3_IS_TMC2130
//#define E4_IS_TMC2130
/** /**
* Stepper driver settings * Stepper driver settings
@ -972,6 +978,7 @@
//#define E1_IS_L6470 //#define E1_IS_L6470
//#define E2_IS_L6470 //#define E2_IS_L6470
//#define E3_IS_L6470 //#define E3_IS_L6470
//#define E4_IS_L6470
#define X_MICROSTEPS 16 // number of microsteps #define X_MICROSTEPS 16 // number of microsteps
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
@ -1023,6 +1030,11 @@
#define E3_OVERCURRENT 2000 #define E3_OVERCURRENT 2000
#define E3_STALLCURRENT 1500 #define E3_STALLCURRENT 1500
#define E4_MICROSTEPS 16
#define E4_K_VAL 50
#define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500
#endif #endif
/** /**

2
Marlin/example_configurations/Felix/Configuration.h
View file

@ -142,7 +142,7 @@
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

12
Marlin/example_configurations/Felix/Configuration_adv.h
View file

@ -805,6 +805,7 @@
//#define E1_IS_TMC //#define E1_IS_TMC
//#define E2_IS_TMC //#define E2_IS_TMC
//#define E3_IS_TMC //#define E3_IS_TMC
//#define E4_IS_TMC
#define X_MAX_CURRENT 1000 // in mA #define X_MAX_CURRENT 1000 // in mA
#define X_SENSE_RESISTOR 91 // in mOhms #define X_SENSE_RESISTOR 91 // in mOhms
@ -846,6 +847,10 @@
#define E3_SENSE_RESISTOR 91 #define E3_SENSE_RESISTOR 91
#define E3_MICROSTEPS 16 #define E3_MICROSTEPS 16
#define E4_MAX_CURRENT 1000
#define E4_SENSE_RESISTOR 91
#define E4_MICROSTEPS 16
#endif #endif
// @section TMC2130 // @section TMC2130
@ -887,6 +892,7 @@
//#define E1_IS_TMC2130 //#define E1_IS_TMC2130
//#define E2_IS_TMC2130 //#define E2_IS_TMC2130
//#define E3_IS_TMC2130 //#define E3_IS_TMC2130
//#define E4_IS_TMC2130
/** /**
* Stepper driver settings * Stepper driver settings
@ -972,6 +978,7 @@
//#define E1_IS_L6470 //#define E1_IS_L6470
//#define E2_IS_L6470 //#define E2_IS_L6470
//#define E3_IS_L6470 //#define E3_IS_L6470
//#define E4_IS_L6470
#define X_MICROSTEPS 16 // number of microsteps #define X_MICROSTEPS 16 // number of microsteps
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
@ -1023,6 +1030,11 @@
#define E3_OVERCURRENT 2000 #define E3_OVERCURRENT 2000
#define E3_STALLCURRENT 1500 #define E3_STALLCURRENT 1500
#define E4_MICROSTEPS 16
#define E4_K_VAL 50
#define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500
#endif #endif
/** /**

2
Marlin/example_configurations/Felix/DUAL/Configuration.h
View file

@ -142,7 +142,7 @@
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 2 #define EXTRUDERS 2
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

2
Marlin/example_configurations/Hephestos/Configuration.h
View file

@ -145,7 +145,7 @@
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

12
Marlin/example_configurations/Hephestos/Configuration_adv.h
View file

@ -805,6 +805,7 @@
//#define E1_IS_TMC //#define E1_IS_TMC
//#define E2_IS_TMC //#define E2_IS_TMC
//#define E3_IS_TMC //#define E3_IS_TMC
//#define E4_IS_TMC
#define X_MAX_CURRENT 1000 // in mA #define X_MAX_CURRENT 1000 // in mA
#define X_SENSE_RESISTOR 91 // in mOhms #define X_SENSE_RESISTOR 91 // in mOhms
@ -846,6 +847,10 @@
#define E3_SENSE_RESISTOR 91 #define E3_SENSE_RESISTOR 91
#define E3_MICROSTEPS 16 #define E3_MICROSTEPS 16
#define E4_MAX_CURRENT 1000
#define E4_SENSE_RESISTOR 91
#define E4_MICROSTEPS 16
#endif #endif
// @section TMC2130 // @section TMC2130
@ -887,6 +892,7 @@
//#define E1_IS_TMC2130 //#define E1_IS_TMC2130
//#define E2_IS_TMC2130 //#define E2_IS_TMC2130
//#define E3_IS_TMC2130 //#define E3_IS_TMC2130
//#define E4_IS_TMC2130
/** /**
* Stepper driver settings * Stepper driver settings
@ -972,6 +978,7 @@
//#define E1_IS_L6470 //#define E1_IS_L6470
//#define E2_IS_L6470 //#define E2_IS_L6470
//#define E3_IS_L6470 //#define E3_IS_L6470
//#define E4_IS_L6470
#define X_MICROSTEPS 16 // number of microsteps #define X_MICROSTEPS 16 // number of microsteps
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
@ -1023,6 +1030,11 @@
#define E3_OVERCURRENT 2000 #define E3_OVERCURRENT 2000
#define E3_STALLCURRENT 1500 #define E3_STALLCURRENT 1500
#define E4_MICROSTEPS 16
#define E4_K_VAL 50
#define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500
#endif #endif
/** /**

2
Marlin/example_configurations/Hephestos_2/Configuration.h
View file

@ -142,7 +142,7 @@
#define MACHINE_UUID "8d083632-40c5-4649-85b8-43d9ae6c5d55" // BQ Hephestos 2 standard config #define MACHINE_UUID "8d083632-40c5-4649-85b8-43d9ae6c5d55" // BQ Hephestos 2 standard config
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

12
Marlin/example_configurations/Hephestos_2/Configuration_adv.h
View file

@ -789,6 +789,7 @@
//#define E1_IS_TMC //#define E1_IS_TMC
//#define E2_IS_TMC //#define E2_IS_TMC
//#define E3_IS_TMC //#define E3_IS_TMC
//#define E4_IS_TMC
#define X_MAX_CURRENT 1000 // in mA #define X_MAX_CURRENT 1000 // in mA
#define X_SENSE_RESISTOR 91 // in mOhms #define X_SENSE_RESISTOR 91 // in mOhms
@ -830,6 +831,10 @@
#define E3_SENSE_RESISTOR 91 #define E3_SENSE_RESISTOR 91
#define E3_MICROSTEPS 16 #define E3_MICROSTEPS 16
#define E4_MAX_CURRENT 1000
#define E4_SENSE_RESISTOR 91
#define E4_MICROSTEPS 16
#endif #endif
// @section TMC2130 // @section TMC2130
@ -871,6 +876,7 @@
//#define E1_IS_TMC2130 //#define E1_IS_TMC2130
//#define E2_IS_TMC2130 //#define E2_IS_TMC2130
//#define E3_IS_TMC2130 //#define E3_IS_TMC2130
//#define E4_IS_TMC2130
/** /**
* Stepper driver settings * Stepper driver settings
@ -956,6 +962,7 @@
//#define E1_IS_L6470 //#define E1_IS_L6470
//#define E2_IS_L6470 //#define E2_IS_L6470
//#define E3_IS_L6470 //#define E3_IS_L6470
//#define E4_IS_L6470
#define X_MICROSTEPS 16 // number of microsteps #define X_MICROSTEPS 16 // number of microsteps
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
@ -1007,6 +1014,11 @@
#define E3_OVERCURRENT 2000 #define E3_OVERCURRENT 2000
#define E3_STALLCURRENT 1500 #define E3_STALLCURRENT 1500
#define E4_MICROSTEPS 16
#define E4_K_VAL 50
#define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500
#endif #endif
/** /**

2
Marlin/example_configurations/K8200/Configuration.h
View file

@ -162,7 +162,7 @@
#endif #endif
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

12
Marlin/example_configurations/K8200/Configuration_adv.h
View file

@ -818,6 +818,7 @@
//#define E1_IS_TMC //#define E1_IS_TMC
//#define E2_IS_TMC //#define E2_IS_TMC
//#define E3_IS_TMC //#define E3_IS_TMC
//#define E4_IS_TMC
#define X_MAX_CURRENT 1000 // in mA #define X_MAX_CURRENT 1000 // in mA
#define X_SENSE_RESISTOR 91 // in mOhms #define X_SENSE_RESISTOR 91 // in mOhms
@ -859,6 +860,10 @@
#define E3_SENSE_RESISTOR 91 #define E3_SENSE_RESISTOR 91
#define E3_MICROSTEPS 16 #define E3_MICROSTEPS 16
#define E4_MAX_CURRENT 1000
#define E4_SENSE_RESISTOR 91
#define E4_MICROSTEPS 16
#endif #endif
// @section TMC2130 // @section TMC2130
@ -900,6 +905,7 @@
//#define E1_IS_TMC2130 //#define E1_IS_TMC2130
//#define E2_IS_TMC2130 //#define E2_IS_TMC2130
//#define E3_IS_TMC2130 //#define E3_IS_TMC2130
//#define E4_IS_TMC2130
/** /**
* Stepper driver settings * Stepper driver settings
@ -985,6 +991,7 @@
//#define E1_IS_L6470 //#define E1_IS_L6470
//#define E2_IS_L6470 //#define E2_IS_L6470
//#define E3_IS_L6470 //#define E3_IS_L6470
//#define E4_IS_L6470
#define X_MICROSTEPS 16 // number of microsteps #define X_MICROSTEPS 16 // number of microsteps
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
@ -1036,6 +1043,11 @@
#define E3_OVERCURRENT 2000 #define E3_OVERCURRENT 2000
#define E3_STALLCURRENT 1500 #define E3_STALLCURRENT 1500
#define E4_MICROSTEPS 16
#define E4_K_VAL 50
#define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500
#endif #endif
/** /**

2
Marlin/example_configurations/K8400/Configuration.h
View file

@ -142,7 +142,7 @@
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

12
Marlin/example_configurations/K8400/Configuration_adv.h
View file

@ -805,6 +805,7 @@
//#define E1_IS_TMC //#define E1_IS_TMC
//#define E2_IS_TMC //#define E2_IS_TMC
//#define E3_IS_TMC //#define E3_IS_TMC
//#define E4_IS_TMC
#define X_MAX_CURRENT 1000 // in mA #define X_MAX_CURRENT 1000 // in mA
#define X_SENSE_RESISTOR 91 // in mOhms #define X_SENSE_RESISTOR 91 // in mOhms
@ -846,6 +847,10 @@
#define E3_SENSE_RESISTOR 91 #define E3_SENSE_RESISTOR 91
#define E3_MICROSTEPS 16 #define E3_MICROSTEPS 16
#define E4_MAX_CURRENT 1000
#define E4_SENSE_RESISTOR 91
#define E4_MICROSTEPS 16
#endif #endif
// @section TMC2130 // @section TMC2130
@ -887,6 +892,7 @@
//#define E1_IS_TMC2130 //#define E1_IS_TMC2130
//#define E2_IS_TMC2130 //#define E2_IS_TMC2130
//#define E3_IS_TMC2130 //#define E3_IS_TMC2130
//#define E4_IS_TMC2130
/** /**
* Stepper driver settings * Stepper driver settings
@ -972,6 +978,7 @@
//#define E1_IS_L6470 //#define E1_IS_L6470
//#define E2_IS_L6470 //#define E2_IS_L6470
//#define E3_IS_L6470 //#define E3_IS_L6470
//#define E4_IS_L6470
#define X_MICROSTEPS 16 // number of microsteps #define X_MICROSTEPS 16 // number of microsteps
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
@ -1023,6 +1030,11 @@
#define E3_OVERCURRENT 2000 #define E3_OVERCURRENT 2000
#define E3_STALLCURRENT 1500 #define E3_STALLCURRENT 1500
#define E4_MICROSTEPS 16
#define E4_K_VAL 50
#define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500
#endif #endif
/** /**

2
Marlin/example_configurations/K8400/Dual-head/Configuration.h
View file

@ -142,7 +142,7 @@
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 2 #define EXTRUDERS 2
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

2
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
View file

@ -142,7 +142,7 @@
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

2
Marlin/example_configurations/RigidBot/Configuration.h
View file

@ -145,7 +145,7 @@
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 // Single extruder. Set to 2 for dual extruders #define EXTRUDERS 1 // Single extruder. Set to 2 for dual extruders
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

12
Marlin/example_configurations/RigidBot/Configuration_adv.h
View file

@ -805,6 +805,7 @@
//#define E1_IS_TMC //#define E1_IS_TMC
//#define E2_IS_TMC //#define E2_IS_TMC
//#define E3_IS_TMC //#define E3_IS_TMC
//#define E4_IS_TMC
#define X_MAX_CURRENT 1000 // in mA #define X_MAX_CURRENT 1000 // in mA
#define X_SENSE_RESISTOR 91 // in mOhms #define X_SENSE_RESISTOR 91 // in mOhms
@ -846,6 +847,10 @@
#define E3_SENSE_RESISTOR 91 #define E3_SENSE_RESISTOR 91
#define E3_MICROSTEPS 16 #define E3_MICROSTEPS 16
#define E4_MAX_CURRENT 1000
#define E4_SENSE_RESISTOR 91
#define E4_MICROSTEPS 16
#endif #endif
// @section TMC2130 // @section TMC2130
@ -887,6 +892,7 @@
//#define E1_IS_TMC2130 //#define E1_IS_TMC2130
//#define E2_IS_TMC2130 //#define E2_IS_TMC2130
//#define E3_IS_TMC2130 //#define E3_IS_TMC2130
//#define E4_IS_TMC2130
/** /**
* Stepper driver settings * Stepper driver settings
@ -972,6 +978,7 @@
//#define E1_IS_L6470 //#define E1_IS_L6470
//#define E2_IS_L6470 //#define E2_IS_L6470
//#define E3_IS_L6470 //#define E3_IS_L6470
//#define E4_IS_L6470
#define X_MICROSTEPS 16 // number of microsteps #define X_MICROSTEPS 16 // number of microsteps
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
@ -1023,6 +1030,11 @@
#define E3_OVERCURRENT 2000 #define E3_OVERCURRENT 2000
#define E3_STALLCURRENT 1500 #define E3_STALLCURRENT 1500
#define E4_MICROSTEPS 16
#define E4_K_VAL 50
#define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500
#endif #endif
/** /**

2
Marlin/example_configurations/SCARA/Configuration.h
View file

@ -174,7 +174,7 @@
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

12
Marlin/example_configurations/SCARA/Configuration_adv.h
View file

@ -805,6 +805,7 @@
//#define E1_IS_TMC //#define E1_IS_TMC
//#define E2_IS_TMC //#define E2_IS_TMC
//#define E3_IS_TMC //#define E3_IS_TMC
//#define E4_IS_TMC
#define X_MAX_CURRENT 1000 // in mA #define X_MAX_CURRENT 1000 // in mA
#define X_SENSE_RESISTOR 91 // in mOhms #define X_SENSE_RESISTOR 91 // in mOhms
@ -846,6 +847,10 @@
#define E3_SENSE_RESISTOR 91 #define E3_SENSE_RESISTOR 91
#define E3_MICROSTEPS 16 #define E3_MICROSTEPS 16
#define E4_MAX_CURRENT 1000
#define E4_SENSE_RESISTOR 91
#define E4_MICROSTEPS 16
#endif #endif
// @section TMC2130 // @section TMC2130
@ -887,6 +892,7 @@
//#define E1_IS_TMC2130 //#define E1_IS_TMC2130
//#define E2_IS_TMC2130 //#define E2_IS_TMC2130
//#define E3_IS_TMC2130 //#define E3_IS_TMC2130
//#define E4_IS_TMC2130
/** /**
* Stepper driver settings * Stepper driver settings
@ -972,6 +978,7 @@
//#define E1_IS_L6470 //#define E1_IS_L6470
//#define E2_IS_L6470 //#define E2_IS_L6470
//#define E3_IS_L6470 //#define E3_IS_L6470
//#define E4_IS_L6470
#define X_MICROSTEPS 16 // number of microsteps #define X_MICROSTEPS 16 // number of microsteps
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
@ -1023,6 +1030,11 @@
#define E3_OVERCURRENT 2000 #define E3_OVERCURRENT 2000
#define E3_STALLCURRENT 1500 #define E3_STALLCURRENT 1500
#define E4_MICROSTEPS 16
#define E4_K_VAL 50
#define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500
#endif #endif
/** /**

2
Marlin/example_configurations/TAZ4/Configuration.h
View file

@ -142,7 +142,7 @@
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

12
Marlin/example_configurations/TAZ4/Configuration_adv.h
View file

@ -813,6 +813,7 @@
//#define E1_IS_TMC //#define E1_IS_TMC
//#define E2_IS_TMC //#define E2_IS_TMC
//#define E3_IS_TMC //#define E3_IS_TMC
//#define E4_IS_TMC
#define X_MAX_CURRENT 1000 // in mA #define X_MAX_CURRENT 1000 // in mA
#define X_SENSE_RESISTOR 91 // in mOhms #define X_SENSE_RESISTOR 91 // in mOhms
@ -854,6 +855,10 @@
#define E3_SENSE_RESISTOR 91 #define E3_SENSE_RESISTOR 91
#define E3_MICROSTEPS 16 #define E3_MICROSTEPS 16
#define E4_MAX_CURRENT 1000
#define E4_SENSE_RESISTOR 91
#define E4_MICROSTEPS 16
#endif #endif
// @section TMC2130 // @section TMC2130
@ -895,6 +900,7 @@
//#define E1_IS_TMC2130 //#define E1_IS_TMC2130
//#define E2_IS_TMC2130 //#define E2_IS_TMC2130
//#define E3_IS_TMC2130 //#define E3_IS_TMC2130
//#define E4_IS_TMC2130
/** /**
* Stepper driver settings * Stepper driver settings
@ -980,6 +986,7 @@
//#define E1_IS_L6470 //#define E1_IS_L6470
//#define E2_IS_L6470 //#define E2_IS_L6470
//#define E3_IS_L6470 //#define E3_IS_L6470
//#define E4_IS_L6470
#define X_MICROSTEPS 16 // number of microsteps #define X_MICROSTEPS 16 // number of microsteps
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
@ -1031,6 +1038,11 @@
#define E3_OVERCURRENT 2000 #define E3_OVERCURRENT 2000
#define E3_STALLCURRENT 1500 #define E3_STALLCURRENT 1500
#define E4_MICROSTEPS 16
#define E4_K_VAL 50
#define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500
#endif #endif
/** /**

9
Marlin/example_configurations/TinyBoy2/Configuration.h
View file

@ -164,7 +164,7 @@
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical
@ -988,13 +988,6 @@
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
#define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
#if ENABLED(MANUAL_BED_LEVELING)
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
#endif
#endif // BED_LEVELING #endif // BED_LEVELING
/** /**

12
Marlin/example_configurations/TinyBoy2/Configuration_adv.h
View file

@ -789,6 +789,7 @@
//#define E1_IS_TMC //#define E1_IS_TMC
//#define E2_IS_TMC //#define E2_IS_TMC
//#define E3_IS_TMC //#define E3_IS_TMC
//#define E4_IS_TMC
#define X_MAX_CURRENT 1000 // in mA #define X_MAX_CURRENT 1000 // in mA
#define X_SENSE_RESISTOR 91 // in mOhms #define X_SENSE_RESISTOR 91 // in mOhms
@ -830,6 +831,10 @@
#define E3_SENSE_RESISTOR 91 #define E3_SENSE_RESISTOR 91
#define E3_MICROSTEPS 16 #define E3_MICROSTEPS 16
#define E4_MAX_CURRENT 1000
#define E4_SENSE_RESISTOR 91
#define E4_MICROSTEPS 16
#endif #endif
// @section TMC2130 // @section TMC2130
@ -871,6 +876,7 @@
//#define E1_IS_TMC2130 //#define E1_IS_TMC2130
//#define E2_IS_TMC2130 //#define E2_IS_TMC2130
//#define E3_IS_TMC2130 //#define E3_IS_TMC2130
//#define E4_IS_TMC2130
/** /**
* Stepper driver settings * Stepper driver settings
@ -956,6 +962,7 @@
//#define E1_IS_L6470 //#define E1_IS_L6470
//#define E2_IS_L6470 //#define E2_IS_L6470
//#define E3_IS_L6470 //#define E3_IS_L6470
//#define E4_IS_L6470
#define X_MICROSTEPS 16 // number of microsteps #define X_MICROSTEPS 16 // number of microsteps
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
@ -1007,6 +1014,11 @@
#define E3_OVERCURRENT 2000 #define E3_OVERCURRENT 2000
#define E3_STALLCURRENT 1500 #define E3_STALLCURRENT 1500
#define E4_MICROSTEPS 16
#define E4_K_VAL 50
#define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500
#endif #endif
/** /**

2
Marlin/example_configurations/WITBOX/Configuration.h
View file

@ -145,7 +145,7 @@
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

12
Marlin/example_configurations/WITBOX/Configuration_adv.h
View file

@ -805,6 +805,7 @@
//#define E1_IS_TMC //#define E1_IS_TMC
//#define E2_IS_TMC //#define E2_IS_TMC
//#define E3_IS_TMC //#define E3_IS_TMC
//#define E4_IS_TMC
#define X_MAX_CURRENT 1000 // in mA #define X_MAX_CURRENT 1000 // in mA
#define X_SENSE_RESISTOR 91 // in mOhms #define X_SENSE_RESISTOR 91 // in mOhms
@ -846,6 +847,10 @@
#define E3_SENSE_RESISTOR 91 #define E3_SENSE_RESISTOR 91
#define E3_MICROSTEPS 16 #define E3_MICROSTEPS 16
#define E4_MAX_CURRENT 1000
#define E4_SENSE_RESISTOR 91
#define E4_MICROSTEPS 16
#endif #endif
// @section TMC2130 // @section TMC2130
@ -887,6 +892,7 @@
//#define E1_IS_TMC2130 //#define E1_IS_TMC2130
//#define E2_IS_TMC2130 //#define E2_IS_TMC2130
//#define E3_IS_TMC2130 //#define E3_IS_TMC2130
//#define E4_IS_TMC2130
/** /**
* Stepper driver settings * Stepper driver settings
@ -972,6 +978,7 @@
//#define E1_IS_L6470 //#define E1_IS_L6470
//#define E2_IS_L6470 //#define E2_IS_L6470
//#define E3_IS_L6470 //#define E3_IS_L6470
//#define E4_IS_L6470
#define X_MICROSTEPS 16 // number of microsteps #define X_MICROSTEPS 16 // number of microsteps
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
@ -1023,6 +1030,11 @@
#define E3_OVERCURRENT 2000 #define E3_OVERCURRENT 2000
#define E3_STALLCURRENT 1500 #define E3_STALLCURRENT 1500
#define E4_MICROSTEPS 16
#define E4_K_VAL 50
#define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500
#endif #endif
/** /**

2
Marlin/example_configurations/adafruit/ST7565/Configuration.h
View file

@ -142,7 +142,7 @@
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

2
Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h
View file

@ -142,7 +142,7 @@
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

2
Marlin/example_configurations/delta/generic/Configuration.h
View file

@ -142,7 +142,7 @@
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

30
Marlin/example_configurations/delta/generic/Configuration_adv.h
View file

@ -427,6 +427,24 @@
/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */ /* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
//===========================================================================
//============================== Delta Settings =============================
//===========================================================================
#if ENABLED(DELTA_AUTO_CALIBRATION)
/**
* Set the height short (H-10) with M665 Hx.xx.
* Set the delta_radius offset (R-5, R-10, R+5, R+10) with M665 Rx.xx.
* Run G33 Cx V3 with different values (C2, C-2).
* Take the average for R_FACTOR and maximum for H_FACTOR.
* If R_FACTOR is too low accuracy is reduced. Too high reduces iteration speed.
* Run the tests with default values!!!
*/
//#define DELTA_CALIBRATE_EXPERT_MODE
//#define H_FACTOR 1.02 // 1.0 < H_FACTOR < 1.11, default 1.00
//#define R_FACTOR -3.95 // -6.7 < R_FACTOR < -2.25, default -2.25
#endif
//=========================================================================== //===========================================================================
//=============================Additional Features=========================== //=============================Additional Features===========================
//=========================================================================== //===========================================================================
@ -807,6 +825,7 @@
//#define E1_IS_TMC //#define E1_IS_TMC
//#define E2_IS_TMC //#define E2_IS_TMC
//#define E3_IS_TMC //#define E3_IS_TMC
//#define E4_IS_TMC
#define X_MAX_CURRENT 1000 // in mA #define X_MAX_CURRENT 1000 // in mA
#define X_SENSE_RESISTOR 91 // in mOhms #define X_SENSE_RESISTOR 91 // in mOhms
@ -848,6 +867,10 @@
#define E3_SENSE_RESISTOR 91 #define E3_SENSE_RESISTOR 91
#define E3_MICROSTEPS 16 #define E3_MICROSTEPS 16
#define E4_MAX_CURRENT 1000
#define E4_SENSE_RESISTOR 91
#define E4_MICROSTEPS 16
#endif #endif
// @section TMC2130 // @section TMC2130
@ -889,6 +912,7 @@
//#define E1_IS_TMC2130 //#define E1_IS_TMC2130
//#define E2_IS_TMC2130 //#define E2_IS_TMC2130
//#define E3_IS_TMC2130 //#define E3_IS_TMC2130
//#define E4_IS_TMC2130
/** /**
* Stepper driver settings * Stepper driver settings
@ -974,6 +998,7 @@
//#define E1_IS_L6470 //#define E1_IS_L6470
//#define E2_IS_L6470 //#define E2_IS_L6470
//#define E3_IS_L6470 //#define E3_IS_L6470
//#define E4_IS_L6470
#define X_MICROSTEPS 16 // number of microsteps #define X_MICROSTEPS 16 // number of microsteps
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
@ -1025,6 +1050,11 @@
#define E3_OVERCURRENT 2000 #define E3_OVERCURRENT 2000
#define E3_STALLCURRENT 1500 #define E3_STALLCURRENT 1500
#define E4_MICROSTEPS 16
#define E4_K_VAL 50
#define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500
#endif #endif
/** /**

2
Marlin/example_configurations/delta/kossel_mini/Configuration.h
View file

@ -142,7 +142,7 @@
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

30
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
View file

@ -427,6 +427,24 @@
/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */ /* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
//===========================================================================
//============================== Delta Settings =============================
//===========================================================================
#if ENABLED(DELTA_AUTO_CALIBRATION)
/**
* Set the height short (H-10) with M665 Hx.xx.
* Set the delta_radius offset (R-5, R-10, R+5, R+10) with M665 Rx.xx.
* Run G33 Cx V3 with different values (C2, C-2).
* Take the average for R_FACTOR and maximum for H_FACTOR.
* If R_FACTOR is too low accuracy is reduced. Too high reduces iteration speed.
* Run the tests with default values!!!
*/
//#define DELTA_CALIBRATE_EXPERT_MODE
//#define H_FACTOR 1.02 // 1.0 < H_FACTOR < 1.11, default 1.00
//#define R_FACTOR -3.95 // -6.7 < R_FACTOR < -2.25, default -2.25
#endif
//=========================================================================== //===========================================================================
//=============================Additional Features=========================== //=============================Additional Features===========================
//=========================================================================== //===========================================================================
@ -807,6 +825,7 @@
//#define E1_IS_TMC //#define E1_IS_TMC
//#define E2_IS_TMC //#define E2_IS_TMC
//#define E3_IS_TMC //#define E3_IS_TMC
//#define E4_IS_TMC
#define X_MAX_CURRENT 1000 // in mA #define X_MAX_CURRENT 1000 // in mA
#define X_SENSE_RESISTOR 91 // in mOhms #define X_SENSE_RESISTOR 91 // in mOhms
@ -848,6 +867,10 @@
#define E3_SENSE_RESISTOR 91 #define E3_SENSE_RESISTOR 91
#define E3_MICROSTEPS 16 #define E3_MICROSTEPS 16
#define E4_MAX_CURRENT 1000
#define E4_SENSE_RESISTOR 91
#define E4_MICROSTEPS 16
#endif #endif
// @section TMC2130 // @section TMC2130
@ -889,6 +912,7 @@
//#define E1_IS_TMC2130 //#define E1_IS_TMC2130
//#define E2_IS_TMC2130 //#define E2_IS_TMC2130
//#define E3_IS_TMC2130 //#define E3_IS_TMC2130
//#define E4_IS_TMC2130
/** /**
* Stepper driver settings * Stepper driver settings
@ -974,6 +998,7 @@
//#define E1_IS_L6470 //#define E1_IS_L6470
//#define E2_IS_L6470 //#define E2_IS_L6470
//#define E3_IS_L6470 //#define E3_IS_L6470
//#define E4_IS_L6470
#define X_MICROSTEPS 16 // number of microsteps #define X_MICROSTEPS 16 // number of microsteps
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
@ -1025,6 +1050,11 @@
#define E3_OVERCURRENT 2000 #define E3_OVERCURRENT 2000
#define E3_STALLCURRENT 1500 #define E3_STALLCURRENT 1500
#define E4_MICROSTEPS 16
#define E4_K_VAL 50
#define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500
#endif #endif
/** /**

2
Marlin/example_configurations/delta/kossel_pro/Configuration.h
View file

@ -146,7 +146,7 @@
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

12
Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
View file

@ -812,6 +812,7 @@
//#define E1_IS_TMC //#define E1_IS_TMC
//#define E2_IS_TMC //#define E2_IS_TMC
//#define E3_IS_TMC //#define E3_IS_TMC
//#define E4_IS_TMC
#define X_MAX_CURRENT 1000 // in mA #define X_MAX_CURRENT 1000 // in mA
#define X_SENSE_RESISTOR 91 // in mOhms #define X_SENSE_RESISTOR 91 // in mOhms
@ -853,6 +854,10 @@
#define E3_SENSE_RESISTOR 91 #define E3_SENSE_RESISTOR 91
#define E3_MICROSTEPS 16 #define E3_MICROSTEPS 16
#define E4_MAX_CURRENT 1000
#define E4_SENSE_RESISTOR 91
#define E4_MICROSTEPS 16
#endif #endif
// @section TMC2130 // @section TMC2130
@ -894,6 +899,7 @@
//#define E1_IS_TMC2130 //#define E1_IS_TMC2130
//#define E2_IS_TMC2130 //#define E2_IS_TMC2130
//#define E3_IS_TMC2130 //#define E3_IS_TMC2130
//#define E4_IS_TMC2130
/** /**
* Stepper driver settings * Stepper driver settings
@ -979,6 +985,7 @@
//#define E1_IS_L6470 //#define E1_IS_L6470
//#define E2_IS_L6470 //#define E2_IS_L6470
//#define E3_IS_L6470 //#define E3_IS_L6470
//#define E4_IS_L6470
#define X_MICROSTEPS 16 // number of microsteps #define X_MICROSTEPS 16 // number of microsteps
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
@ -1030,6 +1037,11 @@
#define E3_OVERCURRENT 2000 #define E3_OVERCURRENT 2000
#define E3_STALLCURRENT 1500 #define E3_STALLCURRENT 1500
#define E4_MICROSTEPS 16
#define E4_K_VAL 50
#define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500
#endif #endif
/** /**

2
Marlin/example_configurations/delta/kossel_xl/Configuration.h
View file

@ -142,7 +142,7 @@
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

12
Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
View file

@ -807,6 +807,7 @@
//#define E1_IS_TMC //#define E1_IS_TMC
//#define E2_IS_TMC //#define E2_IS_TMC
//#define E3_IS_TMC //#define E3_IS_TMC
//#define E4_IS_TMC
#define X_MAX_CURRENT 1000 // in mA #define X_MAX_CURRENT 1000 // in mA
#define X_SENSE_RESISTOR 91 // in mOhms #define X_SENSE_RESISTOR 91 // in mOhms
@ -848,6 +849,10 @@
#define E3_SENSE_RESISTOR 91 #define E3_SENSE_RESISTOR 91
#define E3_MICROSTEPS 16 #define E3_MICROSTEPS 16
#define E4_MAX_CURRENT 1000
#define E4_SENSE_RESISTOR 91
#define E4_MICROSTEPS 16
#endif #endif
// @section TMC2130 // @section TMC2130
@ -889,6 +894,7 @@
//#define E1_IS_TMC2130 //#define E1_IS_TMC2130
//#define E2_IS_TMC2130 //#define E2_IS_TMC2130
//#define E3_IS_TMC2130 //#define E3_IS_TMC2130
//#define E4_IS_TMC2130
/** /**
* Stepper driver settings * Stepper driver settings
@ -974,6 +980,7 @@
//#define E1_IS_L6470 //#define E1_IS_L6470
//#define E2_IS_L6470 //#define E2_IS_L6470
//#define E3_IS_L6470 //#define E3_IS_L6470
//#define E4_IS_L6470
#define X_MICROSTEPS 16 // number of microsteps #define X_MICROSTEPS 16 // number of microsteps
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
@ -1025,6 +1032,11 @@
#define E3_OVERCURRENT 2000 #define E3_OVERCURRENT 2000
#define E3_STALLCURRENT 1500 #define E3_STALLCURRENT 1500
#define E4_MICROSTEPS 16
#define E4_K_VAL 50
#define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500
#endif #endif
/** /**

2
Marlin/example_configurations/makibox/Configuration.h
View file

@ -142,7 +142,7 @@
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

12
Marlin/example_configurations/makibox/Configuration_adv.h
View file

@ -805,6 +805,7 @@
//#define E1_IS_TMC //#define E1_IS_TMC
//#define E2_IS_TMC //#define E2_IS_TMC
//#define E3_IS_TMC //#define E3_IS_TMC
//#define E4_IS_TMC
#define X_MAX_CURRENT 1000 // in mA #define X_MAX_CURRENT 1000 // in mA
#define X_SENSE_RESISTOR 91 // in mOhms #define X_SENSE_RESISTOR 91 // in mOhms
@ -846,6 +847,10 @@
#define E3_SENSE_RESISTOR 91 #define E3_SENSE_RESISTOR 91
#define E3_MICROSTEPS 16 #define E3_MICROSTEPS 16
#define E4_MAX_CURRENT 1000
#define E4_SENSE_RESISTOR 91
#define E4_MICROSTEPS 16
#endif #endif
// @section TMC2130 // @section TMC2130
@ -887,6 +892,7 @@
//#define E1_IS_TMC2130 //#define E1_IS_TMC2130
//#define E2_IS_TMC2130 //#define E2_IS_TMC2130
//#define E3_IS_TMC2130 //#define E3_IS_TMC2130
//#define E4_IS_TMC2130
/** /**
* Stepper driver settings * Stepper driver settings
@ -972,6 +978,7 @@
//#define E1_IS_L6470 //#define E1_IS_L6470
//#define E2_IS_L6470 //#define E2_IS_L6470
//#define E3_IS_L6470 //#define E3_IS_L6470
//#define E4_IS_L6470
#define X_MICROSTEPS 16 // number of microsteps #define X_MICROSTEPS 16 // number of microsteps
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
@ -1023,6 +1030,11 @@
#define E3_OVERCURRENT 2000 #define E3_OVERCURRENT 2000
#define E3_STALLCURRENT 1500 #define E3_STALLCURRENT 1500
#define E4_MICROSTEPS 16
#define E4_K_VAL 50
#define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500
#endif #endif
/** /**

2
Marlin/example_configurations/tvrrug/Round2/Configuration.h
View file

@ -142,7 +142,7 @@
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
// This defines the number of extruders // This defines the number of extruders
// :[1, 2, 3, 4] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical // Enable if your E steppers or extruder gear ratios are not identical

12
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
View file

@ -805,6 +805,7 @@
//#define E1_IS_TMC //#define E1_IS_TMC
//#define E2_IS_TMC //#define E2_IS_TMC
//#define E3_IS_TMC //#define E3_IS_TMC
//#define E4_IS_TMC
#define X_MAX_CURRENT 1000 // in mA #define X_MAX_CURRENT 1000 // in mA
#define X_SENSE_RESISTOR 91 // in mOhms #define X_SENSE_RESISTOR 91 // in mOhms
@ -846,6 +847,10 @@
#define E3_SENSE_RESISTOR 91 #define E3_SENSE_RESISTOR 91
#define E3_MICROSTEPS 16 #define E3_MICROSTEPS 16
#define E4_MAX_CURRENT 1000
#define E4_SENSE_RESISTOR 91
#define E4_MICROSTEPS 16
#endif #endif
// @section TMC2130 // @section TMC2130
@ -887,6 +892,7 @@
//#define E1_IS_TMC2130 //#define E1_IS_TMC2130
//#define E2_IS_TMC2130 //#define E2_IS_TMC2130
//#define E3_IS_TMC2130 //#define E3_IS_TMC2130
//#define E4_IS_TMC2130
/** /**
* Stepper driver settings * Stepper driver settings
@ -972,6 +978,7 @@
//#define E1_IS_L6470 //#define E1_IS_L6470
//#define E2_IS_L6470 //#define E2_IS_L6470
//#define E3_IS_L6470 //#define E3_IS_L6470
//#define E4_IS_L6470
#define X_MICROSTEPS 16 // number of microsteps #define X_MICROSTEPS 16 // number of microsteps
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
@ -1023,6 +1030,11 @@
#define E3_OVERCURRENT 2000 #define E3_OVERCURRENT 2000
#define E3_STALLCURRENT 1500 #define E3_STALLCURRENT 1500
#define E4_MICROSTEPS 16
#define E4_K_VAL 50
#define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500
#endif #endif
/** /**

1
Marlin/language_an.h
View file

@ -112,6 +112,7 @@
#define MSG_E2STEPS _UxGT("E2 trangos/mm") #define MSG_E2STEPS _UxGT("E2 trangos/mm")
#define MSG_E3STEPS _UxGT("E3 trangos/mm") #define MSG_E3STEPS _UxGT("E3 trangos/mm")
#define MSG_E4STEPS _UxGT("E4 trangos/mm") #define MSG_E4STEPS _UxGT("E4 trangos/mm")
#define MSG_E5STEPS _UxGT("E5 trangos/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Movimiento") #define MSG_MOTION _UxGT("Movimiento")
#define MSG_VOLUMETRIC _UxGT("Filamento") #define MSG_VOLUMETRIC _UxGT("Filamento")

1
Marlin/language_bg.h
View file

@ -113,6 +113,7 @@
#define MSG_E2STEPS _UxGT("E2 стъпки/mm") #define MSG_E2STEPS _UxGT("E2 стъпки/mm")
#define MSG_E3STEPS _UxGT("E3 стъпки/mm") #define MSG_E3STEPS _UxGT("E3 стъпки/mm")
#define MSG_E4STEPS _UxGT("E4 стъпки/mm") #define MSG_E4STEPS _UxGT("E4 стъпки/mm")
#define MSG_E5STEPS _UxGT("E5 стъпки/mm")
#define MSG_TEMPERATURE _UxGT("Температура") #define MSG_TEMPERATURE _UxGT("Температура")
#define MSG_MOTION _UxGT("Движение") #define MSG_MOTION _UxGT("Движение")
#define MSG_VOLUMETRIC _UxGT("Нишка") #define MSG_VOLUMETRIC _UxGT("Нишка")

1
Marlin/language_ca.h
View file

@ -117,6 +117,7 @@
#define MSG_E2STEPS _UxGT("E2passos/mm") #define MSG_E2STEPS _UxGT("E2passos/mm")
#define MSG_E3STEPS _UxGT("E3passos/mm") #define MSG_E3STEPS _UxGT("E3passos/mm")
#define MSG_E4STEPS _UxGT("E4passos/mm") #define MSG_E4STEPS _UxGT("E4passos/mm")
#define MSG_E5STEPS _UxGT("E5passos/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Moviment") #define MSG_MOTION _UxGT("Moviment")
#define MSG_VOLUMETRIC _UxGT("Filament") #define MSG_VOLUMETRIC _UxGT("Filament")

1
Marlin/language_cn.h
View file

@ -105,6 +105,7 @@
#define MSG_E2STEPS "E2steps/mm" #define MSG_E2STEPS "E2steps/mm"
#define MSG_E3STEPS "E3steps/mm" #define MSG_E3STEPS "E3steps/mm"
#define MSG_E4STEPS "E4steps/mm" #define MSG_E4STEPS "E4steps/mm"
#define MSG_E5STEPS "E5steps/mm"
#define MSG_TEMPERATURE "\xc9\xd2" #define MSG_TEMPERATURE "\xc9\xd2"
#define MSG_MOTION "\xdf\xb2" #define MSG_MOTION "\xdf\xb2"
#define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC "Filament"

1
Marlin/language_cz.h
View file

@ -116,6 +116,7 @@
#define MSG_E2STEPS _UxGT("E2kroku/mm") #define MSG_E2STEPS _UxGT("E2kroku/mm")
#define MSG_E3STEPS _UxGT("E3kroku/mm") #define MSG_E3STEPS _UxGT("E3kroku/mm")
#define MSG_E4STEPS _UxGT("E4kroku/mm") #define MSG_E4STEPS _UxGT("E4kroku/mm")
#define MSG_E5STEPS _UxGT("E5kroku/mm")
#define MSG_TEMPERATURE _UxGT("Teplota") #define MSG_TEMPERATURE _UxGT("Teplota")
#define MSG_MOTION _UxGT("Pohyb") #define MSG_MOTION _UxGT("Pohyb")
#define MSG_VOLUMETRIC _UxGT("Filament") #define MSG_VOLUMETRIC _UxGT("Filament")

1
Marlin/language_da.h
View file

@ -114,6 +114,7 @@
#define MSG_E2STEPS _UxGT("E2steps/mm") #define MSG_E2STEPS _UxGT("E2steps/mm")
#define MSG_E3STEPS _UxGT("E3steps/mm") #define MSG_E3STEPS _UxGT("E3steps/mm")
#define MSG_E4STEPS _UxGT("E4steps/mm") #define MSG_E4STEPS _UxGT("E4steps/mm")
#define MSG_E5STEPS _UxGT("E5steps/mm")
#define MSG_TEMPERATURE _UxGT("Temperatur") #define MSG_TEMPERATURE _UxGT("Temperatur")
#define MSG_MOTION _UxGT("Bevægelse") #define MSG_MOTION _UxGT("Bevægelse")
#define MSG_VOLUMETRIC _UxGT("Filament") #define MSG_VOLUMETRIC _UxGT("Filament")

1
Marlin/language_de.h
View file

@ -118,6 +118,7 @@
#define MSG_E2STEPS _UxGT("E2 Steps/mm") #define MSG_E2STEPS _UxGT("E2 Steps/mm")
#define MSG_E3STEPS _UxGT("E3 Steps/mm") #define MSG_E3STEPS _UxGT("E3 Steps/mm")
#define MSG_E4STEPS _UxGT("E4 Steps/mm") #define MSG_E4STEPS _UxGT("E4 Steps/mm")
#define MSG_E5STEPS _UxGT("E5 Steps/mm")
#define MSG_TEMPERATURE _UxGT("Temperatur") #define MSG_TEMPERATURE _UxGT("Temperatur")
#define MSG_MOTION _UxGT("Bewegung") #define MSG_MOTION _UxGT("Bewegung")
#define MSG_VOLUMETRIC _UxGT("Filament") #define MSG_VOLUMETRIC _UxGT("Filament")

1
Marlin/language_el-gr.h
View file

@ -112,6 +112,7 @@
#define MSG_E2STEPS _UxGT("Bήματα Ε2 ανά μμ") #define MSG_E2STEPS _UxGT("Bήματα Ε2 ανά μμ")
#define MSG_E3STEPS _UxGT("Bήματα Ε3 ανά μμ") #define MSG_E3STEPS _UxGT("Bήματα Ε3 ανά μμ")
#define MSG_E4STEPS _UxGT("Bήματα Ε4 ανά μμ") #define MSG_E4STEPS _UxGT("Bήματα Ε4 ανά μμ")
#define MSG_E5STEPS _UxGT("Bήματα Ε5 ανά μμ")
#define MSG_TEMPERATURE _UxGT("Θερμοκρασία") #define MSG_TEMPERATURE _UxGT("Θερμοκρασία")
#define MSG_MOTION _UxGT("Κίνηση") #define MSG_MOTION _UxGT("Κίνηση")
#define MSG_VOLUMETRIC _UxGT("Νήμα") #define MSG_VOLUMETRIC _UxGT("Νήμα")

1
Marlin/language_el.h
View file

@ -112,6 +112,7 @@
#define MSG_E2STEPS _UxGT("Bήματα Ε2 ανά μμ") #define MSG_E2STEPS _UxGT("Bήματα Ε2 ανά μμ")
#define MSG_E3STEPS _UxGT("Bήματα Ε3 ανά μμ") #define MSG_E3STEPS _UxGT("Bήματα Ε3 ανά μμ")
#define MSG_E4STEPS _UxGT("Bήματα Ε4 ανά μμ") #define MSG_E4STEPS _UxGT("Bήματα Ε4 ανά μμ")
#define MSG_E5STEPS _UxGT("Bήματα Ε5 ανά μμ")
#define MSG_TEMPERATURE _UxGT("Θερμοκρασία") #define MSG_TEMPERATURE _UxGT("Θερμοκρασία")
#define MSG_MOTION _UxGT("Κίνηση") #define MSG_MOTION _UxGT("Κίνηση")
#define MSG_VOLUMETRIC _UxGT("Νήμα") #define MSG_VOLUMETRIC _UxGT("Νήμα")

3
Marlin/language_en.h
View file

@ -291,6 +291,9 @@
#ifndef MSG_E4STEPS #ifndef MSG_E4STEPS
#define MSG_E4STEPS _UxGT("E4steps/mm") #define MSG_E4STEPS _UxGT("E4steps/mm")
#endif #endif
#ifndef MSG_E5STEPS
#define MSG_E5STEPS _UxGT("E5steps/mm")
#endif
#ifndef MSG_TEMPERATURE #ifndef MSG_TEMPERATURE
#define MSG_TEMPERATURE _UxGT("Temperature") #define MSG_TEMPERATURE _UxGT("Temperature")
#endif #endif

1
Marlin/language_es.h
View file

@ -116,6 +116,7 @@
#define MSG_E2STEPS _UxGT("E2 pasos/mm") #define MSG_E2STEPS _UxGT("E2 pasos/mm")
#define MSG_E3STEPS _UxGT("E3 pasos/mm") #define MSG_E3STEPS _UxGT("E3 pasos/mm")
#define MSG_E4STEPS _UxGT("E4 pasos/mm") #define MSG_E4STEPS _UxGT("E4 pasos/mm")
#define MSG_E5STEPS _UxGT("E5 pasos/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Movimiento") #define MSG_MOTION _UxGT("Movimiento")
#define MSG_VOLUMETRIC _UxGT("Filamento") #define MSG_VOLUMETRIC _UxGT("Filamento")

1
Marlin/language_eu.h
View file

@ -103,6 +103,7 @@
#define MSG_E2STEPS _UxGT("E2 pausoak/mm") #define MSG_E2STEPS _UxGT("E2 pausoak/mm")
#define MSG_E3STEPS _UxGT("E3 pausoak/mm") #define MSG_E3STEPS _UxGT("E3 pausoak/mm")
#define MSG_E4STEPS _UxGT("E4 pausoak/mm") #define MSG_E4STEPS _UxGT("E4 pausoak/mm")
#define MSG_E5STEPS _UxGT("E5 pausoak/mm")
#define MSG_TEMPERATURE _UxGT("Tenperatura") #define MSG_TEMPERATURE _UxGT("Tenperatura")
#define MSG_MOTION _UxGT("Mugimendua") #define MSG_MOTION _UxGT("Mugimendua")
#define MSG_VOLUMETRIC _UxGT("Filament") #define MSG_VOLUMETRIC _UxGT("Filament")

1
Marlin/language_fi.h
View file

@ -104,6 +104,7 @@
#define MSG_E2STEPS _UxGT("E2steps/mm") #define MSG_E2STEPS _UxGT("E2steps/mm")
#define MSG_E3STEPS _UxGT("E3steps/mm") #define MSG_E3STEPS _UxGT("E3steps/mm")
#define MSG_E4STEPS _UxGT("E4steps/mm") #define MSG_E4STEPS _UxGT("E4steps/mm")
#define MSG_E5STEPS _UxGT("E5steps/mm")
#define MSG_TEMPERATURE _UxGT("Lämpötila") #define MSG_TEMPERATURE _UxGT("Lämpötila")
#define MSG_MOTION _UxGT("Liike") #define MSG_MOTION _UxGT("Liike")
#define MSG_VOLUMETRIC _UxGT("Filament") #define MSG_VOLUMETRIC _UxGT("Filament")

1
Marlin/language_fr.h
View file

@ -117,6 +117,7 @@
#define MSG_E2STEPS _UxGT("E2pas/mm") #define MSG_E2STEPS _UxGT("E2pas/mm")
#define MSG_E3STEPS _UxGT("E3pas/mm") #define MSG_E3STEPS _UxGT("E3pas/mm")
#define MSG_E4STEPS _UxGT("E4pas/mm") #define MSG_E4STEPS _UxGT("E4pas/mm")
#define MSG_E5STEPS _UxGT("E5pas/mm")
#define MSG_TEMPERATURE _UxGT("Tempzrature") #define MSG_TEMPERATURE _UxGT("Tempzrature")
#define MSG_MOTION _UxGT("Mouvement") #define MSG_MOTION _UxGT("Mouvement")
#define MSG_VOLUMETRIC _UxGT("Filament") #define MSG_VOLUMETRIC _UxGT("Filament")

1
Marlin/language_gl.h
View file

@ -113,6 +113,7 @@
#define MSG_E2STEPS _UxGT("E2pasos/mm") #define MSG_E2STEPS _UxGT("E2pasos/mm")
#define MSG_E3STEPS _UxGT("E3pasos/mm") #define MSG_E3STEPS _UxGT("E3pasos/mm")
#define MSG_E4STEPS _UxGT("E4pasos/mm") #define MSG_E4STEPS _UxGT("E4pasos/mm")
#define MSG_E5STEPS _UxGT("E5pasos/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Movemento") #define MSG_MOTION _UxGT("Movemento")
#define MSG_VOLUMETRIC _UxGT("Filamento") #define MSG_VOLUMETRIC _UxGT("Filamento")

1
Marlin/language_hr.h
View file

@ -112,6 +112,7 @@
#define MSG_E2STEPS _UxGT("E2steps/mm") #define MSG_E2STEPS _UxGT("E2steps/mm")
#define MSG_E3STEPS _UxGT("E3steps/mm") #define MSG_E3STEPS _UxGT("E3steps/mm")
#define MSG_E4STEPS _UxGT("E4steps/mm") #define MSG_E4STEPS _UxGT("E4steps/mm")
#define MSG_E5STEPS _UxGT("E5steps/mm")
#define MSG_TEMPERATURE _UxGT("Temperature") #define MSG_TEMPERATURE _UxGT("Temperature")
#define MSG_MOTION _UxGT("Gibanje") #define MSG_MOTION _UxGT("Gibanje")
#define MSG_VOLUMETRIC _UxGT("Filament") #define MSG_VOLUMETRIC _UxGT("Filament")

1
Marlin/language_it.h
View file

@ -120,6 +120,7 @@
#define MSG_E2STEPS _UxGT("E2passi/mm") #define MSG_E2STEPS _UxGT("E2passi/mm")
#define MSG_E3STEPS _UxGT("E3passi/mm") #define MSG_E3STEPS _UxGT("E3passi/mm")
#define MSG_E4STEPS _UxGT("E4passi/mm") #define MSG_E4STEPS _UxGT("E4passi/mm")
#define MSG_E5STEPS _UxGT("E5passi/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Movimento") #define MSG_MOTION _UxGT("Movimento")
#define MSG_VOLUMETRIC _UxGT("Filamento") #define MSG_VOLUMETRIC _UxGT("Filamento")

2
Marlin/language_kana.h
View file

@ -137,6 +137,7 @@
#define MSG_E2STEPS "E2steps/mm" #define MSG_E2STEPS "E2steps/mm"
#define MSG_E3STEPS "E3steps/mm" #define MSG_E3STEPS "E3steps/mm"
#define MSG_E4STEPS "E4steps/mm" #define MSG_E4STEPS "E4steps/mm"
#define MSG_E5STEPS "E5steps/mm"
#else #else
#define MSG_XSTEPS "Xsteps" #define MSG_XSTEPS "Xsteps"
#define MSG_YSTEPS "Ysteps" #define MSG_YSTEPS "Ysteps"
@ -146,6 +147,7 @@
#define MSG_E2STEPS "E2steps" #define MSG_E2STEPS "E2steps"
#define MSG_E3STEPS "E3steps" #define MSG_E3STEPS "E3steps"
#define MSG_E4STEPS "E4steps" #define MSG_E4STEPS "E4steps"
#define MSG_E5STEPS "E5steps"
#endif #endif
#define MSG_TEMPERATURE "\xb5\xdd\xc4\xde" // "ｵﾝﾄﾞ" ("Temperature") #define MSG_TEMPERATURE "\xb5\xdd\xc4\xde" // "ｵﾝﾄﾞ" ("Temperature")
#define MSG_MOTION "\xb3\xba\xde\xb7\xbe\xaf\xc3\xb2" // "ｳｺﾞｷｾｯﾃｲ" ("Motion") #define MSG_MOTION "\xb3\xba\xde\xb7\xbe\xaf\xc3\xb2" // "ｳｺﾞｷｾｯﾃｲ" ("Motion")

1
Marlin/language_kana_utf8.h
View file

@ -122,6 +122,7 @@
#define MSG_E2STEPS _UxGT("E2steps/mm") #define MSG_E2STEPS _UxGT("E2steps/mm")
#define MSG_E3STEPS _UxGT("E3steps/mm") #define MSG_E3STEPS _UxGT("E3steps/mm")
#define MSG_E4STEPS _UxGT("E4steps/mm") #define MSG_E4STEPS _UxGT("E4steps/mm")
#define MSG_E5STEPS _UxGT("E5steps/mm")
#define MSG_TEMPERATURE _UxGT("オンド") // "Temperature" #define MSG_TEMPERATURE _UxGT("オンド") // "Temperature"
#define MSG_MOTION _UxGT("ウゴキセッテイ") // "Motion" #define MSG_MOTION _UxGT("ウゴキセッテイ") // "Motion"
#define MSG_VOLUMETRIC _UxGT("フィラメント") // "Filament" #define MSG_VOLUMETRIC _UxGT("フィラメント") // "Filament"

1
Marlin/language_nl.h
View file

@ -112,6 +112,7 @@
#define MSG_E2STEPS _UxGT("E2steps/mm") #define MSG_E2STEPS _UxGT("E2steps/mm")
#define MSG_E3STEPS _UxGT("E3steps/mm") #define MSG_E3STEPS _UxGT("E3steps/mm")
#define MSG_E4STEPS _UxGT("E4steps/mm") #define MSG_E4STEPS _UxGT("E4steps/mm")
#define MSG_E5STEPS _UxGT("E5steps/mm")
#define MSG_TEMPERATURE _UxGT("Temperatuur") #define MSG_TEMPERATURE _UxGT("Temperatuur")
#define MSG_MOTION _UxGT("Beweging") #define MSG_MOTION _UxGT("Beweging")
#define MSG_VOLUMETRIC _UxGT("Filament") #define MSG_VOLUMETRIC _UxGT("Filament")

1
Marlin/language_pl.h
View file

@ -112,6 +112,7 @@
#define MSG_E2STEPS _UxGT("krokiE2/mm") #define MSG_E2STEPS _UxGT("krokiE2/mm")
#define MSG_E3STEPS _UxGT("krokiE3/mm") #define MSG_E3STEPS _UxGT("krokiE3/mm")
#define MSG_E4STEPS _UxGT("krokiE4/mm") #define MSG_E4STEPS _UxGT("krokiE4/mm")
#define MSG_E5STEPS _UxGT("krokiE5/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Ruch") #define MSG_MOTION _UxGT("Ruch")
#define MSG_VOLUMETRIC _UxGT("Filament") #define MSG_VOLUMETRIC _UxGT("Filament")

1
Marlin/language_pt-br.h
View file

@ -105,6 +105,7 @@
#define MSG_E2STEPS "E2/mm" #define MSG_E2STEPS "E2/mm"
#define MSG_E3STEPS "E3/mm" #define MSG_E3STEPS "E3/mm"
#define MSG_E4STEPS "E4/mm" #define MSG_E4STEPS "E4/mm"
#define MSG_E5STEPS "E5/mm"
#define MSG_TEMPERATURE "Temperatura" #define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimento" #define MSG_MOTION "Movimento"
#define MSG_VOLUMETRIC "Filamento" #define MSG_VOLUMETRIC "Filamento"

1
Marlin/language_pt-br_utf8.h
View file

@ -105,6 +105,7 @@
#define MSG_E2STEPS _UxGT("E2/mm") #define MSG_E2STEPS _UxGT("E2/mm")
#define MSG_E3STEPS _UxGT("E3/mm") #define MSG_E3STEPS _UxGT("E3/mm")
#define MSG_E4STEPS _UxGT("E4/mm") #define MSG_E4STEPS _UxGT("E4/mm")
#define MSG_E5STEPS _UxGT("E5/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Movimento") #define MSG_MOTION _UxGT("Movimento")
#define MSG_VOLUMETRIC _UxGT("Filamento") #define MSG_VOLUMETRIC _UxGT("Filamento")

1
Marlin/language_pt.h
View file

@ -109,6 +109,7 @@
#define MSG_E2STEPS "E2 passo/mm" #define MSG_E2STEPS "E2 passo/mm"
#define MSG_E3STEPS "E3 passo/mm" #define MSG_E3STEPS "E3 passo/mm"
#define MSG_E4STEPS "E4 passo/mm" #define MSG_E4STEPS "E4 passo/mm"
#define MSG_E5STEPS "E5 passo/mm"
#define MSG_TEMPERATURE "Temperatura" #define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimento" #define MSG_MOTION "Movimento"
#define MSG_VOLUMETRIC "Filamento" #define MSG_VOLUMETRIC "Filamento"

1
Marlin/language_pt_utf8.h
View file

@ -109,6 +109,7 @@
#define MSG_E2STEPS _UxGT("E2 passo/mm") #define MSG_E2STEPS _UxGT("E2 passo/mm")
#define MSG_E3STEPS _UxGT("E3 passo/mm") #define MSG_E3STEPS _UxGT("E3 passo/mm")
#define MSG_E4STEPS _UxGT("E4 passo/mm") #define MSG_E4STEPS _UxGT("E4 passo/mm")
#define MSG_E5STEPS _UxGT("E5 passo/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Movimento") #define MSG_MOTION _UxGT("Movimento")
#define MSG_VOLUMETRIC _UxGT("Filamento") #define MSG_VOLUMETRIC _UxGT("Filamento")

1
Marlin/language_tr.h
View file

@ -117,6 +117,7 @@
#define MSG_E2STEPS _UxGT("E2steps/mm") // E2steps/mm #define MSG_E2STEPS _UxGT("E2steps/mm") // E2steps/mm
#define MSG_E3STEPS _UxGT("E3steps/mm") // E3steps/mm #define MSG_E3STEPS _UxGT("E3steps/mm") // E3steps/mm
#define MSG_E4STEPS _UxGT("E4steps/mm") // E4steps/mm #define MSG_E4STEPS _UxGT("E4steps/mm") // E4steps/mm
#define MSG_E5STEPS _UxGT("E5steps/mm") // E4steps/mm
#define MSG_TEMPERATURE _UxGT("Sıcaklık") // Sıcaklık #define MSG_TEMPERATURE _UxGT("Sıcaklık") // Sıcaklık
#define MSG_MOTION _UxGT("Hareket") // Hareket #define MSG_MOTION _UxGT("Hareket") // Hareket
#define MSG_VOLUMETRIC _UxGT("Filaman") // Filaman #define MSG_VOLUMETRIC _UxGT("Filaman") // Filaman

1
Marlin/language_uk.h
View file

@ -113,6 +113,7 @@
#define MSG_E2STEPS _UxGT("E2кроків/мм") #define MSG_E2STEPS _UxGT("E2кроків/мм")
#define MSG_E3STEPS _UxGT("E3кроків/мм") #define MSG_E3STEPS _UxGT("E3кроків/мм")
#define MSG_E4STEPS _UxGT("E4кроків/мм") #define MSG_E4STEPS _UxGT("E4кроків/мм")
#define MSG_E5STEPS _UxGT("E5кроків/мм")
#define MSG_TEMPERATURE _UxGT("Температура") #define MSG_TEMPERATURE _UxGT("Температура")
#define MSG_MOTION _UxGT("Рух") #define MSG_MOTION _UxGT("Рух")
#define MSG_VOLUMETRIC _UxGT("Волокно") #define MSG_VOLUMETRIC _UxGT("Волокно")

6
Marlin/pinsDebug_list.h
View file

@ -212,6 +212,9 @@
#if PIN_EXISTS(E3_STEP) #if PIN_EXISTS(E3_STEP)
REPORT_NAME_DIGITAL(E3_STEP_PIN, __LINE__ ) REPORT_NAME_DIGITAL(E3_STEP_PIN, __LINE__ )
#endif #endif
#if PIN_EXISTS(E4_AUTO_FAN)
REPORT_NAME_DIGITAL(E4_AUTO_FAN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E4_DIR) #if PIN_EXISTS(E4_DIR)
REPORT_NAME_DIGITAL(E4_DIR_PIN, __LINE__ ) REPORT_NAME_DIGITAL(E4_DIR_PIN, __LINE__ )
#endif #endif
@ -434,6 +437,9 @@
#if PIN_EXISTS(ORIG_E3_AUTO_FAN) #if PIN_EXISTS(ORIG_E3_AUTO_FAN)
REPORT_NAME_DIGITAL(ORIG_E3_AUTO_FAN_PIN, __LINE__ ) REPORT_NAME_DIGITAL(ORIG_E3_AUTO_FAN_PIN, __LINE__ )
#endif #endif
#if PIN_EXISTS(ORIG_E4_AUTO_FAN)
REPORT_NAME_DIGITAL(ORIG_E4_AUTO_FAN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(PHOTOGRAPH) #if PIN_EXISTS(PHOTOGRAPH)
REPORT_NAME_DIGITAL(PHOTOGRAPH_PIN, __LINE__ ) REPORT_NAME_DIGITAL(PHOTOGRAPH_PIN, __LINE__ )
#endif #endif

7
Marlin/stepper.cpp
View file

@ -931,6 +931,9 @@ void Stepper::init() {
#if HAS_E3_DIR #if HAS_E3_DIR
E3_DIR_INIT; E3_DIR_INIT;
#endif #endif
#if HAS_E4_DIR
E4_DIR_INIT;
#endif
// Init Enable Pins - steppers default to disabled. // Init Enable Pins - steppers default to disabled.
#if HAS_X_ENABLE #if HAS_X_ENABLE
@ -973,6 +976,10 @@ void Stepper::init() {
E3_ENABLE_INIT; E3_ENABLE_INIT;
if (!E_ENABLE_ON) E3_ENABLE_WRITE(HIGH); if (!E_ENABLE_ON) E3_ENABLE_WRITE(HIGH);
#endif #endif
#if HAS_E4_ENABLE
E4_ENABLE_INIT;
if (!E_ENABLE_ON) E4_ENABLE_WRITE(HIGH);
#endif
// Init endstops and pullups // Init endstops and pullups
endstops.init(); endstops.init();

18
Marlin/stepper_indirection.cpp
View file

@ -75,6 +75,9 @@
#if ENABLED(E3_IS_TMC) #if ENABLED(E3_IS_TMC)
_TMC_DEFINE(E3); _TMC_DEFINE(E3);
#endif #endif
#if ENABLED(E4_IS_TMC)
_TMC_DEFINE(E4);
#endif
#define _TMC_INIT(A) do{ \ #define _TMC_INIT(A) do{ \
stepper##A.setMicrosteps(A##_MICROSTEPS); \ stepper##A.setMicrosteps(A##_MICROSTEPS); \
@ -112,6 +115,9 @@
#if ENABLED(E3_IS_TMC) #if ENABLED(E3_IS_TMC)
_TMC_INIT(E3); _TMC_INIT(E3);
#endif #endif
#if ENABLED(E4_IS_TMC)
_TMC_INIT(E4);
#endif
} }
#endif // HAVE_TMCDRIVER #endif // HAVE_TMCDRIVER
@ -157,6 +163,9 @@
#if ENABLED(E3_IS_TMC2130) #if ENABLED(E3_IS_TMC2130)
_TMC2130_DEFINE(E3); _TMC2130_DEFINE(E3);
#endif #endif
#if ENABLED(E4_IS_TMC2130)
_TMC2130_DEFINE(E4);
#endif
// Use internal reference voltage for current calculations. This is the default. // Use internal reference voltage for current calculations. This is the default.
// Following values from Trinamic's spreadsheet with values for a NEMA17 (42BYGHW609) // Following values from Trinamic's spreadsheet with values for a NEMA17 (42BYGHW609)
@ -213,6 +222,9 @@
#if ENABLED(E3_IS_TMC2130) #if ENABLED(E3_IS_TMC2130)
_TMC2130_INIT(E3); _TMC2130_INIT(E3);
#endif #endif
#if ENABLED(E4_IS_TMC2130)
_TMC2130_INIT(E4);
#endif
TMC2130_ADV() TMC2130_ADV()
} }
@ -260,6 +272,9 @@
#if ENABLED(E3_IS_L6470) #if ENABLED(E3_IS_L6470)
_L6470_DEFINE(E3); _L6470_DEFINE(E3);
#endif #endif
#if ENABLED(E4_IS_L6470)
_L6470_DEFINE(E4);
#endif
#define _L6470_INIT(A) do{ \ #define _L6470_INIT(A) do{ \
stepper##A.init(A##_K_VAL); \ stepper##A.init(A##_K_VAL); \
@ -300,6 +315,9 @@
#if ENABLED(E3_IS_L6470) #if ENABLED(E3_IS_L6470)
_L6470_INIT(E3); _L6470_INIT(E3);
#endif #endif
#if ENABLED(E4_IS_L6470)
_L6470_INIT(E4);
#endif
} }
#endif // HAVE_L6470DRIVER #endif // HAVE_L6470DRIVER

31
Marlin/stepper_indirection.h
View file

@ -381,6 +381,37 @@
#define E3_STEP_WRITE(STATE) WRITE(E3_STEP_PIN,STATE) #define E3_STEP_WRITE(STATE) WRITE(E3_STEP_PIN,STATE)
#define E3_STEP_READ READ(E3_STEP_PIN) #define E3_STEP_READ READ(E3_STEP_PIN)
// E4 Stepper
#if ENABLED(HAVE_L6470DRIVER) && ENABLED(E4_IS_L6470)
extern L6470 stepperE4;
#define E4_ENABLE_INIT NOOP
#define E4_ENABLE_WRITE(STATE) do{ if (STATE) stepperE4.Step_Clock(stepperE4.getStatus() & STATUS_HIZ); else stepperE4.softFree(); }while(0)
#define E4_ENABLE_READ (stepperE4.getStatus() & STATUS_HIZ)
#define E4_DIR_INIT NOOP
#define E4_DIR_WRITE(STATE) stepperE4.Step_Clock(STATE)
#define E4_DIR_READ (stepperE4.getStatus() & STATUS_DIR)
#else
#if ENABLED(HAVE_TMCDRIVER) && ENABLED(E4_IS_TMC)
extern TMC26XStepper stepperE4;
#define E4_ENABLE_INIT NOOP
#define E4_ENABLE_WRITE(STATE) stepperE4.setEnabled(STATE)
#define E4_ENABLE_READ stepperE4.isEnabled()
#else
#if ENABLED(HAVE_TMC2130) && ENABLED(E4_IS_TMC2130)
extern TMC2130Stepper stepperE4;
#endif
#define E4_ENABLE_INIT SET_OUTPUT(E4_ENABLE_PIN)
#define E4_ENABLE_WRITE(STATE) WRITE(E4_ENABLE_PIN,STATE)
#define E4_ENABLE_READ READ(E4_ENABLE_PIN)
#endif
#define E4_DIR_INIT SET_OUTPUT(E4_DIR_PIN)
#define E4_DIR_WRITE(STATE) WRITE(E4_DIR_PIN,STATE)
#define E4_DIR_READ READ(E4_DIR_PIN)
#endif
#define E4_STEP_INIT SET_OUTPUT(E4_STEP_PIN)
#define E4_STEP_WRITE(STATE) WRITE(E4_STEP_PIN,STATE)
#define E4_STEP_READ READ(E4_STEP_PIN)
/** /**
* Extruder indirection for the single E axis * Extruder indirection for the single E axis
*/ */

107
Marlin/ultralcd.cpp
View file

@ -918,39 +918,26 @@ void kill_screen(const char* lcd_msg) {
/** /**
* Watch temperature callbacks * Watch temperature callbacks
*/ */
#if HAS_TEMP_HOTEND
#if WATCH_HOTENDS #if WATCH_HOTENDS
#if HAS_TEMP_HOTEND #define _WATCH_FUNC(N) thermalManager.start_watching_heater(N)
void watch_temp_callback_E0() { thermalManager.start_watching_heater(0); }
#if HOTENDS > 1
void watch_temp_callback_E1() { thermalManager.start_watching_heater(1); }
#if HOTENDS > 2
void watch_temp_callback_E2() { thermalManager.start_watching_heater(2); }
#if HOTENDS > 3
void watch_temp_callback_E3() { thermalManager.start_watching_heater(3); }
#if HOTENDS > 4
void watch_temp_callback_E4() { thermalManager.start_watching_heater(4); }
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#endif
#else #else
#if HAS_TEMP_HOTEND #define _WATCH_FUNC(N) NOOP
void watch_temp_callback_E0() {} #endif
void watch_temp_callback_E0() { _WATCH_FUNC(0); }
#if HOTENDS > 1 #if HOTENDS > 1
void watch_temp_callback_E1() {} void watch_temp_callback_E1() { _WATCH_FUNC(1); }
#if HOTENDS > 2 #if HOTENDS > 2
void watch_temp_callback_E2() {} void watch_temp_callback_E2() { _WATCH_FUNC(2); }
#if HOTENDS > 3 #if HOTENDS > 3
void watch_temp_callback_E3() {} void watch_temp_callback_E3() { _WATCH_FUNC(3); }
#if HOTENDS > 4 #if HOTENDS > 4
void watch_temp_callback_E4() {} void watch_temp_callback_E4() { _WATCH_FUNC(4); }
#endif // HOTENDS > 4 #endif // HOTENDS > 4
#endif // HOTENDS > 3 #endif // HOTENDS > 3
#endif // HOTENDS > 2 #endif // HOTENDS > 2
#endif // HOTENDS > 1 #endif // HOTENDS > 1
#endif #endif // HAS_TEMP_HOTEND
#endif
#if WATCH_THE_BED #if WATCH_THE_BED
void watch_temp_callback_bed() { thermalManager.start_watching_bed(); } void watch_temp_callback_bed() { thermalManager.start_watching_bed(); }
@ -1905,10 +1892,13 @@ void kill_screen(const char* lcd_msg) {
case 2: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E3); break; case 2: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E3); break;
#if E_MANUAL > 3 #if E_MANUAL > 3
case 3: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E4); break; case 3: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E4); break;
#endif #if E_MANUAL > 4
#endif case 4: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E5); break;
#endif // E_MANUAL > 4
#endif // E_MANUAL > 3
#endif // E_MANUAL > 2
} }
#endif #endif // E_MANUAL > 1
lcd_implementation_drawedit(pos_label, ftostr41sign(current_position[E_AXIS])); lcd_implementation_drawedit(pos_label, ftostr41sign(current_position[E_AXIS]));
} }
} }
@ -1921,9 +1911,12 @@ void kill_screen(const char* lcd_msg) {
void lcd_move_e2() { _lcd_move_e(2); } void lcd_move_e2() { _lcd_move_e(2); }
#if E_MANUAL > 3 #if E_MANUAL > 3
void lcd_move_e3() { _lcd_move_e(3); } void lcd_move_e3() { _lcd_move_e(3); }
#endif #if E_MANUAL > 4
#endif void lcd_move_e4() { _lcd_move_e(4); }
#endif #endif // E_MANUAL > 4
#endif // E_MANUAL > 3
#endif // E_MANUAL > 2
#endif // E_MANUAL > 1
/** /**
* *
@ -1970,9 +1963,12 @@ void kill_screen(const char* lcd_msg) {
void lcd_move_get_e2_amount() { _lcd_move_distance_menu(E_AXIS, lcd_move_e2); } void lcd_move_get_e2_amount() { _lcd_move_distance_menu(E_AXIS, lcd_move_e2); }
#if E_MANUAL > 3 #if E_MANUAL > 3
void lcd_move_get_e3_amount() { _lcd_move_distance_menu(E_AXIS, lcd_move_e3); } void lcd_move_get_e3_amount() { _lcd_move_distance_menu(E_AXIS, lcd_move_e3); }
#endif #if E_MANUAL > 4
#endif void lcd_move_get_e4_amount() { _lcd_move_distance_menu(E_AXIS, lcd_move_e4); }
#endif #endif // E_MANUAL > 4
#endif // E_MANUAL > 3
#endif // E_MANUAL > 2
#endif // E_MANUAL > 1
/** /**
* *
@ -2033,9 +2029,12 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E3, lcd_move_get_e2_amount); MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E3, lcd_move_get_e2_amount);
#if E_MANUAL > 3 #if E_MANUAL > 3
MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E4, lcd_move_get_e3_amount); MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E4, lcd_move_get_e3_amount);
#endif #if E_MANUAL > 4
#endif MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E5, lcd_move_get_e4_amount);
#endif #endif // E_MANUAL > 4
#endif // E_MANUAL > 3
#endif // E_MANUAL > 2
#endif // E_MANUAL > 1
END_MENU(); END_MENU();
} }
@ -2239,6 +2238,7 @@ void kill_screen(const char* lcd_msg) {
// PID-P E2, PID-I E2, PID-D E2, PID-C E2, PID Autotune E2 // PID-P E2, PID-I E2, PID-D E2, PID-C E2, PID Autotune E2
// PID-P E3, PID-I E3, PID-D E3, PID-C E3, PID Autotune E3 // PID-P E3, PID-I E3, PID-D E3, PID-C E3, PID Autotune E3
// PID-P E4, PID-I E4, PID-D E4, PID-C E4, PID Autotune E4 // PID-P E4, PID-I E4, PID-D E4, PID-C E4, PID Autotune E4
// PID-P E5, PID-I E5, PID-D E5, PID-C E5, PID Autotune E5
// //
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
@ -2350,8 +2350,11 @@ void kill_screen(const char* lcd_msg) {
void _reset_e2_acceleration_rate() { _reset_e_acceleration_rate(2); } void _reset_e2_acceleration_rate() { _reset_e_acceleration_rate(2); }
#if E_STEPPERS > 3 #if E_STEPPERS > 3
void _reset_e3_acceleration_rate() { _reset_e_acceleration_rate(3); } void _reset_e3_acceleration_rate() { _reset_e_acceleration_rate(3); }
#endif #if E_STEPPERS > 4
#endif void _reset_e4_acceleration_rate() { _reset_e_acceleration_rate(4); }
#endif // E_STEPPERS > 4
#endif // E_STEPPERS > 3
#endif // E_STEPPERS > 2
#endif #endif
void _planner_refresh_positioning() { planner.refresh_positioning(); } void _planner_refresh_positioning() { planner.refresh_positioning(); }
@ -2368,8 +2371,11 @@ void kill_screen(const char* lcd_msg) {
void _planner_refresh_e2_positioning() { _reset_e_acceleration_rate(2); } void _planner_refresh_e2_positioning() { _reset_e_acceleration_rate(2); }
#if E_STEPPERS > 3 #if E_STEPPERS > 3
void _planner_refresh_e3_positioning() { _reset_e_acceleration_rate(3); } void _planner_refresh_e3_positioning() { _reset_e_acceleration_rate(3); }
#endif #if E_STEPPERS > 4
#endif void _planner_refresh_e4_positioning() { _reset_e_acceleration_rate(4); }
#endif // E_STEPPERS > 4
#endif // E_STEPPERS > 3
#endif // E_STEPPERS > 2
#endif #endif
/** /**
@ -2411,9 +2417,12 @@ void kill_screen(const char* lcd_msg) {
#if E_STEPPERS > 2 #if E_STEPPERS > 2
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E3, &planner.max_feedrate_mm_s[E_AXIS + 2], 1, 999); MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E3, &planner.max_feedrate_mm_s[E_AXIS + 2], 1, 999);
#if E_STEPPERS > 3 #if E_STEPPERS > 3
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E3, &planner.max_feedrate_mm_s[E_AXIS + 3], 1, 999); MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E4, &planner.max_feedrate_mm_s[E_AXIS + 3], 1, 999);
#endif #if E_STEPPERS > 4
#endif MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E5, &planner.max_feedrate_mm_s[E_AXIS + 4], 1, 999);
#endif // E_STEPPERS > 4
#endif // E_STEPPERS > 3
#endif // E_STEPPERS > 2
#else #else
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E, &planner.max_feedrate_mm_s[E_AXIS], 1, 999); MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E, &planner.max_feedrate_mm_s[E_AXIS], 1, 999);
#endif #endif
@ -2436,8 +2445,11 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E3, &planner.max_acceleration_mm_per_s2[E_AXIS + 2], 100, 99000, _reset_e2_acceleration_rate); MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E3, &planner.max_acceleration_mm_per_s2[E_AXIS + 2], 100, 99000, _reset_e2_acceleration_rate);
#if E_STEPPERS > 3 #if E_STEPPERS > 3
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E4, &planner.max_acceleration_mm_per_s2[E_AXIS + 3], 100, 99000, _reset_e3_acceleration_rate); MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E4, &planner.max_acceleration_mm_per_s2[E_AXIS + 3], 100, 99000, _reset_e3_acceleration_rate);
#endif #if E_STEPPERS > 4
#endif MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E5, &planner.max_acceleration_mm_per_s2[E_AXIS + 4], 100, 99000, _reset_e4_acceleration_rate);
#endif // E_STEPPERS > 4
#endif // E_STEPPERS > 3
#endif // E_STEPPERS > 2
#else #else
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E, &planner.max_acceleration_mm_per_s2[E_AXIS], 100, 99000, _reset_acceleration_rates); MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E, &planner.max_acceleration_mm_per_s2[E_AXIS], 100, 99000, _reset_acceleration_rates);
#endif #endif
@ -2460,8 +2472,11 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM_EDIT_CALLBACK(float62, MSG_E3STEPS, &planner.axis_steps_per_mm[E_AXIS + 2], 5, 9999, _planner_refresh_e2_positioning); MENU_ITEM_EDIT_CALLBACK(float62, MSG_E3STEPS, &planner.axis_steps_per_mm[E_AXIS + 2], 5, 9999, _planner_refresh_e2_positioning);
#if E_STEPPERS > 3 #if E_STEPPERS > 3
MENU_ITEM_EDIT_CALLBACK(float62, MSG_E4STEPS, &planner.axis_steps_per_mm[E_AXIS + 3], 5, 9999, _planner_refresh_e3_positioning); MENU_ITEM_EDIT_CALLBACK(float62, MSG_E4STEPS, &planner.axis_steps_per_mm[E_AXIS + 3], 5, 9999, _planner_refresh_e3_positioning);
#endif #if E_STEPPERS > 4
#endif MENU_ITEM_EDIT_CALLBACK(float62, MSG_E5STEPS, &planner.axis_steps_per_mm[E_AXIS + 4], 5, 9999, _planner_refresh_e4_positioning);
#endif // E_STEPPERS > 4
#endif // E_STEPPERS > 3
#endif // E_STEPPERS > 2
#else #else
MENU_ITEM_EDIT_CALLBACK(float62, MSG_ESTEPS, &planner.axis_steps_per_mm[E_AXIS], 5, 9999, _planner_refresh_positioning); MENU_ITEM_EDIT_CALLBACK(float62, MSG_ESTEPS, &planner.axis_steps_per_mm[E_AXIS], 5, 9999, _planner_refresh_positioning);
#endif #endif