Merge branch 'pr-lite-st7920-status' of github.com:marcio-ao/Marlin into pr-lite-st7920-status
This commit is contained in:
commit
c7513eb032
10
.travis.yml
10
.travis.yml
|
@ -67,7 +67,7 @@ script:
|
|||
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS
|
||||
- opt_enable BLINKM PCA9632 RGB_LED NEOPIXEL_LED AUTO_POWER_CONTROL
|
||||
- opt_enable AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
|
||||
- opt_enable_adv FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL
|
||||
- opt_enable_adv FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING
|
||||
- opt_set ABL_GRID_POINTS_X 16
|
||||
- opt_set ABL_GRID_POINTS_Y 16
|
||||
- opt_set_adv FANMUX0_PIN 53
|
||||
|
@ -84,13 +84,13 @@ script:
|
|||
- opt_set TEMP_SENSOR_4 999
|
||||
- opt_set TEMP_SENSOR_BED 1
|
||||
- opt_enable AUTO_BED_LEVELING_UBL DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT EEPROM_SETTINGS EEPROM_CHITCHAT G3D_PANEL SKEW_CORRECTION
|
||||
- opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC
|
||||
- opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# Add a Sled Z Probe, do non-segmented moves, use Japanese language
|
||||
# Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language
|
||||
#
|
||||
- opt_set LANGUAGE kana_utf8
|
||||
- opt_enable Z_PROBE_SLED
|
||||
- opt_enable Z_PROBE_SLED SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
|
||||
- opt_disable SEGMENT_LEVELED_MOVES
|
||||
- opt_enable_adv BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
|
@ -236,7 +236,7 @@ script:
|
|||
#
|
||||
- restore_configs
|
||||
- opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
|
||||
- opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES
|
||||
- opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
#
|
||||
# REPRAPWORLD_KEYPAD
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -999,6 +999,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -65,7 +65,7 @@ Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
|
|||
#ifdef DEBUG_MMC
|
||||
char buffer[80];
|
||||
sprintf(buffer, "SDRD: %d @ 0x%08x\n", nb_sector, addr);
|
||||
MYSERIAL0.print(buffer);
|
||||
SERIAL_PROTOCOL_P(0, buffer);
|
||||
#endif
|
||||
|
||||
// Start reading
|
||||
|
@ -99,7 +99,7 @@ Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector) {
|
|||
#ifdef DEBUG_MMC
|
||||
char buffer[80];
|
||||
sprintf(buffer, "SDWR: %d @ 0x%08x\n", nb_sector, addr);
|
||||
MYSERIAL0.print(buffer);
|
||||
SERIAL_PROTOCOL_P(0, buffer);
|
||||
#endif
|
||||
|
||||
if (!card.getSd2Card().writeStart(addr, nb_sector))
|
||||
|
|
|
@ -83,7 +83,7 @@ bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) {
|
|||
bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc, const bool writing/*=true*/) {
|
||||
for (int i = 0; i < size; i++) {
|
||||
uint8_t c = HAL_STM32F1_eeprom_content[pos + i];
|
||||
if (writing) value[i] = c`;
|
||||
if (writing) value[i] = c;
|
||||
crc16(crc, &c, 1);
|
||||
}
|
||||
pos += size;
|
||||
|
|
|
@ -834,6 +834,7 @@ void setup() {
|
|||
#endif
|
||||
|
||||
lcd_init();
|
||||
LCD_MESSAGEPGM(WELCOME_MSG);
|
||||
|
||||
#if ENABLED(SHOW_BOOTSCREEN)
|
||||
lcd_bootscreen();
|
||||
|
|
|
@ -208,6 +208,10 @@ extern millis_t max_inactive_time, stepper_inactive_time;
|
|||
#endif
|
||||
#endif
|
||||
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
extern uint8_t controllerFanSpeed;
|
||||
#endif
|
||||
|
||||
#if ENABLED(PID_EXTRUSION_SCALING)
|
||||
extern int lpq_len;
|
||||
#endif
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -999,6 +999,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1019,6 +1019,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -999,6 +999,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1133,6 +1133,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1006,6 +1006,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -999,6 +999,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -459,7 +462,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -490,6 +494,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -580,9 +587,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -642,6 +646,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -999,6 +999,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -999,6 +999,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -987,6 +987,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -108,7 +108,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1000,6 +1000,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -29,7 +29,6 @@
|
|||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* http://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
#include <avr/pgmspace.h>
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 62
|
||||
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -987,6 +987,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -998,6 +998,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -29,7 +29,6 @@
|
|||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* http://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
#include <avr/pgmspace.h>
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 64
|
||||
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1002,6 +1002,7 @@
|
|||
#define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh
|
||||
#define UBL_PROBE_PT_1_Y 180
|
||||
#define UBL_PROBE_PT_2_X 39
|
||||
|
||||
#define UBL_PROBE_PT_2_Y 20
|
||||
#define UBL_PROBE_PT_3_X 180
|
||||
#define UBL_PROBE_PT_3_Y 20
|
||||
|
@ -1009,6 +1010,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -991,6 +991,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -123,7 +123,7 @@
|
|||
// The following define selects which electronics board you have.
|
||||
// Please choose the name from boards.h that matches your setup
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_CREALITY_ENDER
|
||||
#define MOTHERBOARD BOARD_MELZI_CREALITY
|
||||
#endif
|
||||
|
||||
// Optional custom name for your RepStrap or other custom machine
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -981,6 +981,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -981,6 +981,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -132,13 +132,13 @@
|
|||
// The following define selects which electronics board you have.
|
||||
// Please choose the name from boards.h that matches your setup
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB // For people switching over to the Panucatt Re-ARM board
|
||||
//#define MOTHERBOARD BOARD_RAMPS_14_EFB // For unmodified printers using Atmega-2560 and RAMPS boards.
|
||||
//#define MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB // For people switching over to the Panucatt Re-ARM board
|
||||
#define MOTHERBOARD BOARD_RAMPS_14_EFB // For unmodified printers using Atmega-2560 and RAMPS boards.
|
||||
#endif
|
||||
|
||||
// Optional custom name for your RepStrap or other custom machine
|
||||
// Displayed in the LCD "Ready" message
|
||||
#define CUSTOM_MACHINE_NAME "FT-2020 v5"
|
||||
#define CUSTOM_MACHINE_NAME "FT-2020 v9"
|
||||
|
||||
// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
|
||||
// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
|
||||
|
@ -565,7 +565,7 @@
|
|||
* Override with M203
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
|
||||
*/
|
||||
#define DEFAULT_MAX_FEEDRATE { 250, 250, 6, 17 }
|
||||
#define DEFAULT_MAX_FEEDRATE { 250, 250, 2, 17 }
|
||||
|
||||
/**
|
||||
* Default Max Acceleration (change/s) change = mm/s
|
||||
|
@ -573,7 +573,7 @@
|
|||
* Override with M201
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
|
||||
*/
|
||||
#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 10, 750 }
|
||||
#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 4, 750 }
|
||||
|
||||
/**
|
||||
* Default Acceleration (change/s) change = mm/s
|
||||
|
@ -714,7 +714,7 @@
|
|||
*/
|
||||
#define X_PROBE_OFFSET_FROM_EXTRUDER 38 // X offset: -left +right [of the nozzle]
|
||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER -7 // Y offset: -front +behind [the nozzle]
|
||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER -10.4 // Z offset: -below +above [the nozzle]
|
||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER -10.35 // Z offset: -below +above [the nozzle]
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
#define XY_PROBE_SPEED 7500
|
||||
|
@ -744,8 +744,8 @@
|
|||
* Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
|
||||
* But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
|
||||
*/
|
||||
#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow
|
||||
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
|
||||
#define Z_CLEARANCE_DEPLOY_PROBE 3 // Z Clearance for Deploy/Stow
|
||||
#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points
|
||||
|
||||
// For M851 give a range for adjusting the Z probe offset
|
||||
#define Z_PROBE_OFFSET_RANGE_MIN -20
|
||||
|
@ -816,8 +816,8 @@
|
|||
#define X_MIN_POS 6
|
||||
#define Y_MIN_POS 3
|
||||
#define Z_MIN_POS 0
|
||||
#define X_MAX_POS 212
|
||||
#define Y_MAX_POS 190
|
||||
#define X_MAX_POS 207
|
||||
#define Y_MAX_POS 182
|
||||
#define Z_MAX_POS 175
|
||||
|
||||
/**
|
||||
|
@ -920,7 +920,7 @@
|
|||
// For Cartesian machines, instead of dividing moves on mesh boundaries,
|
||||
// split up moves into short segments like a Delta. This follows the
|
||||
// contours of the bed more closely than edge-to-edge straight moves.
|
||||
#define SEGMENT_LEVELED_MOVES
|
||||
//#define SEGMENT_LEVELED_MOVES
|
||||
#define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
|
||||
|
||||
/**
|
||||
|
@ -1005,6 +1005,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
@ -1159,7 +1162,7 @@
|
|||
//
|
||||
// M100 Free Memory Watcher
|
||||
//
|
||||
//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage
|
||||
#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
|
@ -1199,7 +1202,7 @@
|
|||
// Specify a park position as { X, Y, Z }
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
|
||||
#define NOZZLE_PARK_Z_FEEDRATE 8 // Z axis feedrate in mm/s (not used for delta printers)
|
||||
#define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers)
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
@ -1580,17 +1600,17 @@
|
|||
*/
|
||||
#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
//#define MAX7219_CLK_PIN 64 // on RAMPS // Configuration of the 3 pins to control the display
|
||||
//#define MAX7219_DIN_PIN 57 // on RAMPS
|
||||
//#define MAX7219_LOAD_PIN 44 // on RAMPS
|
||||
#define MAX7219_CLK_PIN 64 // on RAMPS // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // on RAMPS
|
||||
#define MAX7219_LOAD_PIN 44 // on RAMPS
|
||||
|
||||
//#define MAX7219_CLK_PIN 77 // on Re-ARM // Configuration of the 3 pins to control the display
|
||||
//#define MAX7219_DIN_PIN 78 // on Re-ARM
|
||||
//#define MAX7219_LOAD_PIN 79 // on Re-ARM
|
||||
|
||||
#define MAX7219_CLK_PIN 30 // for RAMPS E1 // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 34 // for RAMPS E1
|
||||
#define MAX7219_LOAD_PIN 36 // for RAMPS E1
|
||||
//#define MAX7219_CLK_PIN 30 // for RAMPS E1 // Configuration of the 3 pins to control the display
|
||||
//#define MAX7219_DIN_PIN 34 // for RAMPS E1
|
||||
//#define MAX7219_LOAD_PIN 36 // for RAMPS E1
|
||||
|
||||
/**
|
||||
* Sample debug features
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1014,6 +1014,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -999,6 +999,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1003,6 +1003,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -114,7 +114,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1011,6 +1011,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -129,7 +129,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1019,6 +1019,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
#define LCD_TIMEOUT_TO_STATUS 30000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -29,7 +29,6 @@
|
|||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* http://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
#include <avr/pgmspace.h>
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
|
||||
|
||||
|
|
|
@ -114,7 +114,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1027,6 +1027,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -29,7 +29,6 @@
|
|||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* http://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
#include <avr/pgmspace.h>
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -998,6 +998,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1003,6 +1003,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1003,6 +1003,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -999,6 +999,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -459,7 +462,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 5 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.2, 1.2, 1.2, 1.2, 1.2 } // MKS SBASE: 5
|
||||
|
||||
//===========================================================================
|
||||
|
@ -490,6 +494,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -580,9 +587,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -649,6 +653,22 @@
|
|||
#define DOGLCD_MOSI MOSI_PIN
|
||||
#endif
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -999,6 +999,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -997,6 +997,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -139,7 +139,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1011,6 +1011,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1002,6 +1002,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1030,6 +1030,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -999,6 +999,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -638,6 +642,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -125,7 +125,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1055,6 +1055,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -990,6 +990,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -999,6 +999,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
1833
Marlin/src/config/examples/Tronxy/XY100/Configuration.h
Normal file
1833
Marlin/src/config/examples/Tronxy/XY100/Configuration.h
Normal file
File diff suppressed because it is too large
Load diff
|
@ -990,6 +990,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -125,7 +125,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1029,6 +1029,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -198,7 +198,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -375,6 +375,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -471,7 +474,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -502,6 +506,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -592,9 +599,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -654,6 +658,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -999,6 +999,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -458,7 +461,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -489,6 +493,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -579,9 +586,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -641,6 +645,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -999,6 +999,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -460,7 +463,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -491,6 +495,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
#define LCD_TIMEOUT_TO_STATUS 60000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -581,9 +588,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -643,6 +647,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -999,6 +999,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1133,6 +1133,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -460,7 +463,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -491,6 +495,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -581,9 +588,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -643,6 +647,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -1124,6 +1124,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -460,7 +463,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -491,6 +495,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -581,9 +588,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -643,6 +647,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1132,6 +1132,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -460,7 +463,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -491,6 +495,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -581,9 +588,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -643,6 +647,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1121,6 +1121,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -460,7 +463,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -491,6 +495,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -581,9 +588,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -643,6 +647,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1124,6 +1124,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -185,7 +185,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -362,6 +362,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -460,7 +463,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -491,6 +495,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -581,9 +588,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -643,6 +647,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -113,7 +113,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1124,6 +1124,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
|
@ -190,7 +190,7 @@
|
|||
*/
|
||||
//#define USE_CONTROLLER_FAN
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
//#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan
|
||||
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
|
||||
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
|
||||
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
|
||||
#endif
|
||||
|
@ -367,6 +367,9 @@
|
|||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
|
||||
// Enable this if X or Y can't home without homing the other axis first.
|
||||
//#define CODEPENDENT_XY_HOMING
|
||||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
|
@ -465,7 +468,8 @@
|
|||
|
||||
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
|
||||
//===========================================================================
|
||||
|
@ -496,6 +500,9 @@
|
|||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
* Enable this feature to add LED Control to the LCD menu
|
||||
|
@ -586,9 +593,6 @@
|
|||
//#define LCD_PROGRESS_BAR_TEST
|
||||
#endif
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
|
@ -648,6 +652,22 @@
|
|||
// Swap the CW/CCW indicators in the graphics overlay
|
||||
//#define OVERLAY_GFX_REVERSE
|
||||
|
||||
#if ENABLED(U8GLIB_ST7920)
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
* Enable LIGHTWEIGHT_UI to use this special display mode.
|
||||
*
|
||||
* Since LIGHTWEIGHT_UI has limited space, the position and status
|
||||
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
|
||||
* length of time to display the status message before clearing.
|
||||
*/
|
||||
//#define LIGHTWEIGHT_UI
|
||||
#if ENABLED(LIGHTWEIGHT_UI)
|
||||
#define STATUS_EXPIRE_SECONDS 20
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
|
||||
// @section safety
|
||||
|
|
|
@ -109,7 +109,7 @@
|
|||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
* Serial port -1 is the USB emulated serial port, if avaialble.
|
||||
* Serial port -1 is the USB emulated serial port, if available.
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
|
@ -1133,6 +1133,9 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
//===========================================================================
|
||||
|
|
Some files were not shown because too many files have changed in this diff Show more
Loading…
Reference in a new issue