BigTreeTech SKR Mini E3 (#14457)
This commit is contained in:
Msq001
Scott Lahteine
parent
2f932a11b3
commit
c9be936d4a
|
|
@ -245,12 +245,13 @@
|
|||
#define BOARD_STM32F1R 1800 // STM32R Libmaple based STM32F1 controller
|
||||
#define BOARD_MALYAN_M200 1801 // STM32C8T6 Libmaple based stm32f1 controller
|
||||
#define BOARD_STM3R_MINI 1803 // STM32 Libmaple based stm32f1 controller
|
||||
#define BOARD_GTM32_PRO_VB 1805 // STM32f103VET6 controller
|
||||
#define BOARD_GTM32_PRO_VB 1805 // STM32F103VET6 controller
|
||||
#define BOARD_MORPHEUS 1806 // STM32F103C8/STM32F103CB Libmaple based stm32f1 controller
|
||||
#define BOARD_MKS_ROBIN 1808 // MKS Robin / STM32F103ZET6
|
||||
#define BOARD_MKS_ROBIN_MINI 1813 // MKS Robin Mini / STM32F103VET6
|
||||
#define BOARD_MKS_ROBIN_NANO 1812 // MKS Robin Nano / STM32F103VET6
|
||||
#define BOARD_BIGTREE_SKR_MINI_V1_1 1814 // STM32F103RC
|
||||
#define BOARD_BIGTREE_SKR_MINI_V1_1 1814 // BigTreeTech SKR Mini v1.1 / STM32F103RC
|
||||
#define BOARD_BIGTREE_SKR_MINI_E3 1815 // BigTreeTech SKR Mini E3 / STM32F103RC
|
||||
#define BOARD_JGAURORA_A5S_A1 1820 // JGAurora A5S A1 / STM32F103ZET6
|
||||
#define BOARD_FYSETC_AIO_II 1890 // FYSETC AIO_II
|
||||
#define BOARD_FYSETC_CHEETAH 1891 // FYSETC CHEETAH
|
||||
|
|
|
|||
|
|
@ -422,6 +422,8 @@
|
|||
#include "pins_STM3R_MINI.h" // STM32F1 env:STM32F1
|
||||
#elif MB(BIGTREE_SKR_MINI_V1_1)
|
||||
#include "pins_BIGTREE_SKR_MINI_V1_1.h" // STM32F1 env:BIGTREE_SKR_MINI
|
||||
#elif MB(BIGTREE_SKR_MINI_E3)
|
||||
#include "pins_BIGTREE_SKR_MINI_E3.h" // STM32F1 env:BIGTREE_SKR_MINI
|
||||
#elif MB(MALYAN_M200)
|
||||
#include "pins_MALYAN_M200.h" // STM32F1 env:malyanm200
|
||||
#elif MB(CHITU3D)
|
||||
|
|
|
|||
139
Marlin/src/pins/pins_BIGTREE_SKR_MINI_E3.h
Normal file
139
Marlin/src/pins/pins_BIGTREE_SKR_MINI_E3.h
Normal file
|
|
@ -0,0 +1,139 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef TARGET_STM32F1
|
||||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_NAME
|
||||
#define BOARD_NAME "BIGTREE SKR MINI E3"
|
||||
#endif
|
||||
|
||||
// Release PB3/PB4 (E0 STP/DIR) from JTAG pins
|
||||
#define DISABLE_JTAG
|
||||
|
||||
// Ignore temp readings during develpment.
|
||||
//#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN PA1
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PC0
|
||||
#define Y_STOP_PIN PC1
|
||||
#define Z_STOP_PIN PC2
|
||||
|
||||
//
|
||||
// Z Probe must be this pins
|
||||
//
|
||||
#define Z_MIN_PROBE_PIN PC14
|
||||
|
||||
//
|
||||
// Filament Runout Sensor
|
||||
//
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN PC15
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_ENABLE_PIN PB14
|
||||
#define X_STEP_PIN PB13
|
||||
#define X_DIR_PIN PB12
|
||||
|
||||
#define Y_ENABLE_PIN PB11
|
||||
#define Y_STEP_PIN PB10
|
||||
#define Y_DIR_PIN PB2
|
||||
|
||||
#define Z_ENABLE_PIN PB1
|
||||
#define Z_STEP_PIN PB0
|
||||
#define Z_DIR_PIN PC5
|
||||
|
||||
#define E0_ENABLE_PIN PD2
|
||||
#define E0_STEP_PIN PB3
|
||||
#define E0_DIR_PIN PB4
|
||||
|
||||
#if HAS_DRIVER(TMC2209)
|
||||
/**
|
||||
* TMC2209 stepper drivers
|
||||
* Hardware serial communication ports.
|
||||
*/
|
||||
#define X_HARDWARE_SERIAL Serial4
|
||||
#define Y_HARDWARE_SERIAL Serial4
|
||||
#define Z_HARDWARE_SERIAL Serial4
|
||||
#define E0_HARDWARE_SERIAL Serial4
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PA0 // Analog Input
|
||||
#define TEMP_BED_PIN PC3 // Analog Input
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PC8 // EXTRUDER
|
||||
#define HEATER_BED_PIN PC9 // BED
|
||||
#define FAN_PIN PA8
|
||||
|
||||
//
|
||||
// USB connect control
|
||||
//
|
||||
#define USB_CONNECT PC13
|
||||
#define USB_CONNECT_INVERTING false
|
||||
|
||||
#define SD_DETECT_PIN PC4
|
||||
|
||||
/**
|
||||
* _____
|
||||
* 5V | · · | GND
|
||||
* (LCD_EN) PB7 | · · | PB8 (LCD_RS)
|
||||
* (LCD_D4) PB9 | · · | PA10 (BTN_EN2)
|
||||
* RESET | · · | PA9 (BTN_EN1)
|
||||
* (BTN_ENC) PB6 | · · | PB5 (BEEPER)
|
||||
* -----
|
||||
* EXP1
|
||||
*/
|
||||
#if HAS_SPI_LCD
|
||||
#define BEEPER_PIN PB5
|
||||
#define BTN_ENC PB6
|
||||
|
||||
#if ENABLED(CR10_STOCKDISPLAY)
|
||||
#define LCD_PINS_RS PB8
|
||||
|
||||
#define BTN_EN1 PA9
|
||||
#define BTN_EN2 PA10
|
||||
|
||||
#define LCD_PINS_ENABLE PB7
|
||||
#define LCD_PINS_D4 PB9
|
||||
|
||||
#else
|
||||
#error "Only CR10_STOCKDISPLAY is currently supported on the BIGTREE_SKR_MINI_E3."
|
||||
#endif
|
||||
|
||||
#endif // HAS_SPI_LCD
|
||||
|
|
@ -48,10 +48,6 @@
|
|||
// Steppers
|
||||
//
|
||||
|
||||
/**
|
||||
* TODO: Currently using same Enable pin for all steppers.
|
||||
*/
|
||||
|
||||
#define X_STEP_PIN PC6
|
||||
#define X_DIR_PIN PC7
|
||||
#define X_ENABLE_PIN PB15
|
||||
|
|
|
|||
|
|
@ -169,16 +169,16 @@
|
|||
#define FAN_PIN P2_03
|
||||
#define HEATER_BED_PIN P2_05
|
||||
|
||||
/*
|
||||
| _____ _____
|
||||
| NC | · · | GND 5V | · · | GND
|
||||
| RESET | · · | 1.31(SD_DETECT) (LCD_D7) 1.23 | · · | 1.22 (LCD_D6)
|
||||
| (MOSI)0.18 | · · | 3.25(BTN_EN2) (LCD_D5) 1.21 | · · | 1.20 (LCD_D4)
|
||||
| (SD_SS)0.16 | · · | 3.26(BTN_EN1) (LCD_RS) 1.19 | · · | 1.18 (LCD_EN)
|
||||
| (SCK)0.15 | · · | 0.17(MISO) (BTN_ENC) 0.28 | · · | 1.30 (BEEPER)
|
||||
| ￣￣ ￣￣
|
||||
| EXP2 EXP1
|
||||
*/
|
||||
/**
|
||||
* _____ _____
|
||||
* NC | · · | GND 5V | · · | GND
|
||||
* RESET | · · | 1.31(SD_DETECT) (LCD_D7) 1.23 | · · | 1.22 (LCD_D6)
|
||||
* (MOSI)0.18 | · · | 3.25(BTN_EN2) (LCD_D5) 1.21 | · · | 1.20 (LCD_D4)
|
||||
* (SD_SS)0.16 | · · | 3.26(BTN_EN1) (LCD_RS) 1.19 | · · | 1.18 (LCD_EN)
|
||||
* (SCK)0.15 | · · | 0.17(MISO) (BTN_ENC) 0.28 | · · | 1.30 (BEEPER)
|
||||
* ----- -----
|
||||
* EXP2 EXP1
|
||||
*/
|
||||
#if HAS_SPI_LCD
|
||||
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
|
||||
#define BTN_ENC P0_28 // (58) open-drain
|
||||
|
|
|
|||
Loading…
Reference in a new issue