zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Fix up some units comments

Browse source
This commit is contained in:
Scott Lahteine 2018-10-06 19:45:40 -05:00
parent 65b8f3821b
commit ca0e308105
66 changed files with 212 additions and 212 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
Marlin/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/default/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Anet/A2/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Anet/A6/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Anet/A8/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Cartesio/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Einstart-S/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Felix/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -468,7 +468,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -469,7 +469,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/MakerParts/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/RigidBot/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/SCARA/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 180 // mm/m #define EXTRUDER_RUNOUT_SPEED 180 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/TheBorg/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
View file

@ -189,8 +189,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -477,7 +477,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

18
Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h
View file

@ -596,29 +596,29 @@
#if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU) #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
// Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
#define DELTA_CALIBRATION_RADIUS DELTA_PRINTABLE_RADIUS - MIN_PROBE_EDGE // mm #define DELTA_CALIBRATION_RADIUS DELTA_PRINTABLE_RADIUS - MIN_PROBE_EDGE // (mm)
// Set the steprate for papertest probing // Set the steprate for papertest probing
#define PROBE_MANUALLY_STEP 0.05 // mm #define PROBE_MANUALLY_STEP 0.05 // (mm)
#endif #endif
#if ENABLED(ANYCUBIC_KOSSEL_PLUS) #if ENABLED(ANYCUBIC_KOSSEL_PLUS)
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
#define DELTA_PRINTABLE_RADIUS 116.0 // mm #define DELTA_PRINTABLE_RADIUS 116.0 // (mm)
// Center-to-center distance of the holes in the diagonal push rods. // Center-to-center distance of the holes in the diagonal push rods.
#define DELTA_DIAGONAL_ROD 267 // mm #define DELTA_DIAGONAL_ROD 267 // (mm)
// Horizontal offset from middle of printer to smooth rod center. // Horizontal offset from middle of printer to smooth rod center.
#define DELTA_SMOOTH_ROD_OFFSET 186 // mm #define DELTA_SMOOTH_ROD_OFFSET 186 // (mm)
// Horizontal offset of the universal joints on the end effector. // Horizontal offset of the universal joints on the end effector.
#define DELTA_EFFECTOR_OFFSET 31 // mm #define DELTA_EFFECTOR_OFFSET 31 // (mm)
// Horizontal offset of the universal joints on the carriages. // Horizontal offset of the universal joints on the carriages.
#define DELTA_CARRIAGE_OFFSET 20.6 // mm #define DELTA_CARRIAGE_OFFSET 20.6 // (mm)
// Horizontal distance bridged by diagonal push rods when effector is centered. // Horizontal distance bridged by diagonal push rods when effector is centered.
#define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-(DELTA_EFFECTOR_OFFSET)-(DELTA_CARRIAGE_OFFSET)) //mm Get this value from auto calibrate #define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-(DELTA_EFFECTOR_OFFSET)-(DELTA_CARRIAGE_OFFSET)) //mm Get this value from auto calibrate
#else #else
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
#define DELTA_PRINTABLE_RADIUS 90.0 // mm #define DELTA_PRINTABLE_RADIUS 90.0 // (mm)
// Center-to-center distance of the holes in the diagonal push rods. // Center-to-center distance of the holes in the diagonal push rods.
#define DELTA_DIAGONAL_ROD 218.0 // mm #define DELTA_DIAGONAL_ROD 218.0 // (mm)
// Horizontal distance bridged by diagonal push rods when effector is centered. // Horizontal distance bridged by diagonal push rods when effector is centered.
#define DELTA_RADIUS 97.0 //mm Get this value from auto calibrate #define DELTA_RADIUS 97.0 //mm Get this value from auto calibrate
#endif #endif

6
Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -466,7 +466,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

8
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
View file

@ -562,16 +562,16 @@
#if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU) #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
// Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
#define DELTA_CALIBRATION_RADIUS 73.5 // mm #define DELTA_CALIBRATION_RADIUS 73.5 // (mm)
// Set the steprate for papertest probing // Set the steprate for papertest probing
#define PROBE_MANUALLY_STEP 0.05 // mm #define PROBE_MANUALLY_STEP 0.05 // (mm)
#endif #endif
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
#define DELTA_PRINTABLE_RADIUS 85.0 // mm #define DELTA_PRINTABLE_RADIUS 85.0 // (mm)
// Center-to-center distance of the holes in the diagonal push rods. // Center-to-center distance of the holes in the diagonal push rods.
#define DELTA_DIAGONAL_ROD 218.0 // mm #define DELTA_DIAGONAL_ROD 218.0 // (mm)
// height from z=0 to home position // height from z=0 to home position
#define DELTA_HEIGHT 295.00 // get this value from auto calibrate #define DELTA_HEIGHT 295.00 // get this value from auto calibrate

6
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -466,7 +466,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

8
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
View file

@ -562,16 +562,16 @@
#if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU) #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
// Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
#define DELTA_CALIBRATION_RADIUS 63 // mm #define DELTA_CALIBRATION_RADIUS 63 // (mm)
// Set the steprate for papertest probing // Set the steprate for papertest probing
#define PROBE_MANUALLY_STEP 0.05 // mm #define PROBE_MANUALLY_STEP 0.05 // (mm)
#endif #endif
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
#define DELTA_PRINTABLE_RADIUS 70.0 // mm #define DELTA_PRINTABLE_RADIUS 70.0 // (mm)
// Center-to-center distance of the holes in the diagonal push rods. // Center-to-center distance of the holes in the diagonal push rods.
#define DELTA_DIAGONAL_ROD 218.0 // mm #define DELTA_DIAGONAL_ROD 218.0 // (mm)
// height from z=0 to home position // height from z=0 to home position
#define DELTA_HEIGHT 317.94 // get this value from auto calibrate #define DELTA_HEIGHT 317.94 // get this value from auto calibrate

6
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -466,7 +466,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

8
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
View file

@ -562,16 +562,16 @@
#if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU) #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
// Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
#define DELTA_CALIBRATION_RADIUS 73.5 // mm #define DELTA_CALIBRATION_RADIUS 73.5 // (mm)
// Set the steprate for papertest probing // Set the steprate for papertest probing
#define PROBE_MANUALLY_STEP 0.05 // mm #define PROBE_MANUALLY_STEP 0.05 // (mm)
#endif #endif
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
#define DELTA_PRINTABLE_RADIUS 85.0 // mm #define DELTA_PRINTABLE_RADIUS 85.0 // (mm)
// Center-to-center distance of the holes in the diagonal push rods. // Center-to-center distance of the holes in the diagonal push rods.
#define DELTA_DIAGONAL_ROD 218.0 // mm #define DELTA_DIAGONAL_ROD 218.0 // (mm)
// height from z=0 to home position // height from z=0 to home position
#define DELTA_HEIGHT 280.00 // get this value from auto calibrate #define DELTA_HEIGHT 280.00 // get this value from auto calibrate

6
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -466,7 +466,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

8
Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
View file

@ -567,16 +567,16 @@
#if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU) #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
// Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
#define DELTA_CALIBRATION_RADIUS 121.5 // mm #define DELTA_CALIBRATION_RADIUS 121.5 // (mm)
// Set the steprate for papertest probing // Set the steprate for papertest probing
#define PROBE_MANUALLY_STEP 0.05 // mm #define PROBE_MANUALLY_STEP 0.05 // (mm)
#endif #endif
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
#define DELTA_PRINTABLE_RADIUS 151.0 // mm #define DELTA_PRINTABLE_RADIUS 151.0 // (mm)
// Center-to-center distance of the holes in the diagonal push rods. // Center-to-center distance of the holes in the diagonal push rods.
#define DELTA_DIAGONAL_ROD 356.5 // mm #define DELTA_DIAGONAL_ROD 356.5 // (mm)
// height from z=0 to home position // height from z=0 to home position
#define DELTA_HEIGHT 352.00 // get this value from auto calibrate #define DELTA_HEIGHT 352.00 // get this value from auto calibrate

8
Marlin/src/config/examples/delta/generic/Configuration.h
View file

@ -552,16 +552,16 @@
#if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU) #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
// Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
#define DELTA_CALIBRATION_RADIUS 121.5 // mm #define DELTA_CALIBRATION_RADIUS 121.5 // (mm)
// Set the steprate for papertest probing // Set the steprate for papertest probing
#define PROBE_MANUALLY_STEP 0.05 // mm #define PROBE_MANUALLY_STEP 0.05 // (mm)
#endif #endif
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
#define DELTA_PRINTABLE_RADIUS 140.0 // mm #define DELTA_PRINTABLE_RADIUS 140.0 // (mm)
// Center-to-center distance of the holes in the diagonal push rods. // Center-to-center distance of the holes in the diagonal push rods.
#define DELTA_DIAGONAL_ROD 250.0 // mm #define DELTA_DIAGONAL_ROD 250.0 // (mm)
// height from z=0 to home position // height from z=0 to home position
#define DELTA_HEIGHT 250.00 // get this value from auto calibrate #define DELTA_HEIGHT 250.00 // get this value from auto calibrate

6
Marlin/src/config/examples/delta/generic/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -466,7 +466,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

8
Marlin/src/config/examples/delta/kossel_mini/Configuration.h
View file

@ -552,16 +552,16 @@
#if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU) #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
// Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
#define DELTA_CALIBRATION_RADIUS 78.0 // mm #define DELTA_CALIBRATION_RADIUS 78.0 // (mm)
// Set the steprate for papertest probing // Set the steprate for papertest probing
#define PROBE_MANUALLY_STEP 0.05 // mm #define PROBE_MANUALLY_STEP 0.05 // (mm)
#endif #endif
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
#define DELTA_PRINTABLE_RADIUS 90.0 // mm #define DELTA_PRINTABLE_RADIUS 90.0 // (mm)
// Center-to-center distance of the holes in the diagonal push rods. // Center-to-center distance of the holes in the diagonal push rods.
#define DELTA_DIAGONAL_ROD 215.0 // mm #define DELTA_DIAGONAL_ROD 215.0 // (mm)
// height from z=0 to home position // height from z=0 to home position
#define DELTA_HEIGHT 250.00 // get this value from auto calibrate #define DELTA_HEIGHT 250.00 // get this value from auto calibrate

6
Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -466,7 +466,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

8
Marlin/src/config/examples/delta/kossel_pro/Configuration.h
View file

@ -538,16 +538,16 @@
#if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU) #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
// Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
#define DELTA_CALIBRATION_RADIUS 110.0 // mm #define DELTA_CALIBRATION_RADIUS 110.0 // (mm)
// Set the steprate for papertest probing // Set the steprate for papertest probing
#define PROBE_MANUALLY_STEP 0.05 // mm #define PROBE_MANUALLY_STEP 0.05 // (mm)
#endif #endif
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
#define DELTA_PRINTABLE_RADIUS 127.0 // mm #define DELTA_PRINTABLE_RADIUS 127.0 // (mm)
// Center-to-center distance of the holes in the diagonal push rods. // Center-to-center distance of the holes in the diagonal push rods.
#define DELTA_DIAGONAL_ROD 301.0 // mm #define DELTA_DIAGONAL_ROD 301.0 // (mm)
// height from z=0 to home position // height from z=0 to home position
#define DELTA_HEIGHT 277.00 // get this value from auto calibrate #define DELTA_HEIGHT 277.00 // get this value from auto calibrate

8
Marlin/src/config/examples/delta/kossel_xl/Configuration.h
View file

@ -556,16 +556,16 @@
#if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU) #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
// Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
#define DELTA_CALIBRATION_RADIUS 121.5 // mm #define DELTA_CALIBRATION_RADIUS 121.5 // (mm)
// Set the steprate for papertest probing // Set the steprate for papertest probing
#define PROBE_MANUALLY_STEP 0.05 // mm #define PROBE_MANUALLY_STEP 0.05 // (mm)
#endif #endif
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
#define DELTA_PRINTABLE_RADIUS 140.0 // mm #define DELTA_PRINTABLE_RADIUS 140.0 // (mm)
// Center-to-center distance of the holes in the diagonal push rods. // Center-to-center distance of the holes in the diagonal push rods.
#define DELTA_DIAGONAL_ROD 319.5 // mm #define DELTA_DIAGONAL_ROD 319.5 // (mm)
// height from z=0 to home position // height from z=0 to home position
#define DELTA_HEIGHT 380.00 // get this value from auto calibrate #define DELTA_HEIGHT 380.00 // get this value from auto calibrate

6
Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -466,7 +466,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/makibox/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting

6
Marlin/src/config/examples/wt150/Configuration_adv.h
View file

@ -176,8 +176,8 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
// @section temperature // @section temperature
@ -464,7 +464,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
// //
// Use Junction Deviation instead of traditional Jerk Limiting // Use Junction Deviation instead of traditional Jerk Limiting